pcsc-lite →
1.8.10-1 →
armhf → 2013-10-30 05:35:22
sbuild (Debian sbuild) 0.63.2 (18 Aug 2012) on testbuildd.raspbian.org
╔══════════════════════════════════════════════════════════════════════════════╗
║ pcsc-lite 1.8.10-1 (armhf) 30 Oct 2013 05:31 ║
╚══════════════════════════════════════════════════════════════════════════════╝
Package: pcsc-lite
Version: 1.8.10-1
Source Version: 1.8.10-1
Distribution: jessie-staging
Machine Architecture: armhf
Host Architecture: armhf
Build Architecture: armhf
I: NOTICE: Log filtering will replace 'build/pcsc-lite-hnxgbZ/pcsc-lite-1.8.10' with '«PKGBUILDDIR»'
I: NOTICE: Log filtering will replace 'build/pcsc-lite-hnxgbZ' with '«BUILDDIR»'
I: NOTICE: Log filtering will replace 'var/lib/schroot/mount/jessie-staging-armhf-sbuild-8b6452de-b63a-45a4-81c9-d63e57f37e67' with '«CHROOT»'
┌──────────────────────────────────────────────────────────────────────────────┐
│ Update chroot │
└──────────────────────────────────────────────────────────────────────────────┘
Get:1 http://172.17.0.1 jessie-staging InRelease [11.3 kB]
Get:2 http://172.17.0.1 jessie-staging/main Sources [6958 kB]
Get:3 http://172.17.0.1 jessie-staging/main armhf Packages [8082 kB]
Ign http://172.17.0.1 jessie-staging/main Translation-en
Fetched 15.1 MB in 47s (317 kB/s)
Reading package lists...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Fetch source files │
└──────────────────────────────────────────────────────────────────────────────┘
Check APT
─────────
Checking available source versions...
Download source files with APT
──────────────────────────────
Reading package lists...
Building dependency tree...
Reading state information...
NOTICE: 'pcsc-lite' packaging is maintained in the 'Svn' version control system at:
svn://anonscm.debian.org/collab-maint/deb-maint/pcsc-lite/trunk
Need to get 579 kB of source archives.
Get:1 http://172.17.0.1/private/ jessie-staging/main pcsc-lite 1.8.10-1 (dsc) [1526 B]
Get:2 http://172.17.0.1/private/ jessie-staging/main pcsc-lite 1.8.10-1 (tar) [562 kB]
Get:3 http://172.17.0.1/private/ jessie-staging/main pcsc-lite 1.8.10-1 (diff) [15.8 kB]
Fetched 579 kB in 1s (477 kB/s)
Download complete and in download only mode
Check arch
──────────
Merged Build-Depends: build-essential, fakeroot
Filtered Build-Depends: build-essential, fakeroot
dpkg-deb: building package `sbuild-build-depends-core-dummy' in `/«BUILDDIR»/resolver-WoQMfm/apt_archive/sbuild-build-depends-core-dummy.deb'.
OK
Reading package lists...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Install core build dependencies (apt-based resolver) │
└──────────────────────────────────────────────────────────────────────────────┘
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
sbuild-build-depends-core-dummy
debconf: delaying package configuration, since apt-utils is not installed
0 upgraded, 1 newly installed, 0 to remove and 2 not upgraded.
Need to get 0 B/702 B of archives.
After this operation, 0 B of additional disk space will be used.
Selecting previously unselected package sbuild-build-depends-core-dummy.
(Reading database ... 12159 files and directories currently installed.)
Unpacking sbuild-build-depends-core-dummy (from .../sbuild-build-depends-core-dummy.deb) ...
Setting up sbuild-build-depends-core-dummy (0.invalid.0) ...
Merged Build-Depends: base-files, base-passwd, bash, bsdutils, coreutils, dash, debianutils, diffutils, dpkg, e2fsprogs, findutils, grep, gzip, hostname, libc-bin, login, mount, ncurses-base, ncurses-bin, perl-base, sed, sysvinit, sysvinit-utils, tar, util-linux, libc6-dev | libc-dev, gcc (>= 4:4.4.3), g++ (>= 4:4.4.3), make, dpkg-dev (>= 1.13.5), debhelper (>= 9), flex, autotools-dev, libudev-dev, pkg-config, dpkg-dev (>= 1.16.1~), dh-systemd (>= 1.4)
Filtered Build-Depends: base-files, base-passwd, bash, bsdutils, coreutils, dash, debianutils, diffutils, dpkg, e2fsprogs, findutils, grep, gzip, hostname, libc-bin, login, mount, ncurses-base, ncurses-bin, perl-base, sed, sysvinit, sysvinit-utils, tar, util-linux, libc6-dev, gcc (>= 4:4.4.3), g++ (>= 4:4.4.3), make, dpkg-dev (>= 1.13.5), debhelper (>= 9), flex, autotools-dev, libudev-dev, pkg-config, dpkg-dev (>= 1.16.1~), dh-systemd (>= 1.4)
dpkg-deb: building package `sbuild-build-depends-pcsc-lite-dummy' in `/«BUILDDIR»/resolver-2cIaUL/apt_archive/sbuild-build-depends-pcsc-lite-dummy.deb'.
OK
Reading package lists...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Install pcsc-lite build dependencies (apt-based resolver) │
└──────────────────────────────────────────────────────────────────────────────┘
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
autotools-dev bsdmainutils debhelper dh-systemd file flex gettext
gettext-base groff-base intltool-debian libasprintf0c2 libcroco3 libffi6
libglib2.0-0 libmagic1 libpipeline1 libpopt0 libsigsegv2 libudev-dev
libunistring0 libxml2 m4 man-db pkg-config po-debconf
Suggested packages:
wamerican wordlist whois vacation dh-make bison gettext-doc groff less
www-browser libmail-box-perl
Recommended packages:
curl wget lynx-cur autopoint libasprintf-dev libgettextpo-dev
libglib2.0-data shared-mime-info xml-core libmail-sendmail-perl
The following NEW packages will be installed:
autotools-dev bsdmainutils debhelper dh-systemd file flex gettext
gettext-base groff-base intltool-debian libasprintf0c2 libcroco3 libffi6
libglib2.0-0 libmagic1 libpipeline1 libpopt0 libsigsegv2 libudev-dev
libunistring0 libxml2 m4 man-db pkg-config po-debconf
sbuild-build-depends-pcsc-lite-dummy
0 upgraded, 26 newly installed, 0 to remove and 2 not upgraded.
Need to get 9178 kB/9179 kB of archives.
After this operation, 24.5 MB of additional disk space will be used.
Get:1 http://172.17.0.1/private/ jessie-staging/main libpipeline1 armhf 1.2.4-1 [36.9 kB]
Get:2 http://172.17.0.1/private/ jessie-staging/main libpopt0 armhf 1.16-7 [56.5 kB]
Get:3 http://172.17.0.1/private/ jessie-staging/main groff-base armhf 1.22.2-3 [666 kB]
Get:4 http://172.17.0.1/private/ jessie-staging/main bsdmainutils armhf 9.0.5 [206 kB]
Get:5 http://172.17.0.1/private/ jessie-staging/main man-db armhf 2.6.5-2 [949 kB]
Get:6 http://172.17.0.1/private/ jessie-staging/main libasprintf0c2 armhf 0.18.3.1-1 [29.4 kB]
Get:7 http://172.17.0.1/private/ jessie-staging/main libmagic1 armhf 1:5.14-2 [213 kB]
Get:8 http://172.17.0.1/private/ jessie-staging/main libxml2 armhf 2.9.1+dfsg1-3 [836 kB]
Get:9 http://172.17.0.1/private/ jessie-staging/main libsigsegv2 armhf 2.10-2 [29.2 kB]
Get:10 http://172.17.0.1/private/ jessie-staging/main m4 armhf 1.4.16-5 [245 kB]
Get:11 http://172.17.0.1/private/ jessie-staging/main flex armhf 2.5.35-10.1 [321 kB]
Get:12 http://172.17.0.1/private/ jessie-staging/main libffi6 armhf 3.0.13-4 [19.8 kB]
Get:13 http://172.17.0.1/private/ jessie-staging/main libglib2.0-0 armhf 2.36.4-1 [1907 kB]
Get:14 http://172.17.0.1/private/ jessie-staging/main libcroco3 armhf 0.6.8-2 [119 kB]
Get:15 http://172.17.0.1/private/ jessie-staging/main libunistring0 armhf 0.9.3-5 [408 kB]
Get:16 http://172.17.0.1/private/ jessie-staging/main file armhf 1:5.14-2 [53.8 kB]
Get:17 http://172.17.0.1/private/ jessie-staging/main gettext-base armhf 0.18.3.1-1 [136 kB]
Get:18 http://172.17.0.1/private/ jessie-staging/main autotools-dev all 20130810.1 [69.6 kB]
Get:19 http://172.17.0.1/private/ jessie-staging/main gettext armhf 0.18.3.1-1 [1837 kB]
Get:20 http://172.17.0.1/private/ jessie-staging/main intltool-debian all 0.35.0+20060710.1 [29.8 kB]
Get:21 http://172.17.0.1/private/ jessie-staging/main po-debconf all 1.0.16+nmu2 [223 kB]
Get:22 http://172.17.0.1/private/ jessie-staging/main debhelper all 9.20130921 [688 kB]
Get:23 http://172.17.0.1/private/ jessie-staging/main libudev-dev armhf 204-5 [26.5 kB]
Get:24 http://172.17.0.1/private/ jessie-staging/main pkg-config armhf 0.26-1 [56.9 kB]
Get:25 http://172.17.0.1/private/ jessie-staging/main dh-systemd all 1.11 [12.8 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 9178 kB in 8s (1058 kB/s)
Selecting previously unselected package libpipeline1:armhf.
(Reading database ... 12159 files and directories currently installed.)
Unpacking libpipeline1:armhf (from .../libpipeline1_1.2.4-1_armhf.deb) ...
Selecting previously unselected package libpopt0:armhf.
Unpacking libpopt0:armhf (from .../libpopt0_1.16-7_armhf.deb) ...
Selecting previously unselected package groff-base.
Unpacking groff-base (from .../groff-base_1.22.2-3_armhf.deb) ...
Selecting previously unselected package bsdmainutils.
Unpacking bsdmainutils (from .../bsdmainutils_9.0.5_armhf.deb) ...
Selecting previously unselected package man-db.
Unpacking man-db (from .../man-db_2.6.5-2_armhf.deb) ...
Selecting previously unselected package libasprintf0c2:armhf.
Unpacking libasprintf0c2:armhf (from .../libasprintf0c2_0.18.3.1-1_armhf.deb) ...
Selecting previously unselected package libmagic1:armhf.
Unpacking libmagic1:armhf (from .../libmagic1_1%3a5.14-2_armhf.deb) ...
Selecting previously unselected package libxml2:armhf.
Unpacking libxml2:armhf (from .../libxml2_2.9.1+dfsg1-3_armhf.deb) ...
Selecting previously unselected package libsigsegv2:armhf.
Unpacking libsigsegv2:armhf (from .../libsigsegv2_2.10-2_armhf.deb) ...
Selecting previously unselected package m4.
Unpacking m4 (from .../archives/m4_1.4.16-5_armhf.deb) ...
Selecting previously unselected package flex.
Unpacking flex (from .../flex_2.5.35-10.1_armhf.deb) ...
Selecting previously unselected package libffi6:armhf.
Unpacking libffi6:armhf (from .../libffi6_3.0.13-4_armhf.deb) ...
Selecting previously unselected package libglib2.0-0:armhf.
Unpacking libglib2.0-0:armhf (from .../libglib2.0-0_2.36.4-1_armhf.deb) ...
Selecting previously unselected package libcroco3:armhf.
Unpacking libcroco3:armhf (from .../libcroco3_0.6.8-2_armhf.deb) ...
Selecting previously unselected package libunistring0:armhf.
Unpacking libunistring0:armhf (from .../libunistring0_0.9.3-5_armhf.deb) ...
Selecting previously unselected package file.
Unpacking file (from .../file_1%3a5.14-2_armhf.deb) ...
Selecting previously unselected package gettext-base.
Unpacking gettext-base (from .../gettext-base_0.18.3.1-1_armhf.deb) ...
Selecting previously unselected package autotools-dev.
Unpacking autotools-dev (from .../autotools-dev_20130810.1_all.deb) ...
Selecting previously unselected package gettext.
Unpacking gettext (from .../gettext_0.18.3.1-1_armhf.deb) ...
Selecting previously unselected package intltool-debian.
Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ...
Selecting previously unselected package po-debconf.
Unpacking po-debconf (from .../po-debconf_1.0.16+nmu2_all.deb) ...
Selecting previously unselected package debhelper.
Unpacking debhelper (from .../debhelper_9.20130921_all.deb) ...
Selecting previously unselected package libudev-dev.
Unpacking libudev-dev (from .../libudev-dev_204-5_armhf.deb) ...
Selecting previously unselected package pkg-config.
Unpacking pkg-config (from .../pkg-config_0.26-1_armhf.deb) ...
Selecting previously unselected package dh-systemd.
Unpacking dh-systemd (from .../dh-systemd_1.11_all.deb) ...
Selecting previously unselected package sbuild-build-depends-pcsc-lite-dummy.
Unpacking sbuild-build-depends-pcsc-lite-dummy (from .../sbuild-build-depends-pcsc-lite-dummy.deb) ...
Setting up libpipeline1:armhf (1.2.4-1) ...
Setting up libpopt0:armhf (1.16-7) ...
Setting up groff-base (1.22.2-3) ...
Setting up bsdmainutils (9.0.5) ...
update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode
update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode
Setting up man-db (2.6.5-2) ...
Not building database; man-db/auto-update is not 'true'.
Setting up libasprintf0c2:armhf (0.18.3.1-1) ...
Setting up libmagic1:armhf (1:5.14-2) ...
Setting up libxml2:armhf (2.9.1+dfsg1-3) ...
Setting up libsigsegv2:armhf (2.10-2) ...
Setting up m4 (1.4.16-5) ...
Setting up flex (2.5.35-10.1) ...
Setting up libffi6:armhf (3.0.13-4) ...
Setting up libglib2.0-0:armhf (2.36.4-1) ...
No schema files found: doing nothing.
Setting up libcroco3:armhf (0.6.8-2) ...
Setting up libunistring0:armhf (0.9.3-5) ...
Setting up file (1:5.14-2) ...
Setting up gettext-base (0.18.3.1-1) ...
Setting up autotools-dev (20130810.1) ...
Setting up gettext (0.18.3.1-1) ...
Setting up intltool-debian (0.35.0+20060710.1) ...
Setting up po-debconf (1.0.16+nmu2) ...
Setting up debhelper (9.20130921) ...
Setting up libudev-dev (204-5) ...
Setting up pkg-config (0.26-1) ...
Setting up dh-systemd (1.11) ...
Setting up sbuild-build-depends-pcsc-lite-dummy (0.invalid.0) ...
Processing triggers for libc-bin ...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Build environment │
└──────────────────────────────────────────────────────────────────────────────┘
Kernel: Linux 3.11.0-armv7-x13 armhf (armv7l)
Toolchain package versions: binutils_2.23.90.20130927-1 dpkg-dev_1.16.12 g++-4.6_4.6.4-4+rpi1 g++-4.8_4.8.1-10+rpi1 gcc-4.6_4.6.4-4+rpi1 gcc-4.8_4.8.1-10+rpi1 libc6-dev_2.17-93 libstdc++-4.8-dev_4.8.1-10+rpi1 libstdc++6_4.8.1-10+rpi1 libstdc++6-4.6-dev_4.6.4-4+rpi1 linux-libc-dev_3.10.1-1+rpi1+b2
Package versions: apt_0.9.11.4+rpi1 autotools-dev_20130810.1 base-files_7.2+rpi1 base-passwd_3.5.28 bash_4.2+dfsg-1 binutils_2.23.90.20130927-1 bsdmainutils_9.0.5 bsdutils_1:2.20.1-5.5 build-essential_11.6 bzip2_1.0.6-5 coreutils_8.21-1 cpio_2.11+dfsg-1 cpp_4:4.8.1-3 cpp-4.6_4.6.4-4+rpi1 cpp-4.8_4.8.1-10+rpi1 dash_0.5.7-3 debconf_1.5.51 debfoster_2.7-1.2 debhelper_9.20130921 debianutils_4.4 dh-systemd_1.11 diffutils_1:3.3-1 dpkg_1.16.12 dpkg-dev_1.16.12 e2fslibs_1.42.8-1 e2fsprogs_1.42.8-1 fakeroot_1.18.4-2 file_1:5.14-2 findutils_4.4.2-6 flex_2.5.35-10.1 g++_4:4.8.1-3 g++-4.6_4.6.4-4+rpi1 g++-4.8_4.8.1-10+rpi1 gcc_4:4.8.1-3 gcc-4.5-base_4.5.3-12+rpi1 gcc-4.6_4.6.4-4+rpi1 gcc-4.6-base_4.6.4-4+rpi1 gcc-4.7-base_4.7.3-4+rpi1 gcc-4.8_4.8.1-10+rpi1 gcc-4.8-base_4.8.1-10+rpi1 gettext_0.18.3.1-1 gettext-base_0.18.3.1-1 gnupg_1.4.15-1.1 gpgv_1.4.15-1.1 grep_2.14-4 groff-base_1.22.2-3 gzip_1.6-2 hostname_3.14 initramfs-tools_0.114 initscripts_2.88dsf-43 insserv_1.14.0-5 intltool-debian_0.35.0+20060710.1 klibc-utils_2.0.1-3.1+rpi1 kmod_9-3 libacl1_2.2.52-1 libapt-pkg4.12_0.9.11.4+rpi1 libarchive-extract-perl_0.68-1 libasan0_4.8.1-10+rpi1 libasprintf0c2_0.18.3.1-1 libatomic1_4.8.1-10+rpi1 libattr1_1:2.4.47-1 libblkid1_2.20.1-5.5 libbz2-1.0_1.0.6-5 libc-bin_2.17-93 libc-dev-bin_2.17-93 libc6_2.17-93 libc6-dev_2.17-93 libcap2_1:2.22-1.2 libclass-isa-perl_0.36-5 libcloog-isl4_0.18.0-2 libcomerr2_1.42.8-1 libcroco3_0.6.8-2 libdb5.1_5.1.29-6 libdbus-1-3_1.6.16-1 libdpkg-perl_1.16.12 libffi6_3.0.13-4 libgc1c2_1:7.2d-5 libgcc-4.8-dev_4.8.1-10+rpi1 libgcc1_1:4.8.1-10+rpi1 libgdbm3_1.8.3-12 libglib2.0-0_2.36.4-1 libgmp10_2:5.1.2+dfsg-3 libgomp1_4.8.1-10+rpi1 libisl10_0.11.2-1 libklibc_2.0.1-3.1+rpi1 libkmod2_9-3 liblog-message-simple-perl_0.10-1 liblzma5_5.1.1alpha+20120614-2 libmagic1_1:5.14-2 libmodule-pluggable-perl_4.8-1 libmount1_2.20.1-5.5 libmpc2_0.9-4 libmpc3_1.0.1-1 libmpfr4_3.1.1-2 libncurses5_5.9+20130608-1 libncursesw5_5.9+20130608-1 libpam-modules_1.1.3-9 libpam-modules-bin_1.1.3-9 libpam-runtime_1.1.3-9 libpam0g_1.1.3-9 libpcre3_1:8.31-2 libpipeline1_1.2.4-1 libpod-latex-perl_0.61-1 libpopt0_1.16-7 libprocps0_1:3.3.4-2 libreadline6_6.2+dfsg-0.1 libselinux1_2.1.13-3+rpi1 libsemanage-common_2.1.10-3+rpi1 libsemanage1_2.1.10-3+rpi1 libsepol1_2.1.9-2 libsigsegv2_2.10-2 libslang2_2.2.4-15 libss2_1.42.8-1 libstdc++-4.8-dev_4.8.1-10+rpi1 libstdc++6_4.8.1-10+rpi1 libstdc++6-4.6-dev_4.6.4-4+rpi1 libswitch-perl_2.16-2 libterm-ui-perl_0.38-1 libtimedate-perl_1.2000-1 libtinfo5_5.9+20130608-1 libudev-dev_204-5 libudev0_175-7.2 libudev1_204-5 libunistring0_0.9.3-5 libusb-0.1-4_2:0.1.12-23.2 libustr-1.0-1_1.0.4-3 libuuid1_2.20.1-5.5 libxml2_2.9.1+dfsg1-3 linux-libc-dev_3.10.1-1+rpi1+b2 login_1:4.1.5.1-1 lsb-base_4.1+Debian12+rpi1 m4_1.4.16-5 make_3.81-8.2 makedev_2.3.1-93 man-db_2.6.5-2 mawk_1.3.3-17 mount_2.20.1-5.5 multiarch-support_2.17-93 ncurses-base_5.9+20130608-1 ncurses-bin_5.9+20130608-1 passwd_1:4.1.5.1-1 patch_2.7.1-3 perl_5.18.1-4 perl-base_5.18.1-4 perl-modules_5.18.1-4 pkg-config_0.26-1 plymouth_0.8.8-6+deb8u3 po-debconf_1.0.16+nmu2 procps_1:3.3.4-2 raspbian-archive-keyring_20120528.2 readline-common_6.2+dfsg-0.1 sbuild-build-depends-core-dummy_0.invalid.0 sbuild-build-depends-pcsc-lite-dummy_0.invalid.0 sed_4.2.2-2 sensible-utils_0.0.9 sysv-rc_2.88dsf-43 sysvinit_2.88dsf-43 sysvinit-utils_2.88dsf-43 tar_1.26+dfsg-8 tzdata_2013d-1 udev_204-5 util-linux_2.20.1-5.5 xz-utils_5.1.1alpha+20120614-2 zlib1g_1:1.2.8.dfsg-1
┌──────────────────────────────────────────────────────────────────────────────┐
│ Build │
└──────────────────────────────────────────────────────────────────────────────┘
Unpack source
─────────────
gpgv: keyblock resource `/sbuild-nonexistent/.gnupg/trustedkeys.gpg': file open error
gpgv: Signature made Sat Oct 19 16:52:04 2013 UTC using DSA key ID E07F1CF9
gpgv: Can't check signature: public key not found
dpkg-source: warning: failed to verify signature on ./pcsc-lite_1.8.10-1.dsc
dpkg-source: info: extracting pcsc-lite in pcsc-lite-1.8.10
dpkg-source: info: unpacking pcsc-lite_1.8.10.orig.tar.bz2
dpkg-source: info: unpacking pcsc-lite_1.8.10-1.debian.tar.gz
Check disc space
────────────────
Sufficient free space for build
User Environment
────────────────
APT_CONFIG=/var/lib/sbuild/apt.conf
DEB_BUILD_OPTIONS=parallel=4
HOME=/sbuild-nonexistent
LANG=en_US.UTF-8
LC_ALL=POSIX
LOGNAME=root
LS_OPTIONS=--color=auto
MAIL=/var/mail/root
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
PWD=/root
SCHROOT_ALIAS_NAME=jessie-staging-armhf-sbuild
SCHROOT_CHROOT_NAME=jessie-staging-armhf-sbuild
SCHROOT_COMMAND=env
SCHROOT_GID=111
SCHROOT_GROUP=buildd
SCHROOT_SESSION_ID=jessie-staging-armhf-sbuild-8b6452de-b63a-45a4-81c9-d63e57f37e67
SCHROOT_UID=106
SCHROOT_USER=buildd
SHELL=/bin/sh
SHLVL=1
SSH_CLIENT=192.168.1.2 45410 22
SSH_CONNECTION=192.168.1.2 45410 192.168.1.45 22
SSH_TTY=/dev/pts/0
TERM=xterm
USER=root
XDG_SESSION_COOKIE=106ef489ba27ee071ab233f6518d3bce-1380046912.711892-759150774
_=/etc/init.d/buildd
dpkg-buildpackage
─────────────────
dpkg-buildpackage: source package pcsc-lite
dpkg-buildpackage: source version 1.8.10-1
dpkg-source --before-build pcsc-lite-1.8.10
dpkg-buildpackage: host architecture armhf
fakeroot debian/rules clean
dh clean --with=systemd
dh_testdir
dh_auto_clean
dh_clean
debian/rules build-arch
dh build-arch --with=systemd
dh_testdir -a
debian/rules override_dh_auto_configure
make[1]: Entering directory `/«PKGBUILDDIR»'
dh_auto_configure -- --with-systemdsystemunitdir=/lib/systemd/system --enable-usbdropdir=/usr/lib/pcsc/drivers CFLAGS="-g -O2" CPPFLAGS="" CXXFLAGS="-g -O2" FFLAGS="-g -O2" LDFLAGS=""
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
/«PKGBUILDDIR»/missing: Unknown `--is-lightweight' option
Try `/«PKGBUILDDIR»/missing --help' for more information
configure: WARNING: 'missing' script is too old or missing
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking build system type... arm-unknown-linux-gnueabihf
checking host system type... arm-unknown-linux-gnueabihf
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... none
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking whether byte ordering is bigendian... no
checking whether to enable maintainer-specific portions of Makefiles... no
checking how to run the C preprocessor... gcc -E
checking whether ln -s works... yes
checking whether make sets $(MAKE)... (cached) yes
checking for flex... flex
checking lex output file root... lex.yy
checking lex library... -lfl
checking whether yytext is a pointer... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking whether gcc and cc understand -c and -o together... yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking for the pthreads library -lpthreads... no
checking whether pthreads work without any flags... no
checking whether pthreads work with -Kthread... no
checking whether pthreads work with -kthread... no
checking for the pthreads library -llthread... no
checking whether pthreads work with -pthread... yes
checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE
checking if more special flags are required for pthreads... no
checking for PTHREAD_PRIO_INHERIT... yes
checking for pthread_cancel... yes
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking the maximum length of command line arguments... 805306365
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert arm-unknown-linux-gnueabihf file names to arm-unknown-linux-gnueabihf format... func_convert_file_noop
checking how to convert arm-unknown-linux-gnueabihf file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... mt
checking if mt is a manifest tool... no
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking getopt.h usability... yes
checking getopt.h presence... yes
checking for getopt.h... yes
checking sys/filio.h usability... no
checking sys/filio.h presence... no
checking for sys/filio.h... no
checking syslog.h usability... yes
checking syslog.h presence... yes
checking for syslog.h... yes
checking dl.h usability... no
checking dl.h presence... no
checking for dl.h... no
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking for an ANSI C-conforming const... yes
checking for uid_t in sys/types.h... yes
checking for size_t... yes
checking whether time.h and sys/time.h may both be included... yes
checking for error_at_line... yes
checking whether lstat correctly handles trailing slash... yes
checking whether stat accepts an empty string... no
checking for vprintf... yes
checking for _doprnt... no
checking for daemon... yes
checking for flock... yes
checking for getopt_long... yes
checking for nanosleep... yes
checking for strerror... yes
checking for vsnprintf... yes
checking for strlcpy... no
checking for strlcat... no
checking for inline... inline
checking for -fvisibility=hidden... yes
checking for library containing dlopen... -ldl
checking for socket in -lsocket... no
checking for mq_getattr in -lrt... yes
checking for LIBUDEV... yes
checking libudev.h usability... yes
checking libudev.h presence... yes
checking for libudev.h... yes
checking for udev_monitor_unref... yes
PC/SC lite has been configured with following options:
Version: 1.8.10
System binaries: /usr/sbin
Configuration dir: /etc/reader.conf.d
Host: arm-unknown-linux-gnueabihf
Compiler: gcc
Preprocessor flags: -I${top_srcdir}/src
Compiler flags: -Wall -fno-common -g -O2
Preprocessor flags: -I${top_srcdir}/src
Linker flags:
Libraries: -ldl -lrt
PTHREAD_CFLAGS: -pthread
PTHREAD_LIBS:
PCSC_ARCH: Linux
pcscd binary /usr/sbin/pcscd
libudev support: yes
libusb support: no
USB drop directory: /usr/lib/pcsc/drivers
ATR parsing messages: false
ipcdir: /var/run/pcscd
use serial: yes
use usb: yes
systemd unit directory: /lib/systemd/system
serial config dir.: /etc/reader.conf.d
PCSCLITE_FEATURES: Linux arm-unknown-linux-gnueabihf serial usb libudev usbdropdir=/usr/lib/pcsc/drivers ipcdir=/var/run/pcscd configdir=/etc/reader.conf.d
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating doc/Makefile
config.status: creating doc/doxygen.conf
config.status: creating doc/pcscd.8
config.status: creating doc/reader.conf.5
config.status: creating doc/example/Makefile
config.status: creating etc/Makefile
config.status: creating etc/pcscd.service
config.status: creating etc/pcscd.socket
config.status: creating src/Makefile
config.status: creating src/libpcsclite.pc
config.status: creating src/pcscd.h
config.status: creating src/PCSC/pcsclite.h
config.status: creating src/spy/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
make[1]: Leaving directory `/«PKGBUILDDIR»'
dh_auto_build -a
make[1]: Entering directory `/«PKGBUILDDIR»'
make all-recursive
make[2]: Entering directory `/«PKGBUILDDIR»'
Making all in src
make[3]: Entering directory `/«PKGBUILDDIR»/src'
Making all in spy
make[4]: Entering directory `/«PKGBUILDDIR»/src/spy'
CC libpcscspy.lo
CCLD libpcscspy.la
pod2man \
--center="PC/SC lite" \
--release="pcsc-lite 1.8.10" \
./pcsc-spy.pod > pcsc-spy.1
make[4]: Leaving directory `/«PKGBUILDDIR»/src/spy'
make[4]: Entering directory `/«PKGBUILDDIR»/src'
CC libpcsclite_la-debug.lo
CC libpcsclite_la-error.lo
CC libpcsclite_la-winscard_clnt.lo
CC libpcsclite_la-simclist.lo
CC libpcsclite_la-strlcat.lo
CC libpcsclite_la-strlcpy.lo
CC libpcsclite_la-sys_unix.lo
CC libpcsclite_la-utils.lo
CC libpcsclite_la-winscard_msg.lo
CCLD libpcsclite.la
CC testpcsc.o
CCLD testpcsc
CC pcsc-wirecheck-gen.o
CCLD pcsc-wirecheck-gen
touch pcsc-wirecheck-dist.c
CC pcsc-wirecheck-dist.o
CC pcsc-wirecheck-main.o
CCLD pcsc-wirecheck
CC pcscd-atrhandler.o
CC pcscd-configfile.o
CC pcscd-debuglog.o
CC pcscd-dyn_hpux.o
CC pcscd-dyn_macosx.o
CC pcscd-dyn_unix.o
CC pcscd-eventhandler.o
CC pcscd-hotplug_generic.o
CC pcscd-ifdwrapper.o
CC pcscd-pcscdaemon.o
CC pcscd-powermgt_generic.o
CC pcscd-prothandler.o
CC pcscd-readerfactory.o
CC pcscd-sd-daemon.o
CC pcscd-simclist.o
CC pcscd-strlcat.o
CC pcscd-strlcpy.o
CC pcscd-sys_unix.o
CC pcscd-tokenparser.o
CC pcscd-hotplug_libudev.o
CC pcscd-hotplug_libusb.o
CC pcscd-hotplug_linux.o
CC pcscd-hotplug_macosx.o
CC pcscd-utils.o
CC pcscd-winscard.o
CC pcscd-winscard_msg.o
CC pcscd-winscard_msg_srv.o
CC pcscd-winscard_svc.o
CCLD pcscd
make[4]: Leaving directory `/«PKGBUILDDIR»/src'
make[3]: Leaving directory `/«PKGBUILDDIR»/src'
Making all in etc
make[3]: Entering directory `/«PKGBUILDDIR»/etc'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/«PKGBUILDDIR»/etc'
Making all in doc
make[3]: Entering directory `/«PKGBUILDDIR»/doc'
Making all in .
make[4]: Entering directory `/«PKGBUILDDIR»/doc'
make[4]: Nothing to be done for `all-am'.
make[4]: Leaving directory `/«PKGBUILDDIR»/doc'
Making all in example
make[4]: Entering directory `/«PKGBUILDDIR»/doc/example'
CC pcsc_demo-pcsc_demo.o
CCLD pcsc_demo
make[4]: Leaving directory `/«PKGBUILDDIR»/doc/example'
make[3]: Leaving directory `/«PKGBUILDDIR»/doc'
make[3]: Entering directory `/«PKGBUILDDIR»'
make[3]: Leaving directory `/«PKGBUILDDIR»'
make[2]: Leaving directory `/«PKGBUILDDIR»'
make[1]: Leaving directory `/«PKGBUILDDIR»'
dh_auto_test -a
make[1]: Entering directory `/«PKGBUILDDIR»'
Making check in src
make[2]: Entering directory `/«PKGBUILDDIR»/src'
Making check in spy
make[3]: Entering directory `/«PKGBUILDDIR»/src/spy'
make[3]: Nothing to be done for `check'.
make[3]: Leaving directory `/«PKGBUILDDIR»/src/spy'
make[3]: Entering directory `/«PKGBUILDDIR»/src'
make[3]: Nothing to be done for `check-am'.
make[3]: Leaving directory `/«PKGBUILDDIR»/src'
make[2]: Leaving directory `/«PKGBUILDDIR»/src'
Making check in etc
make[2]: Entering directory `/«PKGBUILDDIR»/etc'
make[2]: Nothing to be done for `check'.
make[2]: Leaving directory `/«PKGBUILDDIR»/etc'
Making check in doc
make[2]: Entering directory `/«PKGBUILDDIR»/doc'
Making check in .
make[3]: Entering directory `/«PKGBUILDDIR»/doc'
make[3]: Nothing to be done for `check-am'.
make[3]: Leaving directory `/«PKGBUILDDIR»/doc'
Making check in example
make[3]: Entering directory `/«PKGBUILDDIR»/doc/example'
make[3]: Nothing to be done for `check'.
make[3]: Leaving directory `/«PKGBUILDDIR»/doc/example'
make[2]: Leaving directory `/«PKGBUILDDIR»/doc'
make[2]: Entering directory `/«PKGBUILDDIR»'
make[2]: Leaving directory `/«PKGBUILDDIR»'
make[1]: Leaving directory `/«PKGBUILDDIR»'
fakeroot debian/rules binary-arch
dh binary-arch --with=systemd
dh_testroot -a
dh_prep -a
dh_auto_install -a
make[1]: Entering directory `/«PKGBUILDDIR»'
Making install in src
make[2]: Entering directory `/«PKGBUILDDIR»/src'
Making install in spy
make[3]: Entering directory `/«PKGBUILDDIR»/src/spy'
make[4]: Entering directory `/«PKGBUILDDIR»/src/spy'
/bin/mkdir -p '/«PKGBUILDDIR»/debian/tmp/usr/bin'
/usr/bin/install -c pcsc-spy '/«PKGBUILDDIR»/debian/tmp/usr/bin'
/bin/mkdir -p '/«PKGBUILDDIR»/debian/tmp/usr/lib/arm-linux-gnueabihf'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libpcscspy.la '/«PKGBUILDDIR»/debian/tmp/usr/lib/arm-linux-gnueabihf'
libtool: install: /usr/bin/install -c .libs/libpcscspy.so.0.0.0 /«PKGBUILDDIR»/debian/tmp/usr/lib/arm-linux-gnueabihf/libpcscspy.so.0.0.0
libtool: install: (cd /«PKGBUILDDIR»/debian/tmp/usr/lib/arm-linux-gnueabihf && { ln -s -f libpcscspy.so.0.0.0 libpcscspy.so.0 || { rm -f libpcscspy.so.0 && ln -s libpcscspy.so.0.0.0 libpcscspy.so.0; }; })
libtool: install: (cd /«PKGBUILDDIR»/debian/tmp/usr/lib/arm-linux-gnueabihf && { ln -s -f libpcscspy.so.0.0.0 libpcscspy.so || { rm -f libpcscspy.so && ln -s libpcscspy.so.0.0.0 libpcscspy.so; }; })
libtool: install: /usr/bin/install -c .libs/libpcscspy.lai /«PKGBUILDDIR»/debian/tmp/usr/lib/arm-linux-gnueabihf/libpcscspy.la
libtool: install: warning: remember to run `libtool --finish /usr/lib/arm-linux-gnueabihf'
/bin/mkdir -p '/«PKGBUILDDIR»/debian/tmp/usr/share/man/man1'
/usr/bin/install -c -m 644 pcsc-spy.1 '/«PKGBUILDDIR»/debian/tmp/usr/share/man/man1'
make[4]: Leaving directory `/«PKGBUILDDIR»/src/spy'
make[3]: Leaving directory `/«PKGBUILDDIR»/src/spy'
make[3]: Entering directory `/«PKGBUILDDIR»/src'
make[4]: Entering directory `/«PKGBUILDDIR»/src'
/bin/mkdir -p '/«PKGBUILDDIR»/debian/tmp/usr/lib/arm-linux-gnueabihf'
/bin/bash ../libtool --mode=install /usr/bin/install -c libpcsclite.la '/«PKGBUILDDIR»/debian/tmp/usr/lib/arm-linux-gnueabihf'
libtool: install: /usr/bin/install -c .libs/libpcsclite.so.1.0.0 /«PKGBUILDDIR»/debian/tmp/usr/lib/arm-linux-gnueabihf/libpcsclite.so.1.0.0
libtool: install: (cd /«PKGBUILDDIR»/debian/tmp/usr/lib/arm-linux-gnueabihf && { ln -s -f libpcsclite.so.1.0.0 libpcsclite.so.1 || { rm -f libpcsclite.so.1 && ln -s libpcsclite.so.1.0.0 libpcsclite.so.1; }; })
libtool: install: (cd /«PKGBUILDDIR»/debian/tmp/usr/lib/arm-linux-gnueabihf && { ln -s -f libpcsclite.so.1.0.0 libpcsclite.so || { rm -f libpcsclite.so && ln -s libpcsclite.so.1.0.0 libpcsclite.so; }; })
libtool: install: /usr/bin/install -c .libs/libpcsclite.lai /«PKGBUILDDIR»/debian/tmp/usr/lib/arm-linux-gnueabihf/libpcsclite.la
libtool: install: warning: remember to run `libtool --finish /usr/lib/arm-linux-gnueabihf'
/bin/mkdir -p '/«PKGBUILDDIR»/debian/tmp/usr/sbin'
/bin/bash ../libtool --mode=install /usr/bin/install -c pcscd '/«PKGBUILDDIR»/debian/tmp/usr/sbin'
libtool: install: /usr/bin/install -c pcscd /«PKGBUILDDIR»/debian/tmp/usr/sbin/pcscd
/bin/mkdir -p '/«PKGBUILDDIR»/debian/tmp/usr/include'
/bin/mkdir -p '/«PKGBUILDDIR»/debian/tmp/usr/include/PCSC'
/usr/bin/install -c -m 644 PCSC/debuglog.h PCSC/ifdhandler.h PCSC/reader.h PCSC/winscard.h PCSC/wintypes.h '/«PKGBUILDDIR»/debian/tmp/usr/include/PCSC'
/bin/mkdir -p '/«PKGBUILDDIR»/debian/tmp/usr/include/PCSC'
/usr/bin/install -c -m 644 PCSC/pcsclite.h '/«PKGBUILDDIR»/debian/tmp/usr/include/PCSC'
/bin/mkdir -p '/«PKGBUILDDIR»/debian/tmp/usr/lib/arm-linux-gnueabihf/pkgconfig'
/usr/bin/install -c -m 644 libpcsclite.pc '/«PKGBUILDDIR»/debian/tmp/usr/lib/arm-linux-gnueabihf/pkgconfig'
make[4]: Leaving directory `/«PKGBUILDDIR»/src'
make[3]: Leaving directory `/«PKGBUILDDIR»/src'
make[2]: Leaving directory `/«PKGBUILDDIR»/src'
Making install in etc
make[2]: Entering directory `/«PKGBUILDDIR»/etc'
make[3]: Entering directory `/«PKGBUILDDIR»/etc'
make[3]: Nothing to be done for `install-exec-am'.
/bin/mkdir -p '/«PKGBUILDDIR»/debian/tmp/lib/systemd/system'
/usr/bin/install -c -m 644 pcscd.service pcscd.socket '/«PKGBUILDDIR»/debian/tmp/lib/systemd/system'
make[3]: Leaving directory `/«PKGBUILDDIR»/etc'
make[2]: Leaving directory `/«PKGBUILDDIR»/etc'
Making install in doc
make[2]: Entering directory `/«PKGBUILDDIR»/doc'
Making install in .
make[3]: Entering directory `/«PKGBUILDDIR»/doc'
make[4]: Entering directory `/«PKGBUILDDIR»/doc'
make[4]: Nothing to be done for `install-exec-am'.
/bin/mkdir -p '/«PKGBUILDDIR»/debian/tmp/usr/share/doc/pcsc-lite'
/usr/bin/install -c -m 644 README.DAEMON '/«PKGBUILDDIR»/debian/tmp/usr/share/doc/pcsc-lite'
/bin/mkdir -p '/«PKGBUILDDIR»/debian/tmp/usr/share/man/man5'
/usr/bin/install -c -m 644 reader.conf.5 '/«PKGBUILDDIR»/debian/tmp/usr/share/man/man5'
/bin/mkdir -p '/«PKGBUILDDIR»/debian/tmp/usr/share/man/man8'
/usr/bin/install -c -m 644 pcscd.8 '/«PKGBUILDDIR»/debian/tmp/usr/share/man/man8'
make[4]: Leaving directory `/«PKGBUILDDIR»/doc'
make[3]: Leaving directory `/«PKGBUILDDIR»/doc'
Making install in example
make[3]: Entering directory `/«PKGBUILDDIR»/doc/example'
make[4]: Entering directory `/«PKGBUILDDIR»/doc/example'
make[4]: Nothing to be done for `install-exec-am'.
make[4]: Nothing to be done for `install-data-am'.
make[4]: Leaving directory `/«PKGBUILDDIR»/doc/example'
make[3]: Leaving directory `/«PKGBUILDDIR»/doc/example'
make[2]: Leaving directory `/«PKGBUILDDIR»/doc'
make[2]: Entering directory `/«PKGBUILDDIR»'
make[3]: Entering directory `/«PKGBUILDDIR»'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/«PKGBUILDDIR»'
make[2]: Leaving directory `/«PKGBUILDDIR»'
make[1]: Leaving directory `/«PKGBUILDDIR»'
dh_install -a
dh_installdocs -a
dh_installchangelogs -a
dh_installexamples -a
dh_installman -a
dh_systemd_enable -a
dh_installinit -a
dh_systemd_start -a
dh_perl -a
dh_link -a
dh_compress -a
dh_fixperms -a
debian/rules override_dh_strip
make[1]: Entering directory `/«PKGBUILDDIR»'
dh_strip --dbg-package=libpcsclite1-dbg
make[1]: Leaving directory `/«PKGBUILDDIR»'
dh_makeshlibs -a
dh_shlibdeps -a
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/libpcsclite-dev/usr/lib/arm-linux-gnueabihf/libpcscspy.so.0.0.0 was not linked against librt.so.1 (it uses none of the library's symbols)
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/libpcsclite1/usr/lib/arm-linux-gnueabihf/libpcsclite.so.1.0.0 was not linked against librt.so.1 (it uses none of the library's symbols)
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/libpcsclite1/usr/lib/arm-linux-gnueabihf/libpcsclite.so.1.0.0 was not linked against libdl.so.2 (it uses none of the library's symbols)
dh_installdeb -a
dh_gencontrol -a
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
dpkg-gencontrol: warning: Depends field of package libpcsclite1-dbg: unknown substitution variable ${shlibs:Depends}
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
dh_md5sums -a
dh_builddeb -a
dpkg-deb: building package `libpcsclite-dev' in `../libpcsclite-dev_1.8.10-1_armhf.deb'.
dpkg-deb: building package `pcscd' in `../pcscd_1.8.10-1_armhf.deb'.
dpkg-deb: building package `libpcsclite1' in `../libpcsclite1_1.8.10-1_armhf.deb'.
dpkg-deb: building package `libpcsclite1-dbg' in `../libpcsclite1-dbg_1.8.10-1_armhf.deb'.
dpkg-genchanges -B -mRaspbian nitrogen6x test autobuilder <root@raspbian.org> >../pcsc-lite_1.8.10-1_armhf.changes
dpkg-genchanges: arch-specific upload - not including arch-independent packages
dpkg-genchanges: binary-only upload - not including any source code
dpkg-source --after-build pcsc-lite-1.8.10
dpkg-buildpackage: binary only upload (no source included)
────────────────────────────────────────────────────────────────────────────────
Build finished at 20131030-0537
Finished
────────
I: Built successfully
┌──────────────────────────────────────────────────────────────────────────────┐
│ Changes │
└──────────────────────────────────────────────────────────────────────────────┘
pcsc-lite_1.8.10-1_armhf.changes:
─────────────────────────────────
Format: 1.8
Date: Sat, 19 Oct 2013 18:44:32 +0200
Source: pcsc-lite
Binary: pcscd libpcsclite-dev libpcsclite1-dbg libpcsclite1
Architecture: armhf
Version: 1.8.10-1
Distribution: jessie-staging
Urgency: low
Maintainer: Raspbian nitrogen6x test autobuilder <root@raspbian.org>
Changed-By: Ludovic Rousseau <rousseau@debian.org>
Description:
libpcsclite-dev - Middleware to access a smart card using PC/SC (development files)
libpcsclite1 - Middleware to access a smart card using PC/SC (library)
libpcsclite1-dbg - Middleware to access a smart card using PC/SC (debugging symbols)
pcscd - Middleware to access a smart card using PC/SC (daemon side)
Changes:
pcsc-lite (1.8.10-1) unstable; urgency=low
.
* New upstream release
* debian/libpcsclite1.symbols: remove the log_msg symbol. The bug is fixed
upstream.
* debian/control: fix lintian vcs-field-not-canonical for Vcs-Svn
Checksums-Sha1:
25a08d2809dd991411701a2d8690b01e7343f5f4 92694 pcscd_1.8.10-1_armhf.deb
8f401130815685811b35352c7da0c350c21eebe5 76478 libpcsclite-dev_1.8.10-1_armhf.deb
c68f0356210972b645808877479904261cbeaee0 196480 libpcsclite1-dbg_1.8.10-1_armhf.deb
0345e8e337bc1a93da5db34117d6265658db5d34 55360 libpcsclite1_1.8.10-1_armhf.deb
Checksums-Sha256:
a65898ebbbd4db0dc85844fb77da4143d3431d34a2d717bc219ad0e5e1777784 92694 pcscd_1.8.10-1_armhf.deb
247b420de1906bc5c6fa83282be5b7919e40b6f8b5d616743a67fdf320baa187 76478 libpcsclite-dev_1.8.10-1_armhf.deb
f650c84d2eafdcccc1bc1ee7bfbc3a786d3cc54f5683a7bc16f65f06d4c34b43 196480 libpcsclite1-dbg_1.8.10-1_armhf.deb
f1aad963326cc23b024b9fca5b1add53c7e3291cd7f59d75428f001de83cc258 55360 libpcsclite1_1.8.10-1_armhf.deb
Files:
db63757ca31e0dd3a469b360527c582c 92694 misc optional pcscd_1.8.10-1_armhf.deb
4801e75d775cbdf84e955db250ac2087 76478 libdevel optional libpcsclite-dev_1.8.10-1_armhf.deb
526496d8d504ef4ca8e052277c0f480e 196480 debug extra libpcsclite1-dbg_1.8.10-1_armhf.deb
f95c733f298e59dbeae26f906761de0b 55360 libs optional libpcsclite1_1.8.10-1_armhf.deb
┌──────────────────────────────────────────────────────────────────────────────┐
│ Package contents │
└──────────────────────────────────────────────────────────────────────────────┘
pcscd_1.8.10-1_armhf.deb
────────────────────────
new debian package, version 2.0.
size 92694 bytes: control archive=2032 bytes.
18 bytes, 1 lines conffiles
761 bytes, 18 lines control
710 bytes, 11 lines md5sums
1955 bytes, 58 lines * postinst #!/bin/sh
1263 bytes, 54 lines * postrm #!/bin/sh
165 bytes, 7 lines * prerm #!/bin/sh
Package: pcscd
Source: pcsc-lite
Version: 1.8.10-1
Architecture: armhf
Maintainer: Ludovic Rousseau <rousseau@debian.org>
Installed-Size: 144
Depends: libccid (>= 1.4.1~) | pcsc-ifd-handler, libc6 (>= 2.4), libudev1 (>= 183), init-system-helpers (>= 1.11), lsb-base (>= 3.0-6), libpcsclite1 (= 1.8.10-1)
Suggests: systemd
Section: misc
Priority: optional
Homepage: http://pcsclite.alioth.debian.org/
Description: Middleware to access a smart card using PC/SC (daemon side)
The purpose of PC/SC Lite is to provide a Windows(R) SCard interface
in a very small form factor for communicating to smart cards and
smart cards readers.
.
The PC/SC daemon is used to dynamically allocate/deallocate reader
drivers at runtime and manage connections to the readers.
drwxr-xr-x root/root 0 2013-10-30 05:37 ./
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/
drwxr-xr-x root/root 0 2013-10-30 05:37 ./usr/sbin/
-rwxr-xr-x root/root 93292 2013-10-30 05:37 ./usr/sbin/pcscd
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/share/
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/share/doc/
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/share/doc/pcscd/
-rw-r--r-- root/root 586 2008-05-09 14:59 ./usr/share/doc/pcscd/SECURITY
-rw-r--r-- root/root 1087 2008-05-09 14:59 ./usr/share/doc/pcscd/DRIVERS
-rw-r--r-- root/root 4834 2011-11-25 14:50 ./usr/share/doc/pcscd/copyright
-rw-r--r-- root/root 2191 2008-05-09 14:59 ./usr/share/doc/pcscd/README.gz
-rw-r--r-- root/root 10333 2013-10-19 16:51 ./usr/share/doc/pcscd/changelog.Debian.gz
-rw-r--r-- root/root 24347 2013-10-19 16:36 ./usr/share/doc/pcscd/changelog.gz
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/share/man/
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/share/man/man8/
-rw-r--r-- root/root 1410 2013-10-30 05:36 ./usr/share/man/man8/pcscd.8.gz
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/share/man/man5/
-rw-r--r-- root/root 1194 2013-10-30 05:36 ./usr/share/man/man5/reader.conf.5.gz
drwxr-xr-x root/root 0 2013-10-30 05:36 ./lib/
drwxr-xr-x root/root 0 2013-10-30 05:36 ./lib/systemd/
drwxr-xr-x root/root 0 2013-10-30 05:36 ./lib/systemd/system/
-rw-r--r-- root/root 145 2013-10-30 05:36 ./lib/systemd/system/pcscd.socket
-rw-r--r-- root/root 193 2013-10-30 05:36 ./lib/systemd/system/pcscd.service
drwxr-xr-x root/root 0 2013-10-30 05:36 ./etc/
drwxr-xr-x root/root 0 2013-10-30 05:36 ./etc/init.d/
-rwxr-xr-x root/root 3720 2013-01-16 15:33 ./etc/init.d/pcscd
libpcsclite-dev_1.8.10-1_armhf.deb
──────────────────────────────────
new debian package, version 2.0.
size 76478 bytes: control archive=1347 bytes.
869 bytes, 23 lines control
982 bytes, 14 lines md5sums
135 bytes, 7 lines * postinst #!/bin/sh
132 bytes, 7 lines * postrm #!/bin/sh
29 bytes, 1 lines shlibs
Package: libpcsclite-dev
Source: pcsc-lite
Version: 1.8.10-1
Architecture: armhf
Maintainer: Ludovic Rousseau <rousseau@debian.org>
Installed-Size: 153
Pre-Depends: multiarch-support
Depends: libpcsclite1 (= 1.8.10-1), libc6 (>= 2.4)
Recommends: python
Section: libdevel
Priority: optional
Homepage: http://pcsclite.alioth.debian.org/
Description: Middleware to access a smart card using PC/SC (development files)
The purpose of PC/SC Lite is to provide a Windows(R) SCard interface
in a very small form factor for communicating to smart cards and
smart cards readers.
.
This package contains the files needed for compiling and linking
an application that communicates to any reader available to the
PC/SC daemon.
.
This package also contains the PC/SC spying library: libpcscspy.so
See http://ludovicrousseau.blogspot.com/2011/11/pcsc-api-spy-third-try.html
drwxr-xr-x root/root 0 2013-10-30 05:37 ./
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/include/
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/include/PCSC/
-rw-r--r-- root/root 3680 2013-10-30 05:36 ./usr/include/PCSC/debuglog.h
-rw-r--r-- root/root 28647 2013-10-30 05:36 ./usr/include/PCSC/ifdhandler.h
-rw-r--r-- root/root 12514 2013-10-30 05:36 ./usr/include/PCSC/pcsclite.h
-rw-r--r-- root/root 14079 2013-10-30 05:36 ./usr/include/PCSC/reader.h
-rw-r--r-- root/root 2866 2013-10-30 05:36 ./usr/include/PCSC/winscard.h
-rw-r--r-- root/root 1829 2013-10-30 05:36 ./usr/include/PCSC/wintypes.h
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/lib/
drwxr-xr-x root/root 0 2013-10-30 05:37 ./usr/lib/arm-linux-gnueabihf/
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/lib/arm-linux-gnueabihf/pkgconfig/
-rw-r--r-- root/root 325 2013-10-30 05:36 ./usr/lib/arm-linux-gnueabihf/pkgconfig/libpcsclite.pc
-rw-r--r-- root/root 12604 2013-10-30 05:37 ./usr/lib/arm-linux-gnueabihf/libpcscspy.so.0.0.0
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/bin/
-rwxr-xr-x root/root 33661 2013-10-30 05:36 ./usr/bin/pcsc-spy
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/share/
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/share/doc/
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/share/doc/libpcsclite-dev/
-rw-r--r-- root/root 4834 2011-11-25 14:50 ./usr/share/doc/libpcsclite-dev/copyright
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/share/doc/libpcsclite-dev/examples/
-rw-r--r-- root/root 2455 2011-10-05 21:08 ./usr/share/doc/libpcsclite-dev/examples/pcsc_demo.c.gz
-rw-r--r-- root/root 10333 2013-10-19 16:51 ./usr/share/doc/libpcsclite-dev/changelog.Debian.gz
-rw-r--r-- root/root 24347 2013-10-19 16:36 ./usr/share/doc/libpcsclite-dev/changelog.gz
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/share/man/
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/share/man/man1/
-rw-r--r-- root/root 3165 2013-10-30 05:36 ./usr/share/man/man1/pcsc-spy.1.gz
lrwxrwxrwx root/root 0 2013-10-30 05:36 ./usr/lib/arm-linux-gnueabihf/libpcscspy.so.0 -> libpcscspy.so.0.0.0
lrwxrwxrwx root/root 0 2013-10-30 05:36 ./usr/lib/arm-linux-gnueabihf/libpcscspy.so -> libpcscspy.so.0.0.0
lrwxrwxrwx root/root 0 2013-10-30 05:36 ./usr/lib/arm-linux-gnueabihf/libpcsclite.so -> libpcsclite.so.1.0.0
libpcsclite1-dbg_1.8.10-1_armhf.deb
───────────────────────────────────
new debian package, version 2.0.
size 196480 bytes: control archive=865 bytes.
689 bytes, 20 lines control
556 bytes, 6 lines md5sums
Package: libpcsclite1-dbg
Source: pcsc-lite
Version: 1.8.10-1
Architecture: armhf
Maintainer: Ludovic Rousseau <rousseau@debian.org>
Installed-Size: 227
Depends: libpcsclite1 (= 1.8.10-1)
Conflicts: libpcsclite-dbg
Replaces: libpcsclite-dbg
Section: debug
Priority: extra
Multi-Arch: same
Homepage: http://pcsclite.alioth.debian.org/
Description: Middleware to access a smart card using PC/SC (debugging symbols)
The purpose of PC/SC Lite is to provide a Windows(R) SCard interface
in a very small form factor for communicating to smart cards and
smart cards readers.
.
This package contains the detached debugging symbols to be used for
debugging the applications using PC/SC Lite.
drwxr-xr-x root/root 0 2013-10-30 05:37 ./
drwxr-xr-x root/root 0 2013-10-30 05:37 ./usr/
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/share/
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/share/doc/
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/share/doc/libpcsclite1-dbg/
-rw-r--r-- root/root 4834 2011-11-25 14:50 ./usr/share/doc/libpcsclite1-dbg/copyright
-rw-r--r-- root/root 10333 2013-10-19 16:51 ./usr/share/doc/libpcsclite1-dbg/changelog.Debian.gz
-rw-r--r-- root/root 24347 2013-10-19 16:36 ./usr/share/doc/libpcsclite1-dbg/changelog.gz
drwxr-xr-x root/root 0 2013-10-30 05:37 ./usr/lib/
drwxr-xr-x root/root 0 2013-10-30 05:37 ./usr/lib/debug/
drwxr-xr-x root/root 0 2013-10-30 05:37 ./usr/lib/debug/.build-id/
drwxr-xr-x root/root 0 2013-10-30 05:37 ./usr/lib/debug/.build-id/11/
-rw-r--r-- root/root 126979 2013-10-30 05:37 ./usr/lib/debug/.build-id/11/5d2f9eb3a6cbc9e0593a3c7971c7a177621b37.debug
drwxr-xr-x root/root 0 2013-10-30 05:37 ./usr/lib/debug/.build-id/90/
-rw-r--r-- root/root 18357 2013-10-30 05:37 ./usr/lib/debug/.build-id/90/5fb97b82834a9d33cffec7200d9c2c49277cad.debug
drwxr-xr-x root/root 0 2013-10-30 05:37 ./usr/lib/debug/.build-id/49/
-rw-r--r-- root/root 46769 2013-10-30 05:37 ./usr/lib/debug/.build-id/49/f9e4f249f4b4552d3c5ffeff66177e70bbad48.debug
libpcsclite1_1.8.10-1_armhf.deb
───────────────────────────────
new debian package, version 2.0.
size 55360 bytes: control archive=1174 bytes.
735 bytes, 21 lines control
309 bytes, 4 lines md5sums
135 bytes, 7 lines * postinst #!/bin/sh
132 bytes, 7 lines * postrm #!/bin/sh
27 bytes, 1 lines shlibs
675 bytes, 23 lines symbols
Package: libpcsclite1
Source: pcsc-lite
Version: 1.8.10-1
Architecture: armhf
Maintainer: Ludovic Rousseau <rousseau@debian.org>
Installed-Size: 74
Pre-Depends: multiarch-support
Depends: libc6 (>= 2.4)
Suggests: pcscd (= 1.8.10-1)
Breaks: libpcsclite-dev (<< 1.8.10-1), pcscd (<< 1.8.10-1)
Section: libs
Priority: optional
Multi-Arch: same
Homepage: http://pcsclite.alioth.debian.org/
Description: Middleware to access a smart card using PC/SC (library)
The purpose of PC/SC Lite is to provide a Windows(R) SCard interface
in a very small form factor for communicating to smartcards and
readers.
.
The PC/SC Lite library is used to connect to the PC/SC daemon from
a client application and provide access to the desired reader.
drwxr-xr-x root/root 0 2013-10-30 05:37 ./
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/lib/
drwxr-xr-x root/root 0 2013-10-30 05:37 ./usr/lib/arm-linux-gnueabihf/
-rw-r--r-- root/root 34656 2013-10-30 05:37 ./usr/lib/arm-linux-gnueabihf/libpcsclite.so.1.0.0
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/share/
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/share/doc/
drwxr-xr-x root/root 0 2013-10-30 05:36 ./usr/share/doc/libpcsclite1/
-rw-r--r-- root/root 4834 2011-11-25 14:50 ./usr/share/doc/libpcsclite1/copyright
-rw-r--r-- root/root 10333 2013-10-19 16:51 ./usr/share/doc/libpcsclite1/changelog.Debian.gz
-rw-r--r-- root/root 24347 2013-10-19 16:36 ./usr/share/doc/libpcsclite1/changelog.gz
lrwxrwxrwx root/root 0 2013-10-30 05:36 ./usr/lib/arm-linux-gnueabihf/libpcsclite.so.1 -> libpcsclite.so.1.0.0
┌──────────────────────────────────────────────────────────────────────────────┐
│ Post Build │
└──────────────────────────────────────────────────────────────────────────────┘
┌──────────────────────────────────────────────────────────────────────────────┐
│ Cleanup │
└──────────────────────────────────────────────────────────────────────────────┘
Purging /«BUILDDIR»
Not cleaning session: cloned chroot in use
┌──────────────────────────────────────────────────────────────────────────────┐
│ Summary │
└──────────────────────────────────────────────────────────────────────────────┘
Build Architecture: armhf
Build-Space: 7640
Build-Time: 132
Distribution: jessie-staging
Host Architecture: armhf
Install-Time: 132
Job: pcsc-lite_1.8.10-1
Machine Architecture: armhf
Package: pcsc-lite
Package-Time: 332
Source-Version: 1.8.10-1
Space: 7640
Status: successful
Version: 1.8.10-1
────────────────────────────────────────────────────────────────────────────────
Finished at 20131030-0537
Build needed 00:05:32, 7640k disc space