libcoro-perl →
6.390-1 →
armhf → 2014-06-08 05:36:23
sbuild (Debian sbuild) 0.63.2 (18 Aug 2012) on bm-wb-04
╔══════════════════════════════════════════════════════════════════════════════╗
║ libcoro-perl 6.390-1 (armhf) 08 Jun 2014 05:31 ║
╚══════════════════════════════════════════════════════════════════════════════╝
Package: libcoro-perl
Version: 6.390-1
Source Version: 6.390-1
Distribution: jessie-staging
Machine Architecture: armhf
Host Architecture: armhf
Build Architecture: armhf
I: NOTICE: Log filtering will replace 'build/libcoro-perl-Cmh3QF/libcoro-perl-6.390' with '«PKGBUILDDIR»'
I: NOTICE: Log filtering will replace 'build/libcoro-perl-Cmh3QF' with '«BUILDDIR»'
I: NOTICE: Log filtering will replace 'var/lib/schroot/mount/jessie-staging-armhf-sbuild-3efe8f7b-7c4b-43c3-a122-648f42323670' with '«CHROOT»'
┌──────────────────────────────────────────────────────────────────────────────┐
│ Update chroot │
└──────────────────────────────────────────────────────────────────────────────┘
Get:1 http://172.17.0.1 jessie-staging InRelease [11.3 kB]
Get:2 http://172.17.0.1 jessie-staging/main Sources [7308 kB]
Get:3 http://172.17.0.1 jessie-staging/main armhf Packages [8187 kB]
Ign http://172.17.0.1 jessie-staging/main Translation-en
Fetched 15.5 MB in 28s (535 kB/s)
Reading package lists...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Fetch source files │
└──────────────────────────────────────────────────────────────────────────────┘
Check APT
─────────
Checking available source versions...
Download source files with APT
──────────────────────────────
Reading package lists...
Building dependency tree...
Reading state information...
NOTICE: 'libcoro-perl' packaging is maintained in the 'Git' version control system at:
git://anonscm.debian.org/pkg-perl/packages/libcoro-perl.git
Need to get 198 kB of source archives.
Get:1 http://172.17.0.1/private/ jessie-staging/main libcoro-perl 6.390-1 (dsc) [2322 B]
Get:2 http://172.17.0.1/private/ jessie-staging/main libcoro-perl 6.390-1 (tar) [189 kB]
Get:3 http://172.17.0.1/private/ jessie-staging/main libcoro-perl 6.390-1 (diff) [7136 B]
Fetched 198 kB in 0s (663 kB/s)
Download complete and in download only mode
Check arch
──────────
Merged Build-Depends: build-essential, fakeroot
Filtered Build-Depends: build-essential, fakeroot
dpkg-deb: building package `sbuild-build-depends-core-dummy' in `/«BUILDDIR»/resolver-2JsUq0/apt_archive/sbuild-build-depends-core-dummy.deb'.
OK
Reading package lists...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Install core build dependencies (apt-based resolver) │
└──────────────────────────────────────────────────────────────────────────────┘
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
sbuild-build-depends-core-dummy
debconf: delaying package configuration, since apt-utils is not installed
0 upgraded, 1 newly installed, 0 to remove and 50 not upgraded.
Need to get 0 B/818 B of archives.
After this operation, 0 B of additional disk space will be used.
Selecting previously unselected package sbuild-build-depends-core-dummy.
(Reading database ... 11664 files and directories currently installed.)
Preparing to unpack .../sbuild-build-depends-core-dummy.deb ...
Unpacking sbuild-build-depends-core-dummy (0.invalid.0) ...
Setting up sbuild-build-depends-core-dummy (0.invalid.0) ...
Merged Build-Depends: base-files, base-passwd, bash, bsdutils, coreutils, dash, debianutils, diffutils, dpkg, e2fsprogs, findutils, grep, gzip, hostname, libc-bin, login, mount, ncurses-base, ncurses-bin, perl-base, sed, sysvinit, sysvinit-utils, tar, util-linux, libc6-dev | libc-dev, gcc (>= 4:4.4.3), g++ (>= 4:4.4.3), make, dpkg-dev (>= 1.13.5), debhelper (>= 9.20120312), libanyevent-perl, libcommon-sense-perl, libev-perl, libevent-perl, libguard-perl, perl
Filtered Build-Depends: base-files, base-passwd, bash, bsdutils, coreutils, dash, debianutils, diffutils, dpkg, e2fsprogs, findutils, grep, gzip, hostname, libc-bin, login, mount, ncurses-base, ncurses-bin, perl-base, sed, sysvinit, sysvinit-utils, tar, util-linux, libc6-dev, gcc (>= 4:4.4.3), g++ (>= 4:4.4.3), make, dpkg-dev (>= 1.13.5), debhelper (>= 9.20120312), libanyevent-perl, libcommon-sense-perl, libev-perl, libevent-perl, libguard-perl, perl
dpkg-deb: building package `sbuild-build-depends-libcoro-perl-dummy' in `/«BUILDDIR»/resolver-nHhmda/apt_archive/sbuild-build-depends-libcoro-perl-dummy.deb'.
OK
Reading package lists...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Install libcoro-perl build dependencies (apt-based resolver) │
└──────────────────────────────────────────────────────────────────────────────┘
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
bsdmainutils debhelper file gettext gettext-base groff-base intltool-debian
libanyevent-perl libasprintf0c2 libcommon-sense-perl libcroco3 libev-perl
libevent-perl libffi6 libglib2.0-0 libguard-perl libmagic1 libpipeline1
libunistring0 libxml2 man-db po-debconf
Suggested packages:
wamerican wordlist whois vacation dh-make gettext-doc groff libio-async-perl
libjson-perl libjson-xs-perl libnet-ssleay-perl libpoe-perl
libtask-weaken-perl less www-browser libmail-box-perl
Recommended packages:
curl wget lynx-cur autopoint libasprintf-dev libgettextpo-dev
libasync-interrupt-perl libglib2.0-data shared-mime-info xml-core
libmail-sendmail-perl
The following NEW packages will be installed:
bsdmainutils debhelper file gettext gettext-base groff-base intltool-debian
libanyevent-perl libasprintf0c2 libcommon-sense-perl libcroco3 libev-perl
libevent-perl libffi6 libglib2.0-0 libguard-perl libmagic1 libpipeline1
libunistring0 libxml2 man-db po-debconf
sbuild-build-depends-libcoro-perl-dummy
0 upgraded, 23 newly installed, 0 to remove and 50 not upgraded.
Need to get 9305 kB/9306 kB of archives.
After this operation, 24.7 MB of additional disk space will be used.
Get:1 http://172.17.0.1/private/ jessie-staging/main libpipeline1 armhf 1.3.0-1 [21.1 kB]
Get:2 http://172.17.0.1/private/ jessie-staging/main groff-base armhf 1.22.2-5 [962 kB]
Get:3 http://172.17.0.1/private/ jessie-staging/main bsdmainutils armhf 9.0.5 [206 kB]
Get:4 http://172.17.0.1/private/ jessie-staging/main man-db armhf 2.6.7.1-1 [964 kB]
Get:5 http://172.17.0.1/private/ jessie-staging/main libasprintf0c2 armhf 0.18.3.2-1 [29.0 kB]
Get:6 http://172.17.0.1/private/ jessie-staging/main libmagic1 armhf 1:5.18-1 [229 kB]
Get:7 http://172.17.0.1/private/ jessie-staging/main libxml2 armhf 2.9.1+dfsg1-3 [836 kB]
Get:8 http://172.17.0.1/private/ jessie-staging/main libffi6 armhf 3.1~rc1+r3.0.13-12 [17.6 kB]
Get:9 http://172.17.0.1/private/ jessie-staging/main libglib2.0-0 armhf 2.40.0-3 [2247 kB]
Get:10 http://172.17.0.1/private/ jessie-staging/main libcroco3 armhf 0.6.8-2 [119 kB]
Get:11 http://172.17.0.1/private/ jessie-staging/main libunistring0 armhf 0.9.3-5 [408 kB]
Get:12 http://172.17.0.1/private/ jessie-staging/main file armhf 1:5.18-1 [57.2 kB]
Get:13 http://172.17.0.1/private/ jessie-staging/main gettext-base armhf 0.18.3.2-1 [112 kB]
Get:14 http://172.17.0.1/private/ jessie-staging/main gettext armhf 0.18.3.2-1 [1137 kB]
Get:15 http://172.17.0.1/private/ jessie-staging/main intltool-debian all 0.35.0+20060710.1 [29.8 kB]
Get:16 http://172.17.0.1/private/ jessie-staging/main po-debconf all 1.0.16+nmu2 [223 kB]
Get:17 http://172.17.0.1/private/ jessie-staging/main debhelper all 9.20140228 [691 kB]
Get:18 http://172.17.0.1/private/ jessie-staging/main libanyevent-perl armhf 7.070-1 [450 kB]
Get:19 http://172.17.0.1/private/ jessie-staging/main libcommon-sense-perl armhf 3.72-5 [23.0 kB]
Get:20 http://172.17.0.1/private/ jessie-staging/main libev-perl armhf 4.15-1 [267 kB]
Get:21 http://172.17.0.1/private/ jessie-staging/main libevent-perl armhf 1.21-2 [260 kB]
Get:22 http://172.17.0.1/private/ jessie-staging/main libguard-perl armhf 1.022-2 [15.6 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 9305 kB in 2s (3922 kB/s)
Selecting previously unselected package libpipeline1:armhf.
(Reading database ... 11664 files and directories currently installed.)
Preparing to unpack .../libpipeline1_1.3.0-1_armhf.deb ...
Unpacking libpipeline1:armhf (1.3.0-1) ...
Selecting previously unselected package groff-base.
Preparing to unpack .../groff-base_1.22.2-5_armhf.deb ...
Unpacking groff-base (1.22.2-5) ...
Selecting previously unselected package bsdmainutils.
Preparing to unpack .../bsdmainutils_9.0.5_armhf.deb ...
Unpacking bsdmainutils (9.0.5) ...
Selecting previously unselected package man-db.
Preparing to unpack .../man-db_2.6.7.1-1_armhf.deb ...
Unpacking man-db (2.6.7.1-1) ...
Selecting previously unselected package libasprintf0c2:armhf.
Preparing to unpack .../libasprintf0c2_0.18.3.2-1_armhf.deb ...
Unpacking libasprintf0c2:armhf (0.18.3.2-1) ...
Selecting previously unselected package libmagic1:armhf.
Preparing to unpack .../libmagic1_1%3a5.18-1_armhf.deb ...
Unpacking libmagic1:armhf (1:5.18-1) ...
Selecting previously unselected package libxml2:armhf.
Preparing to unpack .../libxml2_2.9.1+dfsg1-3_armhf.deb ...
Unpacking libxml2:armhf (2.9.1+dfsg1-3) ...
Selecting previously unselected package libffi6:armhf.
Preparing to unpack .../libffi6_3.1~rc1+r3.0.13-12_armhf.deb ...
Unpacking libffi6:armhf (3.1~rc1+r3.0.13-12) ...
Selecting previously unselected package libglib2.0-0:armhf.
Preparing to unpack .../libglib2.0-0_2.40.0-3_armhf.deb ...
Unpacking libglib2.0-0:armhf (2.40.0-3) ...
Selecting previously unselected package libcroco3:armhf.
Preparing to unpack .../libcroco3_0.6.8-2_armhf.deb ...
Unpacking libcroco3:armhf (0.6.8-2) ...
Selecting previously unselected package libunistring0:armhf.
Preparing to unpack .../libunistring0_0.9.3-5_armhf.deb ...
Unpacking libunistring0:armhf (0.9.3-5) ...
Selecting previously unselected package file.
Preparing to unpack .../file_1%3a5.18-1_armhf.deb ...
Unpacking file (1:5.18-1) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../gettext-base_0.18.3.2-1_armhf.deb ...
Unpacking gettext-base (0.18.3.2-1) ...
Selecting previously unselected package gettext.
Preparing to unpack .../gettext_0.18.3.2-1_armhf.deb ...
Unpacking gettext (0.18.3.2-1) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../intltool-debian_0.35.0+20060710.1_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.1) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../po-debconf_1.0.16+nmu2_all.deb ...
Unpacking po-debconf (1.0.16+nmu2) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../debhelper_9.20140228_all.deb ...
Unpacking debhelper (9.20140228) ...
Selecting previously unselected package libanyevent-perl.
Preparing to unpack .../libanyevent-perl_7.070-1_armhf.deb ...
Unpacking libanyevent-perl (7.070-1) ...
Selecting previously unselected package libcommon-sense-perl.
Preparing to unpack .../libcommon-sense-perl_3.72-5_armhf.deb ...
Unpacking libcommon-sense-perl (3.72-5) ...
Selecting previously unselected package libev-perl.
Preparing to unpack .../libev-perl_4.15-1_armhf.deb ...
Unpacking libev-perl (4.15-1) ...
Selecting previously unselected package libevent-perl.
Preparing to unpack .../libevent-perl_1.21-2_armhf.deb ...
Unpacking libevent-perl (1.21-2) ...
Selecting previously unselected package libguard-perl.
Preparing to unpack .../libguard-perl_1.022-2_armhf.deb ...
Unpacking libguard-perl (1.022-2) ...
Selecting previously unselected package sbuild-build-depends-libcoro-perl-dummy.
Preparing to unpack .../sbuild-build-depends-libcoro-perl-dummy.deb ...
Unpacking sbuild-build-depends-libcoro-perl-dummy (0.invalid.0) ...
Setting up libpipeline1:armhf (1.3.0-1) ...
Setting up groff-base (1.22.2-5) ...
Setting up bsdmainutils (9.0.5) ...
update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode
update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode
Setting up man-db (2.6.7.1-1) ...
Not building database; man-db/auto-update is not 'true'.
Setting up libasprintf0c2:armhf (0.18.3.2-1) ...
Setting up libmagic1:armhf (1:5.18-1) ...
Setting up libxml2:armhf (2.9.1+dfsg1-3) ...
Setting up libffi6:armhf (3.1~rc1+r3.0.13-12) ...
Setting up libglib2.0-0:armhf (2.40.0-3) ...
No schema files found: doing nothing.
Setting up libcroco3:armhf (0.6.8-2) ...
Setting up libunistring0:armhf (0.9.3-5) ...
Setting up file (1:5.18-1) ...
Setting up gettext-base (0.18.3.2-1) ...
Setting up gettext (0.18.3.2-1) ...
Setting up intltool-debian (0.35.0+20060710.1) ...
Setting up po-debconf (1.0.16+nmu2) ...
Setting up debhelper (9.20140228) ...
Setting up libanyevent-perl (7.070-1) ...
Setting up libcommon-sense-perl (3.72-5) ...
Setting up libev-perl (4.15-1) ...
Setting up libevent-perl (1.21-2) ...
Setting up libguard-perl (1.022-2) ...
Setting up sbuild-build-depends-libcoro-perl-dummy (0.invalid.0) ...
Processing triggers for libc-bin (2.18-5) ...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Build environment │
└──────────────────────────────────────────────────────────────────────────────┘
Kernel: Linux 3.14-1-armmp armhf (armv7l)
Toolchain package versions: binutils_2.24.51.20140425-1 dpkg-dev_1.17.6+rpi1 g++-4.8_4.8.2-21 gcc-4.8_4.8.2-21 libc6-dev_2.18-5 libstdc++-4.8-dev_4.8.2-21 libstdc++6_4.9.0-1 linux-libc-dev_3.13.10-1+rpi1
Package versions: apt_1.0.1 base-files_7.2+rpi1 base-passwd_3.5.28 bash_4.3-7 binutils_2.24.51.20140425-1 bsdmainutils_9.0.5 bsdutils_1:2.20.1-5.7 build-essential_11.6 bzip2_1.0.6-5 coreutils_8.21-1.2 cpio_2.11+dfsg-2 cpp_4:4.8.2-3 cpp-4.8_4.8.2-21 dash_0.5.7-4 debconf_1.5.53 debconf-i18n_1.5.53 debfoster_2.7-1.2 debhelper_9.20140228 debianutils_4.4 diffutils_1:3.3-1 dpkg_1.17.6+rpi1 dpkg-dev_1.17.6+rpi1 e2fslibs_1.42.9-3 e2fsprogs_1.42.9-3 fakeroot_1.18.4-2 file_1:5.18-1 findutils_4.4.2-8 g++_4:4.8.2-3 g++-4.8_4.8.2-21 gcc_4:4.8.2-3 gcc-4.5-base_4.5.3-12+rpi1 gcc-4.6-base_4.6.4-5+rpi1 gcc-4.7-base_4.7.3-11+rpi1 gcc-4.8_4.8.2-21 gcc-4.8-base_4.8.2-21 gcc-4.9-base_4.9.0-1 gettext_0.18.3.2-1 gettext-base_0.18.3.2-1 gnupg_1.4.16-1.1 gpgv_1.4.16-1.1 grep_2.18-2 groff-base_1.22.2-5 gzip_1.6-3 hostname_3.15 init-system-helpers_1.18 initramfs-tools_0.115 initscripts_2.88dsf-53 insserv_1.14.0-5 intltool-debian_0.35.0+20060710.1 klibc-utils_2.0.2-1+rpi1 kmod_16-2 libacl1_2.2.52-1 libanyevent-perl_7.070-1 libapt-pkg4.12_1.0.1 libasan0_4.8.2-21 libasprintf0c2_0.18.3.2-1 libatomic1_4.9.0-1 libattr1_1:2.4.47-1 libaudit-common_1:2.3.6-1 libaudit1_1:2.3.6-1 libblkid1_2.20.1-5.7 libbz2-1.0_1.0.6-5 libc-bin_2.18-5 libc-dev-bin_2.18-5 libc6_2.18-5 libc6-dev_2.18-5 libcap2_1:2.22-1.2 libcloog-isl4_0.18.2-1 libcomerr2_1.42.9-3 libcommon-sense-perl_3.72-5 libcroco3_0.6.8-2 libdb5.1_5.1.29-6 libdb5.3_5.3.28-3 libdbus-1-3_1.8.0-3 libdpkg-perl_1.17.6+rpi1 libev-perl_4.15-1 libevent-perl_1.21-2 libffi6_3.1~rc1+r3.0.13-12 libgc1c2_1:7.2d-6 libgcc-4.8-dev_4.8.2-21 libgcc1_1:4.9.0-1 libgdbm3_1.8.3-12 libglib2.0-0_2.40.0-3 libgmp10_2:6.0.0+dfsg-2 libgomp1_4.9.0-1 libguard-perl_1.022-2 libisl10_0.12.2-1 libklibc_2.0.2-1+rpi1 libkmod2_16-2 liblocale-gettext-perl_1.05-8 liblzma5_5.1.1alpha+20120614-2 libmagic1_1:5.18-1 libmount1_2.20.1-5.7 libmpc3_1.0.1-1 libmpfr4_3.1.2-1 libncurses5_5.9+20140118-1 libncursesw5_5.9+20140118-1 libpam-modules_1.1.8-3 libpam-modules-bin_1.1.8-3 libpam-runtime_1.1.8-3 libpam0g_1.1.8-3 libpcre3_1:8.31-5 libpipeline1_1.3.0-1 libprocps0_1:3.3.4-2 libprocps3_1:3.3.9-2 libreadline6_6.3-6 libselinux1_2.2.2-1 libsemanage-common_2.2-1 libsemanage1_2.2-1 libsepol1_2.2-1 libslang2_2.2.4-16 libss2_1.42.9-3 libstdc++-4.8-dev_4.8.2-21 libstdc++6_4.9.0-1 libtext-charwidth-perl_0.04-7+b3 libtext-iconv-perl_1.7-5+b3 libtext-wrapi18n-perl_0.06-7 libtimedate-perl_2.3000-2 libtinfo5_5.9+20140118-1 libudev1_204-8 libunistring0_0.9.3-5 libusb-0.1-4_2:0.1.12-23.3 libustr-1.0-1_1.0.4-3 libuuid1_2.20.1-5.7 libxml2_2.9.1+dfsg1-3 linux-libc-dev_3.13.10-1+rpi1 login_1:4.1.5.1-1.1 lsb-base_4.1+Debian12+rpi1 make_3.81-8.3 makedev_2.3.1-93 man-db_2.6.7.1-1 mawk_1.3.3-17 mount_2.20.1-5.7 multiarch-support_2.18-5 nano_2.2.6-1.1 ncurses-base_5.9+20140118-1 ncurses-bin_5.9+20140118-1 passwd_1:4.1.5.1-1.1 patch_2.7.1-5 perl_5.18.2-2+b1 perl-base_5.18.2-2+b1 perl-modules_5.18.2-2 plymouth_0.8.8-16 po-debconf_1.0.16+nmu2 procps_1:3.3.9-2 raspbian-archive-keyring_20120528.2 readline-common_6.3-6 sbuild-build-depends-core-dummy_0.invalid.0 sbuild-build-depends-libcoro-perl-dummy_0.invalid.0 sed_4.2.2-4 sensible-utils_0.0.9 startpar_0.59-3 sysv-rc_2.88dsf-53 sysvinit_2.88dsf-53 sysvinit-core_2.88dsf-53 sysvinit-utils_2.88dsf-53 tar_1.27.1-2 tzdata_2014b-1 udev_204-8 util-linux_2.20.1-5.7 xz-utils_5.1.1alpha+20120614-2 zlib1g_1:1.2.8.dfsg-1
┌──────────────────────────────────────────────────────────────────────────────┐
│ Build │
└──────────────────────────────────────────────────────────────────────────────┘
Unpack source
─────────────
gpgv: keyblock resource `/sbuild-nonexistent/.gnupg/trustedkeys.gpg': file open error
gpgv: Signature made Mon Jun 2 17:37:24 2014 UTC using RSA key ID 8649AA06
gpgv: Can't check signature: public key not found
dpkg-source: warning: failed to verify signature on ./libcoro-perl_6.390-1.dsc
dpkg-source: info: extracting libcoro-perl in libcoro-perl-6.390
dpkg-source: info: unpacking libcoro-perl_6.390.orig.tar.gz
dpkg-source: info: unpacking libcoro-perl_6.390-1.debian.tar.xz
dpkg-source: info: applying fix-wrong-path-for-interpreter.patch
dpkg-source: info: applying whatis.patch
dpkg-source: info: applying spelling.patch
dpkg-source: info: applying fix-ftbfs-with-longjmp.patch
Check disc space
────────────────
Sufficient free space for build
User Environment
────────────────
APT_CONFIG=/var/lib/sbuild/apt.conf
COLUMNS=80
CONSOLE=/dev/console
DEB_BUILD_OPTIONS=parallel=4
HOME=/sbuild-nonexistent
INIT_VERSION=sysvinit-2.88
LC_ALL=POSIX
LINES=24
LOGNAME=buildd
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
PREVLEVEL=N
PWD=/
RUNLEVEL=2
SCHROOT_ALIAS_NAME=jessie-staging-armhf-sbuild
SCHROOT_CHROOT_NAME=jessie-staging-armhf-sbuild
SCHROOT_COMMAND=env
SCHROOT_GID=109
SCHROOT_GROUP=buildd
SCHROOT_SESSION_ID=jessie-staging-armhf-sbuild-3efe8f7b-7c4b-43c3-a122-648f42323670
SCHROOT_UID=104
SCHROOT_USER=buildd
SHELL=/bin/sh
TERM=linux
USER=buildd
init=/sbin/init
previous=N
rootmnt=/root
runlevel=2
dpkg-buildpackage
─────────────────
dpkg-buildpackage: source package libcoro-perl
dpkg-buildpackage: source version 6.390-1
dpkg-buildpackage: source distribution unstable
dpkg-source --before-build libcoro-perl-6.390
dpkg-buildpackage: host architecture armhf
fakeroot debian/rules clean
dh clean
dh_testdir
dh_auto_clean
dh_clean
debian/rules build-arch
dh build-arch
dh_testdir -a
dh_auto_configure -a
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Event version 1.21 found, building Event support.
EV version 4.15 found, building EV support.
Checking if your kit is complete...
Looks good
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro has a number of configuration options. Due to its maturity, the
defaults that Coro chooses are usually fine, so you can decide to skip
these questions. Only if something went wrong you should select 'n'
here and manually configure Coro, and, of course, report this to the
maintainer :)
Skip further questions and use defaults (y/n)? [y] y
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can use a number of methods to implement coroutines at the C
level. The default chosen is based on your current confguration and is
correct in most cases, but you still can chose between these alternatives:
u The unix 'ucontext.h' functions are relatively new and not implemented
or well-tested in older unices. They allow very fast coroutine creation
and reasonably fast switching. They are, however, usually slower than
the other alternatives due to an extra syscall done by swapcontext. And
while nominally most portable (it's the only POSIX-standardised
interface for coroutines), ucontext functions are, as usual, broken on
most/all BSDs.
s If the ucontext functions are not working or you don't want
to use them for other reasons you can try a workaround using
setjmp/longjmp/sigaltstack (also standard unix functions). Coroutine
creation is rather slow, but switching is very fast (often much faster
than with the ucontext functions). Unfortunately, glibc-2.1 and
below don't even feature a working sigaltstack. You cannot use this
implementation if some other code uses SIGUSR2 or you plan to create
coroutines from an alternative signal stack, as both are being used for
coroutine creation.
a Handcoded assembly. This is the fastest and most compatible method,
with the least side effects, if it works, that is. It has been tested
on GNU/Linux x86 and x86_64 systems and should work on all x86/x86_64
systems using the SVR ELF ABI (it is also reported to be working on
Strawberry Perl for Windows using MinGW). This is the recommended
method on supported platforms. When it doesn't work, use another
method, such as (s)etjmp/longjmp.
l GNU/Linux. Very old GNU/Linux systems (glibc-2.1 and below) need
this hack. Since it is very linux-specific it is also quite fast and
recommended even for newer versions; when it works, that is (currently
x86 and a few others only. If it compiles, it's usually ok). Newer
glibc versions (>= 2.5) stop working with this implementation however.
i IRIX. For some reason, SGI really does not like to follow POSIX (does
that surprise you?), so this workaround might be needed (it's fast),
although [s] and [u] should also work now.
w Microsoft Windows. Try this on Microsoft Windows when using Cygwin or
the MSVC compilers (e.g. ActiveState Perl, but see "a" for Strawberry
Perl), although, as there is no standard on how to do this under
windows, different environments might work differently. Doh.
f Microsoft Windows. Try this on Microsoft Windows if w fails. It is slower
and uses a lot more memory, but should be working all the time.
p Use pthread API. Try to avoid this option, it was only created to
make a point about the programming language shootout. It is unlikely
to work with perls that have windows process emulation enabled ("perl
threads"). It is also likely the slowest method of implementing
coroutines. It might work fine as a last resort, however, as the
pthread API is slightly better tested than ucontext functions for
example. Of course, not on BSDs, who usually have very broken pthread
implementations.
Coro tries hard to come up with a suitable default for most systems,
so pressing return at the prompt usually does the right thing. If you
experience problems (e.g. make test fails) then you should experiment with
this setting.
Use which implementation,
<s>etjmp, <u>ctx, <a>sm, <i>rix, <l>inux, <p>threads, <w>indows, <f>iber? [s] s
Using setjmp/longjmp/sigaltstack implementation
Trying to detect stack growth direction (for TEST_sigaltstack)
You might see some warnings, this should not concern you.
*****************************************************************************
If the testsuite fails PLEASE provide the following information
to Marc Lehmann <schmorp@schmorp.de>: operating system name, version,
architecture name and this string '(skaddr)|(sksize)'. Thanks a lot!
*****************************************************************************
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Per-context stack size factor: Depending on your settings, Coro tries to
share the C stacks is creates as much as possible, but sometimes it needs
to allocate a new one. This setting controls the maximum size that gets
allocated, and should not be set too high, as memory and address space
still is wasted even if it's not fully used. The value entered will be
multiplied by sizeof(void *), which is usually 4 on 32-bit systems, and 8
on 64-bit systems.
A setting of 16384 (the default) therefore corresponds to a 64k..128k
stack, which usually is ample space (you might even want to try 8192 or
lower if your program creates many coroutines).
On systems supporting mmap and dynamic memory management, the actual
memory usually gets allocated on demand, but with many large stacks you
can still run out of address space on your typical 32 bit platform (not to
forget the pagetables).
Some perls (mostly threaded ones and perl compiled under linux 2.6) and
some programs (inefficient regexes can use a lot of stack space) may
need much, much more: If Coro segfaults with weird backtraces (e.g. in a
function prologue) or in t/10_bugs.t, you might want to increase this to
65536 or more.
The default should be fine, and can be changed at runtime with
Coro::State::cctx_stacksize.
C stack size factor? [16384] 16384
using a stacksize of 16384 * sizeof(void*)
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can optionally put a guard area before each stack segment: When the
stack is too small and the access is not too far outside the stack (i.e.
within the guard area), then the program will safely segfault instead of
running into other data. The cost is some additional overhead with is
usually negligible, and extra use of address space.
The guard area size currently needs to be specified in pages (typical
pagesizes are 4k and 8k). The guard area is only enabled on a few
hardcoded architectures and is ignored on others. The actual preprocessor
expression disables this feature if:
!__i386 && !__x86_64 && !__powerpc && !__m68k
&& !__alpha && !__mips && !__sparc64
The default, as usual, should be just fine.
Number of guard pages (0 disables)? [4] 4
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can tell valgrind about its stacks and so reduce spurious warnings
where valgrind would otherwise complain about possible stack switches.
Enabling this does not incur noticable runtime or memory overhead, but it
requires that you have the <valgrind/valgrind.h> header file available.
Valgrind support is completely optional, so disabling it is the safe
choice.
Enable valgrind support (y/n)? [n] n
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can use (or even trick) some perl functions into doing what it needs
instead of relying on (some) of its own functions. This might increase
chances that it compiles and works, but it could just as well result in
memory leaks, crashes or silent data corruption. It certainly does result
in slightly slower speed and higher memory consumption, though, so YOU
SHOULD ENABLE THIS OPTION ONLY AS A LAST RESORT.
Prefer perl functions over coro functions (y/n)? [n] n
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can use a simple JIT compiler to compile a part of the thread switch
function at runtime. On perls with windows process emulation (most!),
this results in a 50% speed improvement. On sane perls, the gain is much
less, usually around 5%. If you enable this option, then the JIT will
be enabled, on compatible operating systems and CPUs (currently only
x86/amd64 on certain unix clones). Otherwise, it will be disabled. It
should be safe to leave on - this setting is only here so you can switch
it off in case of problems.
Note that some broken kernels (often calling themselves "hardened") break
all JIT generation by manipulating some system calls. If you get bus
errors or segmentation faults immediately when the JIT is enabled but not
without, then note that disabling the JIT only fixes some symptoms, not
the underlying problem, and you might run into other problems later.
Try to use the JIT compiler, if available? [y] y
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro has experimental support for cloning states. This can be used
to implement a scheme-like call/cc. However, this doesn't add to the
expressiveness in general, and is likely perl-version specific (and perl
5.12 deliberately removed support for it). As such, it is disabled by
default. Enable it when you want to play around with it, but note that it
isn't supported, and unlikely ever will be. It exists mainly to prove that
it could be done - if only it were useful for something.
Implement Coro::State->clone method (y/n)? [n] n
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Writing Makefile for Coro::State
Writing MYMETA.yml and MYMETA.json
Writing Makefile for Coro::Event
Writing MYMETA.yml and MYMETA.json
Writing Makefile for Coro::EV
Writing MYMETA.yml and MYMETA.json
Writing Makefile for Coro
Writing MYMETA.yml and MYMETA.json
dh_auto_build -a
make[1]: Entering directory `/«PKGBUILDDIR»'
cp Coro/MakeMaker.pm blib/lib/Coro/MakeMaker.pm
cp Coro/Semaphore.pm blib/lib/Coro/Semaphore.pm
cp Coro/Signal.pm blib/lib/Coro/Signal.pm
cp Coro/State.pm blib/lib/Coro/State.pm
cp Coro.pm blib/lib/Coro.pm
cp Coro/Debug.pm blib/lib/Coro/Debug.pm
cp Coro/CoroAPI.h blib/lib/Coro/CoroAPI.h
cp Coro/SemaphoreSet.pm blib/lib/Coro/SemaphoreSet.pm
cp Coro/Channel.pm blib/lib/Coro/Channel.pm
cp Coro/AnyEvent.pm blib/lib/Coro/AnyEvent.pm
cp Coro/jit-amd64-unix.pl blib/lib/Coro/jit-amd64-unix.pl
cp Coro/AIO.pm blib/lib/Coro/AIO.pm
cp Coro/Select.pm blib/lib/Coro/Select.pm
cp Coro/BDB.pm blib/lib/Coro/BDB.pm
cp Coro/Socket.pm blib/lib/Coro/Socket.pm
cp Coro/Handle.pm blib/lib/Coro/Handle.pm
cp Coro/jit-x86-unix.pl blib/lib/Coro/jit-x86-unix.pl
cp Coro/Specific.pm blib/lib/Coro/Specific.pm
cp Coro/LWP.pm blib/lib/Coro/LWP.pm
cp Coro/Timer.pm blib/lib/Coro/Timer.pm
cp Coro/Storable.pm blib/lib/Coro/Storable.pm
cp Coro/Util.pm blib/lib/Coro/Util.pm
cp Coro/RWLock.pm blib/lib/Coro/RWLock.pm
make[2]: Entering directory `/«PKGBUILDDIR»/Coro'
Skip ../blib/lib/Coro/Handle.pm (unchanged)
Skip ../blib/lib/Coro/Select.pm (unchanged)
Skip ../blib/lib/Coro/SemaphoreSet.pm (unchanged)
Skip ../blib/lib/Coro/Semaphore.pm (unchanged)
Skip ../blib/lib/Coro/AIO.pm (unchanged)
Skip ../blib/lib/Coro/jit-amd64-unix.pl (unchanged)
Skip ../blib/lib/Coro/Signal.pm (unchanged)
Skip ../blib/lib/Coro/MakeMaker.pm (unchanged)
Skip ../blib/lib/Coro/Storable.pm (unchanged)
Skip ../blib/lib/Coro/Util.pm (unchanged)
Skip ../blib/lib/Coro/Debug.pm (unchanged)
Skip ../blib/lib/Coro/AnyEvent.pm (unchanged)
Skip ../blib/lib/Coro/RWLock.pm (unchanged)
Skip ../blib/lib/Coro/State.pm (unchanged)
Skip ../blib/lib/Coro/LWP.pm (unchanged)
Skip ../blib/lib/Coro/Socket.pm (unchanged)
Skip ../blib/lib/Coro/BDB.pm (unchanged)
Skip ../blib/lib/Coro/Specific.pm (unchanged)
Skip ../blib/lib/Coro/Timer.pm (unchanged)
Skip ../blib/lib/Coro/Channel.pm (unchanged)
cp Intro.pod ../blib/lib/Coro/Intro.pod
Skip ../blib/lib/Coro/jit-x86-unix.pl (unchanged)
/usr/bin/perl /usr/share/perl/5.18.2/ExtUtils/xsubpp -typemap /usr/share/perl/5.18/ExtUtils/typemap -typemap typemap State.xs > State.xsc && mv State.xsc State.c
Warning: Aliases 'is_zombie' and 'is_destroyed' have identical values in State.xs, line 3666
cc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fstack-protector -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -DVERSION=\"6.39\" -DXS_VERSION=\"6.39\" -fPIC "-I/usr/lib/perl/5.18/CORE" -DCORO_SJLJ -D_FORTIFY_SOURCE=0 -DCORO_STACKSIZE=16384 -DCORO_GUARDPAGES=4 -DCORO_JIT=1 State.c
<command-line>:0:0: warning: "_FORTIFY_SOURCE" redefined [enabled by default]
<command-line>:0:0: note: this is the location of the previous definition
In file included from /usr/lib/perl/5.18/CORE/perl.h:5156:0,
from State.xs:12:
State.xs: In function 'boot_Coro__State':
State.xs:3848:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
sv_setiv (sv, (IV)&coroapi);
^
/usr/lib/perl/5.18/CORE/embed.h:625:46: note: in definition of macro 'sv_setiv'
#define sv_setiv(a,b) Perl_sv_setiv(aTHX_ a,b)
^
Running Mkbootstrap for Coro::State ()
chmod 644 State.bs
rm -f ../blib/arch/auto/Coro/State/State.so
cc -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector State.o -o ../blib/arch/auto/Coro/State/State.so \
\
chmod 755 ../blib/arch/auto/Coro/State/State.so
cp State.bs ../blib/arch/auto/Coro/State/State.bs
chmod 644 ../blib/arch/auto/Coro/State/State.bs
Manifying ../blib/man3/Coro::Socket.3pm
Manifying ../blib/man3/Coro::Specific.3pm
Manifying ../blib/man3/Coro::Timer.3pm
Manifying ../blib/man3/Coro::State.3pm
Manifying ../blib/man3/Coro::BDB.3pm
Manifying ../blib/man3/Coro::Debug.3pm
Manifying ../blib/man3/Coro::MakeMaker.3pm
Manifying ../blib/man3/Coro::Semaphore.3pm
Manifying ../blib/man3/Coro::LWP.3pm
Manifying ../blib/man3/Coro::Channel.3pm
Manifying ../blib/man3/Coro::Select.3pm
Manifying ../blib/man3/Coro::Signal.3pm
Manifying ../blib/man3/Coro::Util.3pm
Manifying ../blib/man3/Coro::AnyEvent.3pm
Manifying ../blib/man3/Coro::RWLock.3pm
Manifying ../blib/man3/Coro::Handle.3pm
Manifying ../blib/man3/Coro::SemaphoreSet.3pm
Manifying ../blib/man3/Coro::AIO.3pm
Manifying ../blib/man3/Coro::Storable.3pm
Manifying ../blib/man3/Coro::Intro.3pm
make[2]: Leaving directory `/«PKGBUILDDIR»/Coro'
make[2]: Entering directory `/«PKGBUILDDIR»/Event'
cp Event.pm ../blib/lib/Coro/Event.pm
/usr/bin/perl /usr/share/perl/5.18.2/ExtUtils/xsubpp -typemap /usr/share/perl/5.18/ExtUtils/typemap Event.xs > Event.xsc && mv Event.xsc Event.c
cc -c -I/usr/lib/perl5/Event -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fstack-protector -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -DVERSION=\"6.39\" -DXS_VERSION=\"6.39\" -fPIC "-I/usr/lib/perl/5.18/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 Event.c
In file included from Event.xs:8:0:
Event.xs: In function 'boot_Coro__Event':
/usr/lib/perl5/Event/EventAPI.h:252:15: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
GEventAPI = (struct EventAPI*) SvIV(sv); \
^
Event.xs:82:9: note: in expansion of macro 'I_EVENT_API'
I_EVENT_API ("Coro::Event");
^
/usr/lib/perl5/Event/EventAPI.h:252:23: warning: format '%d' expects argument of type 'int', but argument 2 has type 'I32' [-Wformat=]
GEventAPI = (struct EventAPI*) SvIV(sv); \
^
Event.xs:82:9: note: in expansion of macro 'I_EVENT_API'
I_EVENT_API ("Coro::Event");
^
In file included from Event.xs:9:0:
../Coro/CoroAPI.h:98:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
GCoroAPI = (struct CoroAPI*) SvIV (sv); \
^
Event.xs:83:2: note: in expansion of macro 'I_CORO_API'
I_CORO_API ("Coro::Event");
^
Running Mkbootstrap for Coro::Event ()
chmod 644 Event.bs
rm -f ../blib/arch/auto/Coro/Event/Event.so
cc -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector Event.o -o ../blib/arch/auto/Coro/Event/Event.so \
\
chmod 755 ../blib/arch/auto/Coro/Event/Event.so
cp Event.bs ../blib/arch/auto/Coro/Event/Event.bs
chmod 644 ../blib/arch/auto/Coro/Event/Event.bs
Manifying ../blib/man3/Coro::Event.3pm
make[2]: Leaving directory `/«PKGBUILDDIR»/Event'
make[2]: Entering directory `/«PKGBUILDDIR»/EV'
cp EV.pm ../blib/lib/Coro/EV.pm
/usr/bin/perl /usr/share/perl/5.18.2/ExtUtils/xsubpp -typemap /usr/share/perl/5.18/ExtUtils/typemap EV.xs > EV.xsc && mv EV.xsc EV.c
cc -c -I/usr/lib/perl5/EV -I/usr/lib/perl5 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fstack-protector -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -DVERSION=\"6.39\" -DXS_VERSION=\"6.39\" -fPIC "-I/usr/lib/perl/5.18/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 EV.c
In file included from EV.xs:9:0:
EV.xs: In function 'boot_Coro__EV':
/usr/lib/perl5/EV/EVAPI.h:195:12: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
GEVAPI = (struct EVAPI*) SvIV (sv); \
^
EV.xs:294:9: note: in expansion of macro 'I_EV_API'
I_EV_API ("Coro::EV");
^
In file included from EV.xs:10:0:
../Coro/CoroAPI.h:98:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
GCoroAPI = (struct CoroAPI*) SvIV (sv); \
^
EV.xs:295:2: note: in expansion of macro 'I_CORO_API'
I_CORO_API ("Coro::EV");
^
Running Mkbootstrap for Coro::EV ()
chmod 644 EV.bs
rm -f ../blib/arch/auto/Coro/EV/EV.so
cc -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector EV.o -o ../blib/arch/auto/Coro/EV/EV.so \
\
chmod 755 ../blib/arch/auto/Coro/EV/EV.so
cp EV.bs ../blib/arch/auto/Coro/EV/EV.bs
chmod 644 ../blib/arch/auto/Coro/EV/EV.bs
Manifying ../blib/man3/Coro::EV.3pm
make[2]: Leaving directory `/«PKGBUILDDIR»/EV'
Manifying blib/man3/Coro.3pm
make[1]: Leaving directory `/«PKGBUILDDIR»'
dh_auto_test -a
make[1]: Entering directory `/«PKGBUILDDIR»'
make[2]: Entering directory `/«PKGBUILDDIR»/Coro'
make[2]: Leaving directory `/«PKGBUILDDIR»/Coro'
make[2]: Entering directory `/«PKGBUILDDIR»/Event'
make[2]: Leaving directory `/«PKGBUILDDIR»/Event'
make[2]: Entering directory `/«PKGBUILDDIR»/EV'
make[2]: Leaving directory `/«PKGBUILDDIR»/EV'
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00_basic.t .......... ok
t/01_process.t ........ ok
t/02_channel.t ........ ok
t/03_channel.t ........ ok
t/04_rwlock.t ......... ok
t/05_specific.t ....... ok
t/06_prio.t ........... ok
t/07_eval.t ........... ok
t/08_join.t ........... ok
t/10_bugs.t ........... ok
t/11_deadlock.t ....... ok
t/12_exit.t ........... ok
t/13_diewarn.t ........ ok
t/14_load.t ........... ok
t/15_semaphore.t ...... ok
t/16_signal.t ......... ok
t/17_rouse.t .......... ok
t/18_winder.t ......... ok
t/19_handle.t ......... ok
t/20_mutual_cancel.t .. ok
All tests successful.
Files=20, Tests=196, 3 wallclock secs ( 0.51 usr 0.06 sys + 2.87 cusr 0.20 csys = 3.64 CPU)
Result: PASS
make[2]: Entering directory `/«PKGBUILDDIR»/Coro'
No tests defined for Coro::State extension.
make[2]: Leaving directory `/«PKGBUILDDIR»/Coro'
make[2]: Entering directory `/«PKGBUILDDIR»/Event'
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, '../blib/lib', '../blib/arch')" t/*.t
t/00_basic.t .... ok
t/01_unblock.t .. ok
All tests successful.
Files=2, Tests=17, 1 wallclock secs ( 0.17 usr 0.00 sys + 0.62 cusr 0.16 csys = 0.95 CPU)
Result: PASS
make[2]: Leaving directory `/«PKGBUILDDIR»/Event'
make[2]: Entering directory `/«PKGBUILDDIR»/EV'
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, '../blib/lib', '../blib/arch')" t/*.t
t/00_basic.t .... ok
t/01_unblock.t .. ok
All tests successful.
Files=2, Tests=17, 0 wallclock secs ( 0.16 usr 0.02 sys + 0.50 cusr 0.17 csys = 0.85 CPU)
Result: PASS
make[2]: Leaving directory `/«PKGBUILDDIR»/EV'
make[1]: Leaving directory `/«PKGBUILDDIR»'
fakeroot debian/rules binary-arch
dh binary-arch
dh_testroot -a
dh_prep -a
dh_auto_install -a
make[1]: Entering directory `/«PKGBUILDDIR»'
make[2]: Entering directory `/«PKGBUILDDIR»/Coro'
make[2]: Leaving directory `/«PKGBUILDDIR»/Coro'
make[2]: Entering directory `/«PKGBUILDDIR»/Event'
make[2]: Leaving directory `/«PKGBUILDDIR»/Event'
make[2]: Entering directory `/«PKGBUILDDIR»/EV'
make[2]: Leaving directory `/«PKGBUILDDIR»/EV'
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/auto/Coro/State/State.so
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/auto/Coro/State/State.bs
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/auto/Coro/Event/Event.so
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/auto/Coro/Event/Event.bs
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/auto/Coro/EV/EV.so
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/auto/Coro/EV/EV.bs
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/MakeMaker.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/Semaphore.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/Signal.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/State.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/Debug.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/CoroAPI.h
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/SemaphoreSet.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/Channel.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/AnyEvent.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/jit-amd64-unix.pl
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/AIO.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/Select.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/BDB.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/Socket.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/Handle.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/jit-x86-unix.pl
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/Specific.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/LWP.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/Timer.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/Storable.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/Util.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/RWLock.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/Intro.pod
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/Event.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/EV.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::Socket.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::Specific.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::Timer.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::State.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::BDB.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::Debug.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::MakeMaker.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::Semaphore.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::LWP.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::Channel.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::Select.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::Signal.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::Util.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::AnyEvent.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::RWLock.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::Handle.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::SemaphoreSet.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::AIO.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::Storable.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::Intro.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::Event.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::EV.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro.3pm
make[1]: Leaving directory `/«PKGBUILDDIR»'
dh_installdocs -a
dh_installchangelogs -a
dh_installexamples -a
dh_installman -a
dh_perl -a
dh_link -a
dh_compress -a
dh_fixperms -a
dh_strip -a
dh_makeshlibs -a
dh_shlibdeps -a
dh_installdeb -a
dh_gencontrol -a
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
dh_md5sums -a
dh_builddeb -a
dpkg-deb: building package `libcoro-perl' in `../libcoro-perl_6.390-1_armhf.deb'.
dpkg-genchanges -B -mRaspbian wandboard test autobuilder <root@raspbian.org> >../libcoro-perl_6.390-1_armhf.changes
dpkg-genchanges: arch-specific upload - not including arch-independent packages
dpkg-genchanges: binary-only upload - not including any source code
dpkg-source --after-build libcoro-perl-6.390
dpkg-buildpackage: binary-only upload (no source included)
────────────────────────────────────────────────────────────────────────────────
Build finished at 20140608-0536
Finished
────────
I: Built successfully
┌──────────────────────────────────────────────────────────────────────────────┐
│ Changes │
└──────────────────────────────────────────────────────────────────────────────┘
libcoro-perl_6.390-1_armhf.changes:
───────────────────────────────────
Format: 1.8
Date: Mon, 02 Jun 2014 19:36:43 +0200
Source: libcoro-perl
Binary: libcoro-perl
Architecture: armhf
Version: 6.390-1
Distribution: jessie-staging
Urgency: medium
Maintainer: Raspbian wandboard test autobuilder <root@raspbian.org>
Changed-By: gregor herrmann <gregoa@debian.org>
Description:
libcoro-perl - Perl framework implementing coroutines
Changes:
libcoro-perl (6.390-1) unstable; urgency=medium
.
* New upstream release.
* Refresh spelling.patch (offset).
* Update copyright years and license terms for Coro/ecb.h.
* Update years of packaging copyright.
Checksums-Sha1:
3dd7993c201d5297ae989eeaf223e25b5a5e7f95 229970 libcoro-perl_6.390-1_armhf.deb
Checksums-Sha256:
9b2e2907f728f25cb529aea8d72f96898eb6302765a7b58d7f9ca7e7635058e5 229970 libcoro-perl_6.390-1_armhf.deb
Files:
cbe5a7f78e747a4b71cc3b9afedf1be8 229970 perl optional libcoro-perl_6.390-1_armhf.deb
┌──────────────────────────────────────────────────────────────────────────────┐
│ Package contents │
└──────────────────────────────────────────────────────────────────────────────┘
libcoro-perl_6.390-1_armhf.deb
──────────────────────────────
new debian package, version 2.0.
size 229970 bytes: control archive=3046 bytes.
1345 bytes, 26 lines control
4972 bytes, 71 lines md5sums
Package: libcoro-perl
Version: 6.390-1
Architecture: armhf
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Installed-Size: 430
Depends: perl (>= 5.18.2-2+b1), perlapi-5.18.2, libc6 (>= 2.4), libanyevent-perl, libcommon-sense-perl, libguard-perl
Recommends: libanyevent-perl (>= 7), libev-perl, libevent-perl, libio-aio-perl (>= 3.1)
Section: perl
Priority: optional
Homepage: https://metacpan.org/release/Coro
Description: Perl framework implementing coroutines
Coro is a collection of modules which manages continuations in general, most
often in the form of cooperative threads (also called coros, or simply "coro"
in the documentation). They do not actually execute at the same time, even on
machines with multiple processors.
.
The specific flavor of thread offered by this module also guarantees you that
it will not switch between threads unless necessary. It switches at easily-
identified points in your program, so locking and parallel access are rarely
an issue, making threaded programming much safer and easier than using other
threading models.
.
Coro provides a full shared address space, which makes communication between
threads very easy. A parallel matrix multiplication benchmark runs over 300
times faster on a single core than perl's ithreads on a quad core using all
four cores.
drwxr-xr-x root/root 0 2014-06-08 05:35 ./
drwxr-xr-x root/root 0 2014-06-08 05:35 ./usr/
drwxr-xr-x root/root 0 2014-06-08 05:35 ./usr/lib/
drwxr-xr-x root/root 0 2014-06-08 05:35 ./usr/lib/perl5/
drwxr-xr-x root/root 0 2014-06-08 05:35 ./usr/lib/perl5/Coro/
-rw-r--r-- root/root 2506 2014-06-01 22:00 ./usr/lib/perl5/Coro/MakeMaker.pm
-rw-r--r-- root/root 4366 2014-06-01 22:00 ./usr/lib/perl5/Coro/Semaphore.pm
-rw-r--r-- root/root 2254 2014-06-01 22:00 ./usr/lib/perl5/Coro/Signal.pm
-rw-r--r-- root/root 18990 2014-06-08 05:34 ./usr/lib/perl5/Coro/State.pm
-rw-r--r-- root/root 16417 2014-06-01 22:00 ./usr/lib/perl5/Coro/Debug.pm
-rw-r--r-- root/root 3737 2012-07-02 20:08 ./usr/lib/perl5/Coro/CoroAPI.h
-rw-r--r-- root/root 4089 2014-06-01 22:00 ./usr/lib/perl5/Coro/SemaphoreSet.pm
-rw-r--r-- root/root 4005 2014-06-01 22:00 ./usr/lib/perl5/Coro/Channel.pm
-rw-r--r-- root/root 13549 2014-06-01 22:00 ./usr/lib/perl5/Coro/AnyEvent.pm
-rwxr-xr-x root/root 2769 2014-06-08 05:34 ./usr/lib/perl5/Coro/jit-amd64-unix.pl
-rw-r--r-- root/root 4602 2014-06-01 22:00 ./usr/lib/perl5/Coro/AIO.pm
-rw-r--r-- root/root 3787 2014-06-01 22:00 ./usr/lib/perl5/Coro/Select.pm
-rw-r--r-- root/root 1476 2014-06-01 22:00 ./usr/lib/perl5/Coro/BDB.pm
-rw-r--r-- root/root 5431 2014-06-01 22:00 ./usr/lib/perl5/Coro/Socket.pm
-rw-r--r-- root/root 13780 2014-06-01 22:00 ./usr/lib/perl5/Coro/Handle.pm
-rwxr-xr-x root/root 2977 2014-06-08 05:34 ./usr/lib/perl5/Coro/jit-x86-unix.pl
-rw-r--r-- root/root 1790 2014-06-01 22:00 ./usr/lib/perl5/Coro/Specific.pm
-rw-r--r-- root/root 3976 2014-06-01 22:00 ./usr/lib/perl5/Coro/LWP.pm
-rw-r--r-- root/root 1617 2014-06-01 22:00 ./usr/lib/perl5/Coro/Timer.pm
-rw-r--r-- root/root 3724 2014-06-01 22:00 ./usr/lib/perl5/Coro/Storable.pm
-rw-r--r-- root/root 5527 2014-06-01 22:00 ./usr/lib/perl5/Coro/Util.pm
-rw-r--r-- root/root 2140 2014-06-01 22:00 ./usr/lib/perl5/Coro/RWLock.pm
-rw-r--r-- root/root 26830 2014-06-08 05:34 ./usr/lib/perl5/Coro/Intro.pod
-rw-r--r-- root/root 5391 2014-06-01 22:00 ./usr/lib/perl5/Coro/Event.pm
-rw-r--r-- root/root 2579 2014-06-01 22:00 ./usr/lib/perl5/Coro/EV.pm
drwxr-xr-x root/root 0 2014-06-08 05:35 ./usr/lib/perl5/auto/
drwxr-xr-x root/root 0 2014-06-08 05:35 ./usr/lib/perl5/auto/Coro/
drwxr-xr-x root/root 0 2014-06-08 05:35 ./usr/lib/perl5/auto/Coro/EV/
-rw-r--r-- root/root 0 2014-06-08 05:35 ./usr/lib/perl5/auto/Coro/EV/EV.bs
-rw-r--r-- root/root 13668 2014-06-08 05:35 ./usr/lib/perl5/auto/Coro/EV/EV.so
drwxr-xr-x root/root 0 2014-06-08 05:35 ./usr/lib/perl5/auto/Coro/Event/
-rw-r--r-- root/root 0 2014-06-08 05:35 ./usr/lib/perl5/auto/Coro/Event/Event.bs
-rw-r--r-- root/root 9556 2014-06-08 05:35 ./usr/lib/perl5/auto/Coro/Event/Event.so
drwxr-xr-x root/root 0 2014-06-08 05:35 ./usr/lib/perl5/auto/Coro/State/
-rw-r--r-- root/root 0 2014-06-08 05:35 ./usr/lib/perl5/auto/Coro/State/State.bs
-rw-r--r-- root/root 63364 2014-06-08 05:35 ./usr/lib/perl5/auto/Coro/State/State.so
-rw-r--r-- root/root 45318 2014-06-08 05:34 ./usr/lib/perl5/Coro.pm
drwxr-xr-x root/root 0 2014-06-08 05:35 ./usr/share/
drwxr-xr-x root/root 0 2014-06-08 05:35 ./usr/share/man/
drwxr-xr-x root/root 0 2014-06-08 05:35 ./usr/share/man/man3/
-rw-r--r-- root/root 2864 2014-06-08 05:35 ./usr/share/man/man3/Coro::Socket.3pm.gz
-rw-r--r-- root/root 2483 2014-06-08 05:35 ./usr/share/man/man3/Coro::Specific.3pm.gz
-rw-r--r-- root/root 2350 2014-06-08 05:35 ./usr/share/man/man3/Coro::Timer.3pm.gz
-rw-r--r-- root/root 9396 2014-06-08 05:35 ./usr/share/man/man3/Coro::State.3pm.gz
-rw-r--r-- root/root 2413 2014-06-08 05:35 ./usr/share/man/man3/Coro::BDB.3pm.gz
-rw-r--r-- root/root 4570 2014-06-08 05:35 ./usr/share/man/man3/Coro::Debug.3pm.gz
-rw-r--r-- root/root 2716 2014-06-08 05:35 ./usr/share/man/man3/Coro::MakeMaker.3pm.gz
-rw-r--r-- root/root 3342 2014-06-08 05:35 ./usr/share/man/man3/Coro::Semaphore.3pm.gz
-rw-r--r-- root/root 3398 2014-06-08 05:35 ./usr/share/man/man3/Coro::LWP.3pm.gz
-rw-r--r-- root/root 3308 2014-06-08 05:35 ./usr/share/man/man3/Coro::Channel.3pm.gz
-rw-r--r-- root/root 2866 2014-06-08 05:35 ./usr/share/man/man3/Coro::Select.3pm.gz
-rw-r--r-- root/root 2658 2014-06-08 05:35 ./usr/share/man/man3/Coro::Signal.3pm.gz
-rw-r--r-- root/root 3256 2014-06-08 05:35 ./usr/share/man/man3/Coro::Util.3pm.gz
-rw-r--r-- root/root 6187 2014-06-08 05:35 ./usr/share/man/man3/Coro::AnyEvent.3pm.gz
-rw-r--r-- root/root 2375 2014-06-08 05:35 ./usr/share/man/man3/Coro::RWLock.3pm.gz
-rw-r--r-- root/root 3963 2014-06-08 05:35 ./usr/share/man/man3/Coro::Handle.3pm.gz
-rw-r--r-- root/root 2883 2014-06-08 05:35 ./usr/share/man/man3/Coro::SemaphoreSet.3pm.gz
-rw-r--r-- root/root 3592 2014-06-08 05:35 ./usr/share/man/man3/Coro::AIO.3pm.gz
-rw-r--r-- root/root 2819 2014-06-08 05:35 ./usr/share/man/man3/Coro::Storable.3pm.gz
-rw-r--r-- root/root 12330 2014-06-08 05:35 ./usr/share/man/man3/Coro::Intro.3pm.gz
-rw-r--r-- root/root 3538 2014-06-08 05:35 ./usr/share/man/man3/Coro::Event.3pm.gz
-rw-r--r-- root/root 2886 2014-06-08 05:35 ./usr/share/man/man3/Coro::EV.3pm.gz
-rw-r--r-- root/root 18121 2014-06-08 05:35 ./usr/share/man/man3/Coro.3pm.gz
drwxr-xr-x root/root 0 2014-06-08 05:35 ./usr/share/doc/
drwxr-xr-x root/root 0 2014-06-08 05:35 ./usr/share/doc/libcoro-perl/
-rw-r--r-- root/root 1207 2008-03-02 16:10 ./usr/share/doc/libcoro-perl/README.linux-glibc
-rw-r--r-- root/root 277 2005-03-03 17:20 ./usr/share/doc/libcoro-perl/README
-rw-r--r-- root/root 6874 2014-06-02 17:36 ./usr/share/doc/libcoro-perl/copyright
drwxr-xr-x root/root 0 2014-06-08 05:35 ./usr/share/doc/libcoro-perl/examples/
-rw-r--r-- root/root 240 2001-07-23 02:14 ./usr/share/doc/libcoro-perl/examples/attributes
-rw-r--r-- root/root 1714 2011-12-12 15:18 ./usr/share/doc/libcoro-perl/examples/bench
-rw-r--r-- root/root 316 2008-11-24 04:56 ./usr/share/doc/libcoro-perl/examples/dns
-rw-r--r-- root/root 1222 2008-11-24 04:56 ./usr/share/doc/libcoro-perl/examples/event
-rw-r--r-- root/root 526 2008-11-24 07:55 ./usr/share/doc/libcoro-perl/examples/lwp
-rw-r--r-- root/root 618 2001-07-17 00:24 ./usr/share/doc/libcoro-perl/examples/prodcons1
-rw-r--r-- root/root 665 2006-11-06 19:40 ./usr/share/doc/libcoro-perl/examples/prodcons2
-rw-r--r-- root/root 620 2006-11-06 19:40 ./usr/share/doc/libcoro-perl/examples/prodcons3
-rw-r--r-- root/root 752 2007-04-14 15:06 ./usr/share/doc/libcoro-perl/examples/readline
-rw-r--r-- root/root 3188 2008-06-03 13:35 ./usr/share/doc/libcoro-perl/examples/myhttpd.gz
-rw-r--r-- root/root 2021 2014-06-02 17:36 ./usr/share/doc/libcoro-perl/changelog.Debian.gz
-rw-r--r-- root/root 227 2014-06-02 17:36 ./usr/share/doc/libcoro-perl/NEWS.Debian.gz
-rw-r--r-- root/root 22645 2014-06-01 22:00 ./usr/share/doc/libcoro-perl/changelog.gz
┌──────────────────────────────────────────────────────────────────────────────┐
│ Post Build │
└──────────────────────────────────────────────────────────────────────────────┘
┌──────────────────────────────────────────────────────────────────────────────┐
│ Cleanup │
└──────────────────────────────────────────────────────────────────────────────┘
Purging /«BUILDDIR»
Not cleaning session: cloned chroot in use
┌──────────────────────────────────────────────────────────────────────────────┐
│ Summary │
└──────────────────────────────────────────────────────────────────────────────┘
Build Architecture: armhf
Build-Space: 3744
Build-Time: 84
Distribution: jessie-staging
Host Architecture: armhf
Install-Time: 164
Job: libcoro-perl_6.390-1
Machine Architecture: armhf
Package: libcoro-perl
Package-Time: 299
Source-Version: 6.390-1
Space: 3744
Status: successful
Version: 6.390-1
────────────────────────────────────────────────────────────────────────────────
Finished at 20140608-0536
Build needed 00:04:59, 3744k disc space