libcoro-perl →
6.550-1 →
armhf → 2019-08-14 07:58:16
sbuild (Debian sbuild) 0.73.0 (23 Dec 2016) on test2019
+==============================================================================+
| libcoro-perl 6.550-1 (armhf) Wed, 14 Aug 2019 07:52:12 +0000 |
+==============================================================================+
Package: libcoro-perl
Version: 6.550-1
Source Version: 6.550-1
Distribution: bullseye-staging
Machine Architecture: armhf
Host Architecture: armhf
Build Architecture: armhf
Build Type: any
I: NOTICE: Log filtering will replace 'var/run/schroot/mount/bullseye-staging-armhf-sbuild-e5a2eb39-04b5-4b2c-9474-adb04d76f1e5' with '<<CHROOT>>'
+------------------------------------------------------------------------------+
| Update chroot |
+------------------------------------------------------------------------------+
Get:1 http://172.17.0.1/private bullseye-staging InRelease [11.3 kB]
Get:2 http://172.17.0.1/private bullseye-staging/main Sources [11.4 MB]
Get:3 http://172.17.0.1/private bullseye-staging/main armhf Packages [13.0 MB]
Fetched 24.5 MB in 19s (1310 kB/s)
Reading package lists...
+------------------------------------------------------------------------------+
| Fetch source files |
+------------------------------------------------------------------------------+
Check APT
---------
Checking available source versions...
Download source files with APT
------------------------------
Reading package lists...
NOTICE: 'libcoro-perl' packaging is maintained in the 'Git' version control system at:
https://salsa.debian.org/perl-team/modules/packages/libcoro-perl.git
Please use:
git clone https://salsa.debian.org/perl-team/modules/packages/libcoro-perl.git
to retrieve the latest (possibly unreleased) updates to the package.
Need to get 206 kB of source archives.
Get:1 http://172.17.0.1/private bullseye-staging/main libcoro-perl 6.550-1 (dsc) [2465 B]
Get:2 http://172.17.0.1/private bullseye-staging/main libcoro-perl 6.550-1 (tar) [196 kB]
Get:3 http://172.17.0.1/private bullseye-staging/main libcoro-perl 6.550-1 (diff) [7636 B]
Fetched 206 kB in 0s (748 kB/s)
Download complete and in download only mode
I: NOTICE: Log filtering will replace 'build/libcoro-perl-xxp5iJ/libcoro-perl-6.550' with '<<PKGBUILDDIR>>'
I: NOTICE: Log filtering will replace 'build/libcoro-perl-xxp5iJ' with '<<BUILDDIR>>'
+------------------------------------------------------------------------------+
| Install build-essential |
+------------------------------------------------------------------------------+
Setup apt archive
-----------------
Merged Build-Depends: build-essential, fakeroot
Filtered Build-Depends: build-essential, fakeroot
dpkg-deb: building package 'sbuild-build-depends-core-dummy' in '/<<BUILDDIR>>/resolver-yho4h2/apt_archive/sbuild-build-depends-core-dummy.deb'.
dpkg-scanpackages: warning: Packages in archive but missing from override file:
dpkg-scanpackages: warning: sbuild-build-depends-core-dummy
dpkg-scanpackages: info: Wrote 1 entries to output Packages file.
gpg: keybox '/<<BUILDDIR>>/resolver-yho4h2/gpg/pubring.kbx' created
gpg: /<<BUILDDIR>>/resolver-yho4h2/gpg/trustdb.gpg: trustdb created
gpg: key E70254B6505CF8F7: public key "Sbuild Signer (Sbuild Build Dependency Archive Key) <buildd-tools-devel@lists.alioth.debian.org>" imported
gpg: Total number processed: 1
gpg: imported: 1
gpg: key E70254B6505CF8F7: "Sbuild Signer (Sbuild Build Dependency Archive Key) <buildd-tools-devel@lists.alioth.debian.org>" not changed
gpg: key E70254B6505CF8F7: secret key imported
gpg: Total number processed: 1
gpg: unchanged: 1
gpg: secret keys read: 1
gpg: secret keys imported: 1
gpg: using "Sbuild Signer" as default secret key for signing
Ign:1 copy:/<<BUILDDIR>>/resolver-yho4h2/apt_archive ./ InRelease
Get:2 copy:/<<BUILDDIR>>/resolver-yho4h2/apt_archive ./ Release [957 B]
Get:3 copy:/<<BUILDDIR>>/resolver-yho4h2/apt_archive ./ Release.gpg [370 B]
Ign:3 copy:/<<BUILDDIR>>/resolver-yho4h2/apt_archive ./ Release.gpg
Get:4 copy:/<<BUILDDIR>>/resolver-yho4h2/apt_archive ./ Sources [349 B]
Get:5 copy:/<<BUILDDIR>>/resolver-yho4h2/apt_archive ./ Packages [432 B]
Fetched 2108 B in 1s (3876 B/s)
Reading package lists...
W: copy:///<<BUILDDIR>>/resolver-yho4h2/apt_archive/./Release.gpg: The key(s) in the keyring /etc/apt/trusted.gpg.d/sbuild-build-depends-archive.gpg are ignored as the file is not readable by user '_apt' executing apt-key.
W: GPG error: copy:/<<BUILDDIR>>/resolver-yho4h2/apt_archive ./ Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY E70254B6505CF8F7
Reading package lists...
Install core build dependencies (apt-based resolver)
----------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
The following NEW packages will be installed:
sbuild-build-depends-core-dummy
0 upgraded, 1 newly installed, 0 to remove and 87 not upgraded.
Need to get 852 B of archives.
After this operation, 0 B of additional disk space will be used.
Get:1 copy:/<<BUILDDIR>>/resolver-yho4h2/apt_archive ./ sbuild-build-depends-core-dummy 0.invalid.0 [852 B]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 852 B in 0s (0 B/s)
Selecting previously unselected package sbuild-build-depends-core-dummy.
(Reading database ... 12044 files and directories currently installed.)
Preparing to unpack .../sbuild-build-depends-core-dummy_0.invalid.0_armhf.deb ...
Unpacking sbuild-build-depends-core-dummy (0.invalid.0) ...
Setting up sbuild-build-depends-core-dummy (0.invalid.0) ...
+------------------------------------------------------------------------------+
| Check architectures |
+------------------------------------------------------------------------------+
Arch check ok (armhf included in any)
+------------------------------------------------------------------------------+
| Install package build dependencies |
+------------------------------------------------------------------------------+
Setup apt archive
-----------------
Merged Build-Depends: debhelper-compat (= 12), libanyevent-perl, libcanary-stability-perl, libcommon-sense-perl, libev-perl, libevent-perl, libguard-perl, perl
Filtered Build-Depends: debhelper-compat (= 12), libanyevent-perl, libcanary-stability-perl, libcommon-sense-perl, libev-perl, libevent-perl, libguard-perl, perl
dpkg-deb: building package 'sbuild-build-depends-libcoro-perl-dummy' in '/<<BUILDDIR>>/resolver-yho4h2/apt_archive/sbuild-build-depends-libcoro-perl-dummy.deb'.
dpkg-scanpackages: warning: Packages in archive but missing from override file:
dpkg-scanpackages: warning: sbuild-build-depends-core-dummy sbuild-build-depends-libcoro-perl-dummy
dpkg-scanpackages: info: Wrote 2 entries to output Packages file.
gpg: using "Sbuild Signer" as default secret key for signing
Ign:1 copy:/<<BUILDDIR>>/resolver-yho4h2/apt_archive ./ InRelease
Get:2 copy:/<<BUILDDIR>>/resolver-yho4h2/apt_archive ./ Release [963 B]
Get:3 copy:/<<BUILDDIR>>/resolver-yho4h2/apt_archive ./ Release.gpg [370 B]
Ign:3 copy:/<<BUILDDIR>>/resolver-yho4h2/apt_archive ./ Release.gpg
Get:4 copy:/<<BUILDDIR>>/resolver-yho4h2/apt_archive ./ Sources [554 B]
Get:5 copy:/<<BUILDDIR>>/resolver-yho4h2/apt_archive ./ Packages [624 B]
Fetched 2511 B in 1s (4858 B/s)
Reading package lists...
W: copy:///<<BUILDDIR>>/resolver-yho4h2/apt_archive/./Release.gpg: The key(s) in the keyring /etc/apt/trusted.gpg.d/sbuild-build-depends-archive.gpg are ignored as the file is not readable by user '_apt' executing apt-key.
W: GPG error: copy:/<<BUILDDIR>>/resolver-yho4h2/apt_archive ./ Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY E70254B6505CF8F7
Reading package lists...
Install libcoro-perl build dependencies (apt-based resolver)
------------------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
autoconf automake autopoint autotools-dev bsdmainutils debhelper
dh-autoreconf dh-strip-nondeterminism dwz file gettext gettext-base
groff-base intltool-debian libanyevent-perl libarchive-zip-perl libbsd0
libcanary-stability-perl libcommon-sense-perl libcroco3 libelf1 libev-perl
libevent-perl libfile-stripnondeterminism-perl libglib2.0-0 libguard-perl
libicu63 libmagic-mgc libmagic1 libncurses6 libncursesw6 libpipeline1
libsigsegv2 libsub-override-perl libtinfo5 libtinfo6 libtool libuchardet0
libxml2 m4 man-db po-debconf sensible-utils
Suggested packages:
autoconf-archive gnu-standards autoconf-doc wamerican | wordlist whois
vacation dh-make gettext-doc libasprintf-dev libgettextpo-dev groff
libio-async-perl libjson-perl | libjson-xs-perl libnet-ssleay-perl
libpoe-perl libtask-weaken-perl libtool-doc gfortran | fortran95-compiler
gcj-jdk m4-doc apparmor less www-browser libmail-box-perl
Recommended packages:
curl | wget | lynx libasync-interrupt-perl libarchive-cpio-perl
libglib2.0-data shared-mime-info xdg-user-dirs libgpm2 libltdl-dev
libmail-sendmail-perl
The following NEW packages will be installed:
autoconf automake autopoint autotools-dev bsdmainutils debhelper
dh-autoreconf dh-strip-nondeterminism dwz file gettext gettext-base
groff-base intltool-debian libanyevent-perl libarchive-zip-perl libbsd0
libcanary-stability-perl libcommon-sense-perl libcroco3 libelf1 libev-perl
libevent-perl libfile-stripnondeterminism-perl libglib2.0-0 libguard-perl
libicu63 libmagic-mgc libmagic1 libncurses6 libpipeline1 libsigsegv2
libsub-override-perl libtinfo5 libtool libuchardet0 libxml2 m4 man-db
po-debconf sbuild-build-depends-libcoro-perl-dummy sensible-utils
The following packages will be upgraded:
libncursesw6 libtinfo6
2 upgraded, 42 newly installed, 0 to remove and 85 not upgraded.
Need to get 19.8 MB of archives.
After this operation, 69.0 MB of additional disk space will be used.
Get:1 copy:/<<BUILDDIR>>/resolver-yho4h2/apt_archive ./ sbuild-build-depends-libcoro-perl-dummy 0.invalid.0 [908 B]
Get:2 http://172.17.0.1/private bullseye-staging/main armhf libbsd0 armhf 0.9.1-2 [104 kB]
Get:3 http://172.17.0.1/private bullseye-staging/main armhf libtinfo5 armhf 6.1+20190713-2 [313 kB]
Get:4 http://172.17.0.1/private bullseye-staging/main armhf bsdmainutils armhf 11.1.2 [182 kB]
Get:5 http://172.17.0.1/private bullseye-staging/main armhf libuchardet0 armhf 0.0.6-3 [62.2 kB]
Get:6 http://172.17.0.1/private bullseye-staging/main armhf groff-base armhf 1.22.4-3 [782 kB]
Get:7 http://172.17.0.1/private bullseye-staging/main armhf libpipeline1 armhf 1.5.1-2 [26.6 kB]
Get:8 http://172.17.0.1/private bullseye-staging/main armhf man-db armhf 2.8.6.1-1 [1248 kB]
Get:9 http://172.17.0.1/private bullseye-staging/main armhf libtinfo6 armhf 6.1+20190713-2 [317 kB]
Get:10 http://172.17.0.1/private bullseye-staging/main armhf libncursesw6 armhf 6.1+20190713-2 [104 kB]
Get:11 http://172.17.0.1/private bullseye-staging/main armhf sensible-utils all 0.0.12 [15.8 kB]
Get:12 http://172.17.0.1/private bullseye-staging/main armhf libmagic-mgc armhf 1:5.37-5 [253 kB]
Get:13 http://172.17.0.1/private bullseye-staging/main armhf libmagic1 armhf 1:5.37-5 [111 kB]
Get:14 http://172.17.0.1/private bullseye-staging/main armhf file armhf 1:5.37-5 [66.2 kB]
Get:15 http://172.17.0.1/private bullseye-staging/main armhf gettext-base armhf 0.19.8.1-9 [117 kB]
Get:16 http://172.17.0.1/private bullseye-staging/main armhf libsigsegv2 armhf 2.12-2 [32.3 kB]
Get:17 http://172.17.0.1/private bullseye-staging/main armhf m4 armhf 1.4.18-2 [185 kB]
Get:18 http://172.17.0.1/private bullseye-staging/main armhf autoconf all 2.69-11 [341 kB]
Get:19 http://172.17.0.1/private bullseye-staging/main armhf autotools-dev all 20180224.1 [77.0 kB]
Get:20 http://172.17.0.1/private bullseye-staging/main armhf automake all 1:1.16.1-4 [771 kB]
Get:21 http://172.17.0.1/private bullseye-staging/main armhf autopoint all 0.19.8.1-9 [434 kB]
Get:22 http://172.17.0.1/private bullseye-staging/main armhf libtool all 2.4.6-9 [547 kB]
Get:23 http://172.17.0.1/private bullseye-staging/main armhf dh-autoreconf all 19 [16.9 kB]
Get:24 http://172.17.0.1/private bullseye-staging/main armhf libarchive-zip-perl all 1.64-1 [96.8 kB]
Get:25 http://172.17.0.1/private bullseye-staging/main armhf libsub-override-perl all 0.09-2 [10.2 kB]
Get:26 http://172.17.0.1/private bullseye-staging/main armhf libfile-stripnondeterminism-perl all 1.4.0-1 [21.9 kB]
Get:27 http://172.17.0.1/private bullseye-staging/main armhf dh-strip-nondeterminism all 1.4.0-1 [14.0 kB]
Get:28 http://172.17.0.1/private bullseye-staging/main armhf libelf1 armhf 0.176-1.1 [158 kB]
Get:29 http://172.17.0.1/private bullseye-staging/main armhf dwz armhf 0.12.20190723-1 [68.6 kB]
Get:30 http://172.17.0.1/private bullseye-staging/main armhf libglib2.0-0 armhf 2.60.6-1 [1110 kB]
Get:31 http://172.17.0.1/private bullseye-staging/main armhf libicu63 armhf 63.2-2 [7974 kB]
Get:32 http://172.17.0.1/private bullseye-staging/main armhf libxml2 armhf 2.9.4+dfsg1-7+b2 [571 kB]
Get:33 http://172.17.0.1/private bullseye-staging/main armhf libcroco3 armhf 0.6.12-3 [132 kB]
Get:34 http://172.17.0.1/private bullseye-staging/main armhf libncurses6 armhf 6.1+20190713-2 [78.8 kB]
Get:35 http://172.17.0.1/private bullseye-staging/main armhf gettext armhf 0.19.8.1-9 [1219 kB]
Get:36 http://172.17.0.1/private bullseye-staging/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB]
Get:37 http://172.17.0.1/private bullseye-staging/main armhf po-debconf all 1.0.21 [248 kB]
Get:38 http://172.17.0.1/private bullseye-staging/main armhf debhelper all 12.3 [1029 kB]
Get:39 http://172.17.0.1/private bullseye-staging/main armhf libanyevent-perl armhf 7.160-1 [398 kB]
Get:40 http://172.17.0.1/private bullseye-staging/main armhf libcanary-stability-perl armhf 2006-2 [8816 B]
Get:41 http://172.17.0.1/private bullseye-staging/main armhf libcommon-sense-perl armhf 3.74-2+b18 [24.0 kB]
Get:42 http://172.17.0.1/private bullseye-staging/main armhf libev-perl armhf 4.27-1 [248 kB]
Get:43 http://172.17.0.1/private bullseye-staging/main armhf libevent-perl armhf 1.27-1 [259 kB]
Get:44 http://172.17.0.1/private bullseye-staging/main armhf libguard-perl armhf 1.023-1+b4 [15.4 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 19.8 MB in 7s (3035 kB/s)
Selecting previously unselected package libbsd0:armhf.
(Reading database ... 12044 files and directories currently installed.)
Preparing to unpack .../0-libbsd0_0.9.1-2_armhf.deb ...
Unpacking libbsd0:armhf (0.9.1-2) ...
Selecting previously unselected package libtinfo5:armhf.
Preparing to unpack .../1-libtinfo5_6.1+20190713-2_armhf.deb ...
Unpacking libtinfo5:armhf (6.1+20190713-2) ...
Selecting previously unselected package bsdmainutils.
Preparing to unpack .../2-bsdmainutils_11.1.2_armhf.deb ...
Unpacking bsdmainutils (11.1.2) ...
Selecting previously unselected package libuchardet0:armhf.
Preparing to unpack .../3-libuchardet0_0.0.6-3_armhf.deb ...
Unpacking libuchardet0:armhf (0.0.6-3) ...
Selecting previously unselected package groff-base.
Preparing to unpack .../4-groff-base_1.22.4-3_armhf.deb ...
Unpacking groff-base (1.22.4-3) ...
Selecting previously unselected package libpipeline1:armhf.
Preparing to unpack .../5-libpipeline1_1.5.1-2_armhf.deb ...
Unpacking libpipeline1:armhf (1.5.1-2) ...
Selecting previously unselected package man-db.
Preparing to unpack .../6-man-db_2.8.6.1-1_armhf.deb ...
Unpacking man-db (2.8.6.1-1) ...
Preparing to unpack .../7-libtinfo6_6.1+20190713-2_armhf.deb ...
Unpacking libtinfo6:armhf (6.1+20190713-2) over (6.1+20181013-2) ...
Setting up libtinfo6:armhf (6.1+20190713-2) ...
(Reading database ... 12685 files and directories currently installed.)
Preparing to unpack .../libncursesw6_6.1+20190713-2_armhf.deb ...
Unpacking libncursesw6:armhf (6.1+20190713-2) over (6.1+20181013-2) ...
Setting up libncursesw6:armhf (6.1+20190713-2) ...
Selecting previously unselected package sensible-utils.
(Reading database ... 12685 files and directories currently installed.)
Preparing to unpack .../00-sensible-utils_0.0.12_all.deb ...
Unpacking sensible-utils (0.0.12) ...
Selecting previously unselected package libmagic-mgc.
Preparing to unpack .../01-libmagic-mgc_1%3a5.37-5_armhf.deb ...
Unpacking libmagic-mgc (1:5.37-5) ...
Selecting previously unselected package libmagic1:armhf.
Preparing to unpack .../02-libmagic1_1%3a5.37-5_armhf.deb ...
Unpacking libmagic1:armhf (1:5.37-5) ...
Selecting previously unselected package file.
Preparing to unpack .../03-file_1%3a5.37-5_armhf.deb ...
Unpacking file (1:5.37-5) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../04-gettext-base_0.19.8.1-9_armhf.deb ...
Unpacking gettext-base (0.19.8.1-9) ...
Selecting previously unselected package libsigsegv2:armhf.
Preparing to unpack .../05-libsigsegv2_2.12-2_armhf.deb ...
Unpacking libsigsegv2:armhf (2.12-2) ...
Selecting previously unselected package m4.
Preparing to unpack .../06-m4_1.4.18-2_armhf.deb ...
Unpacking m4 (1.4.18-2) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../07-autoconf_2.69-11_all.deb ...
Unpacking autoconf (2.69-11) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../08-autotools-dev_20180224.1_all.deb ...
Unpacking autotools-dev (20180224.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../09-automake_1%3a1.16.1-4_all.deb ...
Unpacking automake (1:1.16.1-4) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../10-autopoint_0.19.8.1-9_all.deb ...
Unpacking autopoint (0.19.8.1-9) ...
Selecting previously unselected package libtool.
Preparing to unpack .../11-libtool_2.4.6-9_all.deb ...
Unpacking libtool (2.4.6-9) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../12-dh-autoreconf_19_all.deb ...
Unpacking dh-autoreconf (19) ...
Selecting previously unselected package libarchive-zip-perl.
Preparing to unpack .../13-libarchive-zip-perl_1.64-1_all.deb ...
Unpacking libarchive-zip-perl (1.64-1) ...
Selecting previously unselected package libsub-override-perl.
Preparing to unpack .../14-libsub-override-perl_0.09-2_all.deb ...
Unpacking libsub-override-perl (0.09-2) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../15-libfile-stripnondeterminism-perl_1.4.0-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.4.0-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../16-dh-strip-nondeterminism_1.4.0-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.4.0-1) ...
Selecting previously unselected package libelf1:armhf.
Preparing to unpack .../17-libelf1_0.176-1.1_armhf.deb ...
Unpacking libelf1:armhf (0.176-1.1) ...
Selecting previously unselected package dwz.
Preparing to unpack .../18-dwz_0.12.20190723-1_armhf.deb ...
Unpacking dwz (0.12.20190723-1) ...
Selecting previously unselected package libglib2.0-0:armhf.
Preparing to unpack .../19-libglib2.0-0_2.60.6-1_armhf.deb ...
Unpacking libglib2.0-0:armhf (2.60.6-1) ...
Selecting previously unselected package libicu63:armhf.
Preparing to unpack .../20-libicu63_63.2-2_armhf.deb ...
Unpacking libicu63:armhf (63.2-2) ...
Selecting previously unselected package libxml2:armhf.
Preparing to unpack .../21-libxml2_2.9.4+dfsg1-7+b2_armhf.deb ...
Unpacking libxml2:armhf (2.9.4+dfsg1-7+b2) ...
Selecting previously unselected package libcroco3:armhf.
Preparing to unpack .../22-libcroco3_0.6.12-3_armhf.deb ...
Unpacking libcroco3:armhf (0.6.12-3) ...
Selecting previously unselected package libncurses6:armhf.
Preparing to unpack .../23-libncurses6_6.1+20190713-2_armhf.deb ...
Unpacking libncurses6:armhf (6.1+20190713-2) ...
Selecting previously unselected package gettext.
Preparing to unpack .../24-gettext_0.19.8.1-9_armhf.deb ...
Unpacking gettext (0.19.8.1-9) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../25-intltool-debian_0.35.0+20060710.5_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.5) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../26-po-debconf_1.0.21_all.deb ...
Unpacking po-debconf (1.0.21) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../27-debhelper_12.3_all.deb ...
Unpacking debhelper (12.3) ...
Selecting previously unselected package libanyevent-perl.
Preparing to unpack .../28-libanyevent-perl_7.160-1_armhf.deb ...
Unpacking libanyevent-perl (7.160-1) ...
Selecting previously unselected package libcanary-stability-perl.
Preparing to unpack .../29-libcanary-stability-perl_2006-2_armhf.deb ...
Unpacking libcanary-stability-perl (2006-2) ...
Selecting previously unselected package libcommon-sense-perl.
Preparing to unpack .../30-libcommon-sense-perl_3.74-2+b18_armhf.deb ...
Unpacking libcommon-sense-perl (3.74-2+b18) ...
Selecting previously unselected package libev-perl.
Preparing to unpack .../31-libev-perl_4.27-1_armhf.deb ...
Unpacking libev-perl (4.27-1) ...
Selecting previously unselected package libevent-perl.
Preparing to unpack .../32-libevent-perl_1.27-1_armhf.deb ...
Unpacking libevent-perl (1.27-1) ...
Selecting previously unselected package libguard-perl.
Preparing to unpack .../33-libguard-perl_1.023-1+b4_armhf.deb ...
Unpacking libguard-perl (1.023-1+b4) ...
Selecting previously unselected package sbuild-build-depends-libcoro-perl-dummy.
Preparing to unpack .../34-sbuild-build-depends-libcoro-perl-dummy_0.invalid.0_armhf.deb ...
Unpacking sbuild-build-depends-libcoro-perl-dummy (0.invalid.0) ...
Setting up libanyevent-perl (7.160-1) ...
Setting up libpipeline1:armhf (1.5.1-2) ...
Setting up libevent-perl (1.27-1) ...
Setting up libmagic-mgc (1:5.37-5) ...
Setting up libarchive-zip-perl (1.64-1) ...
Setting up libglib2.0-0:armhf (2.60.6-1) ...
No schema files found: doing nothing.
Setting up libmagic1:armhf (1:5.37-5) ...
Setting up libcommon-sense-perl (3.74-2+b18) ...
Setting up gettext-base (0.19.8.1-9) ...
Setting up file (1:5.37-5) ...
Setting up libcanary-stability-perl (2006-2) ...
Setting up libicu63:armhf (63.2-2) ...
Setting up autotools-dev (20180224.1) ...
Setting up libncurses6:armhf (6.1+20190713-2) ...
Setting up libsigsegv2:armhf (2.12-2) ...
Setting up autopoint (0.19.8.1-9) ...
Setting up sensible-utils (0.0.12) ...
Setting up libuchardet0:armhf (0.0.6-3) ...
Setting up libsub-override-perl (0.09-2) ...
Setting up libbsd0:armhf (0.9.1-2) ...
Setting up libev-perl (4.27-1) ...
Setting up libtinfo5:armhf (6.1+20190713-2) ...
Setting up libelf1:armhf (0.176-1.1) ...
Setting up libguard-perl (1.023-1+b4) ...
Setting up libxml2:armhf (2.9.4+dfsg1-7+b2) ...
Setting up libfile-stripnondeterminism-perl (1.4.0-1) ...
Setting up libtool (2.4.6-9) ...
Setting up m4 (1.4.18-2) ...
Setting up bsdmainutils (11.1.2) ...
update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode
update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode
Setting up libcroco3:armhf (0.6.12-3) ...
Setting up autoconf (2.69-11) ...
Setting up dwz (0.12.20190723-1) ...
Setting up groff-base (1.22.4-3) ...
Setting up automake (1:1.16.1-4) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
Setting up gettext (0.19.8.1-9) ...
Setting up man-db (2.8.6.1-1) ...
Not building database; man-db/auto-update is not 'true'.
Setting up intltool-debian (0.35.0+20060710.5) ...
Setting up po-debconf (1.0.21) ...
Setting up dh-autoreconf (19) ...
Setting up debhelper (12.3) ...
Setting up sbuild-build-depends-libcoro-perl-dummy (0.invalid.0) ...
Setting up dh-strip-nondeterminism (1.4.0-1) ...
Processing triggers for libc-bin (2.28-10+rpi1) ...
+------------------------------------------------------------------------------+
| Build environment |
+------------------------------------------------------------------------------+
Kernel: Linux 4.19.20-v7+ armhf (armv7l)
Toolchain package versions: binutils_2.31.1-16+rpi1 dpkg-dev_1.19.7 g++-8_8.3.0-6+rpi1 gcc-8_8.3.0-6+rpi1 libc6-dev_2.28-10+rpi1 libstdc++-8-dev_8.3.0-6+rpi1 libstdc++6_8.3.0-6+rpi1 linux-libc-dev_4.18.20-2+rpi1
Package versions: adduser_3.118 apt_1.8.2 autoconf_2.69-11 automake_1:1.16.1-4 autopoint_0.19.8.1-9 autotools-dev_20180224.1 base-files_10.3+rpi1 base-passwd_3.5.46 bash_5.0-4 binutils_2.31.1-16+rpi1 binutils-arm-linux-gnueabihf_2.31.1-16+rpi1 binutils-common_2.31.1-16+rpi1 bsdmainutils_11.1.2 bsdutils_1:2.33.1-0.1 build-essential_12.6 bzip2_1.0.6-9.1 coreutils_8.30-3 cpp_4:8.3.0-1+rpi2 cpp-8_8.3.0-6+rpi1 dash_0.5.10.2-5 debconf_1.5.71 debhelper_12.3 debianutils_4.8.6.1 dh-autoreconf_19 dh-strip-nondeterminism_1.4.0-1 diffutils_1:3.7-3 dirmngr_2.2.12-1+rpi1 dpkg_1.19.7 dpkg-dev_1.19.7 dwz_0.12.20190723-1 e2fsprogs_1.44.5-1 fakeroot_1.23-1 fdisk_2.33.1-0.1 file_1:5.37-5 findutils_4.6.0+git+20190209-2 g++_4:8.3.0-1+rpi2 g++-8_8.3.0-6+rpi1 gcc_4:8.3.0-1+rpi2 gcc-4.9-base_4.9.4-2+rpi1+b19 gcc-5-base_5.5.0-8 gcc-6-base_6.5.0-1+rpi1+b1 gcc-7-base_7.3.0-19 gcc-8_8.3.0-6+rpi1 gcc-8-base_8.3.0-6+rpi1 gettext_0.19.8.1-9 gettext-base_0.19.8.1-9 gnupg_2.2.12-1+rpi1 gnupg-l10n_2.2.12-1+rpi1 gnupg-utils_2.2.12-1+rpi1 gpg_2.2.12-1+rpi1 gpg-agent_2.2.12-1+rpi1 gpg-wks-client_2.2.12-1+rpi1 gpg-wks-server_2.2.12-1+rpi1 gpgconf_2.2.12-1+rpi1 gpgsm_2.2.12-1+rpi1 gpgv_2.2.12-1+rpi1 grep_3.3-1 groff-base_1.22.4-3 gzip_1.9-3 hostname_3.21 init-system-helpers_1.56+nmu1 intltool-debian_0.35.0+20060710.5 libacl1_2.2.53-4 libanyevent-perl_7.160-1 libapt-pkg5.0_1.8.2 libarchive-zip-perl_1.64-1 libasan5_8.3.0-6+rpi1 libassuan0_2.5.2-1 libatomic1_8.3.0-6+rpi1 libattr1_1:2.4.48-4 libaudit-common_1:2.8.4-3 libaudit1_1:2.8.4-3 libbinutils_2.31.1-16+rpi1 libblkid1_2.33.1-0.1 libbsd0_0.9.1-2 libbz2-1.0_1.0.6-9.1 libc-bin_2.28-10+rpi1 libc-dev-bin_2.28-10+rpi1 libc6_2.28-10+rpi1 libc6-dev_2.28-10+rpi1 libcanary-stability-perl_2006-2 libcap-ng0_0.7.9-2 libcc1-0_8.3.0-6+rpi1 libcom-err2_1.44.5-1 libcommon-sense-perl_3.74-2+b18 libcroco3_0.6.12-3 libdb5.3_5.3.28+dfsg1-0.5 libdebconfclient0_0.249 libdpkg-perl_1.19.7 libelf1_0.176-1.1 libev-perl_4.27-1 libevent-perl_1.27-1 libext2fs2_1.44.5-1 libfakeroot_1.23-1 libfdisk1_2.33.1-0.1 libffi6_3.2.1-9 libfile-stripnondeterminism-perl_1.4.0-1 libgcc-8-dev_8.3.0-6+rpi1 libgcc1_1:8.3.0-6+rpi1 libgcrypt20_1.8.4-5 libgdbm-compat4_1.18.1-4 libgdbm6_1.18.1-4 libglib2.0-0_2.60.6-1 libgmp10_2:6.1.2+dfsg-4 libgnutls30_3.6.7-4 libgomp1_8.3.0-6+rpi1 libgpg-error0_1.35-1 libguard-perl_1.023-1+b4 libhogweed4_3.4.1-1 libicu63_63.2-2 libidn2-0_2.0.5-1 libisl19_0.20-2 libksba8_1.3.5-2 libldap-2.4-2_2.4.47+dfsg-3+rpi1 libldap-common_2.4.47+dfsg-3+rpi1 liblocale-gettext-perl_1.07-3+b3 liblz4-1_1.8.3-1 liblzma5_5.2.4-1 libmagic-mgc_1:5.37-5 libmagic1_1:5.37-5 libmount1_2.33.1-0.1 libmpc3_1.1.0-1 libmpfr6_4.0.2-1 libncurses6_6.1+20190713-2 libncursesw6_6.1+20190713-2 libnettle6_3.4.1-1 libnpth0_1.6-1 libp11-kit0_0.23.15-2 libpam-modules_1.3.1-5 libpam-modules-bin_1.3.1-5 libpam-runtime_1.3.1-5 libpam0g_1.3.1-5 libpcre3_2:8.39-12 libperl5.28_5.28.1-6 libpipeline1_1.5.1-2 libreadline7_7.0-5 libsasl2-2_2.1.27+dfsg-1+b1 libsasl2-modules-db_2.1.27+dfsg-1+b1 libseccomp2_2.3.3-4 libselinux1_2.8-1+b1 libsemanage-common_2.8-2 libsemanage1_2.8-2 libsepol1_2.8-1 libsigsegv2_2.12-2 libsmartcols1_2.33.1-0.1 libsqlite3-0_3.27.2-3 libss2_1.44.5-1 libstdc++-8-dev_8.3.0-6+rpi1 libstdc++6_8.3.0-6+rpi1 libsub-override-perl_0.09-2 libsystemd0_241-5+rpi1 libtasn1-6_4.13-3 libtext-charwidth-perl_0.04-7.1+b1 libtext-iconv-perl_1.7-5+b10 libtext-wrapi18n-perl_0.06-7.1 libtinfo5_6.1+20190713-2 libtinfo6_6.1+20190713-2 libtool_2.4.6-9 libubsan1_8.3.0-6+rpi1 libuchardet0_0.0.6-3 libudev1_241-5+rpi1 libunistring2_0.9.10-1 libuuid1_2.33.1-0.1 libxml2_2.9.4+dfsg1-7+b2 libzstd1_1.3.8+dfsg-3+rpi1 linux-libc-dev_4.18.20-2+rpi1 login_1:4.5-1.1 lsb-base_10.2019051400+rpi1 m4_1.4.18-2 make_4.2.1-1.2 man-db_2.8.6.1-1 mawk_1.3.3-17 mount_2.33.1-0.1 ncurses-base_6.1+20181013-2 ncurses-bin_6.1+20181013-2 passwd_1:4.5-1.1 patch_2.7.6-3 perl_5.28.1-6 perl-base_5.28.1-6 perl-modules-5.28_5.28.1-6 pinentry-curses_1.1.0-2 po-debconf_1.0.21 raspbian-archive-keyring_20120528.2 readline-common_7.0-5 sbuild-build-depends-core-dummy_0.invalid.0 sbuild-build-depends-libcoro-perl-dummy_0.invalid.0 sed_4.7-1 sensible-utils_0.0.12 sysvinit-utils_2.93-8 tar_1.30+dfsg-6 tzdata_2019a-1 util-linux_2.33.1-0.1 xz-utils_5.2.4-1 zlib1g_1:1.2.11.dfsg-1
+------------------------------------------------------------------------------+
| Build |
+------------------------------------------------------------------------------+
Unpack source
-------------
gpgv: unknown type of key resource 'trustedkeys.kbx'
gpgv: keyblock resource '/sbuild-nonexistent/.gnupg/trustedkeys.kbx': General error
gpgv: Signature made Sun Aug 11 19:00:14 2019 UTC
gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06
gpgv: Can't check signature: No public key
dpkg-source: warning: failed to verify signature on ./libcoro-perl_6.550-1.dsc
dpkg-source: info: extracting libcoro-perl in /<<PKGBUILDDIR>>
dpkg-source: info: unpacking libcoro-perl_6.550.orig.tar.gz
dpkg-source: info: unpacking libcoro-perl_6.550-1.debian.tar.xz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: applying whatis.patch
dpkg-source: info: applying spelling.patch
Check disk space
----------------
Sufficient free space for build
User Environment
----------------
APT_CONFIG=/var/lib/sbuild/apt.conf
DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/112/bus
DEB_BUILD_OPTIONS=parallel=4
HOME=/sbuild-nonexistent
INVOCATION_ID=4fe0c36549824d2eaa38a0bc838e0f29
JOURNAL_STREAM=8:15635
LANG=en_GB.UTF-8
LC_ALL=POSIX
LOGNAME=buildd
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
PWD=/
SCHROOT_ALIAS_NAME=bullseye-staging-armhf-sbuild
SCHROOT_CHROOT_NAME=bullseye-staging-armhf-sbuild
SCHROOT_COMMAND=env
SCHROOT_GID=116
SCHROOT_GROUP=buildd
SCHROOT_SESSION_ID=bullseye-staging-armhf-sbuild-e5a2eb39-04b5-4b2c-9474-adb04d76f1e5
SCHROOT_UID=112
SCHROOT_USER=buildd
SHELL=/bin/sh
USER=buildd
XDG_RUNTIME_DIR=/run/user/112
XDG_SESSION_ID=c11275
dpkg-buildpackage
-----------------
dpkg-buildpackage: info: source package libcoro-perl
dpkg-buildpackage: info: source version 6.550-1
dpkg-buildpackage: info: source distribution unstable
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture armhf
fakeroot debian/rules clean
dh clean
dh_clean
debian/rules build-arch
dh build-arch
dh_update_autotools_config -a
dh_autoreconf -a
dh_auto_configure -a
perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=arm-linux-gnueabihf-gcc -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now"
***
*** The stability canary says: (nothing, it was driven away by harsh weather)
***
*** It seems you are running perl version 5.028001, likely the "official" or
*** "standard" version. While there is nothing wrong with doing that,
*** standard perl versions 5.022 and up are not supported by Coro.
*** While this might be fatal, it might also be all right - if you run into
*** problems, you might want to downgrade your perl or switch to the
*** stability branch.
***
*** If everything works fine, you can ignore this message.
***
*** Stability canary mini-FAQ:
***
*** Do I need to do anything?
*** With luck, no. While some distributions are known to fail
*** already, most should probably work. This message is here
*** to alert you that your perl is not supported by Coro,
*** and if things go wrong, you either need to downgrade, or
*** sidegrade to the stability variant of your perl version,
*** or simply live with the consequences.
***
*** What is this canary thing?
*** It's purpose is to check support status of Coro with
*** respect to your perl version.
***
*** What is this "stability branch"?
*** It's a branch or fork of the official perl, by schmorp, to
*** improve stability and compatibility with existing modules.
***
*** How can I skip this prompt on automated installs?
*** Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment.
*** More info is in the Canary::Stability manpage.
***
*** Long version of this FAQ: http://stableperl.schmorp.de/faq.html
*** Stability Branch homepage: http://stableperl.schmorp.de/
***
Continue anyways? [y] y
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Event version 1.27 found, building Event support.
EV version 4.27 found, building EV support.
Checking if your kit is complete...
Looks good
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro has a number of configuration options. Due to its maturity, the
defaults that Coro chooses are usually fine, so you can decide to skip
these questions. Only if something went wrong you should select 'n'
here and manually configure Coro, and, of course, report this to the
maintainer :)
Skip further questions and use defaults (y/n)? [y] y
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can use a number of methods to implement coroutines at the C
level. The default chosen is based on your current confguration and is
correct in most cases, but you still can chose between these alternatives:
u The unix 'ucontext.h' functions are relatively new and not implemented
or well-tested in older unices. They allow very fast coroutine creation
and reasonably fast switching. They are, however, usually slower than
the other alternatives due to an extra syscall done by swapcontext. And
while nominally most portable (it's the only POSIX-standardised
interface for coroutines), ucontext functions are, as usual, broken on
most/all BSDs.
s If the ucontext functions are not working or you don't want
to use them for other reasons you can try a workaround using
setjmp/longjmp/sigaltstack (also standard unix functions). Coroutine
creation is rather slow, but switching is very fast (often much faster
than with the ucontext functions). Unfortunately, glibc-2.1 and
below don't even feature a working sigaltstack. You cannot use this
implementation if some other code uses SIGUSR2 or you plan to create
coroutines from an alternative signal stack, as both are being used for
coroutine creation.
a Handcoded assembly. This is the fastest and most compatible method,
with the least side effects, if it works, that is. It has been tested
on GNU/Linux x86 and x86_64 systems and should work on all x86/x86_64
systems using the SVR ELF ABI (it is also reported to be working on
Strawberry Perl for Windows using MinGW). This is the recommended
method on supported platforms. When it doesn't work, use another
method, such as (s)etjmp/longjmp.
l GNU/Linux. Very old GNU/Linux systems (glibc-2.1 and below) need
this hack. Since it is very linux-specific it is also quite fast and
recommended even for newer versions; when it works, that is (currently
x86 and a few others only. If it compiles, it's usually ok). Newer
glibc versions (>= 2.5) stop working with this implementation however.
i IRIX. For some reason, SGI really does not like to follow POSIX (does
that surprise you?), so this workaround might be needed (it's fast),
although [s] and [u] should also work now.
w Microsoft Windows. Try this on Microsoft Windows when using Cygwin or
the MSVC compilers (e.g. ActiveState Perl, but see "a" for Strawberry
Perl), although, as there is no standard on how to do this under
windows, different environments might work differently. Doh.
f Microsoft Windows. Try this on Microsoft Windows if w fails. It is slower
and uses a lot more memory, but should be working all the time.
p Use pthread API. Try to avoid this option, it was only created to
make a point about the programming language shootout. It is unlikely
to work with perls that have windows process emulation enabled ("perl
threads"). It is also likely the slowest method of implementing
coroutines. It might work fine as a last resort, however, as the
pthread API is slightly better tested than ucontext functions for
example. Of course, not on BSDs, who usually have very broken pthread
implementations.
Coro tries hard to come up with a suitable default for most systems,
so pressing return at the prompt usually does the right thing. If you
experience problems (e.g. make test fails) then you should experiment with
this setting.
Use which implementation,
<s>etjmp, <u>ctx, <a>sm, <i>rix, <l>inux, <p>threads, <w>indows, <f>iber? [s] s
Using setjmp/longjmp/sigaltstack implementation
Trying to detect stack growth direction (for TEST_sigaltstack)
You might see some warnings, this should not concern you.
libcoro/conftest.c: In function 'main':
libcoro/conftest.c:98:28: error: storage size of 'ss' isn't known
struct sigaltstack ss;
^~
*****************************************************************************
If the testsuite fails PLEASE provide the following information
to Marc Lehmann <schmorp@schmorp.de>: operating system name, version,
architecture name and this string '|'. Thanks a lot!
*****************************************************************************
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Per-context stack size factor: Depending on your settings, Coro tries to
share the C stacks is creates as much as possible, but sometimes it needs
to allocate a new one. This setting controls the maximum size that gets
allocated, and should not be set too high, as memory and address space
still is wasted even if it's not fully used. The value entered will be
multiplied by sizeof(void *), which is usually 4 on 32-bit systems, and 8
on 64-bit systems.
A setting of 16384 (the default) therefore corresponds to a 64k..128k
stack, which usually is ample space (you might even want to try 8192 or
lower if your program creates many coroutines).
On systems supporting mmap and dynamic memory management, the actual
memory usually gets allocated on demand, but with many large stacks you
can still run out of address space on your typical 32 bit platform (not to
forget the pagetables).
Some perls (mostly threaded ones and perl compiled under linux 2.6) and
some programs (inefficient regexes can use a lot of stack space) may
need much, much more: If Coro segfaults with weird backtraces (e.g. in a
function prologue) or in t/10_bugs.t, you might want to increase this to
65536 or more.
The default should be fine, and can be changed at runtime with
Coro::State::cctx_stacksize.
C stack size factor? [16384] 16384
using a stacksize of 16384 * sizeof(void*)
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can optionally put a guard area before each stack segment: When the
stack is too small and the access is not too far outside the stack (i.e.
within the guard area), then the program will safely segfault instead of
running into other data. The cost is some additional overhead with is
usually negligible, and extra use of address space.
The guard area size currently needs to be specified in pages (typical
pagesizes are 4k and 8k). The guard area is only enabled on a few
hardcoded architectures and is ignored on others. The actual preprocessor
expression disables this feature if:
!__i386 && !__x86_64 && !__powerpc && !__m68k
&& !__alpha && !__mips && !__sparc64
The default, as usual, should be just fine.
Number of guard pages (0 disables)? [4] 4
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can tell valgrind about its stacks and so reduce spurious warnings
where valgrind would otherwise complain about possible stack switches.
Enabling this does not incur noticable runtime or memory overhead, but it
requires that you have the <valgrind/valgrind.h> header file available.
Valgrind support is completely optional, so disabling it is the safe
choice.
Enable valgrind support (y/n)? [n] n
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can use (or even trick) some perl functions into doing what it needs
instead of relying on (some) of its own functions. This might increase
chances that it compiles and works, but it could just as well result in
memory leaks, crashes or silent data corruption. It certainly does result
in slightly slower speed and higher memory consumption, though, so YOU
SHOULD ENABLE THIS OPTION ONLY AS A LAST RESORT.
Prefer perl functions over coro functions (y/n)? [n] n
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can use a simple JIT compiler to compile a part of the thread switch
function at runtime. On perls with windows process emulation (most!),
this results in a 50% speed improvement. On sane perls, the gain is much
less, usually around 5%. If you enable this option, then the JIT will
be enabled, on compatible operating systems and CPUs (currently only
x86/amd64 on certain unix clones). Otherwise, it will be disabled. It
should be safe to leave on - this setting is only here so you can switch
it off in case of problems.
Note that some broken kernels (often calling themselves "hardened") break
all JIT generation by manipulating some system calls. If you get bus
errors or segmentation faults immediately when the JIT is enabled but not
without, then note that disabling the JIT only fixes some symptoms, not
the underlying problem, and you might run into other problems later.
Try to use the JIT compiler, if available? [y] y
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro has experimental support for cloning states. This can be used
to implement a scheme-like call/cc. However, this doesn't add to the
expressiveness in general, and is likely perl-version specific (and perl
5.12 deliberately removed support for it). As such, it is disabled by
default. Enable it when you want to play around with it, but note that it
isn't supported, and unlikely ever will be. It exists mainly to prove that
it could be done - if only it were useful for something.
Implement Coro::State->clone method (y/n)? [n] n
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Writing MYMETA.yml and MYMETA.json
Writing MYMETA.yml and MYMETA.json
Writing MYMETA.yml and MYMETA.json
Generating a Unix-style Makefile
Writing Makefile for Coro
Writing MYMETA.yml and MYMETA.json
dh_auto_build -a
make -j4
make[1]: Entering directory '/<<PKGBUILDDIR>>'
make[2]: Entering directory '/<<PKGBUILDDIR>>/Coro'
Running Mkbootstrap for State ()
"/usr/bin/perl" "/usr/share/perl/5.28.1/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.28/ExtUtils/typemap' -typemap '/<<PKGBUILDDIR>>/Coro/typemap' State.xs > State.xsc
chmod 644 "State.bs"
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644
cp Coro/Socket.pm blib/lib/Coro/Socket.pm
cp Coro/Signal.pm blib/lib/Coro/Signal.pm
cp Coro/LWP.pm blib/lib/Coro/LWP.pm
cp Coro/jit-x86-unix.pl blib/lib/Coro/jit-x86-unix.pl
cp Coro/jit-amd64-unix.pl blib/lib/Coro/jit-amd64-unix.pl
cp Coro/Util.pm blib/lib/Coro/Util.pm
cp Coro/AnyEvent.pm blib/lib/Coro/AnyEvent.pm
cp Coro.pm blib/lib/Coro.pm
cp Coro/SemaphoreSet.pm blib/lib/Coro/SemaphoreSet.pm
cp Coro/State.pm blib/lib/Coro/State.pm
cp Coro/RWLock.pm blib/lib/Coro/RWLock.pm
cp Coro/Debug.pm blib/lib/Coro/Debug.pm
cp Coro/Storable.pm blib/lib/Coro/Storable.pm
cp Coro/MakeMaker.pm blib/lib/Coro/MakeMaker.pm
cp Coro/Timer.pm blib/lib/Coro/Timer.pm
cp Coro/Channel.pm blib/lib/Coro/Channel.pm
cp Coro/CoroAPI.h blib/lib/Coro/CoroAPI.h
cp Coro/Handle.pm blib/lib/Coro/Handle.pm
cp Coro/AIO.pm blib/lib/Coro/AIO.pm
cp Coro/BDB.pm blib/lib/Coro/BDB.pm
cp Coro/Select.pm blib/lib/Coro/Select.pm
cp Coro/Semaphore.pm blib/lib/Coro/Semaphore.pm
cp Coro/Specific.pm blib/lib/Coro/Specific.pm
Skip ../blib/lib/Coro/Socket.pm (unchanged)
cp Intro.pod ../blib/lib/Coro/Intro.pod
Skip ../blib/lib/Coro/State.pm (unchanged)
Skip ../blib/lib/Coro/AnyEvent.pm (unchanged)
Skip ../blib/lib/Coro/Specific.pm (unchanged)
Skip ../blib/lib/Coro/LWP.pm (unchanged)
Skip ../blib/lib/Coro/RWLock.pm (unchanged)
Skip ../blib/lib/Coro/AIO.pm (unchanged)
Skip ../blib/lib/Coro/Storable.pm (unchanged)
Skip ../blib/lib/Coro/Handle.pm (unchanged)
Skip ../blib/lib/Coro/Semaphore.pm (unchanged)
Skip ../blib/lib/Coro/jit-x86-unix.pl (unchanged)
Skip ../blib/lib/Coro/SemaphoreSet.pm (unchanged)
Skip ../blib/lib/Coro/BDB.pm (unchanged)
Skip ../blib/lib/Coro/Channel.pm (unchanged)
Skip ../blib/lib/Coro/Util.pm (unchanged)
Skip ../blib/lib/Coro/Timer.pm (unchanged)
Skip ../blib/lib/Coro/MakeMaker.pm (unchanged)
Skip ../blib/lib/Coro/jit-amd64-unix.pl (unchanged)
Skip ../blib/lib/Coro/Debug.pm (unchanged)
Skip ../blib/lib/Coro/Signal.pm (unchanged)
Skip ../blib/lib/Coro/Select.pm (unchanged)
Warning: Aliases 'is_zombie' and 'is_destroyed' have identical values in State.xs, line 3889
mv State.xsc State.c
arm-linux-gnueabihf-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.55\" -DXS_VERSION=\"6.55\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.28/CORE" -D_FORTIFY_SOURCE=0 -DCORO_SJLJ -DCORO_STACKSIZE=16384 -DCORO_GUARDPAGES=4 -DCORO_JIT=1 State.c
<command-line>: warning: "_FORTIFY_SOURCE" redefined
<command-line>: note: this is the location of the previous definition
rm -f ../blib/arch/auto/Coro/State/State.so
arm-linux-gnueabihf-gcc -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong State.o -o ../blib/arch/auto/Coro/State/State.so \
\
chmod 755 ../blib/arch/auto/Coro/State/State.so
Manifying 20 pod documents
make[2]: Leaving directory '/<<PKGBUILDDIR>>/Coro'
make[2]: Entering directory '/<<PKGBUILDDIR>>/Event'
Running Mkbootstrap for Event ()
chmod 644 "Event.bs"
"/usr/bin/perl" "/usr/share/perl/5.28.1/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.28/ExtUtils/typemap' Event.xs > Event.xsc
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644
cp Event.pm ../blib/lib/Coro/Event.pm
mv Event.xsc Event.c
arm-linux-gnueabihf-gcc -c -I/usr/lib/arm-linux-gnueabihf/perl5/5.28/Event -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.55\" -DXS_VERSION=\"6.55\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.28/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 Event.c
In file included from Event.xs:8:
Event.xs: In function 'boot_Coro__Event':
/usr/lib/arm-linux-gnueabihf/perl5/5.28/Event/EventAPI.h:252:15: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
GEventAPI = (struct EventAPI*) SvIV(sv); \
^
Event.xs:82:9: note: in expansion of macro 'I_EVENT_API'
I_EVENT_API ("Coro::Event");
^~~~~~~~~~~
/usr/lib/arm-linux-gnueabihf/perl5/5.28/Event/EventAPI.h:254:11: warning: format '%d' expects argument of type 'int', but argument 2 has type 'I32' {aka 'long int'} [-Wformat=]
croak("Event::API version mismatch (%d != %d) -- please recompile %s", \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
GEventAPI->Ver, EventAPI_VERSION, YourName); \
~~~~~~~~~~~~~~
/usr/lib/arm-linux-gnueabihf/perl5/5.28/Event/EventAPI.h:254:11: note: in definition of macro 'I_EVENT_API'
croak("Event::API version mismatch (%d != %d) -- please recompile %s", \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from Event.xs:9:
../Coro/CoroAPI.h:110:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
GCoroAPI = (struct CoroAPI*) SvIV (sv); \
^
Event.xs:83:2: note: in expansion of macro 'I_CORO_API'
I_CORO_API ("Coro::Event");
^~~~~~~~~~
rm -f ../blib/arch/auto/Coro/Event/Event.so
arm-linux-gnueabihf-gcc -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Event.o -o ../blib/arch/auto/Coro/Event/Event.so \
\
chmod 755 ../blib/arch/auto/Coro/Event/Event.so
Manifying 1 pod document
make[2]: Leaving directory '/<<PKGBUILDDIR>>/Event'
make[2]: Entering directory '/<<PKGBUILDDIR>>/EV'
Running Mkbootstrap for EV ()
chmod 644 "EV.bs"
"/usr/bin/perl" "/usr/share/perl/5.28.1/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.28/ExtUtils/typemap' EV.xs > EV.xsc
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644
cp EV.pm ../blib/lib/Coro/EV.pm
mv EV.xsc EV.c
arm-linux-gnueabihf-gcc -c -I/usr/lib/arm-linux-gnueabihf/perl5/5.28/EV -I/usr/lib/arm-linux-gnueabihf/perl5/5.28 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.55\" -DXS_VERSION=\"6.55\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.28/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 EV.c
In file included from EV.xs:9:
EV.xs: In function 'boot_Coro__EV':
/usr/lib/arm-linux-gnueabihf/perl5/5.28/EV/EVAPI.h:195:12: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
GEVAPI = (struct EVAPI*) SvIV (sv); \
^
EV.xs:300:9: note: in expansion of macro 'I_EV_API'
I_EV_API ("Coro::EV");
^~~~~~~~
In file included from EV.xs:10:
../Coro/CoroAPI.h:110:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
GCoroAPI = (struct CoroAPI*) SvIV (sv); \
^
EV.xs:301:2: note: in expansion of macro 'I_CORO_API'
I_CORO_API ("Coro::EV");
^~~~~~~~~~
rm -f ../blib/arch/auto/Coro/EV/EV.so
arm-linux-gnueabihf-gcc -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong EV.o -o ../blib/arch/auto/Coro/EV/EV.so \
\
chmod 755 ../blib/arch/auto/Coro/EV/EV.so
Manifying 1 pod document
make[2]: Leaving directory '/<<PKGBUILDDIR>>/EV'
Manifying 20 pod documents
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_auto_test -a
make -j4 test TEST_VERBOSE=1
make[1]: Entering directory '/<<PKGBUILDDIR>>'
make[2]: Entering directory '/<<PKGBUILDDIR>>/Coro'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644
Manifying 20 pod documents
make[2]: Leaving directory '/<<PKGBUILDDIR>>/Coro'
make[2]: Entering directory '/<<PKGBUILDDIR>>/Event'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644
Manifying 1 pod document
make[2]: Leaving directory '/<<PKGBUILDDIR>>/Event'
make[2]: Entering directory '/<<PKGBUILDDIR>>/EV'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644
Manifying 1 pod document
make[2]: Leaving directory '/<<PKGBUILDDIR>>/EV'
make[2]: Entering directory '/<<PKGBUILDDIR>>/Coro'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644
No tests defined for Coro::State extension.
make[2]: Leaving directory '/<<PKGBUILDDIR>>/Coro'
make[2]: Entering directory '/<<PKGBUILDDIR>>/Event'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, '../blib/lib', '../blib/arch')" t/*.t
t/00_basic.t ....
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/01_unblock.t ..
1..12
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok
All tests successful.
Files=2, Tests=17, 1 wallclock secs ( 0.05 usr 0.04 sys + 0.24 cusr 0.26 csys = 0.59 CPU)
Result: PASS
make[2]: Leaving directory '/<<PKGBUILDDIR>>/Event'
make[2]: Entering directory '/<<PKGBUILDDIR>>/EV'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, '../blib/lib', '../blib/arch')" t/*.t
t/00_basic.t ....
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/01_unblock.t ..
1..12
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok
All tests successful.
Files=2, Tests=17, 1 wallclock secs ( 0.06 usr 0.01 sys + 0.28 cusr 0.17 csys = 0.52 CPU)
Result: PASS
make[2]: Leaving directory '/<<PKGBUILDDIR>>/EV'
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00_basic.t ..........
1..9
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok
t/01_process.t ........
1..13
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok
t/02_channel.t ........
1..19
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok 18
ok 19
ok
t/03_channel.t ........
1..10
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok
t/04_rwlock.t .........
1..25
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok 18
ok 19
ok 20
ok 21
ok 22
ok 23
ok 24
ok 25
ok
t/05_specific.t .......
1..8
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok
t/06_prio.t ...........
1..10
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok
t/07_eval.t ...........
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/08_join.t ...........
1..10
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok
t/10_bugs.t ...........
1..3
ok 1
ok 2
ok 3
ok
t/11_deadlock.t .......
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/12_exit.t ...........
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/13_diewarn.t ........
1..7
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok
t/14_load.t ...........
1..17
ok 1 # Coro::State ()
ok 2 # Coro ()
ok 3 # Coro::MakeMaker ()
ok 4 # Coro::Signal ()
ok 5 # Coro::Semaphore ()
ok 6 # Coro::SemaphoreSet ()
ok 7 # Coro::Channel ()
ok 8 # Coro::Specific ()
ok 9 # Coro::RWLock ()
ok 10 # Coro::AnyEvent ()
ok 11 # Coro::Timer ()
ok 12 # Coro::Util ()
ok 13 # Coro::Select ()
ok 14 # Coro::Handle ()
ok 15 # Coro::Socket ()
ok 16 # Coro::Storable ()
ok 17 # Coro::Debug ()
ok
t/15_semaphore.t ......
1..6
ok 1 # 998
ok 2
ok 3
ok 4
ok 5
ok 6
ok
t/16_signal.t .........
1..18
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok 18
ok
t/17_rouse.t ..........
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/18_winder.t .........
1..17
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok
t/19_handle.t .........
1..4
ok 1
ok 2
ok 3
ok 4
ok
t/20_mutual_cancel.t ..
1..10
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok
All tests successful.
Files=20, Tests=206, 2 wallclock secs ( 0.20 usr 0.07 sys + 1.35 cusr 0.25 csys = 1.87 CPU)
Result: PASS
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
create-stamp debian/debhelper-build-stamp
fakeroot debian/rules binary-arch
dh binary-arch
dh_testroot -a
dh_prep -a
debian/rules override_dh_auto_install
make[1]: Entering directory '/<<PKGBUILDDIR>>'
dh_auto_install
make -j4 install DESTDIR=/<<PKGBUILDDIR>>/debian/libcoro-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
make[2]: Entering directory '/<<PKGBUILDDIR>>'
make[3]: Entering directory '/<<PKGBUILDDIR>>/Coro'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644
Manifying 20 pod documents
make[3]: Leaving directory '/<<PKGBUILDDIR>>/Coro'
make[3]: Entering directory '/<<PKGBUILDDIR>>/Event'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644
Manifying 1 pod document
make[3]: Leaving directory '/<<PKGBUILDDIR>>/Event'
make[3]: Entering directory '/<<PKGBUILDDIR>>/EV'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644
Manifying 1 pod document
make[3]: Leaving directory '/<<PKGBUILDDIR>>/EV'
Manifying 20 pod documents
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/auto/Coro/State/State.so
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/auto/Coro/Event/Event.so
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/auto/Coro/EV/EV.so
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Socket.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Signal.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/LWP.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/jit-x86-unix.pl
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/jit-amd64-unix.pl
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Util.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/AnyEvent.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/SemaphoreSet.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/State.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/RWLock.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Debug.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Storable.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/MakeMaker.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Timer.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Channel.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/CoroAPI.h
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Handle.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/AIO.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/BDB.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Select.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Semaphore.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Specific.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Intro.pod
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Event.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/EV.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::AIO.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::AnyEvent.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::BDB.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Channel.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Debug.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Handle.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Intro.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::LWP.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::MakeMaker.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::RWLock.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Select.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Semaphore.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::SemaphoreSet.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Signal.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Socket.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Specific.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::State.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Storable.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Timer.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Util.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Event.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::EV.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro.3pm
make[2]: Leaving directory '/<<PKGBUILDDIR>>'
sed -i '1s|^#!/opt/bin/perl|#!/usr/bin/perl|' /<<PKGBUILDDIR>>/debian/libcoro-perl//usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/*.pl
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_installdocs -a
dh_installchangelogs -a
debian/rules override_dh_installexamples
make[1]: Entering directory '/<<PKGBUILDDIR>>'
dh_installexamples
sed -i '1s|^#!/opt/bin/perl|#!/usr/bin/perl|' /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/doc/libcoro-perl/examples/*
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_installman -a
dh_perl -a
dh_link -a
dh_strip_nondeterminism -a
dh_compress -a
dh_fixperms -a
dh_missing -a
dh_dwz -a
dh_strip -a
dh_makeshlibs -a
dh_shlibdeps -a
dh_installdeb -a
dh_gencontrol -a
dh_md5sums -a
dh_builddeb -a
dpkg-deb: building package 'libcoro-perl' in '../libcoro-perl_6.550-1_armhf.deb'.
dpkg-deb: building package 'libcoro-perl-dbgsym' in '../libcoro-perl-dbgsym_6.550-1_armhf.deb'.
dpkg-genbuildinfo --build=any
dpkg-genchanges --build=any -mRaspbian 2019 test autobuilder <root@raspbian.org> >../libcoro-perl_6.550-1_armhf.changes
dpkg-genchanges: info: binary-only arch-specific upload (source code and arch-indep packages not included)
dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)
--------------------------------------------------------------------------------
Build finished at 2019-08-14T07:58:00Z
Finished
--------
I: Built successfully
+------------------------------------------------------------------------------+
| Post Build Chroot |
+------------------------------------------------------------------------------+
+------------------------------------------------------------------------------+
| Changes |
+------------------------------------------------------------------------------+
libcoro-perl_6.550-1_armhf.changes:
-----------------------------------
Format: 1.8
Date: Sun, 11 Aug 2019 20:56:34 +0200
Source: libcoro-perl
Binary: libcoro-perl libcoro-perl-dbgsym
Architecture: armhf
Version: 6.550-1
Distribution: bullseye-staging
Urgency: medium
Maintainer: Raspbian 2019 test autobuilder <root@raspbian.org>
Changed-By: gregor herrmann <gregoa@debian.org>
Description:
libcoro-perl - Perl framework implementing coroutines
Changes:
libcoro-perl (6.550-1) unstable; urgency=medium
.
* Import upstream version 6.550.
* Update years of packaging copyright.
* Annotate test-only build dependencies with <!nocheck>.
* Declare compliance with Debian Policy 4.4.0.
* Bump debhelper-compat to 12.
* debian/watch: use uscan version 4.
* Replace fix-wrong-path-for-interpreter.patch with debian/rules
overrides. This also catches another new occurrence of the hasbang.
Checksums-Sha1:
980f5258146b27c29c8a8031f7f6721463c33c36 165544 libcoro-perl-dbgsym_6.550-1_armhf.deb
8d6e9511ce9be94d26dfdbb4e44f6159f40e319c 4710 libcoro-perl_6.550-1_armhf.buildinfo
1bfb394b6fd0728570058a4f19b3538b461b85bb 219432 libcoro-perl_6.550-1_armhf.deb
Checksums-Sha256:
85f09c23f1e07d26733bc8a3441fbd043be9ea3b4b8fe48ed2139b32dec2bcf2 165544 libcoro-perl-dbgsym_6.550-1_armhf.deb
3252386dd063ab6d3aaf96c601aa4d2b952fbe31a0ded3eca3fa5b30df6571e3 4710 libcoro-perl_6.550-1_armhf.buildinfo
a67a0f4263b4d14ba347774134c00f2f835259bb842f0151cc4c13ccb19a876f 219432 libcoro-perl_6.550-1_armhf.deb
Files:
9c4f352819d17c99efcf32cbf12636b6 165544 debug optional libcoro-perl-dbgsym_6.550-1_armhf.deb
69d9a5039bf657cef2aab0b93cecb0ad 4710 perl optional libcoro-perl_6.550-1_armhf.buildinfo
400bc992ae5626117c831cf19aea30ba 219432 perl optional libcoro-perl_6.550-1_armhf.deb
+------------------------------------------------------------------------------+
| Buildinfo |
+------------------------------------------------------------------------------+
Format: 1.0
Source: libcoro-perl
Binary: libcoro-perl
Architecture: armhf
Version: 6.550-1
Checksums-Md5:
9c4f352819d17c99efcf32cbf12636b6 165544 libcoro-perl-dbgsym_6.550-1_armhf.deb
400bc992ae5626117c831cf19aea30ba 219432 libcoro-perl_6.550-1_armhf.deb
Checksums-Sha1:
980f5258146b27c29c8a8031f7f6721463c33c36 165544 libcoro-perl-dbgsym_6.550-1_armhf.deb
1bfb394b6fd0728570058a4f19b3538b461b85bb 219432 libcoro-perl_6.550-1_armhf.deb
Checksums-Sha256:
85f09c23f1e07d26733bc8a3441fbd043be9ea3b4b8fe48ed2139b32dec2bcf2 165544 libcoro-perl-dbgsym_6.550-1_armhf.deb
a67a0f4263b4d14ba347774134c00f2f835259bb842f0151cc4c13ccb19a876f 219432 libcoro-perl_6.550-1_armhf.deb
Build-Origin: Raspbian
Build-Architecture: armhf
Build-Date: Wed, 14 Aug 2019 07:57:59 +0000
Build-Path: /<<PKGBUILDDIR>>
Installed-Build-Depends:
autoconf (= 2.69-11),
automake (= 1:1.16.1-4),
autopoint (= 0.19.8.1-9),
autotools-dev (= 20180224.1),
base-files (= 10.3+rpi1),
base-passwd (= 3.5.46),
bash (= 5.0-4),
binutils (= 2.31.1-16+rpi1),
binutils-arm-linux-gnueabihf (= 2.31.1-16+rpi1),
binutils-common (= 2.31.1-16+rpi1),
bsdmainutils (= 11.1.2),
bsdutils (= 1:2.33.1-0.1),
build-essential (= 12.6),
bzip2 (= 1.0.6-9.1),
coreutils (= 8.30-3),
cpp (= 4:8.3.0-1+rpi2),
cpp-8 (= 8.3.0-6+rpi1),
dash (= 0.5.10.2-5),
debconf (= 1.5.71),
debhelper (= 12.3),
debianutils (= 4.8.6.1),
dh-autoreconf (= 19),
dh-strip-nondeterminism (= 1.4.0-1),
diffutils (= 1:3.7-3),
dpkg (= 1.19.7),
dpkg-dev (= 1.19.7),
dwz (= 0.12.20190723-1),
fdisk (= 2.33.1-0.1),
file (= 1:5.37-5),
findutils (= 4.6.0+git+20190209-2),
g++ (= 4:8.3.0-1+rpi2),
g++-8 (= 8.3.0-6+rpi1),
gcc (= 4:8.3.0-1+rpi2),
gcc-8 (= 8.3.0-6+rpi1),
gcc-8-base (= 8.3.0-6+rpi1),
gettext (= 0.19.8.1-9),
gettext-base (= 0.19.8.1-9),
grep (= 3.3-1),
groff-base (= 1.22.4-3),
gzip (= 1.9-3),
hostname (= 3.21),
init-system-helpers (= 1.56+nmu1),
intltool-debian (= 0.35.0+20060710.5),
libacl1 (= 2.2.53-4),
libanyevent-perl (= 7.160-1),
libarchive-zip-perl (= 1.64-1),
libasan5 (= 8.3.0-6+rpi1),
libatomic1 (= 8.3.0-6+rpi1),
libattr1 (= 1:2.4.48-4),
libaudit-common (= 1:2.8.4-3),
libaudit1 (= 1:2.8.4-3),
libbinutils (= 2.31.1-16+rpi1),
libblkid1 (= 2.33.1-0.1),
libbsd0 (= 0.9.1-2),
libbz2-1.0 (= 1.0.6-9.1),
libc-bin (= 2.28-10+rpi1),
libc-dev-bin (= 2.28-10+rpi1),
libc6 (= 2.28-10+rpi1),
libc6-dev (= 2.28-10+rpi1),
libcanary-stability-perl (= 2006-2),
libcap-ng0 (= 0.7.9-2),
libcc1-0 (= 8.3.0-6+rpi1),
libcommon-sense-perl (= 3.74-2+b18),
libcroco3 (= 0.6.12-3),
libdb5.3 (= 5.3.28+dfsg1-0.5),
libdebconfclient0 (= 0.249),
libdpkg-perl (= 1.19.7),
libelf1 (= 0.176-1.1),
libev-perl (= 4.27-1),
libevent-perl (= 1.27-1),
libfdisk1 (= 2.33.1-0.1),
libffi6 (= 3.2.1-9),
libfile-stripnondeterminism-perl (= 1.4.0-1),
libgcc-8-dev (= 8.3.0-6+rpi1),
libgcc1 (= 1:8.3.0-6+rpi1),
libgcrypt20 (= 1.8.4-5),
libgdbm-compat4 (= 1.18.1-4),
libgdbm6 (= 1.18.1-4),
libglib2.0-0 (= 2.60.6-1),
libgmp10 (= 2:6.1.2+dfsg-4),
libgomp1 (= 8.3.0-6+rpi1),
libgpg-error0 (= 1.35-1),
libguard-perl (= 1.023-1+b4),
libicu63 (= 63.2-2),
libisl19 (= 0.20-2),
liblz4-1 (= 1.8.3-1),
liblzma5 (= 5.2.4-1),
libmagic-mgc (= 1:5.37-5),
libmagic1 (= 1:5.37-5),
libmount1 (= 2.33.1-0.1),
libmpc3 (= 1.1.0-1),
libmpfr6 (= 4.0.2-1),
libncurses6 (= 6.1+20190713-2),
libncursesw6 (= 6.1+20190713-2),
libpam-modules (= 1.3.1-5),
libpam-modules-bin (= 1.3.1-5),
libpam-runtime (= 1.3.1-5),
libpam0g (= 1.3.1-5),
libpcre3 (= 2:8.39-12),
libperl5.28 (= 5.28.1-6),
libpipeline1 (= 1.5.1-2),
libseccomp2 (= 2.3.3-4),
libselinux1 (= 2.8-1+b1),
libsigsegv2 (= 2.12-2),
libsmartcols1 (= 2.33.1-0.1),
libstdc++-8-dev (= 8.3.0-6+rpi1),
libstdc++6 (= 8.3.0-6+rpi1),
libsub-override-perl (= 0.09-2),
libsystemd0 (= 241-5+rpi1),
libtinfo5 (= 6.1+20190713-2),
libtinfo6 (= 6.1+20190713-2),
libtool (= 2.4.6-9),
libubsan1 (= 8.3.0-6+rpi1),
libuchardet0 (= 0.0.6-3),
libudev1 (= 241-5+rpi1),
libunistring2 (= 0.9.10-1),
libuuid1 (= 2.33.1-0.1),
libxml2 (= 2.9.4+dfsg1-7+b2),
linux-libc-dev (= 4.18.20-2+rpi1),
login (= 1:4.5-1.1),
m4 (= 1.4.18-2),
make (= 4.2.1-1.2),
man-db (= 2.8.6.1-1),
mawk (= 1.3.3-17),
ncurses-base (= 6.1+20181013-2),
ncurses-bin (= 6.1+20181013-2),
patch (= 2.7.6-3),
perl (= 5.28.1-6),
perl-base (= 5.28.1-6),
perl-modules-5.28 (= 5.28.1-6),
po-debconf (= 1.0.21),
sed (= 4.7-1),
sensible-utils (= 0.0.12),
sysvinit-utils (= 2.93-8),
tar (= 1.30+dfsg-6),
util-linux (= 2.33.1-0.1),
xz-utils (= 5.2.4-1),
zlib1g (= 1:1.2.11.dfsg-1)
Environment:
DEB_BUILD_OPTIONS="parallel=4"
LANG="en_GB.UTF-8"
LC_ALL="POSIX"
SOURCE_DATE_EPOCH="1565549794"
+------------------------------------------------------------------------------+
| Package contents |
+------------------------------------------------------------------------------+
libcoro-perl-dbgsym_6.550-1_armhf.deb
-------------------------------------
new Debian package, version 2.0.
size 165544 bytes: control archive=704 bytes.
481 bytes, 13 lines control
410 bytes, 4 lines md5sums
Package: libcoro-perl-dbgsym
Source: libcoro-perl
Version: 6.550-1
Auto-Built-Package: debug-symbols
Architecture: armhf
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Installed-Size: 201
Depends: libcoro-perl (= 6.550-1)
Section: debug
Priority: optional
Multi-Arch: same
Description: debug symbols for libcoro-perl
Build-Ids: 1da92fd1ce3fc42bd551a7e4cc278e9e6c66cae7 5b48a74054bdf82e9abb5ccbbd442946d814d81c c710afdbc6183485f4e52d0a3c772f99e8000274
drwxr-xr-x root/root 0 2019-08-11 18:56 ./
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/lib/
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/lib/debug/
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/lib/debug/.build-id/
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/lib/debug/.build-id/1d/
-rw-r--r-- root/root 135532 2019-08-11 18:56 ./usr/lib/debug/.build-id/1d/a92fd1ce3fc42bd551a7e4cc278e9e6c66cae7.debug
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/lib/debug/.build-id/5b/
-rw-r--r-- root/root 18412 2019-08-11 18:56 ./usr/lib/debug/.build-id/5b/48a74054bdf82e9abb5ccbbd442946d814d81c.debug
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/lib/debug/.build-id/c7/
-rw-r--r-- root/root 12304 2019-08-11 18:56 ./usr/lib/debug/.build-id/c7/10afdbc6183485f4e52d0a3c772f99e8000274.debug
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/lib/debug/.dwz/
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/lib/debug/.dwz/arm-linux-gnueabihf/
-rw-r--r-- root/root 23516 2019-08-11 18:56 ./usr/lib/debug/.dwz/arm-linux-gnueabihf/libcoro-perl.debug
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/share/
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/share/doc/
lrwxrwxrwx root/root 0 2019-08-11 18:56 ./usr/share/doc/libcoro-perl-dbgsym -> libcoro-perl
libcoro-perl_6.550-1_armhf.deb
------------------------------
new Debian package, version 2.0.
size 219432 bytes: control archive=2888 bytes.
1560 bytes, 31 lines control
5400 bytes, 67 lines md5sums
Package: libcoro-perl
Version: 6.550-1
Architecture: armhf
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Installed-Size: 478
Depends: perl (>= 5.28.1-6), perlapi-5.28.1, libc6 (>= 2.4), libanyevent-perl, libcommon-sense-perl, libguard-perl
Recommends: libev-perl, libevent-perl, libio-aio-perl, libnet-http-perl
Section: perl
Priority: optional
Multi-Arch: same
Homepage: https://metacpan.org/release/Coro
Description: Perl framework implementing coroutines
Coro is a collection of modules which manages continuations in general, most
often in the form of cooperative threads (also called coros, or simply "coro"
in the documentation). They do not actually execute at the same time, even on
machines with multiple processors.
.
The specific flavor of thread offered by this module also guarantees you that
it will not switch between threads unless necessary. It switches at easily-
identified points in your program, so locking and parallel access are rarely
an issue, making threaded programming much safer and easier than using other
threading models.
.
Coro provides a full shared address space, which makes communication between
threads very easy. A parallel matrix multiplication benchmark runs over 300
times faster on a single core than perl's ithreads on a quad core using all
four cores.
.
This version of Coro has been patched by the Debian Project to provide
compatibility with Perl 5.22 and Perl 5.24. Please send bug reports to
Debian (<https://www.debian.org/Bugs/>) and not the original author.
drwxr-xr-x root/root 0 2019-08-11 18:56 ./
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/lib/
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/lib/arm-linux-gnueabihf/
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/lib/arm-linux-gnueabihf/perl5/
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/
-rw-r--r-- root/root 45557 2019-07-19 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro.pm
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/
-rw-r--r-- root/root 4936 2019-07-19 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/AIO.pm
-rw-r--r-- root/root 13590 2019-07-19 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/AnyEvent.pm
-rw-r--r-- root/root 1516 2019-07-19 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/BDB.pm
-rw-r--r-- root/root 4053 2019-07-19 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Channel.pm
-rw-r--r-- root/root 4677 2015-06-28 22:31 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/CoroAPI.h
-rw-r--r-- root/root 16457 2019-07-19 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Debug.pm
-rw-r--r-- root/root 2616 2019-07-19 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/EV.pm
-rw-r--r-- root/root 5430 2019-07-19 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Event.pm
-rw-r--r-- root/root 13820 2019-07-19 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Handle.pm
-rw-r--r-- root/root 26831 2019-08-11 18:56 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Intro.pod
-rw-r--r-- root/root 4016 2019-07-19 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/LWP.pm
-rw-r--r-- root/root 3750 2019-07-19 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/MakeMaker.pm
-rw-r--r-- root/root 2311 2019-07-19 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/RWLock.pm
-rw-r--r-- root/root 3782 2019-07-19 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Select.pm
-rw-r--r-- root/root 4408 2019-08-11 18:56 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Semaphore.pm
-rw-r--r-- root/root 4197 2019-07-19 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/SemaphoreSet.pm
-rw-r--r-- root/root 2294 2019-07-19 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Signal.pm
-rw-r--r-- root/root 5471 2019-07-19 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Socket.pm
-rw-r--r-- root/root 1828 2019-07-19 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Specific.pm
-rw-r--r-- root/root 19435 2019-07-19 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/State.pm
-rw-r--r-- root/root 3764 2019-07-19 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Storable.pm
-rw-r--r-- root/root 1657 2019-07-19 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Timer.pm
-rw-r--r-- root/root 5567 2019-07-19 15:29 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/Util.pm
-rwxr-xr-x root/root 2769 2019-08-11 18:56 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/jit-amd64-unix.pl
-rwxr-xr-x root/root 2977 2019-08-11 18:56 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/Coro/jit-x86-unix.pl
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/auto/
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/auto/Coro/
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/auto/Coro/EV/
-rw-r--r-- root/root 9640 2019-08-11 18:56 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/auto/Coro/EV/EV.so
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/auto/Coro/Event/
-rw-r--r-- root/root 9608 2019-08-11 18:56 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/auto/Coro/Event/Event.so
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/auto/Coro/State/
-rw-r--r-- root/root 67192 2019-08-11 18:56 ./usr/lib/arm-linux-gnueabihf/perl5/5.28/auto/Coro/State/State.so
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/share/
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/share/doc/
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/share/doc/libcoro-perl/
-rw-r--r-- root/root 227 2019-08-11 18:56 ./usr/share/doc/libcoro-perl/NEWS.Debian.gz
-rw-r--r-- root/root 277 2005-03-03 17:20 ./usr/share/doc/libcoro-perl/README
-rw-r--r-- root/root 1207 2008-03-02 16:10 ./usr/share/doc/libcoro-perl/README.linux-glibc
-rw-r--r-- root/root 3156 2019-08-11 18:56 ./usr/share/doc/libcoro-perl/changelog.Debian.gz
-rw-r--r-- root/root 24628 2019-07-19 15:28 ./usr/share/doc/libcoro-perl/changelog.gz
-rw-r--r-- root/root 6869 2019-08-11 18:56 ./usr/share/doc/libcoro-perl/copyright
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/share/doc/libcoro-perl/examples/
-rw-r--r-- root/root 1714 2019-08-11 18:56 ./usr/share/doc/libcoro-perl/examples/bench
-rw-r--r-- root/root 316 2019-08-11 18:56 ./usr/share/doc/libcoro-perl/examples/dns
-rw-r--r-- root/root 1222 2019-08-11 18:56 ./usr/share/doc/libcoro-perl/examples/event
-rw-r--r-- root/root 526 2019-08-11 18:56 ./usr/share/doc/libcoro-perl/examples/lwp
-rw-r--r-- root/root 8492 2019-08-11 18:56 ./usr/share/doc/libcoro-perl/examples/myhttpd
-rw-r--r-- root/root 618 2019-08-11 18:56 ./usr/share/doc/libcoro-perl/examples/prodcons1
-rw-r--r-- root/root 665 2019-08-11 18:56 ./usr/share/doc/libcoro-perl/examples/prodcons2
-rw-r--r-- root/root 620 2019-08-11 18:56 ./usr/share/doc/libcoro-perl/examples/prodcons3
-rw-r--r-- root/root 752 2019-08-11 18:56 ./usr/share/doc/libcoro-perl/examples/readline
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/share/man/
drwxr-xr-x root/root 0 2019-08-11 18:56 ./usr/share/man/man3/
-rw-r--r-- root/root 17624 2019-08-11 18:56 ./usr/share/man/man3/Coro.3pm.gz
-rw-r--r-- root/root 2924 2019-08-11 18:56 ./usr/share/man/man3/Coro::AIO.3pm.gz
-rw-r--r-- root/root 5475 2019-08-11 18:56 ./usr/share/man/man3/Coro::AnyEvent.3pm.gz
-rw-r--r-- root/root 1739 2019-08-11 18:56 ./usr/share/man/man3/Coro::BDB.3pm.gz
-rw-r--r-- root/root 2651 2019-08-11 18:56 ./usr/share/man/man3/Coro::Channel.3pm.gz
-rw-r--r-- root/root 3911 2019-08-11 18:56 ./usr/share/man/man3/Coro::Debug.3pm.gz
-rw-r--r-- root/root 2218 2019-08-11 18:56 ./usr/share/man/man3/Coro::EV.3pm.gz
-rw-r--r-- root/root 2869 2019-08-11 18:56 ./usr/share/man/man3/Coro::Event.3pm.gz
-rw-r--r-- root/root 3289 2019-08-11 18:56 ./usr/share/man/man3/Coro::Handle.3pm.gz
-rw-r--r-- root/root 11686 2019-08-11 18:56 ./usr/share/man/man3/Coro::Intro.3pm.gz
-rw-r--r-- root/root 2727 2019-08-11 18:56 ./usr/share/man/man3/Coro::LWP.3pm.gz
-rw-r--r-- root/root 2499 2019-08-11 18:56 ./usr/share/man/man3/Coro::MakeMaker.3pm.gz
-rw-r--r-- root/root 1740 2019-08-11 18:56 ./usr/share/man/man3/Coro::RWLock.3pm.gz
-rw-r--r-- root/root 2198 2019-08-11 18:56 ./usr/share/man/man3/Coro::Select.3pm.gz
-rw-r--r-- root/root 2672 2019-08-11 18:56 ./usr/share/man/man3/Coro::Semaphore.3pm.gz
-rw-r--r-- root/root 2219 2019-08-11 18:56 ./usr/share/man/man3/Coro::SemaphoreSet.3pm.gz
-rw-r--r-- root/root 1995 2019-08-11 18:56 ./usr/share/man/man3/Coro::Signal.3pm.gz
-rw-r--r-- root/root 2199 2019-08-11 18:56 ./usr/share/man/man3/Coro::Socket.3pm.gz
-rw-r--r-- root/root 1812 2019-08-11 18:56 ./usr/share/man/man3/Coro::Specific.3pm.gz
-rw-r--r-- root/root 8877 2019-08-11 18:56 ./usr/share/man/man3/Coro::State.3pm.gz
-rw-r--r-- root/root 2155 2019-08-11 18:56 ./usr/share/man/man3/Coro::Storable.3pm.gz
-rw-r--r-- root/root 1681 2019-08-11 18:56 ./usr/share/man/man3/Coro::Timer.3pm.gz
-rw-r--r-- root/root 2588 2019-08-11 18:56 ./usr/share/man/man3/Coro::Util.3pm.gz
+------------------------------------------------------------------------------+
| Post Build |
+------------------------------------------------------------------------------+
+------------------------------------------------------------------------------+
| Cleanup |
+------------------------------------------------------------------------------+
Purging /<<BUILDDIR>>
Not cleaning session: cloned chroot in use
+------------------------------------------------------------------------------+
| Summary |
+------------------------------------------------------------------------------+
Build Architecture: armhf
Build Type: any
Build-Space: 4312
Build-Time: 40
Distribution: bullseye-staging
Host Architecture: armhf
Install-Time: 268
Job: libcoro-perl_6.550-1
Machine Architecture: armhf
Package: libcoro-perl
Package-Time: 348
Source-Version: 6.550-1
Space: 4312
Status: successful
Version: 6.550-1
--------------------------------------------------------------------------------
Finished at 2019-08-14T07:58:00Z
Build needed 00:05:48, 4312k disk space