libcoro-perl →
6.570-3 →
armhf → 2022-10-16 06:46:45
sbuild (Debian sbuild) 0.71.0 (24 Aug 2016) on testbuildd
+==============================================================================+
| libcoro-perl 6.570-3 (armhf) Sun, 16 Oct 2022 06:38:19 +0000 |
+==============================================================================+
Package: libcoro-perl
Version: 6.570-3
Source Version: 6.570-3
Distribution: bookworm-staging
Machine Architecture: armhf
Host Architecture: armhf
Build Architecture: armhf
I: NOTICE: Log filtering will replace 'var/lib/schroot/mount/bookworm-staging-armhf-sbuild-b62e22cb-9526-4f77-9d0a-e5488f225a62' with '<<CHROOT>>'
+------------------------------------------------------------------------------+
| Update chroot |
+------------------------------------------------------------------------------+
Get:1 http://172.17.4.1/private bookworm-staging InRelease [11.3 kB]
Get:2 http://172.17.4.1/private bookworm-staging/main Sources [13.4 MB]
Get:3 http://172.17.4.1/private bookworm-staging/main armhf Packages [14.2 MB]
Fetched 27.6 MB in 29s (943 kB/s)
Reading package lists...
W: No sandbox user '_apt' on the system, can not drop privileges
W: http://172.17.4.1/private/dists/bookworm-staging/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.
+------------------------------------------------------------------------------+
| Fetch source files |
+------------------------------------------------------------------------------+
Check APT
---------
Checking available source versions...
Download source files with APT
------------------------------
Reading package lists...
NOTICE: 'libcoro-perl' packaging is maintained in the 'Git' version control system at:
https://salsa.debian.org/perl-team/modules/packages/libcoro-perl.git
Please use:
git clone https://salsa.debian.org/perl-team/modules/packages/libcoro-perl.git
to retrieve the latest (possibly unreleased) updates to the package.
Need to get 208 kB of source archives.
Get:1 http://172.17.4.1/private bookworm-staging/main libcoro-perl 6.570-3 (dsc) [2237 B]
Get:2 http://172.17.4.1/private bookworm-staging/main libcoro-perl 6.570-3 (tar) [198 kB]
Get:3 http://172.17.4.1/private bookworm-staging/main libcoro-perl 6.570-3 (diff) [8040 B]
Fetched 208 kB in 0s (1205 kB/s)
Download complete and in download only mode
I: NOTICE: Log filtering will replace 'build/libcoro-perl-wBafkp/libcoro-perl-6.570' with '<<PKGBUILDDIR>>'
I: NOTICE: Log filtering will replace 'build/libcoro-perl-wBafkp' with '<<BUILDDIR>>'
+------------------------------------------------------------------------------+
| Install build-essential |
+------------------------------------------------------------------------------+
Setup apt archive
-----------------
Merged Build-Depends: build-essential, fakeroot
Filtered Build-Depends: build-essential, fakeroot
dpkg-deb: building package 'sbuild-build-depends-core-dummy' in '/<<BUILDDIR>>/resolver-3vQ5IB/apt_archive/sbuild-build-depends-core-dummy.deb'.
dpkg-scanpackages: warning: Packages in archive but missing from override file:
dpkg-scanpackages: warning: sbuild-build-depends-core-dummy
dpkg-scanpackages: info: Wrote 1 entries to output Packages file.
gpg: keybox '/<<BUILDDIR>>/resolver-3vQ5IB/gpg/pubring.kbx' created
gpg: /<<BUILDDIR>>/resolver-3vQ5IB/gpg/trustdb.gpg: trustdb created
gpg: key 35506D9A48F77B2E: public key "Sbuild Signer (Sbuild Build Dependency Archive Key) <buildd-tools-devel@lists.alioth.debian.org>" imported
gpg: Total number processed: 1
gpg: imported: 1
gpg: key 35506D9A48F77B2E: "Sbuild Signer (Sbuild Build Dependency Archive Key) <buildd-tools-devel@lists.alioth.debian.org>" not changed
gpg: key 35506D9A48F77B2E: secret key imported
gpg: Total number processed: 1
gpg: unchanged: 1
gpg: secret keys read: 1
gpg: secret keys imported: 1
gpg: using "Sbuild Signer" as default secret key for signing
Ign:1 copy:/<<BUILDDIR>>/resolver-3vQ5IB/apt_archive ./ InRelease
Get:2 copy:/<<BUILDDIR>>/resolver-3vQ5IB/apt_archive ./ Release [957 B]
Get:3 copy:/<<BUILDDIR>>/resolver-3vQ5IB/apt_archive ./ Release.gpg [370 B]
Get:4 copy:/<<BUILDDIR>>/resolver-3vQ5IB/apt_archive ./ Sources [349 B]
Get:5 copy:/<<BUILDDIR>>/resolver-3vQ5IB/apt_archive ./ Packages [433 B]
Fetched 2109 B in 1s (2809 B/s)
Reading package lists...
W: No sandbox user '_apt' on the system, can not drop privileges
Reading package lists...
Install core build dependencies (apt-based resolver)
----------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
krb5-locales libpam-cap netbase sensible-utils
Use 'apt autoremove' to remove them.
The following NEW packages will be installed:
sbuild-build-depends-core-dummy
0 upgraded, 1 newly installed, 0 to remove and 40 not upgraded.
Need to get 848 B of archives.
After this operation, 0 B of additional disk space will be used.
Get:1 copy:/<<BUILDDIR>>/resolver-3vQ5IB/apt_archive ./ sbuild-build-depends-core-dummy 0.invalid.0 [848 B]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 848 B in 0s (22.5 kB/s)
Selecting previously unselected package sbuild-build-depends-core-dummy.
(Reading database ... 12808 files and directories currently installed.)
Preparing to unpack .../sbuild-build-depends-core-dummy_0.invalid.0_armhf.deb ...
Unpacking sbuild-build-depends-core-dummy (0.invalid.0) ...
Setting up sbuild-build-depends-core-dummy (0.invalid.0) ...
W: No sandbox user '_apt' on the system, can not drop privileges
+------------------------------------------------------------------------------+
| Check architectures |
+------------------------------------------------------------------------------+
Arch check ok (armhf included in any)
+------------------------------------------------------------------------------+
| Install package build dependencies |
+------------------------------------------------------------------------------+
Setup apt archive
-----------------
Merged Build-Depends: debhelper-compat (= 13), libanyevent-perl, libcanary-stability-perl, libcommon-sense-perl, libev-perl, libevent-perl, libguard-perl, perl-xs-dev, perl
Filtered Build-Depends: debhelper-compat (= 13), libanyevent-perl, libcanary-stability-perl, libcommon-sense-perl, libev-perl, libevent-perl, libguard-perl, perl-xs-dev, perl
dpkg-deb: building package 'sbuild-build-depends-libcoro-perl-dummy' in '/<<BUILDDIR>>/resolver-3vQ5IB/apt_archive/sbuild-build-depends-libcoro-perl-dummy.deb'.
dpkg-scanpackages: warning: Packages in archive but missing from override file:
dpkg-scanpackages: warning: sbuild-build-depends-core-dummy sbuild-build-depends-libcoro-perl-dummy
dpkg-scanpackages: info: Wrote 2 entries to output Packages file.
gpg: using "Sbuild Signer" as default secret key for signing
Ign:1 copy:/<<BUILDDIR>>/resolver-3vQ5IB/apt_archive ./ InRelease
Get:2 copy:/<<BUILDDIR>>/resolver-3vQ5IB/apt_archive ./ Release [963 B]
Get:3 copy:/<<BUILDDIR>>/resolver-3vQ5IB/apt_archive ./ Release.gpg [370 B]
Get:4 copy:/<<BUILDDIR>>/resolver-3vQ5IB/apt_archive ./ Sources [556 B]
Get:5 copy:/<<BUILDDIR>>/resolver-3vQ5IB/apt_archive ./ Packages [631 B]
Fetched 2520 B in 1s (3434 B/s)
Reading package lists...
W: No sandbox user '_apt' on the system, can not drop privileges
Reading package lists...
Install libcoro-perl build dependencies (apt-based resolver)
------------------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
krb5-locales libpam-cap netbase
Use 'apt autoremove' to remove them.
The following additional packages will be installed:
autoconf automake autopoint autotools-dev bsdextrautils bsdutils debhelper
dh-autoreconf dh-strip-nondeterminism dwz file gettext gettext-base
groff-base intltool-debian libanyevent-perl libarchive-zip-perl libblkid1
libcanary-stability-perl libcommon-sense-perl libdebhelper-perl libelf1
libev-perl libevent-perl libfile-stripnondeterminism-perl libguard-perl
libicu71 libmagic-mgc libmagic1 libmount1 libperl-dev libpipeline1
libsmartcols1 libsub-override-perl libtool libuchardet0 libuuid1 libxml2 m4
man-db mount po-debconf util-linux util-linux-extra
Suggested packages:
autoconf-archive gnu-standards autoconf-doc dh-make gettext-doc
libasprintf-dev libgettextpo-dev groff libio-async-perl libjson-perl
| libjson-xs-perl libnet-ssleay-perl libpoe-perl libtask-weaken-perl
cryptsetup-bin libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc
apparmor less www-browser nfs-common libmail-box-perl dosfstools kbd
util-linux-locales
Recommended packages:
curl | wget | lynx libasync-interrupt-perl libarchive-cpio-perl libltdl-dev
uuid-runtime libmail-sendmail-perl
The following NEW packages will be installed:
autoconf automake autopoint autotools-dev bsdextrautils debhelper
dh-autoreconf dh-strip-nondeterminism dwz file gettext gettext-base
groff-base intltool-debian libanyevent-perl libarchive-zip-perl
libcanary-stability-perl libcommon-sense-perl libdebhelper-perl libelf1
libev-perl libevent-perl libfile-stripnondeterminism-perl libguard-perl
libicu71 libmagic-mgc libmagic1 libperl-dev libpipeline1
libsub-override-perl libtool libuchardet0 libxml2 m4 man-db po-debconf
sbuild-build-depends-libcoro-perl-dummy
The following packages will be upgraded:
bsdutils libblkid1 libmount1 libsmartcols1 libuuid1 mount util-linux
util-linux-extra
8 upgraded, 37 newly installed, 0 to remove and 32 not upgraded.
Need to get 21.5 MB of archives.
After this operation, 75.5 MB of additional disk space will be used.
Get:1 copy:/<<BUILDDIR>>/resolver-3vQ5IB/apt_archive ./ sbuild-build-depends-libcoro-perl-dummy 0.invalid.0 [920 B]
Get:2 http://172.17.4.1/private bookworm-staging/main armhf bsdutils armhf 1:2.38.1-1.1 [82.5 kB]
Get:3 http://172.17.4.1/private bookworm-staging/main armhf libsmartcols1 armhf 2.38.1-1.1 [90.6 kB]
Get:4 http://172.17.4.1/private bookworm-staging/main armhf util-linux-extra armhf 2.38.1-1.1 [97.1 kB]
Get:5 http://172.17.4.1/private bookworm-staging/main armhf util-linux armhf 2.38.1-1.1 [1063 kB]
Get:6 http://172.17.4.1/private bookworm-staging/main armhf mount armhf 2.38.1-1.1 [125 kB]
Get:7 http://172.17.4.1/private bookworm-staging/main armhf libblkid1 armhf 2.38.1-1.1 [130 kB]
Get:8 http://172.17.4.1/private bookworm-staging/main armhf libmount1 armhf 2.38.1-1.1 [142 kB]
Get:9 http://172.17.4.1/private bookworm-staging/main armhf libuuid1 armhf 2.38.1-1.1 [25.9 kB]
Get:10 http://172.17.4.1/private bookworm-staging/main armhf libuchardet0 armhf 0.0.7-1 [65.0 kB]
Get:11 http://172.17.4.1/private bookworm-staging/main armhf groff-base armhf 1.22.4-8 [793 kB]
Get:12 http://172.17.4.1/private bookworm-staging/main armhf bsdextrautils armhf 2.38.1-1.1 [78.2 kB]
Get:13 http://172.17.4.1/private bookworm-staging/main armhf libpipeline1 armhf 1.5.6-3 [34.3 kB]
Get:14 http://172.17.4.1/private bookworm-staging/main armhf man-db armhf 2.10.2-3 [1364 kB]
Get:15 http://172.17.4.1/private bookworm-staging/main armhf libmagic-mgc armhf 1:5.41-4 [295 kB]
Get:16 http://172.17.4.1/private bookworm-staging/main armhf libmagic1 armhf 1:5.41-4 [120 kB]
Get:17 http://172.17.4.1/private bookworm-staging/main armhf file armhf 1:5.41-4 [65.8 kB]
Get:18 http://172.17.4.1/private bookworm-staging/main armhf gettext-base armhf 0.21-9 [171 kB]
Get:19 http://172.17.4.1/private bookworm-staging/main armhf m4 armhf 1.4.19-1 [260 kB]
Get:20 http://172.17.4.1/private bookworm-staging/main armhf autoconf all 2.71-2 [343 kB]
Get:21 http://172.17.4.1/private bookworm-staging/main armhf autotools-dev all 20220109.1 [51.6 kB]
Get:22 http://172.17.4.1/private bookworm-staging/main armhf automake all 1:1.16.5-1.3 [823 kB]
Get:23 http://172.17.4.1/private bookworm-staging/main armhf autopoint all 0.21-9 [510 kB]
Get:24 http://172.17.4.1/private bookworm-staging/main armhf libdebhelper-perl all 13.10 [79.8 kB]
Get:25 http://172.17.4.1/private bookworm-staging/main armhf libtool all 2.4.7-4 [526 kB]
Get:26 http://172.17.4.1/private bookworm-staging/main armhf dh-autoreconf all 20 [17.1 kB]
Get:27 http://172.17.4.1/private bookworm-staging/main armhf libarchive-zip-perl all 1.68-1 [104 kB]
Get:28 http://172.17.4.1/private bookworm-staging/main armhf libsub-override-perl all 0.09-4 [9304 B]
Get:29 http://172.17.4.1/private bookworm-staging/main armhf libfile-stripnondeterminism-perl all 1.13.0-1 [26.6 kB]
Get:30 http://172.17.4.1/private bookworm-staging/main armhf dh-strip-nondeterminism all 1.13.0-1 [15.8 kB]
Get:31 http://172.17.4.1/private bookworm-staging/main armhf libelf1 armhf 0.187-2+rpi2 [177 kB]
Get:32 http://172.17.4.1/private bookworm-staging/main armhf dwz armhf 0.14+20220924-2 [93.1 kB]
Get:33 http://172.17.4.1/private bookworm-staging/main armhf libicu71 armhf 71.1-3 [8855 kB]
Get:34 http://172.17.4.1/private bookworm-staging/main armhf libxml2 armhf 2.9.14+dfsg-1 [591 kB]
Get:35 http://172.17.4.1/private bookworm-staging/main armhf gettext armhf 0.21-9 [1220 kB]
Get:36 http://172.17.4.1/private bookworm-staging/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB]
Get:37 http://172.17.4.1/private bookworm-staging/main armhf po-debconf all 1.0.21+nmu1 [248 kB]
Get:38 http://172.17.4.1/private bookworm-staging/main armhf debhelper all 13.10 [940 kB]
Get:39 http://172.17.4.1/private bookworm-staging/main armhf libanyevent-perl armhf 7.170-2+b2 [399 kB]
Get:40 http://172.17.4.1/private bookworm-staging/main armhf libcanary-stability-perl armhf 2006-4 [9348 B]
Get:41 http://172.17.4.1/private bookworm-staging/main armhf libcommon-sense-perl armhf 3.75-2+b1 [24.8 kB]
Get:42 http://172.17.4.1/private bookworm-staging/main armhf libev-perl armhf 4.33-1+b2 [254 kB]
Get:43 http://172.17.4.1/private bookworm-staging/main armhf libevent-perl armhf 1.28-1+b1 [260 kB]
Get:44 http://172.17.4.1/private bookworm-staging/main armhf libguard-perl armhf 1.023-2 [15.1 kB]
Get:45 http://172.17.4.1/private bookworm-staging/main armhf libperl-dev armhf 5.34.0-5 [920 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 21.5 MB in 4s (5297 kB/s)
(Reading database ... 12808 files and directories currently installed.)
Preparing to unpack .../bsdutils_1%3a2.38.1-1.1_armhf.deb ...
Unpacking bsdutils (1:2.38.1-1.1) over (1:2.38.1-1) ...
Setting up bsdutils (1:2.38.1-1.1) ...
(Reading database ... 12808 files and directories currently installed.)
Preparing to unpack .../libsmartcols1_2.38.1-1.1_armhf.deb ...
Unpacking libsmartcols1:armhf (2.38.1-1.1) over (2.38.1-1) ...
Setting up libsmartcols1:armhf (2.38.1-1.1) ...
(Reading database ... 12808 files and directories currently installed.)
Preparing to unpack .../util-linux-extra_2.38.1-1.1_armhf.deb ...
Unpacking util-linux-extra (2.38.1-1.1) over (2.38.1-1) ...
Setting up util-linux-extra (2.38.1-1.1) ...
(Reading database ... 12808 files and directories currently installed.)
Preparing to unpack .../util-linux_2.38.1-1.1_armhf.deb ...
Unpacking util-linux (2.38.1-1.1) over (2.38.1-1) ...
Setting up util-linux (2.38.1-1.1) ...
(Reading database ... 12810 files and directories currently installed.)
Preparing to unpack .../mount_2.38.1-1.1_armhf.deb ...
Unpacking mount (2.38.1-1.1) over (2.38.1-1) ...
Preparing to unpack .../libblkid1_2.38.1-1.1_armhf.deb ...
Unpacking libblkid1:armhf (2.38.1-1.1) over (2.38.1-1) ...
Setting up libblkid1:armhf (2.38.1-1.1) ...
(Reading database ... 12810 files and directories currently installed.)
Preparing to unpack .../libmount1_2.38.1-1.1_armhf.deb ...
Unpacking libmount1:armhf (2.38.1-1.1) over (2.38.1-1) ...
Setting up libmount1:armhf (2.38.1-1.1) ...
(Reading database ... 12810 files and directories currently installed.)
Preparing to unpack .../libuuid1_2.38.1-1.1_armhf.deb ...
Unpacking libuuid1:armhf (2.38.1-1.1) over (2.38.1-1) ...
Setting up libuuid1:armhf (2.38.1-1.1) ...
Selecting previously unselected package libuchardet0:armhf.
(Reading database ... 12810 files and directories currently installed.)
Preparing to unpack .../00-libuchardet0_0.0.7-1_armhf.deb ...
Unpacking libuchardet0:armhf (0.0.7-1) ...
Selecting previously unselected package groff-base.
Preparing to unpack .../01-groff-base_1.22.4-8_armhf.deb ...
Unpacking groff-base (1.22.4-8) ...
Selecting previously unselected package bsdextrautils.
Preparing to unpack .../02-bsdextrautils_2.38.1-1.1_armhf.deb ...
Unpacking bsdextrautils (2.38.1-1.1) ...
Selecting previously unselected package libpipeline1:armhf.
Preparing to unpack .../03-libpipeline1_1.5.6-3_armhf.deb ...
Unpacking libpipeline1:armhf (1.5.6-3) ...
Selecting previously unselected package man-db.
Preparing to unpack .../04-man-db_2.10.2-3_armhf.deb ...
Unpacking man-db (2.10.2-3) ...
Selecting previously unselected package libmagic-mgc.
Preparing to unpack .../05-libmagic-mgc_1%3a5.41-4_armhf.deb ...
Unpacking libmagic-mgc (1:5.41-4) ...
Selecting previously unselected package libmagic1:armhf.
Preparing to unpack .../06-libmagic1_1%3a5.41-4_armhf.deb ...
Unpacking libmagic1:armhf (1:5.41-4) ...
Selecting previously unselected package file.
Preparing to unpack .../07-file_1%3a5.41-4_armhf.deb ...
Unpacking file (1:5.41-4) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../08-gettext-base_0.21-9_armhf.deb ...
Unpacking gettext-base (0.21-9) ...
Selecting previously unselected package m4.
Preparing to unpack .../09-m4_1.4.19-1_armhf.deb ...
Unpacking m4 (1.4.19-1) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../10-autoconf_2.71-2_all.deb ...
Unpacking autoconf (2.71-2) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../11-autotools-dev_20220109.1_all.deb ...
Unpacking autotools-dev (20220109.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../12-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../13-autopoint_0.21-9_all.deb ...
Unpacking autopoint (0.21-9) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../14-libdebhelper-perl_13.10_all.deb ...
Unpacking libdebhelper-perl (13.10) ...
Selecting previously unselected package libtool.
Preparing to unpack .../15-libtool_2.4.7-4_all.deb ...
Unpacking libtool (2.4.7-4) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../16-dh-autoreconf_20_all.deb ...
Unpacking dh-autoreconf (20) ...
Selecting previously unselected package libarchive-zip-perl.
Preparing to unpack .../17-libarchive-zip-perl_1.68-1_all.deb ...
Unpacking libarchive-zip-perl (1.68-1) ...
Selecting previously unselected package libsub-override-perl.
Preparing to unpack .../18-libsub-override-perl_0.09-4_all.deb ...
Unpacking libsub-override-perl (0.09-4) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.13.0-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.13.0-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../20-dh-strip-nondeterminism_1.13.0-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.13.0-1) ...
Selecting previously unselected package libelf1:armhf.
Preparing to unpack .../21-libelf1_0.187-2+rpi2_armhf.deb ...
Unpacking libelf1:armhf (0.187-2+rpi2) ...
Selecting previously unselected package dwz.
Preparing to unpack .../22-dwz_0.14+20220924-2_armhf.deb ...
Unpacking dwz (0.14+20220924-2) ...
Selecting previously unselected package libicu71:armhf.
Preparing to unpack .../23-libicu71_71.1-3_armhf.deb ...
Unpacking libicu71:armhf (71.1-3) ...
Selecting previously unselected package libxml2:armhf.
Preparing to unpack .../24-libxml2_2.9.14+dfsg-1_armhf.deb ...
Unpacking libxml2:armhf (2.9.14+dfsg-1) ...
Selecting previously unselected package gettext.
Preparing to unpack .../25-gettext_0.21-9_armhf.deb ...
Unpacking gettext (0.21-9) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../26-intltool-debian_0.35.0+20060710.5_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.5) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ...
Unpacking po-debconf (1.0.21+nmu1) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../28-debhelper_13.10_all.deb ...
Unpacking debhelper (13.10) ...
Selecting previously unselected package libanyevent-perl.
Preparing to unpack .../29-libanyevent-perl_7.170-2+b2_armhf.deb ...
Unpacking libanyevent-perl (7.170-2+b2) ...
Selecting previously unselected package libcanary-stability-perl:armhf.
Preparing to unpack .../30-libcanary-stability-perl_2006-4_armhf.deb ...
Unpacking libcanary-stability-perl:armhf (2006-4) ...
Selecting previously unselected package libcommon-sense-perl:armhf.
Preparing to unpack .../31-libcommon-sense-perl_3.75-2+b1_armhf.deb ...
Unpacking libcommon-sense-perl:armhf (3.75-2+b1) ...
Selecting previously unselected package libev-perl.
Preparing to unpack .../32-libev-perl_4.33-1+b2_armhf.deb ...
Unpacking libev-perl (4.33-1+b2) ...
Selecting previously unselected package libevent-perl.
Preparing to unpack .../33-libevent-perl_1.28-1+b1_armhf.deb ...
Unpacking libevent-perl (1.28-1+b1) ...
Selecting previously unselected package libguard-perl.
Preparing to unpack .../34-libguard-perl_1.023-2_armhf.deb ...
Unpacking libguard-perl (1.023-2) ...
Selecting previously unselected package libperl-dev:armhf.
Preparing to unpack .../35-libperl-dev_5.34.0-5_armhf.deb ...
Unpacking libperl-dev:armhf (5.34.0-5) ...
Selecting previously unselected package sbuild-build-depends-libcoro-perl-dummy.
Preparing to unpack .../36-sbuild-build-depends-libcoro-perl-dummy_0.invalid.0_armhf.deb ...
Unpacking sbuild-build-depends-libcoro-perl-dummy (0.invalid.0) ...
Setting up libanyevent-perl (7.170-2+b2) ...
Setting up libpipeline1:armhf (1.5.6-3) ...
Setting up libicu71:armhf (71.1-3) ...
Setting up bsdextrautils (2.38.1-1.1) ...
Setting up libevent-perl (1.28-1+b1) ...
Setting up libmagic-mgc (1:5.41-4) ...
Setting up libarchive-zip-perl (1.68-1) ...
Setting up libdebhelper-perl (13.10) ...
Setting up libmagic1:armhf (1:5.41-4) ...
Setting up libcommon-sense-perl:armhf (3.75-2+b1) ...
Setting up gettext-base (0.21-9) ...
Setting up m4 (1.4.19-1) ...
Setting up libperl-dev:armhf (5.34.0-5) ...
Setting up file (1:5.41-4) ...
Setting up libcanary-stability-perl:armhf (2006-4) ...
Setting up autotools-dev (20220109.1) ...
Setting up autopoint (0.21-9) ...
Setting up autoconf (2.71-2) ...
Setting up mount (2.38.1-1.1) ...
Setting up libuchardet0:armhf (0.0.7-1) ...
Setting up libsub-override-perl (0.09-4) ...
Setting up libev-perl (4.33-1+b2) ...
Setting up libelf1:armhf (0.187-2+rpi2) ...
Setting up libguard-perl (1.023-2) ...
Setting up libxml2:armhf (2.9.14+dfsg-1) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
Setting up libfile-stripnondeterminism-perl (1.13.0-1) ...
Setting up gettext (0.21-9) ...
Setting up libtool (2.4.7-4) ...
Setting up intltool-debian (0.35.0+20060710.5) ...
Setting up dh-autoreconf (20) ...
Setting up dh-strip-nondeterminism (1.13.0-1) ...
Setting up dwz (0.14+20220924-2) ...
Setting up groff-base (1.22.4-8) ...
Setting up po-debconf (1.0.21+nmu1) ...
Setting up man-db (2.10.2-3) ...
Not building database; man-db/auto-update is not 'true'.
Setting up debhelper (13.10) ...
Setting up sbuild-build-depends-libcoro-perl-dummy (0.invalid.0) ...
Processing triggers for libc-bin (2.35-1+rpi1) ...
W: No sandbox user '_apt' on the system, can not drop privileges
+------------------------------------------------------------------------------+
| Build environment |
+------------------------------------------------------------------------------+
Kernel: Linux 4.9.0-0.bpo.6-armmp armhf (armv7l)
Toolchain package versions: binutils_2.39-3+rpi1 dpkg-dev_1.21.9+rpi1 g++-12_12.2.0-3+rpi1 gcc-12_12.2.0-3+rpi1 libc6-dev_2.35-1+rpi1 libstdc++-12-dev_12.2.0-3+rpi1 libstdc++6_12.2.0-3+rpi1 linux-libc-dev_5.19.6-1+rpi1
Package versions: adduser_3.129 apt_2.5.2 autoconf_2.71-2 automake_1:1.16.5-1.3 autopoint_0.21-9 autotools-dev_20220109.1 base-files_12.2+rpi1 base-passwd_3.6.1 bash_5.2~rc2-2 binutils_2.39-3+rpi1 binutils-arm-linux-gnueabihf_2.39-3+rpi1 binutils-common_2.39-3+rpi1 bsdextrautils_2.38.1-1.1 bsdutils_1:2.38.1-1.1 build-essential_12.9 bzip2_1.0.8-5+b2 coreutils_9.1-1 cpp_4:12.2.0-1+rpi1 cpp-12_12.2.0-3+rpi1 dash_0.5.11+git20210903+057cd650a4ed-9 debconf_1.5.79 debhelper_13.10 debianutils_5.7-0.3 dh-autoreconf_20 dh-strip-nondeterminism_1.13.0-1 diffutils_1:3.8-1 dirmngr_2.2.39-1 dpkg_1.21.9+rpi1 dpkg-dev_1.21.9+rpi1 dwz_0.14+20220924-2 e2fsprogs_1.46.6~rc1-1 fakeroot_1.29-1 file_1:5.41-4 findutils_4.9.0-3 g++_4:12.2.0-1+rpi1 g++-12_12.2.0-3+rpi1 gcc_4:12.2.0-1+rpi1 gcc-12_12.2.0-3+rpi1 gcc-12-base_12.2.0-3+rpi1 gcc-7-base_7.5.0-6+rpi1+b2 gcc-8-base_8.4.0-7+rpi1 gcc-9-base_9.4.0-2+rpi1 gettext_0.21-9 gettext-base_0.21-9 gnupg_2.2.39-1 gnupg-l10n_2.2.39-1 gnupg-utils_2.2.39-1 gpg_2.2.39-1 gpg-agent_2.2.39-1 gpg-wks-client_2.2.39-1 gpg-wks-server_2.2.39-1 gpgconf_2.2.39-1 gpgsm_2.2.39-1 gpgv_2.2.39-1 grep_3.7-1 groff-base_1.22.4-8 gzip_1.12-1 hostname_3.23 init-system-helpers_1.64 intltool-debian_0.35.0+20060710.5 iputils-ping_3:20211215-1 krb5-locales_1.20-1 libacl1_2.3.1-1 libanyevent-perl_7.170-2+b2 libapt-pkg6.0_2.5.2 libarchive-zip-perl_1.68-1 libasan8_12.2.0-3+rpi1 libassuan0_2.5.5-4 libatomic1_12.2.0-3+rpi1 libattr1_1:2.5.1-1 libaudit-common_1:3.0.7-1.1 libaudit1_1:3.0.7-1.1 libbinutils_2.39-3+rpi1 libblkid1_2.38.1-1.1 libbz2-1.0_1.0.8-5+b2 libc-bin_2.35-1+rpi1 libc-dev-bin_2.35-1+rpi1 libc6_2.35-1+rpi1 libc6-dev_2.35-1+rpi1 libcanary-stability-perl_2006-4 libcap-ng0_0.8.3-1 libcap2_1:2.44-1 libcap2-bin_1:2.44-1 libcc1-0_12.2.0-3+rpi1 libcom-err2_1.46.6~rc1-1 libcommon-sense-perl_3.75-2+b1 libcrypt-dev_1:4.4.28-2 libcrypt1_1:4.4.28-2 libctf-nobfd0_2.39-3+rpi1 libctf0_2.39-3+rpi1 libdb5.3_5.3.28+dfsg1-0.10 libdebconfclient0_0.264 libdebhelper-perl_13.10 libdpkg-perl_1.21.9+rpi1 libelf1_0.187-2+rpi2 libev-perl_4.33-1+b2 libevent-perl_1.28-1+b1 libext2fs2_1.46.6~rc1-1 libfakeroot_1.29-1 libffi8_3.4.2-4 libfile-stripnondeterminism-perl_1.13.0-1 libgcc-12-dev_12.2.0-3+rpi1 libgcc-s1_12.2.0-3+rpi1 libgcrypt20_1.10.1-2+b2 libgdbm-compat4_1.23-2 libgdbm6_1.23-2 libgmp10_2:6.2.1+dfsg1-1 libgnutls30_3.7.7-2 libgomp1_12.2.0-3+rpi1 libgpg-error0_1.45-2 libgssapi-krb5-2_1.20-1 libguard-perl_1.023-2 libhogweed6_3.8.1-2 libicu71_71.1-3 libidn2-0_2.3.3-1 libisl23_0.25-1 libk5crypto3_1.20-1 libkeyutils1_1.6.3-1 libkrb5-3_1.20-1 libkrb5support0_1.20-1 libksba8_1.6.0-3 libldap-2.5-0_2.5.13+dfsg-1 liblz4-1_1.9.4-1+rpi1 liblzma5_5.2.5-2.1 libmagic-mgc_1:5.41-4 libmagic1_1:5.41-4 libmount1_2.38.1-1.1 libmpc3_1.2.1-2 libmpfr6_4.1.0-3 libncursesw6_6.3+20220423-2 libnettle8_3.8.1-2 libnpth0_1.6-3 libnsl-dev_1.3.0-2 libnsl2_1.3.0-2 libp11-kit0_0.24.1-1 libpam-cap_1:2.44-1 libpam-modules_1.5.2-2 libpam-modules-bin_1.5.2-2 libpam-runtime_1.5.2-2 libpam0g_1.5.2-2 libpcre2-8-0_10.40-1+b2 libpcre3_2:8.39-14 libperl-dev_5.34.0-5 libperl5.34_5.34.0-5 libpipeline1_1.5.6-3 libreadline8_8.2~rc2-2 libsasl2-2_2.1.28+dfsg-8 libsasl2-modules-db_2.1.28+dfsg-8 libseccomp2_2.5.4-1+rpi1 libselinux1_3.4-1 libsemanage-common_3.4-1 libsemanage2_3.4-1 libsepol1_3.1-1 libsepol2_3.4-2 libsmartcols1_2.38.1-1.1 libsqlite3-0_3.39.3-1 libss2_1.46.6~rc1-1 libssl1.1_1.1.1o-1 libssl3_3.0.5-2 libstdc++-12-dev_12.2.0-3+rpi1 libstdc++6_12.2.0-3+rpi1 libsub-override-perl_0.09-4 libsystemd0_251.4-3+rpi1 libtasn1-6_4.19.0-2 libtinfo6_6.3+20220423-2 libtirpc-common_1.3.3+ds-1 libtirpc-dev_1.3.3+ds-1 libtirpc3_1.3.3+ds-1 libtool_2.4.7-4 libubsan1_12.2.0-3+rpi1 libuchardet0_0.0.7-1 libudev1_251.4-3+rpi1 libunistring2_1.0-1 libuuid1_2.38.1-1.1 libxml2_2.9.14+dfsg-1 libxxhash0_0.8.1-1 libzstd1_1.5.2+dfsg-1 linux-libc-dev_5.19.6-1+rpi1 login_1:4.11.1+dfsg1-2 logsave_1.46.6~rc1-1 lsb-base_11.4+rpi1 m4_1.4.19-1 make_4.3-4.1 man-db_2.10.2-3 mawk_1.3.4.20200120-3.1 mount_2.38.1-1.1 nano_6.4-1 ncurses-base_6.3+20220423-2 ncurses-bin_6.3+20220423-2 netbase_6.3 passwd_1:4.11.1+dfsg1-2 patch_2.7.6-7 perl_5.34.0-5 perl-base_5.34.0-5 perl-modules-5.34_5.34.0-5 pinentry-curses_1.2.0-2 po-debconf_1.0.21+nmu1 raspbian-archive-keyring_20120528.2 readline-common_8.2~rc2-2 rpcsvc-proto_1.4.2-4 sbuild-build-depends-core-dummy_0.invalid.0 sbuild-build-depends-libcoro-perl-dummy_0.invalid.0 sed_4.8-1 sensible-utils_0.0.17 sgml-base_1.30 sysvinit-utils_3.05-6 tar_1.34+dfsg-1 tzdata_2022d-1 util-linux_2.38.1-1.1 util-linux-extra_2.38.1-1.1 xz-utils_5.2.5-2.1 zlib1g_1:1.2.11.dfsg-4.1
+------------------------------------------------------------------------------+
| Build |
+------------------------------------------------------------------------------+
Unpack source
-------------
gpgv: unknown type of key resource 'trustedkeys.kbx'
gpgv: keyblock resource '/tmp/dpkg-verify-sig.rr3xbTx9/trustedkeys.kbx': General error
gpgv: Signature made Thu Oct 13 15:30:12 2022 UTC
gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8
gpgv: Can't check signature: No public key
dpkg-source: warning: cannot verify signature ./libcoro-perl_6.570-3.dsc
dpkg-source: info: extracting libcoro-perl in /<<PKGBUILDDIR>>
dpkg-source: info: unpacking libcoro-perl_6.570.orig.tar.gz
dpkg-source: info: unpacking libcoro-perl_6.570-3.debian.tar.xz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: applying whatis.patch
dpkg-source: info: applying spelling.patch
Check disc space
----------------
Sufficient free space for build
User Environment
----------------
APT_CONFIG=/var/lib/sbuild/apt.conf
DEB_BUILD_OPTIONS=parallel=4
HOME=/sbuild-nonexistent
LC_ALL=POSIX
LOGNAME=buildd
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
SCHROOT_ALIAS_NAME=bookworm-staging-armhf-sbuild
SCHROOT_CHROOT_NAME=bookworm-staging-armhf-sbuild
SCHROOT_COMMAND=env
SCHROOT_GID=109
SCHROOT_GROUP=buildd
SCHROOT_SESSION_ID=bookworm-staging-armhf-sbuild-b62e22cb-9526-4f77-9d0a-e5488f225a62
SCHROOT_UID=104
SCHROOT_USER=buildd
SHELL=/bin/sh
TERM=linux
USER=buildd
dpkg-buildpackage
-----------------
dpkg-buildpackage: info: source package libcoro-perl
dpkg-buildpackage: info: source version 6.570-3
dpkg-buildpackage: info: source distribution unstable
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture armhf
debian/rules clean
dh clean
dh_clean
debian/rules binary-arch
dh binary-arch
dh_update_autotools_config -a
dh_autoreconf -a
dh_auto_configure -a
/usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=arm-linux-gnueabihf-gcc -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now"
***
*** The stability canary says: (nothing, it was driven away by harsh weather)
***
*** It seems you are running perl version 5.034000, likely the "official" or
*** "standard" version. While there is nothing wrong with doing that,
*** standard perl versions 5.022 and up are not supported by Coro.
*** While this might be fatal, it might also be all right - if you run into
*** problems, you might want to downgrade your perl or switch to the
*** stability branch.
***
*** If everything works fine, you can ignore this message.
***
*** Stability canary mini-FAQ:
***
*** Do I need to do anything?
*** With luck, no. While some distributions are known to fail
*** already, most should probably work. This message is here
*** to alert you that your perl is not supported by Coro,
*** and if things go wrong, you either need to downgrade, or
*** sidegrade to the stability variant of your perl version,
*** or simply live with the consequences.
***
*** What is this canary thing?
*** It's purpose is to check support status of Coro with
*** respect to your perl version.
***
*** What is this "stability branch"?
*** It's a branch or fork of the official perl, by schmorp, to
*** improve stability and compatibility with existing modules.
***
*** How can I skip this prompt on automated installs?
*** Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment.
*** More info is in the Canary::Stability manpage.
***
*** Long version of this FAQ: http://stableperl.schmorp.de/faq.html
*** Stability Branch homepage: http://stableperl.schmorp.de/
***
Continue anyways? [y] y
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Event version 1.28 found, building Event support.
EV version 4.33 found, building EV support.
Checking if your kit is complete...
Looks good
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro has a number of configuration options. Due to its maturity, the
defaults that Coro chooses are usually fine, so you can decide to skip
these questions. Only if something went wrong you should select 'n'
here and manually configure Coro, and, of course, report this to the
maintainer :)
Skip further questions and use defaults (y/n)? [y] y
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can use a number of methods to implement coroutines at the C
level. The default chosen is based on your current confguration and is
correct in most cases, but you still can chose between these alternatives:
u The unix 'ucontext.h' functions are relatively new and not implemented
or well-tested in older unices. They allow very fast coroutine creation
and reasonably fast switching. They are, however, usually slower than
the other alternatives due to an extra syscall done by swapcontext. And
while nominally most portable (it's the only POSIX-standardised
interface for coroutines), ucontext functions are, as usual, broken on
most/all BSDs.
s If the ucontext functions are not working or you don't want
to use them for other reasons you can try a workaround using
setjmp/longjmp/sigaltstack (also standard unix functions). Coroutine
creation is rather slow, but switching is very fast (often much faster
than with the ucontext functions). Unfortunately, glibc-2.1 and
below don't even feature a working sigaltstack. You cannot use this
implementation if some other code uses SIGUSR2 or you plan to create
coroutines from an alternative signal stack, as both are being used for
coroutine creation.
a Handcoded assembly. This is the fastest and most compatible method,
with the least side effects, if it works, that is. It has been tested
on GNU/Linux x86 and x86_64 systems and should work on all x86/x86_64
systems using the SVR ELF ABI (it is also reported to be working on
Strawberry Perl for Windows using MinGW). This is the recommended
method on supported platforms. When it doesn't work, use another
method, such as (s)etjmp/longjmp.
l GNU/Linux. Very old GNU/Linux systems (glibc-2.1 and below) need
this hack. Since it is very linux-specific it is also quite fast and
recommended even for newer versions; when it works, that is (currently
x86 and a few others only. If it compiles, it's usually ok). Newer
glibc versions (>= 2.5) stop working with this implementation however.
i IRIX. For some reason, SGI really does not like to follow POSIX (does
that surprise you?), so this workaround might be needed (it's fast),
although [s] and [u] should also work now.
w Microsoft Windows. Try this on Microsoft Windows when using Cygwin or
the MSVC compilers (e.g. ActiveState Perl, but see "a" for Strawberry
Perl), although, as there is no standard on how to do this under
windows, different environments might work differently. Doh.
f Microsoft Windows. Try this on Microsoft Windows if w fails. It is slower
and uses a lot more memory, but should be working all the time.
p Use pthread API. Try to avoid this option, it was only created to
make a point about the programming language shootout. It is unlikely
to work with perls that have windows process emulation enabled ("perl
threads"). It is also likely the slowest method of implementing
coroutines. It might work fine as a last resort, however, as the
pthread API is slightly better tested than ucontext functions for
example. Of course, not on BSDs, who usually have very broken pthread
implementations.
Coro tries hard to come up with a suitable default for most systems,
so pressing return at the prompt usually does the right thing. If you
experience problems (e.g. make test fails) then you should experiment with
this setting.
Use which implementation,
<s>etjmp, <u>ctx, <a>sm, <i>rix, <l>inux, <p>threads, <w>indows, <f>iber? [s] s
Using setjmp/longjmp/sigaltstack implementation
Trying to detect stack growth direction (for TEST_sigaltstack)
You might see some warnings, this should not concern you.
libcoro/conftest.c: In function 'main':
libcoro/conftest.c:98:28: error: storage size of 'ss' isn't known
98 | struct sigaltstack ss;
| ^~
*****************************************************************************
If the testsuite fails PLEASE provide the following information
to Marc Lehmann <schmorp@schmorp.de>: operating system name, version,
architecture name and this string '|'. Thanks a lot!
*****************************************************************************
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Per-context stack size factor: Depending on your settings, Coro tries to
share the C stacks is creates as much as possible, but sometimes it needs
to allocate a new one. This setting controls the maximum size that gets
allocated, and should not be set too high, as memory and address space
still is wasted even if it's not fully used. The value entered will be
multiplied by sizeof(void *), which is usually 4 on 32-bit systems, and 8
on 64-bit systems.
A setting of 16384 (the default) therefore corresponds to a 64k..128k
stack, which usually is ample space (you might even want to try 8192 or
lower if your program creates many coroutines).
On systems supporting mmap and dynamic memory management, the actual
memory usually gets allocated on demand, but with many large stacks you
can still run out of address space on your typical 32 bit platform (not to
forget the pagetables).
Some perls (mostly threaded ones and perl compiled under linux 2.6) and
some programs (inefficient regexes can use a lot of stack space) may
need much, much more: If Coro segfaults with weird backtraces (e.g. in a
function prologue) or in t/10_bugs.t, you might want to increase this to
65536 or more.
The default should be fine, and can be changed at runtime with
Coro::State::cctx_stacksize.
C stack size factor? [16384] 16384
using a stacksize of 16384 * sizeof(void*)
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can optionally put a guard area before each stack segment: When the
stack is too small and the access is not too far outside the stack (i.e.
within the guard area), then the program will safely segfault instead of
running into other data. The cost is some additional overhead with is
usually negligible, and extra use of address space.
The guard area size currently needs to be specified in pages (typical
pagesizes are 4k and 8k). The guard area is only enabled on a few
hardcoded architectures and is ignored on others. The actual preprocessor
expression disables this feature if:
!__i386 && !__x86_64 && !__powerpc && !__m68k
&& !__alpha && !__mips && !__sparc64
The default, as usual, should be just fine.
Number of guard pages (0 disables)? [4] 4
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can tell valgrind about its stacks and so reduce spurious warnings
where valgrind would otherwise complain about possible stack switches.
Enabling this does not incur noticable runtime or memory overhead, but it
requires that you have the <valgrind/valgrind.h> header file available.
Valgrind support is completely optional, so disabling it is the safe
choice.
Enable valgrind support (y/n)? [n] n
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can use (or even trick) some perl functions into doing what it needs
instead of relying on (some) of its own functions. This might increase
chances that it compiles and works, but it could just as well result in
memory leaks, crashes or silent data corruption. It certainly does result
in slightly slower speed and higher memory consumption, though, so YOU
SHOULD ENABLE THIS OPTION ONLY AS A LAST RESORT.
Prefer perl functions over coro functions (y/n)? [n] n
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can use a simple JIT compiler to compile a part of the thread switch
function at runtime. On perls with windows process emulation (most!),
this results in a 50% speed improvement. On sane perls, the gain is much
less, usually around 5%. If you enable this option, then the JIT will
be enabled, on compatible operating systems and CPUs (currently only
x86/amd64 on certain unix clones). Otherwise, it will be disabled. It
should be safe to leave on - this setting is only here so you can switch
it off in case of problems.
Note that some broken kernels (often calling themselves "hardened") break
all JIT generation by manipulating some system calls. If you get bus
errors or segmentation faults immediately when the JIT is enabled but not
without, then note that disabling the JIT only fixes some symptoms, not
the underlying problem, and you might run into other problems later.
Try to use the JIT compiler, if available? [y] y
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro has experimental support for cloning states. This can be used
to implement a scheme-like call/cc. However, this doesn't add to the
expressiveness in general, and is likely perl-version specific (and perl
5.12 deliberately removed support for it). As such, it is disabled by
default. Enable it when you want to play around with it, but note that it
isn't supported, and unlikely ever will be. It exists mainly to prove that
it could be done - if only it were useful for something.
Implement Coro::State->clone method (y/n)? [n] n
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Writing MYMETA.yml and MYMETA.json
Writing MYMETA.yml and MYMETA.json
Writing MYMETA.yml and MYMETA.json
Generating a Unix-style Makefile
Writing Makefile for Coro
Writing MYMETA.yml and MYMETA.json
dh_auto_build -a
make -j4
make[1]: Entering directory '/<<PKGBUILDDIR>>'
make[2]: Entering directory '/<<PKGBUILDDIR>>/Coro'
Running Mkbootstrap for State ()
"/usr/bin/perl" "/usr/share/perl/5.34.0/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.34/ExtUtils/typemap' -typemap '/<<PKGBUILDDIR>>/Coro/typemap' State.xs > State.xsc
chmod 644 "State.bs"
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644
cp Coro/Semaphore.pm blib/lib/Coro/Semaphore.pm
cp Coro/MakeMaker.pm blib/lib/Coro/MakeMaker.pm
cp Coro/jit-amd64-unix.pl blib/lib/Coro/jit-amd64-unix.pl
cp Coro/AIO.pm blib/lib/Coro/AIO.pm
cp Coro/State.pm blib/lib/Coro/State.pm
cp Coro/Channel.pm blib/lib/Coro/Channel.pm
cp Coro/RWLock.pm blib/lib/Coro/RWLock.pm
cp Coro.pm blib/lib/Coro.pm
cp Coro/Util.pm blib/lib/Coro/Util.pm
cp Coro/Storable.pm blib/lib/Coro/Storable.pm
cp Coro/Signal.pm blib/lib/Coro/Signal.pm
cp Coro/Timer.pm blib/lib/Coro/Timer.pm
cp Coro/Handle.pm blib/lib/Coro/Handle.pm
cp Coro/Socket.pm blib/lib/Coro/Socket.pm
cp Coro/Specific.pm blib/lib/Coro/Specific.pm
cp Coro/Debug.pm blib/lib/Coro/Debug.pm
cp Coro/AnyEvent.pm blib/lib/Coro/AnyEvent.pm
cp Coro/SemaphoreSet.pm blib/lib/Coro/SemaphoreSet.pm
cp Coro/BDB.pm blib/lib/Coro/BDB.pm
cp Coro/Select.pm blib/lib/Coro/Select.pm
cp Coro/CoroAPI.h blib/lib/Coro/CoroAPI.h
cp Coro/jit-x86-unix.pl blib/lib/Coro/jit-x86-unix.pl
cp Coro/LWP.pm blib/lib/Coro/LWP.pm
Skip ../blib/lib/Coro/Timer.pm (unchanged)
Skip ../blib/lib/Coro/Util.pm (unchanged)
Skip ../blib/lib/Coro/State.pm (unchanged)
cp Intro.pod ../blib/lib/Coro/Intro.pod
Skip ../blib/lib/Coro/Debug.pm (unchanged)
Skip ../blib/lib/Coro/jit-x86-unix.pl (unchanged)
Skip ../blib/lib/Coro/Storable.pm (unchanged)
Skip ../blib/lib/Coro/AnyEvent.pm (unchanged)
Skip ../blib/lib/Coro/MakeMaker.pm (unchanged)
Skip ../blib/lib/Coro/SemaphoreSet.pm (unchanged)
Skip ../blib/lib/Coro/Semaphore.pm (unchanged)
Skip ../blib/lib/Coro/LWP.pm (unchanged)
Skip ../blib/lib/Coro/Signal.pm (unchanged)
Skip ../blib/lib/Coro/jit-amd64-unix.pl (unchanged)
Skip ../blib/lib/Coro/Specific.pm (unchanged)
Skip ../blib/lib/Coro/AIO.pm (unchanged)
Skip ../blib/lib/Coro/Handle.pm (unchanged)
Skip ../blib/lib/Coro/Socket.pm (unchanged)
Skip ../blib/lib/Coro/BDB.pm (unchanged)
Skip ../blib/lib/Coro/RWLock.pm (unchanged)
Skip ../blib/lib/Coro/Channel.pm (unchanged)
Skip ../blib/lib/Coro/Select.pm (unchanged)
Warning: Aliases 'is_zombie' and 'is_destroyed' have identical values in State.xs, line 3897
mv State.xsc State.c
arm-linux-gnueabihf-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.57\" -DXS_VERSION=\"6.57\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.34/CORE" -D_FORTIFY_SOURCE=0 -DCORO_SJLJ -DCORO_STACKSIZE=16384 -DCORO_GUARDPAGES=4 -DCORO_JIT=1 State.c
<command-line>: warning: "_FORTIFY_SOURCE" redefined
<command-line>: note: this is the location of the previous definition
rm -f ../blib/arch/auto/Coro/State/State.so
arm-linux-gnueabihf-gcc -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong State.o -o ../blib/arch/auto/Coro/State/State.so \
\
chmod 755 ../blib/arch/auto/Coro/State/State.so
Manifying 20 pod documents
make[2]: Leaving directory '/<<PKGBUILDDIR>>/Coro'
make[2]: Entering directory '/<<PKGBUILDDIR>>/Event'
Running Mkbootstrap for Event ()
chmod 644 "Event.bs"
"/usr/bin/perl" "/usr/share/perl/5.34.0/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.34/ExtUtils/typemap' Event.xs > Event.xsc
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644
cp Event.pm ../blib/lib/Coro/Event.pm
mv Event.xsc Event.c
arm-linux-gnueabihf-gcc -c -I/usr/lib/arm-linux-gnueabihf/perl5/5.34/Event -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.57\" -DXS_VERSION=\"6.57\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.34/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 Event.c
In file included from Event.xs:8:
Event.xs: In function 'boot_Coro__Event':
/usr/lib/arm-linux-gnueabihf/perl5/5.34/Event/EventAPI.h:252:15: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
252 | GEventAPI = (struct EventAPI*) SvIV(sv); \
| ^
Event.xs:82:9: note: in expansion of macro 'I_EVENT_API'
82 | I_EVENT_API ("Coro::Event");
| ^~~~~~~~~~~
/usr/lib/arm-linux-gnueabihf/perl5/5.34/Event/EventAPI.h:254:11: warning: format '%d' expects argument of type 'int', but argument 2 has type 'I32' {aka 'long int'} [-Wformat=]
254 | croak("Event::API version mismatch (%d != %d) -- please recompile %s", \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
255 | GEventAPI->Ver, EventAPI_VERSION, YourName); \
| ~~~~~~~~~~~~~~
| |
| I32 {aka long int}
/usr/lib/arm-linux-gnueabihf/perl5/5.34/Event/EventAPI.h:254:11: note: in definition of macro 'I_EVENT_API'
254 | croak("Event::API version mismatch (%d != %d) -- please recompile %s", \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from Event.xs:9:
../Coro/CoroAPI.h:122:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
122 | GCoroAPI = (struct CoroAPI*) SvIV (sv); \
| ^
Event.xs:83:9: note: in expansion of macro 'I_CORO_API'
83 | I_CORO_API ("Coro::Event");
| ^~~~~~~~~~
rm -f ../blib/arch/auto/Coro/Event/Event.so
arm-linux-gnueabihf-gcc -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Event.o -o ../blib/arch/auto/Coro/Event/Event.so \
\
chmod 755 ../blib/arch/auto/Coro/Event/Event.so
Manifying 1 pod document
make[2]: Leaving directory '/<<PKGBUILDDIR>>/Event'
make[2]: Entering directory '/<<PKGBUILDDIR>>/EV'
Running Mkbootstrap for EV ()
chmod 644 "EV.bs"
"/usr/bin/perl" "/usr/share/perl/5.34.0/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.34/ExtUtils/typemap' EV.xs > EV.xsc
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644
cp EV.pm ../blib/lib/Coro/EV.pm
mv EV.xsc EV.c
arm-linux-gnueabihf-gcc -c -I/usr/lib/arm-linux-gnueabihf/perl5/5.34/EV -I/usr/lib/arm-linux-gnueabihf/perl5/5.34 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.57\" -DXS_VERSION=\"6.57\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.34/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 EV.c
In file included from EV.xs:9:
EV.xs: In function 'boot_Coro__EV':
/usr/lib/arm-linux-gnueabihf/perl5/5.34/EV/EVAPI.h:195:12: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
195 | GEVAPI = (struct EVAPI*) SvIV (sv); \
| ^
EV.xs:358:9: note: in expansion of macro 'I_EV_API'
358 | I_EV_API ("Coro::EV");
| ^~~~~~~~
In file included from EV.xs:10:
../Coro/CoroAPI.h:122:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
122 | GCoroAPI = (struct CoroAPI*) SvIV (sv); \
| ^
EV.xs:359:9: note: in expansion of macro 'I_CORO_API'
359 | I_CORO_API ("Coro::EV");
| ^~~~~~~~~~
rm -f ../blib/arch/auto/Coro/EV/EV.so
arm-linux-gnueabihf-gcc -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong EV.o -o ../blib/arch/auto/Coro/EV/EV.so \
\
chmod 755 ../blib/arch/auto/Coro/EV/EV.so
Manifying 1 pod document
make[2]: Leaving directory '/<<PKGBUILDDIR>>/EV'
Manifying 20 pod documents
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_auto_test -a
make -j4 test TEST_VERBOSE=1
make[1]: Entering directory '/<<PKGBUILDDIR>>'
make[2]: Entering directory '/<<PKGBUILDDIR>>/Coro'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644
Manifying 20 pod documents
make[2]: Leaving directory '/<<PKGBUILDDIR>>/Coro'
make[2]: Entering directory '/<<PKGBUILDDIR>>/Event'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644
Manifying 1 pod document
make[2]: Leaving directory '/<<PKGBUILDDIR>>/Event'
make[2]: Entering directory '/<<PKGBUILDDIR>>/EV'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644
Manifying 1 pod document
make[2]: Leaving directory '/<<PKGBUILDDIR>>/EV'
make[2]: Entering directory '/<<PKGBUILDDIR>>/Coro'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644
No tests defined for Coro::State extension.
make[2]: Leaving directory '/<<PKGBUILDDIR>>/Coro'
make[2]: Entering directory '/<<PKGBUILDDIR>>/Event'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, '../blib/lib', '../blib/arch')" t/*.t
t/00_basic.t ....
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/01_unblock.t ..
1..12
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok
All tests successful.
Files=2, Tests=17, 1 wallclock secs ( 0.18 usr 0.03 sys + 0.68 cusr 0.26 csys = 1.15 CPU)
Result: PASS
make[2]: Leaving directory '/<<PKGBUILDDIR>>/Event'
make[2]: Entering directory '/<<PKGBUILDDIR>>/EV'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, '../blib/lib', '../blib/arch')" t/*.t
t/00_basic.t ....
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/01_unblock.t ..
1..12
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok
All tests successful.
Files=2, Tests=17, 1 wallclock secs ( 0.17 usr 0.02 sys + 0.57 cusr 0.25 csys = 1.01 CPU)
Result: PASS
make[2]: Leaving directory '/<<PKGBUILDDIR>>/EV'
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00_basic.t ..........
1..9
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok
t/01_process.t ........
1..13
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok
t/02_channel.t ........
1..19
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok 18
ok 19
ok
t/03_channel.t ........
1..10
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok
t/04_rwlock.t .........
1..25
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok 18
ok 19
ok 20
ok 21
ok 22
ok 23
ok 24
ok 25
ok
t/05_specific.t .......
1..8
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok
t/06_prio.t ...........
1..10
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok
t/07_eval.t ...........
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/08_join.t ...........
1..10
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok
t/10_bugs.t ...........
1..3
ok 1
ok 2
ok 3
ok
t/11_deadlock.t .......
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/12_exit.t ...........
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/13_diewarn.t ........
1..7
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok
t/14_load.t ...........
1..17
ok 1 # Coro::State ()
ok 2 # Coro ()
ok 3 # Coro::MakeMaker ()
ok 4 # Coro::Signal ()
ok 5 # Coro::Semaphore ()
ok 6 # Coro::SemaphoreSet ()
ok 7 # Coro::Channel ()
ok 8 # Coro::Specific ()
ok 9 # Coro::RWLock ()
ok 10 # Coro::AnyEvent ()
ok 11 # Coro::Timer ()
ok 12 # Coro::Util ()
ok 13 # Coro::Select ()
ok 14 # Coro::Handle ()
ok 15 # Coro::Socket ()
ok 16 # Coro::Storable ()
ok 17 # Coro::Debug ()
ok
t/15_semaphore.t ......
1..6
ok 1 # 998
ok 2
ok 3
ok 4
ok 5
ok 6
ok
t/16_signal.t .........
1..18
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok 18
ok
t/17_rouse.t ..........
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/18_winder.t .........
1..17
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok
t/19_handle.t .........
1..4
ok 1
ok 2
ok 3
ok 4
ok
t/20_mutual_cancel.t ..
1..10
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok
All tests successful.
Files=20, Tests=206, 4 wallclock secs ( 0.47 usr 0.09 sys + 3.17 cusr 0.38 csys = 4.11 CPU)
Result: PASS
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
create-stamp debian/debhelper-build-stamp
dh_prep -a
debian/rules override_dh_auto_install
make[1]: Entering directory '/<<PKGBUILDDIR>>'
dh_auto_install
make -j4 install DESTDIR=/<<PKGBUILDDIR>>/debian/libcoro-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
make[2]: Entering directory '/<<PKGBUILDDIR>>'
make[3]: Entering directory '/<<PKGBUILDDIR>>/Coro'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644
Manifying 20 pod documents
make[3]: Leaving directory '/<<PKGBUILDDIR>>/Coro'
make[3]: Entering directory '/<<PKGBUILDDIR>>/Event'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644
Manifying 1 pod document
make[3]: Leaving directory '/<<PKGBUILDDIR>>/Event'
make[3]: Entering directory '/<<PKGBUILDDIR>>/EV'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644
Manifying 1 pod document
make[3]: Leaving directory '/<<PKGBUILDDIR>>/EV'
Manifying 20 pod documents
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/auto/Coro/State/State.so
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/auto/Coro/Event/Event.so
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/auto/Coro/EV/EV.so
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Semaphore.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/MakeMaker.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/jit-amd64-unix.pl
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/AIO.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/State.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Channel.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/RWLock.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Util.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Storable.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Signal.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Timer.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Handle.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Socket.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Specific.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Debug.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/AnyEvent.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/SemaphoreSet.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/BDB.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Select.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/CoroAPI.h
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/jit-x86-unix.pl
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/LWP.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Intro.pod
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Event.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/EV.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::AIO.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::AnyEvent.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::BDB.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Channel.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Debug.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Handle.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Intro.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::LWP.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::MakeMaker.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::RWLock.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Select.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Semaphore.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::SemaphoreSet.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Signal.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Socket.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Specific.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::State.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Storable.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Timer.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Util.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Event.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::EV.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro.3pm
make[2]: Leaving directory '/<<PKGBUILDDIR>>'
sed -i '1s|^#!/opt/bin/perl|#!/usr/bin/perl|' /<<PKGBUILDDIR>>/debian/libcoro-perl//usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/*.pl
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_installdocs -a
dh_installchangelogs -a
debian/rules override_dh_installexamples
make[1]: Entering directory '/<<PKGBUILDDIR>>'
dh_installexamples
sed -i '1s|^#!/opt/bin/perl|#!/usr/bin/perl|' /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/doc/libcoro-perl/examples/*
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_installman -a
dh_perl -a
dh_link -a
dh_strip_nondeterminism -a
dh_compress -a
dh_fixperms -a
dh_missing -a
dh_dwz -a
dh_strip -a
dh_makeshlibs -a
dh_shlibdeps -a
dh_installdeb -a
dh_gencontrol -a
dh_md5sums -a
dh_builddeb -a
dpkg-deb: building package 'libcoro-perl-dbgsym' in '../libcoro-perl-dbgsym_6.570-3_armhf.deb'.
dpkg-deb: building package 'libcoro-perl' in '../libcoro-perl_6.570-3_armhf.deb'.
dpkg-genbuildinfo --build=any -O../libcoro-perl_6.570-3_armhf.buildinfo
dpkg-genchanges --build=any -mRaspbian wandboard test autobuilder <root@raspbian.org> -O../libcoro-perl_6.570-3_armhf.changes
dpkg-genchanges: info: binary-only arch-specific upload (source code and arch-indep packages not included)
dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)
--------------------------------------------------------------------------------
Build finished at 2022-10-16T06:46:39Z
Finished
--------
I: Built successfully
+------------------------------------------------------------------------------+
| Post Build Chroot |
+------------------------------------------------------------------------------+
+------------------------------------------------------------------------------+
| Changes |
+------------------------------------------------------------------------------+
libcoro-perl_6.570-3_armhf.changes:
-----------------------------------
Format: 1.8
Date: Thu, 13 Oct 2022 16:29:37 +0100
Source: libcoro-perl
Binary: libcoro-perl libcoro-perl-dbgsym
Architecture: armhf
Version: 6.570-3
Distribution: bookworm-staging
Urgency: medium
Maintainer: Raspbian wandboard test autobuilder <root@raspbian.org>
Changed-By: Jelmer Vernooij <jelmer@debian.org>
Description:
libcoro-perl - Perl framework implementing coroutines
Changes:
libcoro-perl (6.570-3) unstable; urgency=medium
.
[ Debian Janitor ]
* Apply multi-arch hints. + libcoro-perl: Drop Multi-Arch: same.
Checksums-Sha1:
401d9d50fd20de8f7a8f6d8a52b8a8f8f467c3ad 167388 libcoro-perl-dbgsym_6.570-3_armhf.deb
9cf10b953b8f1f1f695ea8a594c45b27f21d54b3 5169 libcoro-perl_6.570-3_armhf.buildinfo
bc19fe6f6732977e44c3f069612bffc00aa7c64b 218712 libcoro-perl_6.570-3_armhf.deb
Checksums-Sha256:
8d8541f51cf9b3999f30f0a0452f2dd594d506ee851dbf8c2db4729123423044 167388 libcoro-perl-dbgsym_6.570-3_armhf.deb
f81498ebc51b71ed077c2842f91bf007fc7a6d16ada86a113a875db6a739872c 5169 libcoro-perl_6.570-3_armhf.buildinfo
bbb5c49092cb484ea5830a24b491a8b4b0f037824c6544ea76338d3244940dc5 218712 libcoro-perl_6.570-3_armhf.deb
Files:
e6f378b9031b5d92ff4a67f7efe079f5 167388 debug optional libcoro-perl-dbgsym_6.570-3_armhf.deb
d3fc3cd0bbaa1a5042a8e2bb150e3e9b 5169 perl optional libcoro-perl_6.570-3_armhf.buildinfo
8ef48cd937ea41fea9304a333cd9f53c 218712 perl optional libcoro-perl_6.570-3_armhf.deb
+------------------------------------------------------------------------------+
| Package contents |
+------------------------------------------------------------------------------+
libcoro-perl-dbgsym_6.570-3_armhf.deb
-------------------------------------
new Debian package, version 2.0.
size 167388 bytes: control archive=700 bytes.
464 bytes, 12 lines control
410 bytes, 4 lines md5sums
Package: libcoro-perl-dbgsym
Source: libcoro-perl
Version: 6.570-3
Auto-Built-Package: debug-symbols
Architecture: armhf
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Installed-Size: 202
Depends: libcoro-perl (= 6.570-3)
Section: debug
Priority: optional
Description: debug symbols for libcoro-perl
Build-Ids: 0802a2033e45439984b46e763b6555636c449659 6e71e12db5d3ea20e3cf0ef36454115527c2e020 d8e5e6d75d25628c18ae3ad7a572e60dfe43aa41
drwxr-xr-x root/root 0 2022-10-13 15:29 ./
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/lib/
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/lib/debug/
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/lib/debug/.build-id/
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/lib/debug/.build-id/08/
-rw-r--r-- root/root 136156 2022-10-13 15:29 ./usr/lib/debug/.build-id/08/02a2033e45439984b46e763b6555636c449659.debug
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/lib/debug/.build-id/6e/
-rw-r--r-- root/root 12916 2022-10-13 15:29 ./usr/lib/debug/.build-id/6e/71e12db5d3ea20e3cf0ef36454115527c2e020.debug
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/lib/debug/.build-id/d8/
-rw-r--r-- root/root 20832 2022-10-13 15:29 ./usr/lib/debug/.build-id/d8/e5e6d75d25628c18ae3ad7a572e60dfe43aa41.debug
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/lib/debug/.dwz/
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/lib/debug/.dwz/arm-linux-gnueabihf/
-rw-r--r-- root/root 21016 2022-10-13 15:29 ./usr/lib/debug/.dwz/arm-linux-gnueabihf/libcoro-perl.debug
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/share/
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/share/doc/
lrwxrwxrwx root/root 0 2022-10-13 15:29 ./usr/share/doc/libcoro-perl-dbgsym -> libcoro-perl
libcoro-perl_6.570-3_armhf.deb
------------------------------
new Debian package, version 2.0.
size 218712 bytes: control archive=2868 bytes.
1544 bytes, 30 lines control
5400 bytes, 67 lines md5sums
Package: libcoro-perl
Version: 6.570-3
Architecture: armhf
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Installed-Size: 652
Depends: perl (>= 5.34.0-5), perlapi-5.34.0, libc6 (>= 2.34), libanyevent-perl, libcommon-sense-perl, libguard-perl
Recommends: libev-perl, libevent-perl, libio-aio-perl, libnet-http-perl
Section: perl
Priority: optional
Homepage: https://metacpan.org/release/Coro
Description: Perl framework implementing coroutines
Coro is a collection of modules which manages continuations in general, most
often in the form of cooperative threads (also called coros, or simply "coro"
in the documentation). They do not actually execute at the same time, even on
machines with multiple processors.
.
The specific flavor of thread offered by this module also guarantees you that
it will not switch between threads unless necessary. It switches at easily-
identified points in your program, so locking and parallel access are rarely
an issue, making threaded programming much safer and easier than using other
threading models.
.
Coro provides a full shared address space, which makes communication between
threads very easy. A parallel matrix multiplication benchmark runs over 300
times faster on a single core than perl's ithreads on a quad core using all
four cores.
.
This version of Coro has been patched by the Debian Project to provide
compatibility with Perl 5.22 and Perl 5.24. Please send bug reports to
Debian (<https://www.debian.org/Bugs/>) and not the original author.
drwxr-xr-x root/root 0 2022-10-13 15:29 ./
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/lib/
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/lib/arm-linux-gnueabihf/
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/
-rw-r--r-- root/root 45934 2022-10-13 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro.pm
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/
-rw-r--r-- root/root 4936 2020-07-29 13:08 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/AIO.pm
-rw-r--r-- root/root 13601 2020-07-29 13:08 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/AnyEvent.pm
-rw-r--r-- root/root 1516 2020-07-29 13:08 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/BDB.pm
-rw-r--r-- root/root 4053 2020-07-29 13:08 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Channel.pm
-rw-r--r-- root/root 5222 2020-03-11 09:47 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/CoroAPI.h
-rw-r--r-- root/root 16457 2020-07-29 13:08 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Debug.pm
-rw-r--r-- root/root 2618 2020-07-29 13:08 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/EV.pm
-rw-r--r-- root/root 5430 2020-07-29 13:08 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Event.pm
-rw-r--r-- root/root 13820 2020-07-29 13:08 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Handle.pm
-rw-r--r-- root/root 26831 2022-10-13 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Intro.pod
-rw-r--r-- root/root 4016 2020-07-29 13:08 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/LWP.pm
-rw-r--r-- root/root 3750 2020-07-29 13:08 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/MakeMaker.pm
-rw-r--r-- root/root 2311 2020-07-29 13:08 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/RWLock.pm
-rw-r--r-- root/root 3782 2020-07-29 13:08 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Select.pm
-rw-r--r-- root/root 4408 2022-10-13 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Semaphore.pm
-rw-r--r-- root/root 4197 2020-07-29 13:08 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/SemaphoreSet.pm
-rw-r--r-- root/root 2294 2020-07-29 13:08 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Signal.pm
-rw-r--r-- root/root 5471 2020-07-29 13:08 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Socket.pm
-rw-r--r-- root/root 1828 2020-07-29 13:08 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Specific.pm
-rw-r--r-- root/root 19435 2020-07-29 13:08 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/State.pm
-rw-r--r-- root/root 3764 2020-07-29 13:08 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Storable.pm
-rw-r--r-- root/root 1657 2020-07-29 13:08 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Timer.pm
-rw-r--r-- root/root 5567 2020-07-29 13:08 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/Util.pm
-rwxr-xr-x root/root 2769 2022-10-13 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/jit-amd64-unix.pl
-rwxr-xr-x root/root 2977 2022-10-13 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/Coro/jit-x86-unix.pl
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/auto/
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/auto/Coro/
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/auto/Coro/EV/
-rw-r--r-- root/root 66984 2022-10-13 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/auto/Coro/EV/EV.so
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/auto/Coro/Event/
-rw-r--r-- root/root 66952 2022-10-13 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/auto/Coro/Event/Event.so
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/auto/Coro/State/
-rw-r--r-- root/root 132728 2022-10-13 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.34/auto/Coro/State/State.so
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/share/
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/share/doc/
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/share/doc/libcoro-perl/
-rw-r--r-- root/root 227 2022-10-13 15:29 ./usr/share/doc/libcoro-perl/NEWS.Debian.gz
-rw-r--r-- root/root 277 2005-03-03 17:20 ./usr/share/doc/libcoro-perl/README
-rw-r--r-- root/root 1207 2008-03-02 16:10 ./usr/share/doc/libcoro-perl/README.linux-glibc
-rw-r--r-- root/root 846 2022-10-13 15:29 ./usr/share/doc/libcoro-perl/changelog.Debian.gz
-rw-r--r-- root/root 24968 2020-07-29 13:08 ./usr/share/doc/libcoro-perl/changelog.gz
-rw-r--r-- root/root 6879 2022-10-13 15:29 ./usr/share/doc/libcoro-perl/copyright
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/share/doc/libcoro-perl/examples/
-rw-r--r-- root/root 1714 2022-10-13 15:29 ./usr/share/doc/libcoro-perl/examples/bench
-rw-r--r-- root/root 316 2022-10-13 15:29 ./usr/share/doc/libcoro-perl/examples/dns
-rw-r--r-- root/root 1222 2022-10-13 15:29 ./usr/share/doc/libcoro-perl/examples/event
-rw-r--r-- root/root 526 2022-10-13 15:29 ./usr/share/doc/libcoro-perl/examples/lwp
-rw-r--r-- root/root 8492 2022-10-13 15:29 ./usr/share/doc/libcoro-perl/examples/myhttpd
-rw-r--r-- root/root 618 2022-10-13 15:29 ./usr/share/doc/libcoro-perl/examples/prodcons1
-rw-r--r-- root/root 665 2022-10-13 15:29 ./usr/share/doc/libcoro-perl/examples/prodcons2
-rw-r--r-- root/root 620 2022-10-13 15:29 ./usr/share/doc/libcoro-perl/examples/prodcons3
-rw-r--r-- root/root 752 2022-10-13 15:29 ./usr/share/doc/libcoro-perl/examples/readline
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/share/man/
drwxr-xr-x root/root 0 2022-10-13 15:29 ./usr/share/man/man3/
-rw-r--r-- root/root 17637 2022-10-13 15:29 ./usr/share/man/man3/Coro.3pm.gz
-rw-r--r-- root/root 2925 2022-10-13 15:29 ./usr/share/man/man3/Coro::AIO.3pm.gz
-rw-r--r-- root/root 5477 2022-10-13 15:29 ./usr/share/man/man3/Coro::AnyEvent.3pm.gz
-rw-r--r-- root/root 1740 2022-10-13 15:29 ./usr/share/man/man3/Coro::BDB.3pm.gz
-rw-r--r-- root/root 2652 2022-10-13 15:29 ./usr/share/man/man3/Coro::Channel.3pm.gz
-rw-r--r-- root/root 3912 2022-10-13 15:29 ./usr/share/man/man3/Coro::Debug.3pm.gz
-rw-r--r-- root/root 2217 2022-10-13 15:29 ./usr/share/man/man3/Coro::EV.3pm.gz
-rw-r--r-- root/root 2869 2022-10-13 15:29 ./usr/share/man/man3/Coro::Event.3pm.gz
-rw-r--r-- root/root 3291 2022-10-13 15:29 ./usr/share/man/man3/Coro::Handle.3pm.gz
-rw-r--r-- root/root 11688 2022-10-13 15:29 ./usr/share/man/man3/Coro::Intro.3pm.gz
-rw-r--r-- root/root 2728 2022-10-13 15:29 ./usr/share/man/man3/Coro::LWP.3pm.gz
-rw-r--r-- root/root 2500 2022-10-13 15:29 ./usr/share/man/man3/Coro::MakeMaker.3pm.gz
-rw-r--r-- root/root 1740 2022-10-13 15:29 ./usr/share/man/man3/Coro::RWLock.3pm.gz
-rw-r--r-- root/root 2198 2022-10-13 15:29 ./usr/share/man/man3/Coro::Select.3pm.gz
-rw-r--r-- root/root 2673 2022-10-13 15:29 ./usr/share/man/man3/Coro::Semaphore.3pm.gz
-rw-r--r-- root/root 2220 2022-10-13 15:29 ./usr/share/man/man3/Coro::SemaphoreSet.3pm.gz
-rw-r--r-- root/root 1995 2022-10-13 15:29 ./usr/share/man/man3/Coro::Signal.3pm.gz
-rw-r--r-- root/root 2199 2022-10-13 15:29 ./usr/share/man/man3/Coro::Socket.3pm.gz
-rw-r--r-- root/root 1812 2022-10-13 15:29 ./usr/share/man/man3/Coro::Specific.3pm.gz
-rw-r--r-- root/root 8877 2022-10-13 15:29 ./usr/share/man/man3/Coro::State.3pm.gz
-rw-r--r-- root/root 2155 2022-10-13 15:29 ./usr/share/man/man3/Coro::Storable.3pm.gz
-rw-r--r-- root/root 1682 2022-10-13 15:29 ./usr/share/man/man3/Coro::Timer.3pm.gz
-rw-r--r-- root/root 2589 2022-10-13 15:29 ./usr/share/man/man3/Coro::Util.3pm.gz
+------------------------------------------------------------------------------+
| Post Build |
+------------------------------------------------------------------------------+
+------------------------------------------------------------------------------+
| Cleanup |
+------------------------------------------------------------------------------+
Purging /<<BUILDDIR>>
Not cleaning session: cloned chroot in use
+------------------------------------------------------------------------------+
| Summary |
+------------------------------------------------------------------------------+
Build Architecture: armhf
Build-Space: 4412
Build-Time: 98
Distribution: bookworm-staging
Host Architecture: armhf
Install-Time: 350
Job: libcoro-perl_6.570-3
Machine Architecture: armhf
Package: libcoro-perl
Package-Time: 500
Source-Version: 6.570-3
Space: 4412
Status: successful
Version: 6.570-3
--------------------------------------------------------------------------------
Finished at 2022-10-16T06:46:39Z
Build needed 00:08:20, 4412k disc space