milter-greylist →
4.5.11-1+b1 →
armhf → 2015-05-02 18:12:00
sbuild (Debian sbuild) 0.63.2 (18 Aug 2012) on bm-wb-01
╔══════════════════════════════════════════════════════════════════════════════╗
║ milter-greylist 4.5.11-1+b1 (armhf) 02 May 2015 18:02 ║
╚══════════════════════════════════════════════════════════════════════════════╝
Package: milter-greylist
Version: 4.5.11-1+b1
Source Version: 4.5.11-1
Distribution: stretch-staging
Machine Architecture: armhf
Host Architecture: armhf
Build Architecture: armhf
I: NOTICE: Log filtering will replace 'build/milter-greylist-w77QXM/milter-greylist-4.5.11' with '«PKGBUILDDIR»'
I: NOTICE: Log filtering will replace 'build/milter-greylist-w77QXM' with '«BUILDDIR»'
I: NOTICE: Log filtering will replace 'var/lib/schroot/mount/stretch-staging-armhf-sbuild-4e9733d7-508b-49fa-88c9-18a629b55b4d' with '«CHROOT»'
┌──────────────────────────────────────────────────────────────────────────────┐
│ Update chroot │
└──────────────────────────────────────────────────────────────────────────────┘
Get:1 http://172.17.0.1 stretch-staging InRelease [11.3 kB]
Get:2 http://172.17.0.1 stretch-staging/main Sources [7859 kB]
Get:3 http://172.17.0.1 stretch-staging/main armhf Packages [9633 kB]
Ign http://172.17.0.1 stretch-staging/main Translation-en
Fetched 17.5 MB in 33s (526 kB/s)
Reading package lists...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Fetch source files │
└──────────────────────────────────────────────────────────────────────────────┘
Check APT
─────────
Checking available source versions...
Download source files with APT
──────────────────────────────
Reading package lists...
Building dependency tree...
Need to get 267 kB of source archives.
Get:1 http://172.17.0.1/private/ stretch-staging/main milter-greylist 4.5.11-1 (dsc) [1831 B]
Get:2 http://172.17.0.1/private/ stretch-staging/main milter-greylist 4.5.11-1 (tar) [255 kB]
Get:3 http://172.17.0.1/private/ stretch-staging/main milter-greylist 4.5.11-1 (diff) [10.7 kB]
Fetched 267 kB in 0s (2989 kB/s)
Download complete and in download only mode
Check arch
──────────
Merged Build-Depends: build-essential, fakeroot
Filtered Build-Depends: build-essential, fakeroot
dpkg-deb: building package `sbuild-build-depends-core-dummy' in `/«BUILDDIR»/resolver-4u8plC/apt_archive/sbuild-build-depends-core-dummy.deb'.
OK
Reading package lists...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Install core build dependencies (apt-based resolver) │
└──────────────────────────────────────────────────────────────────────────────┘
Installing build dependencies
Reading package lists...
Building dependency tree...
The following NEW packages will be installed:
sbuild-build-depends-core-dummy
debconf: delaying package configuration, since apt-utils is not installed
0 upgraded, 1 newly installed, 0 to remove and 13 not upgraded.
Need to get 0 B/816 B of archives.
After this operation, 0 B of additional disk space will be used.
Selecting previously unselected package sbuild-build-depends-core-dummy.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 11998 files and directories currently installed.)
Preparing to unpack .../sbuild-build-depends-core-dummy.deb ...
Unpacking sbuild-build-depends-core-dummy (0.invalid.0) ...
Setting up sbuild-build-depends-core-dummy (0.invalid.0) ...
Merged Build-Depends: libc6-dev | libc-dev, gcc (>= 4:4.9.1), g++ (>= 4:4.9.1), make, dpkg-dev (>= 1.17.11), quilt, debhelper (>= 9), autotools-dev, libmilter-dev, bison, flex, libspf2-dev, libcurl4-openssl-dev, libopendkim-dev, libssl-dev, libgeoip-dev
Filtered Build-Depends: libc6-dev, gcc (>= 4:4.9.1), g++ (>= 4:4.9.1), make, dpkg-dev (>= 1.17.11), quilt, debhelper (>= 9), autotools-dev, libmilter-dev, bison, flex, libspf2-dev, libcurl4-openssl-dev, libopendkim-dev, libssl-dev, libgeoip-dev
dpkg-deb: building package `sbuild-build-depends-milter-greylist-dummy' in `/«BUILDDIR»/resolver-j7QAwl/apt_archive/sbuild-build-depends-milter-greylist-dummy.deb'.
OK
Reading package lists...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Install milter-greylist build dependencies (apt-based resolver) │
└──────────────────────────────────────────────────────────────────────────────┘
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
autotools-dev bison bsdmainutils debhelper diffstat file flex geoip-bin
gettext gettext-base groff-base intltool-debian libasprintf0c2 libbison-dev
libbsd0 libcroco3 libcurl3 libcurl4-openssl-dev libffi6 libfl-dev
libgeoip-dev libgeoip1 libglib2.0-0 libgnutls-deb0-28 libgssapi-krb5-2
libhogweed2 libidn11 libk5crypto3 libkeyutils1 libkrb5-3 libkrb5support0
libldap-2.4-2 libmagic1 libmilter-dev libmilter1.0.1 libnettle4
libopendkim-dev libopendkim10 libp11-kit0 libpipeline1 librtmp1 libsasl2-2
libsasl2-modules-db libsigsegv2 libspf2-2 libspf2-dev libssh2-1 libssl-dev
libssl1.0.0 libtasn1-6 libunistring0 libxml2 m4 man-db po-debconf quilt
zlib1g-dev
Suggested packages:
bison-doc wamerican wordlist whois vacation dh-make gettext-doc groff
libcurl4-doc libcurl3-dbg libidn11-dev libkrb5-dev libldap2-dev librtmp-dev
libssh2-1-dev pkg-config gnutls-bin krb5-doc krb5-user sendmail-doc less
www-browser libmail-box-perl procmail graphviz default-mta
mail-transport-agent
Recommended packages:
curl wget lynx-cur autopoint libasprintf-dev libgettextpo-dev
ca-certificates geoip-database libglib2.0-data shared-mime-info
xdg-user-dirs krb5-locales libsasl2-modules libssl-doc xml-core
libmail-sendmail-perl
The following NEW packages will be installed:
autotools-dev bison bsdmainutils debhelper diffstat file flex geoip-bin
gettext gettext-base groff-base intltool-debian libasprintf0c2 libbison-dev
libbsd0 libcroco3 libcurl3 libcurl4-openssl-dev libffi6 libfl-dev
libgeoip-dev libgeoip1 libglib2.0-0 libgnutls-deb0-28 libgssapi-krb5-2
libhogweed2 libidn11 libk5crypto3 libkeyutils1 libkrb5-3 libkrb5support0
libldap-2.4-2 libmagic1 libmilter-dev libmilter1.0.1 libnettle4
libopendkim-dev libopendkim10 libp11-kit0 libpipeline1 librtmp1 libsasl2-2
libsasl2-modules-db libsigsegv2 libspf2-2 libspf2-dev libssh2-1 libssl-dev
libssl1.0.0 libtasn1-6 libunistring0 libxml2 m4 man-db po-debconf quilt
sbuild-build-depends-milter-greylist-dummy zlib1g-dev
0 upgraded, 58 newly installed, 0 to remove and 13 not upgraded.
Need to get 16.9 MB/16.9 MB of archives.
After this operation, 45.7 MB of additional disk space will be used.
Get:1 http://172.17.0.1/private/ stretch-staging/main libpipeline1 armhf 1.4.0-1 [24.0 kB]
Get:2 http://172.17.0.1/private/ stretch-staging/main libssl1.0.0 armhf 1.0.1k-3 [844 kB]
Get:3 http://172.17.0.1/private/ stretch-staging/main groff-base armhf 1.22.3-1 [1085 kB]
Get:4 http://172.17.0.1/private/ stretch-staging/main bsdmainutils armhf 9.0.6 [177 kB]
Get:5 http://172.17.0.1/private/ stretch-staging/main man-db armhf 2.7.0.2-5 [972 kB]
Get:6 http://172.17.0.1/private/ stretch-staging/main libasprintf0c2 armhf 0.19.3-2 [31.1 kB]
Get:7 http://172.17.0.1/private/ stretch-staging/main libnettle4 armhf 2.7.1-5 [178 kB]
Get:8 http://172.17.0.1/private/ stretch-staging/main libhogweed2 armhf 2.7.1-5 [117 kB]
Get:9 http://172.17.0.1/private/ stretch-staging/main libffi6 armhf 3.1-2 [18.1 kB]
Get:10 http://172.17.0.1/private/ stretch-staging/main libp11-kit0 armhf 0.23.1-2 [94.1 kB]
Get:11 http://172.17.0.1/private/ stretch-staging/main libtasn1-6 armhf 4.4-3 [43.8 kB]
Get:12 http://172.17.0.1/private/ stretch-staging/main libgnutls-deb0-28 armhf 3.3.8-7 [624 kB]
Get:13 http://172.17.0.1/private/ stretch-staging/main libkeyutils1 armhf 1.5.9-5 [10.9 kB]
Get:14 http://172.17.0.1/private/ stretch-staging/main libkrb5support0 armhf 1.12.1+dfsg-19 [54.8 kB]
Get:15 http://172.17.0.1/private/ stretch-staging/main libk5crypto3 armhf 1.12.1+dfsg-19 [108 kB]
Get:16 http://172.17.0.1/private/ stretch-staging/main libkrb5-3 armhf 1.12.1+dfsg-19 [256 kB]
Get:17 http://172.17.0.1/private/ stretch-staging/main libgssapi-krb5-2 armhf 1.12.1+dfsg-19 [128 kB]
Get:18 http://172.17.0.1/private/ stretch-staging/main libidn11 armhf 1.30-1 [166 kB]
Get:19 http://172.17.0.1/private/ stretch-staging/main libsasl2-modules-db armhf 2.1.26.dfsg1-13 [65.5 kB]
Get:20 http://172.17.0.1/private/ stretch-staging/main libsasl2-2 armhf 2.1.26.dfsg1-13 [97.2 kB]
Get:21 http://172.17.0.1/private/ stretch-staging/main libldap-2.4-2 armhf 2.4.40+dfsg-1 [192 kB]
Get:22 http://172.17.0.1/private/ stretch-staging/main libmagic1 armhf 1:5.22+15-2 [244 kB]
Get:23 http://172.17.0.1/private/ stretch-staging/main libxml2 armhf 2.9.1+dfsg1-5 [703 kB]
Get:24 http://172.17.0.1/private/ stretch-staging/main libsigsegv2 armhf 2.10-4 [28.2 kB]
Get:25 http://172.17.0.1/private/ stretch-staging/main m4 armhf 1.4.17-4 [238 kB]
Get:26 http://172.17.0.1/private/ stretch-staging/main libfl-dev armhf 2.5.39-8 [74.9 kB]
Get:27 http://172.17.0.1/private/ stretch-staging/main flex armhf 2.5.39-8 [407 kB]
Get:28 http://172.17.0.1/private/ stretch-staging/main libbsd0 armhf 0.7.0-2 [63.7 kB]
Get:29 http://172.17.0.1/private/ stretch-staging/main libglib2.0-0 armhf 2.42.1-1 [2250 kB]
Get:30 http://172.17.0.1/private/ stretch-staging/main libcroco3 armhf 0.6.8-3 [121 kB]
Get:31 http://172.17.0.1/private/ stretch-staging/main librtmp1 armhf 2.4+20150115.gita107cef-1 [54.0 kB]
Get:32 http://172.17.0.1/private/ stretch-staging/main libssh2-1 armhf 1.5.0-2 [122 kB]
Get:33 http://172.17.0.1/private/ stretch-staging/main libcurl3 armhf 7.42.1-1 [238 kB]
Get:34 http://172.17.0.1/private/ stretch-staging/main libgeoip1 armhf 1.6.2-4 [87.7 kB]
Get:35 http://172.17.0.1/private/ stretch-staging/main libunistring0 armhf 0.9.3-5.2 [253 kB]
Get:36 http://172.17.0.1/private/ stretch-staging/main libmilter1.0.1 armhf 8.14.4-8 [235 kB]
Get:37 http://172.17.0.1/private/ stretch-staging/main file armhf 1:5.22+15-2 [59.9 kB]
Get:38 http://172.17.0.1/private/ stretch-staging/main gettext-base armhf 0.19.3-2 [116 kB]
Get:39 http://172.17.0.1/private/ stretch-staging/main autotools-dev all 20140911.1 [70.5 kB]
Get:40 http://172.17.0.1/private/ stretch-staging/main libbison-dev armhf 2:3.0.2.dfsg-2 [425 kB]
Get:41 http://172.17.0.1/private/ stretch-staging/main bison armhf 2:3.0.2.dfsg-2 [854 kB]
Get:42 http://172.17.0.1/private/ stretch-staging/main gettext armhf 0.19.3-2 [1167 kB]
Get:43 http://172.17.0.1/private/ stretch-staging/main intltool-debian all 0.35.0+20060710.1 [29.8 kB]
Get:44 http://172.17.0.1/private/ stretch-staging/main po-debconf all 1.0.16+nmu3 [220 kB]
Get:45 http://172.17.0.1/private/ stretch-staging/main debhelper all 9.20150101 [813 kB]
Get:46 http://172.17.0.1/private/ stretch-staging/main diffstat armhf 1.58-1 [27.2 kB]
Get:47 http://172.17.0.1/private/ stretch-staging/main geoip-bin armhf 1.6.2-4 [55.2 kB]
Get:48 http://172.17.0.1/private/ stretch-staging/main libcurl4-openssl-dev armhf 7.42.1-1 [320 kB]
Get:49 http://172.17.0.1/private/ stretch-staging/main libgeoip-dev armhf 1.6.2-4 [116 kB]
Get:50 http://172.17.0.1/private/ stretch-staging/main libspf2-2 armhf 1.2.10-5 [49.6 kB]
Get:51 http://172.17.0.1/private/ stretch-staging/main libspf2-dev armhf 1.2.10-5 [51.4 kB]
Get:52 http://172.17.0.1/private/ stretch-staging/main zlib1g-dev armhf 1:1.2.8.dfsg-2 [199 kB]
Get:53 http://172.17.0.1/private/ stretch-staging/main libssl-dev armhf 1.0.1k-3 [1084 kB]
Get:54 http://172.17.0.1/private/ stretch-staging/main quilt all 0.63-3 [312 kB]
Get:55 http://172.17.0.1/private/ stretch-staging/main libmilter-dev armhf 8.14.4-8 [292 kB]
Get:56 http://172.17.0.1/private/ stretch-staging/main libopendkim10 armhf 2.10.1-2 [81.7 kB]
Get:57 http://172.17.0.1/private/ stretch-staging/main libopendkim-dev armhf 2.10.1-2 [148 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 16.9 MB in 4s (3614 kB/s)
Selecting previously unselected package libpipeline1:armhf.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 11998 files and directories currently installed.)
Preparing to unpack .../libpipeline1_1.4.0-1_armhf.deb ...
Unpacking libpipeline1:armhf (1.4.0-1) ...
Selecting previously unselected package libssl1.0.0:armhf.
Preparing to unpack .../libssl1.0.0_1.0.1k-3_armhf.deb ...
Unpacking libssl1.0.0:armhf (1.0.1k-3) ...
Selecting previously unselected package groff-base.
Preparing to unpack .../groff-base_1.22.3-1_armhf.deb ...
Unpacking groff-base (1.22.3-1) ...
Selecting previously unselected package bsdmainutils.
Preparing to unpack .../bsdmainutils_9.0.6_armhf.deb ...
Unpacking bsdmainutils (9.0.6) ...
Selecting previously unselected package man-db.
Preparing to unpack .../man-db_2.7.0.2-5_armhf.deb ...
Unpacking man-db (2.7.0.2-5) ...
Selecting previously unselected package libasprintf0c2:armhf.
Preparing to unpack .../libasprintf0c2_0.19.3-2_armhf.deb ...
Unpacking libasprintf0c2:armhf (0.19.3-2) ...
Selecting previously unselected package libnettle4:armhf.
Preparing to unpack .../libnettle4_2.7.1-5_armhf.deb ...
Unpacking libnettle4:armhf (2.7.1-5) ...
Selecting previously unselected package libhogweed2:armhf.
Preparing to unpack .../libhogweed2_2.7.1-5_armhf.deb ...
Unpacking libhogweed2:armhf (2.7.1-5) ...
Selecting previously unselected package libffi6:armhf.
Preparing to unpack .../libffi6_3.1-2_armhf.deb ...
Unpacking libffi6:armhf (3.1-2) ...
Selecting previously unselected package libp11-kit0:armhf.
Preparing to unpack .../libp11-kit0_0.23.1-2_armhf.deb ...
Unpacking libp11-kit0:armhf (0.23.1-2) ...
Selecting previously unselected package libtasn1-6:armhf.
Preparing to unpack .../libtasn1-6_4.4-3_armhf.deb ...
Unpacking libtasn1-6:armhf (4.4-3) ...
Selecting previously unselected package libgnutls-deb0-28:armhf.
Preparing to unpack .../libgnutls-deb0-28_3.3.8-7_armhf.deb ...
Unpacking libgnutls-deb0-28:armhf (3.3.8-7) ...
Selecting previously unselected package libkeyutils1:armhf.
Preparing to unpack .../libkeyutils1_1.5.9-5_armhf.deb ...
Unpacking libkeyutils1:armhf (1.5.9-5) ...
Selecting previously unselected package libkrb5support0:armhf.
Preparing to unpack .../libkrb5support0_1.12.1+dfsg-19_armhf.deb ...
Unpacking libkrb5support0:armhf (1.12.1+dfsg-19) ...
Selecting previously unselected package libk5crypto3:armhf.
Preparing to unpack .../libk5crypto3_1.12.1+dfsg-19_armhf.deb ...
Unpacking libk5crypto3:armhf (1.12.1+dfsg-19) ...
Selecting previously unselected package libkrb5-3:armhf.
Preparing to unpack .../libkrb5-3_1.12.1+dfsg-19_armhf.deb ...
Unpacking libkrb5-3:armhf (1.12.1+dfsg-19) ...
Selecting previously unselected package libgssapi-krb5-2:armhf.
Preparing to unpack .../libgssapi-krb5-2_1.12.1+dfsg-19_armhf.deb ...
Unpacking libgssapi-krb5-2:armhf (1.12.1+dfsg-19) ...
Selecting previously unselected package libidn11:armhf.
Preparing to unpack .../libidn11_1.30-1_armhf.deb ...
Unpacking libidn11:armhf (1.30-1) ...
Selecting previously unselected package libsasl2-modules-db:armhf.
Preparing to unpack .../libsasl2-modules-db_2.1.26.dfsg1-13_armhf.deb ...
Unpacking libsasl2-modules-db:armhf (2.1.26.dfsg1-13) ...
Selecting previously unselected package libsasl2-2:armhf.
Preparing to unpack .../libsasl2-2_2.1.26.dfsg1-13_armhf.deb ...
Unpacking libsasl2-2:armhf (2.1.26.dfsg1-13) ...
Selecting previously unselected package libldap-2.4-2:armhf.
Preparing to unpack .../libldap-2.4-2_2.4.40+dfsg-1_armhf.deb ...
Unpacking libldap-2.4-2:armhf (2.4.40+dfsg-1) ...
Selecting previously unselected package libmagic1:armhf.
Preparing to unpack .../libmagic1_1%3a5.22+15-2_armhf.deb ...
Unpacking libmagic1:armhf (1:5.22+15-2) ...
Selecting previously unselected package libxml2:armhf.
Preparing to unpack .../libxml2_2.9.1+dfsg1-5_armhf.deb ...
Unpacking libxml2:armhf (2.9.1+dfsg1-5) ...
Selecting previously unselected package libsigsegv2:armhf.
Preparing to unpack .../libsigsegv2_2.10-4_armhf.deb ...
Unpacking libsigsegv2:armhf (2.10-4) ...
Selecting previously unselected package m4.
Preparing to unpack .../archives/m4_1.4.17-4_armhf.deb ...
Unpacking m4 (1.4.17-4) ...
Selecting previously unselected package libfl-dev:armhf.
Preparing to unpack .../libfl-dev_2.5.39-8_armhf.deb ...
Unpacking libfl-dev:armhf (2.5.39-8) ...
Selecting previously unselected package flex.
Preparing to unpack .../flex_2.5.39-8_armhf.deb ...
Unpacking flex (2.5.39-8) ...
Selecting previously unselected package libbsd0:armhf.
Preparing to unpack .../libbsd0_0.7.0-2_armhf.deb ...
Unpacking libbsd0:armhf (0.7.0-2) ...
Selecting previously unselected package libglib2.0-0:armhf.
Preparing to unpack .../libglib2.0-0_2.42.1-1_armhf.deb ...
Unpacking libglib2.0-0:armhf (2.42.1-1) ...
Selecting previously unselected package libcroco3:armhf.
Preparing to unpack .../libcroco3_0.6.8-3_armhf.deb ...
Unpacking libcroco3:armhf (0.6.8-3) ...
Selecting previously unselected package librtmp1:armhf.
Preparing to unpack .../librtmp1_2.4+20150115.gita107cef-1_armhf.deb ...
Unpacking librtmp1:armhf (2.4+20150115.gita107cef-1) ...
Selecting previously unselected package libssh2-1:armhf.
Preparing to unpack .../libssh2-1_1.5.0-2_armhf.deb ...
Unpacking libssh2-1:armhf (1.5.0-2) ...
Selecting previously unselected package libcurl3:armhf.
Preparing to unpack .../libcurl3_7.42.1-1_armhf.deb ...
Unpacking libcurl3:armhf (7.42.1-1) ...
Selecting previously unselected package libgeoip1:armhf.
Preparing to unpack .../libgeoip1_1.6.2-4_armhf.deb ...
Unpacking libgeoip1:armhf (1.6.2-4) ...
Selecting previously unselected package libunistring0:armhf.
Preparing to unpack .../libunistring0_0.9.3-5.2_armhf.deb ...
Unpacking libunistring0:armhf (0.9.3-5.2) ...
Selecting previously unselected package libmilter1.0.1:armhf.
Preparing to unpack .../libmilter1.0.1_8.14.4-8_armhf.deb ...
Unpacking libmilter1.0.1:armhf (8.14.4-8) ...
Selecting previously unselected package file.
Preparing to unpack .../file_1%3a5.22+15-2_armhf.deb ...
Unpacking file (1:5.22+15-2) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../gettext-base_0.19.3-2_armhf.deb ...
Unpacking gettext-base (0.19.3-2) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../autotools-dev_20140911.1_all.deb ...
Unpacking autotools-dev (20140911.1) ...
Selecting previously unselected package libbison-dev:armhf.
Preparing to unpack .../libbison-dev_2%3a3.0.2.dfsg-2_armhf.deb ...
Unpacking libbison-dev:armhf (2:3.0.2.dfsg-2) ...
Selecting previously unselected package bison.
Preparing to unpack .../bison_2%3a3.0.2.dfsg-2_armhf.deb ...
Unpacking bison (2:3.0.2.dfsg-2) ...
Selecting previously unselected package gettext.
Preparing to unpack .../gettext_0.19.3-2_armhf.deb ...
Unpacking gettext (0.19.3-2) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../intltool-debian_0.35.0+20060710.1_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.1) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../po-debconf_1.0.16+nmu3_all.deb ...
Unpacking po-debconf (1.0.16+nmu3) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../debhelper_9.20150101_all.deb ...
Unpacking debhelper (9.20150101) ...
Selecting previously unselected package diffstat.
Preparing to unpack .../diffstat_1.58-1_armhf.deb ...
Unpacking diffstat (1.58-1) ...
Selecting previously unselected package geoip-bin.
Preparing to unpack .../geoip-bin_1.6.2-4_armhf.deb ...
Unpacking geoip-bin (1.6.2-4) ...
Selecting previously unselected package libcurl4-openssl-dev:armhf.
Preparing to unpack .../libcurl4-openssl-dev_7.42.1-1_armhf.deb ...
Unpacking libcurl4-openssl-dev:armhf (7.42.1-1) ...
Selecting previously unselected package libgeoip-dev.
Preparing to unpack .../libgeoip-dev_1.6.2-4_armhf.deb ...
Unpacking libgeoip-dev (1.6.2-4) ...
Selecting previously unselected package libspf2-2.
Preparing to unpack .../libspf2-2_1.2.10-5_armhf.deb ...
Unpacking libspf2-2 (1.2.10-5) ...
Selecting previously unselected package libspf2-dev.
Preparing to unpack .../libspf2-dev_1.2.10-5_armhf.deb ...
Unpacking libspf2-dev (1.2.10-5) ...
Selecting previously unselected package zlib1g-dev:armhf.
Preparing to unpack .../zlib1g-dev_1%3a1.2.8.dfsg-2_armhf.deb ...
Unpacking zlib1g-dev:armhf (1:1.2.8.dfsg-2) ...
Selecting previously unselected package libssl-dev:armhf.
Preparing to unpack .../libssl-dev_1.0.1k-3_armhf.deb ...
Unpacking libssl-dev:armhf (1.0.1k-3) ...
Selecting previously unselected package quilt.
Preparing to unpack .../archives/quilt_0.63-3_all.deb ...
Unpacking quilt (0.63-3) ...
Selecting previously unselected package libmilter-dev.
Preparing to unpack .../libmilter-dev_8.14.4-8_armhf.deb ...
Unpacking libmilter-dev (8.14.4-8) ...
Selecting previously unselected package libopendkim10.
Preparing to unpack .../libopendkim10_2.10.1-2_armhf.deb ...
Unpacking libopendkim10 (2.10.1-2) ...
Selecting previously unselected package libopendkim-dev.
Preparing to unpack .../libopendkim-dev_2.10.1-2_armhf.deb ...
Unpacking libopendkim-dev (2.10.1-2) ...
Selecting previously unselected package sbuild-build-depends-milter-greylist-dummy.
Preparing to unpack .../sbuild-build-depends-milter-greylist-dummy.deb ...
Unpacking sbuild-build-depends-milter-greylist-dummy (0.invalid.0) ...
Setting up libpipeline1:armhf (1.4.0-1) ...
Setting up libssl1.0.0:armhf (1.0.1k-3) ...
Setting up groff-base (1.22.3-1) ...
Setting up bsdmainutils (9.0.6) ...
update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode
update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode
Setting up man-db (2.7.0.2-5) ...
Not building database; man-db/auto-update is not 'true'.
Setting up libasprintf0c2:armhf (0.19.3-2) ...
Setting up libnettle4:armhf (2.7.1-5) ...
Setting up libhogweed2:armhf (2.7.1-5) ...
Setting up libffi6:armhf (3.1-2) ...
Setting up libp11-kit0:armhf (0.23.1-2) ...
Setting up libtasn1-6:armhf (4.4-3) ...
Setting up libgnutls-deb0-28:armhf (3.3.8-7) ...
Setting up libkeyutils1:armhf (1.5.9-5) ...
Setting up libkrb5support0:armhf (1.12.1+dfsg-19) ...
Setting up libk5crypto3:armhf (1.12.1+dfsg-19) ...
Setting up libkrb5-3:armhf (1.12.1+dfsg-19) ...
Setting up libgssapi-krb5-2:armhf (1.12.1+dfsg-19) ...
Setting up libidn11:armhf (1.30-1) ...
Setting up libsasl2-modules-db:armhf (2.1.26.dfsg1-13) ...
Setting up libsasl2-2:armhf (2.1.26.dfsg1-13) ...
Setting up libldap-2.4-2:armhf (2.4.40+dfsg-1) ...
Setting up libmagic1:armhf (1:5.22+15-2) ...
Setting up libxml2:armhf (2.9.1+dfsg1-5) ...
Setting up libsigsegv2:armhf (2.10-4) ...
Setting up m4 (1.4.17-4) ...
Setting up libfl-dev:armhf (2.5.39-8) ...
Setting up flex (2.5.39-8) ...
Setting up libbsd0:armhf (0.7.0-2) ...
Setting up libglib2.0-0:armhf (2.42.1-1) ...
No schema files found: doing nothing.
Setting up libcroco3:armhf (0.6.8-3) ...
Setting up librtmp1:armhf (2.4+20150115.gita107cef-1) ...
Setting up libssh2-1:armhf (1.5.0-2) ...
Setting up libcurl3:armhf (7.42.1-1) ...
Setting up libgeoip1:armhf (1.6.2-4) ...
Setting up libunistring0:armhf (0.9.3-5.2) ...
Setting up libmilter1.0.1:armhf (8.14.4-8) ...
Setting up file (1:5.22+15-2) ...
Setting up gettext-base (0.19.3-2) ...
Setting up autotools-dev (20140911.1) ...
Setting up libbison-dev:armhf (2:3.0.2.dfsg-2) ...
Setting up bison (2:3.0.2.dfsg-2) ...
update-alternatives: using /usr/bin/bison.yacc to provide /usr/bin/yacc (yacc) in auto mode
Setting up gettext (0.19.3-2) ...
Setting up intltool-debian (0.35.0+20060710.1) ...
Setting up po-debconf (1.0.16+nmu3) ...
Setting up debhelper (9.20150101) ...
Setting up diffstat (1.58-1) ...
Setting up geoip-bin (1.6.2-4) ...
Setting up libcurl4-openssl-dev:armhf (7.42.1-1) ...
Setting up libgeoip-dev (1.6.2-4) ...
Setting up libspf2-2 (1.2.10-5) ...
Setting up libspf2-dev (1.2.10-5) ...
Setting up zlib1g-dev:armhf (1:1.2.8.dfsg-2) ...
Setting up libssl-dev:armhf (1.0.1k-3) ...
Setting up quilt (0.63-3) ...
Setting up libmilter-dev (8.14.4-8) ...
Setting up libopendkim10 (2.10.1-2) ...
Setting up libopendkim-dev (2.10.1-2) ...
Setting up sbuild-build-depends-milter-greylist-dummy (0.invalid.0) ...
Processing triggers for libc-bin (2.19-18) ...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Build environment │
└──────────────────────────────────────────────────────────────────────────────┘
Kernel: Linux 3.19.0-trunk-armmp armhf (armv7l)
Toolchain package versions: binutils_2.25-5 dpkg-dev_1.17.25 g++-4.9_4.9.2-10 gcc-4.9_4.9.2-10 libc6-dev_2.19-18 libstdc++-4.9-dev_4.9.2-10 libstdc++6_4.9.2-10 linux-libc-dev_3.16.7-ckt4-1+rpi1
Package versions: acl_2.2.52-2 adduser_3.113+nmu3 apt_1.0.9.8 autotools-dev_20140911.1 base-files_8+rpi1 base-passwd_3.5.37 bash_4.3-11 binutils_2.25-5 bison_2:3.0.2.dfsg-2 bsdmainutils_9.0.6 bsdutils_1:2.25.2-6 build-essential_11.7 bzip2_1.0.6-7 coreutils_8.23-4 cpio_2.11+dfsg-4.1 cpp_4:4.9.2-2 cpp-4.9_4.9.2-10 dash_0.5.7-4 debconf_1.5.56 debconf-i18n_1.5.56 debfoster_2.7-2 debhelper_9.20150101 debianutils_4.4 diffstat_1.58-1 diffutils_1:3.3-1 dmsetup_2:1.02.90-2.2 dpkg_1.17.25 dpkg-dev_1.17.25 e2fslibs_1.42.12-1.1 e2fsprogs_1.42.12-1.1 fakeroot_1.20.2-1 file_1:5.22+15-2 findutils_4.4.2-9 flex_2.5.39-8 g++_4:4.9.2-2 g++-4.9_4.9.2-10 gcc_4:4.9.2-2 gcc-4.6-base_4.6.4-5+rpi1 gcc-4.7-base_4.7.3-11+rpi1 gcc-4.8-base_4.8.4-1 gcc-4.9_4.9.2-10 gcc-4.9-base_4.9.2-10 geoip-bin_1.6.2-4 gettext_0.19.3-2 gettext-base_0.19.3-2 gnupg_1.4.18-7 gpgv_1.4.18-7 grep_2.20-4.1 groff-base_1.22.3-1 gzip_1.6-4 hostname_3.15 init_1.22 init-system-helpers_1.22 initramfs-tools_0.120 initscripts_2.88dsf-59 insserv_1.14.0-5 intltool-debian_0.35.0+20060710.1 klibc-utils_2.0.4-2+rpi1 kmod_18-3 libacl1_2.2.52-2 libapt-pkg4.12_1.0.9.8 libasan1_4.9.2-10 libasprintf0c2_0.19.3-2 libatomic1_4.9.2-10 libattr1_1:2.4.47-2 libaudit-common_1:2.4-1 libaudit1_1:2.4-1 libbison-dev_2:3.0.2.dfsg-2 libblkid1_2.25.2-6 libbsd0_0.7.0-2 libbz2-1.0_1.0.6-7 libc-bin_2.19-18 libc-dev-bin_2.19-18 libc6_2.19-18 libc6-dev_2.19-18 libcap2_1:2.24-8 libcap2-bin_1:2.24-8 libcloog-isl4_0.18.2-1 libcomerr2_1.42.12-1.1 libcroco3_0.6.8-3 libcryptsetup4_2:1.6.6-5 libcurl3_7.42.1-1 libcurl4-openssl-dev_7.42.1-1 libdb5.3_5.3.28-9 libdbus-1-3_1.8.16-1 libdebconfclient0_0.192 libdevmapper1.02.1_2:1.02.90-2.2 libdpkg-perl_1.17.25 libdrm2_2.4.58-2 libfakeroot_1.20.2-1 libffi6_3.1-2 libfl-dev_2.5.39-8 libgc1c2_1:7.2d-6.4 libgcc-4.9-dev_4.9.2-10 libgcc1_1:4.9.2-10 libgcrypt20_1.6.3-2 libgdbm3_1.8.3-13.1 libgeoip-dev_1.6.2-4 libgeoip1_1.6.2-4 libglib2.0-0_2.42.1-1 libgmp10_2:6.0.0+dfsg-6+rpi1 libgnutls-deb0-28_3.3.8-7 libgomp1_4.9.2-10 libgpg-error0_1.17-3 libgssapi-krb5-2_1.12.1+dfsg-19 libhogweed2_2.7.1-5 libidn11_1.30-1 libisl10_0.12.2-2 libk5crypto3_1.12.1+dfsg-19 libkeyutils1_1.5.9-5 libklibc_2.0.4-2+rpi1 libkmod2_18-3 libkrb5-3_1.12.1+dfsg-19 libkrb5support0_1.12.1+dfsg-19 libldap-2.4-2_2.4.40+dfsg-1 liblocale-gettext-perl_1.05-8+b1 liblzma5_5.1.1alpha+20120614-2 libmagic1_1:5.22+15-2 libmilter-dev_8.14.4-8 libmilter1.0.1_8.14.4-8 libmount1_2.25.2-6 libmpc3_1.0.2-1 libmpfr4_3.1.2-2 libncurses5_5.9+20140913-1 libncursesw5_5.9+20140913-1 libnettle4_2.7.1-5 libnih-dbus1_1.0.3-4.3 libnih1_1.0.3-4.3 libopendkim-dev_2.10.1-2 libopendkim10_2.10.1-2 libp11-kit0_0.23.1-2 libpam-modules_1.1.8-3.1 libpam-modules-bin_1.1.8-3.1 libpam-runtime_1.1.8-3.1 libpam0g_1.1.8-3.1 libpcre3_2:8.35-3.3 libpipeline1_1.4.0-1 libpng12-0_1.2.50-2 libprocps3_2:3.3.9-9 libreadline6_6.3-8 librtmp1_2.4+20150115.gita107cef-1 libsasl2-2_2.1.26.dfsg1-13 libsasl2-modules-db_2.1.26.dfsg1-13 libselinux1_2.3-2 libsemanage-common_2.3-1 libsemanage1_2.3-1 libsepol1_2.3-2 libsigsegv2_2.10-4 libslang2_2.3.0-2 libsmartcols1_2.25.2-6 libspf2-2_1.2.10-5 libspf2-dev_1.2.10-5 libss2_1.42.12-1.1 libssh2-1_1.5.0-2 libssl-dev_1.0.1k-3 libssl1.0.0_1.0.1k-3 libstdc++-4.9-dev_4.9.2-10 libstdc++6_4.9.2-10 libsystemd0_215-17 libtasn1-6_4.4-3 libtext-charwidth-perl_0.04-7+b4 libtext-iconv-perl_1.7-5+b5 libtext-wrapi18n-perl_0.06-7 libtimedate-perl_2.3000-2 libtinfo5_5.9+20140913-1 libubsan0_4.9.2-10 libudev1_215-17 libunistring0_0.9.3-5.2 libusb-0.1-4_2:0.1.12-25 libustr-1.0-1_1.0.4-3 libuuid1_2.25.2-6 libxml2_2.9.1+dfsg1-5 linux-libc-dev_3.16.7-ckt4-1+rpi1 login_1:4.2-3 lsb-base_4.1+Debian13+rpi1+nmu1 m4_1.4.17-4 make_4.0-8.1 makedev_2.3.1-93 man-db_2.7.0.2-5 mawk_1.3.3-17 mount_2.25.2-6 mountall_2.54 multiarch-support_2.19-18 ncurses-base_5.9+20140913-1 ncurses-bin_5.9+20140913-1 passwd_1:4.2-3 patch_2.7.5-1 perl_5.20.2-3 perl-base_5.20.2-3 perl-modules_5.20.2-3 plymouth_0.9.0-9 po-debconf_1.0.16+nmu3 procps_2:3.3.9-9 quilt_0.63-3 raspbian-archive-keyring_20120528.2 readline-common_6.3-8 sbuild-build-depends-core-dummy_0.invalid.0 sbuild-build-depends-milter-greylist-dummy_0.invalid.0 sed_4.2.2-4 sensible-utils_0.0.9 startpar_0.59-3 systemd_215-17 systemd-sysv_215-17 sysv-rc_2.88dsf-59 sysvinit-utils_2.88dsf-59 tar_1.27.1-2 tzdata_2015c-1 udev_215-17 util-linux_2.25.2-6 xz-utils_5.1.1alpha+20120614-2 zlib1g_1:1.2.8.dfsg-2 zlib1g-dev_1:1.2.8.dfsg-2
┌──────────────────────────────────────────────────────────────────────────────┐
│ Build │
└──────────────────────────────────────────────────────────────────────────────┘
Unpack source
─────────────
gpgv: keyblock resource `/sbuild-nonexistent/.gnupg/trustedkeys.gpg': file open error
gpgv: Signature made Sun Aug 3 10:54:01 2014 UTC using RSA key ID 61F9CA53
gpgv: Can't check signature: public key not found
dpkg-source: warning: failed to verify signature on ./milter-greylist_4.5.11-1.dsc
dpkg-source: info: extracting milter-greylist in milter-greylist-4.5.11
dpkg-source: info: unpacking milter-greylist_4.5.11.orig.tar.gz
dpkg-source: info: unpacking milter-greylist_4.5.11-1.debian.tar.xz
dpkg-source: info: applying m4.socket-options
dpkg-source: info: applying greylist.conf
dpkg-source: info: applying rc-debian.utf8
dpkg-source: info: applying rc-debian.socket
dpkg-source: info: applying conf-dumpfreq
dpkg-source: info: applying tempfs.508122
dpkg-source: info: applying initfile.mountall
dpkg-source: info: applying 573936-dump_lex
dpkg-source: info: applying initfile.lsb
dpkg-source: info: applying initfile.nosudo
Check disc space
────────────────
Sufficient free space for build
Hack binNMU version
───────────────────
Created changelog entry for binNMU version 4.5.11-1+b1
User Environment
────────────────
APT_CONFIG=/var/lib/sbuild/apt.conf
DEB_BUILD_OPTIONS=parallel=4
HOME=/sbuild-nonexistent
LANG=en_GB.UTF-8
LC_ALL=POSIX
LOGNAME=root
MAIL=/var/mail/root
OLDPWD=/usr/share/debootstrap/scripts
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
PWD=/root
SCHROOT_ALIAS_NAME=stretch-staging-armhf-sbuild
SCHROOT_CHROOT_NAME=stretch-staging-armhf-sbuild
SCHROOT_COMMAND=env
SCHROOT_GID=109
SCHROOT_GROUP=buildd
SCHROOT_SESSION_ID=stretch-staging-armhf-sbuild-4e9733d7-508b-49fa-88c9-18a629b55b4d
SCHROOT_UID=104
SCHROOT_USER=buildd
SHELL=/bin/sh
SHLVL=1
SSH_CLIENT=172.17.0.6 44468 22
SSH_CONNECTION=172.17.0.6 44468 172.17.2.1 22
SSH_TTY=/dev/pts/0
TERM=xterm
USER=buildd
_=/etc/init.d/buildd
dpkg-buildpackage
─────────────────
dpkg-buildpackage: source package milter-greylist
dpkg-buildpackage: source version 4.5.11-1+b1
dpkg-buildpackage: source distribution stretch-staging
dpkg-source --before-build milter-greylist-4.5.11
dpkg-buildpackage: host architecture armhf
fakeroot debian/rules clean
dh clean --with autotools_dev
dh_testdir
debian/rules override_dh_auto_clean
make[1]: Entering directory '/«PKGBUILDDIR»'
dh_auto_clean
make[2]: Entering directory '/«PKGBUILDDIR»'
rm -f milter-greylist milter-greylist.o pending.o sync.o dnsrbl.o list.o macro.o conf.o store.o dump.o spf.o acl.o urlcheck.o stat.o clock.o geoip.o fd_pool.o prop.o ldapcheck.o dkimcheck.o p0f.o spamd.o mx.o ratelimit.o nsupdate.o brokenmfapi.o conf_yacc.o dump_yacc.o .objseq-built conf_yacc.c conf_lex.c dump_yacc.c dump_lex.c \
rc-redhat.sh rc-bsd.sh rc-solaris.sh rc-debian.sh rc-gentoo.sh \
rc-suse.sh y.tab.c
sync || true
rm -Rf Makefile config.h config.log config.status \
autom4te.cache configure.lineno *.orig *.bak autoscan.log
sync || true
make[2]: Leaving directory '/«PKGBUILDDIR»'
rm -f debian/milter-greylist.init
# The following keeps lintian happy
rm -f milter-greylist.spec
# Sometimes autoconf doesn't clean up after itself
rm -f config.log
make[1]: Leaving directory '/«PKGBUILDDIR»'
dh_autotools-dev_restoreconfig
dh_clean
debian/rules build-arch
dh build-arch --with autotools_dev
dh_testdir -a
dh_autotools-dev_updateconfig -a
debian/rules override_dh_auto_configure
make[1]: Entering directory '/«PKGBUILDDIR»'
dh_auto_configure -- \
--with-user=greylist \
--sysconfdir=/etc/milter-greylist \
--with-conffile=/etc/milter-greylist/greylist.conf \
--with-dumpfile=/var/lib/milter-greylist/greylist.db \
--with-libspf2=/usr \
--with-libcurl=/usr \
--with-libmilter=/usr \
--with-libopendkim=/usr \
--with-libGeoIP=/usr \
--enable-dnsrbl \
--disable-rpath \
LDFLAGS=" -Wl,-z,defs -L/usr/lib/libmilter -Wl,-z,relro " \
CFLAGS=" -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security "
configure: WARNING: unrecognized options: --disable-maintainer-mode, --disable-dependency-tracking
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for flex... flex
checking lex output file root... lex.yy
checking lex library... -lfl
checking whether yytext is a pointer... yes
checking for bison... bison -y
checking for a BSD-compatible install... /usr/bin/install -c
checking for mkdep... no
checking for rm... rm
checking for mv... mv
checking for test... test
checking for sed... sed
checking for true... true
checking for touch... touch
checking if compiler accepts -Wall... yes
checking if compiler accepts -Werror... no
checking if ld accepts -R... yes
checking if ld accepts --rpath... yes
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for strings.h... (cached) yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking syslog.h usability... yes
checking syslog.h presence... yes
checking for syslog.h... yes
checking for unistd.h... (cached) yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking getopt.h usability... yes
checking getopt.h presence... yes
checking for getopt.h... yes
checking sys/cdefs.h usability... yes
checking sys/cdefs.h presence... yes
checking for sys/cdefs.h... yes
checking arpa/nameser.h usability... yes
checking arpa/nameser.h presence... yes
checking for arpa/nameser.h... yes
checking stdbool.h usability... yes
checking stdbool.h presence... yes
checking for stdbool.h... yes
checking sys/queue.h usability... yes
checking sys/queue.h presence... yes
checking for sys/queue.h... yes
checking for pid_t... yes
checking for size_t... yes
checking whether time.h and sys/time.h may both be included... yes
checking for res_state... yes
checking if -lcurl needs -lcrypto to link and run... no
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for strftime... yes
checking for working memcmp... yes
checking sys/select.h usability... yes
checking sys/select.h presence... yes
checking for sys/select.h... yes
checking for sys/socket.h... (cached) yes
checking types of arguments for select... int,fd_set *,struct timeval *
checking whether lstat correctly handles trailing slash... yes
checking whether stat accepts an empty string... no
checking for bzero... yes
checking for gettimeofday... yes
checking for malloc... yes
checking for inet_ntoa... yes
checking for strerror... yes
checking for select... yes
checking for socket... yes
checking for initgroups... yes
checking for strlcat... no
checking for vsyslog... yes
checking for strcasestr... yes
checking for getaddrinfo... yes
checking for getnameinfo... yes
checking for pthread_create in -lpthread... yes
checking for SPF_server_new in -lspf2... yes
checking for dkim_init in -lopendkim -lcrypto... yes
checking for dkim_init in -lopendkim -lcrypto... (cached) yes
checking for socket in -lsocket... no
checking for socket in -lsocket -lnsl... no
checking for inet_aton in -lresolv... yes
checking for inet_pton in -lnsl... yes
checking for res_ninit... yes
checking for res_ndestroy... no
checking for res_nupdate... no
checking for getaddrinfo... (cached) yes
checking for getnameinfo... (cached) yes
checking if <time.h> defines timeradd... yes
checking if -D_REENTRANT is needed to use localtime_r and strtok_r... no
checking if -D__EXTENSIONS__ is needed to use snprintf... no
checking for smfi_register in -lmilter... yes
checking for struct smfiDesc.xxfi_data... yes
checking if -lpthread is needed after -lmilter... no
checking if <sys/queue.h> is outdated... no
checking if __RCSID can be used twice in the same source... yes
checking whether <pthreads.h> wants -pthread... no
checking whether you need -D_XOPEN_SOURCE to use libpthread... no
checking if -D_OSF_SOURCE is needed for IPV6 support... no
checking for struct sockaddr.sa_len... no
checking for struct sockaddr_in6.sin6_scope_id... yes
checking if socklen_t is missing... no
checking for broken rwlock in libpthread... no
checking if DNS resolver is re-entrant... yes
logname: no login name
configure: creating ./config.status
config.status: creating Makefile
config.status: creating milter-greylist.spec
config.status: creating config.h
configure: WARNING: unrecognized options: --disable-maintainer-mode, --disable-dependency-tracking
make[1]: Leaving directory '/«PKGBUILDDIR»'
dh_auto_build -a
make[1]: Entering directory '/«PKGBUILDDIR»'
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o milter-greylist.o milter-greylist.c
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o pending.o pending.c
pending.c: In function 'pending_tarpitted':
pending.c:507:9: warning: variable 'now' set but not used [-Wunused-but-set-variable]
time_t now;
^
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o sync.o sync.c
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o dnsrbl.o dnsrbl.c
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o list.o list.c
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o macro.o macro.c
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o conf.o conf.c
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o store.o store.c
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o dump.o dump.c
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o spf.o spf.c
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o acl.o acl.c
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o urlcheck.o urlcheck.c
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o stat.o stat.c
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o clock.o clock.c
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o geoip.o geoip.c
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o fd_pool.o fd_pool.c
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o prop.o prop.c
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o ldapcheck.o ldapcheck.c
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o dkimcheck.o dkimcheck.c
dkimcheck.c: In function 'dkimcheck_header':
dkimcheck.c:222:43: warning: pointer targets in passing argument 2 of 'dkim_verify' differ in signedness [-Wpointer-sign]
priv->priv_dkim = dkim_verify(dkim_ptr, priv->priv_queueid,
^
In file included from dkimcheck.c:51:0:
/usr/include/opendkim/dkim.h:434:14: note: expected 'const unsigned char *' but argument is of type 'char *'
extern DKIM *dkim_verify __P((DKIM_LIB *libhandle, const unsigned char *id,
^
dkimcheck.c:231:9: warning: pointer targets in assignment differ in signedness [-Wpointer-sign]
header = header_lf2crlf(name, value, &len);
^
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o p0f.o p0f.c
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o spamd.o spamd.c
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o mx.o mx.c
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o ratelimit.o ratelimit.c
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o nsupdate.o nsupdate.c
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o brokenmfapi.o brokenmfapi.c
=== Call make sequential for objects sensitive to that (current make='make' MAKEFLAGS='w'):
make -j 1 bld-seq
make[2]: Entering directory '/«PKGBUILDDIR»'
bison -y -p`echo conf_yacc.c|sed 's/^\([^_]\{1,\}_\).*$/\1/'` conf_yacc.y
mv y.tab.c conf_yacc.c
flex -oconf_lex.c conf_lex.l
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o conf_yacc.o conf_yacc.c
In file included from conf_yacc.y:2318:0:
conf_lex.c:2918:17: warning: 'yyunput' defined but not used [-Wunused-function]
static void yyunput (int c, register char * yy_bp )
^
conf_lex.c:2959:16: warning: 'input' defined but not used [-Wunused-function]
static int input (void)
^
bison -y -p`echo dump_yacc.c|sed 's/^\([^_]\{1,\}_\).*$/\1/'` dump_yacc.y
mv y.tab.c dump_yacc.c
flex -odump_lex.c dump_lex.l
gcc -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wall -I/usr/include -I/usr/include -DUSE_CURL -I/usr/include -DUSE_GEOIP -I/usr/include -I/usr/include/opendkim -I/usr/include/opendkim -DHAVE_DATA_CALLBACK -DUSE_DNSRBL -DCONFFILE=\"/etc/milter-greylist/greylist.conf\" -DDUMPFILE=\"/var/lib/milter-greylist/greylist.db\" -D_BSD_SOURCE -I. -I. -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -c -o dump_yacc.o dump_yacc.c
In file included from dump_yacc.y:97:0:
dump_lex.c:1291:17: warning: 'yyunput' defined but not used [-Wunused-function]
static void yyunput (int c, register char * yy_bp )
^
dump_lex.c:1332:16: warning: 'input' defined but not used [-Wunused-function]
static int input (void)
^
test -f .objseq-built || touch .objseq-built
make[2]: Leaving directory '/«PKGBUILDDIR»'
sync || true
=== Linking milter-greylist:
gcc -o milter-greylist milter-greylist.o pending.o sync.o dnsrbl.o list.o macro.o conf.o store.o dump.o spf.o acl.o urlcheck.o stat.o clock.o geoip.o fd_pool.o prop.o ldapcheck.o dkimcheck.o p0f.o spamd.o mx.o ratelimit.o nsupdate.o brokenmfapi.o conf_yacc.o dump_yacc.o -Wl,-z,defs -L/usr/lib/libmilter -Wl,-z,relro -lGeoIP -lcurl -lpthread -lspf2 -lopendkim -lcrypto -lopendkim -lcrypto -lresolv -lnsl -lmilter
sed "s|@BINDIR[@]|/usr/bin|g; s|@SBINDIR[@]|/usr/sbin|g; s|@USER[@]|greylist|g" ./rc-bsd.sh.in > rc-bsd.sh
sed "s|@BINDIR[@]|/usr/bin|g; s|@SBINDIR[@]|/usr/sbin|g; s|@USER[@]|greylist|g" ./rc-redhat.sh.in > rc-redhat.sh
sed "s|@BINDIR[@]|/usr/bin|g; s|@SBINDIR[@]|/usr/sbin|g; s|@USER[@]|greylist|g" ./rc-solaris.sh.in > rc-solaris.sh
sed "s|@BINDIR[@]|/usr/bin|g; s|@SBINDIR[@]|/usr/sbin|g; s|@USER[@]|greylist|g" ./rc-debian.sh.in > rc-debian.sh
sed "s|@BINDIR[@]|/usr/bin|g; s|@SBINDIR[@]|/usr/sbin|g; s|@USER[@]|greylist|g" ./rc-gentoo.sh.in > rc-gentoo.sh
sed "s|@BINDIR[@]|/usr/bin|g; s|@SBINDIR[@]|/usr/sbin|g; s|@USER[@]|greylist|g" ./rc-suse.sh.in > rc-suse.sh
make[1]: Leaving directory '/«PKGBUILDDIR»'
dh_auto_test -a
fakeroot debian/rules binary-arch
dh binary-arch --with autotools_dev
dh_testroot -a
dh_prep -a
dh_installdirs -a
debian/rules override_dh_auto_install
make[1]: Entering directory '/«PKGBUILDDIR»'
cp rc-debian.sh debian/milter-greylist.init
DESTDIR=/«PKGBUILDDIR»/debian/milter-greylist make install-sbin install-man
make[2]: Entering directory '/«PKGBUILDDIR»'
=== Call make sequential for objects sensitive to that (current make='make' MAKEFLAGS='w'):
make -j 1 bld-seq
make[3]: Entering directory '/«PKGBUILDDIR»'
test -f .objseq-built || touch .objseq-built
make[3]: Leaving directory '/«PKGBUILDDIR»'
sync || true
/usr/bin/install -c -d -m 755 /«PKGBUILDDIR»/debian/milter-greylist/usr/sbin
/usr/bin/install -c -m 755 milter-greylist /«PKGBUILDDIR»/debian/milter-greylist/usr/sbin
/usr/bin/install -c -d -m 755 /«PKGBUILDDIR»/debian/milter-greylist/usr/share/man/man8
/usr/bin/install -c -d -m 755 /«PKGBUILDDIR»/debian/milter-greylist/usr/share/man/man5
/usr/bin/install -c -m 644 ./milter-greylist.8 /«PKGBUILDDIR»/debian/milter-greylist/usr/share/man/man8
/usr/bin/install -c -m 644 ./greylist.conf.5 /«PKGBUILDDIR»/debian/milter-greylist/usr/share/man/man5
make[2]: Leaving directory '/«PKGBUILDDIR»'
make[1]: Leaving directory '/«PKGBUILDDIR»'
dh_install -a
dh_installdocs -a
dh_installchangelogs -a
dh_installexamples -a
dh_installman -a
dh_installinit -a
dh_installlogcheck -a
dh_lintian -a
dh_perl -a
dh_link -a
dh_compress -a
dh_fixperms -a
dh_strip -a
dh_makeshlibs -a
dh_shlibdeps -a
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/milter-greylist/usr/sbin/milter-greylist was not linked against libcrypto.so.1.0.0 (it uses none of the library's symbols)
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/milter-greylist/usr/sbin/milter-greylist was not linked against libnsl.so.1 (it uses none of the library's symbols)
dh_installdeb -a
dh_gencontrol -a
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
dh_md5sums -a
dh_builddeb -a
dpkg-deb: building package `milter-greylist' in `../milter-greylist_4.5.11-1+b1_armhf.deb'.
dpkg-genchanges -B -mRaspbian wandboard test autobuilder <root@raspbian.org> >../milter-greylist_4.5.11-1+b1_armhf.changes
dpkg-genchanges: binary-only arch-specific upload (source code and arch-indep packages not included)
dpkg-source --after-build milter-greylist-4.5.11
dpkg-buildpackage: binary-only upload (no source included)
────────────────────────────────────────────────────────────────────────────────
Build finished at 20150502-1810
Finished
────────
I: Built successfully
┌──────────────────────────────────────────────────────────────────────────────┐
│ Changes │
└──────────────────────────────────────────────────────────────────────────────┘
milter-greylist_4.5.11-1+b1_armhf.changes:
──────────────────────────────────────────
Format: 1.8
Date: Sun, 03 Aug 2014 11:46:16 +0100
Source: milter-greylist (4.5.11-1)
Binary: milter-greylist
Architecture: armhf
Version: 4.5.11-1+b1
Distribution: stretch-staging
Urgency: low
Maintainer: Raspbian wandboard test autobuilder <root@raspbian.org>
Changed-By: Raspbian wandboard test autobuilder <root@raspbian.org>
Description:
milter-greylist - Greylist milter for sendmail
Changes:
milter-greylist (4.5.11-1+b1) stretch-staging; urgency=low
.
* Binary-only non-maintainer upload for armhf; no source changes.
* rebuild due to debcheck failure
Checksums-Sha1:
6be6f110b5cc14b7d697c483b658d5d8121d6005 132800 milter-greylist_4.5.11-1+b1_armhf.deb
Checksums-Sha256:
9def051671824219c78c53e5e3fe31864a76cb55170cb0ecbedfb9b5534274d4 132800 milter-greylist_4.5.11-1+b1_armhf.deb
Files:
aa68bfd9f72f2efede3f07e45720bf74 132800 mail extra milter-greylist_4.5.11-1+b1_armhf.deb
┌──────────────────────────────────────────────────────────────────────────────┐
│ Package contents │
└──────────────────────────────────────────────────────────────────────────────┘
milter-greylist_4.5.11-1+b1_armhf.deb
─────────────────────────────────────
new debian package, version 2.0.
size 132800 bytes: control archive=3580 bytes.
138 bytes, 4 lines conffiles
1189 bytes, 25 lines control
1013 bytes, 13 lines md5sums
1229 bytes, 45 lines * postinst #!/bin/sh
2704 bytes, 103 lines * postrm #!/bin/sh
2290 bytes, 81 lines * preinst #!/bin/sh
185 bytes, 7 lines * prerm #!/bin/sh
Package: milter-greylist
Source: milter-greylist (4.5.11-1)
Version: 4.5.11-1+b1
Architecture: armhf
Maintainer: Paul Martin <pm@debian.org>
Installed-Size: 270
Depends: libc6 (>= 2.15), libcurl3 (>= 7.16.2), libgeoip1, libmilter1.0.1, libopendkim10 (>= 2.8.0~beta0), libspf2-2, libssl1.0.0 (>= 1.0.0), adduser (>= 3.11)
Recommends: sendmail | postfix
Section: mail
Priority: extra
Homepage: http://hcpnet.free.fr/milter-greylist/
Description: Greylist milter for sendmail
milter-greylist is a stand-alone milter written in C that implements the
greylist filtering method, as proposed by Evan Harris.
.
Greylisting works by assuming that unlike legitimate MTA, spam engines will
not retry sending their junk mail on a temporary error. The filter will
always temporarily reject mail on a first attempt, and to accept it after
some time has elapsed.
.
If spammers ever try to resend rejected messages, we can assume they will not
stay idle between the two sends (if they do, the spam problem would just be
solved). Odds are good that the spammer will send a mail to an honey pot
address and get blacklisted in several real-time distributed black list
before the second attempt.
drwxr-xr-x root/root 0 2015-05-02 18:10 ./
drwxr-xr-x root/root 0 2015-05-02 18:10 ./etc/
drwxr-xr-x root/root 0 2015-05-02 18:10 ./etc/milter-greylist/
-rw-r--r-- root/root 6120 2015-05-02 18:07 ./etc/milter-greylist/greylist.conf
drwxr-xr-x root/root 0 2015-05-02 18:10 ./etc/default/
-rw-r--r-- root/root 454 2010-03-15 13:33 ./etc/default/milter-greylist
drwxr-xr-x root/root 0 2015-05-02 18:10 ./etc/init.d/
-rwxr-xr-x root/root 2948 2015-05-02 18:10 ./etc/init.d/milter-greylist
drwxr-xr-x root/root 0 2015-05-02 18:10 ./etc/logcheck/
drwxr-xr-x root/root 0 2015-05-02 18:10 ./etc/logcheck/ignore.d.server/
-rw-r--r-- root/root 973 2015-05-02 18:10 ./etc/logcheck/ignore.d.server/milter-greylist
drwxr-xr-x root/root 0 2015-05-02 18:10 ./usr/
drwxr-xr-x root/root 0 2015-05-02 18:10 ./usr/share/
drwxr-xr-x root/root 0 2015-05-02 18:10 ./usr/share/sendmail/
drwxr-xr-x root/root 0 2015-05-02 18:10 ./usr/share/sendmail/cf/
drwxr-xr-x root/root 0 2015-05-02 18:10 ./usr/share/sendmail/cf/feature/
-rw-r--r-- root/root 2551 2015-05-02 18:07 ./usr/share/sendmail/cf/feature/milter-greylist.m4
drwxr-xr-x root/root 0 2015-05-02 18:10 ./usr/share/man/
drwxr-xr-x root/root 0 2015-05-02 18:10 ./usr/share/man/man8/
-rw-r--r-- root/root 4636 2015-05-02 18:10 ./usr/share/man/man8/milter-greylist.8.gz
drwxr-xr-x root/root 0 2015-05-02 18:10 ./usr/share/man/man5/
-rw-r--r-- root/root 15394 2015-05-02 18:10 ./usr/share/man/man5/greylist.conf.5.gz
drwxr-xr-x root/root 0 2015-05-02 18:10 ./usr/share/doc/
drwxr-xr-x root/root 0 2015-05-02 18:10 ./usr/share/doc/milter-greylist/
-rw-r--r-- root/root 720 2010-03-15 13:33 ./usr/share/doc/milter-greylist/README.Debian
-rw-r--r-- root/root 4880 2010-10-11 11:27 ./usr/share/doc/milter-greylist/copyright
drwxr-xr-x root/root 0 2015-05-02 18:10 ./usr/share/doc/milter-greylist/examples/
-rw-r--r-- root/root 2328 2015-05-02 18:07 ./usr/share/doc/milter-greylist/examples/greylist.conf.gz
-rw-r--r-- root/root 3149 2012-05-05 00:42 ./usr/share/doc/milter-greylist/examples/greylist2.conf.gz
-rw-r--r-- root/root 12365 2012-05-05 00:42 ./usr/share/doc/milter-greylist/README.gz
-rw-r--r-- root/root 2572 2015-05-02 18:08 ./usr/share/doc/milter-greylist/changelog.Debian.gz
-rw-r--r-- root/root 266 2010-03-15 13:33 ./usr/share/doc/milter-greylist/NEWS.Debian.gz
-rw-r--r-- root/root 10573 2014-02-21 08:09 ./usr/share/doc/milter-greylist/changelog.gz
drwxr-xr-x root/root 0 2015-05-02 18:10 ./usr/share/lintian/
drwxr-xr-x root/root 0 2015-05-02 18:10 ./usr/share/lintian/overrides/
-rw-r--r-- root/root 38 2014-07-30 08:54 ./usr/share/lintian/overrides/milter-greylist
drwxr-xr-x root/root 0 2015-05-02 18:10 ./usr/sbin/
-rwxr-xr-x root/root 198792 2015-05-02 18:10 ./usr/sbin/milter-greylist
drwxr-xr-x root/root 0 2015-05-02 18:10 ./var/
drwxr-xr-x root/root 0 2015-05-02 18:10 ./var/lib/
drwxr-xr-x root/root 0 2015-05-02 18:10 ./var/lib/milter-greylist/
┌──────────────────────────────────────────────────────────────────────────────┐
│ Post Build │
└──────────────────────────────────────────────────────────────────────────────┘
┌──────────────────────────────────────────────────────────────────────────────┐
│ Cleanup │
└──────────────────────────────────────────────────────────────────────────────┘
Purging /«BUILDDIR»
Not cleaning session: cloned chroot in use
┌──────────────────────────────────────────────────────────────────────────────┐
│ Summary │
└──────────────────────────────────────────────────────────────────────────────┘
Build Architecture: armhf
Build-Space: 4484
Build-Time: 170
Distribution: stretch-staging
Host Architecture: armhf
Install-Time: 263
Job: milter-greylist_4.5.11-1
Machine Architecture: armhf
Package: milter-greylist
Package-Time: 490
Source-Version: 4.5.11-1
Space: 4484
Status: successful
Version: 4.5.11-1+b1
────────────────────────────────────────────────────────────────────────────────
Finished at 20150502-1810
Build needed 00:08:10, 4484k disc space