libcoro-perl →
6.490-1 →
armhf → 2016-05-28 19:07:31
sbuild (Debian sbuild) 0.66.0 (04 Oct 2015) on bm-wb-03
+==============================================================================+
| libcoro-perl 6.490-1 (armhf) 28 May 2016 18:58 |
+==============================================================================+
Package: libcoro-perl
Version: 6.490-1
Source Version: 6.490-1
Distribution: stretch-staging
Machine Architecture: armhf
Host Architecture: armhf
Build Architecture: armhf
I: NOTICE: Log filtering will replace 'build/libcoro-perl-Xu4lHG/libcoro-perl-6.490' with '<<PKGBUILDDIR>>'
I: NOTICE: Log filtering will replace 'build/libcoro-perl-Xu4lHG' with '<<BUILDDIR>>'
I: NOTICE: Log filtering will replace 'var/lib/schroot/mount/stretch-staging-armhf-sbuild-8206888b-137f-4f63-89de-658490c824fb' with '<<CHROOT>>'
+------------------------------------------------------------------------------+
| Update chroot |
+------------------------------------------------------------------------------+
Get:1 http://172.17.0.1/private stretch-staging InRelease [11.3 kB]
Get:2 http://172.17.0.1/private stretch-staging/main Sources [9003 kB]
Get:3 http://172.17.0.1/private stretch-staging/main armhf Packages [11.0 MB]
Fetched 20.0 MB in 22s (903 kB/s)
Reading package lists...
W: No sandbox user '_apt' on the system, can not drop privileges
+------------------------------------------------------------------------------+
| Fetch source files |
+------------------------------------------------------------------------------+
Check APT
---------
Checking available source versions...
Download source files with APT
------------------------------
Reading package lists...
NOTICE: 'libcoro-perl' packaging is maintained in the 'Git' version control system at:
https://anonscm.debian.org/git/pkg-perl/packages/libcoro-perl.git
Please use:
git clone https://anonscm.debian.org/git/pkg-perl/packages/libcoro-perl.git
to retrieve the latest (possibly unreleased) updates to the package.
Need to get 205 kB of source archives.
Get:1 http://172.17.0.1/private stretch-staging/main libcoro-perl 6.490-1 (dsc) [2270 B]
Get:2 http://172.17.0.1/private stretch-staging/main libcoro-perl 6.490-1 (tar) [192 kB]
Get:3 http://172.17.0.1/private stretch-staging/main libcoro-perl 6.490-1 (diff) [11.0 kB]
Fetched 205 kB in 0s (2575 kB/s)
Download complete and in download only mode
Check architectures
-------------------
Check dependencies
------------------
Merged Build-Depends: build-essential, fakeroot
Filtered Build-Depends: build-essential, fakeroot
dpkg-deb: building package 'sbuild-build-depends-core-dummy' in '/<<BUILDDIR>>/resolver-S2Adhk/apt_archive/sbuild-build-depends-core-dummy.deb'.
OK
Get:1 file:/<<BUILDDIR>>/resolver-S2Adhk/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-S2Adhk/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-S2Adhk/apt_archive ./ Release [2119 B]
Get:2 file:/<<BUILDDIR>>/resolver-S2Adhk/apt_archive ./ Release [2119 B]
Get:3 file:/<<BUILDDIR>>/resolver-S2Adhk/apt_archive ./ Release.gpg [299 B]
Get:3 file:/<<BUILDDIR>>/resolver-S2Adhk/apt_archive ./ Release.gpg [299 B]
Get:4 file:/<<BUILDDIR>>/resolver-S2Adhk/apt_archive ./ Sources [214 B]
Get:5 file:/<<BUILDDIR>>/resolver-S2Adhk/apt_archive ./ Packages [526 B]
Reading package lists...
W: No sandbox user '_apt' on the system, can not drop privileges
W: file:///<<BUILDDIR>>/resolver-S2Adhk/apt_archive/./Release.gpg: Signature by key 3493EC2B8E6DC280C121C60435506D9A48F77B2E uses weak digest algorithm (SHA1)
Reading package lists...
+------------------------------------------------------------------------------+
| Install core build dependencies (apt-based resolver) |
+------------------------------------------------------------------------------+
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
sbuild-build-depends-core-dummy
0 upgraded, 1 newly installed, 0 to remove and 32 not upgraded.
Need to get 0 B/764 B of archives.
After this operation, 0 B of additional disk space will be used.
Get:1 file:/<<BUILDDIR>>/resolver-S2Adhk/apt_archive ./ sbuild-build-depends-core-dummy 0.invalid.0 [764 B]
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package sbuild-build-depends-core-dummy.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 13842 files and directories currently installed.)
Preparing to unpack .../sbuild-build-depends-core-dummy.deb ...
Unpacking sbuild-build-depends-core-dummy (0.invalid.0) ...
Setting up sbuild-build-depends-core-dummy (0.invalid.0) ...
W: No sandbox user '_apt' on the system, can not drop privileges
Merged Build-Depends: debhelper (>= 9.20120312), libanyevent-perl, libcanary-stability-perl, libcommon-sense-perl, libev-perl, libevent-perl, libguard-perl, perl
Filtered Build-Depends: debhelper (>= 9.20120312), libanyevent-perl, libcanary-stability-perl, libcommon-sense-perl, libev-perl, libevent-perl, libguard-perl, perl
dpkg-deb: building package 'sbuild-build-depends-libcoro-perl-dummy' in '/<<BUILDDIR>>/resolver-OOPFSa/apt_archive/sbuild-build-depends-libcoro-perl-dummy.deb'.
OK
Get:1 file:/<<BUILDDIR>>/resolver-OOPFSa/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-OOPFSa/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-OOPFSa/apt_archive ./ Release [2119 B]
Get:2 file:/<<BUILDDIR>>/resolver-OOPFSa/apt_archive ./ Release [2119 B]
Get:3 file:/<<BUILDDIR>>/resolver-OOPFSa/apt_archive ./ Release.gpg [299 B]
Get:3 file:/<<BUILDDIR>>/resolver-OOPFSa/apt_archive ./ Release.gpg [299 B]
Get:4 file:/<<BUILDDIR>>/resolver-OOPFSa/apt_archive ./ Sources [267 B]
Get:5 file:/<<BUILDDIR>>/resolver-OOPFSa/apt_archive ./ Packages [586 B]
Reading package lists...
W: No sandbox user '_apt' on the system, can not drop privileges
W: file:///<<BUILDDIR>>/resolver-OOPFSa/apt_archive/./Release.gpg: Signature by key 3493EC2B8E6DC280C121C60435506D9A48F77B2E uses weak digest algorithm (SHA1)
Reading package lists...
+------------------------------------------------------------------------------+
| Install libcoro-perl build dependencies (apt-based resolver) |
+------------------------------------------------------------------------------+
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
autoconf automake autopoint autotools-dev bsdmainutils debhelper
dh-autoreconf dh-strip-nondeterminism file gettext gettext-base groff-base
intltool-debian libanyevent-perl libarchive-zip-perl libbsd0
libcanary-stability-perl libcommon-sense-perl libcroco3 libev-perl
libevent-perl libffi6 libfile-stripnondeterminism-perl libglib2.0-0
libguard-perl libicu55 libmagic1 libpipeline1 libsigsegv2 libtimedate-perl
libtool libunistring0 libxml2 m4 man-db po-debconf
Suggested packages:
autoconf-archive gnu-standards autoconf-doc wamerican | wordlist whois
vacation dh-make gettext-doc libasprintf-dev libgettextpo-dev groff
libio-async-perl libjson-perl | libjson-xs-perl libnet-ssleay-perl
libpoe-perl libtask-weaken-perl libtool-doc gfortran | fortran95-compiler
gcj-jdk less www-browser libmail-box-perl
Recommended packages:
curl | wget | lynx-cur libasync-interrupt-perl libglib2.0-data
shared-mime-info xdg-user-dirs libltdl-dev xml-core libmail-sendmail-perl
The following NEW packages will be installed:
autoconf automake autopoint autotools-dev bsdmainutils debhelper
dh-autoreconf dh-strip-nondeterminism file gettext gettext-base groff-base
intltool-debian libanyevent-perl libarchive-zip-perl libbsd0
libcanary-stability-perl libcommon-sense-perl libcroco3 libev-perl
libevent-perl libffi6 libfile-stripnondeterminism-perl libglib2.0-0
libguard-perl libicu55 libmagic1 libpipeline1 libsigsegv2 libtimedate-perl
libtool libunistring0 libxml2 m4 man-db po-debconf
sbuild-build-depends-libcoro-perl-dummy
0 upgraded, 37 newly installed, 0 to remove and 32 not upgraded.
Need to get 11.3 MB/19.5 MB of archives.
After this operation, 65.5 MB of additional disk space will be used.
Get:1 file:/<<BUILDDIR>>/resolver-OOPFSa/apt_archive ./ sbuild-build-depends-libcoro-perl-dummy 0.invalid.0 [826 B]
Get:2 http://172.17.0.1/private stretch-staging/main armhf groff-base armhf 1.22.3-7 [1083 kB]
Get:3 http://172.17.0.1/private stretch-staging/main armhf libbsd0 armhf 0.8.3-1 [89.0 kB]
Get:4 http://172.17.0.1/private stretch-staging/main armhf bsdmainutils armhf 9.0.10 [177 kB]
Get:5 http://172.17.0.1/private stretch-staging/main armhf libpipeline1 armhf 1.4.1-2 [23.7 kB]
Get:6 http://172.17.0.1/private stretch-staging/main armhf man-db armhf 2.7.5-1 [975 kB]
Get:7 http://172.17.0.1/private stretch-staging/main armhf libunistring0 armhf 0.9.3-5.2 [253 kB]
Get:8 http://172.17.0.1/private stretch-staging/main armhf libmagic1 armhf 1:5.25-2 [250 kB]
Get:9 http://172.17.0.1/private stretch-staging/main armhf file armhf 1:5.25-2 [61.2 kB]
Get:10 http://172.17.0.1/private stretch-staging/main armhf gettext-base armhf 0.19.7-2 [111 kB]
Get:11 http://172.17.0.1/private stretch-staging/main armhf libsigsegv2 armhf 2.10-5 [28.4 kB]
Get:12 http://172.17.0.1/private stretch-staging/main armhf m4 armhf 1.4.17-5 [239 kB]
Get:13 http://172.17.0.1/private stretch-staging/main armhf autoconf all 2.69-10 [338 kB]
Get:14 http://172.17.0.1/private stretch-staging/main armhf autotools-dev all 20160430.1 [72.6 kB]
Get:15 http://172.17.0.1/private stretch-staging/main armhf automake all 1:1.15-4 [735 kB]
Get:16 http://172.17.0.1/private stretch-staging/main armhf autopoint all 0.19.7-2 [424 kB]
Get:17 http://172.17.0.1/private stretch-staging/main armhf libglib2.0-0 armhf 2.48.1-1 [2548 kB]
Get:18 http://172.17.0.1/private stretch-staging/main armhf libcroco3 armhf 0.6.11-1 [131 kB]
Get:19 http://172.17.0.1/private stretch-staging/main armhf gettext armhf 0.19.7-2 [1400 kB]
Get:20 http://172.17.0.1/private stretch-staging/main armhf intltool-debian all 0.35.0+20060710.4 [26.3 kB]
Get:21 http://172.17.0.1/private stretch-staging/main armhf po-debconf all 1.0.19 [249 kB]
Get:22 http://172.17.0.1/private stretch-staging/main armhf libarchive-zip-perl all 1.57-1 [95.1 kB]
Get:23 http://172.17.0.1/private stretch-staging/main armhf libfile-stripnondeterminism-perl all 0.016-1 [11.9 kB]
Get:24 http://172.17.0.1/private stretch-staging/main armhf libtimedate-perl all 2.3000-2 [42.2 kB]
Get:25 http://172.17.0.1/private stretch-staging/main armhf dh-strip-nondeterminism all 0.016-1 [6998 B]
Get:26 http://172.17.0.1/private stretch-staging/main armhf libtool all 2.4.6-0.1 [200 kB]
Get:27 http://172.17.0.1/private stretch-staging/main armhf dh-autoreconf all 12 [15.8 kB]
Get:28 http://172.17.0.1/private stretch-staging/main armhf debhelper all 9.20160403 [800 kB]
Get:29 http://172.17.0.1/private stretch-staging/main armhf libanyevent-perl armhf 7.110-1+rpi1 [391 kB]
Get:30 http://172.17.0.1/private stretch-staging/main armhf libcanary-stability-perl armhf 2006-1 [8726 B]
Get:31 http://172.17.0.1/private stretch-staging/main armhf libcommon-sense-perl armhf 3.74-1+b2 [23.9 kB]
Get:32 http://172.17.0.1/private stretch-staging/main armhf libev-perl armhf 4.22-1 [232 kB]
Get:33 http://172.17.0.1/private stretch-staging/main armhf libevent-perl armhf 1.24-1+b1 [260 kB]
Get:34 http://172.17.0.1/private stretch-staging/main armhf libguard-perl armhf 1.023-1+b1 [15.5 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 11.3 MB in 1s (8220 kB/s)
Selecting previously unselected package groff-base.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 13842 files and directories currently installed.)
Preparing to unpack .../groff-base_1.22.3-7_armhf.deb ...
Unpacking groff-base (1.22.3-7) ...
Selecting previously unselected package libbsd0:armhf.
Preparing to unpack .../libbsd0_0.8.3-1_armhf.deb ...
Unpacking libbsd0:armhf (0.8.3-1) ...
Selecting previously unselected package bsdmainutils.
Preparing to unpack .../bsdmainutils_9.0.10_armhf.deb ...
Unpacking bsdmainutils (9.0.10) ...
Selecting previously unselected package libpipeline1:armhf.
Preparing to unpack .../libpipeline1_1.4.1-2_armhf.deb ...
Unpacking libpipeline1:armhf (1.4.1-2) ...
Selecting previously unselected package man-db.
Preparing to unpack .../man-db_2.7.5-1_armhf.deb ...
Unpacking man-db (2.7.5-1) ...
Selecting previously unselected package libunistring0:armhf.
Preparing to unpack .../libunistring0_0.9.3-5.2_armhf.deb ...
Unpacking libunistring0:armhf (0.9.3-5.2) ...
Selecting previously unselected package libmagic1:armhf.
Preparing to unpack .../libmagic1_1%3a5.25-2_armhf.deb ...
Unpacking libmagic1:armhf (1:5.25-2) ...
Selecting previously unselected package file.
Preparing to unpack .../file_1%3a5.25-2_armhf.deb ...
Unpacking file (1:5.25-2) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../gettext-base_0.19.7-2_armhf.deb ...
Unpacking gettext-base (0.19.7-2) ...
Selecting previously unselected package libicu55:armhf.
Preparing to unpack .../libicu55_55.1-7_armhf.deb ...
Unpacking libicu55:armhf (55.1-7) ...
Selecting previously unselected package libxml2:armhf.
Preparing to unpack .../libxml2_2.9.3+dfsg1-1_armhf.deb ...
Unpacking libxml2:armhf (2.9.3+dfsg1-1) ...
Selecting previously unselected package libsigsegv2:armhf.
Preparing to unpack .../libsigsegv2_2.10-5_armhf.deb ...
Unpacking libsigsegv2:armhf (2.10-5) ...
Selecting previously unselected package m4.
Preparing to unpack .../archives/m4_1.4.17-5_armhf.deb ...
Unpacking m4 (1.4.17-5) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../autoconf_2.69-10_all.deb ...
Unpacking autoconf (2.69-10) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../autotools-dev_20160430.1_all.deb ...
Unpacking autotools-dev (20160430.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../automake_1%3a1.15-4_all.deb ...
Unpacking automake (1:1.15-4) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../autopoint_0.19.7-2_all.deb ...
Unpacking autopoint (0.19.7-2) ...
Selecting previously unselected package libffi6:armhf.
Preparing to unpack .../libffi6_3.2.1-4_armhf.deb ...
Unpacking libffi6:armhf (3.2.1-4) ...
Selecting previously unselected package libglib2.0-0:armhf.
Preparing to unpack .../libglib2.0-0_2.48.1-1_armhf.deb ...
Unpacking libglib2.0-0:armhf (2.48.1-1) ...
Selecting previously unselected package libcroco3:armhf.
Preparing to unpack .../libcroco3_0.6.11-1_armhf.deb ...
Unpacking libcroco3:armhf (0.6.11-1) ...
Selecting previously unselected package gettext.
Preparing to unpack .../gettext_0.19.7-2_armhf.deb ...
Unpacking gettext (0.19.7-2) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../intltool-debian_0.35.0+20060710.4_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.4) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../po-debconf_1.0.19_all.deb ...
Unpacking po-debconf (1.0.19) ...
Selecting previously unselected package libarchive-zip-perl.
Preparing to unpack .../libarchive-zip-perl_1.57-1_all.deb ...
Unpacking libarchive-zip-perl (1.57-1) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../libfile-stripnondeterminism-perl_0.016-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (0.016-1) ...
Selecting previously unselected package libtimedate-perl.
Preparing to unpack .../libtimedate-perl_2.3000-2_all.deb ...
Unpacking libtimedate-perl (2.3000-2) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../dh-strip-nondeterminism_0.016-1_all.deb ...
Unpacking dh-strip-nondeterminism (0.016-1) ...
Selecting previously unselected package libtool.
Preparing to unpack .../libtool_2.4.6-0.1_all.deb ...
Unpacking libtool (2.4.6-0.1) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../dh-autoreconf_12_all.deb ...
Unpacking dh-autoreconf (12) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../debhelper_9.20160403_all.deb ...
Unpacking debhelper (9.20160403) ...
Selecting previously unselected package libanyevent-perl.
Preparing to unpack .../libanyevent-perl_7.110-1+rpi1_armhf.deb ...
Unpacking libanyevent-perl (7.110-1+rpi1) ...
Selecting previously unselected package libcanary-stability-perl.
Preparing to unpack .../libcanary-stability-perl_2006-1_armhf.deb ...
Unpacking libcanary-stability-perl (2006-1) ...
Selecting previously unselected package libcommon-sense-perl.
Preparing to unpack .../libcommon-sense-perl_3.74-1+b2_armhf.deb ...
Unpacking libcommon-sense-perl (3.74-1+b2) ...
Selecting previously unselected package libev-perl.
Preparing to unpack .../libev-perl_4.22-1_armhf.deb ...
Unpacking libev-perl (4.22-1) ...
Selecting previously unselected package libevent-perl.
Preparing to unpack .../libevent-perl_1.24-1+b1_armhf.deb ...
Unpacking libevent-perl (1.24-1+b1) ...
Selecting previously unselected package libguard-perl.
Preparing to unpack .../libguard-perl_1.023-1+b1_armhf.deb ...
Unpacking libguard-perl (1.023-1+b1) ...
Selecting previously unselected package sbuild-build-depends-libcoro-perl-dummy.
Preparing to unpack .../sbuild-build-depends-libcoro-perl-dummy.deb ...
Unpacking sbuild-build-depends-libcoro-perl-dummy (0.invalid.0) ...
Processing triggers for libc-bin (2.22-7) ...
Setting up groff-base (1.22.3-7) ...
Setting up libbsd0:armhf (0.8.3-1) ...
Setting up bsdmainutils (9.0.10) ...
update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode
update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode
Setting up libpipeline1:armhf (1.4.1-2) ...
Setting up man-db (2.7.5-1) ...
Not building database; man-db/auto-update is not 'true'.
Setting up libunistring0:armhf (0.9.3-5.2) ...
Setting up libmagic1:armhf (1:5.25-2) ...
Setting up file (1:5.25-2) ...
Setting up gettext-base (0.19.7-2) ...
Setting up libicu55:armhf (55.1-7) ...
Setting up libxml2:armhf (2.9.3+dfsg1-1) ...
Setting up libsigsegv2:armhf (2.10-5) ...
Setting up m4 (1.4.17-5) ...
Setting up autoconf (2.69-10) ...
Setting up autotools-dev (20160430.1) ...
Setting up automake (1:1.15-4) ...
update-alternatives: using /usr/bin/automake-1.15 to provide /usr/bin/automake (automake) in auto mode
Setting up autopoint (0.19.7-2) ...
Setting up libffi6:armhf (3.2.1-4) ...
Setting up libglib2.0-0:armhf (2.48.1-1) ...
No schema files found: doing nothing.
Setting up libcroco3:armhf (0.6.11-1) ...
Setting up gettext (0.19.7-2) ...
Setting up intltool-debian (0.35.0+20060710.4) ...
Setting up po-debconf (1.0.19) ...
Setting up libarchive-zip-perl (1.57-1) ...
Setting up libfile-stripnondeterminism-perl (0.016-1) ...
Setting up libtimedate-perl (2.3000-2) ...
Setting up libtool (2.4.6-0.1) ...
Setting up libanyevent-perl (7.110-1+rpi1) ...
Setting up libcanary-stability-perl (2006-1) ...
Setting up libcommon-sense-perl (3.74-1+b2) ...
Setting up libev-perl (4.22-1) ...
Setting up libevent-perl (1.24-1+b1) ...
Setting up libguard-perl (1.023-1+b1) ...
Setting up dh-autoreconf (12) ...
Setting up debhelper (9.20160403) ...
Setting up sbuild-build-depends-libcoro-perl-dummy (0.invalid.0) ...
Setting up dh-strip-nondeterminism (0.016-1) ...
Processing triggers for libc-bin (2.22-7) ...
W: No sandbox user '_apt' on the system, can not drop privileges
+------------------------------------------------------------------------------+
| Build environment |
+------------------------------------------------------------------------------+
Kernel: Linux 3.19.0-trunk-armmp armhf (armv7l)
Toolchain package versions: binutils_2.26-8 dpkg-dev_1.18.7 g++-5_5.3.1-19 gcc-5_5.3.1-19 libc6-dev_2.22-7 libstdc++-5-dev_5.3.1-19 libstdc++6_6.1.1-1+rpi1 linux-libc-dev_3.18.5-1~exp1+rpi19+stretch
Package versions: adduser_3.114 apt_1.2.12 autoconf_2.69-10 automake_1:1.15-4 autopoint_0.19.7-2 autotools-dev_20160430.1 base-files_9.6+rpi1 base-passwd_3.5.39 bash_4.3-14 binutils_2.26-8 bsdmainutils_9.0.10 bsdutils_1:2.28-5 build-essential_11.7 bzip2_1.0.6-8 console-setup_1.142 console-setup-linux_1.142 coreutils_8.25-2 cpio_2.11+dfsg-5 cpp_4:5.3.1-1+rpi1 cpp-5_5.3.1-19 dash_0.5.8-2.2 debconf_1.5.59 debfoster_2.7-2 debhelper_9.20160403 debianutils_4.7 dh-autoreconf_12 dh-strip-nondeterminism_0.016-1 diffutils_1:3.3-3 dmsetup_2:1.02.124-1 dpkg_1.18.7 dpkg-dev_1.18.7 e2fslibs_1.43~WIP.2016.03.15-2 e2fsprogs_1.43~WIP.2016.03.15-2 fakeroot_1.20.2-1 file_1:5.25-2 findutils_4.6.0+git+20160126-2 g++_4:5.3.1-1+rpi1 g++-5_5.3.1-19 gcc_4:5.3.1-1+rpi1 gcc-4.6-base_4.6.4-5+rpi1 gcc-4.7-base_4.7.3-11+rpi1 gcc-4.8-base_4.8.5-4 gcc-4.9-base_4.9.3-14 gcc-5_5.3.1-19 gcc-5-base_5.3.1-19 gcc-6-base_6.1.1-1+rpi1 gettext_0.19.7-2 gettext-base_0.19.7-2 gnupg_1.4.20-6 gpgv_1.4.20-6 grep_2.25-1 groff-base_1.22.3-7 gzip_1.6-5 hostname_3.17 ifupdown_0.8.11 init_1.33 init-system-helpers_1.33 initscripts_2.88dsf-59.4 insserv_1.14.0-5.3 intltool-debian_0.35.0+20060710.4 iproute2_4.3.0-1 kbd_2.0.3-2 keyboard-configuration_1.142 klibc-utils_2.0.4-8+rpi1 kmod_22-1.1 libacl1_2.2.52-3 libanyevent-perl_7.110-1+rpi1 libapparmor1_2.10-4 libapt-pkg5.0_1.2.12 libarchive-zip-perl_1.57-1 libasan2_5.3.1-19 libatm1_1:2.5.1-1.5 libatomic1_6.1.1-1+rpi1 libattr1_1:2.4.47-2 libaudit-common_1:2.5.2-1+rpi1 libaudit1_1:2.5.2-1+rpi1 libblkid1_2.28-5 libbsd0_0.8.3-1 libbz2-1.0_1.0.6-8 libc-bin_2.22-7 libc-dev-bin_2.22-7 libc6_2.22-7 libc6-dev_2.22-7 libcanary-stability-perl_2006-1 libcap2_1:2.24-12 libcap2-bin_1:2.24-12 libcc1-0_6.1.1-1+rpi1 libcomerr2_1.43~WIP.2016.03.15-2 libcommon-sense-perl_3.74-1+b2 libcroco3_0.6.11-1 libcryptsetup4_2:1.7.0-2 libdb5.3_5.3.28-11 libdbus-1-3_1.10.8-1 libdebconfclient0_0.210 libdevmapper1.02.1_2:1.02.124-1 libdpkg-perl_1.18.7 libdrm2_2.4.68-1 libev-perl_4.22-1 libevent-perl_1.24-1+b1 libfakeroot_1.20.2-1 libfdisk1_2.28-5 libffi6_3.2.1-4 libfile-stripnondeterminism-perl_0.016-1 libgc1c2_1:7.4.2-7.4 libgcc-5-dev_5.3.1-19 libgcc1_1:6.1.1-1+rpi1 libgcrypt20_1.7.0-2 libgdbm3_1.8.3-13.1 libglib2.0-0_2.48.1-1 libgmp10_2:6.1.0+dfsg-2 libgomp1_6.1.1-1+rpi1 libgpg-error0_1.22-2 libguard-perl_1.023-1+b1 libicu55_55.1-7 libisl15_0.16.1-1 libklibc_2.0.4-8+rpi1 libkmod2_22-1.1 liblocale-gettext-perl_1.07-1+b1 liblz4-1_0.0~r131-2 liblzma5_5.1.1alpha+20120614-2.1 libmagic1_1:5.25-2 libmount1_2.28-5 libmpc3_1.0.3-1 libmpfr4_3.1.4-1 libncurses5_6.0+20160319-1 libncursesw5_6.0+20160319-1 libpam-modules_1.1.8-3.2 libpam-modules-bin_1.1.8-3.2 libpam-runtime_1.1.8-3.2 libpam0g_1.1.8-3.2 libpcre3_2:8.38-3.1 libperl5.22_5.22.2-1 libpipeline1_1.4.1-2 libplymouth4_0.9.2-3 libpng12-0_1.2.54-6 libprocps5_2:3.3.11-3 libreadline6_6.3-8+b3 libseccomp2_2.3.0-1 libselinux1_2.5-2 libsemanage-common_2.5-1 libsemanage1_2.5-1 libsepol1_2.5-1 libsigsegv2_2.10-5 libsmartcols1_2.28-5 libss2_1.43~WIP.2016.03.15-2 libstdc++-5-dev_5.3.1-19 libstdc++6_6.1.1-1+rpi1 libsystemd0_229-5 libtimedate-perl_2.3000-2 libtinfo5_6.0+20160319-1 libtool_2.4.6-0.1 libubsan0_6.1.1-1+rpi1 libudev1_229-5 libunistring0_0.9.3-5.2 libusb-0.1-4_2:0.1.12-30 libustr-1.0-1_1.0.4-5 libuuid1_2.28-5 libxml2_2.9.3+dfsg1-1 linux-libc-dev_3.18.5-1~exp1+rpi19+stretch login_1:4.2-3.1 lsb-base_9.20160110+rpi1 m4_1.4.17-5 make_4.1-9 makedev_2.3.1-93 man-db_2.7.5-1 manpages_4.06-1 mawk_1.3.3-17 mount_2.28-5 multiarch-support_2.22-7 ncurses-base_6.0+20160319-1 ncurses-bin_6.0+20160319-1 netbase_5.3 passwd_1:4.2-3.1 patch_2.7.5-1 perl_5.22.2-1 perl-base_5.22.2-1 perl-modules-5.22_5.22.2-1 po-debconf_1.0.19 procps_2:3.3.11-3 psmisc_22.21-2.1 raspbian-archive-keyring_20120528.2 readline-common_6.3-8 sbuild-build-depends-core-dummy_0.invalid.0 sbuild-build-depends-libcoro-perl-dummy_0.invalid.0 sed_4.2.2-7.1 sensible-utils_0.0.9 startpar_0.59-3 systemd_229-5 systemd-sysv_229-5 sysv-rc_2.88dsf-59.4 sysvinit-utils_2.88dsf-59.4 tar_1.28-2.2+rpi1 tzdata_2016d-2 udev_229-5 util-linux_2.28-5 xkb-data_2.17-1 xz-utils_5.1.1alpha+20120614-2.1 zlib1g_1:1.2.8.dfsg-2+b1
+------------------------------------------------------------------------------+
| Build |
+------------------------------------------------------------------------------+
Unpack source
-------------
gpgv: keyblock resource `/sbuild-nonexistent/.gnupg/trustedkeys.gpg': file open error
gpgv: Signature made Sun May 22 13:28:48 2016 UTC using RSA key ID 4D694FB2
gpgv: Can't check signature: public key not found
dpkg-source: warning: failed to verify signature on ./libcoro-perl_6.490-1.dsc
dpkg-source: info: extracting libcoro-perl in libcoro-perl-6.490
dpkg-source: info: unpacking libcoro-perl_6.490.orig.tar.gz
dpkg-source: info: unpacking libcoro-perl_6.490-1.debian.tar.xz
dpkg-source: info: applying fix-wrong-path-for-interpreter.patch
dpkg-source: info: applying whatis.patch
dpkg-source: info: applying spelling.patch
dpkg-source: info: applying fix-ftbfs-with-longjmp.patch
dpkg-source: info: applying coro-5.22.patch
Check disc space
----------------
Sufficient free space for build
User Environment
----------------
DEB_BUILD_OPTIONS=parallel=4
HOME=/sbuild-nonexistent
LOGNAME=root
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
SCHROOT_ALIAS_NAME=stretch-staging-armhf-sbuild
SCHROOT_CHROOT_NAME=stretch-staging-armhf-sbuild
SCHROOT_COMMAND=env
SCHROOT_GID=109
SCHROOT_GROUP=buildd
SCHROOT_SESSION_ID=stretch-staging-armhf-sbuild-8206888b-137f-4f63-89de-658490c824fb
SCHROOT_UID=104
SCHROOT_USER=buildd
SHELL=/bin/sh
TERM=xterm
USER=buildd
dpkg-buildpackage
-----------------
dpkg-buildpackage: info: source package libcoro-perl
dpkg-buildpackage: info: source version 6.490-1
dpkg-buildpackage: info: source distribution unstable
dpkg-source --before-build libcoro-perl-6.490
dpkg-buildpackage: info: host architecture armhf
fakeroot debian/rules clean
dh clean
dh_testdir
dh_auto_clean
dh_clean
debian/rules build-arch
dh build-arch
dh_testdir -a
dh_update_autotools_config -a
dh_auto_configure -a
perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=arm-linux-gnueabihf-gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now"
***
*** The stability canary says: (nothing, it was driven away by harsh weather)
***
*** It seems you are running perl version 5.022002, likely the "official" or
*** "standard" version. While there is nothing wrong with doing that,
*** standard perl versions 5.022 and up are not supported by Coro.
*** While this might be fatal, it might also be all right - if you run into
*** problems, you might want to downgrade your perl or switch to the
*** stability branch.
***
*** If everything works fine, you can ignore this message.
***
*** Stability canary mini-FAQ:
***
*** Do I need to do anything?
*** With luck, no. While some distributions are known to fail
*** already, most should probably work. This message is here
*** to alert you that your perl is not supported by Coro,
*** and if things go wrong, you either need to downgrade, or
*** sidegrade to the stability variant of your perl version,
*** or simply live with the consequences.
***
*** What is this canary thing?
*** It's purpose is to check support status of Coro with
*** respect to your perl version.
***
*** What is this "stability branch"?
*** It's a branch or fork of the official perl, by schmorp, to
*** improve stability and compatibility with existing modules.
***
*** How can I skip this prompt on automated installs?
*** Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment.
*** More info is in the Canary::Stability manpage.
***
*** Long version of this FAQ: http://stableperl.schmorp.de/faq.html
*** Stability Branch homepage: http://stableperl.schmorp.de/
***
Continue anyways? [y] y
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Event version 1.24 found, building Event support.
EV version 4.22 found, building EV support.
Checking if your kit is complete...
Looks good
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro has a number of configuration options. Due to its maturity, the
defaults that Coro chooses are usually fine, so you can decide to skip
these questions. Only if something went wrong you should select 'n'
here and manually configure Coro, and, of course, report this to the
maintainer :)
Skip further questions and use defaults (y/n)? [y] y
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can use a number of methods to implement coroutines at the C
level. The default chosen is based on your current confguration and is
correct in most cases, but you still can chose between these alternatives:
u The unix 'ucontext.h' functions are relatively new and not implemented
or well-tested in older unices. They allow very fast coroutine creation
and reasonably fast switching. They are, however, usually slower than
the other alternatives due to an extra syscall done by swapcontext. And
while nominally most portable (it's the only POSIX-standardised
interface for coroutines), ucontext functions are, as usual, broken on
most/all BSDs.
s If the ucontext functions are not working or you don't want
to use them for other reasons you can try a workaround using
setjmp/longjmp/sigaltstack (also standard unix functions). Coroutine
creation is rather slow, but switching is very fast (often much faster
than with the ucontext functions). Unfortunately, glibc-2.1 and
below don't even feature a working sigaltstack. You cannot use this
implementation if some other code uses SIGUSR2 or you plan to create
coroutines from an alternative signal stack, as both are being used for
coroutine creation.
a Handcoded assembly. This is the fastest and most compatible method,
with the least side effects, if it works, that is. It has been tested
on GNU/Linux x86 and x86_64 systems and should work on all x86/x86_64
systems using the SVR ELF ABI (it is also reported to be working on
Strawberry Perl for Windows using MinGW). This is the recommended
method on supported platforms. When it doesn't work, use another
method, such as (s)etjmp/longjmp.
l GNU/Linux. Very old GNU/Linux systems (glibc-2.1 and below) need
this hack. Since it is very linux-specific it is also quite fast and
recommended even for newer versions; when it works, that is (currently
x86 and a few others only. If it compiles, it's usually ok). Newer
glibc versions (>= 2.5) stop working with this implementation however.
i IRIX. For some reason, SGI really does not like to follow POSIX (does
that surprise you?), so this workaround might be needed (it's fast),
although [s] and [u] should also work now.
w Microsoft Windows. Try this on Microsoft Windows when using Cygwin or
the MSVC compilers (e.g. ActiveState Perl, but see "a" for Strawberry
Perl), although, as there is no standard on how to do this under
windows, different environments might work differently. Doh.
f Microsoft Windows. Try this on Microsoft Windows if w fails. It is slower
and uses a lot more memory, but should be working all the time.
p Use pthread API. Try to avoid this option, it was only created to
make a point about the programming language shootout. It is unlikely
to work with perls that have windows process emulation enabled ("perl
threads"). It is also likely the slowest method of implementing
coroutines. It might work fine as a last resort, however, as the
pthread API is slightly better tested than ucontext functions for
example. Of course, not on BSDs, who usually have very broken pthread
implementations.
Coro tries hard to come up with a suitable default for most systems,
so pressing return at the prompt usually does the right thing. If you
experience problems (e.g. make test fails) then you should experiment with
this setting.
Use which implementation,
<s>etjmp, <u>ctx, <a>sm, <i>rix, <l>inux, <p>threads, <w>indows, <f>iber? [s] s
Using setjmp/longjmp/sigaltstack implementation
Trying to detect stack growth direction (for TEST_sigaltstack)
You might see some warnings, this should not concern you.
*****************************************************************************
If the testsuite fails PLEASE provide the following information
to Marc Lehmann <schmorp@schmorp.de>: operating system name, version,
architecture name and this string '(skaddr)|(sksize)'. Thanks a lot!
*****************************************************************************
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Per-context stack size factor: Depending on your settings, Coro tries to
share the C stacks is creates as much as possible, but sometimes it needs
to allocate a new one. This setting controls the maximum size that gets
allocated, and should not be set too high, as memory and address space
still is wasted even if it's not fully used. The value entered will be
multiplied by sizeof(void *), which is usually 4 on 32-bit systems, and 8
on 64-bit systems.
A setting of 16384 (the default) therefore corresponds to a 64k..128k
stack, which usually is ample space (you might even want to try 8192 or
lower if your program creates many coroutines).
On systems supporting mmap and dynamic memory management, the actual
memory usually gets allocated on demand, but with many large stacks you
can still run out of address space on your typical 32 bit platform (not to
forget the pagetables).
Some perls (mostly threaded ones and perl compiled under linux 2.6) and
some programs (inefficient regexes can use a lot of stack space) may
need much, much more: If Coro segfaults with weird backtraces (e.g. in a
function prologue) or in t/10_bugs.t, you might want to increase this to
65536 or more.
The default should be fine, and can be changed at runtime with
Coro::State::cctx_stacksize.
C stack size factor? [16384] 16384
using a stacksize of 16384 * sizeof(void*)
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can optionally put a guard area before each stack segment: When the
stack is too small and the access is not too far outside the stack (i.e.
within the guard area), then the program will safely segfault instead of
running into other data. The cost is some additional overhead with is
usually negligible, and extra use of address space.
The guard area size currently needs to be specified in pages (typical
pagesizes are 4k and 8k). The guard area is only enabled on a few
hardcoded architectures and is ignored on others. The actual preprocessor
expression disables this feature if:
!__i386 && !__x86_64 && !__powerpc && !__m68k
&& !__alpha && !__mips && !__sparc64
The default, as usual, should be just fine.
Number of guard pages (0 disables)? [4] 4
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can tell valgrind about its stacks and so reduce spurious warnings
where valgrind would otherwise complain about possible stack switches.
Enabling this does not incur noticable runtime or memory overhead, but it
requires that you have the <valgrind/valgrind.h> header file available.
Valgrind support is completely optional, so disabling it is the safe
choice.
Enable valgrind support (y/n)? [n] n
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can use (or even trick) some perl functions into doing what it needs
instead of relying on (some) of its own functions. This might increase
chances that it compiles and works, but it could just as well result in
memory leaks, crashes or silent data corruption. It certainly does result
in slightly slower speed and higher memory consumption, though, so YOU
SHOULD ENABLE THIS OPTION ONLY AS A LAST RESORT.
Prefer perl functions over coro functions (y/n)? [n] n
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can use a simple JIT compiler to compile a part of the thread switch
function at runtime. On perls with windows process emulation (most!),
this results in a 50% speed improvement. On sane perls, the gain is much
less, usually around 5%. If you enable this option, then the JIT will
be enabled, on compatible operating systems and CPUs (currently only
x86/amd64 on certain unix clones). Otherwise, it will be disabled. It
should be safe to leave on - this setting is only here so you can switch
it off in case of problems.
Note that some broken kernels (often calling themselves "hardened") break
all JIT generation by manipulating some system calls. If you get bus
errors or segmentation faults immediately when the JIT is enabled but not
without, then note that disabling the JIT only fixes some symptoms, not
the underlying problem, and you might run into other problems later.
Try to use the JIT compiler, if available? [y] y
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro has experimental support for cloning states. This can be used
to implement a scheme-like call/cc. However, this doesn't add to the
expressiveness in general, and is likely perl-version specific (and perl
5.12 deliberately removed support for it). As such, it is disabled by
default. Enable it when you want to play around with it, but note that it
isn't supported, and unlikely ever will be. It exists mainly to prove that
it could be done - if only it were useful for something.
Implement Coro::State->clone method (y/n)? [n] n
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Generating a Unix-style Makefile
Writing Makefile for Coro::State
Writing MYMETA.yml and MYMETA.json
Generating a Unix-style Makefile
Writing Makefile for Coro::Event
Writing MYMETA.yml and MYMETA.json
Generating a Unix-style Makefile
Writing Makefile for Coro::EV
Writing MYMETA.yml and MYMETA.json
Generating a Unix-style Makefile
Writing Makefile for Coro
Writing MYMETA.yml and MYMETA.json
dh_auto_build -a
make -j1
make[1]: Entering directory '/<<PKGBUILDDIR>>'
cp Coro/Util.pm blib/lib/Coro/Util.pm
cp Coro/State.pm blib/lib/Coro/State.pm
cp Coro/Select.pm blib/lib/Coro/Select.pm
cp Coro/CoroAPI.h blib/lib/Coro/CoroAPI.h
cp Coro/LWP.pm blib/lib/Coro/LWP.pm
cp Coro.pm blib/lib/Coro.pm
cp Coro/Timer.pm blib/lib/Coro/Timer.pm
cp Coro/Handle.pm blib/lib/Coro/Handle.pm
cp Coro/Signal.pm blib/lib/Coro/Signal.pm
cp Coro/AIO.pm blib/lib/Coro/AIO.pm
cp Coro/Channel.pm blib/lib/Coro/Channel.pm
cp Coro/jit-x86-unix.pl blib/lib/Coro/jit-x86-unix.pl
cp Coro/BDB.pm blib/lib/Coro/BDB.pm
cp Coro/jit-amd64-unix.pl blib/lib/Coro/jit-amd64-unix.pl
cp Coro/Specific.pm blib/lib/Coro/Specific.pm
cp Coro/Socket.pm blib/lib/Coro/Socket.pm
cp Coro/MakeMaker.pm blib/lib/Coro/MakeMaker.pm
cp Coro/AnyEvent.pm blib/lib/Coro/AnyEvent.pm
cp Coro/Debug.pm blib/lib/Coro/Debug.pm
cp Coro/SemaphoreSet.pm blib/lib/Coro/SemaphoreSet.pm
cp Coro/Storable.pm blib/lib/Coro/Storable.pm
cp Coro/Semaphore.pm blib/lib/Coro/Semaphore.pm
cp Coro/RWLock.pm blib/lib/Coro/RWLock.pm
make[2]: Entering directory '/<<PKGBUILDDIR>>/Coro'
Skip ../blib/lib/Coro/Select.pm (unchanged)
Skip ../blib/lib/Coro/Handle.pm (unchanged)
Skip ../blib/lib/Coro/AIO.pm (unchanged)
Skip ../blib/lib/Coro/Util.pm (unchanged)
Skip ../blib/lib/Coro/Signal.pm (unchanged)
Skip ../blib/lib/Coro/Specific.pm (unchanged)
Skip ../blib/lib/Coro/RWLock.pm (unchanged)
Skip ../blib/lib/Coro/BDB.pm (unchanged)
Skip ../blib/lib/Coro/Socket.pm (unchanged)
Skip ../blib/lib/Coro/jit-x86-unix.pl (unchanged)
Skip ../blib/lib/Coro/SemaphoreSet.pm (unchanged)
Skip ../blib/lib/Coro/Channel.pm (unchanged)
Skip ../blib/lib/Coro/Semaphore.pm (unchanged)
cp Intro.pod ../blib/lib/Coro/Intro.pod
Skip ../blib/lib/Coro/MakeMaker.pm (unchanged)
Skip ../blib/lib/Coro/AnyEvent.pm (unchanged)
Skip ../blib/lib/Coro/Debug.pm (unchanged)
Skip ../blib/lib/Coro/Storable.pm (unchanged)
Skip ../blib/lib/Coro/jit-amd64-unix.pl (unchanged)
Skip ../blib/lib/Coro/Timer.pm (unchanged)
Skip ../blib/lib/Coro/LWP.pm (unchanged)
Skip ../blib/lib/Coro/State.pm (unchanged)
Running Mkbootstrap for Coro::State ()
chmod 644 "State.bs"
"/usr/bin/perl" "/usr/share/perl/5.22.2/ExtUtils/xsubpp" -typemap "/usr/share/perl/5.22/ExtUtils/typemap" -typemap "typemap" State.xs > State.xsc && mv State.xsc State.c
Warning: Aliases 'is_zombie' and 'is_destroyed' have identical values in State.xs, line 3848
arm-linux-gnueabihf-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.49\" -DXS_VERSION=\"6.49\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.22/CORE" -DCORO_SJLJ -D_FORTIFY_SOURCE=0 -DCORO_STACKSIZE=16384 -DCORO_GUARDPAGES=4 -DCORO_JIT=1 State.c
<command-line>:0:0: warning: "_FORTIFY_SOURCE" redefined
<command-line>:0:0: note: this is the location of the previous definition
state.h: In function 'load_perl':
State.xs:761:37: warning: assignment from incompatible pointer type [-Wincompatible-pointer-types]
#define VARx(name,expr,type) expr = slot->name;
^
state.h:3:26: note: in expansion of macro 'VARx'
#define VAR(name,type) VARx(name, PL_ ## name, type)
^
state.h:85:1: note: in expansion of macro 'VAR'
VAR(comppad_name, AV *) /* variable names for "my" variables */
^
state.h: In function 'save_perl':
State.xs:909:45: warning: assignment from incompatible pointer type [-Wincompatible-pointer-types]
#define VARx(name,expr,type) slot->name = expr;
^
state.h:3:26: note: in expansion of macro 'VARx'
#define VAR(name,type) VARx(name, PL_ ## name, type)
^
state.h:85:1: note: in expansion of macro 'VAR'
VAR(comppad_name, AV *) /* variable names for "my" variables */
^
In file included from /usr/lib/arm-linux-gnueabihf/perl/5.22/CORE/perl.h:5546:0,
from State.xs:12:
State.xs: In function 'boot_Coro__State':
State.xs:4037:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
sv_setiv (sv, (IV)&coroapi);
^
/usr/lib/arm-linux-gnueabihf/perl/5.22/CORE/embed.h:652:46: note: in definition of macro 'sv_setiv'
#define sv_setiv(a,b) Perl_sv_setiv(aTHX_ a,b)
^
rm -f ../blib/arch/auto/Coro/State/State.so
arm-linux-gnueabihf-gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong State.o -o ../blib/arch/auto/Coro/State/State.so \
\
chmod 755 ../blib/arch/auto/Coro/State/State.so
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644
Manifying 20 pod documents
make[2]: Leaving directory '/<<PKGBUILDDIR>>/Coro'
make[2]: Entering directory '/<<PKGBUILDDIR>>/Event'
cp Event.pm ../blib/lib/Coro/Event.pm
Running Mkbootstrap for Coro::Event ()
chmod 644 "Event.bs"
"/usr/bin/perl" "/usr/share/perl/5.22.2/ExtUtils/xsubpp" -typemap "/usr/share/perl/5.22/ExtUtils/typemap" Event.xs > Event.xsc && mv Event.xsc Event.c
arm-linux-gnueabihf-gcc -c -I/usr/lib/arm-linux-gnueabihf/perl5/5.22/Event -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.49\" -DXS_VERSION=\"6.49\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.22/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 Event.c
In file included from Event.xs:8:0:
Event.xs: In function 'boot_Coro__Event':
/usr/lib/arm-linux-gnueabihf/perl5/5.22/Event/EventAPI.h:252:15: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
GEventAPI = (struct EventAPI*) SvIV(sv); \
^
Event.xs:82:9: note: in expansion of macro 'I_EVENT_API'
I_EVENT_API ("Coro::Event");
^
/usr/lib/arm-linux-gnueabihf/perl5/5.22/Event/EventAPI.h:254:11: warning: format '%d' expects argument of type 'int', but argument 2 has type 'I32 {aka long int}' [-Wformat=]
croak("Event::API version mismatch (%d != %d) -- please recompile %s", \
^
Event.xs:82:9: note: in expansion of macro 'I_EVENT_API'
I_EVENT_API ("Coro::Event");
^
In file included from Event.xs:9:0:
../Coro/CoroAPI.h:110:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
GCoroAPI = (struct CoroAPI*) SvIV (sv); \
^
Event.xs:83:2: note: in expansion of macro 'I_CORO_API'
I_CORO_API ("Coro::Event");
^
rm -f ../blib/arch/auto/Coro/Event/Event.so
arm-linux-gnueabihf-gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Event.o -o ../blib/arch/auto/Coro/Event/Event.so \
\
chmod 755 ../blib/arch/auto/Coro/Event/Event.so
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644
Manifying 1 pod document
make[2]: Leaving directory '/<<PKGBUILDDIR>>/Event'
make[2]: Entering directory '/<<PKGBUILDDIR>>/EV'
cp EV.pm ../blib/lib/Coro/EV.pm
Running Mkbootstrap for Coro::EV ()
chmod 644 "EV.bs"
"/usr/bin/perl" "/usr/share/perl/5.22.2/ExtUtils/xsubpp" -typemap "/usr/share/perl/5.22/ExtUtils/typemap" EV.xs > EV.xsc && mv EV.xsc EV.c
arm-linux-gnueabihf-gcc -c -I/usr/lib/arm-linux-gnueabihf/perl5/5.22/EV -I/usr/lib/arm-linux-gnueabihf/perl5/5.22 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.49\" -DXS_VERSION=\"6.49\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.22/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 EV.c
In file included from EV.xs:9:0:
EV.xs: In function 'boot_Coro__EV':
/usr/lib/arm-linux-gnueabihf/perl5/5.22/EV/EVAPI.h:195:12: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
GEVAPI = (struct EVAPI*) SvIV (sv); \
^
EV.xs:300:9: note: in expansion of macro 'I_EV_API'
I_EV_API ("Coro::EV");
^
In file included from EV.xs:10:0:
../Coro/CoroAPI.h:110:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
GCoroAPI = (struct CoroAPI*) SvIV (sv); \
^
EV.xs:301:2: note: in expansion of macro 'I_CORO_API'
I_CORO_API ("Coro::EV");
^
rm -f ../blib/arch/auto/Coro/EV/EV.so
arm-linux-gnueabihf-gcc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong EV.o -o ../blib/arch/auto/Coro/EV/EV.so \
\
chmod 755 ../blib/arch/auto/Coro/EV/EV.so
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644
Manifying 1 pod document
make[2]: Leaving directory '/<<PKGBUILDDIR>>/EV'
Manifying 20 pod documents
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_auto_test -a
make -j1 test TEST_VERBOSE=1
make[1]: Entering directory '/<<PKGBUILDDIR>>'
make[2]: Entering directory '/<<PKGBUILDDIR>>/Coro'
Running Mkbootstrap for Coro::State ()
chmod 644 "State.bs"
Manifying 20 pod documents
make[2]: Leaving directory '/<<PKGBUILDDIR>>/Coro'
make[2]: Entering directory '/<<PKGBUILDDIR>>/Event'
Running Mkbootstrap for Coro::Event ()
chmod 644 "Event.bs"
Manifying 1 pod document
make[2]: Leaving directory '/<<PKGBUILDDIR>>/Event'
make[2]: Entering directory '/<<PKGBUILDDIR>>/EV'
Running Mkbootstrap for Coro::EV ()
chmod 644 "EV.bs"
Manifying 1 pod document
make[2]: Leaving directory '/<<PKGBUILDDIR>>/EV'
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00_basic.t ..........
1..9
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok
t/01_process.t ........
1..13
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok
t/02_channel.t ........
1..19
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok 18
ok 19
ok
t/03_channel.t ........
1..10
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok
t/04_rwlock.t .........
1..15
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok
t/05_specific.t .......
1..8
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok
t/06_prio.t ...........
1..10
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok
t/07_eval.t ...........
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/08_join.t ...........
1..10
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok
t/10_bugs.t ...........
1..3
ok 1
ok 2
ok 3
ok
t/11_deadlock.t .......
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/12_exit.t ...........
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/13_diewarn.t ........
1..7
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok
t/14_load.t ...........
1..17
ok 1 # Coro::State ()
ok 2 # Coro ()
ok 3 # Coro::MakeMaker ()
ok 4 # Coro::Signal ()
ok 5 # Coro::Semaphore ()
ok 6 # Coro::SemaphoreSet ()
ok 7 # Coro::Channel ()
ok 8 # Coro::Specific ()
ok 9 # Coro::RWLock ()
ok 10 # Coro::AnyEvent ()
ok 11 # Coro::Timer ()
ok 12 # Coro::Util ()
ok 13 # Coro::Select ()
ok 14 # Coro::Handle ()
ok 15 # Coro::Socket ()
ok 16 # Coro::Storable ()
ok 17 # Coro::Debug ()
ok
t/15_semaphore.t ......
1..6
ok 1 # 998
ok 2
ok 3
ok 4
ok 5
ok 6
ok
t/16_signal.t .........
1..18
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok 18
ok
t/17_rouse.t ..........
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/18_winder.t .........
1..17
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok
t/19_handle.t .........
1..4
ok 1
ok 2
ok 3
ok 4
ok
t/20_mutual_cancel.t ..
1..10
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok
All tests successful.
Files=20, Tests=196, 4 wallclock secs ( 0.48 usr 0.07 sys + 2.74 cusr 0.35 csys = 3.64 CPU)
Result: PASS
make[2]: Entering directory '/<<PKGBUILDDIR>>/Coro'
No tests defined for Coro::State extension.
make[2]: Leaving directory '/<<PKGBUILDDIR>>/Coro'
make[2]: Entering directory '/<<PKGBUILDDIR>>/Event'
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, '../blib/lib', '../blib/arch')" t/*.t
t/00_basic.t ....
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/01_unblock.t ..
1..12
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok
All tests successful.
Files=2, Tests=17, 2 wallclock secs ( 0.15 usr 0.02 sys + 0.60 cusr 0.24 csys = 1.01 CPU)
Result: PASS
make[2]: Leaving directory '/<<PKGBUILDDIR>>/Event'
make[2]: Entering directory '/<<PKGBUILDDIR>>/EV'
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, '../blib/lib', '../blib/arch')" t/*.t
t/00_basic.t ....
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/01_unblock.t ..
1..12
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok
All tests successful.
Files=2, Tests=17, 1 wallclock secs ( 0.16 usr 0.01 sys + 0.55 cusr 0.19 csys = 0.91 CPU)
Result: PASS
make[2]: Leaving directory '/<<PKGBUILDDIR>>/EV'
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
fakeroot debian/rules binary-arch
dh binary-arch
dh_testroot -a
dh_prep -a
dh_auto_install -a
make -j1 install DESTDIR=/<<PKGBUILDDIR>>/debian/libcoro-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
make[1]: Entering directory '/<<PKGBUILDDIR>>'
make[2]: Entering directory '/<<PKGBUILDDIR>>/Coro'
Manifying 20 pod documents
make[2]: Leaving directory '/<<PKGBUILDDIR>>/Coro'
make[2]: Entering directory '/<<PKGBUILDDIR>>/Event'
Manifying 1 pod document
make[2]: Leaving directory '/<<PKGBUILDDIR>>/Event'
make[2]: Entering directory '/<<PKGBUILDDIR>>/EV'
Manifying 1 pod document
make[2]: Leaving directory '/<<PKGBUILDDIR>>/EV'
Manifying 20 pod documents
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/auto/Coro/State/State.so
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/auto/Coro/Event/Event.so
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/auto/Coro/EV/EV.so
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Util.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/State.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Select.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/CoroAPI.h
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/LWP.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Timer.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Handle.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Signal.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/AIO.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Channel.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/jit-x86-unix.pl
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/BDB.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/jit-amd64-unix.pl
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Specific.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Socket.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/MakeMaker.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/AnyEvent.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Debug.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/SemaphoreSet.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Storable.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Semaphore.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/RWLock.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Intro.pod
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Event.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/EV.pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::AIO.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::AnyEvent.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::BDB.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Channel.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Debug.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Handle.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Intro.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::LWP.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::MakeMaker.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::RWLock.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Select.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Semaphore.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::SemaphoreSet.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Signal.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Socket.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Specific.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::State.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Storable.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Timer.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Util.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::Event.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro::EV.3pm
Installing /<<PKGBUILDDIR>>/debian/libcoro-perl/usr/share/man/man3/Coro.3pm
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_installdocs -a
dh_installchangelogs -a
dh_installexamples -a
dh_installman -a
dh_perl -a
dh_link -a
dh_strip_nondeterminism -a
dh_compress -a
dh_fixperms -a
dh_strip -a
dh_makeshlibs -a
dh_shlibdeps -a
dh_installdeb -a
dh_gencontrol -a
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
dh_md5sums -a
dh_builddeb -a
dpkg-deb: building package 'libcoro-perl-dbgsym' in '../libcoro-perl-dbgsym_6.490-1_armhf.deb'.
dpkg-deb: building package 'libcoro-perl' in '../libcoro-perl_6.490-1_armhf.deb'.
dpkg-genchanges --build=any -mRaspbian wandboard test autobuilder <root@raspbian.org> >../libcoro-perl_6.490-1_armhf.changes
dpkg-genchanges: warning: package libcoro-perl-dbgsym listed in files list but not in control info
dpkg-genchanges: info: binary-only arch-specific upload (source code and arch-indep packages not included)
dpkg-source --after-build libcoro-perl-6.490
dpkg-buildpackage: info: binary-only upload (no source included)
--------------------------------------------------------------------------------
Build finished at 20160528-1903
Finished
--------
I: Built successfully
+------------------------------------------------------------------------------+
| Post Build Chroot |
+------------------------------------------------------------------------------+
+------------------------------------------------------------------------------+
| Changes |
+------------------------------------------------------------------------------+
libcoro-perl_6.490-1_armhf.changes:
-----------------------------------
Format: 1.8
Date: Sun, 22 May 2016 14:09:30 +0100
Source: libcoro-perl
Binary: libcoro-perl
Architecture: armhf
Version: 6.490-1
Distribution: stretch-staging
Urgency: medium
Maintainer: Raspbian wandboard test autobuilder <root@raspbian.org>
Changed-By: Dominic Hargreaves <dom@earth.li>
Description:
libcoro-perl - Perl framework implementing coroutines
Closes: 787500
Changes:
libcoro-perl (6.490-1) unstable; urgency=medium
.
* Team upload.
.
[ Lucas Kanashiro ]
* Add debian/upstream/metadata
* Import upstream version 6.470
* Add libcanary-stability-perl as build dependency
* Declare compliance with Debian policy 3.9.6
* Add autopkgtest-pkg-perl
.
[ gregor herrmann ]
* Update years of upstream copyright.
.
[ Salvatore Bonaccorso ]
* debian/control: Use HTTPS transport protocol for Vcs-Git URI
.
[ gregor herrmann ]
* New upstream release 6.490.
* Set bindnow linker flag in debian/rules.
* Fix duplicate word in debian/copyright. Thanks to lintian.
* Add more corrections to spelling.patch.
* Add libnet-http-perl to Recommends. Thanks to autopkgtest.
* Declare compliance with Debian Policy 3.9.8.
* debian/copyright: change Copyright-Format 1.0 URL to HTTPS.
.
[ Dominic Hargreaves ]
* Add patch to fix compatibility with perl 5.22+.
Closes: #787500. This patch is not supported by the upstream
author, who only supports Coro with a fork of perl called 'stableperl'
(which is not part of Debian).
Checksums-Sha1:
a0826460e373b420a3fb3e9e8245ab1f4fd1b028 161284 libcoro-perl-dbgsym_6.490-1_armhf.deb
ec2453d9b749a4a5138cff27fb665ce3190543ef 218296 libcoro-perl_6.490-1_armhf.deb
Checksums-Sha256:
042cedbe96cea3df280670f95e2cb0180dd0a64920a57bc7a32692229f2e86e0 161284 libcoro-perl-dbgsym_6.490-1_armhf.deb
a0dfeda2a7b4e70128cdda0c0371f56fc6f558fef22150c22297ef0bcd898f73 218296 libcoro-perl_6.490-1_armhf.deb
Files:
62ab437614af6b2197c397711e34989f 161284 debug extra libcoro-perl-dbgsym_6.490-1_armhf.deb
cb221cd00c276a8e8cb18ed3cc634cb2 218296 perl optional libcoro-perl_6.490-1_armhf.deb
+------------------------------------------------------------------------------+
| Package contents |
+------------------------------------------------------------------------------+
libcoro-perl-dbgsym_6.490-1_armhf.deb
-------------------------------------
new debian package, version 2.0.
size 161284 bytes: control archive=607 bytes.
505 bytes, 13 lines control
318 bytes, 3 lines md5sums
Package: libcoro-perl-dbgsym
Source: libcoro-perl
Version: 6.490-1
Architecture: armhf
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Installed-Size: 196
Depends: libcoro-perl (= 6.490-1)
Section: debug
Priority: extra
Homepage: https://metacpan.org/release/Coro
Description: Debug symbols for libcoro-perl
Auto-Built-Package: debug-symbols
Build-Ids: 7d3f7094503f72d63c9914253f45aeae8e7aca4e c4794f5c53acc80de15f78966955bff2e7bdfd81 ed82a4378663b99d97107944277195358401e713
drwxr-xr-x root/root 0 2016-05-28 19:03 ./
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/lib/
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/lib/debug/
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/lib/debug/.build-id/
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/lib/debug/.build-id/7d/
-rw-r--r-- root/root 35868 2016-05-28 19:03 ./usr/lib/debug/.build-id/7d/3f7094503f72d63c9914253f45aeae8e7aca4e.debug
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/lib/debug/.build-id/c4/
-rw-r--r-- root/root 30936 2016-05-28 19:03 ./usr/lib/debug/.build-id/c4/794f5c53acc80de15f78966955bff2e7bdfd81.debug
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/lib/debug/.build-id/ed/
-rw-r--r-- root/root 119312 2016-05-28 19:03 ./usr/lib/debug/.build-id/ed/82a4378663b99d97107944277195358401e713.debug
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/share/
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/share/doc/
lrwxrwxrwx root/root 0 2016-05-28 19:03 ./usr/share/doc/libcoro-perl-dbgsym -> libcoro-perl
libcoro-perl_6.490-1_armhf.deb
------------------------------
new debian package, version 2.0.
size 218296 bytes: control archive=3019 bytes.
1577 bytes, 30 lines control
5484 bytes, 68 lines md5sums
Package: libcoro-perl
Version: 6.490-1
Architecture: armhf
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Installed-Size: 475
Depends: perl (>= 5.22.2-1), perlapi-5.22.2, libc6 (>= 2.4), libanyevent-perl, libcommon-sense-perl, libguard-perl
Recommends: libanyevent-perl (>= 7), libev-perl, libevent-perl, libio-aio-perl (>= 3.1), libnet-http-perl
Section: perl
Priority: optional
Homepage: https://metacpan.org/release/Coro
Description: Perl framework implementing coroutines
Coro is a collection of modules which manages continuations in general, most
often in the form of cooperative threads (also called coros, or simply "coro"
in the documentation). They do not actually execute at the same time, even on
machines with multiple processors.
.
The specific flavor of thread offered by this module also guarantees you that
it will not switch between threads unless necessary. It switches at easily-
identified points in your program, so locking and parallel access are rarely
an issue, making threaded programming much safer and easier than using other
threading models.
.
Coro provides a full shared address space, which makes communication between
threads very easy. A parallel matrix multiplication benchmark runs over 300
times faster on a single core than perl's ithreads on a quad core using all
four cores.
.
This version of Coro has been patched by the Debian Project to provide
compatibility with Perl 5.22 and Perl 5.24. Please send bug reports to
Debian (<https://www.debian.org/Bugs/>) and not the original author.
drwxr-xr-x root/root 0 2016-05-28 19:03 ./
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/lib/
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/lib/arm-linux-gnueabihf/
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/lib/arm-linux-gnueabihf/perl5/
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/
-rw-r--r-- root/root 45360 2016-05-28 19:02 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro.pm
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/
-rw-r--r-- root/root 4642 2015-10-16 23:42 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/AIO.pm
-rw-r--r-- root/root 13590 2016-05-28 19:02 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/AnyEvent.pm
-rw-r--r-- root/root 1516 2015-10-16 23:42 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/BDB.pm
-rw-r--r-- root/root 4053 2015-10-16 23:42 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Channel.pm
-rw-r--r-- root/root 4677 2015-06-28 22:23 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/CoroAPI.h
-rw-r--r-- root/root 16457 2015-10-16 23:42 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Debug.pm
-rw-r--r-- root/root 2616 2016-05-28 19:02 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/EV.pm
-rw-r--r-- root/root 5431 2015-10-16 23:42 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Event.pm
-rw-r--r-- root/root 13820 2015-10-16 23:42 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Handle.pm
-rw-r--r-- root/root 26831 2016-05-28 19:02 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Intro.pod
-rw-r--r-- root/root 4016 2016-05-28 19:02 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/LWP.pm
-rw-r--r-- root/root 3750 2015-10-16 23:42 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/MakeMaker.pm
-rw-r--r-- root/root 2180 2015-10-16 23:42 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/RWLock.pm
-rw-r--r-- root/root 3827 2015-10-16 23:42 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Select.pm
-rw-r--r-- root/root 4408 2016-05-28 19:02 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Semaphore.pm
-rw-r--r-- root/root 4199 2016-05-28 19:02 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/SemaphoreSet.pm
-rw-r--r-- root/root 2294 2015-10-16 23:42 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Signal.pm
-rw-r--r-- root/root 5471 2015-10-16 23:42 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Socket.pm
-rw-r--r-- root/root 1830 2016-05-28 19:02 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Specific.pm
-rw-r--r-- root/root 19030 2016-05-28 19:02 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/State.pm
-rw-r--r-- root/root 3764 2015-10-16 23:42 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Storable.pm
-rw-r--r-- root/root 1657 2015-10-16 23:42 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Timer.pm
-rw-r--r-- root/root 5567 2015-10-16 23:42 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/Util.pm
-rwxr-xr-x root/root 2769 2016-05-28 19:02 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/jit-amd64-unix.pl
-rwxr-xr-x root/root 2977 2016-05-28 19:02 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/Coro/jit-x86-unix.pl
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/auto/
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/auto/Coro/
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/auto/Coro/EV/
-rw-r--r-- root/root 13644 2016-05-28 19:03 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/auto/Coro/EV/EV.so
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/auto/Coro/Event/
-rw-r--r-- root/root 9516 2016-05-28 19:03 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/auto/Coro/Event/Event.so
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/auto/Coro/State/
-rw-r--r-- root/root 67108 2016-05-28 19:03 ./usr/lib/arm-linux-gnueabihf/perl5/5.22/auto/Coro/State/State.so
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/share/
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/share/doc/
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/share/doc/libcoro-perl/
-rw-r--r-- root/root 227 2016-05-22 12:31 ./usr/share/doc/libcoro-perl/NEWS.Debian.gz
-rw-r--r-- root/root 277 2005-03-03 17:20 ./usr/share/doc/libcoro-perl/README
-rw-r--r-- root/root 1207 2008-03-02 16:10 ./usr/share/doc/libcoro-perl/README.linux-glibc
-rw-r--r-- root/root 2490 2016-05-22 13:15 ./usr/share/doc/libcoro-perl/changelog.Debian.gz
-rw-r--r-- root/root 23356 2015-10-16 23:42 ./usr/share/doc/libcoro-perl/changelog.gz
-rw-r--r-- root/root 6871 2016-05-22 12:31 ./usr/share/doc/libcoro-perl/copyright
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/share/doc/libcoro-perl/examples/
-rw-r--r-- root/root 240 2001-07-23 02:14 ./usr/share/doc/libcoro-perl/examples/attributes
-rw-r--r-- root/root 1714 2011-12-12 15:18 ./usr/share/doc/libcoro-perl/examples/bench
-rw-r--r-- root/root 316 2008-11-24 04:56 ./usr/share/doc/libcoro-perl/examples/dns
-rw-r--r-- root/root 1222 2008-11-24 04:56 ./usr/share/doc/libcoro-perl/examples/event
-rw-r--r-- root/root 526 2008-11-24 07:55 ./usr/share/doc/libcoro-perl/examples/lwp
-rw-r--r-- root/root 3188 2008-06-03 13:35 ./usr/share/doc/libcoro-perl/examples/myhttpd.gz
-rw-r--r-- root/root 618 2001-07-17 00:24 ./usr/share/doc/libcoro-perl/examples/prodcons1
-rw-r--r-- root/root 665 2006-11-06 19:40 ./usr/share/doc/libcoro-perl/examples/prodcons2
-rw-r--r-- root/root 620 2006-11-06 19:40 ./usr/share/doc/libcoro-perl/examples/prodcons3
-rw-r--r-- root/root 752 2007-04-14 15:06 ./usr/share/doc/libcoro-perl/examples/readline
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/share/man/
drwxr-xr-x root/root 0 2016-05-28 19:03 ./usr/share/man/man3/
-rw-r--r-- root/root 17566 2016-05-28 19:03 ./usr/share/man/man3/Coro.3pm.gz
-rw-r--r-- root/root 2934 2016-05-28 19:03 ./usr/share/man/man3/Coro::AIO.3pm.gz
-rw-r--r-- root/root 5474 2016-05-28 19:03 ./usr/share/man/man3/Coro::AnyEvent.3pm.gz
-rw-r--r-- root/root 1744 2016-05-28 19:03 ./usr/share/man/man3/Coro::BDB.3pm.gz
-rw-r--r-- root/root 2654 2016-05-28 19:03 ./usr/share/man/man3/Coro::Channel.3pm.gz
-rw-r--r-- root/root 3914 2016-05-28 19:03 ./usr/share/man/man3/Coro::Debug.3pm.gz
-rw-r--r-- root/root 2219 2016-05-28 19:03 ./usr/share/man/man3/Coro::EV.3pm.gz
-rw-r--r-- root/root 2875 2016-05-28 19:03 ./usr/share/man/man3/Coro::Event.3pm.gz
-rw-r--r-- root/root 3293 2016-05-28 19:03 ./usr/share/man/man3/Coro::Handle.3pm.gz
-rw-r--r-- root/root 11689 2016-05-28 19:03 ./usr/share/man/man3/Coro::Intro.3pm.gz
-rw-r--r-- root/root 2730 2016-05-28 19:03 ./usr/share/man/man3/Coro::LWP.3pm.gz
-rw-r--r-- root/root 2506 2016-05-28 19:03 ./usr/share/man/man3/Coro::MakeMaker.3pm.gz
-rw-r--r-- root/root 1714 2016-05-28 19:03 ./usr/share/man/man3/Coro::RWLock.3pm.gz
-rw-r--r-- root/root 2201 2016-05-28 19:03 ./usr/share/man/man3/Coro::Select.3pm.gz
-rw-r--r-- root/root 2677 2016-05-28 19:03 ./usr/share/man/man3/Coro::Semaphore.3pm.gz
-rw-r--r-- root/root 2223 2016-05-28 19:03 ./usr/share/man/man3/Coro::SemaphoreSet.3pm.gz
-rw-r--r-- root/root 1998 2016-05-28 19:03 ./usr/share/man/man3/Coro::Signal.3pm.gz
-rw-r--r-- root/root 2202 2016-05-28 19:03 ./usr/share/man/man3/Coro::Socket.3pm.gz
-rw-r--r-- root/root 1814 2016-05-28 19:03 ./usr/share/man/man3/Coro::Specific.3pm.gz
-rw-r--r-- root/root 8747 2016-05-28 19:03 ./usr/share/man/man3/Coro::State.3pm.gz
-rw-r--r-- root/root 2157 2016-05-28 19:03 ./usr/share/man/man3/Coro::Storable.3pm.gz
-rw-r--r-- root/root 1685 2016-05-28 19:03 ./usr/share/man/man3/Coro::Timer.3pm.gz
-rw-r--r-- root/root 2592 2016-05-28 19:03 ./usr/share/man/man3/Coro::Util.3pm.gz
+------------------------------------------------------------------------------+
| Post Build |
+------------------------------------------------------------------------------+
+------------------------------------------------------------------------------+
| Cleanup |
+------------------------------------------------------------------------------+
Purging /<<BUILDDIR>>
Not cleaning session: cloned chroot in use
+------------------------------------------------------------------------------+
| Summary |
+------------------------------------------------------------------------------+
Build Architecture: armhf
Build-Space: 4360
Build-Time: 81
Distribution: stretch-staging
Host Architecture: armhf
Install-Time: 193
Job: libcoro-perl_6.490-1
Machine Architecture: armhf
Package: libcoro-perl
Package-Time: 319
Source-Version: 6.490-1
Space: 4360
Status: successful
Version: 6.490-1
--------------------------------------------------------------------------------
Finished at 20160528-1903
Build needed 00:05:19, 4360k disc space