git →
1:2.1.4-2.1 →
armhf → 2015-02-09 06:51:01
sbuild (Debian sbuild) 0.63.2 (18 Aug 2012) on bm-wb-02
╔══════════════════════════════════════════════════════════════════════════════╗
║ git 1:2.1.4-2.1 (armhf) 09 Feb 2015 06:02 ║
╚══════════════════════════════════════════════════════════════════════════════╝
Package: git
Version: 1:2.1.4-2.1
Source Version: 1:2.1.4-2.1
Distribution: jessie-staging
Machine Architecture: armhf
Host Architecture: armhf
Build Architecture: armhf
I: NOTICE: Log filtering will replace 'build/git-F5Hs1H/git-2.1.4' with '«PKGBUILDDIR»'
I: NOTICE: Log filtering will replace 'build/git-F5Hs1H' with '«BUILDDIR»'
I: NOTICE: Log filtering will replace 'var/lib/schroot/mount/jessie-staging-armhf-sbuild-6c5849b6-3d6e-461a-911e-48ff811ecd74' with '«CHROOT»'
┌──────────────────────────────────────────────────────────────────────────────┐
│ Update chroot │
└──────────────────────────────────────────────────────────────────────────────┘
Get:1 http://172.17.0.1 jessie-staging InRelease [11.3 kB]
Get:2 http://172.17.0.1 jessie-staging/main Sources [7722 kB]
Get:3 http://172.17.0.1 jessie-staging/main armhf Packages [8959 kB]
Ign http://172.17.0.1 jessie-staging/main Translation-en
Fetched 16.7 MB in 30s (541 kB/s)
Reading package lists...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Fetch source files │
└──────────────────────────────────────────────────────────────────────────────┘
Check APT
─────────
Checking available source versions...
Download source files with APT
──────────────────────────────
Reading package lists...
Building dependency tree...
Reading state information...
NOTICE: 'git' packaging is maintained in the 'Git' version control system at:
https://repo.or.cz/r/git/debian.git/
Need to get 4013 kB of source archives.
Get:1 http://172.17.0.1/private/ jessie-staging/main git 1:2.1.4-2.1 (dsc) [2775 B]
Get:2 http://172.17.0.1/private/ jessie-staging/main git 1:2.1.4-2.1 (tar) [3545 kB]
Get:3 http://172.17.0.1/private/ jessie-staging/main git 1:2.1.4-2.1 (diff) [465 kB]
Fetched 4013 kB in 0s (4199 kB/s)
Download complete and in download only mode
Check arch
──────────
Merged Build-Depends: build-essential, fakeroot
Filtered Build-Depends: build-essential, fakeroot
dpkg-deb: building package `sbuild-build-depends-core-dummy' in `/«BUILDDIR»/resolver-CwJo0K/apt_archive/sbuild-build-depends-core-dummy.deb'.
OK
Reading package lists...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Install core build dependencies (apt-based resolver) │
└──────────────────────────────────────────────────────────────────────────────┘
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
sbuild-build-depends-core-dummy
debconf: delaying package configuration, since apt-utils is not installed
0 upgraded, 1 newly installed, 0 to remove and 29 not upgraded.
Need to get 0 B/812 B of archives.
After this operation, 0 B of additional disk space will be used.
Selecting previously unselected package sbuild-build-depends-core-dummy.
(Reading database ... 11802 files and directories currently installed.)
Preparing to unpack .../sbuild-build-depends-core-dummy.deb ...
Unpacking sbuild-build-depends-core-dummy (0.invalid.0) ...
Setting up sbuild-build-depends-core-dummy (0.invalid.0) ...
Merged Build-Depends: libc6-dev | libc-dev, gcc (>= 4:4.9.1), g++ (>= 4:4.9.1), make, dpkg-dev (>= 1.17.11), libz-dev, libpcre3-dev, gettext, libcurl4-gnutls-dev, libexpat1-dev, subversion, libsvn-perl, libyaml-perl, tcl, libhttp-date-perl | libtime-modules-perl, python, cvs, cvsps, libdbd-sqlite3-perl, unzip, libio-pty-perl, dpkg-dev (>= 1.16.2~)
Filtered Build-Depends: libc6-dev, gcc (>= 4:4.9.1), g++ (>= 4:4.9.1), make, dpkg-dev (>= 1.17.11), libz-dev, libpcre3-dev, gettext, libcurl4-gnutls-dev, libexpat1-dev, subversion, libsvn-perl, libyaml-perl, tcl, libhttp-date-perl, python, cvs, cvsps, libdbd-sqlite3-perl, unzip, libio-pty-perl, dpkg-dev (>= 1.16.2~)
dpkg-deb: building package `sbuild-build-depends-git-dummy' in `/«BUILDDIR»/resolver-bqBfiT/apt_archive/sbuild-build-depends-git-dummy.deb'.
OK
Reading package lists...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Install git build dependencies (apt-based resolver) │
└──────────────────────────────────────────────────────────────────────────────┘
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
adduser cvs cvsps gettext gettext-base libapr1 libaprutil1 libasprintf0c2
libbsd0 libcroco3 libcurl3-gnutls libcurl4-gnutls-dev libdbd-sqlite3-perl
libdbi-perl libexpat1 libexpat1-dev libffi6 libglib2.0-0 libgnutls-deb0-28
libgssapi-krb5-2 libhogweed2 libhttp-date-perl libidn11 libio-pty-perl
libk5crypto3 libkeyutils1 libkrb5-3 libkrb5support0 libldap-2.4-2 libnettle4
libp11-kit0 libpcre3 libpcre3-dev libpcrecpp0 libpython-stdlib
libpython2.7-minimal libpython2.7-stdlib librtmp1 libsasl2-2
libsasl2-modules-db libserf-1-1 libsqlite3-0 libssh2-1 libssl1.0.0
libsvn-perl libsvn1 libtasn1-6 libtcl8.6 libunistring0 libxml2 libyaml-perl
mime-support python python-minimal python2.7 python2.7-minimal subversion
tcl tcl8.6 unzip zlib1g-dev
Suggested packages:
liblocale-gettext-perl mksh rcs gettext-doc libcurl4-doc libcurl3-dbg
libgnutls28-dev libidn11-dev libkrb5-dev libldap2-dev librtmp-dev
libssh2-1-dev pkg-config libclone-perl libmldbm-perl libnet-daemon-perl
libsql-statement-perl gnutls-bin krb5-doc krb5-user libyaml-shell-perl
python-doc python-tk python2.7-doc binfmt-support subversion-tools
db5.3-util tcl-tclreadline zip
Recommended packages:
openssh-client curl wget lynx-cur autopoint libasprintf-dev libgettextpo-dev
ca-certificates libglib2.0-data shared-mime-info xdg-user-dirs krb5-locales
libsasl2-modules xml-core libyaml-libyaml-perl libyaml-syck-perl file
The following NEW packages will be installed:
adduser cvs cvsps gettext gettext-base libapr1 libaprutil1 libasprintf0c2
libbsd0 libcroco3 libcurl3-gnutls libcurl4-gnutls-dev libdbd-sqlite3-perl
libdbi-perl libexpat1 libexpat1-dev libffi6 libglib2.0-0 libgnutls-deb0-28
libgssapi-krb5-2 libhogweed2 libhttp-date-perl libidn11 libio-pty-perl
libk5crypto3 libkeyutils1 libkrb5-3 libkrb5support0 libldap-2.4-2 libnettle4
libp11-kit0 libpcre3-dev libpcrecpp0 libpython-stdlib libpython2.7-minimal
libpython2.7-stdlib librtmp1 libsasl2-2 libsasl2-modules-db libserf-1-1
libsqlite3-0 libssh2-1 libssl1.0.0 libsvn-perl libsvn1 libtasn1-6 libtcl8.6
libunistring0 libxml2 libyaml-perl mime-support python python-minimal
python2.7 python2.7-minimal sbuild-build-depends-git-dummy subversion tcl
tcl8.6 unzip zlib1g-dev
The following packages will be upgraded:
libpcre3
1 upgraded, 61 newly installed, 0 to remove and 28 not upgraded.
Need to get 21.7 MB/21.7 MB of archives.
After this operation, 65.1 MB of additional disk space will be used.
Get:1 http://172.17.0.1/private/ jessie-staging/main libpcre3 armhf 2:8.35-3.3 [299 kB]
Get:2 http://172.17.0.1/private/ jessie-staging/main libssl1.0.0 armhf 1.0.1k-1 [844 kB]
Get:3 http://172.17.0.1/private/ jessie-staging/main libasprintf0c2 armhf 0.19.3-2 [31.1 kB]
Get:4 http://172.17.0.1/private/ jessie-staging/main libnettle4 armhf 2.7.1-5 [178 kB]
Get:5 http://172.17.0.1/private/ jessie-staging/main libhogweed2 armhf 2.7.1-5 [117 kB]
Get:6 http://172.17.0.1/private/ jessie-staging/main libffi6 armhf 3.1-2 [18.1 kB]
Get:7 http://172.17.0.1/private/ jessie-staging/main libp11-kit0 armhf 0.20.7-1 [66.7 kB]
Get:8 http://172.17.0.1/private/ jessie-staging/main libtasn1-6 armhf 4.2-2 [43.0 kB]
Get:9 http://172.17.0.1/private/ jessie-staging/main libgnutls-deb0-28 armhf 3.3.8-5 [624 kB]
Get:10 http://172.17.0.1/private/ jessie-staging/main libkeyutils1 armhf 1.5.9-5 [10.9 kB]
Get:11 http://172.17.0.1/private/ jessie-staging/main libkrb5support0 armhf 1.12.1+dfsg-17 [54.7 kB]
Get:12 http://172.17.0.1/private/ jessie-staging/main libk5crypto3 armhf 1.12.1+dfsg-17 [108 kB]
Get:13 http://172.17.0.1/private/ jessie-staging/main libkrb5-3 armhf 1.12.1+dfsg-17 [256 kB]
Get:14 http://172.17.0.1/private/ jessie-staging/main libgssapi-krb5-2 armhf 1.12.1+dfsg-17 [129 kB]
Get:15 http://172.17.0.1/private/ jessie-staging/main libidn11 armhf 1.29-1 [132 kB]
Get:16 http://172.17.0.1/private/ jessie-staging/main libsasl2-modules-db armhf 2.1.26.dfsg1-12 [65.4 kB]
Get:17 http://172.17.0.1/private/ jessie-staging/main libsasl2-2 armhf 2.1.26.dfsg1-12 [97.1 kB]
Get:18 http://172.17.0.1/private/ jessie-staging/main libldap-2.4-2 armhf 2.4.40-3 [192 kB]
Get:19 http://172.17.0.1/private/ jessie-staging/main libsqlite3-0 armhf 3.8.7.1-1 [376 kB]
Get:20 http://172.17.0.1/private/ jessie-staging/main libxml2 armhf 2.9.1+dfsg1-4 [698 kB]
Get:21 http://172.17.0.1/private/ jessie-staging/main libpython2.7-minimal armhf 2.7.8-11 [373 kB]
Get:22 http://172.17.0.1/private/ jessie-staging/main python2.7-minimal armhf 2.7.8-11 [1131 kB]
Get:23 http://172.17.0.1/private/ jessie-staging/main libapr1 armhf 1.5.1-3 [77.1 kB]
Get:24 http://172.17.0.1/private/ jessie-staging/main libexpat1 armhf 2.1.0-6 [60.2 kB]
Get:25 http://172.17.0.1/private/ jessie-staging/main libaprutil1 armhf 1.5.4-1 [75.9 kB]
Get:26 http://172.17.0.1/private/ jessie-staging/main libbsd0 armhf 0.7.0-2 [63.7 kB]
Get:27 http://172.17.0.1/private/ jessie-staging/main libglib2.0-0 armhf 2.42.1-1 [2250 kB]
Get:28 http://172.17.0.1/private/ jessie-staging/main libcroco3 armhf 0.6.8-3 [121 kB]
Get:29 http://172.17.0.1/private/ jessie-staging/main librtmp1 armhf 2.4+20131018.git79459a2-5 [53.8 kB]
Get:30 http://172.17.0.1/private/ jessie-staging/main libssh2-1 armhf 1.4.3-4 [113 kB]
Get:31 http://172.17.0.1/private/ jessie-staging/main libcurl3-gnutls armhf 7.38.0-4 [225 kB]
Get:32 http://172.17.0.1/private/ jessie-staging/main libpcrecpp0 armhf 2:8.35-3.3 [139 kB]
Get:33 http://172.17.0.1/private/ jessie-staging/main libserf-1-1 armhf 1.3.8-1 [45.3 kB]
Get:34 http://172.17.0.1/private/ jessie-staging/main libsvn1 armhf 1.8.10-5 [916 kB]
Get:35 http://172.17.0.1/private/ jessie-staging/main libsvn-perl armhf 1.8.10-5 [845 kB]
Get:36 http://172.17.0.1/private/ jessie-staging/main libtcl8.6 armhf 8.6.2+dfsg-1 [843 kB]
Get:37 http://172.17.0.1/private/ jessie-staging/main libunistring0 armhf 0.9.3-5.2 [253 kB]
Get:38 http://172.17.0.1/private/ jessie-staging/main adduser all 3.113+nmu3 [264 kB]
Get:39 http://172.17.0.1/private/ jessie-staging/main gettext-base armhf 0.19.3-2 [116 kB]
Get:40 http://172.17.0.1/private/ jessie-staging/main mime-support all 3.58 [36.0 kB]
Get:41 http://172.17.0.1/private/ jessie-staging/main libpython2.7-stdlib armhf 2.7.8-11 [1805 kB]
Get:42 http://172.17.0.1/private/ jessie-staging/main python2.7 armhf 2.7.8-11 [249 kB]
Get:43 http://172.17.0.1/private/ jessie-staging/main python-minimal armhf 2.7.8-2 [39.9 kB]
Get:44 http://172.17.0.1/private/ jessie-staging/main libpython-stdlib armhf 2.7.8-2 [19.4 kB]
Get:45 http://172.17.0.1/private/ jessie-staging/main python armhf 2.7.8-2 [151 kB]
Get:46 http://172.17.0.1/private/ jessie-staging/main cvs armhf 2:1.12.13+real-15 [2569 kB]
Get:47 http://172.17.0.1/private/ jessie-staging/main cvsps armhf 2.1-6 [46.6 kB]
Get:48 http://172.17.0.1/private/ jessie-staging/main gettext armhf 0.19.3-2 [1167 kB]
Get:49 http://172.17.0.1/private/ jessie-staging/main libcurl4-gnutls-dev armhf 7.38.0-4 [304 kB]
Get:50 http://172.17.0.1/private/ jessie-staging/main libdbi-perl armhf 1.631-3+b1 [807 kB]
Get:51 http://172.17.0.1/private/ jessie-staging/main libdbd-sqlite3-perl armhf 1.44-1 [149 kB]
Get:52 http://172.17.0.1/private/ jessie-staging/main libexpat1-dev armhf 2.1.0-6 [117 kB]
Get:53 http://172.17.0.1/private/ jessie-staging/main libhttp-date-perl all 6.02-1 [10.7 kB]
Get:54 http://172.17.0.1/private/ jessie-staging/main libio-pty-perl armhf 1:1.08-1+b2 [35.0 kB]
Get:55 http://172.17.0.1/private/ jessie-staging/main libpcre3-dev armhf 2:8.35-3.3 [411 kB]
Get:56 http://172.17.0.1/private/ jessie-staging/main libyaml-perl all 1.13-1 [69.7 kB]
Get:57 http://172.17.0.1/private/ jessie-staging/main subversion armhf 1.8.10-5 [908 kB]
Get:58 http://172.17.0.1/private/ jessie-staging/main tcl8.6 armhf 8.6.2+dfsg-1 [122 kB]
Get:59 http://172.17.0.1/private/ jessie-staging/main tcl armhf 8.6.0+8+b1 [5508 B]
Get:60 http://172.17.0.1/private/ jessie-staging/main unzip armhf 6.0-16 [142 kB]
Get:61 http://172.17.0.1/private/ jessie-staging/main zlib1g-dev armhf 1:1.2.8.dfsg-2 [199 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 21.7 MB in 5s (3840 kB/s)
(Reading database ... 11802 files and directories currently installed.)
Preparing to unpack .../libpcre3_2%3a8.35-3.3_armhf.deb ...
Unpacking libpcre3:armhf (2:8.35-3.3) over (1:8.35-3.1) ...
Setting up libpcre3:armhf (2:8.35-3.3) ...
Processing triggers for libc-bin (2.19-13) ...
Selecting previously unselected package libssl1.0.0:armhf.
(Reading database ... 11802 files and directories currently installed.)
Preparing to unpack .../libssl1.0.0_1.0.1k-1_armhf.deb ...
Unpacking libssl1.0.0:armhf (1.0.1k-1) ...
Selecting previously unselected package libasprintf0c2:armhf.
Preparing to unpack .../libasprintf0c2_0.19.3-2_armhf.deb ...
Unpacking libasprintf0c2:armhf (0.19.3-2) ...
Selecting previously unselected package libnettle4:armhf.
Preparing to unpack .../libnettle4_2.7.1-5_armhf.deb ...
Unpacking libnettle4:armhf (2.7.1-5) ...
Selecting previously unselected package libhogweed2:armhf.
Preparing to unpack .../libhogweed2_2.7.1-5_armhf.deb ...
Unpacking libhogweed2:armhf (2.7.1-5) ...
Selecting previously unselected package libffi6:armhf.
Preparing to unpack .../libffi6_3.1-2_armhf.deb ...
Unpacking libffi6:armhf (3.1-2) ...
Selecting previously unselected package libp11-kit0:armhf.
Preparing to unpack .../libp11-kit0_0.20.7-1_armhf.deb ...
Unpacking libp11-kit0:armhf (0.20.7-1) ...
Selecting previously unselected package libtasn1-6:armhf.
Preparing to unpack .../libtasn1-6_4.2-2_armhf.deb ...
Unpacking libtasn1-6:armhf (4.2-2) ...
Selecting previously unselected package libgnutls-deb0-28:armhf.
Preparing to unpack .../libgnutls-deb0-28_3.3.8-5_armhf.deb ...
Unpacking libgnutls-deb0-28:armhf (3.3.8-5) ...
Selecting previously unselected package libkeyutils1:armhf.
Preparing to unpack .../libkeyutils1_1.5.9-5_armhf.deb ...
Unpacking libkeyutils1:armhf (1.5.9-5) ...
Selecting previously unselected package libkrb5support0:armhf.
Preparing to unpack .../libkrb5support0_1.12.1+dfsg-17_armhf.deb ...
Unpacking libkrb5support0:armhf (1.12.1+dfsg-17) ...
Selecting previously unselected package libk5crypto3:armhf.
Preparing to unpack .../libk5crypto3_1.12.1+dfsg-17_armhf.deb ...
Unpacking libk5crypto3:armhf (1.12.1+dfsg-17) ...
Selecting previously unselected package libkrb5-3:armhf.
Preparing to unpack .../libkrb5-3_1.12.1+dfsg-17_armhf.deb ...
Unpacking libkrb5-3:armhf (1.12.1+dfsg-17) ...
Selecting previously unselected package libgssapi-krb5-2:armhf.
Preparing to unpack .../libgssapi-krb5-2_1.12.1+dfsg-17_armhf.deb ...
Unpacking libgssapi-krb5-2:armhf (1.12.1+dfsg-17) ...
Selecting previously unselected package libidn11:armhf.
Preparing to unpack .../libidn11_1.29-1_armhf.deb ...
Unpacking libidn11:armhf (1.29-1) ...
Selecting previously unselected package libsasl2-modules-db:armhf.
Preparing to unpack .../libsasl2-modules-db_2.1.26.dfsg1-12_armhf.deb ...
Unpacking libsasl2-modules-db:armhf (2.1.26.dfsg1-12) ...
Selecting previously unselected package libsasl2-2:armhf.
Preparing to unpack .../libsasl2-2_2.1.26.dfsg1-12_armhf.deb ...
Unpacking libsasl2-2:armhf (2.1.26.dfsg1-12) ...
Selecting previously unselected package libldap-2.4-2:armhf.
Preparing to unpack .../libldap-2.4-2_2.4.40-3_armhf.deb ...
Unpacking libldap-2.4-2:armhf (2.4.40-3) ...
Selecting previously unselected package libsqlite3-0:armhf.
Preparing to unpack .../libsqlite3-0_3.8.7.1-1_armhf.deb ...
Unpacking libsqlite3-0:armhf (3.8.7.1-1) ...
Selecting previously unselected package libxml2:armhf.
Preparing to unpack .../libxml2_2.9.1+dfsg1-4_armhf.deb ...
Unpacking libxml2:armhf (2.9.1+dfsg1-4) ...
Selecting previously unselected package libpython2.7-minimal:armhf.
Preparing to unpack .../libpython2.7-minimal_2.7.8-11_armhf.deb ...
Unpacking libpython2.7-minimal:armhf (2.7.8-11) ...
Selecting previously unselected package python2.7-minimal.
Preparing to unpack .../python2.7-minimal_2.7.8-11_armhf.deb ...
Unpacking python2.7-minimal (2.7.8-11) ...
Selecting previously unselected package libapr1:armhf.
Preparing to unpack .../libapr1_1.5.1-3_armhf.deb ...
Unpacking libapr1:armhf (1.5.1-3) ...
Selecting previously unselected package libexpat1:armhf.
Preparing to unpack .../libexpat1_2.1.0-6_armhf.deb ...
Unpacking libexpat1:armhf (2.1.0-6) ...
Selecting previously unselected package libaprutil1:armhf.
Preparing to unpack .../libaprutil1_1.5.4-1_armhf.deb ...
Unpacking libaprutil1:armhf (1.5.4-1) ...
Selecting previously unselected package libbsd0:armhf.
Preparing to unpack .../libbsd0_0.7.0-2_armhf.deb ...
Unpacking libbsd0:armhf (0.7.0-2) ...
Selecting previously unselected package libglib2.0-0:armhf.
Preparing to unpack .../libglib2.0-0_2.42.1-1_armhf.deb ...
Unpacking libglib2.0-0:armhf (2.42.1-1) ...
Selecting previously unselected package libcroco3:armhf.
Preparing to unpack .../libcroco3_0.6.8-3_armhf.deb ...
Unpacking libcroco3:armhf (0.6.8-3) ...
Selecting previously unselected package librtmp1:armhf.
Preparing to unpack .../librtmp1_2.4+20131018.git79459a2-5_armhf.deb ...
Unpacking librtmp1:armhf (2.4+20131018.git79459a2-5) ...
Selecting previously unselected package libssh2-1:armhf.
Preparing to unpack .../libssh2-1_1.4.3-4_armhf.deb ...
Unpacking libssh2-1:armhf (1.4.3-4) ...
Selecting previously unselected package libcurl3-gnutls:armhf.
Preparing to unpack .../libcurl3-gnutls_7.38.0-4_armhf.deb ...
Unpacking libcurl3-gnutls:armhf (7.38.0-4) ...
Selecting previously unselected package libpcrecpp0:armhf.
Preparing to unpack .../libpcrecpp0_2%3a8.35-3.3_armhf.deb ...
Unpacking libpcrecpp0:armhf (2:8.35-3.3) ...
Selecting previously unselected package libserf-1-1:armhf.
Preparing to unpack .../libserf-1-1_1.3.8-1_armhf.deb ...
Unpacking libserf-1-1:armhf (1.3.8-1) ...
Selecting previously unselected package libsvn1:armhf.
Preparing to unpack .../libsvn1_1.8.10-5_armhf.deb ...
Unpacking libsvn1:armhf (1.8.10-5) ...
Selecting previously unselected package libsvn-perl.
Preparing to unpack .../libsvn-perl_1.8.10-5_armhf.deb ...
Unpacking libsvn-perl (1.8.10-5) ...
Selecting previously unselected package libtcl8.6:armhf.
Preparing to unpack .../libtcl8.6_8.6.2+dfsg-1_armhf.deb ...
Unpacking libtcl8.6:armhf (8.6.2+dfsg-1) ...
Selecting previously unselected package libunistring0:armhf.
Preparing to unpack .../libunistring0_0.9.3-5.2_armhf.deb ...
Unpacking libunistring0:armhf (0.9.3-5.2) ...
Selecting previously unselected package adduser.
Preparing to unpack .../adduser_3.113+nmu3_all.deb ...
Unpacking adduser (3.113+nmu3) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../gettext-base_0.19.3-2_armhf.deb ...
Unpacking gettext-base (0.19.3-2) ...
Selecting previously unselected package mime-support.
Preparing to unpack .../mime-support_3.58_all.deb ...
Unpacking mime-support (3.58) ...
Selecting previously unselected package libpython2.7-stdlib:armhf.
Preparing to unpack .../libpython2.7-stdlib_2.7.8-11_armhf.deb ...
Unpacking libpython2.7-stdlib:armhf (2.7.8-11) ...
Selecting previously unselected package python2.7.
Preparing to unpack .../python2.7_2.7.8-11_armhf.deb ...
Unpacking python2.7 (2.7.8-11) ...
Selecting previously unselected package python-minimal.
Preparing to unpack .../python-minimal_2.7.8-2_armhf.deb ...
Unpacking python-minimal (2.7.8-2) ...
Selecting previously unselected package libpython-stdlib:armhf.
Preparing to unpack .../libpython-stdlib_2.7.8-2_armhf.deb ...
Unpacking libpython-stdlib:armhf (2.7.8-2) ...
Selecting previously unselected package python.
Preparing to unpack .../python_2.7.8-2_armhf.deb ...
Unpacking python (2.7.8-2) ...
Selecting previously unselected package cvs.
Preparing to unpack .../cvs_2%3a1.12.13+real-15_armhf.deb ...
Unpacking cvs (2:1.12.13+real-15) ...
Selecting previously unselected package cvsps.
Preparing to unpack .../archives/cvsps_2.1-6_armhf.deb ...
Unpacking cvsps (2.1-6) ...
Selecting previously unselected package gettext.
Preparing to unpack .../gettext_0.19.3-2_armhf.deb ...
Unpacking gettext (0.19.3-2) ...
Selecting previously unselected package libcurl4-gnutls-dev:armhf.
Preparing to unpack .../libcurl4-gnutls-dev_7.38.0-4_armhf.deb ...
Unpacking libcurl4-gnutls-dev:armhf (7.38.0-4) ...
Selecting previously unselected package libdbi-perl.
Preparing to unpack .../libdbi-perl_1.631-3+b1_armhf.deb ...
Unpacking libdbi-perl (1.631-3+b1) ...
Selecting previously unselected package libdbd-sqlite3-perl.
Preparing to unpack .../libdbd-sqlite3-perl_1.44-1_armhf.deb ...
Unpacking libdbd-sqlite3-perl (1.44-1) ...
Selecting previously unselected package libexpat1-dev:armhf.
Preparing to unpack .../libexpat1-dev_2.1.0-6_armhf.deb ...
Unpacking libexpat1-dev:armhf (2.1.0-6) ...
Selecting previously unselected package libhttp-date-perl.
Preparing to unpack .../libhttp-date-perl_6.02-1_all.deb ...
Unpacking libhttp-date-perl (6.02-1) ...
Selecting previously unselected package libio-pty-perl.
Preparing to unpack .../libio-pty-perl_1%3a1.08-1+b2_armhf.deb ...
Unpacking libio-pty-perl (1:1.08-1+b2) ...
Selecting previously unselected package libpcre3-dev:armhf.
Preparing to unpack .../libpcre3-dev_2%3a8.35-3.3_armhf.deb ...
Unpacking libpcre3-dev:armhf (2:8.35-3.3) ...
Selecting previously unselected package libyaml-perl.
Preparing to unpack .../libyaml-perl_1.13-1_all.deb ...
Unpacking libyaml-perl (1.13-1) ...
Selecting previously unselected package subversion.
Preparing to unpack .../subversion_1.8.10-5_armhf.deb ...
Unpacking subversion (1.8.10-5) ...
Selecting previously unselected package tcl8.6.
Preparing to unpack .../tcl8.6_8.6.2+dfsg-1_armhf.deb ...
Unpacking tcl8.6 (8.6.2+dfsg-1) ...
Selecting previously unselected package tcl.
Preparing to unpack .../tcl_8.6.0+8+b1_armhf.deb ...
Unpacking tcl (8.6.0+8+b1) ...
Selecting previously unselected package unzip.
Preparing to unpack .../unzip_6.0-16_armhf.deb ...
Unpacking unzip (6.0-16) ...
Selecting previously unselected package zlib1g-dev:armhf.
Preparing to unpack .../zlib1g-dev_1%3a1.2.8.dfsg-2_armhf.deb ...
Unpacking zlib1g-dev:armhf (1:1.2.8.dfsg-2) ...
Selecting previously unselected package sbuild-build-depends-git-dummy.
Preparing to unpack .../sbuild-build-depends-git-dummy.deb ...
Unpacking sbuild-build-depends-git-dummy (0.invalid.0) ...
Setting up libssl1.0.0:armhf (1.0.1k-1) ...
Setting up libasprintf0c2:armhf (0.19.3-2) ...
Setting up libnettle4:armhf (2.7.1-5) ...
Setting up libhogweed2:armhf (2.7.1-5) ...
Setting up libffi6:armhf (3.1-2) ...
Setting up libp11-kit0:armhf (0.20.7-1) ...
Setting up libtasn1-6:armhf (4.2-2) ...
Setting up libgnutls-deb0-28:armhf (3.3.8-5) ...
Setting up libkeyutils1:armhf (1.5.9-5) ...
Setting up libkrb5support0:armhf (1.12.1+dfsg-17) ...
Setting up libk5crypto3:armhf (1.12.1+dfsg-17) ...
Setting up libkrb5-3:armhf (1.12.1+dfsg-17) ...
Setting up libgssapi-krb5-2:armhf (1.12.1+dfsg-17) ...
Setting up libidn11:armhf (1.29-1) ...
Setting up libsasl2-modules-db:armhf (2.1.26.dfsg1-12) ...
Setting up libsasl2-2:armhf (2.1.26.dfsg1-12) ...
Setting up libldap-2.4-2:armhf (2.4.40-3) ...
Setting up libsqlite3-0:armhf (3.8.7.1-1) ...
Setting up libxml2:armhf (2.9.1+dfsg1-4) ...
Setting up libpython2.7-minimal:armhf (2.7.8-11) ...
Setting up python2.7-minimal (2.7.8-11) ...
Setting up libapr1:armhf (1.5.1-3) ...
Setting up libexpat1:armhf (2.1.0-6) ...
Setting up libaprutil1:armhf (1.5.4-1) ...
Setting up libbsd0:armhf (0.7.0-2) ...
Setting up libglib2.0-0:armhf (2.42.1-1) ...
No schema files found: doing nothing.
Setting up libcroco3:armhf (0.6.8-3) ...
Setting up librtmp1:armhf (2.4+20131018.git79459a2-5) ...
Setting up libssh2-1:armhf (1.4.3-4) ...
Setting up libcurl3-gnutls:armhf (7.38.0-4) ...
Setting up libpcrecpp0:armhf (2:8.35-3.3) ...
Setting up libserf-1-1:armhf (1.3.8-1) ...
Setting up libsvn1:armhf (1.8.10-5) ...
Setting up libsvn-perl (1.8.10-5) ...
Setting up libtcl8.6:armhf (8.6.2+dfsg-1) ...
Setting up libunistring0:armhf (0.9.3-5.2) ...
Setting up adduser (3.113+nmu3) ...
Setting up gettext-base (0.19.3-2) ...
Setting up mime-support (3.58) ...
Setting up libpython2.7-stdlib:armhf (2.7.8-11) ...
Setting up python2.7 (2.7.8-11) ...
Setting up python-minimal (2.7.8-2) ...
Setting up libpython-stdlib:armhf (2.7.8-2) ...
Setting up python (2.7.8-2) ...
Setting up cvs (2:1.12.13+real-15) ...
Allowing use of questionable username.
Adding group `_cvsadmin' (GID 111) ...
Done.
Setting up cvsps (2.1-6) ...
Setting up gettext (0.19.3-2) ...
Setting up libcurl4-gnutls-dev:armhf (7.38.0-4) ...
Setting up libdbi-perl (1.631-3+b1) ...
Setting up libdbd-sqlite3-perl (1.44-1) ...
Setting up libexpat1-dev:armhf (2.1.0-6) ...
Setting up libhttp-date-perl (6.02-1) ...
Setting up libio-pty-perl (1:1.08-1+b2) ...
Setting up libpcre3-dev:armhf (2:8.35-3.3) ...
Setting up libyaml-perl (1.13-1) ...
Setting up subversion (1.8.10-5) ...
Setting up tcl8.6 (8.6.2+dfsg-1) ...
Setting up tcl (8.6.0+8+b1) ...
Setting up unzip (6.0-16) ...
Setting up zlib1g-dev:armhf (1:1.2.8.dfsg-2) ...
Setting up sbuild-build-depends-git-dummy (0.invalid.0) ...
Processing triggers for libc-bin (2.19-13) ...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Build environment │
└──────────────────────────────────────────────────────────────────────────────┘
Kernel: Linux 3.17-1-armmp armhf (armv7l)
Toolchain package versions: binutils_2.24.90.20141023-1 dpkg-dev_1.17.21 g++-4.9_4.9.1-19 gcc-4.8_4.8.3-13 gcc-4.9_4.9.1-19 libc6-dev_2.19-13 libstdc++-4.9-dev_4.9.1-19 libstdc++6_4.9.1-19 linux-libc-dev_3.16.7-2+rpi1
Package versions: adduser_3.113+nmu3 apt_1.0.9.3 base-files_7.10+rpi1 base-passwd_3.5.37 bash_4.3-11 binutils_2.24.90.20141023-1 bsdutils_1:2.25.2-3 build-essential_11.7 bzip2_1.0.6-7 coreutils_8.23-3 cpio_2.11+dfsg-2 cpp_4:4.9.1-5 cpp-4.8_4.8.3-13 cpp-4.9_4.9.1-19 cvs_2:1.12.13+real-15 cvsps_2.1-6 dash_0.5.7-4 debconf_1.5.54 debfoster_2.7-2 debianutils_4.4 dialog_1.2-20140911-1 diffutils_1:3.3-1 dpkg_1.17.21 dpkg-dev_1.17.21 e2fslibs_1.42.12-1 e2fsprogs_1.42.12-1 fakeroot_1.20.2-1 findutils_4.4.2-9 g++_4:4.9.1-5 g++-4.9_4.9.1-19 gcc_4:4.9.1-5 gcc-4.5-base_4.5.3-12+rpi1 gcc-4.6-base_4.6.4-5+rpi1 gcc-4.7-base_4.7.3-11+rpi1 gcc-4.8_4.8.3-13 gcc-4.8-base_4.8.3-13 gcc-4.9_4.9.1-19 gcc-4.9-base_4.9.1-19 gettext_0.19.3-2 gettext-base_0.19.3-2 gnupg_1.4.18-4 gpgv_1.4.18-4 grep_2.20-4 gzip_1.6-4 hostname_3.15 init_1.22 initscripts_2.88dsf-58 insserv_1.14.0-5 klibc-utils_2.0.4-2+rpi1 kmod_18-3 libacl1_2.2.52-2 libapr1_1.5.1-3 libaprutil1_1.5.4-1 libapt-pkg4.12_1.0.9.3 libasan0_4.8.3-13 libasan1_4.9.1-19 libasprintf0c2_0.19.3-2 libatomic1_4.9.1-19 libattr1_1:2.4.47-2 libaudit-common_1:2.4-1 libaudit1_1:2.4-1 libblkid1_2.25.2-3 libbsd0_0.7.0-2 libbz2-1.0_1.0.6-7 libc-bin_2.19-13 libc-dev-bin_2.19-13 libc6_2.19-13 libc6-dev_2.19-13 libcap2_1:2.24-6 libcgi-pm-perl_4.09-1 libcloog-isl4_0.18.2-1 libcomerr2_1.42.12-1 libcroco3_0.6.8-3 libcurl3-gnutls_7.38.0-4 libcurl4-gnutls-dev_7.38.0-4 libdb5.1_5.1.29-6 libdb5.3_5.3.28-6 libdbd-sqlite3-perl_1.44-1 libdbi-perl_1.631-3+b1 libdbus-1-3_1.8.12-1 libdebconfclient0_0.192 libdpkg-perl_1.17.21 libexpat1_2.1.0-6 libexpat1-dev_2.1.0-6 libfakeroot_1.20.2-1 libffi6_3.1-2 libgc1c2_1:7.2d-6.4 libgcc-4.8-dev_4.8.3-13 libgcc-4.9-dev_4.9.1-19 libgcc1_1:4.9.1-19 libgcrypt20_1.6.2-4 libgdbm3_1.8.3-13.1 libglib2.0-0_2.42.1-1 libgmp10_2:6.0.0+dfsg-4+rpi1 libgnutls-deb0-28_3.3.8-5 libgomp1_4.9.1-19 libgpg-error0_1.17-2 libgssapi-krb5-2_1.12.1+dfsg-17 libhogweed2_2.7.1-5 libhttp-date-perl_6.02-1 libidn11_1.29-1 libio-pty-perl_1:1.08-1+b2 libisl10_0.12.2-2 libk5crypto3_1.12.1+dfsg-17 libkeyutils1_1.5.9-5 libklibc_2.0.4-2+rpi1 libkmod2_18-3 libkrb5-3_1.12.1+dfsg-17 libkrb5support0_1.12.1+dfsg-17 libldap-2.4-2_2.4.40-3 liblzma5_5.1.1alpha+20120614-2 libmount1_2.25.2-3 libmpc3_1.0.2-1 libmpfr4_3.1.2-1 libncurses5_5.9+20140913-1 libncursesw5_5.9+20140913-1 libnettle4_2.7.1-5 libp11-kit0_0.20.7-1 libpackage-constants-perl_0.04-1 libpam-modules_1.1.8-3.1 libpam-modules-bin_1.1.8-3.1 libpam-runtime_1.1.8-3.1 libpam0g_1.1.8-3.1 libpcre3_2:8.35-3.3 libpcre3-dev_2:8.35-3.3 libpcrecpp0_2:8.35-3.3 libpng12-0_1.2.50-2 libprocps0_1:3.3.4-2 libprocps3_2:3.3.9-8 libpython-stdlib_2.7.8-2 libpython2.7-minimal_2.7.8-11 libpython2.7-stdlib_2.7.8-11 libreadline6_6.3-8 librtmp1_2.4+20131018.git79459a2-5 libsasl2-2_2.1.26.dfsg1-12 libsasl2-modules-db_2.1.26.dfsg1-12 libselinux1_2.3-2 libsemanage-common_2.3-1 libsemanage1_2.3-1 libsepol1_2.3-2 libserf-1-1_1.3.8-1 libslang2_2.3.0-2 libsmartcols1_2.25.2-3 libsqlite3-0_3.8.7.1-1 libss2_1.42.12-1 libssh2-1_1.4.3-4 libssl1.0.0_1.0.1k-1 libstdc++-4.9-dev_4.9.1-19 libstdc++6_4.9.1-19 libsvn-perl_1.8.10-5 libsvn1_1.8.10-5 libsystemd0_215-7 libtasn1-6_4.2-2 libtcl8.6_8.6.2+dfsg-1 libtimedate-perl_2.3000-2 libtinfo5_5.9+20140913-1 libubsan0_4.9.1-19 libunistring0_0.9.3-5.2 libusb-0.1-4_2:0.1.12-25 libustr-1.0-1_1.0.4-3 libuuid1_2.25.2-3 libxml2_2.9.1+dfsg1-4 libyaml-perl_1.13-1 linux-libc-dev_3.16.7-2+rpi1 locales_2.19-13 login_1:4.2-3 lsb-base_4.1+Debian13+rpi1+nmu1 make_4.0-8 makedev_2.3.1-93 mawk_1.3.3-17 mime-support_3.58 mount_2.25.2-3 multiarch-support_2.19-13 nano_2.2.6-3 ncurses-base_5.9+20140913-1 ncurses-bin_5.9+20140913-1 passwd_1:4.2-3 patch_2.7.1-6 perl_5.20.1-3 perl-base_5.20.1-3 perl-modules_5.20.1-3 procps_2:3.3.9-8 python_2.7.8-2 python-minimal_2.7.8-2 python2.7_2.7.8-11 python2.7-minimal_2.7.8-11 raspbian-archive-keyring_20120528.2 readline-common_6.3-8 sbuild-build-depends-core-dummy_0.invalid.0 sbuild-build-depends-git-dummy_0.invalid.0 sed_4.2.2-4 sensible-utils_0.0.9 startpar_0.59-3 subversion_1.8.10-5 sysv-rc_2.88dsf-58 sysvinit_2.88dsf-58 sysvinit-core_2.88dsf-58 sysvinit-utils_2.88dsf-58 tar_1.27.1-2 tcl_8.6.0+8+b1 tcl8.6_8.6.2+dfsg-1 tzdata_2014i-1 unzip_6.0-16 util-linux_2.25.2-3 xz-utils_5.1.1alpha+20120614-2 zlib1g_1:1.2.8.dfsg-2 zlib1g-dev_1:1.2.8.dfsg-2
┌──────────────────────────────────────────────────────────────────────────────┐
│ Build │
└──────────────────────────────────────────────────────────────────────────────┘
Unpack source
─────────────
gpgv: keyblock resource `/sbuild-nonexistent/.gnupg/trustedkeys.gpg': file open error
gpgv: Signature made Mon Feb 2 19:59:33 2015 UTC using RSA key ID 7D806442
gpgv: Can't check signature: public key not found
dpkg-source: warning: failed to verify signature on ./git_2.1.4-2.1.dsc
dpkg-source: info: extracting git in git-2.1.4
dpkg-source: info: unpacking git_2.1.4.orig.tar.xz
dpkg-source: info: unpacking git_2.1.4-2.1.debian.tar.xz
Check disc space
────────────────
Sufficient free space for build
User Environment
────────────────
APT_CONFIG=/var/lib/sbuild/apt.conf
COLUMNS=80
CONSOLE=/dev/console
DEB_BUILD_OPTIONS=parallel=4
HOME=/sbuild-nonexistent
INIT_VERSION=sysvinit-2.88
LC_ALL=POSIX
LINES=24
LOGNAME=buildd
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
PREVLEVEL=N
PWD=/
RUNLEVEL=2
SCHROOT_ALIAS_NAME=jessie-staging-armhf-sbuild
SCHROOT_CHROOT_NAME=jessie-staging-armhf-sbuild
SCHROOT_COMMAND=env
SCHROOT_GID=109
SCHROOT_GROUP=buildd
SCHROOT_SESSION_ID=jessie-staging-armhf-sbuild-6c5849b6-3d6e-461a-911e-48ff811ecd74
SCHROOT_UID=104
SCHROOT_USER=buildd
SHELL=/bin/sh
TERM=linux
USER=buildd
init=/sbin/init
previous=N
rootmnt=/root
runlevel=2
dpkg-buildpackage
─────────────────
dpkg-buildpackage: source package git
dpkg-buildpackage: source version 1:2.1.4-2.1
dpkg-buildpackage: source distribution unstable
dpkg-source --before-build git-2.1.4
dpkg-buildpackage: host architecture armhf
fakeroot debian/rules clean
/usr/bin/make clean NO_OPENSSL=1 prefix=/usr gitexecdir=/usr/lib/git-core libexecdir=/usr/lib/git-core mandir=/usr/share/man htmldir=/usr/share/doc/git/html INSTALLDIRS=vendor USE_SRV_RR=1 USE_LIBPCRE=1 SANE_TOOL_PATH= INSTALL=install TAR=tar NO_CROSS_DIRECTORY_HARDLINKS=1 NO_INSTALL_HARDLINKS=1 DEFAULT_PAGER=pager DEFAULT_EDITOR=editor CC='gcc' CFLAGS='-Wall -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2' LDFLAGS='-Wl,-z,relro'
make[1]: Entering directory '/«PKGBUILDDIR»'
GIT_VERSION = 2.1.4
rm -f /«PKGBUILDDIR»/./*.gcda /«PKGBUILDDIR»/block-sha1/*.gcda /«PKGBUILDDIR»/builtin/*.gcda /«PKGBUILDDIR»/compat/*.gcda /«PKGBUILDDIR»/ewah/*.gcda /«PKGBUILDDIR»/vcs-svn/*.gcda /«PKGBUILDDIR»/xdiff/*.gcda
rm -f ./*.gcov block-sha1/*.gcov builtin/*.gcov compat/*.gcov ewah/*.gcov vcs-svn/*.gcov xdiff/*.gcov
rm -f /«PKGBUILDDIR»/./*.gcno /«PKGBUILDDIR»/block-sha1/*.gcno /«PKGBUILDDIR»/builtin/*.gcno /«PKGBUILDDIR»/compat/*.gcno /«PKGBUILDDIR»/ewah/*.gcno /«PKGBUILDDIR»/vcs-svn/*.gcno /«PKGBUILDDIR»/xdiff/*.gcno
rm -f ./*.gcda block-sha1/*.gcda builtin/*.gcda compat/*.gcda ewah/*.gcda vcs-svn/*.gcda xdiff/*.gcda
rm -f coverage-untested-functions
rm -f -r cover_db/
rm -f -r cover_db_html/
rm -f ./*.gcno block-sha1/*.gcno builtin/*.gcno compat/*.gcno ewah/*.gcno vcs-svn/*.gcno xdiff/*.gcno
rm -f *.o *.res block-sha1/*.o ppc/*.o compat/*.o compat/*/*.o
rm -f xdiff/*.o vcs-svn/*.o ewah/*.o builtin/*.o
rm -f libgit.a xdiff/lib.a vcs-svn/lib.a
rm -f git-credential-store git-daemon git-fast-import git-http-backend git-imap-send git-sh-i18n--envsubst git-shell git-show-index git-upload-pack git-remote-testsvn git-http-fetch git-http-push git-credential-cache git-credential-cache--daemon git-remote-http git-remote-https git-remote-ftp git-remote-ftps git-am git-bisect git-difftool--helper git-filter-branch git-merge-octopus git-merge-one-file git-merge-resolve git-mergetool git-pull git-quiltimport git-rebase git-request-pull git-stash git-submodule git-web--browse git-add--interactive git-difftool git-archimport git-cvsexportcommit git-cvsimport git-cvsserver git-relink git-send-email git-svn git-p4 git-instaweb git-mergetool--lib git-parse-remote git-rebase--am git-rebase--interactive git-rebase--merge git-sh-setup git-sh-i18n git-add git-annotate git-apply git-archive git-bisect--helper git-blame git-branch git-bundle git-cat-file git-check-attr git-check-ignore git-check-mailmap git-check-ref-format git-checkout-index git-checkout git-clean git-clone git-column git-commit-tree git-commit git-config git-count-objects git-credential git-describe git-diff-files git-diff-index git-diff-tree git-diff git-fast-export git-fetch-pack git-fetch git-fmt-merge-msg git-for-each-ref git-fsck git-gc git-get-tar-commit-id git-grep git-hash-object git-help git-index-pack git-init-db git-log git-ls-files git-ls-remote git-ls-tree git-mailinfo git-mailsplit git-merge git-merge-base git-merge-file git-merge-index git-merge-ours git-merge-recursive git-merge-tree git-mktag git-mktree git-mv git-name-rev git-notes git-pack-objects git-pack-redundant git-pack-refs git-patch-id git-prune-packed git-prune git-push git-read-tree git-receive-pack git-reflog git-remote git-remote-ext git-remote-fd git-repack git-replace git-rerere git-reset git-rev-list git-rev-parse git-revert git-rm git-send-pack git-shortlog git-show-branch git-show-ref git-stripspace git-symbolic-ref git-tag git-unpack-file git-unpack-objects git-update-index git-update-ref git-update-server-info git-upload-archive git-var git-verify-commit git-verify-pack git-verify-tag git-write-tree git-cherry git-cherry-pick git-format-patch git-fsck-objects git-init git-merge-subtree git-show git-stage git-status git-whatchanged git
rm -f test-chmtime test-ctype test-date test-delta test-dump-cache-tree test-dump-split-index test-genrandom test-hashmap test-index-version test-line-buffer test-match-trees test-mergesort test-mktemp test-parse-options test-path-utils test-prio-queue test-read-cache test-regex test-revision-walking test-run-command test-scrap-cache-tree test-sha1 test-sigchain test-string-list test-subprocess test-svn-fe test-urlmatch-normalization test-wildmatch git-remote-testgit
rm -f -r bin-wrappers ./.depend block-sha1/.depend builtin/.depend compat/.depend ewah/.depend vcs-svn/.depend xdiff/.depend
rm -f -r po/build/
rm -f *.spec *.pyc *.pyo */*.pyc */*.pyo common-cmds.h TAGS tags cscope*
rm -f -r git-2.1.4 .doc-tmp-dir
rm -f git-2.1.4.tar.gz git-core_2.1.4-*.tar.gz
rm -f git-htmldocs-2.1.4.tar.gz git-manpages-2.1.4.tar.gz
/usr/bin/make -C Documentation/ clean
make[2]: Entering directory '/«PKGBUILDDIR»/Documentation'
GEN mergetools-list.made
GEN cmd-list.made
make[3]: Entering directory '/«PKGBUILDDIR»'
GEN doc.dep
make[3]: 'GIT-VERSION-FILE' is up to date.
make[3]: Leaving directory '/«PKGBUILDDIR»'
make[3]: Entering directory '/«PKGBUILDDIR»'
make[3]: 'GIT-VERSION-FILE' is up to date.
make[3]: Leaving directory '/«PKGBUILDDIR»'
rm -f *.xml *.xml+ *.html *.html+ *.1 *.5 *.7
rm -f *.texi *.texi+ *.texi++ git.info gitman.info
rm -f *.pdf
rm -f howto-index.txt howto/*.html doc.dep
rm -f technical/*.html technical/api-index.txt
rm -f cmds-ancillaryinterrogators.txt cmds-ancillarymanipulators.txt cmds-mainporcelain.txt cmds-plumbinginterrogators.txt cmds-plumbingmanipulators.txt cmds-synchingrepositories.txt cmds-synchelpers.txt cmds-purehelpers.txt cmds-foreignscminterface.txt mergetools-diff.txt mergetools-merge.txt *.made
rm -f manpage-base-url.xsl
make[2]: Leaving directory '/«PKGBUILDDIR»/Documentation'
/usr/bin/make -C gitweb clean
make[2]: Entering directory '/«PKGBUILDDIR»/gitweb'
make[3]: Entering directory '/«PKGBUILDDIR»'
make[3]: 'GIT-VERSION-FILE' is up to date.
make[3]: Leaving directory '/«PKGBUILDDIR»'
rm -f gitweb.cgi static/gitweb.js \
static/gitweb.min.js static/gitweb.min.css \
GITWEB-BUILD-OPTIONS
make[2]: Leaving directory '/«PKGBUILDDIR»/gitweb'
/usr/bin/make -C perl clean
make[2]: Entering directory '/«PKGBUILDDIR»/perl'
rm -f ppport.h
rm -f perl.mak
rm -f perl.mak.old
rm -f PM.stamp
make[2]: Leaving directory '/«PKGBUILDDIR»/perl'
/usr/bin/make -C templates/ clean
make[2]: Entering directory '/«PKGBUILDDIR»/templates'
rm -f -r blt boilerplates.made
make[2]: Leaving directory '/«PKGBUILDDIR»/templates'
/usr/bin/make -C t/ clean
make[2]: Entering directory '/«PKGBUILDDIR»/t'
rm -f -r 'trash directory'.* 'test-results'
rm -f -r valgrind/bin
rm -f .prove
make[2]: Leaving directory '/«PKGBUILDDIR»/t'
/usr/bin/make -C gitk-git clean
make[2]: Entering directory '/«PKGBUILDDIR»/gitk-git'
rm -f gitk-wish po/*.msg GIT-TCLTK-VARS
make[2]: Leaving directory '/«PKGBUILDDIR»/gitk-git'
/usr/bin/make -C git-gui clean
make[2]: Entering directory '/«PKGBUILDDIR»/git-gui'
GITGUI_VERSION = 0.19.0.2.g3decb8e
rm -rf git-gui lib/tclIndex po/*.msg
rm -rf GIT-VERSION-FILE GIT-GUI-VARS
make[2]: Leaving directory '/«PKGBUILDDIR»/git-gui'
rm -f GIT-VERSION-FILE GIT-CFLAGS GIT-LDFLAGS GIT-BUILD-OPTIONS
rm -f GIT-USER-AGENT GIT-PREFIX
rm -f GIT-SCRIPT-DEFINES GIT-PERL-DEFINES GIT-PYTHON-VARS
make[1]: Leaving directory '/«PKGBUILDDIR»'
! test -e patch-stamp || \
{ \
set -e; \
/usr/bin/make -Ccontrib/mw-to-git clean NO_OPENSSL=1 prefix=/usr gitexecdir=/usr/lib/git-core libexecdir=/usr/lib/git-core mandir=/usr/share/man htmldir=/usr/share/doc/git/html INSTALLDIRS=vendor USE_SRV_RR=1 USE_LIBPCRE=1 SANE_TOOL_PATH= INSTALL=install TAR=tar NO_CROSS_DIRECTORY_HARDLINKS=1 NO_INSTALL_HARDLINKS=1 DEFAULT_PAGER=pager DEFAULT_EDITOR=editor CC='gcc' CFLAGS='-Wall -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2' LDFLAGS='-Wl,-z,relro'; \
for i in `ls -1r debian/diff/*.diff debian/diff/*.patch \
2>/dev/null || :`; do \
patch -p1 -NR -r- <$i || test $? = 1 || exit 1; \
done; \
}
rm -rf '/«PKGBUILDDIR»/tmp'
rm -f patch-stamp build-arch-stamp build-indep-stamp
set -e; \
for i in '' -doc -arch -cvs -svn -mediawiki -daemon-run -daemon-sysvinit -email -gui k web -all -el -man -core; do \
rm -rf '/«PKGBUILDDIR»/debian/git'$i; \
done
rm -f debian/files debian/substvars
rm -f git-subtree
debian/rules build-arch
for i in `ls -1 debian/diff/*.diff debian/diff/*.patch \
2>/dev/null || :`; do \
patch -p1 -N -r- <$i || test $? = 1 || exit 1; \
done
patching file templates/hooks--pre-rebase.sample
patching file Makefile
patching file connect.c
patching file tcp.c
patching file tcp.h
patching file daemon.c
patching file daemon.c
patching file tcp.c
patching file tcp.h
patching file Makefile
patching file dns-ipv4.c
patching file dns-ipv4.h
patching file dns-ipv6.c
patching file dns-ipv6.h
patching file tcp.c
patching file dns-ipv4.h
patching file dns-ipv6.c
patching file tcp.c
patching file Makefile
patching file srv.c
patching file srv.h
patching file tcp.c
patching file srv.c
patching file perl/Git/SVN/Ra.pm
patching file gitweb/gitweb.perl
touch patch-stamp
gcc -v
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/arm-linux-gnueabihf/4.9/lto-wrapper
Target: arm-linux-gnueabihf
Configured with: ../src/configure -v --with-pkgversion='Raspbian 4.9.1-19' --with-bugurl=file:///usr/share/doc/gcc-4.9/README.Bugs --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.9 --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.9 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --disable-libitm --disable-libquadmath --enable-plugin --with-system-zlib --disable-browser-plugin --enable-java-awt=gtk --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-4.9-armhf/jre --enable-java-home --with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-4.9-armhf --with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-4.9-armhf --with-arch-directory=arm --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc --enable-multiarch --disable-sjlj-exceptions --with-arch=armv6 --with-fpu=vfp --with-float=hard --enable-checking=release --build=arm-linux-gnueabihf --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf
Thread model: posix
gcc version 4.9.1 (Raspbian 4.9.1-19)
DESTDIR='/«PKGBUILDDIR»/debian/git' /usr/bin/make all NO_OPENSSL=1 prefix=/usr gitexecdir=/usr/lib/git-core libexecdir=/usr/lib/git-core mandir=/usr/share/man htmldir=/usr/share/doc/git/html INSTALLDIRS=vendor USE_SRV_RR=1 USE_LIBPCRE=1 SANE_TOOL_PATH= INSTALL=install TAR=tar NO_CROSS_DIRECTORY_HARDLINKS=1 NO_INSTALL_HARDLINKS=1 DEFAULT_PAGER=pager DEFAULT_EDITOR=editor CC='gcc' CFLAGS='-Wall -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2' LDFLAGS='-Wl,-z,relro'
make[1]: Entering directory '/«PKGBUILDDIR»'
GIT_VERSION = 2.1.4
* new build flags
* new link flags
* new prefix flags
GEN common-cmds.h
CC hex.o
CC ident.o
CC kwset.o
CC levenshtein.o
CC line-log.o
CC line-range.o
CC list-objects.o
CC ll-merge.o
CC lockfile.o
CC log-tree.o
CC mailmap.o
CC match-trees.o
CC merge.o
CC merge-blobs.o
CC merge-recursive.o
CC mergesort.o
CC name-hash.o
CC notes.o
CC notes-cache.o
CC notes-merge.o
CC notes-utils.o
CC object.o
CC pack-bitmap.o
CC pack-bitmap-write.o
CC pack-check.o
CC pack-objects.o
CC pack-revindex.o
CC pack-write.o
CC pager.o
CC parse-options.o
CC parse-options-cb.o
CC patch-delta.o
CC patch-ids.o
CC path.o
CC pathspec.o
CC pkt-line.o
CC preload-index.o
CC pretty.o
CC prio-queue.o
CC progress.o
CC prompt.o
CC quote.o
CC reachable.o
CC read-cache.o
CC reflog-walk.o
CC refs.o
CC remote.o
CC replace_object.o
CC rerere.o
CC resolve-undo.o
CC revision.o
CC run-command.o
CC send-pack.o
CC sequencer.o
CC server-info.o
CC setup.o
CC sha1-array.o
CC sha1-lookup.o
CC sha1_file.o
CC sha1_name.o
CC shallow.o
CC sideband.o
CC sigchain.o
CC split-index.o
CC strbuf.o
CC streaming.o
CC string-list.o
CC submodule.o
CC symlinks.o
CC tag.o
CC tcp.o
CC trace.o
CC transport.o
CC transport-helper.o
CC tree-diff.o
CC tree.o
CC tree-walk.o
CC unpack-trees.o
CC url.o
CC urlmatch.o
CC usage.o
CC userdiff.o
CC utf8.o
CC varint.o
CC versioncmp.o
CC walker.o
CC wildmatch.o
CC wrapper.o
CC write_or_die.o
CC ws.o
CC wt-status.o
CC xdiff-interface.o
CC zlib.o
CC srv.o
CC dns-ipv6.o
CC unix-socket.o
CC block-sha1/sha1.o
CC thread-utils.o
CC compat/strlcpy.o
CC xdiff/xdiffi.o
CC xdiff/xprepare.o
CC xdiff/xutils.o
CC xdiff/xemit.o
CC xdiff/xmerge.o
CC xdiff/xpatience.o
CC xdiff/xhistogram.o
CC daemon.o
CC fast-import.o
CC http-backend.o
CC imap-send.o
CC sh-i18n--envsubst.o
CC shell.o
CC show-index.o
CC upload-pack.o
CC remote-testsvn.o
CC vcs-svn/line_buffer.o
CC vcs-svn/sliding_window.o
CC vcs-svn/repo_tree.o
CC vcs-svn/fast_export.o
CC vcs-svn/svndiff.o
CC vcs-svn/svndump.o
CC http.o
CC http-walker.o
CC http-fetch.o
CC http-push.o
CC credential-cache.o
CC credential-cache--daemon.o
CC remote-curl.o
* new script parameters
GEN perl/PM.stamp
* new perl-specific parameters
* new Python interpreter location
make[2]: Entering directory '/«PKGBUILDDIR»/gitweb'
make[3]: Entering directory '/«PKGBUILDDIR»'
make[3]: 'GIT-VERSION-FILE' is up to date.
make[3]: Leaving directory '/«PKGBUILDDIR»'
GEN static/gitweb.js
GEN gitweb.cgi
make[2]: Leaving directory '/«PKGBUILDDIR»/gitweb'
GEN git-mergetool--lib
GEN git-parse-remote
GEN git-rebase--am
GEN git-rebase--interactive
GEN git-rebase--merge
GEN git-sh-setup
GEN git-sh-i18n
CC git.o
CC builtin/add.o
CC builtin/annotate.o
CC builtin/apply.o
CC builtin/archive.o
CC builtin/bisect--helper.o
CC builtin/blame.o
CC builtin/branch.o
CC builtin/bundle.o
CC builtin/cat-file.o
CC builtin/check-attr.o
CC builtin/check-ignore.o
CC builtin/check-mailmap.o
CC builtin/check-ref-format.o
CC builtin/checkout-index.o
CC builtin/checkout.o
CC builtin/clean.o
CC builtin/clone.o
CC builtin/column.o
CC builtin/commit-tree.o
CC builtin/commit.o
CC builtin/config.o
CC builtin/count-objects.o
CC builtin/credential.o
CC builtin/describe.o
CC builtin/diff-files.o
CC builtin/diff-index.o
CC builtin/diff-tree.o
CC builtin/diff.o
CC builtin/fast-export.o
CC builtin/fetch-pack.o
CC builtin/fetch.o
CC builtin/fmt-merge-msg.o
CC builtin/for-each-ref.o
CC builtin/fsck.o
CC builtin/gc.o
CC builtin/get-tar-commit-id.o
CC builtin/grep.o
CC builtin/hash-object.o
CC builtin/help.o
CC builtin/index-pack.o
CC builtin/init-db.o
CC builtin/log.o
CC builtin/ls-files.o
CC builtin/ls-remote.o
CC builtin/ls-tree.o
CC builtin/mailinfo.o
CC builtin/mailsplit.o
CC builtin/merge.o
CC builtin/merge-base.o
CC builtin/merge-file.o
CC builtin/merge-index.o
CC builtin/merge-ours.o
CC builtin/merge-recursive.o
CC builtin/merge-tree.o
CC builtin/mktag.o
CC builtin/mktree.o
CC builtin/mv.o
CC builtin/name-rev.o
CC builtin/notes.o
CC builtin/pack-objects.o
CC builtin/pack-redundant.o
CC builtin/pack-refs.o
CC builtin/patch-id.o
CC builtin/prune-packed.o
CC builtin/prune.o
CC builtin/push.o
CC builtin/read-tree.o
CC builtin/receive-pack.o
CC builtin/reflog.o
CC builtin/remote.o
CC builtin/remote-ext.o
CC builtin/remote-fd.o
CC builtin/repack.o
CC builtin/replace.o
CC builtin/rerere.o
CC builtin/reset.o
CC builtin/rev-list.o
CC builtin/rev-parse.o
CC builtin/revert.o
CC builtin/rm.o
CC builtin/send-pack.o
CC builtin/shortlog.o
CC builtin/show-branch.o
CC builtin/show-ref.o
CC builtin/stripspace.o
CC builtin/symbolic-ref.o
CC builtin/tag.o
CC builtin/unpack-file.o
CC builtin/unpack-objects.o
CC builtin/update-index.o
CC builtin/update-ref.o
CC builtin/update-server-info.o
CC builtin/upload-archive.o
CC builtin/var.o
CC builtin/verify-commit.o
CC builtin/verify-pack.o
CC builtin/verify-tag.o
CC builtin/write-tree.o
MSGFMT po/build/locale/pt_PT/LC_MESSAGES/git.mo
306 translated messages, 687 untranslated messages.
MSGFMT po/build/locale/de/LC_MESSAGES/git.mo
2255 translated messages, 2 untranslated messages.
MSGFMT po/build/locale/vi/LC_MESSAGES/git.mo
MSGFMT po/build/locale/is/LC_MESSAGES/git.mo
MSGFMT po/build/locale/ca/LC_MESSAGES/git.mo
14 translated messages.
MSGFMT po/build/locale/sv/LC_MESSAGES/git.mo
MSGFMT po/build/locale/fr/LC_MESSAGES/git.mo
2257 translated messages.
2257 translated messages.
MSGFMT po/build/locale/it/LC_MESSAGES/git.mo
MSGFMT po/build/locale/bg/LC_MESSAGES/git.mo
2257 translated messages.
MSGFMT po/build/locale/zh_CN/LC_MESSAGES/git.mo
2257 translated messages.
CC test-chmtime.o
716 translated messages, 350 untranslated messages.
CC test-ctype.o
2257 translated messages.
CC test-date.o
2257 translated messages.
CC test-delta.o
CC test-dump-cache-tree.o
CC test-dump-split-index.o
CC test-genrandom.o
CC test-hashmap.o
CC test-index-version.o
CC test-line-buffer.o
CC test-match-trees.o
CC test-mergesort.o
CC test-mktemp.o
CC test-parse-options.o
CC test-path-utils.o
CC test-prio-queue.o
CC test-read-cache.o
CC test-regex.o
CC test-revision-walking.o
CC test-run-command.o
CC test-scrap-cache-tree.o
CC test-sha1.o
CC test-sigchain.o
CC test-string-list.o
CC test-subprocess.o
CC test-svn-fe.o
CC test-urlmatch-normalization.o
CC test-wildmatch.o
GEN bin-wrappers/git
GEN bin-wrappers/git-upload-pack
GEN bin-wrappers/git-receive-pack
GEN bin-wrappers/git-upload-archive
GEN bin-wrappers/git-shell
GEN bin-wrappers/git-cvsserver
GEN bin-wrappers/test-chmtime
GEN bin-wrappers/test-ctype
GEN bin-wrappers/test-date
GEN bin-wrappers/test-delta
GEN bin-wrappers/test-dump-cache-tree
GEN bin-wrappers/test-dump-split-index
GEN bin-wrappers/test-genrandom
GEN bin-wrappers/test-hashmap
GEN bin-wrappers/test-index-version
GEN bin-wrappers/test-line-buffer
GEN bin-wrappers/test-match-trees
GEN bin-wrappers/test-mergesort
GEN bin-wrappers/test-mktemp
GEN bin-wrappers/test-parse-options
GEN bin-wrappers/test-path-utils
GEN bin-wrappers/test-prio-queue
GEN bin-wrappers/test-read-cache
GEN bin-wrappers/test-regex
GEN bin-wrappers/test-revision-walking
GEN bin-wrappers/test-run-command
GEN bin-wrappers/test-scrap-cache-tree
GEN bin-wrappers/test-sha1
GEN bin-wrappers/test-sigchain
GEN bin-wrappers/test-string-list
GEN bin-wrappers/test-subprocess
GEN bin-wrappers/test-svn-fe
GEN bin-wrappers/test-urlmatch-normalization
GEN bin-wrappers/test-wildmatch
GEN git-remote-testgit
CC credential-store.o
CC abspath.o
CC advice.o
CC alias.o
CC alloc.o
CC archive.o
CC archive-tar.o
CC archive-zip.o
CC argv-array.o
CC attr.o
CC base85.o
CC bisect.o
CC blob.o
CC branch.o
CC bulk-checkin.o
CC bundle.o
CC cache-tree.o
CC color.o
CC column.o
CC combine-diff.o
CC commit.o
CC compat/obstack.o
CC compat/terminal.o
CC config.o
CC connect.o
CC connected.o
CC convert.o
CC copy.o
CC credential.o
CC csum-file.o
CC ctype.o
CC date.o
CC decorate.o
CC diffcore-break.o
CC diffcore-delta.o
CC diffcore-order.o
CC diffcore-pickaxe.o
CC diffcore-rename.o
CC diff-delta.o
CC diff-lib.o
CC diff-no-index.o
CC diff.o
CC dir.o
CC editor.o
CC entry.o
CC environment.o
CC ewah/bitmap.o
CC ewah/ewah_bitmap.o
CC ewah/ewah_io.o
CC ewah/ewah_rlw.o
CC exec_cmd.o
CC fetch-pack.o
CC fsck.o
CC gettext.o
CC gpg-interface.o
CC graph.o
CC grep.o
CC hashmap.o
CC help.o
CC version.o
AR xdiff/lib.a
AR vcs-svn/lib.a
GEN git-am
GEN git-bisect
GEN git-difftool--helper
GEN git-filter-branch
GEN git-merge-octopus
GEN git-merge-one-file
GEN git-merge-resolve
GEN git-mergetool
GEN git-pull
GEN git-quiltimport
GEN git-rebase
GEN git-request-pull
GEN git-stash
GEN git-submodule
GEN git-web--browse
make[2]: Entering directory '/«PKGBUILDDIR»/perl'
/usr/bin/perl Makefile.PL PREFIX='/usr' INSTALL_BASE='' --localedir='/usr/share/locale'
GEN git-p4
GEN git-instaweb
Generating a Unix-style perl.mak
Writing perl.mak for Git
Writing MYMETA.yml and MYMETA.json
make[2]: Leaving directory '/«PKGBUILDDIR»/perl'
GEN git-add--interactive
GEN git-difftool
GEN git-archimport
GEN git-cvsexportcommit
GEN git-cvsimport
GEN git-cvsserver
GEN git-relink
GEN git-send-email
GEN git-svn
AR libgit.a
LINK git-credential-store
LINK git-daemon
LINK git-fast-import
LINK git-http-backend
LINK git-imap-send
LINK git-sh-i18n--envsubst
LINK git-shell
LINK git-show-index
LINK git-upload-pack
LINK git-remote-testsvn
LINK git-http-fetch
LINK git-http-push
LINK git-credential-cache
LINK git-credential-cache--daemon
LINK git-remote-http
LINK git
LINK test-chmtime
LINK test-ctype
LINK test-date
LINK test-delta
LINK test-dump-cache-tree
LINK test-dump-split-index
LINK test-genrandom
LINK test-hashmap
LINK test-index-version
LINK test-line-buffer
LINK test-match-trees
LINK test-mergesort
LINK test-mktemp
LINK test-parse-options
LINK test-path-utils
LINK test-prio-queue
LINK test-read-cache
LINK test-regex
LINK test-revision-walking
LINK test-run-command
LINK test-scrap-cache-tree
LINK test-sha1
LINK test-sigchain
LINK test-string-list
LINK test-subprocess
LINK test-svn-fe
LINK test-urlmatch-normalization
LINK test-wildmatch
LN/CP git-remote-https
LN/CP git-remote-ftp
LN/CP git-remote-ftps
BUILTIN git-add
BUILTIN git-annotate
BUILTIN git-apply
BUILTIN git-archive
BUILTIN git-bisect--helper
BUILTIN git-blame
BUILTIN git-branch
BUILTIN git-bundle
BUILTIN git-cat-file
BUILTIN git-check-attr
BUILTIN git-check-ignore
BUILTIN git-check-mailmap
BUILTIN git-check-ref-format
BUILTIN git-checkout-index
BUILTIN git-checkout
BUILTIN git-clean
BUILTIN git-clone
BUILTIN git-column
BUILTIN git-commit-tree
BUILTIN git-commit
BUILTIN git-config
BUILTIN git-count-objects
BUILTIN git-credential
BUILTIN git-describe
BUILTIN git-diff-files
BUILTIN git-diff-index
BUILTIN git-diff-tree
BUILTIN git-diff
BUILTIN git-fast-export
BUILTIN git-fetch-pack
BUILTIN git-fetch
BUILTIN git-fmt-merge-msg
BUILTIN git-for-each-ref
BUILTIN git-gc
BUILTIN git-fsck
BUILTIN git-get-tar-commit-id
BUILTIN git-grep
BUILTIN git-hash-object
BUILTIN git-help
BUILTIN git-index-pack
BUILTIN git-init-db
BUILTIN git-log
BUILTIN git-ls-files
BUILTIN git-ls-remote
BUILTIN git-ls-tree
BUILTIN git-mailinfo
BUILTIN git-mailsplit
BUILTIN git-merge
BUILTIN git-merge-base
BUILTIN git-merge-file
BUILTIN git-merge-index
BUILTIN git-merge-ours
BUILTIN git-merge-recursive
BUILTIN git-merge-tree
BUILTIN git-mktag
BUILTIN git-mktree
BUILTIN git-mv
BUILTIN git-name-rev
BUILTIN git-notes
BUILTIN git-pack-objects
BUILTIN git-pack-redundant
BUILTIN git-pack-refs
BUILTIN git-patch-id
BUILTIN git-prune-packed
BUILTIN git-prune
BUILTIN git-push
BUILTIN git-read-tree
BUILTIN git-receive-pack
BUILTIN git-reflog
BUILTIN git-remote
BUILTIN git-remote-ext
BUILTIN git-remote-fd
BUILTIN git-repack
BUILTIN git-replace
BUILTIN git-rerere
BUILTIN git-reset
BUILTIN git-rev-list
BUILTIN git-rev-parse
BUILTIN git-revert
BUILTIN git-rm
BUILTIN git-send-pack
BUILTIN git-shortlog
BUILTIN git-show-branch
BUILTIN git-show-ref
BUILTIN git-stripspace
BUILTIN git-symbolic-ref
BUILTIN git-tag
BUILTIN git-unpack-file
BUILTIN git-unpack-objects
BUILTIN git-update-index
BUILTIN git-update-ref
BUILTIN git-update-server-info
BUILTIN git-upload-archive
BUILTIN git-var
BUILTIN git-verify-commit
BUILTIN git-verify-pack
BUILTIN git-verify-tag
BUILTIN git-write-tree
BUILTIN git-cherry
BUILTIN git-cherry-pick
BUILTIN git-format-patch
BUILTIN git-fsck-objects
BUILTIN git-init
BUILTIN git-merge-subtree
BUILTIN git-show
BUILTIN git-stage
BUILTIN git-status
BUILTIN git-whatchanged
make[2]: Entering directory '/«PKGBUILDDIR»/git-gui'
GITGUI_VERSION = 0.19.0.2.g3decb8e
* new locations or Tcl/Tk interpreter
MSGFMT po/de.msg MSGFMT po/hu.msg MSGFMT po/nb.msg MSGFMT po/sv.msg 474 translated, 39 untranslated.
520 translated.
MSGFMT po/fr.msg 514 translated.
MSGFMT po/it.msg MSGFMT po/ja.msg 521 translated.
MSGFMT po/pt_br.msg 520 translated.
519 translated, 1 untranslated.
MSGFMT po/bg.msg MSGFMT po/ru.msg 520 translated.
520 translated.
MSGFMT po/zh_cn.msg MSGFMT po/el.msg 366 translated, 7 fuzzy, 17 untranslated.
GEN git-gui
381 translated, 4 fuzzy, 6 untranslated.
INDEX lib/
516 translated, 4 untranslated.
543 translated.
make[2]: Leaving directory '/«PKGBUILDDIR»/git-gui'
make[2]: Entering directory '/«PKGBUILDDIR»/gitk-git'
Generating catalog po/de.msg
Generating catalog po/vi.msg
* new Tcl/Tk interpreter location
msgfmt --statistics --tcl po/de.po -l de -d po/
Generating catalog po/hu.msg
msgfmt --statistics --tcl po/vi.po -l vi -d po/
msgfmt --statistics --tcl po/hu.po -l hu -d po/
Generating catalog po/es.msg
msgfmt --statistics --tcl po/es.po -l es -d po/
200 translated messages, 7 untranslated messages.
289 translated messages.
288 translated messages.
Generating catalog po/sv.msg
304 translated messages.
msgfmt --statistics --tcl po/sv.po -l sv -d po/
Generating catalog po/fr.msg
msgfmt --statistics --tcl po/fr.po -l fr -d po/
Generating catalog po/it.msg
msgfmt --statistics --tcl po/it.po -l it -d po/
Generating catalog po/ja.msg
msgfmt --statistics --tcl po/ja.po -l ja -d po/
304 translated messages.
276 translated messages, 4 fuzzy translations.
Generating catalog po/pt_br.msg
283 translated messages, 6 untranslated messages.
284 translated messages.
msgfmt --statistics --tcl po/pt_br.po -l pt_br -d po/
Generating catalog po/bg.msg
msgfmt --statistics --tcl po/bg.po -l bg -d po/
Generating catalog po/ru.msg
msgfmt --statistics --tcl po/ru.po -l ru -d po/
GEN gitk-wish
290 translated messages.
245 translated messages.
302 translated messages.
make[2]: Leaving directory '/«PKGBUILDDIR»/gitk-git'
make[2]: Entering directory '/«PKGBUILDDIR»/perl'
make[3]: Entering directory '/«PKGBUILDDIR»/perl'
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git/SVN/Utils.pm >blib/lib/Git/SVN/Utils.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git/SVN/Memoize/YAML.pm >blib/lib/Git/SVN/Memoize/YAML.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git/SVN/Migration.pm >blib/lib/Git/SVN/Migration.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git/I18N.pm >blib/lib/Git/I18N.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <private-Error.pm >blib/lib/Error.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git/SVN.pm >blib/lib/Git/SVN.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git/SVN/Log.pm >blib/lib/Git/SVN/Log.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git/SVN/Editor.pm >blib/lib/Git/SVN/Editor.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git/SVN/Prompt.pm >blib/lib/Git/SVN/Prompt.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git/IndexInfo.pm >blib/lib/Git/IndexInfo.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git.pm >blib/lib/Git.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git/SVN/Fetcher.pm >blib/lib/Git/SVN/Fetcher.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git/SVN/Ra.pm >blib/lib/Git/SVN/Ra.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git/SVN/GlobSpec.pm >blib/lib/Git/SVN/GlobSpec.pm
Manifying blib/man3/Git.3pm
Manifying blib/man3/Git::I18N.3pm
Manifying blib/man3/Git::SVN::Editor.3pm
Manifying blib/man3/Git::SVN::Fetcher.3pm
Manifying blib/man3/Git::SVN::Memoize::YAML.3pm
Manifying blib/man3/Git::SVN::Prompt.3pm
Manifying blib/man3/Git::SVN::Ra.3pm
Manifying blib/man3/Git::SVN::Utils.3pm
Manifying blib/man3/private-Error.3pm
make[3]: Leaving directory '/«PKGBUILDDIR»/perl'
make[2]: Leaving directory '/«PKGBUILDDIR»/perl'
make[2]: Entering directory '/«PKGBUILDDIR»/templates'
make[2]: Leaving directory '/«PKGBUILDDIR»/templates'
make[1]: Leaving directory '/«PKGBUILDDIR»'
DESTDIR='/«PKGBUILDDIR»/debian/git' /usr/bin/make -C contrib/subtree all NO_OPENSSL=1 prefix=/usr gitexecdir=/usr/lib/git-core libexecdir=/usr/lib/git-core mandir=/usr/share/man htmldir=/usr/share/doc/git/html INSTALLDIRS=vendor USE_SRV_RR=1 USE_LIBPCRE=1 SANE_TOOL_PATH= INSTALL=install TAR=tar NO_CROSS_DIRECTORY_HARDLINKS=1 NO_INSTALL_HARDLINKS=1 DEFAULT_PAGER=pager DEFAULT_EDITOR=editor CC='gcc' CFLAGS='-Wall -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2' LDFLAGS='-Wl,-z,relro'
make[1]: Entering directory '/«PKGBUILDDIR»/contrib/subtree'
/usr/bin/make -C ../../ GIT-VERSION-FILE
make[2]: Entering directory '/«PKGBUILDDIR»'
make[2]: 'GIT-VERSION-FILE' is up to date.
make[2]: Leaving directory '/«PKGBUILDDIR»'
sed -e '1s|#!.*/sh|#!/bin/sh|' git-subtree.sh >git-subtree
chmod +x git-subtree
make[1]: Leaving directory '/«PKGBUILDDIR»/contrib/subtree'
ln -s contrib/subtree/git-subtree
test -z 'test' || \
DESTDIR='/«PKGBUILDDIR»/debian/git' /usr/bin/make test NO_OPENSSL=1 prefix=/usr gitexecdir=/usr/lib/git-core libexecdir=/usr/lib/git-core mandir=/usr/share/man htmldir=/usr/share/doc/git/html INSTALLDIRS=vendor USE_SRV_RR=1 USE_LIBPCRE=1 SANE_TOOL_PATH= INSTALL=install TAR=tar NO_CROSS_DIRECTORY_HARDLINKS=1 NO_INSTALL_HARDLINKS=1 DEFAULT_PAGER=pager DEFAULT_EDITOR=editor CC='gcc' CFLAGS='-Wall -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2' LDFLAGS='-Wl,-z,relro' || \
GIT_TEST_OPTS=--verbose DESTDIR='/«PKGBUILDDIR»/debian/git' /usr/bin/make test NO_OPENSSL=1 prefix=/usr gitexecdir=/usr/lib/git-core libexecdir=/usr/lib/git-core mandir=/usr/share/man htmldir=/usr/share/doc/git/html INSTALLDIRS=vendor USE_SRV_RR=1 USE_LIBPCRE=1 SANE_TOOL_PATH= INSTALL=install TAR=tar NO_CROSS_DIRECTORY_HARDLINKS=1 NO_INSTALL_HARDLINKS=1 DEFAULT_PAGER=pager DEFAULT_EDITOR=editor CC='gcc' CFLAGS='-Wall -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2' LDFLAGS='-Wl,-z,relro'
make[1]: Entering directory '/«PKGBUILDDIR»'
GEN perl/PM.stamp
make[2]: Entering directory '/«PKGBUILDDIR»/gitweb'
make[3]: Entering directory '/«PKGBUILDDIR»'
make[2]: Entering directory '/«PKGBUILDDIR»/perl'
/usr/bin/perl Makefile.PL PREFIX='/usr' INSTALL_BASE='' --localedir='/usr/share/locale'
make[3]: 'GIT-VERSION-FILE' is up to date.
make[3]: Leaving directory '/«PKGBUILDDIR»'
make[2]: Leaving directory '/«PKGBUILDDIR»/gitweb'
GEN git-instaweb
Generating a Unix-style perl.mak
Writing perl.mak for Git
Writing MYMETA.yml and MYMETA.json
make[2]: Leaving directory '/«PKGBUILDDIR»/perl'
GEN git-add--interactive
GEN git-difftool
GEN git-archimport
GEN git-cvsexportcommit
GEN git-cvsimport
GEN git-cvsserver
GEN git-relink
GEN git-send-email
GEN git-svn
make[2]: Entering directory '/«PKGBUILDDIR»/git-gui'
make[2]: Leaving directory '/«PKGBUILDDIR»/git-gui'
make[2]: Entering directory '/«PKGBUILDDIR»/gitk-git'
make[2]: Leaving directory '/«PKGBUILDDIR»/gitk-git'
make[2]: Entering directory '/«PKGBUILDDIR»/perl'
make[3]: Entering directory '/«PKGBUILDDIR»/perl'
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git/SVN.pm >blib/lib/Git/SVN.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git/SVN/GlobSpec.pm >blib/lib/Git/SVN/GlobSpec.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git/SVN/Utils.pm >blib/lib/Git/SVN/Utils.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git/SVN/Ra.pm >blib/lib/Git/SVN/Ra.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <private-Error.pm >blib/lib/Error.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git/SVN/Editor.pm >blib/lib/Git/SVN/Editor.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git/SVN/Memoize/YAML.pm >blib/lib/Git/SVN/Memoize/YAML.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git/I18N.pm >blib/lib/Git/I18N.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git/SVN/Migration.pm >blib/lib/Git/SVN/Migration.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git/SVN/Fetcher.pm >blib/lib/Git/SVN/Fetcher.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git/IndexInfo.pm >blib/lib/Git/IndexInfo.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git/SVN/Prompt.pm >blib/lib/Git/SVN/Prompt.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git.pm >blib/lib/Git.pm
/usr/bin/perl -pe "s<\Q++LOCALEDIR++\E></usr/share/locale>" <Git/SVN/Log.pm >blib/lib/Git/SVN/Log.pm
make[3]: Leaving directory '/«PKGBUILDDIR»/perl'
make[2]: Leaving directory '/«PKGBUILDDIR»/perl'
make[2]: Entering directory '/«PKGBUILDDIR»/templates'
make[2]: Leaving directory '/«PKGBUILDDIR»/templates'
/usr/bin/make -C t/ all
make[2]: Entering directory '/«PKGBUILDDIR»/t'
rm -f -r 'test-results'
/usr/bin/make aggregate-results-and-cleanup
make[3]: Entering directory '/«PKGBUILDDIR»/t'
*** t0000-basic.sh ***
*** t0001-init.sh ***
*** t0002-gitfile.sh ***
*** t0003-attributes.sh ***
ok 1 - initial setup
ok 1 - .git/objects should be empty after git init in an empty repo
ok 1 - setup
ok 2 - .git/objects should have 3 subdirectories
ok 3 - success is reported like this
ok 2 - bad setup: invalid .git file format
ok 3 - bad setup: invalid .git file path
ok 1 - plain
ok 4 - final setup + check rev-parse --git-dir
ok 5 - check hash-object
ok 6 - check cat-file
ok 2 - plain nested in bare
ok 2 - command line checks
ok 7 - check update-index
ok 8 - check write-tree
ok 3 - plain through aliased command, outside any git repo
ok 4 - pretend we have a fully passing test suite
ok 9 - check commit-tree
ok 10 - check rev-list
# passed all 10 test(s)
1..10
*** t0004-unwritable.sh ***
ok 4 - plain nested through aliased command
ok 5 - plain nested in bare through aliased command
ok 5 - pretend we have a partially passing test suite
ok 6 - plain with GIT_WORK_TREE
ok 3 - attribute test
ok 7 - plain bare
ok 1 - setup
ok 8 - plain bare with GIT_WORK_TREE
ok 2 - write-tree should notice unwritable repository
ok 3 - commit should notice unwritable repository
ok 9 - GIT_DIR bare
ok 4 - update-index should notice unwritable repository
ok 5 - add should notice unwritable repository
# passed all 5 test(s)
1..5
ok 10 - init --bare
ok 6 - pretend we have a known breakage
*** t0005-signals.sh ***
ok 11 - GIT_DIR non-bare
ok 12 - GIT_DIR & GIT_WORK_TREE (1)
ok 13 - GIT_DIR & GIT_WORK_TREE (2)
ok 1 - sigchain works
ok 4 - attribute matching is case sensitive when core.ignorecase=0
ok 7 - pretend we have fixed a known breakage
ok 2 - signals are propagated using shell convention
# passed all 2 test(s)
1..2
ok 14 - reinit
*** t0006-date.sh ***
ok 15 - init with --template
ok 16 - init with --template (blank)
ok 1 - relative date (5 seconds ago)
ok 17 - init with init.templatedir set
ok 2 - relative date (5 minutes ago)
ok 8 - pretend we have fixed one of two known breakages (run in sub test-lib)
ok 3 - relative date (5 hours ago)
ok 4 - relative date (5 days ago)
ok 5 - relative date (3 weeks ago)
ok 6 - relative date (5 months ago)
ok 7 - relative date (1 year, 2 months ago)
ok 8 - relative date (1 year, 9 months ago)
ok 9 - relative date (20 years ago)
ok 18 - init --bare/--shared overrides system/global config
ok 10 - relative date (12 months ago)
ok 11 - relative date (2 years ago)
ok 5 - attribute matching is case insensitive when core.ignorecase=1
ok 12 - parse date (2008)
ok 6 # skip additional case insensitivity tests (missing CASE_INSENSITIVE_FS)
ok 9 - pretend we have a pass, fail, and known breakage
ok 13 - parse date (2008-02)
ok 19 - init honors global core.sharedRepository
ok 14 - parse date (2008-02-14)
ok 20 - init rejects insanely long --template
ok 15 - parse date (2008-02-14 20:30:45)
ok 16 - parse date (2008-02-14 20:30:45 -0500)
ok 17 - parse date (2008-02-14 20:30:45 -0015)
ok 21 - init creates a new directory
ok 18 - parse date (2008-02-14 20:30:45 -5)
ok 19 - parse date (2008-02-14 20:30:45 -5:)
ok 7 - unnormalized paths
ok 22 - init creates a new bare directory
ok 20 - parse date (2008-02-14 20:30:45 -05)
ok 21 - parse date (2008-02-14 20:30:45 -:30)
ok 23 - init recreates a directory
ok 22 - parse date (2008-02-14 20:30:45 -05:00)
ok 23 - parse date (2008-02-14 20:30:45 TZ=EST5)
ok 24 - parse approxidate (now)
ok 10 - pretend we have a mix of all possible results
ok 24 - init recreates a new bare directory
ok 25 - parse approxidate (5 seconds ago)
ok 26 - parse approxidate (5.seconds.ago)
ok 25 - init creates a new deep directory
ok 27 - parse approxidate (10.minutes.ago)
ok 28 - parse approxidate (yesterday)
ok 29 - parse approxidate (3.days.ago)
ok 26 - init creates a new deep directory (umask vs. shared)
ok 30 - parse approxidate (3.weeks.ago)
ok 27 - init notices EEXIST (1)
ok 31 - parse approxidate (3.months.ago)
ok 32 - parse approxidate (2.years.3.months.ago)
ok 28 - init notices EEXIST (2)
ok 11 - test --verbose
ok 8 - relative paths
ok 33 - parse approxidate (6am yesterday)
ok 29 - init notices EPERM
ok 34 - parse approxidate (6pm yesterday)
ok 35 - parse approxidate (3:00)
ok 30 - init creates a new bare directory with global --bare
ok 9 - prefixes are not confused with leading directories
ok 36 - parse approxidate (15:00)
ok 37 - parse approxidate (noon today)
ok 38 - parse approxidate (noon yesterday)
ok 31 - init prefers command line to GIT_DIR
ok 39 - parse approxidate (last tuesday)
ok 40 - parse approxidate (July 5th)
ok 41 - parse approxidate (06/05/2009)
ok 32 - init with separate gitdir
ok 42 - parse approxidate (06.05.2009)
ok 33 - re-init on .git file
ok 43 - parse approxidate (Jun 6, 5AM)
ok 10 - core.attributesfile
ok 44 - parse approxidate (5AM Jun 6)
ok 12 - test --verbose-only
ok 34 - re-init to update git link
ok 45 - parse approxidate (6AM, June 7, 2009)
ok 11 - attribute test: read paths from stdin
# passed all 45 test(s)
1..45
*** t0007-git-var.sh ***
ok 35 - re-init to move gitdir
ok 12 - attribute test: --all option
ok 13 - GIT_SKIP_TESTS
ok 1 - get GIT_AUTHOR_IDENT
ok 36 - re-init to move gitdir symlink
ok 13 - attribute test: --cached option
# passed all 36 test(s)
1..36
ok 2 - get GIT_COMMITTER_IDENT
ok 14 - root subdir attribute test
ok 3 - requested identites are strict
ok 15 - negative patterns
ok 4 - git var -l lists variables
ok 16 - patterns starting with exclamation
ok 5 - git var -l lists config
ok 6 - listing and asking for variables are exclusive
# passed all 6 test(s)
1..6
*** t0008-ignores.sh ***
ok 17 - "**" test
ok 14 - GIT_SKIP_TESTS several tests
*** t0009-prio-queue.sh ***
ok 18 - "**" with no slashes test
ok 1 - basic ordering
ok 19 - using --git-dir and --work-tree
ok 2 - mixed put and get
ok 3 - notice empty queue
ok 20 - setup bare
# passed all 3 test(s)
1..3
*** t0010-racy-git.sh ***
ok 15 - GIT_SKIP_TESTS sh pattern
ok 1 - setup
ok 2 - . corner-case
ok 3 - . corner-case with -q
ok 21 - bare repository: check that .gitattribute is ignored
ok 4 - . corner-case with --quiet
ok 22 - bare repository: check that --cached honors index
ok 5 - . corner-case with -v
ok 1 - Racy GIT trial #0 part A
ok 6 - . corner-case with -v -n
ok 7 - . corner-case with -v --non-matching
ok 8 - . corner-case with --verbose
ok 9 - . corner-case with --verbose -n
ok 23 - bare repository: test info/attributes
ok 10 - . corner-case with --verbose --non-matching
# passed all 23 test(s)
1..23
ok 16 - --run basic
ok 11 - empty command line
*** t0011-hashmap.sh ***
ok 12 - empty command line with -q
ok 13 - empty command line with --quiet
ok 14 - empty command line with -v
ok 15 - empty command line with -v -n
ok 1 - hash functions
ok 16 - empty command line with -v --non-matching
ok 2 - put
ok 17 - empty command line with --verbose
ok 3 - put (case insensitive)
ok 17 - --run with a range
ok 4 - replace
ok 18 - empty command line with --verbose -n
ok 5 - replace (case insensitive)
ok 6 - get
ok 19 - empty command line with --verbose --non-matching
ok 7 - get (case insensitive)
ok 8 - add
ok 9 - add (case insensitive)
ok 20 - --stdin with empty STDIN
ok 10 - remove
ok 11 - remove (case insensitive)
ok 21 - --stdin with empty STDIN with -q
ok 12 - iterate
ok 13 - iterate (case insensitive)
ok 22 - --stdin with empty STDIN with --quiet
ok 23 - --stdin with empty STDIN with -v
ok 14 - grow / shrink
ok 24 - --stdin with empty STDIN with -v -n
ok 15 - string interning
# passed all 15 test(s)
1..15
ok 25 - --stdin with empty STDIN with -v --non-matching
*** t0020-crlf.sh ***
ok 18 - --run with two ranges
ok 26 - --stdin with empty STDIN with --verbose
ok 27 - --stdin with empty STDIN with --verbose -n
ok 28 - --stdin with empty STDIN with --verbose --non-matching
ok 29 - -q with multiple args
ok 30 - --quiet with multiple args
ok 2 - Racy GIT trial #0 part B
ok 31 - -q -v
ok 3 - Racy GIT trial #1 part A
ok 32 - --quiet -v
ok 33 - -q --verbose
ok 19 - --run with a left open range
ok 1 - setup
ok 34 - --quiet --verbose
ok 35 - --quiet with multiple args
ok 2 - safecrlf: autocrlf=input, all CRLF
ok 36 - erroneous use of --
ok 3 - safecrlf: autocrlf=input, mixed LF/CRLF
ok 37 - erroneous use of -- with -q
ok 4 - safecrlf: autocrlf=true, all LF
ok 38 - erroneous use of -- with --quiet
ok 5 - safecrlf: autocrlf=true mixed LF/CRLF
ok 39 - erroneous use of -- with -v
ok 20 - --run with a right open range
ok 40 - erroneous use of -- with -v -n
ok 41 - erroneous use of -- with -v --non-matching
ok 6 - safecrlf: print warning only once
ok 42 - erroneous use of -- with --verbose
ok 43 - erroneous use of -- with --verbose -n
ok 7 - safecrlf: git diff demotes safecrlf=true to warn
ok 44 - erroneous use of -- with --verbose --non-matching
ok 8 - switch off autocrlf, safecrlf, reset HEAD
ok 45 - --stdin with superfluous arg
ok 21 - --run with basic negation
ok 46 - --stdin with superfluous arg with -q
ok 47 - --stdin with superfluous arg with --quiet
ok 9 - update with autocrlf=input
ok 48 - --stdin with superfluous arg with -v
ok 49 - --stdin with superfluous arg with -v -n
ok 50 - --stdin with superfluous arg with -v --non-matching
ok 51 - --stdin with superfluous arg with --verbose
ok 10 - update with autocrlf=true
ok 52 - --stdin with superfluous arg with --verbose -n
ok 22 - --run with two negations
ok 53 - --stdin with superfluous arg with --verbose --non-matching
ok 54 - --stdin -z with superfluous arg
ok 11 - checkout with autocrlf=true
ok 4 - Racy GIT trial #1 part B
ok 55 - --stdin -z with superfluous arg with -q
ok 5 - Racy GIT trial #2 part A
ok 56 - --stdin -z with superfluous arg with --quiet
ok 57 - --stdin -z with superfluous arg with -v
ok 58 - --stdin -z with superfluous arg with -v -n
ok 12 - checkout with autocrlf=input
ok 59 - --stdin -z with superfluous arg with -v --non-matching
ok 23 - --run a range and negation
ok 60 - --stdin -z with superfluous arg with --verbose
ok 13 - apply patch (autocrlf=input)
ok 61 - --stdin -z with superfluous arg with --verbose -n
ok 62 - --stdin -z with superfluous arg with --verbose --non-matching
ok 14 - apply patch --cached (autocrlf=input)
ok 63 - -z without --stdin
ok 64 - -z without --stdin with -q
ok 65 - -z without --stdin with --quiet
ok 15 - apply patch --index (autocrlf=input)
ok 66 - -z without --stdin with -v
ok 24 - --run range negation
ok 16 - apply patch (autocrlf=true)
ok 67 - -z without --stdin with -v -n
ok 68 - -z without --stdin with -v --non-matching
ok 69 - -z without --stdin with --verbose
ok 17 - apply patch --cached (autocrlf=true)
ok 70 - -z without --stdin with --verbose -n
ok 71 - -z without --stdin with --verbose --non-matching
ok 18 - apply patch --index (autocrlf=true)
ok 72 - -z without --stdin and superfluous arg
ok 19 - .gitattributes says two is binary
ok 73 - -z without --stdin and superfluous arg with -q
ok 20 - .gitattributes says two is input
ok 74 - -z without --stdin and superfluous arg with --quiet
ok 25 - --run include, exclude and include
ok 75 - -z without --stdin and superfluous arg with -v
ok 21 - .gitattributes says two and three are text
ok 76 - -z without --stdin and superfluous arg with -v -n
ok 77 - -z without --stdin and superfluous arg with -v --non-matching
ok 22 - in-tree .gitattributes (1)
ok 78 - -z without --stdin and superfluous arg with --verbose
ok 79 - -z without --stdin and superfluous arg with --verbose -n
ok 23 - in-tree .gitattributes (2)
ok 6 - Racy GIT trial #2 part B
ok 80 - -z without --stdin and superfluous arg with --verbose --non-matching
ok 7 - Racy GIT trial #3 part A
ok 81 - needs work tree
ok 24 - in-tree .gitattributes (3)
ok 82 - needs work tree with -q
ok 25 - in-tree .gitattributes (4)
ok 83 - needs work tree with --quiet
ok 26 - --run include, exclude and include, comma separated
ok 84 - needs work tree with -v
ok 85 - needs work tree with -v -n
ok 86 - needs work tree with -v --non-matching
ok 87 - needs work tree with --verbose
ok 88 - needs work tree with --verbose -n
ok 89 - needs work tree with --verbose --non-matching
ok 26 - checkout with existing .gitattributes
ok 90 - non-existent file at top-level not ignored
ok 91 - non-existent file at top-level not ignored with -q
ok 92 - non-existent file at top-level not ignored with --quiet
ok 27 - --run exclude and include
ok 93 - non-existent file at top-level not ignored with -v
ok 27 - checkout when deleting .gitattributes
ok 28 - invalid .gitattributes (must not crash)
ok 94 - non-existent file at top-level not ignored with -v -n
ok 95 - non-existent file at top-level not ignored with -v --non-matching
ok 96 - non-existent file at top-level not ignored with --verbose
ok 97 - non-existent file at top-level not ignored with --verbose -n
ok 98 - non-existent file at top-level not ignored with --verbose --non-matching
ok 29 - setting up for new autocrlf tests
ok 30 - report no change after setting autocrlf
ok 99 - non-existent file at top-level not ignored with --no-index
ok 31 - files are clean after checkout
ok 32 - LF only file gets CRLF with autocrlf
ok 100 - non-existent file at top-level not ignored with --no-index -q
ok 33 - Mixed file is still mixed with autocrlf
ok 34 - CRLF only file has CRLF with autocrlf
ok 28 - --run empty selectors
ok 101 - non-existent file at top-level not ignored with --no-index --quiet
ok 102 - non-existent file at top-level not ignored with --no-index -v
ok 103 - non-existent file at top-level not ignored with --no-index -v -n
ok 35 - New CRLF file gets LF in repo
ok 104 - non-existent file at top-level not ignored with --no-index -v --non-matching
# passed all 35 test(s)
1..35
ok 105 - non-existent file at top-level not ignored with --no-index --verbose
ok 8 - Racy GIT trial #3 part B
ok 106 - non-existent file at top-level not ignored with --no-index --verbose -n
*** t0021-conversion.sh ***
ok 107 - non-existent file at top-level not ignored with --no-index --verbose --non-matching
ok 9 - Racy GIT trial #4 part A
ok 29 - --run invalid range start
ok 108 - non-existent file at top-level ignored
ok 109 - non-existent file at top-level ignored with -q
ok 110 - non-existent file at top-level ignored with --quiet
ok 111 - non-existent file at top-level ignored with -v
ok 30 - --run invalid range end
ok 112 - non-existent file at top-level ignored with -v -n
ok 1 - setup
ok 113 - non-existent file at top-level ignored with -v --non-matching
ok 114 - non-existent file at top-level ignored with --verbose
ok 2 - check
ok 115 - non-existent file at top-level ignored with --verbose -n
ok 116 - non-existent file at top-level ignored with --verbose --non-matching
ok 31 - --run invalid selector
ok 32 - test runs if prerequisite is satisfied
ok 33 # skip unmet prerequisite causes test to be skipped (missing DONTHAVEIT)
ok 34 - test runs if prerequisites are satisfied
ok 35 # skip unmet prerequisites causes test to be skipped (missing DONTHAVEIT of HAVEIT,DONTHAVEIT)
ok 36 # skip unmet prerequisites causes test to be skipped (missing DONTHAVEIT of DONTHAVEIT,HAVEIT)
ok 37 - test runs if lazy prereq is satisfied
ok 38 # skip missing lazy prereqs skip tests (missing !LAZY_TRUE)
ok 117 - non-existent file at top-level ignored with --no-index
ok 39 - negative lazy prereqs checked
ok 40 # skip missing negative lazy prereqs will skip (missing LAZY_FALSE)
ok 41 - tests clean up after themselves
ok 118 - non-existent file at top-level ignored with --no-index -q
ok 119 - non-existent file at top-level ignored with --no-index --quiet
ok 3 - expanded_in_repo
ok 120 - non-existent file at top-level ignored with --no-index -v
ok 121 - non-existent file at top-level ignored with --no-index -v -n
ok 122 - non-existent file at top-level ignored with --no-index -v --non-matching
ok 123 - non-existent file at top-level ignored with --no-index --verbose
ok 42 - tests clean up even on failures
ok 124 - non-existent file at top-level ignored with --no-index --verbose -n
ok 43 - git update-index without --add should fail adding
ok 44 - git update-index with --add should succeed
ok 125 - non-existent file at top-level ignored with --no-index --verbose --non-matching
ok 45 - writing tree out with git write-tree
ok 46 - validate object ID of a known tree
ok 47 - git update-index without --remove should fail removing
ok 48 - git update-index with --remove should be able to remove
ok 126 - existing untracked file at top-level not ignored
ok 4 - filter shell-escaped filenames
ok 49 - git write-tree should be able to write an empty tree
ok 50 - validate object ID of a known tree
ok 127 - existing untracked file at top-level not ignored with -q
ok 128 - existing untracked file at top-level not ignored with --quiet
ok 129 - existing untracked file at top-level not ignored with -v
ok 5 - required filter success
ok 130 - existing untracked file at top-level not ignored with -v -n
ok 131 - existing untracked file at top-level not ignored with -v --non-matching
ok 10 - Racy GIT trial #4 part B
ok 132 - existing untracked file at top-level not ignored with --verbose
# passed all 10 test(s)
1..10
ok 51 - adding various types of objects with git update-index --add
ok 133 - existing untracked file at top-level not ignored with --verbose -n
*** t0022-crlf-rename.sh ***
ok 6 - required filter smudge failure
ok 52 - showing stage with git ls-files --stage
ok 53 - validate git ls-files output for a known tree
ok 134 - existing untracked file at top-level not ignored with --verbose --non-matching
ok 54 - writing tree out with git write-tree
ok 55 - validate object ID for a known tree
ok 56 - showing tree with git ls-tree
ok 7 - required filter clean failure
ok 57 - git ls-tree output for a known tree
ok 135 - existing untracked file at top-level not ignored with --no-index
ok 8 # skip filter large file (missing EXPENSIVE)
# passed all 8 test(s)
1..8
ok 58 - showing tree with git ls-tree -r
ok 59 - git ls-tree -r output for a known tree
ok 136 - existing untracked file at top-level not ignored with --no-index -q
ok 60 - showing tree with git ls-tree -r -t
ok 61 - git ls-tree -r output for a known tree
*** t0023-crlf-am.sh ***
ok 137 - existing untracked file at top-level not ignored with --no-index --quiet
ok 62 - writing partial tree out with git write-tree --prefix
ok 63 - validate object ID for a known tree
ok 64 - writing partial tree out with git write-tree --prefix
ok 65 - validate object ID for a known tree
ok 138 - existing untracked file at top-level not ignored with --no-index -v
ok 66 - put invalid objects into the index
ok 139 - existing untracked file at top-level not ignored with --no-index -v -n
ok 67 - writing this tree without --missing-ok
ok 68 - writing this tree with --missing-ok
ok 140 - existing untracked file at top-level not ignored with --no-index -v --non-matching
ok 1 - setup
ok 141 - existing untracked file at top-level not ignored with --no-index --verbose
ok 69 - git read-tree followed by write-tree should be idempotent
ok 2 - diff -M
# passed all 2 test(s)
1..2
ok 70 - validate git diff-files output for a know cache/work tree state
ok 142 - existing untracked file at top-level not ignored with --no-index --verbose -n
ok 71 - git update-index --refresh should succeed
ok 143 - existing untracked file at top-level not ignored with --no-index --verbose --non-matching
*** t0024-crlf-archive.sh ***
ok 1 - setup
ok 72 - no diff after checkout and git update-index --refresh
ok 144 - existing tracked file at top-level not ignored
ok 73 - git commit-tree records the correct tree in a commit
ok 145 - existing tracked file at top-level not ignored with -q
ok 74 - git commit-tree records the correct parent in a commit
ok 146 - existing tracked file at top-level not ignored with --quiet
ok 147 - existing tracked file at top-level not ignored with -v
ok 75 - git commit-tree omits duplicated parent in a commit
ok 148 - existing tracked file at top-level not ignored with -v -n
ok 1 - setup
ok 149 - existing tracked file at top-level not ignored with -v --non-matching
ok 2 - tar archive
ok 76 - update-index D/F conflict
ok 150 - existing tracked file at top-level not ignored with --verbose
ok 151 - existing tracked file at top-level not ignored with --verbose -n
ok 3 - zip archive
ok 77 - very long name in the index handled sanely
ok 152 - existing tracked file at top-level not ignored with --verbose --non-matching
# passed all 3 test(s)
1..3
# passed all 77 test(s)
1..77
*** t0025-crlf-auto.sh ***
ok 153 - existing tracked file at top-level shown as ignored with --no-index
ok 154 - existing tracked file at top-level shown as ignored with --no-index -q
ok 155 - existing tracked file at top-level shown as ignored with --no-index --quiet
ok 2 - am
# passed all 2 test(s)
1..2
ok 156 - existing tracked file at top-level shown as ignored with --no-index -v
*** t0026-eol-config.sh ***
*** t0027-auto-crlf.sh ***
ok 157 - existing tracked file at top-level shown as ignored with --no-index -v -n
ok 158 - existing tracked file at top-level shown as ignored with --no-index -v --non-matching
ok 159 - existing tracked file at top-level shown as ignored with --no-index --verbose
ok 1 - setup
ok 160 - existing tracked file at top-level shown as ignored with --no-index --verbose -n
1..0 # SKIP EXPENSIVE not set
*** t0030-stripspace.sh ***
ok 161 - existing tracked file at top-level shown as ignored with --no-index --verbose --non-matching
ok 2 - default settings cause no changes
ok 1 - setup
ok 162 - existing untracked file at top-level ignored
ok 3 - crlf=true causes a CRLF file to be normalized
ok 163 - existing untracked file at top-level ignored with -q
ok 2 - eol=lf puts LFs in normalized file
ok 4 - text=true causes a CRLF file to be normalized
ok 164 - existing untracked file at top-level ignored with --quiet
ok 165 - existing untracked file at top-level ignored with -v
ok 5 - eol=crlf gives a normalized file CRLFs with autocrlf=false
ok 3 - eol=crlf puts CRLFs in normalized file
ok 1 - long lines without spaces should be unchanged
ok 166 - existing untracked file at top-level ignored with -v -n
ok 6 - eol=crlf gives a normalized file CRLFs with autocrlf=input
ok 167 - existing untracked file at top-level ignored with -v --non-matching
ok 2 - lines with spaces at the beginning should be unchanged
ok 168 - existing untracked file at top-level ignored with --verbose
ok 3 - lines with intermediate spaces should be unchanged
ok 4 - autocrlf=true overrides eol=lf
ok 7 - eol=lf gives a normalized file LFs with autocrlf=true
ok 169 - existing untracked file at top-level ignored with --verbose -n
ok 170 - existing untracked file at top-level ignored with --verbose --non-matching
ok 5 - autocrlf=true overrides unset eol
# passed all 5 test(s)
1..5
ok 171 - existing untracked file at top-level ignored with --no-index
ok 8 - autocrlf=true does not normalize CRLF files
ok 172 - existing untracked file at top-level ignored with --no-index -q
*** t0040-parse-options.sh ***
ok 173 - existing untracked file at top-level ignored with --no-index --quiet
ok 174 - existing untracked file at top-level ignored with --no-index -v
ok 9 - text=auto, autocrlf=true _does_ normalize CRLF files
ok 4 - consecutive blank lines should be unified
ok 175 - existing untracked file at top-level ignored with --no-index -v -n
ok 176 - existing untracked file at top-level ignored with --no-index -v --non-matching
ok 10 - text=auto, autocrlf=true does not normalize binary files
ok 1 - test help
ok 177 - existing untracked file at top-level ignored with --no-index --verbose
ok 2 - OPT_BOOL() #1
ok 11 - eol=crlf _does_ normalize binary files
# passed all 11 test(s)
1..11
ok 3 - OPT_BOOL() #2
ok 178 - existing untracked file at top-level ignored with --no-index --verbose -n
ok 4 - OPT_BOOL() #3
ok 5 - only consecutive blank lines should be completely removed
*** t0050-filesystem.sh ***
ok 179 - existing untracked file at top-level ignored with --no-index --verbose --non-matching
ok 5 - OPT_BOOL() #4
ok 6 - OPT_BOOL() #5
ok 7 - OPT_BOOL() is idempotent #1
ok 180 - mix of file types at top-level
ok 8 - OPT_BOOL() is idempotent #2
ok 181 - mix of file types at top-level with -v
ok 9 - OPT_BOOL() negation #1
ok 10 - OPT_BOOL() negation #2
ok 182 - mix of file types at top-level with -v -n
ok 11 - OPT_BOOL() no negation #1
ok 183 - mix of file types at top-level with -v --non-matching
ok 1 - detection of case insensitive filesystem during repo init
ok 12 - OPT_BOOL() no negation #2
ok 2 - detection of filesystem w/o symlink support during repo init
ok 6 - consecutive blank lines at the beginning should be removed
ok 184 - mix of file types at top-level with --verbose
ok 13 - OPT_BOOL() positivation
ok 14 - short options
ok 185 - mix of file types at top-level with --verbose -n
ok 15 - long options
ok 186 - mix of file types at top-level with --verbose --non-matching
ok 16 - missing required value
ok 17 - intermingled arguments
ok 187 - mix of file types at top-level with --no-index
ok 18 - unambiguously abbreviated option
ok 19 - unambiguously abbreviated option with "="
ok 20 - ambiguously abbreviated option
ok 188 - mix of file types at top-level with --no-index -v
ok 3 - setup case tests
ok 21 - non ambiguous option (after two options it abbreviates)
ok 7 - consecutive blank lines at the end should be removed
ok 189 - mix of file types at top-level with --no-index -v -n
ok 22 - detect possible typos
ok 4 - rename (case change)
ok 23 - detect possible typos
ok 190 - mix of file types at top-level with --no-index -v --non-matching
ok 24 - keep some options as arguments
ok 8 - text without newline at end should end with newline
ok 25 - OPT_DATE() works
ok 191 - mix of file types at top-level with --no-index --verbose
ok 26 - OPT_CALLBACK() and OPT_BIT() work
ok 5 - merge (case change)
ok 6 # skip add (with different case) (missing CASE_INSENSITIVE_FS)
ok 192 - mix of file types at top-level with --no-index --verbose -n
ok 27 - OPT_CALLBACK() and callback errors work
ok 9 - text plus spaces without newline at end should end with newline
ok 193 - mix of file types at top-level with --no-index --verbose --non-matching
ok 28 - OPT_BIT() and OPT_SET_INT() work
ok 29 - OPT_NEGBIT() and OPT_SET_INT() work
ok 30 - OPT_BIT() works
ok 194 - non-existent file in subdir a/ not ignored
ok 31 - OPT_NEGBIT() works
ok 10 - text plus spaces without newline at end should not show spaces
ok 195 - non-existent file in subdir a/ not ignored with -q
ok 32 - OPT_COUNTUP() with PARSE_OPT_NODASH works
ok 33 - OPT_NUMBER_CALLBACK() works
ok 196 - non-existent file in subdir a/ not ignored with --quiet
ok 34 - negation of OPT_NONEG flags is not ambiguous
ok 197 - non-existent file in subdir a/ not ignored with -v
ok 35 - --list keeps list of strings
ok 198 - non-existent file in subdir a/ not ignored with -v -n
ok 7 - setup unicode normalization tests
ok 36 - --no-list resets list
# passed all 36 test(s)
1..36
ok 199 - non-existent file in subdir a/ not ignored with -v --non-matching
ok 11 - text plus spaces without newline should show the correct lines
ok 8 - rename (silent unicode normalization)
*** t0055-beyond-symlinks.sh ***
ok 200 - non-existent file in subdir a/ not ignored with --verbose
ok 201 - non-existent file in subdir a/ not ignored with --verbose -n
ok 9 - merge (silent unicode normalization)
# passed all 9 test(s)
1..9
ok 202 - non-existent file in subdir a/ not ignored with --verbose --non-matching
ok 203 - non-existent file in subdir a/ not ignored with --no-index
ok 12 - text plus spaces at end should not show spaces
*** t0056-git-C.sh ***
ok 204 - non-existent file in subdir a/ not ignored with --no-index -q
ok 1 - setup
ok 205 - non-existent file in subdir a/ not ignored with --no-index --quiet
ok 2 - update-index --add beyond symlinks
ok 206 - non-existent file in subdir a/ not ignored with --no-index -v
ok 3 - add beyond symlinks
# passed all 3 test(s)
1..3
ok 207 - non-existent file in subdir a/ not ignored with --no-index -v -n
ok 13 - text plus spaces at end should be cleaned and newline must remain
*** t0060-path-utils.sh ***
ok 208 - non-existent file in subdir a/ not ignored with --no-index -v --non-matching
ok 209 - non-existent file in subdir a/ not ignored with --no-index --verbose
ok 210 - non-existent file in subdir a/ not ignored with --no-index --verbose -n
ok 14 - spaces with newline at end should be replaced with empty string
ok 211 - non-existent file in subdir a/ not ignored with --no-index --verbose --non-matching
ok 1 - "git -C <path>" runs git from the directory <path>
ok 15 - spaces without newline at end should not show spaces
ok 212 - non-existent file in subdir a/ ignored
ok 1 - normalize path: =>
ok 2 - normalize path: . =>
ok 213 - non-existent file in subdir a/ ignored with -q
ok 3 - normalize path: ./ =>
ok 16 - spaces without newline at end should be replaced with empty string
ok 214 - non-existent file in subdir a/ ignored with --quiet
ok 2 - Multiple -C options: "-C dir1 -C dir2" is equivalent to "-C dir1/dir2"
ok 4 - normalize path: ./. =>
ok 5 - normalize path: ./.. => ++failed++
ok 215 - non-existent file in subdir a/ ignored with -v
ok 6 - normalize path: ../. => ++failed++
ok 216 - non-existent file in subdir a/ ignored with -v -n
ok 7 - normalize path: ./../.// => ++failed++
ok 8 - normalize path: dir/.. =>
ok 217 - non-existent file in subdir a/ ignored with -v --non-matching
ok 17 - consecutive text lines should be unchanged
ok 9 - normalize path: dir/sub/../.. =>
ok 218 - non-existent file in subdir a/ ignored with --verbose
ok 3 - Effect on --git-dir option: "-C c --git-dir=a.git" is equivalent to "--git-dir c/a.git"
ok 10 - normalize path: dir/sub/../../.. => ++failed++
ok 18 - strip comments, too
ok 11 - normalize path: dir => dir
ok 219 - non-existent file in subdir a/ ignored with --verbose -n
ok 4 - Order should not matter: "--git-dir=a.git -C c" is equivalent to "-C c --git-dir=a.git"
ok 19 - strip comments with changed comment char
ok 12 - normalize path: dir// => dir/
ok 20 - -c with single line
ok 220 - non-existent file in subdir a/ ignored with --verbose --non-matching
ok 13 - normalize path: ./dir => dir
ok 21 - -c with single line followed by empty line
ok 5 - Effect on --work-tree option: "-C c/a.git --work-tree=../a" is equivalent to "--work-tree=c/a --git-dir=c/a.git"
ok 14 - normalize path: dir/. => dir/
ok 22 - -c with newline only
ok 15 - normalize path: dir///./ => dir/
ok 23 - --comment-lines with single line
ok 221 - non-existent file in subdir a/ ignored with --no-index
ok 16 - normalize path: dir//sub/.. => dir/
ok 6 - Order should not matter: "--work-tree=../a -C c/a.git" is equivalent to "-C c/a.git --work-tree=../a"
ok 24 - -c with changed comment char
# passed all 24 test(s)
1..24
ok 17 - normalize path: dir/sub/../ => dir/
ok 222 - non-existent file in subdir a/ ignored with --no-index -q
ok 18 - normalize path: dir/sub/../. => dir/
*** t0061-run-command.sh ***
ok 7 - Effect on --git-dir and --work-tree options - "-C c --git-dir=a.git --work-tree=a" is equivalent to "--git-dir=c/a.git --work-tree=c/a"
ok 223 - non-existent file in subdir a/ ignored with --no-index --quiet
ok 19 - normalize path: dir/s1/../s2/ => dir/s2/
ok 20 - normalize path: d1/s1///s2/..//../s3/ => d1/s3/
ok 224 - non-existent file in subdir a/ ignored with --no-index -v
ok 8 - Order should not matter: "-C c --git-dir=a.git --work-tree=a" is equivalent to "--git-dir=a.git -C c --work-tree=a"
ok 21 - normalize path: d1/s1//../s2/../../d2 => d2
ok 225 - non-existent file in subdir a/ ignored with --no-index -v -n
ok 22 - normalize path: d1/.../d2 => d1/.../d2
ok 23 - normalize path: d1/..././../d2 => d1/d2
ok 9 - Order should not matter: "-C c --git-dir=a.git --work-tree=a" is equivalent to "--git-dir=a.git --work-tree=a -C c"
ok 1 - start_command reports ENOENT
ok 24 - normalize path: / => /
ok 10 - Relative followed by fullpath: "-C ./here -C /there" is equivalent to "-C /there"
ok 226 - non-existent file in subdir a/ ignored with --no-index -v --non-matching
# passed all 10 test(s)
1..10
ok 25 - normalize path: // => /
ok 227 - non-existent file in subdir a/ ignored with --no-index --verbose
ok 26 - normalize path: /// => /
ok 2 - run_command can run a command
ok 27 - normalize path: /. => /
ok 228 - non-existent file in subdir a/ ignored with --no-index --verbose -n
*** t0062-revision-walking.sh ***
ok 28 - normalize path: /./ => /
ok 3 - run_command reports EACCES
ok 229 - non-existent file in subdir a/ ignored with --no-index --verbose --non-matching
ok 29 - normalize path: /./.. => ++failed++
ok 230 - existing untracked file in subdir a/ not ignored
ok 30 - normalize path: /../. => ++failed++
ok 31 - normalize path: /./../.// => ++failed++
ok 231 - existing untracked file in subdir a/ not ignored with -q
ok 4 - unreadable directory in PATH
# passed all 4 test(s)
1..4
ok 32 - normalize path: /dir/.. => /
ok 232 - existing untracked file in subdir a/ not ignored with --quiet
ok 33 - normalize path: /dir/sub/../.. => /
*** t0063-string-list.sh ***
ok 34 - normalize path: /dir/sub/../../.. => ++failed++
ok 233 - existing untracked file in subdir a/ not ignored with -v
ok 35 - normalize path: /dir => /dir
ok 234 - existing untracked file in subdir a/ not ignored with -v -n
ok 36 - normalize path: /dir// => /dir/
ok 1 - setup
ok 235 - existing untracked file in subdir a/ not ignored with -v --non-matching
ok 37 - normalize path: /./dir => /dir
ok 2 - revision walking can be done twice
# passed all 2 test(s)
1..2
ok 38 - normalize path: /dir/. => /dir/
ok 236 - existing untracked file in subdir a/ not ignored with --verbose
ok 39 - normalize path: /dir///./ => /dir/
*** t0070-fundamental.sh ***
ok 237 - existing untracked file in subdir a/ not ignored with --verbose -n
ok 40 - normalize path: /dir//sub/.. => /dir/
ok 1 - split foo:bar:baz at :, max -1
ok 41 - normalize path: /dir/sub/../ => /dir/
ok 238 - existing untracked file in subdir a/ not ignored with --verbose --non-matching
ok 42 - normalize path: //dir/sub/../. => /dir/
ok 2 - split foo:bar:baz at :, max 0
ok 43 - normalize path: /dir/s1/../s2/ => /dir/s2/
ok 239 - existing untracked file in subdir a/ not ignored with --no-index
ok 44 - normalize path: /d1/s1///s2/..//../s3/ => /d1/s3/
ok 3 - split foo:bar:baz at :, max 1
ok 45 - normalize path: /d1/s1//../s2/../../d2 => /d2
ok 240 - existing untracked file in subdir a/ not ignored with --no-index -q
ok 1 - character classes (isspace, isalpha etc.)
ok 4 - split foo:bar:baz at :, max 2
ok 2 - mktemp to nonexistent directory prints filename
ok 46 - normalize path: /d1/.../d2 => /d1/.../d2
ok 241 - existing untracked file in subdir a/ not ignored with --no-index --quiet
ok 47 - normalize path: /d1/..././../d2 => /d1/d2
ok 242 - existing untracked file in subdir a/ not ignored with --no-index -v
ok 5 - split foo:bar: at :, max -1
ok 48 - longest ancestor: / / => -1
ok 3 - mktemp to unwritable directory prints filename
ok 49 - longest ancestor: /foo / => 0
ok 50 - longest ancestor: /foo /fo => -1
ok 243 - existing untracked file in subdir a/ not ignored with --no-index -v -n
ok 51 - longest ancestor: /foo /foo => -1
ok 4 - git_mkstemps_mode does not fail if fd 0 is not open
ok 6 - split at :, max -1
ok 5 - check for a bug in the regex routines
ok 52 - longest ancestor: /foo /bar => -1
ok 244 - existing untracked file in subdir a/ not ignored with --no-index -v --non-matching
# passed all 5 test(s)
1..5
ok 53 - longest ancestor: /foo /foo/bar => -1
ok 54 - longest ancestor: /foo /foo:/bar => -1
ok 7 - split : at :, max -1
ok 245 - existing untracked file in subdir a/ not ignored with --no-index --verbose
ok 55 - longest ancestor: /foo /:/foo:/bar => 0
*** t0081-line-buffer.sh ***
ok 56 - longest ancestor: /foo /foo:/:/bar => 0
ok 57 - longest ancestor: /foo /:/bar:/foo => 0
ok 246 - existing untracked file in subdir a/ not ignored with --no-index --verbose -n
ok 58 - longest ancestor: /foo/bar / => 0
ok 59 - longest ancestor: /foo/bar /fo => -1
ok 247 - existing untracked file in subdir a/ not ignored with --no-index --verbose --non-matching
ok 60 - longest ancestor: /foo/bar /foo => 4
ok 61 - longest ancestor: /foo/bar /foo/ba => -1
ok 62 - longest ancestor: /foo/bar /:/fo => 0
ok 8 - test filter_string_list
ok 63 - longest ancestor: /foo/bar /foo:/foo/ba => 4
ok 248 - existing tracked file in subdir a/ not ignored
ok 64 - longest ancestor: /foo/bar /bar => -1
ok 65 - longest ancestor: /foo/bar /fo => -1
ok 66 - longest ancestor: /foo/bar /foo:/bar => 4
ok 1 - hello world
ok 249 - existing tracked file in subdir a/ not ignored with -q
ok 67 - longest ancestor: /foo/bar /:/foo:/bar => 4
ok 2 - 0-length read, send along greeting
ok 68 - longest ancestor: /foo/bar /foo:/:/bar => 4
ok 250 - existing tracked file in subdir a/ not ignored with --quiet
ok 69 - longest ancestor: /foo/bar /:/bar:/fo => 0
ok 70 - longest ancestor: /foo/bar /:/bar => 0
ok 3 - read from file descriptor
ok 71 - longest ancestor: /foo/bar /foo => 4
ok 251 - existing tracked file in subdir a/ not ignored with -v
ok 72 - longest ancestor: /foo/bar /foo:/bar => 4
ok 252 - existing tracked file in subdir a/ not ignored with -v -n
ok 73 - longest ancestor: /foo/bar /bar => -1
ok 4 - skip, copy null byte
ok 9 - test remove_duplicates
ok 74 - strip_path_suffix
# passed all 9 test(s)
1..9
ok 253 - existing tracked file in subdir a/ not ignored with -v --non-matching
ok 75 - absolute path rejects the empty string
ok 76 - real path rejects the empty string
*** t0090-cache-tree.sh ***
ok 5 - read null byte
ok 254 - existing tracked file in subdir a/ not ignored with --verbose
ok 77 - real path works on absolute paths 1
ok 6 - long reads are truncated
ok 255 - existing tracked file in subdir a/ not ignored with --verbose -n
ok 7 - long copies are truncated
ok 78 - real path works on absolute paths 2
ok 8 - long binary reads are truncated
ok 256 - existing tracked file in subdir a/ not ignored with --verbose --non-matching
# passed all 8 test(s)
1..8
*** t0100-previous.sh ***
ok 79 - real path removes extra leading slashes
ok 257 - existing tracked file in subdir a/ shown as ignored with --no-index
ok 80 - real path removes other extra slashes
ok 258 - existing tracked file in subdir a/ shown as ignored with --no-index -q
ok 259 - existing tracked file in subdir a/ shown as ignored with --no-index --quiet
ok 260 - existing tracked file in subdir a/ shown as ignored with --no-index -v
ok 81 - real path works on symlinks
not ok 1 - initial commit has cache-tree # TODO known breakage
ok 82 - prefix_path works with absolute paths to work tree symlinks
ok 261 - existing tracked file in subdir a/ shown as ignored with --no-index -v -n
ok 83 - prefix_path works with only absolute path to work tree
ok 2 - read-tree HEAD establishes cache-tree
ok 84 - prefix_path rejects absolute path to dir with same beginning as work tree
ok 262 - existing tracked file in subdir a/ shown as ignored with --no-index -v --non-matching
ok 263 - existing tracked file in subdir a/ shown as ignored with --no-index --verbose
ok 85 - prefix_path works with absolute path to a symlink to work tree having same beginning as work tree
ok 86 - relative path: /foo/a/b/c/ /foo/a/b/ => c/
ok 264 - existing tracked file in subdir a/ shown as ignored with --no-index --verbose -n
ok 87 - relative path: /foo/a/b/c/ /foo/a/b => c/
ok 88 - relative path: /foo/a//b//c/ ///foo/a/b// => c/
ok 1 - branch -d @{-1}
ok 3 - git-add invalidates cache-tree
ok 265 - existing tracked file in subdir a/ shown as ignored with --no-index --verbose --non-matching
ok 89 - relative path: /foo/a/b /foo/a/b => ./
ok 90 - relative path: /foo/a/b/ /foo/a/b => ./
ok 91 - relative path: /foo/a /foo/a/b => ../
ok 266 - existing untracked file in subdir a/ ignored
ok 92 - relative path: / /foo/a/b/ => ../../../
ok 4 - update-index invalidates cache-tree
ok 267 - existing untracked file in subdir a/ ignored with -q
ok 2 - branch -d @{-12} when there is not enough switches yet
ok 93 - relative path: /foo/a/c /foo/a/b/ => ../c
ok 94 - relative path: /foo/a/c /foo/a/b => ../c
ok 268 - existing untracked file in subdir a/ ignored with --quiet
ok 95 - relative path: /foo/x/y /foo/a/b/ => ../../x/y
ok 269 - existing untracked file in subdir a/ ignored with -v
ok 5 - write-tree establishes cache-tree
ok 96 - relative path: /foo/a/b <empty> => /foo/a/b
ok 97 - relative path: /foo/a/b <null> => /foo/a/b
ok 270 - existing untracked file in subdir a/ ignored with -v -n
ok 98 - relative path: foo/a/b/c/ foo/a/b/ => c/
ok 6 - test-scrap-cache-tree works
ok 99 - relative path: foo/a/b/c/ foo/a/b => c/
ok 271 - existing untracked file in subdir a/ ignored with -v --non-matching
ok 100 - relative path: foo/a/b//c foo/a//b => c
ok 272 - existing untracked file in subdir a/ ignored with --verbose
ok 101 - relative path: foo/a/b/ foo/a/b/ => ./
ok 102 - relative path: foo/a/b/ foo/a/b => ./
ok 273 - existing untracked file in subdir a/ ignored with --verbose -n
ok 103 - relative path: foo/a foo/a/b => ../
ok 7 - second commit has cache-tree
ok 274 - existing untracked file in subdir a/ ignored with --verbose --non-matching
ok 104 - relative path: foo/x/y foo/a/b => ../../x/y
ok 105 - relative path: foo/a/c foo/a/b => ../c
ok 106 - relative path: foo/a/b /foo/x/y => foo/a/b
ok 275 - existing untracked file in subdir a/ ignored with --no-index
ok 8 - reset --hard gives cache-tree
ok 107 - relative path: /foo/a/b foo/x/y => /foo/a/b
ok 108 # skip relative path: d:/a/b D:/a/c => ../b (missing MINGW)
ok 109 # skip relative path: C:/a/b D:/a/c => C:/a/b (missing MINGW)
ok 276 - existing untracked file in subdir a/ ignored with --no-index -q
ok 110 - relative path: foo/a/b <empty> => foo/a/b
ok 277 - existing untracked file in subdir a/ ignored with --no-index --quiet
ok 111 - relative path: foo/a/b <null> => foo/a/b
ok 9 - reset --hard without index gives cache-tree
ok 112 - relative path: <empty> /foo/a/b => ./
ok 278 - existing untracked file in subdir a/ ignored with --no-index -v
ok 113 - relative path: <empty> <empty> => ./
ok 3 - merge @{-1}
ok 114 - relative path: <empty> <null> => ./
ok 279 - existing untracked file in subdir a/ ignored with --no-index -v -n
not ok 10 - checkout gives cache-tree # TODO known breakage
ok 115 - relative path: <null> <empty> => ./
# still have 2 known breakage(s)
# passed all remaining 8 test(s)
1..10
ok 280 - existing untracked file in subdir a/ ignored with --no-index -v --non-matching
ok 116 - relative path: <null> <null> => ./
ok 117 - relative path: <null> /foo/a/b => ./
*** t0101-at-syntax.sh ***
# passed all 117 test(s)
ok 281 - existing untracked file in subdir a/ ignored with --no-index --verbose
1..117
ok 282 - existing untracked file in subdir a/ ignored with --no-index --verbose -n
*** t0110-urlmatch-normalization.sh ***
ok 283 - existing untracked file in subdir a/ ignored with --no-index --verbose --non-matching
ok 4 - merge @{-1}~1
ok 284 - mix of file types in subdir a/
ok 285 - mix of file types in subdir a/ with -v
ok 286 - mix of file types in subdir a/ with -v -n
ok 5 - merge @{-100} before checking out that many branches yet
ok 287 - mix of file types in subdir a/ with -v --non-matching
# passed all 5 test(s)
1..5
ok 288 - mix of file types in subdir a/ with --verbose
ok 1 - setup
*** t0200-gettext-basic.sh ***
ok 2 - @{0} shows current
ok 289 - mix of file types in subdir a/ with --verbose -n
ok 3 - @{1} shows old
ok 290 - mix of file types in subdir a/ with --verbose --non-matching
ok 1 - url scheme
ok 4 - @{now} shows current
ok 5 - @{2001-09-17} (before the first commit) shows old
ok 291 - mix of file types in subdir a/ with --no-index
ok 6 - silly approxidates work
ok 7 - notice misspelled upstream
ok 8 - complain about total nonsense
ok 292 - mix of file types in subdir a/ with --no-index -v
# passed all 8 test(s)
1..8
ok 293 - mix of file types in subdir a/ with --no-index -v -n
*** t0201-gettext-fallbacks.sh ***
ok 294 - mix of file types in subdir a/ with --no-index -v --non-matching
# lib-gettext: No is_IS UTF-8 locale available
# lib-gettext: No is_IS ISO-8859-1 locale available
ok 1 - sanity: $GIT_INTERNAL_GETTEXT_SH_SCHEME is set (to gnu)
ok 2 - sanity: $TEXTDOMAIN is git
ok 3 - xgettext sanity: Perl _() strings are not extracted
ok 4 - xgettext sanity: Comment extraction with --add-comments
ok 295 - mix of file types in subdir a/ with --no-index --verbose
ok 5 - xgettext sanity: Comment extraction with --add-comments stops at statements
ok 6 - sanity: $TEXTDOMAINDIR exists without NO_GETTEXT=YesPlease
ok 7 - sanity: Icelandic locale was compiled
ok 8 # skip sanity: gettext("") metadata is OK (missing GETTEXT_LOCALE)
ok 9 # skip sanity: gettext(unknown) is passed through (missing GETTEXT_LOCALE)
ok 10 # skip xgettext: C extraction of _() and N_() strings (missing GETTEXT_LOCALE)
ok 11 # skip xgettext: C extraction with %s (missing GETTEXT_LOCALE)
ok 12 # skip xgettext: Shell extraction (missing GETTEXT_LOCALE)
ok 13 # skip xgettext: Shell extraction with $variable (missing GETTEXT_LOCALE)
ok 14 # skip xgettext: Perl extraction (missing GETTEXT_LOCALE)
ok 15 # skip xgettext: Perl extraction with %s (missing GETTEXT_LOCALE)
ok 16 # skip sanity: Some gettext("") data for real locale (missing GETTEXT_LOCALE)
ok 296 - mix of file types in subdir a/ with --no-index --verbose -n
# passed all 16 test(s)
1..16
ok 297 - mix of file types in subdir a/ with --no-index --verbose --non-matching
*** t0202-gettext-perl.sh ***
# lib-gettext: No is_IS UTF-8 locale available
# lib-gettext: No is_IS ISO-8859-1 locale available
ok 1 - sanity: $GIT_INTERNAL_GETTEXT_SH_SCHEME is set (to fallthrough)
ok 2 - sanity: $GIT_INTERNAL_GETTEXT_TEST_FALLBACKS is set
ok 3 - sanity: $GIT_INTERNAL_GETTEXT_SH_SCHEME" is fallthrough
ok 4 - gettext: our gettext() fallback has pass-through semantics
ok 298 - sub-directory local ignore
ok 299 - sub-directory local ignore with --verbose
ok 2 - url authority
ok 300 - local ignore inside a sub-directory
ok 5 - eval_gettext: our eval_gettext() fallback has pass-through semantics
# lib-gettext: No is_IS UTF-8 locale available
# lib-gettext: No is_IS ISO-8859-1 locale available
ok 301 - local ignore inside a sub-directory with --verbose
ok 6 - eval_gettext: our eval_gettext() fallback can interpolate variables
ok 302 - nested include
ok 7 - eval_gettext: our eval_gettext() fallback can interpolate variables with spaces
ok 303 - nested include with -q
ok 304 - nested include with --quiet
ok 8 - eval_gettext: our eval_gettext() fallback can interpolate variables with spaces and quotes
# passed all 8 test(s)
1..8
ok 305 - nested include with -v
*** t0203-gettext-setlocale-sanity.sh ***
ok 306 - nested include with -v -n
ok 3 - url port checks
ok 307 - nested include with -v --non-matching
ok 308 - nested include with --verbose
# run 0: Perl Git::I18N API (perl /«PKGBUILDDIR»/t/t0202/test.pl)
ok 309 - nested include with --verbose -n
# lib-gettext: No is_IS UTF-8 locale available
# lib-gettext: No is_IS ISO-8859-1 locale available
ok 310 - nested include with --verbose --non-matching
ok 4 - url port normalization
ok 1 - git show a ISO-8859-1 commit under C locale
ok 2 # skip git show a ISO-8859-1 commit under a UTF-8 locale (missing GETTEXT_LOCALE)
# passed all 2 test(s)
1..2
ok 311 - ignored sub-directory
ok 5 - url general escapes
*** t0204-gettext-reencode-sanity.sh ***
ok 312 - ignored sub-directory with -q
ok 313 - ignored sub-directory with --quiet
ok 314 - ignored sub-directory with -v
ok 315 - ignored sub-directory with -v -n
# lib-gettext: No is_IS UTF-8 locale available
# lib-gettext: No is_IS ISO-8859-1 locale available
ok 1 # skip gettext: Emitting UTF-8 from our UTF-8 *.mo files / Icelandic (missing GETTEXT_LOCALE)
ok 2 # skip gettext: Emitting UTF-8 from our UTF-8 *.mo files / Runes (missing GETTEXT_LOCALE)
ok 3 # skip gettext: Emitting ISO-8859-1 from our UTF-8 *.mo files / Icelandic (missing GETTEXT_ISO_LOCALE)
ok 4 # skip gettext: impossible ISO-8859-1 output (missing GETTEXT_ISO_LOCALE)
ok 5 # skip gettext: Fetching a UTF-8 msgid -> UTF-8 (missing GETTEXT_LOCALE)
ok 6 # skip gettext: Fetching a UTF-8 msgid -> ISO-8859-1 (missing GETTEXT_ISO_LOCALE)
ok 7 # skip gettext.c: git init UTF-8 -> UTF-8 (missing GETTEXT_LOCALE)
ok 8 # skip gettext.c: git init UTF-8 -> ISO-8859-1 (missing GETTEXT_ISO_LOCALE)
# passed all 8 test(s)
1..8
ok 316 - ignored sub-directory with -v --non-matching
ok 6 - url high-bit escapes
ok 7 - url utf-8 escapes
*** t0205-gettext-poison.sh ***
ok 8 - url username/password escapes
ok 317 - ignored sub-directory with --verbose
1..8
ok 9 - url normalized lengths
ok 318 - ignored sub-directory with --verbose -n
ok 1 - Testing Git::I18N with NO Perl gettext library
ok 2 - Git::I18N is located at /«PKGBUILDDIR»/t/../perl/blib/lib/Git/I18N.pm
ok 3 - sanity: Git::I18N has 1 export(s)
ok 4 - sanity: Git::I18N exports everything by default
ok 5 - sanity: __ has a $ prototype
ok 6 - Passing a string through __() in the C locale works
ok 7 # skip GETTEXT_LOCALE must be set by lib-gettext.sh for exhaustive Git::I18N tests
ok 8 # skip GETTEXT_LOCALE must be set by lib-gettext.sh for exhaustive Git::I18N tests
# test_external test Perl Git::I18N API was ok
# test_external_without_stderr test no stderr: Perl Git::I18N API was ok
ok 319 - ignored sub-directory with --verbose --non-matching
*** t0300-credentials.sh ***
ok 320 - multiple files inside ignored sub-directory
# lib-gettext: No is_IS UTF-8 locale available
# lib-gettext: No is_IS ISO-8859-1 locale available
ok 1 # skip sanity: $GIT_INTERNAL_GETTEXT_SH_SCHEME is set (to gnu) (missing GETTEXT_POISON)
ok 2 # skip sanity: $GIT_INTERNAL_GETTEXT_SH_SCHEME" is poison (missing GETTEXT_POISON)
ok 3 # skip gettext: our gettext() fallback has poison semantics (missing GETTEXT_POISON)
ok 4 # skip eval_gettext: our eval_gettext() fallback has poison semantics (missing GETTEXT_POISON)
# passed all 4 test(s)
1..4
ok 321 - multiple files inside ignored sub-directory with -v
*** t0301-credential-cache.sh ***
ok 322 - cd to ignored sub-directory
ok 10 - url . and .. segments
ok 323 - cd to ignored sub-directory with -v
ok 1 - setup helper scripts
ok 324 - symlink
ok 11 - url equivalents
# passed all 11 test(s)
1..11
ok 2 - credential_fill invokes helper
ok 325 - symlink with -q
*** t0302-credential-store.sh ***
ok 326 - symlink with --quiet
ok 1 - helper (cache) has no existing data
ok 327 - symlink with -v
ok 3 - credential_fill invokes multiple helpers
ok 328 - symlink with -v -n
ok 2 - helper (cache) stores password
ok 329 - symlink with -v --non-matching
ok 4 - credential_fill stops when we get a full response
ok 3 - helper (cache) can retrieve password
ok 330 - symlink with --verbose
ok 331 - symlink with --verbose -n
ok 332 - symlink with --verbose --non-matching
ok 1 - helper (store) has no existing data
ok 5 - credential_fill continues through partial response
ok 4 - helper (cache) requires matching protocol
ok 2 - helper (store) stores password
ok 333 - beyond a symlink
ok 6 - credential_fill passes along metadata
ok 334 - beyond a symlink with -q
ok 5 - helper (cache) requires matching host
ok 3 - helper (store) can retrieve password
ok 335 - beyond a symlink with --quiet
ok 6 - helper (cache) requires matching username
ok 7 - credential_approve calls all helpers
ok 336 - beyond a symlink with -v
ok 4 - helper (store) requires matching protocol
ok 8 - do not bother storing password-less credential
ok 337 - beyond a symlink with -v -n
ok 338 - beyond a symlink with -v --non-matching
ok 5 - helper (store) requires matching host
ok 339 - beyond a symlink with --verbose
ok 9 - credential_reject calls all helpers
ok 7 - helper (cache) requires matching path
ok 340 - beyond a symlink with --verbose -n
ok 6 - helper (store) requires matching username
ok 341 - beyond a symlink with --verbose --non-matching
ok 10 - usernames can be preserved
ok 342 - beyond a symlink from subdirectory
ok 11 - usernames can be overridden
ok 8 - helper (cache) can forget host
ok 12 - do not bother completing already-full credential
ok 343 - beyond a symlink from subdirectory with -q
ok 344 - beyond a symlink from subdirectory with --quiet
ok 7 - helper (store) requires matching path
ok 13 - empty helper list falls back to internal getpass
ok 345 - beyond a symlink from subdirectory with -v
ok 14 - internal getpass does not ask for known username
ok 346 - beyond a symlink from subdirectory with -v -n
ok 347 - beyond a symlink from subdirectory with -v --non-matching
ok 15 - respect configured credentials
ok 8 - helper (store) can forget host
ok 348 - beyond a symlink from subdirectory with --verbose
ok 9 - helper (cache) can store multiple users
ok 349 - beyond a symlink from subdirectory with --verbose -n
ok 16 - match configured credential
ok 350 - beyond a symlink from subdirectory with --verbose --non-matching
ok 10 - helper (cache) can forget user
ok 351 - submodule
ok 17 - do not match configured credential
ok 11 - helper (cache) remembers other user
ok 9 - helper (store) can store multiple users
ok 352 - submodule with -q
ok 353 - submodule with --quiet
ok 18 - pull username from config
ok 354 - submodule with -v
ok 355 - submodule with -v -n
ok 10 - helper (store) can forget user
ok 356 - submodule with -v --non-matching
ok 11 - helper (store) remembers other user
ok 357 - submodule with --verbose
# passed all 11 test(s)
1..11
ok 19 - http paths can be part of context
# passed all 19 test(s)
1..19
ok 358 - submodule with --verbose -n
*** t0303-credential-external.sh ***
*** t1000-read-tree-m-3way.sh ***
ok 359 - submodule with --verbose --non-matching
ok 360 - submodule from subdirectory
1..0 # SKIP used to test external credential helpers
ok 361 - submodule from subdirectory with -q
ok 1 - adding test file NN and Z/NN
*** t1001-read-tree-m-2way.sh ***
ok 2 - adding test file ND and Z/ND
ok 362 - submodule from subdirectory with --quiet
ok 363 - submodule from subdirectory with -v
ok 3 - adding test file NM and Z/NM
ok 4 - adding test file DN and Z/DN
ok 364 - submodule from subdirectory with -v -n
ok 365 - submodule from subdirectory with -v --non-matching
ok 5 - adding test file DD and Z/DD
ok 366 - submodule from subdirectory with --verbose
ok 6 - adding test file DM and Z/DM
ok 367 - submodule from subdirectory with --verbose -n
ok 7 - adding test file MN and Z/MN
ok 368 - submodule from subdirectory with --verbose --non-matching
ok 8 - adding test file MD and Z/MD
ok 1 - setup
ok 369 - global ignore not yet enabled
ok 9 - adding test file MM and Z/MM
ok 10 - adding test file SS
ok 370 - global ignore
ok 11 - adding test file TT
ok 2 - 1, 2, 3 - no carry forward
ok 12 - prepare initial tree
ok 13 - change in branch A (removal)
ok 371 - global ignore with -v
ok 14 - change in branch A (modification)
ok 15 - change in branch A (modification)
ok 16 - change in branch A (modification)
ok 17 - change in branch A (modification)
ok 18 - change in branch A (modification)
ok 372 - --stdin
ok 19 - change in branch A (modification)
ok 373 - --stdin -q
ok 20 - change in branch A (addition)
ok 3 - 4 - carry forward local addition.
ok 21 - change in branch A (addition)
ok 374 - --stdin -v
ok 22 - change in branch A (addition)
ok 23 - change in branch A (addition)
ok 375 - --stdin -z
ok 24 - change in branch A (addition)
ok 376 - --stdin -z -q
ok 25 - change in branch A (edit)
ok 377 - --stdin -z -v
ok 26 - change in branch A (change file to directory)
ok 378 - -z --stdin
ok 27 - recording branch A tree
ok 4 - 5 - carry forward local addition.
ok 379 - -z --stdin -q
ok 380 - -z --stdin -v
ok 28 - reading original tree and checking out
ok 29 - change in branch B (removal)
ok 30 - change in branch B (modification)
ok 31 - change in branch B (modification)
ok 32 - change in branch B (modification)
ok 33 - change in branch B (modification)
ok 381 - --stdin from subdirectory
ok 5 - 6 - local addition already has the same.
ok 34 - change in branch B (modification)
ok 35 - change in branch B (modification)
ok 382 - --stdin from subdirectory with -v
ok 36 - change in branch B (addition)
ok 37 - change in branch B (addition)
ok 383 - --stdin from subdirectory with -v -n
ok 38 - change in branch B (addition)
ok 39 - change in branch B (addition)
ok 384 - --stdin -z from subdirectory
ok 40 - change in branch B (addition and modification)
ok 385 - --stdin -z from subdirectory with -v
ok 6 - 7 - local addition already has the same.
ok 41 - change in branch B (modification)
ok 386 - -z --stdin from subdirectory
ok 42 - change in branch B (addition of a file to conflict with directory)
ok 43 - recording branch B tree
ok 387 - -z --stdin from subdirectory with -v
ok 7 - 8 - conflicting addition.
ok 388 - streaming support for --stdin
ok 389 - trailing whitespace is ignored
ok 8 - 9 - conflicting addition.
ok 44 - keep contents of 3 trees for easy access
ok 390 - quoting allows trailing whitespace
ok 391 - correct handling of backslashes
# passed all 391 test(s)
1..391
ok 12 - helper (cache --timeout=1) times out
ok 45 - 3-way merge with git read-tree -m, empty cache
# passed all 12 test(s)
1..12
*** t1002-read-tree-m-u-2way.sh ***
ok 9 - 10 - path removed.
*** t1003-read-tree-prefix.sh ***
ok 10 - 11 - dirty path removed.
ok 46 - 3-way merge with git read-tree -m, match H
ok 1 - setup
ok 2 - read-tree --prefix
# passed all 2 test(s)
1..2
ok 11 - 12 - unmatching local changes being removed.
ok 47 - 1 - must not have an entry not in A.
*** t1004-read-tree-m-u-wf.sh ***
ok 1 - setup
ok 12 - 13 - unmatching local changes being removed.
ok 48 - 2 - must match B in !O && !A && B case.
ok 49 - 2 - matching B alone is OK in !O && !A && B case.
ok 1 - two-way setup
ok 13 - 14 - unchanged in two heads.
ok 2 - 1, 2, 3 - no carry forward
ok 50 - 3 - must match A in !O && A && !B case.
ok 2 - two-way not clobbering
ok 3 - two-way with incorrect --exclude-per-directory (1)
ok 51 - 3 - matching A alone is OK in !O && A && !B case.
ok 4 - two-way with incorrect --exclude-per-directory (2)
ok 14 - 15 - unchanged in two heads.
ok 52 - 3 (fail) - must match A in !O && A && !B case.
ok 5 - two-way clobbering a ignored file
ok 15 - 16 - conflicting local change.
ok 53 - 4 - must match and be up-to-date in !O && A && B && A!=B case.
ok 3 - 4 - carry forward local addition.
ok 16 - 17 - conflicting local change.
ok 54 - 4 (fail) - must match and be up-to-date in !O && A && B && A!=B case.
ok 6 - three-way not complaining on an untracked path in both
ok 55 - 4 (fail) - must match and be up-to-date in !O && A && B && A!=B case.
ok 7 - three-way not clobbering a working tree file
ok 17 - 18 - local change already having a good result.
ok 56 - 5 - must match in !O && A && B && A==B case.
ok 8 - three-way not complaining on an untracked file
ok 4 - 5 - carry forward local addition.
ok 18 - 19 - local change already having a good result, further modified.
ok 57 - 5 - must match in !O && A && B && A==B case.
ok 58 - 5 (fail) - must match A in !O && A && B && A==B case.
ok 9 - 3-way not overwriting local changes (setup)
ok 19 - 20 - no local change, use new tree.
ok 59 - 6 - must not exist in O && !A && !B case
ok 5 - 6 - local addition already has the same.
ok 10 - 3-way not overwriting local changes (our side)
ok 20 - 21 - no local change, dirty cache.
ok 60 - 7 - must not exist in O && !A && B && O!=B case
ok 61 - 8 - must not exist in O && !A && B && O==B case
ok 11 - 3-way not overwriting local changes (their side)
ok 21 - 22 - local change cache updated.
ok 6 - 7 - local addition already has the same.
ok 62 - 9 - must match and be up-to-date in O && A && !B && O!=A case
ok 22 - DF vs DF/DF case setup.
ok 63 - 9 (fail) - must match and be up-to-date in O && A && !B && O!=A case
ok 23 - DF vs DF/DF case test.
ok 7 - 8 - conflicting addition.
ok 64 - 9 (fail) - must match and be up-to-date in O && A && !B && O!=A case
ok 12 - funny symlink in work tree
ok 24 - a/b (untracked) vs a case setup.
ok 65 - 10 - must match and be up-to-date in O && A && !B && O==A case
ok 8 - 9 - conflicting addition.
ok 13 - funny symlink in work tree, un-unlink-able
ok 25 - a/b (untracked) vs a, plus c/d case test.
ok 66 - 10 (fail) - must match and be up-to-date in O && A && !B && O==A case
ok 14 - D/F setup
ok 67 - 10 (fail) - must match and be up-to-date in O && A && !B && O==A case
ok 26 - a/b vs a, plus c/d case setup.
ok 9 - 10 - path removed.
ok 68 - 11 - must match and be up-to-date in O && A && B && O!=A && O!=B && A!=B case
ok 15 - D/F
ok 27 - a/b vs a, plus c/d case test.
ok 10 - 11 - dirty path removed.
ok 69 - 11 (fail) - must match and be up-to-date in O && A && B && O!=A && O!=B && A!=B case
ok 16 - D/F resolve
ok 70 - 11 (fail) - must match and be up-to-date in O && A && B && O!=A && O!=B && A!=B case
ok 17 - D/F recursive
ok 11 - 12 - unmatching local changes being removed.
# passed all 17 test(s)
1..17
ok 28 - -m references the correct modified tree
# passed all 28 test(s)
1..28
*** t1005-read-tree-reset.sh ***
*** t1006-cat-file.sh ***
ok 71 - 12 - must match A in O && A && B && O!=A && A==B case
ok 12 - 13 - unmatching local changes being removed.
ok 72 - 12 - must match A in O && A && B && O!=A && A==B case
ok 1 - setup
ok 2 - blob exists
ok 3 - Type of blob is correct
ok 4 - Size of blob is correct
ok 73 - 12 (fail) - must match A in O && A && B && O!=A && A==B case
ok 5 - Content of blob is correct
ok 6 - Pretty content of blob is correct
ok 1 - setup
ok 7 - --batch output of blob is correct
ok 8 - --batch-check output of blob is correct
ok 9 - custom --batch-check format
ok 74 - 13 - must match A in O && A && B && O!=A && O==B case
ok 10 - --batch-check with %(rest)
ok 13 - 14 - unchanged in two heads.
ok 11 - --batch without type (blob)
ok 2 - reset should work
ok 12 - --batch without size (blob)
ok 75 - 13 - must match A in O && A && B && O!=A && O==B case
ok 13 - --batch-check without %(rest) considers whole line
ok 14 - tree exists
ok 15 - Type of tree is correct
ok 16 - Size of tree is correct
ok 17 - Pretty content of tree is correct
ok 18 - --batch-check output of tree is correct
ok 76 - 14 - must match and be up-to-date in O && A && B && O==A && O!=B case
ok 19 - custom --batch-check format
ok 20 - --batch-check with %(rest)
ok 21 - commit exists
ok 3 - reset should remove remnants from a failed merge
ok 22 - Type of commit is correct
ok 14 - 15 - unchanged in two heads.
ok 23 - Size of commit is correct
ok 77 - 14 - may match B in O && A && B && O==A && O!=B case
ok 24 - Content of commit is correct
ok 25 - Pretty content of commit is correct
ok 78 - 14 (fail) - must match and be up-to-date in O && A && B && O==A && O!=B case
ok 26 - --batch output of commit is correct
ok 27 - --batch-check output of commit is correct
ok 28 - custom --batch-check format
ok 79 - 14 (fail) - must match and be up-to-date in O && A && B && O==A && O!=B case
ok 29 - --batch-check with %(rest)
ok 15 - 16 - conflicting local change.
ok 4 - two-way reset should remove remnants too
ok 30 - --batch without type (commit)
ok 31 - --batch without size (commit)
ok 80 - 15 - must match A in O && A && B && O==A && O==B case
ok 32 - tag exists
ok 33 - Type of tag is correct
ok 34 - Size of tag is correct
ok 16 - 17 - conflicting local change.
ok 5 - Porcelain reset should remove remnants too
ok 35 - Content of tag is correct
ok 81 - 15 - must match A in O && A && B && O==A && O==B case
ok 36 - Pretty content of tag is correct
ok 37 - --batch output of tag is correct
ok 38 - --batch-check output of tag is correct
ok 82 - 15 (fail) - must match A in O && A && B && O==A && O==B case
ok 39 - custom --batch-check format
ok 40 - --batch-check with %(rest)
ok 6 - Porcelain checkout -f should remove remnants too
ok 41 - --batch without type (tag)
ok 17 - 18 - local change already having a good result.
ok 42 - --batch without size (tag)
ok 83 - 16 - A matches in one and B matches in another.
ok 43 - Reach a blob from a tag pointing to it
# passed all 83 test(s)
1..83
ok 44 - Passing -t with --batch fails
ok 45 - Passing --batch with -t fails
ok 46 - Passing -s with --batch fails
ok 47 - Passing --batch with -s fails
ok 48 - Passing -e with --batch fails
ok 49 - Passing --batch with -e fails
ok 50 - Passing -p with --batch fails
ok 7 - Porcelain checkout -f HEAD should remove remnants too
ok 51 - Passing --batch with -p fails
*** t1007-hash-object.sh ***
# passed all 7 test(s)
1..7
ok 52 - Passing <type> with --batch fails
ok 53 - Passing --batch with <type> fails
ok 54 - Passing sha1 with --batch fails
*** t1008-read-tree-overlay.sh ***
ok 55 - Passing -t with --batch-check fails
ok 56 - Passing --batch-check with -t fails
ok 57 - Passing -s with --batch-check fails
ok 58 - Passing --batch-check with -s fails
ok 1 - multiple '--stdin's are rejected
ok 59 - Passing -e with --batch-check fails
ok 18 - 19 - local change already having a good result, further modified.
ok 60 - Passing --batch-check with -e fails
ok 61 - Passing -p with --batch-check fails
ok 2 - Can't use --stdin and --stdin-paths together
ok 3 - Can't pass filenames as arguments with --stdin-paths
ok 62 - Passing --batch-check with -p fails
ok 63 - Passing <type> with --batch-check fails
ok 4 - Can't use --path with --stdin-paths
ok 5 - Can't use --path with --no-filters
ok 64 - Passing --batch-check with <type> fails
ok 65 - Passing sha1 with --batch-check fails
ok 66 - --batch-check for a non-existent named object
ok 67 - --batch-check for a non-existent hash
ok 6 - hash a file
ok 7 - blob does not exist in database
ok 68 - --batch for an existent and a non-existent hash
ok 8 - hash from stdin
ok 69 - --batch-check for an emtpy line
ok 9 - blob does not exist in database
ok 70 - empty --batch-check notices missing object
ok 10 - hash a file and write to database
ok 11 - blob exists in database
ok 1 - setup
ok 71 - --batch with multiple sha1s gives correct format
ok 72 - --batch-check with multiple sha1s gives correct format
ok 12 - git hash-object --stdin file1 <file0 first operates on file0, then file1
ok 19 - 20 - no local change, use new tree.
ok 73 - setup blobs which are likely to delta
ok 2 - multi-read
# passed all 2 test(s)
1..2
ok 74 - confirm that neither loose blob is a delta
*** t1009-read-tree-new-index.sh ***
ok 13 - check that appropriate filter is invoke when --path is used
ok 20 - 21 - no local change, dirty cache.
ok 14 - check that --no-filters option works
ok 1 - setup
ok 2 - non-existent index file
ok 3 - empty index file
ok 15 - check that --no-filters option works with --stdin-paths
# passed all 3 test(s)
1..3
ok 21 - DF vs DF/DF case setup.
*** t1010-mktree.sh ***
ok 75 - %(deltabase) reports packed delta bases
# passed all 75 test(s)
1..75
ok 16 - hash from stdin and write to database (-w --stdin)
ok 17 - blob exists in database
*** t1011-read-tree-sparse-checkout.sh ***
ok 18 - hash from stdin and write to database (--stdin -w)
ok 19 - blob exists in database
ok 22 - DF vs DF/DF case test.
# passed all 22 test(s)
1..22
ok 20 - hash two files with names on stdin
*** t1012-read-tree-df.sh ***
ok 21 - hash two files with names on stdin and write to database (-w --stdin-paths)
ok 22 - blob exists in database
ok 23 - blob exists in database
ok 24 - hash two files with names on stdin and write to database (--stdin-paths -w)
ok 25 - blob exists in database
ok 26 - blob exists in database
ok 27 - corrupt tree
ok 28 - corrupt commit
ok 29 - corrupt tag
# passed all 29 test(s)
1..29
*** t1013-read-tree-submodule.sh ***
ok 1 - setup
ok 1 - setup
ok 2 - ls-tree piped to mktree (1)
ok 3 - ls-tree piped to mktree (2)
ok 4 - ls-tree output in wrong order given to mktree (1)
ok 5 - ls-tree output in wrong order given to mktree (2)
ok 6 - allow missing object with --missing
ok 7 - mktree refuses to read ls-tree -r output (1)
ok 8 - mktree refuses to read ls-tree -r output (2)
# passed all 8 test(s)
1..8
ok 2 - read-tree without .git/info/sparse-checkout
*** t1014-read-tree-confusing.sh ***
ok 3 - read-tree with .git/info/sparse-checkout but disabled
ok 1 - create base tree
ok 2 - enable core.protectHFS for rejection tests
ok 3 - enable core.protectNTFS for rejection tests
ok 4 - reject . at end of path
ok 4 - read-tree --no-sparse-checkout with empty .git/info/sparse-checkout and enabled
ok 5 - reject . as subtree
ok 6 - reject .. at end of path
ok 7 - reject .. as subtree
ok 8 - reject .git at end of path
ok 9 - reject .git as subtree
ok 5 - read-tree with empty .git/info/sparse-checkout
ok 10 - reject .GIT at end of path
ok 11 - reject .GIT as subtree
ok 12 - reject {u200c}.Git at end of path
ok 13 - reject {u200c}.Git as subtree
ok 6 - match directories with trailing slash
ok 14 - reject .gI{u200c}T at end of path
ok 15 - reject .gI{u200c}T as subtree
ok 16 - reject .GiT{u200c} at end of path
ok 7 - match directories without trailing slash
ok 17 - reject .GiT{u200c} as subtree
ok 18 - reject git~1 at end of path
ok 8 - match directories with negated patterns
ok 19 - reject git~1 as subtree
ok 20 - reject .git.{space} at end of path
ok 9 - match directories with negated patterns (2)
ok 21 - reject .git.{space} as subtree
ok 22 - reject backslashes at end of path
ok 23 - reject backslashes as subtree
ok 24 - reject backslashes2 at end of path
ok 25 - reject backslashes2 as subtree
ok 10 - match directory pattern
ok 1 - setup
ok 26 - utf-8 paths allowed with core.protectHFS off
# passed all 26 test(s)
1..26
*** t1020-subdirectory.sh ***
ok 11 - checkout area changes
ok 2 - 3-way (1)
ok 1 - setup
ok 12 - read-tree updates worktree, absent case
ok 2 - update-index and ls-files
ok 3 - cat-file
ok 13 - read-tree updates worktree, dirty case
ok 3 - 3-way (2)
ok 4 - diff-files
ok 5 - write-tree
ok 6 - checkout-index
ok 14 - read-tree removes worktree, dirty case
ok 4 - 3-way (3)
ok 15 - read-tree adds to worktree, absent case
ok 7 - read-tree
ok 16 - read-tree adds to worktree, dirty case
ok 8 - alias expansion
ok 5 - 2-way (1)
ok 9 - !alias expansion
# passed all 5 test(s)
1..5
ok 17 - index removal and worktree narrowing at the same time
ok 10 - GIT_PREFIX for !alias
*** t1021-rerere-in-workdir.sh ***
ok 11 - GIT_PREFIX for built-ins
ok 18 - read-tree --reset removes outside worktree
ok 12 - no file/rev ambiguity check inside .git
ok 19 - print errors when failed to update worktree
ok 13 - no file/rev ambiguity check inside a bare repo
ok 20 - checkout without --ignore-skip-worktree-bits
ok 14 - detection should not be fooled by a symlink
# passed all 14 test(s)
1..14
ok 21 - checkout with --ignore-skip-worktree-bits
# passed all 21 test(s)
1..21
ok 1 - setup
*** t1050-large.sh ***
*** t1051-large-conversion.sh ***
ok 1 - setup
ok 1 - setup input tests
ok 2 - rerere in workdir
ok 2 - autocrlf=true converts on input
ok 3 - eol=crlf converts on input
not ok 3 - rerere in workdir (relative) # TODO known breakage
# still have 1 known breakage(s)
# passed all remaining 2 test(s)
1..3
ok 4 - ident converts on input
*** t1060-object-corruption.sh ***
ok 5 - user-defined filters convert on input
ok 6 - setup output tests
ok 7 - autocrlf=true converts on output
ok 8 - eol=crlf converts on output
ok 9 - user-defined filters convert on output
ok 1 - setup corrupt repo
ok 10 - ident converts on output
# passed all 10 test(s)
1..10
*** t1100-commit-tree-options.sh ***
ok 2 - setup repo with missing object
ok 1 - git read-tree -u -m: added submodule creates empty directory
ok 1 - test preparation: write empty tree
ok 2 - construct commit
ok 3 - read commit
ok 4 - compare commit
ok 3 - setup repo with misnamed object
ok 4 - streaming a corrupt blob fails
ok 5 - read-tree -u detects bit-errors in blobs
ok 5 - flags and then non flags
ok 6 - read-tree -u detects missing objects
# passed all 5 test(s)
1..5
ok 2 - add a large file or two
*** t1200-tutorial.sh ***
ok 7 - clone --no-local --bare detects corruption
ok 3 - checkout a large file
ok 8 - clone --no-local --bare detects missing object
ok 1 - blob
ok 2 - blob 557db03
ok 3 - git diff-files -p
ok 9 - clone --no-local --bare detects misnamed object
ok 4 - git diff
ok 5 - tree
ok 10 - clone --local detects corruption
ok 11 - error detected during checkout leaves repo intact
ok 6 - git diff-index -p HEAD
ok 7 - git diff HEAD
ok 12 - clone --local detects missing objects
ok 8 - git whatchanged -p --root
not ok 13 - clone --local detects misnamed objects # TODO known breakage
ok 9 - git tag my-first-tag
# still have 1 known breakage(s)
# passed all remaining 12 test(s)
1..13
ok 10 - git checkout -b mybranch
ok 11 - git branch
*** t1300-repo-config.sh ***
ok 12 - git resolve now fails
ok 1 - clear default config
ok 2 - initial
ok 13 - git show-branch
ok 3 - mixed case
ok 4 - similar section
ok 5 - uppercase section
ok 14 - git resolve
ok 15 - git resolve output
ok 6 - replace with non-match
ok 7 - replace with non-match (actually matching)
ok 16 - git show-branch (part 2)
ok 8 - non-match result
ok 9 - find mixed-case key by canonical name
ok 17 - git show-branch (part 3)
ok 10 - find mixed-case key by non-canonical name
ok 2 - git read-tree -u -m: added submodule leaves existing empty directory alone
ok 11 - subsections are not canonicalized by git-config
ok 4 - packsize limit
ok 12 - unset with cont. lines
ok 13 - unset with cont. lines is correct
ok 18 - rewind to "Some fun." and "Some work."
ok 14 - multiple unset
ok 15 - multiple unset is correct
ok 19 - git show-branch (part 4)
ok 16 - --replace-all missing value
ok 17 - --replace-all
ok 18 - all replaced
ok 20 - manual merge
ok 19 - really mean test
ok 20 - really really mean test
ok 21 - git ls-files --stage
ok 21 - get value
ok 22 - git ls-files --unmerged
ok 22 - unset
ok 23 - multivar
ok 24 - non-match
ok 25 - non-match value
ok 26 - multi-valued get returns final one
ok 27 - multi-valued get-all returns all
ok 23 - git-merge-index
ok 24 - git ls-files --stage (part 2)
ok 28 - multivar replace
ok 29 - ambiguous unset
ok 3 - git read-tree -u -m: added submodule doesn't remove untracked unignored file with same name
ok 30 - invalid unset
ok 31 - multivar unset
ok 32 - invalid key
ok 33 - correct key
ok 34 - hierarchical section
ok 35 - hierarchical section value
ok 36 - working --list
ok 37 - --list without repo produces empty output
ok 38 - --get-regexp
ok 39 - --add
ok 40 - get variable with no value
ok 41 - get variable with empty value
ok 25 - git repack
ok 42 - get-regexp variable with no value
ok 43 - get-regexp --bool variable with no value
ok 26 - git prune-packed
ok 44 - get-regexp variable with empty value
ok 45 - get bool variable with no value
ok 27 - -> only packed objects
# passed all 27 test(s)
1..27
ok 46 - get bool variable with empty value
ok 47 - no arguments, but no crash
*** t1301-shared-repo.sh ***
ok 48 - new section is partial match of another
ok 49 - new variable inserts into proper section
ok 50 - alternative --file (non-existing file should fail)
ok 51 - alternative GIT_CONFIG
ok 52 - alternative GIT_CONFIG (--file)
ok 1 - shared = 0400 (faulty permission u-w)
ok 53 - alternative GIT_CONFIG (--file=-)
ok 5 - diff --raw
ok 54 - setting a value in stdin is an error
ok 55 - editing stdin is an error
ok 2 - shared=1 does not clear bits preset by umask 002
ok 56 - refer config from subdirectory
ok 57 - refer config from subdirectory via --file
ok 58 - --set in alternative file
ok 59 - rename section
ok 3 - shared=1 does not clear bits preset by umask 022
ok 60 - rename succeeded
ok 61 - rename non-existing section
ok 62 - rename succeeded
ok 63 - rename another section
ok 64 - rename succeeded
ok 4 - shared=all
ok 6 - hash-object
ok 65 - rename a section with a var on the same line
ok 66 - rename succeeded
ok 7 - cat-file a large file
ok 67 - renaming empty section name is rejected
ok 68 - renaming to bogus section is rejected
ok 69 - remove section
ok 5 - update-server-info honors core.sharedRepository
ok 70 - section was removed properly
ok 8 - cat-file a large file from a tag
ok 71 - section ending
ok 6 - shared = 0660 (r--r-----) ro
ok 7 - shared = 0660 (rw-rw----) rw
ok 72 - numbers
ok 9 - git-show a large file
ok 73 - --int is at least 64 bits
ok 8 - shared = 0640 (r--r-----) ro
ok 9 - shared = 0640 (rw-r-----) rw
ok 74 - invalid unit
ok 10 - shared = 0600 (r--------) ro
ok 11 - shared = 0600 (rw-------) rw
ok 4 - git read-tree -u -m: replace tracked file with submodule creates empty directory
ok 12 - shared = 0666 (r--r--r--) ro
ok 13 - shared = 0666 (rw-rw-rw-) rw
ok 75 - bool
ok 76 - invalid bool (--get)
ok 77 - invalid bool (set)
ok 14 - shared = 0664 (r--r--r--) ro
ok 15 - shared = 0664 (rw-rw-r--) rw
ok 78 - set --bool
ok 16 - git reflog expire honors core.sharedRepository
ok 79 - set --int
ok 80 - get --bool-or-int
ok 81 - set --bool-or-int
ok 17 - forced modes
# passed all 17 test(s)
1..17
ok 82 - set --path
ok 83 - get --path
*** t1302-repo-version.sh ***
ok 84 - get --path copes with unset $HOME
ok 85 - get --path barfs on boolean variable
ok 10 - index-pack
ok 86 - quoting
ok 87 - key with newline
ok 88 - value with newline
ok 89 - value continued on next line
ok 1 - setup
ok 90 - --null --list
ok 91 - --null --get-regexp
ok 2 - gitdir selection on normal repos
ok 3 - gitdir selection on unsupported repo
ok 92 - inner whitespace kept verbatim
ok 4 - gitdir not required mode
ok 5 - gitdir required mode
# passed all 5 test(s)
1..5
ok 93 - symlinked configuration
ok 94 - nonexistent configuration
*** t1303-wacky-config.sh ***
ok 95 - symlink to nonexistent configuration
ok 11 - repack
ok 96 - check split_cmdline return
ok 1 - modify same key
ok 5 - git read-tree -u -m: replace directory with submodule
ok 97 - git -c "key=value" support
ok 98 - git -c can represent empty string
ok 2 - add key in same section
ok 3 - add key in different section
ok 4 - make sure git config escapes section names properly
ok 99 - key sanity-checking
ok 5 - do not crash on special long config line
ok 100 - git -c works with aliases of builtins
ok 101 - git -c does not split values on equals
ok 102 - git -c dies on bogus config
ok 103 - git -c complains about empty key
ok 104 - git -c complains about empty key and value
ok 6 - get many entries
ok 105 - git config --edit works
ok 7 - get many entries by regex
ok 106 - git config --edit respects core.editor
ok 107 - barf on syntax error
ok 108 - barf on incomplete section header
ok 109 - barf on incomplete string
ok 110 - urlmatch
not ok 111 - unsetting the last key in a section removes header # TODO known breakage
not ok 112 - adding a key into an empty section reuses header # TODO known breakage
ok 8 - add and replace one of many entries
ok 113 - preserves existing permissions
# still have 2 known breakage(s)
# passed all remaining 111 test(s)
1..113
*** t1304-default-acl.sh ***
ok 9 - replace many entries
ok 1 - checking for a working acl setup
ok 2 # skip Setup test repo (missing SETFACL)
ok 3 # skip Objects creation does not break ACLs with restrictive umask (missing SETFACL)
ok 4 # skip git gc does not break ACLs with restrictive umask (missing SETFACL)
ok 10 - unset many entries
# passed all 4 test(s)
1..4
*** t1305-config-include.sh ***
ok 11 - --add appends new value after existing empty value
# passed all 11 test(s)
1..11
ok 12 - pack-objects with large loose object
*** t1306-xdg-files.sh ***
ok 1 - include file by absolute path
ok 2 - include file by relative path
ok 3 - chained relative paths
ok 4 - include paths get tilde-expansion
ok 5 - include options can still be examined
ok 1 - read config: xdg file exists and ~/.gitconfig doesn't
ok 6 - listing includes option and expansion
ok 2 - read config: xdg file exists and ~/.gitconfig exists
ok 13 - tar achiving
ok 3 - read with --get: xdg file exists and ~/.gitconfig doesn't
ok 6 - git read-tree -u -m: removed submodule leaves submodule directory and its contents in place
ok 7 - single file lookup does not expand includes by default
ok 4 - "$XDG_CONFIG_HOME overrides $HOME/.config/git
ok 8 - single file list does not expand includes by default
ok 5 - read with --get: xdg file exists and ~/.gitconfig exists
ok 6 - read with --list: xdg file exists and ~/.gitconfig doesn't
ok 9 - writing config file does not expand includes
ok 7 - read with --list: xdg file exists and ~/.gitconfig exists
ok 8 - Setup
ok 10 - config modification does not affect includes
ok 9 - Exclusion of a file in the XDG ignore file
ok 11 - missing include files are ignored
ok 14 - zip achiving, store only
ok 12 - absolute includes from command line work
ok 13 - relative includes from command line fail
ok 10 - $XDG_CONFIG_HOME overrides $HOME/.config/git/ignore
ok 11 - Exclusion in both XDG and local ignore files
ok 14 - absolute includes from blobs work
ok 12 - Exclusion in a non-XDG global ignore file
ok 15 - relative includes from blobs fail
ok 16 - absolute includes from stdin work
ok 13 - Checking XDG ignore file when HOME is unset
ok 17 - relative includes from stdin line fail
ok 14 - Checking attributes in the XDG attributes file
ok 18 - include cycles are detected
# passed all 18 test(s)
1..18
ok 15 - Checking XDG attributes when HOME is unset
ok 16 - $XDG_CONFIG_HOME overrides $HOME/.config/git/attributes
*** t1307-config-blob.sh ***
ok 17 - Checking attributes in both XDG and local attributes files
ok 18 - Checking attributes in a non-XDG global attributes file
ok 19 - write: xdg file exists and ~/.gitconfig doesn't
ok 20 - write: xdg file exists and ~/.gitconfig exists
ok 21 - write: ~/.config/git/ exists and config file doesn't
ok 1 - create config blob
# passed all 21 test(s)
1..21
ok 2 - list config blob contents
ok 3 - fetch value from blob
*** t1400-update-ref.sh ***
ok 4 - reading non-existing value from blob is an error
ok 5 - reading from blob and file is an error
ok 6 - reading from missing ref is an error
ok 7 - reading from non-blob is an error
ok 8 - setting a value in a blob is an error
ok 9 - deleting a value in a blob is an error
ok 10 - editing a blob is an error
ok 11 - parse errors in blobs are properly attributed
# passed all 11 test(s)
1..11
*** t1401-symbolic-ref.sh ***
ok 1 - setup
ok 1 - symbolic-ref writes HEAD
ok 2 - create refs/heads/master
ok 2 - symbolic-ref reads HEAD
ok 3 - create refs/heads/master
ok 3 - symbolic-ref refuses non-ref for HEAD
ok 4 - fail to delete refs/heads/master with stale ref
ok 5 - delete refs/heads/master
ok 15 - zip achiving, deflate
# passed all 15 test(s)
1..15
ok 6 - delete refs/heads/master without oldvalue verification
ok 4 - symbolic-ref refuses bare sha1
ok 5 - symbolic-ref deletes HEAD
ok 7 - fail to create refs/heads/gu/fixes
ok 6 - symbolic-ref deletes dangling HEAD
ok 8 - create refs/heads/master (by HEAD)
ok 7 - symbolic-ref fails to delete missing FOO
*** t1402-check-ref-format.sh ***
ok 8 - symbolic-ref fails to delete real ref
ok 9 - create refs/heads/master (by HEAD)
# passed all 8 test(s)
1..8
ok 10 - fail to delete refs/heads/master (by HEAD) with stale ref
ok 11 - delete refs/heads/master (by HEAD)
*** t1403-show-ref.sh ***
ok 12 - create refs/heads/master (by HEAD)
ok 13 - pack refs
ok 1 - ref name '' is invalid
ok 14 - move refs/heads/master (by HEAD)
ok 2 - ref name '/' is invalid
ok 3 - ref name '/' is invalid with options --allow-onelevel
ok 15 - delete refs/heads/master (by HEAD) should remove both packed and loose refs/heads/master
ok 4 - ref name '/' is invalid with options --normalize
ok 5 - ref name '/' is invalid with options --allow-onelevel --normalize
ok 16 - delete symref without dereference
ok 6 - ref name 'foo/bar/baz' is valid
ok 7 - ref name 'foo/bar/baz' is valid with options --normalize
ok 8 - ref name 'refs///heads/foo' is invalid
ok 9 - ref name 'refs///heads/foo' is valid with options --normalize
ok 10 - ref name 'heads/foo/' is invalid
ok 11 - ref name '/heads/foo' is invalid
ok 12 - ref name '/heads/foo' is valid with options --normalize
ok 17 - delete symref without dereference when the referred ref is packed
ok 13 - ref name '///heads/foo' is invalid
ok 14 - ref name '///heads/foo' is valid with options --normalize
ok 7 - git read-tree -u -m: removed submodule leaves submodule containing a .git directory alone
ok 15 - ref name './foo' is invalid
ok 18 - (not) create HEAD with old sha1
ok 19 - (not) prior created .git/refs/heads/master
ok 16 - ref name './foo/bar' is invalid
ok 17 - ref name 'foo/./bar' is invalid
ok 20 - create HEAD
ok 18 - ref name 'foo/bar/.' is invalid
ok 21 - (not) change HEAD with wrong SHA1
ok 19 - ref name '.refs/foo' is invalid
ok 22 - (not) changed .git/refs/heads/master
ok 20 - ref name 'refs/heads/foo.' is invalid
ok 21 - ref name 'heads/foo..bar' is invalid
ok 23 - create refs/heads/master (logged by touch)
ok 22 - ref name 'heads/foo?bar' is invalid
ok 23 - ref name 'foo./bar' is valid
ok 24 - update refs/heads/master (logged by touch)
ok 24 - ref name 'heads/foo.lock' is invalid
ok 25 - ref name 'heads///foo.lock' is invalid
ok 25 - set refs/heads/master (logged by touch)
ok 26 - ref name 'foo.lock/bar' is invalid
ok 26 - verifying refs/heads/master's log
ok 27 - ref name 'foo.lock///bar' is invalid
ok 28 - ref name 'heads/foo@bar' is valid
ok 29 - ref name 'heads/v@{ation' is invalid
ok 27 - enable core.logAllRefUpdates
ok 30 - ref name 'heads/foo\bar' is invalid
ok 1 - setup
ok 31 - ref name 'heads/foo ' is invalid
ok 28 - create refs/heads/master (logged by config)
ok 32 - ref name 'heads/foo' is invalid
ok 33 - ref name 'heads/fuß' is valid
ok 29 - update refs/heads/master (logged by config)
ok 34 - ref name 'heads/*foo/bar' is invalid with options --refspec-pattern
ok 35 - ref name 'heads/foo*/bar' is invalid with options --refspec-pattern
ok 36 - ref name 'heads/f*o/bar' is invalid with options --refspec-pattern
ok 30 - set refs/heads/master (logged by config)
ok 37 - ref name 'foo' is invalid
ok 31 - verifying refs/heads/master's log
ok 2 - show-ref
ok 38 - ref name 'foo' is valid with options --allow-onelevel
ok 39 - ref name 'foo' is invalid with options --refspec-pattern
ok 40 - ref name 'foo' is valid with options --refspec-pattern --allow-onelevel
ok 41 - ref name 'foo' is invalid with options --normalize
ok 32 - Query "master@{May 25 2005}" (before history)
ok 42 - ref name 'foo' is valid with options --allow-onelevel --normalize
ok 43 - ref name 'foo/bar' is valid
ok 3 - show-ref -q
ok 33 - Query master@{2005-05-25} (before history)
ok 44 - ref name 'foo/bar' is valid with options --allow-onelevel
ok 45 - ref name 'foo/bar' is valid with options --refspec-pattern
ok 46 - ref name 'foo/bar' is valid with options --refspec-pattern --allow-onelevel
ok 34 - Query "master@{May 26 2005 23:31:59}" (1 second before history)
ok 47 - ref name 'foo/bar' is valid with options --normalize
ok 48 - ref name 'foo/*' is invalid
ok 35 - Query "master@{May 26 2005 23:32:00}" (exactly history start)
ok 49 - ref name 'foo/*' is invalid with options --allow-onelevel
ok 50 - ref name 'foo/*' is valid with options --refspec-pattern
ok 36 - Query "master@{May 26 2005 23:32:30}" (first non-creation change)
ok 51 - ref name 'foo/*' is valid with options --refspec-pattern --allow-onelevel
ok 4 - show-ref --verify
ok 52 - ref name '*/foo' is invalid
ok 37 - Query "master@{2005-05-26 23:33:01}" (middle of history with gap)
ok 53 - ref name '*/foo' is invalid with options --allow-onelevel
ok 54 - ref name '*/foo' is valid with options --refspec-pattern
ok 38 - Query "master@{2005-05-26 23:38:00}" (middle of history)
ok 55 - ref name '*/foo' is valid with options --refspec-pattern --allow-onelevel
ok 56 - ref name '*/foo' is invalid with options --normalize
ok 57 - ref name '*/foo' is valid with options --refspec-pattern --normalize
ok 39 - Query "master@{2005-05-26 23:43:00}" (exact end of history)
ok 5 - show-ref --verify -q
ok 58 - ref name 'foo/*/bar' is invalid
ok 59 - ref name 'foo/*/bar' is invalid with options --allow-onelevel
ok 40 - Query "master@{2005-05-28}" (past end of history)
ok 60 - ref name 'foo/*/bar' is valid with options --refspec-pattern
ok 61 - ref name 'foo/*/bar' is valid with options --refspec-pattern --allow-onelevel
ok 62 - ref name '*' is invalid
ok 63 - ref name '*' is invalid with options --allow-onelevel
ok 64 - ref name '*' is invalid with options --refspec-pattern
ok 65 - ref name '*' is valid with options --refspec-pattern --allow-onelevel
ok 66 - ref name 'foo/*/*' is invalid with options --refspec-pattern
ok 67 - ref name 'foo/*/*' is invalid with options --refspec-pattern --allow-onelevel
ok 68 - ref name '*/foo/*' is invalid with options --refspec-pattern
ok 69 - ref name '*/foo/*' is invalid with options --refspec-pattern --allow-onelevel
ok 70 - ref name '*/*/foo' is invalid with options --refspec-pattern
ok 71 - ref name '*/*/foo' is invalid with options --refspec-pattern --allow-onelevel
ok 72 - ref name '/foo' is invalid
ok 73 - ref name '/foo' is invalid with options --allow-onelevel
ok 74 - ref name '/foo' is invalid with options --refspec-pattern
ok 75 - ref name '/foo' is invalid with options --refspec-pattern --allow-onelevel
ok 41 - creating initial files
ok 76 - ref name '/foo' is invalid with options --normalize
ok 42 - git commit logged updates
ok 6 - show-ref -d
ok 77 - ref name '/foo' is valid with options --allow-onelevel --normalize
ok 43 - git cat-file blob master:F (expect OTHER)
ok 78 - ref name '/foo' is invalid with options --refspec-pattern --normalize
ok 44 - git cat-file blob master@{2005-05-26 23:30}:F (expect TEST)
ok 79 - ref name '/foo' is valid with options --refspec-pattern --allow-onelevel --normalize
ok 45 - git cat-file blob master@{2005-05-26 23:42}:F (expect OTHER)
ok 46 - stdin test setup
ok 47 - -z fails without --stdin
ok 48 - stdin works with no input
ok 49 - stdin fails on empty line
ok 50 - stdin fails on only whitespace
ok 80 - check-ref-format --branch @{-1}
ok 51 - stdin fails on leading whitespace
ok 52 - stdin fails on unknown command
ok 53 - stdin fails on unbalanced quotes
ok 54 - stdin fails on invalid escape
ok 55 - stdin fails on junk after quoted argument
ok 81 - check-ref-format --branch from subdir
ok 7 - show-ref --heads, --tags, --head, pattern
ok 56 - stdin fails create with no ref
ok 82 - ref name 'heads/foo' simplifies to 'heads/foo'
# passed all 7 test(s)
1..7
ok 83 - ref name 'refs///heads/foo' simplifies to 'refs/heads/foo'
ok 57 - stdin fails create with bad ref name
ok 84 - ref name '/heads/foo' simplifies to 'heads/foo'
ok 85 - ref name '///heads/foo' simplifies to 'heads/foo'
ok 58 - stdin fails create with no new value
ok 86 - check-ref-format --normalize rejects 'foo'
*** t1410-reflog.sh ***
ok 87 - check-ref-format --normalize rejects '/foo'
ok 59 - stdin fails create with too many arguments
ok 88 - check-ref-format --normalize rejects 'heads/foo/../bar'
ok 89 - check-ref-format --normalize rejects 'heads/./foo'
ok 60 - stdin fails update with no ref
ok 90 - check-ref-format --normalize rejects 'heads\foo'
ok 61 - stdin fails update with bad ref name
ok 91 - check-ref-format --normalize rejects 'heads/foo.lock'
ok 92 - check-ref-format --normalize rejects 'heads///foo.lock'
ok 62 - stdin fails update with no new value
ok 93 - check-ref-format --normalize rejects 'foo.lock/bar'
ok 8 - git read-tree -u -m: replace submodule with a directory must fail
ok 94 - check-ref-format --normalize rejects 'foo.lock///bar'
ok 63 - stdin fails update with too many arguments
# passed all 94 test(s)
1..94
ok 64 - stdin fails delete with no ref
*** t1411-reflog-show.sh ***
ok 65 - stdin fails delete with bad ref name
ok 66 - stdin fails delete with too many arguments
ok 67 - stdin fails verify with too many arguments
ok 68 - stdin fails option with unknown name
ok 69 - stdin fails with duplicate refs
ok 70 - stdin create ref works
ok 1 - setup
ok 71 - stdin succeeds with quoted argument
ok 2 - log -g shows reflog headers
ok 3 - oneline reflog format
ok 72 - stdin succeeds with escaped character
ok 4 - reflog default format
ok 5 - override reflog default format
ok 73 - stdin update ref creates with zero old value
ok 6 - using @{now} syntax shows reflog date (multiline)
ok 74 - stdin update ref creates with empty old value
ok 7 - using @{now} syntax shows reflog date (oneline)
ok 8 - using @{now} syntax shows reflog date (format=%gd)
ok 75 - stdin create ref works with path with space to blob
ok 9 - using --date= shows reflog date (multiline)
ok 76 - stdin update ref fails with wrong old value
ok 10 - using --date= shows reflog date (oneline)
ok 11 - using --date= shows reflog date (format=%gd)
ok 77 - stdin update ref fails with bad old value
ok 78 - stdin create ref fails with bad new value
ok 12 - log.date does not invoke "--date" magic (multiline)
ok 79 - stdin create ref fails with zero new value
ok 80 - stdin update ref works with right old value
ok 13 - log.date does not invoke "--date" magic (oneline)
ok 81 - stdin delete ref fails with wrong old value
ok 14 - log.date does not invoke "--date" magic (format=%gd)
ok 15 - --date magic does not override explicit @{0} syntax
ok 82 - stdin delete ref fails with zero old value
ok 16 - empty reflog file
ok 83 - stdin update symref works option no-deref
ok 1 - setup
ok 84 - stdin delete symref works option no-deref
ok 85 - stdin delete ref works with right old value
ok 17 - git log -g -p shows diffs vs. parents
# passed all 17 test(s)
1..17
ok 86 - stdin update/create/verify combination works
*** t1412-reflog-loop.sh ***
ok 87 - stdin update refs works with identity updates
ok 88 - stdin update refs fails with wrong old value
ok 1 - setup commits
ok 9 - git read-tree -u -m: replace submodule containing a .git directory with a directory must fail
ok 2 - rewind
ok 89 - stdin delete refs works with packed and loose refs
ok 90 - stdin -z works on empty input
ok 3 - corrupt and check
ok 91 - stdin -z fails on empty line
ok 2 - setup reflog with alternating commits
ok 92 - stdin -z fails on empty command
ok 3 - reflog shows all entries
ok 4 - reflog expire --dry-run should not touch reflog
# passed all 3 test(s)
1..3
ok 93 - stdin -z fails on only whitespace
ok 94 - stdin -z fails on leading whitespace
*** t1420-lost-found.sh ***
ok 95 - stdin -z fails on unknown command
ok 5 - reflog expire
ok 96 - stdin -z fails create with no ref
ok 97 - stdin -z fails create with bad ref name
ok 98 - stdin -z fails create with no new value
ok 99 - stdin -z fails create with too many arguments
ok 100 - stdin -z fails update with no ref
ok 101 - stdin -z fails update with too few args
ok 102 - stdin -z fails update with bad ref name
ok 103 - stdin -z emits warning with empty new value
ok 6 - prune and fsck
ok 104 - stdin -z fails update with no new value
ok 1 - setup
ok 105 - stdin -z fails update with no old value
ok 7 - recover and check
ok 106 - stdin -z fails update with too many arguments
ok 107 - stdin -z fails delete with no ref
ok 108 - stdin -z fails delete with bad ref name
ok 109 - stdin -z fails delete with no old value
ok 2 - lost and found something
# passed all 2 test(s)
1..2
ok 110 - stdin -z fails delete with too many arguments
ok 111 - stdin -z fails verify with too many arguments
*** t1450-fsck.sh ***
ok 112 - stdin -z fails verify with no old value
ok 113 - stdin -z fails option with unknown name
ok 114 - stdin -z fails with duplicate refs
ok 115 - stdin -z create ref works
ok 116 - stdin -z update ref creates with zero old value
ok 8 - delete
ok 117 - stdin -z update ref creates with empty old value
ok 9 - rewind2
ok 10 - --expire=never
ok 118 - stdin -z create ref works with path with space to blob
ok 11 - gc.reflogexpire=never
ok 119 - stdin -z update ref fails with wrong old value
ok 120 - stdin -z update ref fails with bad old value
ok 1 - setup
ok 12 - gc.reflogexpire=false
ok 121 - stdin -z create ref fails when ref exists
ok 13 - checkout should not delete log for packed ref
ok 122 - stdin -z create ref fails with bad new value
# passed all 13 test(s)
1..13
ok 2 - loose objects borrowed from alternate are not missing
not ok 10 - git read-tree -u -m: replace submodule with a file must fail # TODO known breakage
ok 123 - stdin -z create ref fails with empty new value
ok 3 - HEAD is part of refs, valid objects appear valid
ok 4 - setup: helpers for corruption tests
*** t1500-rev-parse.sh ***
ok 124 - stdin -z update ref works with right old value
ok 125 - stdin -z delete ref fails with wrong old value
ok 1 - toplevel: is-bare-repository
ok 126 - stdin -z delete ref fails with zero old value
ok 2 - toplevel: is-inside-git-dir
ok 3 - toplevel: is-inside-work-tree
ok 4 - toplevel: prefix
ok 5 - toplevel: git-dir
ok 6 - .git/: is-bare-repository
ok 7 - .git/: is-inside-git-dir
ok 8 - .git/: is-inside-work-tree
ok 5 - object with bad sha1
ok 9 - .git/: prefix
ok 127 - stdin -z update symref works option no-deref
ok 10 - .git/: git-dir
ok 11 - .git/objects/: is-bare-repository
ok 12 - .git/objects/: is-inside-git-dir
ok 13 - .git/objects/: is-inside-work-tree
ok 6 - branch pointing to non-commit
ok 14 - .git/objects/: prefix
ok 128 - stdin -z delete symref works option no-deref
ok 15 - .git/objects/: git-dir
ok 16 - subdirectory: is-bare-repository
ok 129 - stdin -z delete ref works with right old value
ok 17 - subdirectory: is-inside-git-dir
ok 18 - subdirectory: is-inside-work-tree
ok 19 - subdirectory: prefix
ok 20 - subdirectory: git-dir
ok 21 - core.bare = true: is-bare-repository
ok 22 - core.bare = true: is-inside-git-dir
ok 7 - email without @ is okay
ok 130 - stdin -z update/create/verify combination works
ok 23 - core.bare = true: is-inside-work-tree
ok 24 - core.bare undefined: is-bare-repository
ok 25 - core.bare undefined: is-inside-git-dir
ok 26 - core.bare undefined: is-inside-work-tree
ok 131 - stdin -z update refs works with identity updates
ok 8 - email with embedded > is not okay
ok 27 - GIT_DIR=../.git, core.bare = false: is-bare-repository
ok 28 - GIT_DIR=../.git, core.bare = false: is-inside-git-dir
ok 29 - GIT_DIR=../.git, core.bare = false: is-inside-work-tree
ok 30 - GIT_DIR=../.git, core.bare = false: prefix
ok 132 - stdin -z update refs fails with wrong old value
ok 31 - GIT_DIR=../.git, core.bare = true: is-bare-repository
ok 32 - GIT_DIR=../.git, core.bare = true: is-inside-git-dir
ok 33 - GIT_DIR=../.git, core.bare = true: is-inside-work-tree
ok 9 - missing < email delimiter is reported nicely
ok 34 - GIT_DIR=../.git, core.bare = true: prefix
ok 35 - GIT_DIR=../.git, core.bare undefined: is-bare-repository
ok 133 - stdin -z delete refs works with packed and loose refs
ok 36 - GIT_DIR=../.git, core.bare undefined: is-inside-git-dir
# passed all 133 test(s)
1..133
ok 37 - GIT_DIR=../.git, core.bare undefined: is-inside-work-tree
ok 38 - GIT_DIR=../.git, core.bare undefined: prefix
*** t1501-worktree.sh ***
ok 39 - GIT_DIR=../repo.git, core.bare = false: is-bare-repository
ok 10 - missing email is reported nicely
ok 40 - GIT_DIR=../repo.git, core.bare = false: is-inside-git-dir
ok 41 - GIT_DIR=../repo.git, core.bare = false: is-inside-work-tree
ok 42 - GIT_DIR=../repo.git, core.bare = false: prefix
ok 43 - GIT_DIR=../repo.git, core.bare = true: is-bare-repository
ok 44 - GIT_DIR=../repo.git, core.bare = true: is-inside-git-dir
ok 45 - GIT_DIR=../repo.git, core.bare = true: is-inside-work-tree
ok 46 - GIT_DIR=../repo.git, core.bare = true: prefix
ok 47 - GIT_DIR=../repo.git, core.bare undefined: is-bare-repository
ok 48 - GIT_DIR=../repo.git, core.bare undefined: is-inside-git-dir
ok 11 - > in name is reported
ok 49 - GIT_DIR=../repo.git, core.bare undefined: is-inside-work-tree
ok 50 - GIT_DIR=../repo.git, core.bare undefined: prefix
# passed all 50 test(s)
1..50
ok 1 - setup
ok 2 - setup: helper for testing rev-parse
ok 3 - setup: core.worktree = relative path
*** t1502-rev-parse-parseopt.sh ***
ok 4 - outside
ok 12 - integer overflow in timestamps is reported
ok 5 - inside work tree
ok 1 - test --parseopt help output
ok 6 - empty prefix is actually written out
not ok 11 - git read-tree -u -m: replace submodule containing a .git directory with a file must fail # TODO known breakage
ok 2 - test --parseopt
ok 3 - test --parseopt with mixed options and arguments
ok 13 - malformatted tree object
ok 4 - test --parseopt with --
ok 5 - test --parseopt --stop-at-non-option
ok 7 - subdir of work tree
ok 6 - test --parseopt --keep-dashdash
ok 8 - setup: core.worktree = absolute path
ok 7 - test --parseopt --keep-dashdash --stop-at-non-option with --
ok 8 - test --parseopt --keep-dashdash --stop-at-non-option without --
ok 14 - tag pointing to nonexistent
ok 9 - test --parseopt --stuck-long
ok 10 - test --parseopt --stuck-long and empty optional argument
ok 9 - outside
ok 11 - test --parseopt --stuck-long and long option with unset optional argument
ok 12 - test --parseopt --stuck-long and short option with unset optional argument
# passed all 12 test(s)
1..12
*** t1503-rev-parse-verify.sh ***
ok 15 - tag pointing to something else than its type
ok 10 - inside work tree
ok 16 - cleaned up
ok 17 - rev-list --verify-objects
ok 11 - subdir of work tree
ok 12 - setup: GIT_WORK_TREE=relative (override core.worktree)
ok 13 - outside
ok 14 - inside work tree
ok 18 - rev-list --verify-objects with bad sha1
ok 1 - set up basic repo with 1 file (hello) and 4 commits
ok 15 - subdir of work tree
ok 19 - fsck notices blob entry pointing to null sha1
ok 16 - setup: GIT_WORK_TREE=absolute, below git dir
ok 2 - works with one good rev
ok 17 - outside
ok 20 - fsck notices submodule entry pointing to null sha1
ok 3 - fails with any bad rev or many good revs
ok 4 - fails silently when using -q
ok 18 - in repo.git
ok 21 - fsck notices . as blob
ok 5 - no stdout output on error
ok 19 - inside work tree
ok 20 - subdir of work tree
ok 6 - use --default
ok 22 - fsck notices . as tree
ok 21 - find work tree from repo
ok 22 - find work tree from work tree
ok 7 - master@{n} for various n
ok 23 - _gently() groks relative GIT_DIR & GIT_WORK_TREE
# passed all 7 test(s)
1..7
*** t1504-ceiling-dirs.sh ***
ok 24 - diff-index respects work tree under .git dir
ok 25 - diff-files respects work tree under .git dir
ok 23 - fsck notices .. as blob
ok 26 - git diff respects work tree under .git dir
ok 27 - git grep
ok 1 - no_ceil
ok 2 - ceil_empty
ok 28 - git commit
ok 3 - ceil_at_parent
ok 4 - ceil_at_parent_slash
ok 24 - fsck notices .. as tree
ok 5 - ceil_at_trash
ok 6 - ceil_at_trash_slash
ok 29 - absolute pathspec should fail gracefully
ok 7 - ceil_at_sub
ok 8 - ceil_at_sub_slash
ok 30 - make_relative_path handles double slashes in GIT_DIR
ok 31 - relative $GIT_WORK_TREE and git subprocesses
ok 9 - subdir_no_ceil
# passed all 31 test(s)
1..31
ok 10 - subdir_ceil_empty
ok 11 - subdir_ceil_at_trash: prefix
ok 12 - subdir_ceil_at_trash_slash: prefix
ok 13 - subdir_ceil_at_sub: prefix
*** t1505-rev-parse-last.sh ***
ok 14 - subdir_ceil_at_sub_slash: prefix
ok 12 - git read-tree -u -m: modified submodule does not update submodule work tree
ok 15 - subdir_ceil_at_top: prefix
ok 25 - fsck notices .git as blob
ok 16 - subdir_ceil_at_top_slash: prefix
ok 17 - subdir_ceil_at_top_no_resolve
ok 18 - subdir_ceil_at_top_slash_no_resolve
ok 19 - subdir_ceil_at_subdir
ok 20 - subdir_ceil_at_subdir_slash
ok 21 - subdir_ceil_at_su
ok 22 - subdir_ceil_at_su_slash
ok 23 - subdir_ceil_at_sub_di
ok 24 - subdir_ceil_at_sub_di_slash
ok 25 - subdir_ceil_at_subdi
ok 26 - subdir_ceil_at_subdi_slash
ok 27 - second_of_two: prefix
ok 28 - first_of_two: prefix
ok 26 - fsck notices .git as tree
ok 29 - second_of_three: prefix
ok 30 - git_dir_specified
ok 31 - sd_no_ceil
ok 32 - sd_ceil_empty
ok 33 - sd_ceil_at_trash: prefix
ok 34 - sd_ceil_at_trash_slash: prefix
ok 35 - sd_ceil_at_s: prefix
ok 36 - sd_ceil_at_s_slash: prefix
ok 37 - sd_ceil_at_sd
ok 38 - sd_ceil_at_sd_slash
ok 39 - sd_ceil_at_su
ok 40 - sd_ceil_at_su_slash
ok 27 - fsck notices .GIT as blob
ok 41 - sd_ceil_at_s_di
ok 42 - sd_ceil_at_s_di_slash
ok 43 - sd_ceil_at_sdi
ok 44 - sd_ceil_at_sdi_slash
ok 1 - setup
# passed all 44 test(s)
1..44
*** t1506-rev-parse-diagnosis.sh ***
ok 2 - @{-1} works
ok 3 - @{-1}~2 works
ok 4 - @{-1}^2 works
ok 28 - fsck notices .GIT as tree
ok 5 - @{-1}@{1} works
ok 6 - @{-2} works
ok 7 - @{-3} fails
# passed all 7 test(s)
1..7
ok 1 - set up basic repo
*** t1507-rev-parse-upstream.sh ***
ok 29 - fsck notices .gI{u200c}T as blob
ok 2 - correct file objects
ok 3 - correct relative file objects (0)
ok 4 - correct relative file objects (1)
ok 5 - correct relative file objects (2)
ok 6 - correct relative file objects (3)
ok 7 - correct relative file objects (4)
ok 30 - fsck notices .gI{u200c}T as tree
ok 8 - correct relative file objects (5)
ok 9 - correct relative file objects (6)
ok 10 - incorrect revision id
ok 31 - fsck notices .Git as blob
ok 11 - incorrect file in sha1:path
ok 32 - fsck notices .Git as tree
ok 12 - incorrect file in :path and :N:path
ok 13 - invalid @{n} reference
ok 14 - relative path not found
ok 15 - relative path outside worktree
ok 33 - fsck notices git~1 as blob
ok 16 - relative path when cwd is outside worktree
ok 17 - relative path when startup_info is NULL
ok 18 - <commit>:file correctly diagnosed after a pathname
ok 1 - setup
ok 19 - dotdot is not an empty set
ok 2 - @{upstream} resolves to correct full name
ok 34 - fsck notices git~1 as tree
ok 3 - @{u} resolves to correct full name
ok 20 - arg before dashdash must be a revision (missing)
ok 4 - my-side@{upstream} resolves to correct full name
ok 21 - arg before dashdash must be a revision (file)
ok 5 - upstream of branch with @ in middle
ok 6 - upstream of branch with @ at start
ok 22 - arg before dashdash must be a revision (ambiguous)
ok 7 - upstream of branch with @ at end
# passed all 22 test(s)
1..22
ok 8 - refs/heads/my-side@{upstream} does not resolve to my-side{upstream}
ok 13 - git read-tree -u -m: modified submodule does not update submodule work tree to invalid commit
*** t1508-at-combinations.sh ***
ok 35 - fsck notices .git. as blob
ok 36 - fsck notices .git. as tree
ok 9 - my-side@{u} resolves to correct commit
ok 10 - not-tracking@{u} fails
ok 37 - fsck notices .\.GIT\foobar as blob
ok 11 - <branch>@{u}@{1} resolves correctly
ok 38 - fsck notices .\.GIT\foobar as tree
ok 12 - @{u} without specifying branch fails on a detached HEAD
ok 13 - checkout -b new my-side@{u} forks from the same
ok 39 - fsck notices .git\foobar as blob
ok 14 - merge my-side@{u} records the correct name
ok 1 - setup
ok 15 - branch -d other@{u}
ok 2 - HEAD = refs/heads/new-branch
ok 40 - fsck notices .git\foobar as tree
ok 3 - @{1} = new-one
ok 4 - HEAD@{1} = new-one
ok 5 - @{now} = new-two
ok 16 - checkout other@{u}
ok 17 - branch@{u} works when tracking a local branch
ok 6 - HEAD@{now} = new-two
ok 7 - @{-1} = refs/heads/old-branch
ok 18 - branch@{u} error message when no upstream
ok 8 - @{-1}@{0} = old-two
ok 19 - @{u} error message when no upstream
ok 9 - @{-1}@{1} = old-one
ok 10 - @{u} = refs/heads/upstream-branch
ok 20 - branch@{u} error message with misspelt branch
ok 11 - HEAD@{u} = refs/heads/upstream-branch
ok 12 - @{u}@{1} = upstream-one
ok 21 - @{u} error message when not on a branch
ok 41 - fsck notices missing blob
ok 13 - @{-1}@{u} = refs/heads/master
ok 22 - branch@{u} error message if upstream branch not fetched
ok 14 - @{-1}@{u}@{1} = master-one
ok 15 - @ = new-two
ok 16 - @@{u} = refs/heads/upstream-branch
ok 17 - @@/at-test = refs/heads/@@/at-test
ok 14 - git read-tree -u -m: modified submodule does not update submodule work tree from invalid commit
ok 18 - @/at-test = refs/heads/@/at-test
ok 19 - @at-test = refs/heads/@at-test
ok 20 - @{u}@{-1} is nonsensical
ok 21 - @{0}@{0} is nonsensical
ok 22 - @{1}@{u} is nonsensical
ok 23 - HEAD@{-1} is nonsensical
ok 24 - @{-1}@{-1} is nonsensical
ok 42 - fsck notices missing subtree
ok 25 - HEAD@{3} = old-two
ok 26 - @{3} is nonsensical
ok 27 - switch to old-branch
ok 28 - HEAD = refs/heads/old-branch
ok 29 - HEAD@{1} = new-two
ok 23 - pull works when tracking a local branch
ok 30 - @{1} = old-one
ok 24 - @{u} works when tracking a local branch
ok 25 - log -g other@{u}
ok 31 - create path with @
ok 32 - @:normal = content
ok 26 - log -g other@{u}@{now}
ok 33 - @:fun@ny = content
ok 43 - fsck notices missing root tree
# passed all 33 test(s)
1..33
ok 27 - @{reflog}-parsing does not look beyond colon
*** t1509-root-worktree.sh ***
ok 28 - @{upstream}-parsing does not look beyond colon
# passed all 28 test(s)
1..28
1..0 # SKIP Dangerous test skipped. Read this test if you want to execute it
*** t1510-repo-setup.sh ***
*** t1511-rev-parse-caret.sh ***
ok 44 - fsck notices missing parent
ok 45 - fsck notices missing tagged object
ok 1 - #0: nonbare repo, no explicit configuration
ok 2 - #1: GIT_WORK_TREE without explicit GIT_DIR is accepted
ok 1 - setup
ok 2 - ref^{non-existent}
ok 46 - fsck notices ref pointing to missing commit
ok 3 - ref^{}
ok 3 - #2: worktree defaults to cwd with explicit GIT_DIR
ok 4 - ref^{commit}
ok 15 - git read-tree -u --reset: added submodule creates empty directory
ok 4 - #2b: relative GIT_DIR
ok 5 - ref^{tree}
ok 5 - #3: setup
ok 6 - ref^{tag}
ok 47 - fsck notices ref pointing to missing tag
# passed all 47 test(s)
1..47
ok 7 - ref^{/.}
ok 8 - ref^{/non-existent}
ok 9 - ref^{/Initial}
# passed all 9 test(s)
1..9
ok 6 - #3: explicit GIT_WORK_TREE and GIT_DIR at toplevel
*** t1512-rev-parse-disambiguation.sh ***
ok 1 - blob and tree
ok 7 - #3: explicit GIT_WORK_TREE and GIT_DIR in subdir
ok 2 - warn ambiguity when no candidate matches type hint
ok 3 - disambiguate tree-ish
ok 4 - disambiguate blob
ok 5 - disambiguate tree
*** t1513-rev-parse-prefix.sh ***
ok 6 - first commit
ok 8 - #3: explicit GIT_WORK_TREE from parent of worktree
ok 7 - disambiguate commit-ish
ok 8 - disambiguate commit
ok 1 - setup
ok 9 - #3: explicit GIT_WORK_TREE from nephew of worktree
ok 2 - empty prefix -- file
ok 3 - valid prefix -- file
ok 9 - log name1..name2 takes only commit-ishes on both ends
ok 4 - valid prefix -- ../file
ok 10 - rev-parse name1..name2 takes only commit-ishes on both ends
ok 5 - empty prefix HEAD:./path
ok 11 - git log takes only commit-ish
ok 6 - valid prefix HEAD:./path
ok 12 - git reset takes only commit-ish
ok 10 - #3: chdir_to_toplevel uses worktree, not git dir
ok 13 - first tag
ok 7 - valid prefix HEAD:../path
not ok 14 - two semi-ambiguous commit-ish # TODO known breakage
not ok 15 - three semi-ambiguous tree-ish # TODO known breakage
ok 8 - prefix ignored with HEAD:top
ok 16 - parse describe name
ok 9 - disambiguate path with valid prefix
ok 10 - file and refs with prefix
ok 11 - two-levels deep
ok 11 - #3: chdir_to_toplevel uses worktree (from subdir)
# passed all 11 test(s)
1..11
*** t1600-index.sh ***
ok 12 - #4: core.worktree without GIT_DIR set is accepted
ok 16 - git read-tree -u --reset: added submodule leaves existing empty directory alone
ok 1 - setup
ok 2 - bogus GIT_INDEX_VERSION issues warning
ok 3 - out of bounds GIT_INDEX_VERSION issues warning
ok 4 - no warning with bogus GIT_INDEX_VERSION and existing index
ok 17 - more history
ok 5 - out of bounds index.version issues warning
not ok 18 - parse describe name taking advantage of generation # TODO known breakage
ok 19 - parse describe name not ignoring ambiguity
ok 13 - #5: core.worktree + GIT_WORK_TREE is accepted
ok 6 - GIT_INDEX_VERSION takes precedence over config
# passed all 6 test(s)
1..6
*** t1700-split-index.sh ***
ok 20 - ambiguous commit-ish
ok 21 - rev-parse --disambiguate
ok 17 - git read-tree -u --reset: added submodule does remove untracked unignored file with same name when forced
ok 1 - enable split index
ok 14 - #6: setting GIT_DIR brings core.worktree to life
ok 22 - ambiguous 40-hex ref
ok 2 - add one file
ok 23 - ambiguous short sha1 ref
# still have 3 known breakage(s)
# passed all remaining 20 test(s)
1..23
ok 3 - disable split index
*** t2000-checkout-cache-clash.sh ***
ok 4 - enable split index again, "one" now belongs to base index"
ok 15 - #6b: GIT_DIR set, core.worktree relative
ok 5 - modify original file, base index untouched
ok 1 - git update-index --add various paths.
ok 6 - add another file, which stays index
ok 2 - git checkout-index without -f should fail on conflicting work tree.
ok 3 - git checkout-index with -f should succeed.
ok 4 - git checkout-index conflicting paths.
ok 7 - remove file not in base index
ok 16 - #6c: GIT_DIR set, core.worktree=../wt (absolute)
ok 5 - checkout-index -f twice with --prefix
# passed all 5 test(s)
1..5
ok 8 - remove file in base index
*** t2001-checkout-cache-clash.sh ***
ok 9 - add original file back
ok 10 - add new file
ok 11 - unify index, two files remain
ok 1 - git update-index --add path0/file0
ok 17 - #6d: GIT_DIR set, core.worktree=../wt (relative)
# passed all 11 test(s)
1..11
ok 2 - writing tree out with git write-tree
*** t2002-checkout-cache-u.sh ***
ok 3 - git update-index --add path1/file1
ok 4 - writing tree out with git write-tree
ok 5 - read previously written tree and checkout.
ok 6 - add a symlink
ok 7 - writing tree out with git write-tree
ok 1 - preparation
ok 8 - read previously written tree and checkout.
ok 9 - checking out conflicting path with -f
ok 18 - #6e: GIT_DIR set, core.worktree=../.. (absolute)
# passed all 9 test(s)
1..9
ok 2 - without -u, git checkout-index smudges stat information.
*** t2003-checkout-cache-mkdir.sh ***
ok 3 - with -u, git checkout-index picks up stat information from new files.
# passed all 3 test(s)
1..3
*** t2004-checkout-cache-temp.sh ***
ok 1 - setup
ok 19 - #6f: GIT_DIR set, core.worktree=../.. (relative)
ok 2 - have symlink in place where dir is expected.
ok 18 - git read-tree -u --reset: replace tracked file with submodule creates empty directory
ok 3 - use --prefix=path2/
ok 20 - #7: setup
ok 4 - use --prefix=tmp-
ok 5 - use --prefix=tmp- but with a conflicting file and dir
ok 6 - use --prefix=tmp/orary/ where tmp is a symlink
ok 1 - preparation
ok 7 - use --prefix=tmp/orary- where tmp is a symlink
ok 2 - checkout one stage 0 to temporary file
ok 8 - use --prefix=tmp- where tmp-path1 is a symlink
ok 21 - #7: explicit GIT_WORK_TREE and GIT_DIR at toplevel
ok 9 - apply filter from working tree .gitattributes with --prefix
ok 10 - apply CRLF filter from working tree .gitattributes with --prefix
# passed all 10 test(s)
1..10
ok 3 - checkout all stage 0 to temporary files
ok 22 - #7: explicit GIT_WORK_TREE and GIT_DIR in subdir
ok 4 - prepare 3-way merge
*** t2005-checkout-index-symlinks.sh ***
ok 5 - checkout one stage 2 to temporary file
ok 6 - checkout all stage 2 to temporary files
ok 23 - #7: explicit GIT_WORK_TREE from parent of worktree
ok 7 - checkout all stages/one file to nothing
ok 1 - preparation
ok 2 - the checked-out symlink must be a file
ok 3 - the file must be the blob we added during the setup
# passed all 3 test(s)
1..3
ok 8 - checkout all stages/one file to temporary files
*** t2006-checkout-index-basic.sh ***
ok 9 - checkout some stages/one file to temporary files
ok 10 - checkout all stages/all files to temporary files
ok 11 - -- path0: no entry
ok 24 - #7: explicit GIT_WORK_TREE from nephew of worktree
ok 12 - -- path1: all 3 stages
ok 13 - -- path2: no stage 1, have stage 2 and 3
ok 1 - checkout-index --gobbledegook
ok 14 - -- path3: no stage 2, have stage 1 and 3
ok 2 - checkout-index -h in broken repository
ok 15 - -- path4: no stage 3, have stage 1 and 3
# passed all 2 test(s)
1..2
ok 16 - -- asubdir/path5: no stage 2 and 3 have stage 1
ok 25 - #7: chdir_to_toplevel uses worktree, not git dir
*** t2007-checkout-symlink.sh ***
ok 17 - checkout --temp within subdir
ok 18 - checkout --temp symlink
# passed all 18 test(s)
1..18
ok 26 - #7: chdir_to_toplevel uses worktree (from subdir)
*** t2008-checkout-subdir.sh ***
ok 27 - #8: gitfile, easy case
ok 19 - git read-tree -u --reset: replace directory with submodule
ok 1 - setup
ok 2 - switch from symlink to dir
ok 3 - Remove temporary directories & switch to master
ok 28 - #9: GIT_WORK_TREE accepted with gitfile
ok 1 - setup
ok 4 - switch from dir to symlink
# passed all 4 test(s)
1..4
*** t2009-checkout-statinfo.sh ***
ok 2 - remove and restore with relative path
ok 29 - #10: GIT_DIR can point to gitfile
ok 3 - checkout with empty prefix
ok 4 - checkout with simple prefix
ok 5 - checkout with complex relative path
ok 30 - #10b: relative GIT_DIR can point to gitfile
ok 6 - relative path outside tree should fail
ok 7 - incorrect relative path to file should fail (1)
ok 1 - setup
ok 31 - #11: setup
ok 8 - incorrect relative path should fail (2)
ok 9 - incorrect relative path should fail (3)
# passed all 9 test(s)
1..9
*** t2010-checkout-ambiguous.sh ***
ok 2 - branch switching
ok 32 - #11: explicit GIT_WORK_TREE and GIT_DIR at toplevel
ok 3 - path checkout
# passed all 3 test(s)
1..3
ok 33 - #11: explicit GIT_WORK_TREE and GIT_DIR in subdir
ok 1 - setup
*** t2011-checkout-invalid-head.sh ***
ok 2 - reference must be a tree
ok 3 - branch switching
ok 4 - checkout world from the index
ok 5 - non ambiguous call
ok 34 - #11: explicit GIT_WORK_TREE from parent of worktree
ok 6 - allow the most common case
ok 1 - setup
ok 7 - check ambiguity
ok 2 - checkout should not start branch from a tree
ok 8 - disambiguate checking out from a tree-ish
ok 3 - checkout master from invalid HEAD
# passed all 3 test(s)
1..3
ok 9 - accurate error message with more than one ref
# passed all 9 test(s)
1..9
*** t2012-checkout-last.sh ***
*** t2013-checkout-submodule.sh ***
ok 35 - #11: explicit GIT_WORK_TREE from nephew of worktree
ok 20 - git read-tree -u --reset: removed submodule leaves submodule directory and its contents in place
ok 36 - #11: chdir_to_toplevel uses worktree, not git dir
ok 1 - setup
ok 2 - "checkout -" does not work initially
ok 3 - first branch switch
ok 4 - "checkout -" switches back
ok 5 - "checkout -" switches forth
ok 37 - #11: chdir_to_toplevel uses worktree (from subdir)
ok 6 - detach HEAD
ok 1 - setup
ok 7 - "checkout -" attaches again
ok 8 - "checkout -" detaches again
ok 38 - #12: core.worktree with gitfile is accepted
ok 2 - "reset <submodule>" updates the index
ok 39 - #13: core.worktree+GIT_WORK_TREE accepted (with gitfile)
ok 3 - "checkout <submodule>" updates the index only
ok 4 - "checkout <submodule>" honors diff.ignoreSubmodules
ok 5 - "checkout <submodule>" honors submodule.*.ignore from .gitmodules
ok 9 - more switches
ok 6 - "checkout <submodule>" honors submodule.*.ignore from .git/config
ok 10 - switch to the last
ok 40 - #14: core.worktree with GIT_DIR pointing to gitfile
ok 21 - git read-tree -u --reset: removed submodule leaves submodule containing a .git directory alone
ok 11 - switch to second from the last
ok 12 - switch to third from the last
ok 41 - #14b: core.worktree is relative to actual git dir
ok 42 - #15: setup
ok 43 - #15: explicit GIT_WORK_TREE and GIT_DIR at toplevel
ok 13 - switch to fourth from the last
ok 44 - #15: explicit GIT_WORK_TREE and GIT_DIR in subdir
ok 45 - #15: explicit GIT_WORK_TREE from parent of worktree
not ok 22 - git read-tree -u --reset: replace submodule with a directory must fail # TODO known breakage
ok 14 - switch to twelfth from the last
ok 15 - merge base test setup
ok 46 - #15: explicit GIT_WORK_TREE from nephew of worktree
ok 16 - another...master
ok 47 - #15: chdir_to_toplevel uses worktree, not git dir
ok 17 - ...master
ok 18 - master...
ok 48 - #15: chdir_to_toplevel uses worktree (from subdir)
ok 49 - #16a: implicitly bare repo (cwd inside .git dir)
ok 19 - "checkout -" works after a rebase A
ok 50 - #16b: bare .git (cwd inside .git dir)
ok 51 - #16c: bare .git has no worktree
ok 52 - #16d: bareness preserved across alias
ok 53 - #16e: bareness preserved by --bare
ok 20 - "checkout -" works after a rebase A B
not ok 23 - git read-tree -u --reset: replace submodule containing a .git directory with a directory must fail # TODO known breakage
ok 54 - #17: GIT_WORK_TREE without explicit GIT_DIR is accepted (bare case)
ok 7 - git checkout: added submodule creates empty directory
ok 55 - #18: bare .git named by GIT_DIR has no worktree
ok 56 - #19: setup
ok 57 - #19: explicit GIT_WORK_TREE and GIT_DIR at toplevel
ok 58 - #19: explicit GIT_WORK_TREE and GIT_DIR in subdir
not ok 24 - git read-tree -u --reset: replace submodule with a file must fail # TODO known breakage
ok 59 - #19: explicit GIT_WORK_TREE from parent of worktree
ok 60 - #19: explicit GIT_WORK_TREE from nephew of worktree
ok 61 - #19: chdir_to_toplevel uses worktree, not git dir
ok 8 - git checkout: added submodule leaves existing empty directory alone
ok 21 - "checkout -" works after a rebase -i A
ok 62 - #19: chdir_to_toplevel uses worktree (from subdir)
ok 63 - #20a: core.worktree without GIT_DIR accepted (inside .git)
ok 9 - git checkout: added submodule doesn't remove untracked unignored file with same name
ok 64 - #20b/c: core.worktree and core.bare conflict
ok 65 - #21: setup, core.worktree warns before overriding core.bare
ok 22 - "checkout -" works after a rebase -i A B
# passed all 22 test(s)
1..22
*** t2014-switch.sh ***
ok 66 - #21: explicit GIT_WORK_TREE and GIT_DIR at toplevel
ok 1 - setup
ok 2 - check all changes are staged
ok 3 - second commit
not ok 25 - git read-tree -u --reset: replace submodule containing a .git directory with a file must fail # TODO known breakage
ok 4 - check
ok 67 - #21: explicit GIT_WORK_TREE and GIT_DIR in subdir
# passed all 4 test(s)
1..4
*** t2015-checkout-unborn.sh ***
ok 68 - #21: explicit GIT_WORK_TREE from parent of worktree
ok 1 - setup
ok 69 - #21: explicit GIT_WORK_TREE from nephew of worktree
ok 2 - checkout from unborn preserves untracked files
ok 3 - checkout from unborn preserves index contents
ok 4 - checkout from unborn merges identical index contents
ok 70 - #21: chdir_to_toplevel uses worktree, not git dir
ok 5 - checking out another branch from unborn state
ok 6 - checking out in a newly created repo
# passed all 6 test(s)
1..6
*** t2016-checkout-patch.sh ***
ok 71 - #21: chdir_to_toplevel uses worktree (from subdir)
ok 10 - git checkout: replace tracked file with submodule creates empty directory
ok 1 - setup
ok 72 - #22a: core.worktree = GIT_DIR = .git dir
ok 26 - git read-tree -u --reset: modified submodule does not update submodule work tree
ok 73 - #22b: core.worktree child of .git, GIT_DIR=.git
ok 2 - saying "n" does nothing
ok 11 - git checkout: replace directory with submodule
ok 74 - #22c: core.worktree = .git/.., GIT_DIR=.git
ok 75 - #22.2: core.worktree and core.bare conflict
ok 76 - #23: setup
ok 77 - #23: explicit GIT_WORK_TREE and GIT_DIR at toplevel
ok 78 - #23: explicit GIT_WORK_TREE and GIT_DIR in subdir
ok 3 - git checkout -p
ok 79 - #23: explicit GIT_WORK_TREE from parent of worktree
ok 80 - #23: explicit GIT_WORK_TREE from nephew of worktree
ok 81 - #23: chdir_to_toplevel uses worktree, not git dir
ok 27 - git read-tree -u --reset: modified submodule does not update submodule work tree to invalid commit
ok 12 - git checkout: removed submodule leaves submodule directory and its contents in place
ok 82 - #23: chdir_to_toplevel uses worktree (from subdir)
ok 83 - #24: bare repo has no worktree (gitfile case)
ok 84 - #25: GIT_WORK_TREE accepted if GIT_DIR unset (bare gitfile case)
ok 4 - git checkout -p with staged changes
ok 85 - #26: bare repo has no worktree (GIT_DIR -> gitfile case)
ok 86 - #27: setup
ok 87 - #27: explicit GIT_WORK_TREE and GIT_DIR at toplevel
ok 88 - #27: explicit GIT_WORK_TREE and GIT_DIR in subdir
ok 28 - git read-tree -u --reset: modified submodule does not update submodule work tree from invalid commit
ok 89 - #27: explicit GIT_WORK_TREE from parent of worktree
# still have 6 known breakage(s)
# passed all remaining 22 test(s)
1..28
ok 5 - git checkout -p HEAD with NO staged changes: abort
ok 13 - git checkout: removed submodule leaves submodule containing a .git directory alone
ok 90 - #27: explicit GIT_WORK_TREE from nephew of worktree
*** t2017-checkout-orphan.sh ***
ok 91 - #27: chdir_to_toplevel uses worktree, not git dir
ok 1 - Setup
ok 2 - --orphan creates a new orphan branch from HEAD
ok 92 - #27: chdir_to_toplevel uses worktree (from subdir)
ok 93 - #28: core.worktree and core.bare conflict (gitfile case)
ok 3 - --orphan creates a new orphan branch from <start_point>
ok 4 - --orphan must be rejected with -b
ok 94 - #29: setup
ok 5 - --orphan must be rejected with -t
ok 6 - --orphan ignores branch.autosetupmerge
ok 95 - #29: explicit GIT_WORK_TREE and GIT_DIR at toplevel
ok 7 - --orphan makes reflog by default
ok 6 - git checkout -p HEAD with NO staged changes: apply
ok 8 - --orphan does not make reflog when core.logAllRefUpdates = false
ok 96 - #29: explicit GIT_WORK_TREE and GIT_DIR in subdir
ok 9 - --orphan with -l makes reflog when core.logAllRefUpdates = false
ok 97 - #29: explicit GIT_WORK_TREE from parent of worktree
ok 10 - giving up --orphan not committed when -l and core.logAllRefUpdates = false deletes reflog
ok 11 - --orphan is rejected with an existing name
ok 14 - git checkout: replace submodule with a directory must fail
ok 98 - #29: explicit GIT_WORK_TREE from nephew of worktree
ok 12 - --orphan refuses to switch if a merge is needed
ok 13 - cannot --detach on an unborn branch
# passed all 13 test(s)
1..13
*** t2018-checkout-branch.sh ***
ok 99 - #29: chdir_to_toplevel uses worktree, not git dir
ok 100 - #29: chdir_to_toplevel uses worktree (from subdir)
ok 1 - setup
ok 101 - #30: core.worktree and core.bare conflict (gitfile version)
ok 7 - git checkout -p HEAD with change already staged
ok 2 - checkout -b to a new branch, set to HEAD
ok 102 - #31: setup
ok 3 - checkout -b to a new branch, set to an explicit ref
ok 4 - checkout -b to a new branch with unmergeable changes fails
ok 103 - #31: explicit GIT_WORK_TREE and GIT_DIR at toplevel
ok 5 - checkout -f -b to a new branch with unmergeable changes discards changes
ok 6 - checkout -b to a new branch preserves mergeable changes
ok 104 - #31: explicit GIT_WORK_TREE and GIT_DIR in subdir
ok 7 - checkout -f -b to a new branch with mergeable changes discards changes
ok 105 - #31: explicit GIT_WORK_TREE from parent of worktree
ok 8 - checkout -b to an existing branch fails
ok 9 - checkout -b to @{-1} fails with the right branch name
ok 106 - #31: explicit GIT_WORK_TREE from nephew of worktree
ok 10 - checkout -B to an existing branch resets branch to HEAD
ok 15 - git checkout: replace submodule containing a .git directory with a directory must fail
ok 8 - git checkout -p HEAD^
ok 11 - checkout -B to an existing branch from detached HEAD resets branch to HEAD
ok 107 - #31: chdir_to_toplevel uses worktree, not git dir
ok 12 - checkout -B to an existing branch with an explicit ref resets branch to that ref
ok 13 - checkout -B to an existing branch with unmergeable changes fails
ok 14 - checkout -f -B to an existing branch with unmergeable changes discards changes
ok 108 - #31: chdir_to_toplevel uses worktree (from subdir)
# passed all 108 test(s)
1..108
ok 15 - checkout -B to an existing branch preserves mergeable changes
ok 16 - checkout -f -B to an existing branch with mergeable changes discards changes
ok 17 - checkout -b <describe>
ok 18 - checkout -B to the current branch works
# passed all 18 test(s)
1..18
*** t2019-checkout-ambiguous-ref.sh ***
ok 9 - git checkout -p handles deletion
*** t2020-checkout-detach.sh ***
not ok 16 - git checkout: replace submodule with a file must fail # TODO known breakage
ok 1 - setup ambiguous refs
ok 2 - checkout ambiguous ref succeeds
ok 3 - checkout produces ambiguity warning
ok 4 - checkout chooses branch over tag
ok 5 - checkout reports switch to branch
ok 6 - checkout vague ref succeeds
ok 7 - checkout produces ambiguity warning
ok 8 - checkout chooses branch over tag
ok 9 - checkout reports switch to branch
# passed all 9 test(s)
1..9
*** t2021-checkout-overwrite.sh ***
ok 1 - setup
ok 2 - checkout branch does not detach
ok 3 - checkout tag detaches
ok 1 - setup
ok 4 - checkout branch by full name detaches
ok 2 - create a commit where dir a/b changed to file
ok 10 - path limiting works: dir
ok 5 - checkout non-ref detaches
ok 3 - checkout commit with dir must not remove untracked a/b
ok 6 - checkout ref^0 detaches
ok 4 - create a commit where dir a/b changed to symlink
ok 7 - checkout --detach detaches
ok 8 - checkout --detach without branch name
ok 5 - checkout commit with dir must not remove untracked a/b
ok 6 - the symlink remained
# passed all 6 test(s)
1..6
ok 9 - checkout --detach errors out for non-commit
*** t2022-checkout-paths.sh ***
ok 10 - checkout --detach errors out for extra argument
ok 11 - checkout --detached and -b are incompatible
ok 12 - checkout --detach moves HEAD
ok 1 - setup
ok 2 - checking out paths out of a tree does not clobber unrelated paths
ok 13 - checkout warns on orphan commits
ok 14 - checkout warns on orphan commits: output
ok 15 - checkout warns orphaning 1 of 2 commits
not ok 17 - git checkout: replace submodule containing a .git directory with a file must fail # TODO known breakage
ok 16 - checkout warns orphaning 1 of 2 commits: output
ok 11 - path limiting works: -- dir
ok 3 - do not touch unmerged entries matching $path but not in $tree
# passed all 3 test(s)
1..3
*** t2023-checkout-m.sh ***
ok 17 - checkout does not warn leaving ref tip
ok 18 - checkout does not warn leaving ref tip
ok 19 - checkout does not warn leaving reachable commit
ok 20 - checkout does not warn leaving reachable commit
ok 21 - tracking count is accurate after orphan check
# passed all 21 test(s)
1..21
*** t2024-checkout-dwim.sh ***
ok 1 - setup
ok 2 - git merge master
ok 3 - -m restores 2-way conflicted+resolved file
ok 4 - -m restores 3-way conflicted+resolved file
# passed all 4 test(s)
1..4
*** t2030-unresolve-info.sh ***
ok 12 - path limiting works: HEAD^ -- dir
ok 1 - setup
ok 1 - setup
ok 18 - git checkout: modified submodule does not update submodule work tree
ok 2 - checkout of non-existing branch fails
ok 3 - checkout of branch from multiple remotes fails #1
ok 2 - add records switch clears
ok 4 - checkout of branch from a single remote succeeds #1
ok 13 - path limiting works: foo inside dir
ok 14 - none of this moved HEAD
# passed all 14 test(s)
1..14
ok 5 - checkout of branch from a single remote succeeds #2
*** t2050-git-dir-relative.sh ***
ok 6 - --no-guess suppresses branch auto-vivification
ok 1 - Setting up post-commit hook
ok 2 - post-commit hook used ordinarily
ok 3 - rm records reset clears
ok 3 - post-commit-hook created and used from top dir
ok 4 - post-commit-hook from sub dir
# passed all 4 test(s)
1..4
*** t2100-update-cache-badpath.sh ***
ok 4 - plumbing clears
ok 1 - git update-index --add to add various paths.
ok 2 - git update-index to add conflicting path path0/file0 should fail.
ok 3 - git update-index to add conflicting path path1/file1 should fail.
ok 4 - git update-index to add conflicting path path2 should fail.
ok 5 - git update-index to add conflicting path path3 should fail.
# passed all 5 test(s)
1..5
*** t2101-update-index-reupdate.sh ***
ok 5 - add records checkout -m undoes
ok 1 - update-index --add
ok 2 - update-index --again
ok 3 - update-index --remove --again
ok 4 - first commit
ok 6 - unmerge with plumbing
ok 5 - update-index again
ok 6 - update-index --update from subdir
ok 19 - git checkout: modified submodule does not update submodule work tree to invalid commit
ok 7 - update-index --update with pathspec
# passed all 7 test(s)
1..7
*** t2102-update-index-symlinks.sh ***
ok 7 - setup more remotes with unconventional refspecs
ok 8 - checkout of branch from multiple remotes fails #2
ok 1 - preparation
ok 7 - rerere and rerere forget
ok 2 - modify the symbolic link
ok 3 - the index entry must still be a symbolic link
# passed all 3 test(s)
1..3
*** t2103-update-index-ignore-missing.sh ***
ok 9 - checkout of branch from multiple remotes fails #3
ok 10 - checkout of branch from a single remote succeeds #3
ok 8 - rerere and rerere forget (subdirectory)
ok 11 - checkout of branch from a single remote succeeds #4
ok 1 - basics
ok 12 - checkout of branch with a file having the same name fails
ok 9 - rerere forget (binary)
ok 2 - --ignore-missing --refresh
ok 13 - checkout <branch> -- succeeds, even if a file with the same name exists
ok 10 - rerere forget (add-add conflict)
# passed all 13 test(s)
1..13
# passed all 10 test(s)
1..10
ok 3 - --unmerged --refresh
ok 4 - --ignore-submodules --refresh (1)
*** t2104-update-index-skip-worktree.sh ***
*** t2105-update-index-gitfile.sh ***
ok 5 - --ignore-submodules --refresh (2)
# passed all 5 test(s)
1..5
*** t2106-update-index-assume-unchanged.sh ***
ok 1 - setup
ok 2 - index is at version 2
ok 3 - update-index --skip-worktree
ok 4 - index is at version 3 after having some skip-worktree entries
ok 5 - ls-files -t
ok 6 - update-index --no-skip-worktree
ok 7 - index version is back to 2 when there is no skip-worktree entry
ok 1 - submodule with absolute .git file
# passed all 7 test(s)
1..7
ok 2 - add gitlink to absolute .git file
*** t2107-update-index-basic.sh ***
ok 20 - git checkout: modified submodule does not update submodule work tree from invalid commit
ok 1 - setup
ok 3 - submodule with relative .git file
ok 4 - add gitlink to relative .git file
# passed all 4 test(s)
1..4
ok 1 - update-index --nonsense fails
ok 2 - update-index --nonsense dumps usage
*** t2200-add-update.sh ***
ok 2 - do not switch branches with dirty file
# passed all 2 test(s)
1..2
ok 3 - update-index -h with corrupt index
*** t2201-add-update-typechange.sh ***
ok 4 - --cacheinfo complains of missing arguments
ok 5 - --cacheinfo does not accept blob null sha1
ok 1 - setup
ok 2 - update
ok 3 - update noticed a removal
ok 4 - update touched correct path
ok 5 - update did not touch other tracked files
ok 6 - update did not touch untracked files
ok 1 - setup
ok 6 - --cacheinfo does not accept gitlink null sha1
ok 7 - cache tree has not been corrupted
ok 8 - update from a subdirectory
ok 9 - change gets noticed
ok 7 - --cacheinfo mode,sha1,path (new syntax)
# passed all 7 test(s)
1..7
ok 10 - non-qualified update in subdir updates from the root
*** t2202-add-addremove.sh ***
ok 11 - replace a file with a symlink
ok 12 - add everything changed
ok 13 - touch and then add -u
ok 14 - touch and then add explicitly
ok 2 - modify
ok 3 - diff-files
ok 15 - add -n -u should not add but just report
ok 1 - setup
ok 4 - diff-index
ok 5 - add -u
ok 2 - git add --all
ok 3 - Just "git add" is a no-op
ok 16 - add -u resolves unmerged paths
# passed all 3 test(s)
1..3
ok 6 - commit -a
ok 17 - "add -u non-existent" should fail
# passed all 17 test(s)
1..17
*** t2203-add-intent.sh ***
# passed all 6 test(s)
1..6
*** t2204-add-ignored.sh ***
*** t2300-cd-to-toplevel.sh ***
ok 1 - intent to add
ok 2 - check result of "add -N"
ok 1 - setup
ok 2 - no complaints for unignored file
ok 3 - intent to add is just an ordinary empty blob
ok 21 - git checkout -f: added submodule creates empty directory
ok 3 - no complaints for unignored dir/file
ok 4 - intent to add does not clobber existing paths
ok 4 - no complaints for unignored dir
ok 1 - at physical root
ok 5 - no complaints for unignored d*
ok 6 - complaints for ignored ign
ok 7 - complaints for ignored ign output
ok 2 - at physical subdir
ok 8 - complaints for ignored ign with unignored file
ok 9 - complaints for ignored ign with unignored file output
ok 10 - complaints for ignored dir/ign
ok 11 - complaints for ignored dir/ign output
ok 5 - i-t-a entry is simply ignored
ok 3 - at symbolic root
ok 12 - complaints for ignored dir/ign with unignored file
ok 13 - complaints for ignored dir/ign with unignored file output
ok 14 - complaints for ignored dir/sub
ok 15 - complaints for ignored dir/sub output
ok 4 - at symbolic subdir
ok 6 - can commit with an unrelated i-t-a entry in index
ok 16 - complaints for ignored dir/sub with unignored file
ok 17 - complaints for ignored dir/sub with unignored file output
ok 5 - at internal symbolic subdir
ok 18 - complaints for ignored dir/sub/ign
ok 19 - complaints for ignored dir/sub/ign output
# passed all 5 test(s)
1..5
ok 7 - can "commit -a" with an i-t-a entry
ok 20 - complaints for ignored dir/sub/ign with unignored file
*** t3000-ls-files-others.sh ***
ok 21 - complaints for ignored dir/sub/ign with unignored file output
ok 22 - complaints for ignored sub/file
ok 23 - complaints for ignored sub/file output
ok 24 - complaints for ignored sub/file with unignored file
ok 25 - complaints for ignored sub/file with unignored file output
ok 26 - complaints for ignored sub
ok 8 - cache-tree invalidates i-t-a paths
ok 27 - complaints for ignored sub output
# passed all 8 test(s)
1..8
ok 28 - complaints for ignored sub with unignored file
ok 29 - complaints for ignored sub with unignored file output
ok 1 - setup
*** t3001-ls-files-others-exclude.sh ***
ok 2 - setup: expected output
ok 30 - complaints for ignored sub/file
ok 31 - complaints for ignored sub/file output
ok 3 - ls-files --others
ok 4 - ls-files --others --directory
ok 32 - complaints for ignored sub/file with unignored file
ok 33 - complaints for ignored sub/file with unignored file output
ok 5 - --no-empty-directory hides empty directory
ok 34 - complaints for ignored sub/ign
ok 35 - complaints for ignored sub/ign output
ok 36 - complaints for ignored sub/ign with unignored file
ok 37 - complaints for ignored sub/ign with unignored file output
ok 1 - git ls-files --others with various exclude options.
ok 2 - git ls-files --others with \r\n line endings.
ok 38 - complaints for ignored sub in dir
ok 39 - complaints for ignored sub in dir output
ok 3 - setup skip-worktree gitignore
ok 40 - complaints for ignored sub/file in dir
ok 41 - complaints for ignored sub/file in dir output
ok 4 - git ls-files --others with various exclude options.
ok 5 - restore gitignore
ok 42 - complaints for ignored sub/ign in dir
ok 43 - complaints for ignored sub/ign in dir output
ok 6 - git status honors core.excludesfile
ok 44 - complaints for ignored ign in sub
ok 45 - complaints for ignored ign in sub output
ok 7 - trailing slash in exclude allows directory match(1)
ok 6 - ls-files --others with symlinked submodule
# passed all 6 test(s)
1..6
ok 8 - trailing slash in exclude allows directory match (2)
ok 46 - complaints for ignored file in sub
ok 9 - trailing slash in exclude forces directory match (1)
ok 47 - complaints for ignored file in sub output
# passed all 47 test(s)
1..47
ok 10 - trailing slash in exclude forces directory match (2)
*** t3002-ls-files-dashpath.sh ***
ok 11 - negated exclude matches can override previous ones
*** t3003-ls-files-exclude.sh ***
ok 12 - excluded directory overrides content patterns
ok 13 - negated directory doesn't affect content patterns
ok 14 - subdirectory ignore (setup)
ok 1 - setup
ok 15 - subdirectory ignore (toplevel)
ok 2 - git ls-files without path restriction.
ok 16 - subdirectory ignore (l1/l2)
ok 3 - git ls-files with path restriction.
ok 17 - subdirectory ignore (l1)
ok 22 - git checkout -f: added submodule leaves existing empty directory alone
ok 18 - show/hide empty ignored directory (setup)
ok 4 - git ls-files with path restriction with --.
ok 1 - create repo with file
ok 19 - show empty ignored directory with --directory
ok 5 - git ls-files with path restriction with -- --.
ok 2 - ls-files output contains file (cached)
ok 20 - hide empty ignored directory with --no-empty-directory
ok 6 - git ls-files with no path restriction.
ok 3 - ls-files output contains file (modified)
# passed all 6 test(s)
1..6
ok 4 - add file to gitignore
ok 21 - show/hide empty ignored sub-directory (setup)
ok 5 - ls-files output contains file (cached)
ok 22 - show empty ignored sub-directory with --directory
*** t3004-ls-files-basic.sh ***
ok 6 - ls-files output contains file (modified)
ok 23 - hide empty ignored sub-directory with --no-empty-directory
ok 24 - pattern matches prefix completely
ok 7 - ls-files -i lists only tracked-but-ignored files
# passed all 7 test(s)
1..7
ok 25 - ls-files with "**" patterns
ok 26 - ls-files with "**" patterns and no slashes
# passed all 26 test(s)
1..26
*** t3005-ls-files-relative.sh ***
ok 1 - ls-files in empty repository
*** t3006-ls-files-long.sh ***
ok 2 - ls-files with nonexistent path
ok 3 - ls-files with nonsense option
ok 4 - ls-files -h in corrupt repository
ok 1 - prepare
ok 1 - setup
ok 2 - ls-files with mixed levels
ok 23 - git checkout -f: added submodule does remove untracked unignored file with same name when forced
ok 3 - ls-files -c
ok 2 - overly-long path by itself is not a problem
ok 5 - ls-files with absolute paths to symlinks
ok 4 - ls-files -o
# passed all 5 test(s)
1..5
# passed all 4 test(s)
1..4
ok 3 - overly-long path does not replace another by mistake
# passed all 3 test(s)
1..3
*** t3010-ls-files-killed-modified.sh ***
*** t3020-ls-files-error-unmatch.sh ***
*** t3030-merge-recursive.sh ***
ok 1 - setup
ok 2 - git ls-files --error-unmatch should fail with unmatched path.
ok 3 - git ls-files --error-unmatch should succeed eith matched paths.
# passed all 3 test(s)
1..3
*** t3031-merge-criscross.sh ***
ok 1 - git update-index --add to add various paths.
ok 2 - git ls-files -k to show killed files.
ok 3 - git ls-files -k output (w/o icase)
ok 4 - git ls-files -k output (w/ icase)
ok 5 - git ls-files -m to show modified files.
ok 6 - validate git ls-files -m output.
# passed all 6 test(s)
1..6
ok 1 - setup 1
*** t3032-merge-recursive-options.sh ***
ok 2 - setup 2
ok 3 - setup 3
ok 1 - setup
ok 2 - naive merge fails
ok 3 - --ignore-space-change makes merge succeed
ok 1 - setup repo with criss-cross history
ok 24 - git checkout -f: replace tracked file with submodule creates empty directory
ok 4 - setup 4
ok 2 - recursive merge between F and G, causes segfault
ok 4 - naive cherry-pick fails
# passed all 2 test(s)
1..2
ok 5 - -Xignore-space-change makes cherry-pick succeed
*** t3040-subprojects-basic.sh ***
ok 6 - --ignore-space-change: our w/s-only change wins
ok 5 - setup 5
ok 7 - --ignore-space-change: their real change wins over w/s
ok 1 - setup: create superproject
ok 8 - --ignore-space-change: does not ignore new spaces
ok 9 - --ignore-all-space drops their new spaces
ok 6 - setup 6
ok 10 - --ignore-all-space keeps our new spaces
ok 11 - --ignore-space-at-eol
ok 7 - setup 7
# passed all 11 test(s)
1..11
ok 2 - setup: create subprojects
*** t3050-subprojects-fetch.sh ***
ok 3 - check if fsck ignores the subprojects
ok 4 - check if commit in a subproject detected
ok 5 - check if a changed subproject HEAD can be committed
ok 6 - check if diff-index works for subproject elements
ok 8 - setup 8
ok 7 - check if diff-tree works for subproject elements
ok 8 - check if git diff works for subproject elements
ok 1 - setup
ok 9 - setup 9
ok 9 - check if clone works
ok 10 - merge-recursive simple
ok 11 - merge-recursive result
ok 10 - removing and adding subproject
ok 11 - checkout in superproject
# passed all 11 test(s)
1..11
ok 12 - fail if the index has unresolved entries
ok 2 - clone
*** t3060-ls-files-with-tree.sh ***
ok 13 - merge-recursive remove conflict
ok 14 - merge-recursive remove conflict
ok 3 - advance
ok 25 - git checkout -f: replace directory with submodule
ok 15 - merge-recursive d/f simple
ok 16 - merge-recursive result
ok 17 - merge-recursive d/f conflict
ok 18 - merge-recursive d/f conflict result
ok 1 - setup
ok 2 - git -ls-files --with-tree should succeed from subdir
ok 3 - git -ls-files --with-tree should add entries from named tree.
# passed all 3 test(s)
1..3
ok 19 - merge-recursive d/f conflict the other way
ok 20 - merge-recursive d/f conflict result the other way
*** t3070-wildmatch.sh ***
ok 21 - merge-recursive d/f conflict
ok 4 - fetch
# passed all 4 test(s)
1..4
ok 22 - merge-recursive d/f conflict result
ok 1 - wildmatch: match 'foo' 'foo'
ok 2 - wildmatch: no match 'foo' 'bar'
ok 3 - wildmatch: match '' ''
ok 4 - wildmatch: match 'foo' '???'
ok 5 - wildmatch: no match 'foo' '??'
*** t3100-ls-tree-restrict.sh ***
ok 6 - wildmatch: match 'foo' '*'
ok 23 - merge-recursive d/f conflict
ok 7 - wildmatch: match 'foo' 'f*'
ok 8 - wildmatch: no match 'foo' '*f'
ok 24 - merge-recursive d/f conflict result
ok 9 - wildmatch: match 'foo' '*foo*'
ok 10 - wildmatch: match 'foobar' '*ob*a*r*'
ok 11 - wildmatch: match 'aaaaaaabababab' '*ab'
ok 12 - wildmatch: match 'foo*' 'foo\*'
ok 13 - wildmatch: no match 'foobar' 'foo\*bar'
ok 25 - reset and 3-way merge
ok 14 - wildmatch: match 'f\oo' 'f\\oo'
ok 15 - wildmatch: match 'ball' '*[al]?'
ok 16 - wildmatch: no match 'ten' '[ten]'
ok 17 - wildmatch: no match 'ten' '**[!te]'
ok 18 - wildmatch: no match 'ten' '**[!ten]'
ok 19 - wildmatch: match 'ten' 't[a-g]n'
ok 20 - wildmatch: no match 'ten' 't[!a-g]n'
ok 21 - wildmatch: match 'ton' 't[!a-g]n'
ok 22 - wildmatch: match 'ton' 't[^a-g]n'
ok 23 - wildmatch: match 'a]b' 'a[]]b'
ok 24 - wildmatch: match 'a-b' 'a[]-]b'
ok 25 - wildmatch: match 'a]b' 'a[]-]b'
ok 26 - wildmatch: no match 'aab' 'a[]-]b'
ok 27 - wildmatch: match 'aab' 'a[]a-]b'
ok 26 - reset and bind merge
ok 1 - setup
ok 28 - wildmatch: match ']' ']'
ok 2 - ls-tree plain
ok 29 - wildmatch: no match 'foo/baz/bar' 'foo*bar'
ok 30 - wildmatch: no match 'foo/baz/bar' 'foo**bar'
ok 31 - wildmatch: no match 'foobazbar' 'foo**bar'
ok 3 - ls-tree recursive
ok 32 - wildmatch: match 'foo/baz/bar' 'foo/**/bar'
ok 33 - wildmatch: match 'foo/baz/bar' 'foo/**/**/bar'
ok 4 - ls-tree recursive with -t
ok 34 - wildmatch: match 'foo/b/a/z/bar' 'foo/**/bar'
ok 35 - wildmatch: match 'foo/b/a/z/bar' 'foo/**/**/bar'
ok 36 - wildmatch: match 'foo/bar' 'foo/**/bar'
ok 27 - merge-recursive w/ empty work tree - ours has rename
ok 5 - ls-tree recursive with -d
ok 37 - wildmatch: match 'foo/bar' 'foo/**/**/bar'
ok 6 - ls-tree filtered with path
ok 38 - wildmatch: no match 'foo/bar' 'foo?bar'
ok 39 - wildmatch: no match 'foo/bar' 'foo[/]bar'
ok 40 - wildmatch: no match 'foo/bar' 'f[^eiu][^eiu][^eiu][^eiu][^eiu]r'
ok 41 - wildmatch: match 'foo-bar' 'f[^eiu][^eiu][^eiu][^eiu][^eiu]r'
ok 7 - ls-tree filtered with path1 path0
ok 42 - wildmatch: match 'foo' '**/foo'
ok 43 - wildmatch: match 'XXX/foo' '**/foo'
ok 44 - wildmatch: match 'bar/baz/foo' '**/foo'
ok 8 - ls-tree filtered with path0/
ok 45 - wildmatch: no match 'bar/baz/foo' '*/foo'
ok 46 - wildmatch: no match 'foo/bar/baz' '**/bar*'
ok 28 - merge-recursive w/ empty work tree - theirs has rename
ok 47 - wildmatch: match 'deep/foo/bar/baz' '**/bar/*'
ok 48 - wildmatch: no match 'deep/foo/bar/baz/' '**/bar/*'
ok 9 - ls-tree filtered with path2
ok 49 - wildmatch: match 'deep/foo/bar/baz/' '**/bar/**'
ok 50 - wildmatch: no match 'deep/foo/bar' '**/bar/*'
ok 10 - ls-tree filtered with path2/
ok 51 - wildmatch: match 'deep/foo/bar/' '**/bar/**'
ok 52 - wildmatch: no match 'foo/bar/baz' '**/bar**'
ok 53 - wildmatch: match 'foo/bar/baz/x' '*/bar/**'
ok 11 - ls-tree filtered with path2/baz
ok 54 - wildmatch: no match 'deep/foo/bar/baz/x' '*/bar/**'
ok 55 - wildmatch: match 'deep/foo/bar/baz/x' '**/bar/*/*'
ok 56 - wildmatch: no match 'acrt' 'a[c-c]st'
ok 12 - ls-tree filtered with path2/bak
ok 57 - wildmatch: match 'acrt' 'a[c-c]rt'
ok 58 - wildmatch: no match ']' '[!]-]'
ok 59 - wildmatch: match 'a' '[!]-]'
ok 13 - ls-tree -t filtered with path2/bak
ok 60 - wildmatch: no match '' '\'
ok 29 - merge removes empty directories
ok 61 - wildmatch: no match '\' '\'
ok 62 - wildmatch: no match 'XXX/\' '*/\'
ok 63 - wildmatch: match 'XXX/\' '*/\\'
ok 14 - ls-tree with one path a prefix of the other
ok 64 - wildmatch: match 'foo' 'foo'
# passed all 14 test(s)
1..14
ok 65 - wildmatch: match '@foo' '@foo'
not ok 30 - merge-recursive simple w/submodule # TODO known breakage
ok 66 - wildmatch: no match 'foo' '@foo'
not ok 31 - merge-recursive simple w/submodule result # TODO known breakage
ok 67 - wildmatch: match '[ab]' '\[ab]'
ok 26 - git checkout -f: removed submodule leaves submodule directory and its contents in place
*** t3101-ls-tree-dirname.sh ***
ok 68 - wildmatch: match '[ab]' '[[]ab]'
ok 69 - wildmatch: match '[ab]' '[[:]ab]'
ok 70 - wildmatch: no match '[ab]' '[[::]ab]'
ok 71 - wildmatch: match '[ab]' '[[:digit]ab]'
ok 72 - wildmatch: match '[ab]' '[\[:]ab]'
ok 73 - wildmatch: match '?a?b' '\??\?b'
ok 74 - wildmatch: match 'abc' '\a\b\c'
ok 75 - wildmatch: no match 'foo' ''
ok 76 - wildmatch: match 'foo/bar/baz/to' '**/t[o]'
ok 32 - merge-recursive copy vs. rename
ok 77 - wildmatch: match 'a1B' '[[:alpha:]][[:digit:]][[:upper:]]'
ok 78 - wildmatch: no match 'a' '[[:digit:][:upper:][:space:]]'
ok 79 - wildmatch: match 'A' '[[:digit:][:upper:][:space:]]'
ok 80 - wildmatch: match '1' '[[:digit:][:upper:][:space:]]'
ok 81 - wildmatch: no match '1' '[[:digit:][:upper:][:spaci:]]'
ok 82 - wildmatch: match ' ' '[[:digit:][:upper:][:space:]]'
ok 83 - wildmatch: no match '.' '[[:digit:][:upper:][:space:]]'
ok 84 - wildmatch: match '.' '[[:digit:][:punct:][:space:]]'
ok 85 - wildmatch: match '5' '[[:xdigit:]]'
ok 86 - wildmatch: match 'f' '[[:xdigit:]]'
not ok 33 - merge-recursive rename vs. rename/symlink # TODO known breakage
ok 1 - setup
ok 87 - wildmatch: match 'D' '[[:xdigit:]]'
# still have 3 known breakage(s)
# passed all remaining 30 test(s)
1..33
ok 88 - wildmatch: match '_' '[[:alnum:][:alpha:][:blank:][:cntrl:][:digit:][:graph:][:lower:][:print:][:punct:][:space:][:upper:][:xdigit:]]'
ok 89 - wildmatch: match '_' '[[:alnum:][:alpha:][:blank:][:cntrl:][:digit:][:graph:][:lower:][:print:][:punct:][:space:][:upper:][:xdigit:]]'
ok 90 - wildmatch: match '.' '[^[:alnum:][:alpha:][:blank:][:cntrl:][:digit:][:lower:][:space:][:upper:][:xdigit:]]'
ok 2 - ls-tree plain
ok 91 - wildmatch: match '5' '[a-c[:digit:]x-z]'
ok 92 - wildmatch: match 'b' '[a-c[:digit:]x-z]'
ok 93 - wildmatch: match 'y' '[a-c[:digit:]x-z]'
ok 3 - ls-tree recursive
ok 94 - wildmatch: no match 'q' '[a-c[:digit:]x-z]'
*** t3102-ls-tree-wildcards.sh ***
ok 95 - wildmatch: match ']' '[\\-^]'
ok 96 - wildmatch: no match '[' '[\\-^]'
ok 97 - wildmatch: match '-' '[\-_]'
ok 4 - ls-tree filter 1.txt
ok 98 - wildmatch: match ']' '[\]]'
ok 99 - wildmatch: no match '\]' '[\]]'
ok 100 - wildmatch: no match '\' '[\]]'
ok 5 - ls-tree filter path1/b/c/1.txt
ok 101 - wildmatch: no match 'ab' 'a[]b'
ok 102 - wildmatch: no match 'a[]b' 'a[]b'
ok 103 - wildmatch: no match 'ab[' 'ab['
ok 104 - wildmatch: no match 'ab' '[!'
ok 6 - ls-tree filter all 1.txt files
ok 105 - wildmatch: no match 'ab' '[-'
ok 106 - wildmatch: match '-' '[-]'
ok 107 - wildmatch: no match '-' '[a-'
ok 7 - ls-tree filter directories
ok 108 - wildmatch: no match '-' '[!a-'
ok 109 - wildmatch: match '-' '[--A]'
ok 110 - wildmatch: match '5' '[--A]'
ok 111 - wildmatch: match ' ' '[ --]'
ok 8 - ls-tree filter odd names
ok 112 - wildmatch: match '$' '[ --]'
ok 1 - setup
ok 113 - wildmatch: match '-' '[ --]'
ok 9 - ls-tree filter missing files and extra slashes
ok 114 - wildmatch: no match '0' '[ --]'
ok 115 - wildmatch: match '-' '[---]'
ok 116 - wildmatch: match '-' '[------]'
ok 2 - ls-tree a[a] matches literally
ok 10 - ls-tree filter is leading path match
# passed all 2 test(s)
1..2
ok 117 - wildmatch: no match 'j' '[a-e-n]'
ok 118 - wildmatch: match '-' '[a-e-n]'
ok 119 - wildmatch: match 'a' '[!------]'
ok 11 - ls-tree --full-name
*** t3103-ls-tree-misc.sh ***
ok 120 - wildmatch: no match '[' '[]-a]'
ok 121 - wildmatch: match '^' '[]-a]'
ok 12 - ls-tree --full-tree
ok 122 - wildmatch: no match '^' '[!]-a]'
ok 123 - wildmatch: match '[' '[!]-a]'
ok 124 - wildmatch: match '^' '[a^bc]'
ok 125 - wildmatch: match '-b]' '[a-]b]'
ok 13 - ls-tree --full-tree -r
ok 126 - wildmatch: no match '\' '[\]'
ok 127 - wildmatch: match '\' '[\\]'
ok 128 - wildmatch: no match '\' '[!\\]'
ok 129 - wildmatch: match 'G' '[A-\\]'
ok 14 - ls-tree --abbrev=5
ok 130 - wildmatch: no match 'aaabbb' 'b*a'
ok 131 - wildmatch: no match 'aabcaa' '*ba*'
ok 132 - wildmatch: match ',' '[,]'
ok 15 - ls-tree --name-only
ok 133 - wildmatch: match ',' '[\\,]'
ok 134 - wildmatch: match '\' '[\\,]'
ok 1 - setup
ok 135 - wildmatch: match '-' '[,-.]'
ok 136 - wildmatch: no match '+' '[,-.]'
ok 16 - ls-tree --name-only -r
ok 2 - ls-tree fails with non-zero exit code on broken tree
ok 137 - wildmatch: no match '-.]' '[,-.]'
# passed all 16 test(s)
1..16
# passed all 2 test(s)
1..2
ok 138 - wildmatch: match '2' '[\1-\3]'
ok 139 - wildmatch: match '3' '[\1-\3]'
ok 140 - wildmatch: no match '4' '[\1-\3]'
ok 141 - wildmatch: match '\' '[[-\]]'
*** t3200-branch.sh ***
*** t3201-branch-contains.sh ***
ok 142 - wildmatch: match '[' '[[-\]]'
ok 143 - wildmatch: match ']' '[[-\]]'
ok 144 - wildmatch: no match '-' '[[-\]]'
ok 145 - wildmatch: match '-adobe-courier-bold-o-normal--12-120-75-75-m-70-iso8859-1' '-*-*-*-*-*-*-12-*-*-*-m-*-*-*'
ok 146 - wildmatch: no match '-adobe-courier-bold-o-normal--12-120-75-75-X-70-iso8859-1' '-*-*-*-*-*-*-12-*-*-*-m-*-*-*'
ok 147 - wildmatch: no match '-adobe-courier-bold-o-normal--12-120-75-75-/-70-iso8859-1' '-*-*-*-*-*-*-12-*-*-*-m-*-*-*'
ok 148 - wildmatch: match 'XXX/adobe/courier/bold/o/normal//12/120/75/75/m/70/iso8859/1' 'XXX/*/*/*/*/*/*/12/*/*/*/m/*/*/*'
ok 149 - wildmatch: no match 'XXX/adobe/courier/bold/o/normal//12/120/75/75/X/70/iso8859/1' 'XXX/*/*/*/*/*/*/12/*/*/*/m/*/*/*'
ok 150 - wildmatch: match 'abcd/abcdefg/abcdefghijk/abcdefghijklmnop.txt' '**/*a*b*g*n*t'
ok 151 - wildmatch: no match 'abcd/abcdefg/abcdefghijk/abcdefghijklmnop.txtz' '**/*a*b*g*n*t'
ok 152 - wildmatch: no match 'foo' '*/*/*'
ok 153 - wildmatch: no match 'foo/bar' '*/*/*'
ok 154 - wildmatch: match 'foo/bba/arr' '*/*/*'
ok 155 - wildmatch: no match 'foo/bb/aa/rr' '*/*/*'
ok 156 - wildmatch: match 'foo/bb/aa/rr' '**/**/**'
ok 157 - wildmatch: match 'abcXdefXghi' '*X*i'
ok 158 - wildmatch: no match 'ab/cXd/efXg/hi' '*X*i'
ok 159 - wildmatch: match 'ab/cXd/efXg/hi' '*/*X*/*/*i'
ok 160 - wildmatch: match 'ab/cXd/efXg/hi' '**/*X*/**/*i'
ok 161 - pathmatch: match 'foo' 'foo'
ok 1 - prepare a trivial repository
ok 162 - pathmatch: no match 'foo' 'fo'
ok 163 - pathmatch: match 'foo/bar' 'foo/bar'
ok 2 - git branch --help should not have created a bogus branch
ok 164 - pathmatch: match 'foo/bar' 'foo/*'
ok 165 - pathmatch: match 'foo/bba/arr' 'foo/*'
ok 166 - pathmatch: match 'foo/bba/arr' 'foo/**'
ok 167 - pathmatch: match 'foo/bba/arr' 'foo*'
ok 168 - pathmatch: match 'foo/bba/arr' 'foo**'
ok 1 - setup
ok 3 - branch -h in broken repository
ok 169 - pathmatch: match 'foo/bba/arr' 'foo/*arr'
ok 4 - git branch abc should create a branch
ok 2 - branch --contains=master
ok 170 - pathmatch: match 'foo/bba/arr' 'foo/**arr'
ok 171 - pathmatch: no match 'foo/bba/arr' 'foo/*z'
ok 172 - pathmatch: no match 'foo/bba/arr' 'foo/**z'
ok 3 - branch --contains master
ok 5 - git branch a/b/c should create a branch
ok 173 - pathmatch: match 'foo/bar' 'foo?bar'
ok 6 - git branch HEAD should fail
ok 174 - pathmatch: match 'foo/bar' 'foo[/]bar'
ok 4 - branch --contains=side
ok 175 - pathmatch: no match 'foo' '*/*/*'
ok 176 - pathmatch: no match 'foo/bar' '*/*/*'
ok 7 - git branch -l d/e/f should create a branch and a log
ok 5 - branch --contains with pattern implies --list
ok 177 - pathmatch: match 'foo/bba/arr' '*/*/*'
ok 178 - pathmatch: match 'foo/bb/aa/rr' '*/*/*'
ok 8 - git branch -d d/e/f should delete a branch and a log
ok 179 - pathmatch: match 'abcXdefXghi' '*X*i'
ok 6 - side: branch --merged
ok 180 - pathmatch: match 'ab/cXd/efXg/hi' '*/*X*/*/*i'
ok 181 - pathmatch: match 'ab/cXd/efXg/hi' '*Xg*i'
ok 7 - branch --merged with pattern implies --list
ok 182 - wildmatch: no match 'a' '[A-Z]'
ok 183 - wildmatch: match 'A' '[A-Z]'
ok 8 - side: branch --no-merged
ok 184 - wildmatch: no match 'A' '[a-z]'
ok 9 - git branch j/k should work after branch j has been deleted
ok 185 - wildmatch: match 'a' '[a-z]'
ok 186 - wildmatch: no match 'a' '[[:upper:]]'
ok 187 - wildmatch: match 'A' '[[:upper:]]'
ok 188 - wildmatch: no match 'A' '[[:lower:]]'
ok 9 - master: branch --merged
ok 189 - wildmatch: match 'a' '[[:lower:]]'
ok 190 - wildmatch: no match 'A' '[B-Za]'
ok 10 - git branch l should work after branch l/m has been deleted
ok 10 - master: branch --no-merged
ok 191 - wildmatch: match 'a' '[B-Za]'
ok 192 - wildmatch: no match 'A' '[B-a]'
ok 11 - git branch -m dumps usage
ok 193 - wildmatch: match 'a' '[B-a]'
ok 11 - branch --no-merged with pattern implies --list
ok 194 - wildmatch: no match 'z' '[Z-y]'
ok 195 - wildmatch: match 'Z' '[Z-y]'
ok 196 - iwildmatch: match 'a' '[A-Z]'
ok 27 - git checkout -f: removed submodule leaves submodule containing a .git directory alone
ok 12 - implicit --list conflicts with modification options
ok 12 - git branch -m m m/m should work
ok 197 - iwildmatch: match 'A' '[A-Z]'
# passed all 12 test(s)
1..12
ok 198 - iwildmatch: match 'A' '[a-z]'
ok 199 - iwildmatch: match 'a' '[a-z]'
ok 13 - git branch -m n/n n should work
ok 200 - iwildmatch: match 'a' '[[:upper:]]'
*** t3202-show-branch-octopus.sh ***
ok 201 - iwildmatch: match 'A' '[[:upper:]]'
ok 202 - iwildmatch: match 'A' '[[:lower:]]'
ok 203 - iwildmatch: match 'a' '[[:lower:]]'
ok 204 - iwildmatch: match 'A' '[B-Za]'
ok 205 - iwildmatch: match 'a' '[B-Za]'
ok 206 - iwildmatch: match 'A' '[B-a]'
ok 14 - git branch -m o/o o should fail when o/p exists
ok 207 - iwildmatch: match 'a' '[B-a]'
ok 208 - iwildmatch: match 'z' '[Z-y]'
ok 209 - iwildmatch: match 'Z' '[Z-y]'
# passed all 209 test(s)
1..209
ok 15 - git branch -m q r/q should fail when r exists
*** t3203-branch-output.sh ***
ok 16 - git branch -M foo bar should fail when bar is checked out
ok 17 - git branch -M baz bam should succeed when baz is checked out
ok 18 - git branch -M master should work when master is checked out
ok 1 - make commits
ok 19 - git branch -M master master should work when master is checked out
ok 2 - make branches
ok 20 - git branch -M master2 master2 should work when master is checked out
ok 3 - make remote branches
ok 4 - git branch shows local branches
ok 21 - git branch -v -d t should work
ok 5 - git branch --list shows local branches
ok 6 - git branch --list pattern shows matching local branches
ok 22 - git branch -v -m t s should work
ok 7 - git branch -r shows remote branches
ok 8 - git branch -a shows local and remote branches
ok 23 - git branch -m -d t s should fail
ok 9 - git branch -v shows branch summaries
ok 24 - git branch --list -d t should fail
ok 10 - git branch --list -v pattern shows branch summaries
ok 11 - git branch -v pattern does not show branch summaries
ok 25 - git branch --column
ok 12 - git branch shows detached HEAD properly
# passed all 12 test(s)
1..12
ok 26 - git branch --column with an extremely long branch name
*** t3210-pack-refs.sh ***
ok 27 - git branch with column.*
ok 28 - git branch --column -v should fail
ok 1 - setup
ok 29 - git branch -v with column.ui ignored
ok 1 - prepare a trivial repository
ok 2 - show-branch with more than 8 branches
ok 2 - see if git show-ref works as expected
ok 30 - git branch -m q q2 without config should succeed
ok 3 - see if a branch still exists when packed
not ok 28 - git checkout -f: replace submodule with a directory must fail # TODO known breakage
ok 4 - git branch c/d should barf if branch c exists
ok 3 - show-branch with showbranch.default
ok 31 - git branch -m s/s s should work when s/t is deleted
# passed all 3 test(s)
1..3
ok 32 - config information was renamed, too
*** t3211-peel-ref.sh ***
ok 5 - see if a branch still exists after git pack-refs --prune
ok 33 - deleting a symref
ok 6 - see if git pack-refs --prune remove ref files
ok 34 - deleting a dangling symref
ok 7 - see if git pack-refs --prune removes empty dirs
ok 35 - renaming a symref is not allowed
ok 36 - git branch -m u v should fail when the reflog for u is a symlink
ok 1 - create annotated tag in refs/tags
ok 8 - git branch g should work when git branch g/h has been deleted
ok 2 - create annotated tag outside of refs/tags
ok 9 - git branch i/j/k should barf if branch i exists
ok 3 - set up expected show-ref output
ok 4 - refs are peeled outside of refs/tags (loose)
ok 5 - refs are peeled outside of refs/tags (packed)
ok 10 - test git branch k after branch k/l/m and k/lm have been deleted
ok 37 - test tracking setup via --track
ok 6 - create old-style pack-refs without fully-peeled
ok 7 - refs are peeled outside of refs/tags (old packed)
ok 38 - test tracking setup (non-wildcard, matching)
ok 8 - peeled refs survive deletion of packed ref
# passed all 8 test(s)
1..8
ok 11 - test git branch n after some branch deletion and pruning
*** t3300-funny-names.sh ***
ok 12 - see if up-to-date packed refs are preserved
ok 39 - tracking setup fails on non-matching refspec
ok 13 - pack, prune and repack
ok 1 - setup
ok 2 - setup: populate index and tree
ok 40 - test tracking setup via config
ok 3 - ls-files prints space in filename verbatim
ok 4 - setup: add funny filename
ok 5 - ls-files quotes funny filename
ok 14 - explicit pack-refs with dangling packed reference
ok 6 - ls-files -z does not quote funny filename
ok 41 - test overriding tracking setup via --no-track
ok 7 - ls-tree quotes funny filename
ok 8 - diff-index --name-status quotes funny filename
ok 9 - diff-tree --name-status quotes funny filename
ok 42 - no tracking without .fetch entries
ok 10 - diff-index -z does not quote funny filename
ok 11 - diff-tree -z does not quote funny filename
ok 15 - delete ref with dangling packed version
ok 12 - diff-tree --find-copies-harder quotes funny filename
ok 43 - test tracking setup via --track but deeper
ok 13 - setup: remove unfunny index entry
not ok 29 - git checkout -f: replace submodule containing a .git directory with a directory must fail # TODO known breakage
ok 14 - diff-tree -M quotes funny filename
ok 44 - test deleting branch deletes branch config
ok 15 - diff-index -M -p quotes funny filename
ok 16 - setup: mode change
ok 17 - diff-index -M -p with mode change quotes funny filename
ok 45 - test deleting branch without config
ok 18 - diffstat for rename quotes funny filename
ok 16 - delete ref while another dangling packed ref
ok 46 - test --track without .fetch entries
ok 19 - numstat for rename quotes funny filename
ok 17 - pack ref directly below refs/
# passed all 17 test(s)
1..17
ok 47 - branch from non-branch HEAD w/autosetupmerge=always
ok 48 - branch from non-branch HEAD w/--track causes failure
ok 20 - numstat without -M quotes funny filename
*** t3301-notes.sh ***
ok 49 - branch from tag w/--track causes failure
ok 50 - --set-upstream-to fails on multiple branches
ok 21 - numstat for non-git rename diff quotes funny filename
# passed all 21 test(s)
1..21
*** t3302-notes-index-expensive.sh ***
ok 51 - --set-upstream-to fails on detached HEAD
ok 52 - --set-upstream-to fails on a missing dst branch
ok 53 - --set-upstream-to fails on a missing src branch
ok 1 - cannot annotate non-existing HEAD
ok 54 - --set-upstream-to fails on a non-ref
ok 2 - setup
ok 3 - need valid notes ref
ok 55 - use --set-upstream-to modify HEAD
ok 4 - refusing to add notes in refs/heads/
ok 5 - refusing to edit notes in refs/remotes/
ok 6 - handle empty notes gracefully
ok 7 - show non-existent notes entry with %N
ok 56 - use --set-upstream-to modify a particular branch
ok 57 - --unset-upstream should fail if given a non-existent branch
ok 1 - setup 10
ok 8 - create notes
ok 9 - show notes entry with %N
ok 2 - notes work
ok 3 # skip notes timing with /usr/bin/time (missing USR_BIN_TIME)
ok 58 - test --unset-upstream on HEAD
ok 10 - create reflog entry
ok 4 # skip setup 100 (missing EXPENSIVE)
ok 5 # skip notes work (missing EXPENSIVE)
ok 6 # skip notes timing with /usr/bin/time (missing EXPENSIVE,USR_BIN_TIME of USR_BIN_TIME,EXPENSIVE)
ok 7 # skip setup 1000 (missing EXPENSIVE)
ok 8 # skip notes work (missing EXPENSIVE)
ok 9 # skip notes timing with /usr/bin/time (missing EXPENSIVE,USR_BIN_TIME of USR_BIN_TIME,EXPENSIVE)
ok 10 # skip setup 10000 (missing EXPENSIVE)
ok 11 # skip notes work (missing EXPENSIVE)
ok 59 - --unset-upstream should fail on multiple branches
ok 12 # skip notes timing with /usr/bin/time (missing EXPENSIVE,USR_BIN_TIME of USR_BIN_TIME,EXPENSIVE)
# passed all 12 test(s)
1..12
*** t3303-notes-subtrees.sh ***
ok 60 - --unset-upstream should fail on detached HEAD
ok 11 - edit existing notes
ok 61 - test --unset-upstream on a particular branch
ok 12 - cannot "git notes add -m" where notes already exists
ok 62 - --set-upstream shows message when creating a new branch that exists as remote-tracking
ok 13 - can overwrite existing note with "git notes add -f -m"
ok 63 - --set-upstream with two args only shows the deprecation message
ok 64 - --set-upstream with one arg only shows the deprecation message if the branch existed
not ok 30 - git checkout -f: replace submodule with a file must fail # TODO known breakage
ok 65 - --set-upstream-to notices an error to set branch as own upstream
ok 14 - add w/no options on existing note morphs into edit
ok 66 - git checkout -b g/h/i -l should create a branch and a log
ok 67 - checkout -b makes reflog by default
ok 15 - can overwrite existing note with "git notes add -f"
ok 68 - checkout -b does not make reflog when core.logAllRefUpdates = false
ok 16 - show notes
ok 69 - checkout -b with -l makes reflog when core.logAllRefUpdates = false
ok 17 - create multi-line notes (setup)
ok 18 - show multi-line notes
ok 70 - avoid ambiguous track
ok 19 - create -F notes (setup)
ok 20 - show -F notes
ok 21 - Re-adding -F notes without -f fails
ok 22 - git log --pretty=raw does not show notes
ok 23 - git log --show-notes
ok 24 - git log --no-notes
ok 1 - setup: create 100 commits
ok 25 - git format-patch does not show notes
ok 26 - git format-patch --show-notes does show notes
ok 27 - git show does show notes
ok 71 - autosetuprebase local on a tracked local branch
ok 28 - git show --pretty does not show notes
ok 29 - git show --pretty=raw does not show notes
ok 30 - git show --pretty=short does not show notes
ok 31 - git show --pretty=medium does not show notes
ok 32 - git show --pretty=full does not show notes
ok 33 - git show --pretty=fuller does not show notes
ok 34 - git show --pretty=format:%s does not show notes
ok 35 - git show --oneline does not show notes
ok 36 - setup alternate notes ref
ok 37 - git log --notes shows default notes
ok 38 - git log --notes=X shows only X
ok 72 - autosetuprebase always on a tracked local branch
ok 39 - git log --notes --notes=X shows both
ok 40 - git log --no-notes resets default state
ok 41 - git log --no-notes resets ref list
not ok 31 - git checkout -f: replace submodule containing a .git directory with a file must fail # TODO known breakage
ok 42 - create -m notes (setup)
ok 43 - show -m notes
ok 44 - remove note with add -f -F /dev/null (setup)
ok 45 - verify note removal with -F /dev/null
ok 46 - do not create empty note with -m "" (setup)
ok 47 - verify non-creation of note with -m ""
ok 73 - autosetuprebase remote on a tracked local branch
ok 48 - create note with combination of -m and -F
ok 49 - remove note with "git notes remove" (setup)
ok 50 - verify note removal with "git notes remove"
ok 51 - removing non-existing note should not create new commit
ok 52 - removing more than one
ok 74 - autosetuprebase never on a tracked local branch
ok 53 - removing is atomic
ok 54 - removing with --ignore-missing
ok 75 - autosetuprebase local on a tracked remote branch
ok 55 - removing with --ignore-missing but bogus ref
ok 76 - autosetuprebase never on a tracked remote branch
ok 56 - remove reads from --stdin
ok 57 - remove --stdin is also atomic
ok 77 - autosetuprebase remote on a tracked remote branch
ok 58 - removing with --stdin --ignore-missing
ok 59 - list notes with "git notes list"
ok 60 - list notes with "git notes"
ok 78 - autosetuprebase always on a tracked remote branch
ok 61 - list specific note with "git notes list <object>"
ok 62 - listing non-existing notes fails
ok 79 - autosetuprebase unconfigured on a tracked remote branch
ok 63 - append to existing note with "git notes append"
ok 64 - "git notes list" does not expand to "git notes list HEAD"
ok 2 - test notes in 2/38-fanout
ok 65 - appending empty string does not change existing note
ok 3 - verify notes in 2/38-fanout
ok 66 - git notes append == add when there is no existing note
ok 32 - git checkout -f: modified submodule does not update submodule work tree
ok 67 - appending empty string to non-existing note does not create note
ok 68 - create other note on a different notes ref (setup)
ok 69 - Do not show note on other ref by default
ok 80 - autosetuprebase unconfigured on a tracked local branch
ok 70 - Do show note when ref is given in GIT_NOTES_REF
ok 71 - Do show note when ref is given in core.notesRef config
ok 72 - Do not show note when core.notesRef is overridden
ok 81 - autosetuprebase unconfigured on untracked local branch
ok 73 - Show all notes when notes.displayRef=refs/notes/*
ok 74 - core.notesRef is implicitly in notes.displayRef
ok 82 - autosetuprebase unconfigured on untracked remote branch
ok 75 - notes.displayRef can be given more than once
ok 76 - notes.displayRef respects order
ok 83 - autosetuprebase never on an untracked local branch
ok 77 - GIT_NOTES_DISPLAY_REF works
ok 78 - GIT_NOTES_DISPLAY_REF overrides config
ok 79 - --show-notes=* adds to GIT_NOTES_DISPLAY_REF
ok 80 - --no-standard-notes
ok 81 - --standard-notes
ok 84 - autosetuprebase local on an untracked local branch
ok 82 - --show-notes=ref accumulates
ok 85 - autosetuprebase remote on an untracked local branch
ok 83 - Allow notes on non-commits (trees, blobs, tags)
ok 86 - autosetuprebase always on an untracked local branch
ok 84 - create note from other note with "git notes add -C"
ok 87 - autosetuprebase never on an untracked remote branch
ok 85 - create note from non-existing note with "git notes add -C" fails
ok 86 - create note from non-blob with "git notes add -C" fails
ok 88 - autosetuprebase local on an untracked remote branch
ok 87 - create note from blob with "git notes add -C" reuses blob id
ok 89 - autosetuprebase remote on an untracked remote branch
ok 88 - create note from other note with "git notes add -c"
ok 89 - create note from non-existing note with "git notes add -c" fails
ok 90 - autosetuprebase always on an untracked remote branch
ok 90 - append to note from other note with "git notes append -C"
ok 33 - git checkout -f: modified submodule does not update submodule work tree to invalid commit
ok 91 - autosetuprebase always on detached HEAD
ok 91 - create note from other note with "git notes append -c"
ok 92 - detect misconfigured autosetuprebase (bad value)
ok 4 - test notes in 2/2/36-fanout
ok 93 - detect misconfigured autosetuprebase (no value)
ok 92 - append to note from other note with "git notes append -c"
ok 5 - verify notes in 2/2/36-fanout
ok 94 - attempt to delete a branch without base and unmerged to HEAD
ok 95 - attempt to delete a branch merged to its base
ok 93 - copy note with "git notes copy"
ok 94 - prevent overwrite with "git notes copy"
ok 96 - attempt to delete a branch merged to its base
ok 95 - allow overwrite with "git notes copy -f"
ok 96 - cannot copy note from object without notes
ok 97 - git notes copy --stdin
ok 97 - use set-upstream on the current branch
ok 98 - use --edit-description
ok 99 - detect typo in branch name when using --edit-description
ok 98 - git notes copy --for-rewrite (unconfigured)
ok 100 - refuse --edit-description on unborn branch for now
ok 101 - --merged catches invalid object names
ok 99 - git notes copy --for-rewrite (enabled)
ok 100 - git notes copy --for-rewrite (disabled)
ok 34 - git checkout -f: modified submodule does not update submodule work tree from invalid commit
# still have 6 known breakage(s)
# passed all remaining 28 test(s)
1..34
ok 101 - git notes copy --for-rewrite (overwrite)
ok 102 - git notes copy --for-rewrite (ignore)
*** t3304-notes-mixed.sh ***
ok 103 - git notes copy --for-rewrite (append)
ok 104 - git notes copy --for-rewrite (append two to one)
ok 1 - setup: create a couple of commits
ok 105 - git notes copy --for-rewrite (append empty)
ok 106 - GIT_NOTES_REWRITE_MODE works
ok 102 - tracking with unexpected .fetch refspec
# passed all 102 test(s)
1..102
ok 2 - create a notes tree with both notes and non-notes
ok 3 - verify contents of notes
ok 107 - GIT_NOTES_REWRITE_REF works
ok 4 - verify contents of non-notes
ok 108 - GIT_NOTES_REWRITE_REF overrides config
ok 5 - git-notes preserves non-notes
ok 109 - git notes copy diagnoses too many or too few parameters
ok 6 - test notes in 2/2/2/34-fanout
*** t3305-notes-fanout.sh ***
ok 110 - git notes get-ref (no overrides)
ok 6 - verify contents of non-notes after git-notes
ok 111 - git notes get-ref (core.notesRef)
# passed all 6 test(s)
1..6
ok 112 - git notes get-ref (GIT_NOTES_REF)
ok 113 - git notes get-ref (--ref)
ok 7 - verify notes in 2/2/2/34-fanout
# passed all 113 test(s)
1..113
*** t3306-notes-prune.sh ***
*** t3307-notes-man.sh ***
ok 1 - setup: create a few commits with notes
ok 2 - verify commits and notes
ok 1 - setup
ok 2 - example 1: notes to add an Acked-by line
ok 3 - example 2: binary notes
# passed all 3 test(s)
1..3
*** t3308-notes-merge.sh ***
ok 3 - remove some commits
ok 4 - verify that commits are gone
ok 5 - verify that notes are still present
ok 6 - prune -n does not remove notes
ok 7 - prune -n lists prunable notes
ok 8 - prune notes
ok 9 - verify that notes are gone
ok 1 - setup
ok 10 - remove some commits
ok 11 - prune -v notes
ok 2 - verify initial notes (x)
ok 3 - fail to merge empty notes ref into empty notes ref (z => y)
ok 12 - verify that notes are gone
# passed all 12 test(s)
1..12
*** t3309-notes-merge-auto-resolve.sh ***
ok 4 - fail to merge into various non-notes refs
ok 5 - fail to merge various non-note-trees
ok 6 - merge notes into empty notes ref (x => y)
ok 7 - merge empty notes ref (z => y)
ok 8 - change notes on other notes ref (y)
ok 9 - merge previous notes commit (y^ => y) => No-op
ok 10 - verify changed notes on other notes ref (y)
ok 11 - verify unchanged notes on original notes ref (x)
ok 12 - merge original notes (x) into changed notes (y) => No-op
ok 13 - merge changed (y) into original (x) => Fast-forward
ok 1 - setup commits
ok 14 - merge empty notes ref (z => y)
ok 8 - test same notes in no fanout and 2/38-fanout
ok 15 - change notes on other notes ref (y)
ok 9 - verify same notes in no fanout and 2/38-fanout
ok 16 - change notes on notes ref (x)
ok 2 - setup merge base (x)
ok 17 - merge y into x => Non-conflicting 3-way merge
ok 3 - verify state of merge base (x)
ok 18 - create notes on new, separate notes ref (w)
ok 4 - setup local branch (y)
ok 19 - merge w into x => Non-conflicting history-less merge
# passed all 19 test(s)
1..19
ok 5 - verify state of local branch (y)
*** t3310-notes-merge-manual-resolve.sh ***
ok 6 - setup remote branch (z)
ok 7 - verify state of remote branch (z)
ok 8 - merge z into y with invalid strategy => Fail/No changes
ok 9 - merge z into y with "ours" strategy => Non-conflicting 3-way merge
ok 1 - setup commits
ok 10 - reset to pre-merge state (y)
ok 11 - merge z into y with "theirs" strategy => Non-conflicting 3-way merge
ok 2 - setup merge base (x)
ok 12 - reset to pre-merge state (y)
ok 13 - merge z into y with "union" strategy => Non-conflicting 3-way merge
ok 14 - reset to pre-merge state (y)
ok 3 - setup local branch (y)
ok 15 - merge y into z with "union" strategy => Non-conflicting 3-way merge
ok 16 - reset to pre-merge state (z)
ok 4 - setup remote branch (z)
ok 17 - merge y into z with "cat_sort_uniq" strategy => Non-conflicting 3-way merge
# passed all 17 test(s)
1..17
*** t3311-notes-merge-fanout.sh ***
ok 5 - merge z into m (== y) with default ("manual") resolver => Conflicting 3-way merge
ok 6 - change notes in z
ok 7 - cannot do merge w/conflicts when previous merge is unfinished
ok 8 - setup unrelated notes ref (w)
ok 9 - can do merge without conflicts even if previous merge is unfinished (x => w)
ok 1 - setup a few initial commits with notes (notes ref: x)
ok 10 - test same notes in no fanout and 2/2/36-fanout
ok 11 - verify same notes in no fanout and 2/2/36-fanout
ok 2 - sanity check (x)
ok 10 - finalize conflicting merge (z => m)
ok 11 - redo merge of z into m (== y) with default ("manual") resolver => Conflicting 3-way merge
ok 12 - abort notes merge
ok 13 - redo merge of z into m (== y) with default ("manual") resolver => Conflicting 3-way merge
ok 14 - add + remove notes in finalized merge (z => m)
ok 15 - redo merge of z into m (== y) with default ("manual") resolver => Conflicting 3-way merge
ok 16 - reset notes ref m to somewhere else (w)
ok 17 - fail to finalize conflicting merge if underlying ref has moved in the meantime (m != NOTES_MERGE_PARTIAL^1)
ok 18 - resolve situation by aborting the notes merge
ok 19 - switch cwd before committing notes merge
# passed all 19 test(s)
1..19
ok 12 - test same notes in 2/38-fanout and 2/2/36-fanout
*** t3400-rebase.sh ***
ok 13 - verify same notes in 2/38-fanout and 2/2/36-fanout
ok 1 - prepare repository with topic branches
ok 2 - rebase on dirty worktree
ok 3 - rebase on dirty cache
ok 4 - rebase against master
ok 5 - rebase, with <onto> and <upstream> specified as :/quuxery
ok 14 - test same notes in 2/2/2/34-fanout and 2/2/36-fanout
ok 6 - the rebase operation should not have destroyed author information
ok 7 - the rebase operation should not have destroyed author information (2)
ok 15 - verify same notes in 2/2/2/34-fanout and 2/2/36-fanout
ok 8 - HEAD was detached during rebase
ok 9 - rebase from ambiguous branch name
ok 10 - rebase off of the previous branch using "-"
ok 11 - rebase a single mode change
ok 16 - test notes in no fanout concatenated with 2/38-fanout
ok 17 - verify notes in no fanout concatenated with 2/38-fanout
ok 12 - rebase is not broken by diff.renames
ok 13 - setup: recover
ok 14 - Show verbose error when HEAD could not be detached
ok 15 - fail when upstream arg is missing and not on branch
ok 16 - fail when upstream arg is missing and not configured
ok 18 - test notes in no fanout concatenated with 2/2/36-fanout
ok 17 - default to common base in @{upstream}s reflog if no upstream arg
ok 19 - verify notes in no fanout concatenated with 2/2/36-fanout
ok 18 - cherry-picked commits and fork-point work together
ok 19 - rebase -q is quiet
ok 20 - test notes in 2/38-fanout concatenated with 2/2/36-fanout
ok 21 - verify notes in 2/38-fanout concatenated with 2/2/36-fanout
ok 20 - Rebase a commit that sprinkles CRs in
ok 21 - rebase can copy notes
ok 22 - rebase -m can copy notes
ok 1 - creating many notes with git-notes
ok 2 - many notes created correctly with git-notes
ok 3 - many notes created with git-notes triggers fanout
ok 23 - rebase commit with an ancient timestamp
# passed all 23 test(s)
1..23
*** t3402-rebase-merge.sh ***
ok 22 - test notes in 2/2/36-fanout concatenated with 2/2/2/34-fanout
ok 23 - verify notes in 2/2/36-fanout concatenated with 2/2/2/34-fanout
# passed all 23 test(s)
1..23
ok 1 - setup
*** t3403-rebase-skip.sh ***
ok 2 - reference merge
ok 1 - setup
ok 3 - rebase
ok 4 - test-rebase@{1} is pre rebase
ok 5 - merge and rebase should match
ok 2 - rebase with git am -3 (default)
ok 6 - rebase the other way
ok 3 - rebase --skip can not be used with other options
ok 7 - rebase -Xtheirs
ok 8 - merge and rebase should match
ok 4 - rebase --skip with am -3
ok 9 - picking rebase
ok 10 - rebase -s funny -Xopt
ok 5 - rebase moves back to skip-reference
ok 6 - checkout skip-merge
ok 7 - rebase with --merge
ok 11 - rebase --skip works with two conflicts in a row
# passed all 11 test(s)
1..11
*** t3404-rebase-interactive.sh ***
ok 8 - rebase --skip with --merge
ok 9 - merge and reference trees equal
ok 10 - moved back to branch correctly
# passed all 10 test(s)
1..10
*** t3405-rebase-malformed.sh ***
ok 1 - setup
ok 4 - deleting most notes with git-notes
ok 5 - most notes deleted correctly with git-notes
ok 6 - deleting most notes triggers fanout consolidation
# passed all 6 test(s)
1..6
ok 1 - setup
ok 2 - rebase commit with multi-line subject
*** t3406-rebase-message.sh ***
ok 2 - rebase --keep-empty
ok 3 - rebase commit with diff in message
# passed all 3 test(s)
1..3
*** t3407-rebase-abort.sh ***
ok 1 - setup
ok 1 - setup
ok 2 - rebase -m
ok 3 - rebase against master twice
ok 2 - rebase --abort
ok 4 - rebase against master twice with --force
ok 3 - rebase -i with the exec command
ok 5 - rebase against master twice from another branch
ok 6 - rebase fast-forward to master
ok 4 - rebase -i with the exec command runs from tree root
ok 7 - rebase --stat
ok 3 - rebase --abort after --skip
ok 8 - rebase w/config rebase.stat
ok 5 - rebase -i with the exec command checks tree cleanness
ok 9 - rebase -n overrides config rebase.stat config
ok 10 - rebase --onto outputs the invalid ref
# passed all 10 test(s)
1..10
*** t3408-rebase-multi-line.sh ***
ok 6 - rebase -i with exec of inexistent command
ok 4 - rebase --abort after --continue
ok 1 - setup
ok 7 - no changes are a nop
ok 2 - rebase
# passed all 2 test(s)
1..2
*** t3409-rebase-preserve-merges.sh ***
ok 5 - rebase --abort does not update reflog
ok 8 - test the [branch] option
ok 3 - Add a few hundred commits w/notes to trigger fanout (x -> y)
ok 4 - notes tree has fanout (y)
ok 5 - No-op merge (already included) (x => y)
ok 6 - Fast-forward merge (y => x)
ok 1 - setup for merge-preserving rebase
ok 7 - change some of the initial 5 notes (x -> z)
ok 8 - notes tree has no fanout (z)
ok 9 - successful merge without conflicts (y => z)
ok 6 - rebase --abort can not be used with other options
ok 10 - notes tree still has fanout after merge (m)
ok 11 - introduce conflicting changes (y -> w)
ok 12 - successful merge using "ours" strategy (z => w)
ok 7 - rebase --merge --abort
ok 13 - notes tree still has fanout after merge (m)
ok 9 - test --onto <branch>
ok 14 - successful merge using "theirs" strategy (z => w)
ok 15 - notes tree still has fanout after merge (m)
ok 16 - successful merge using "union" strategy (z => w)
ok 17 - notes tree still has fanout after merge (m)
ok 8 - rebase --merge --abort after --skip
ok 18 - successful merge using "cat_sort_uniq" strategy (z => w)
ok 19 - notes tree still has fanout after merge (m)
ok 20 - fails to merge using "manual" strategy (z => w)
ok 21 - notes tree still has fanout after merge (m)
ok 22 - verify conflict entries (with no fanout)
ok 9 - rebase --merge --abort after --continue
ok 23 - resolve and finalize merge (z => w)
ok 2 - --continue works after a conflict
ok 24 - notes tree still has fanout after merge (m)
# passed all 24 test(s)
1..24
ok 10 - rebase on top of a non-conflicting commit
ok 11 - reflog for the branch shows state before rebase
ok 10 - rebase --merge --abort does not update reflog
*** t3410-rebase-preserve-dropped-merges.sh ***
ok 11 - rebase --abort can not be used with other options
# passed all 11 test(s)
1..11
*** t3411-rebase-preserve-around-merges.sh ***
ok 12 - exchange two commits
ok 1 - setup
ok 1 - setup
ok 3 - rebase -p preserves no-ff merges
ok 13 - stop on conflicting pick
ok 14 - abort
ok 2 - squash F1 into D1
ok 15 - abort with error when new base cannot be checked out
ok 2 - skip same-resolution merges with -p
ok 4 - rebase -p ignores merge.log config
# passed all 4 test(s)
1..4
*** t3412-rebase-root.sh ***
ok 1 - prepare repository
ok 2 - rebase --root fails with too many args
ok 3 - setup pre-rebase hook
ok 16 - retain authorship
ok 4 - rebase --root --onto <newbase>
ok 5 - pre-rebase got correct input (1)
ok 17 - squash
ok 18 - retain authorship when squashing
ok 6 - rebase --root --onto <newbase> <branch>
ok 7 - pre-rebase got correct input (2)
ok 3 - keep different-resolution merges with -p
# passed all 3 test(s)
1..3
*** t3413-rebase-hook.sh ***
ok 1 - setup
ok 3 - rebase two levels of merge
# passed all 3 test(s)
1..3
*** t3414-rebase-preserve-onto.sh ***
ok 19 - -p handles "no changes" gracefully
ok 8 - rebase -i --root --onto <newbase>
ok 9 - pre-rebase got correct input (3)
ok 2 - rebase
ok 1 - setup
not ok 20 - exchange two commits with -p # TODO known breakage
ok 3 - rebase -i
ok 4 - setup pre-rebase hook
ok 10 - rebase -i --root --onto <newbase> <branch>
ok 11 - pre-rebase got correct input (4)
ok 5 - pre-rebase hook gets correct input (1)
ok 6 - pre-rebase hook gets correct input (2)
ok 2 - rebase from B1 onto H1
ok 12 - rebase -i -p with linear history
ok 13 - pre-rebase got correct input (5)
ok 7 - pre-rebase hook gets correct input (3)
ok 14 - set up merge history
ok 21 - preserve merges with -p
ok 8 - pre-rebase hook gets correct input (4)
ok 3 - rebase from E1 onto H1
ok 15 - rebase -i -p with merge
ok 16 - set up second root and merge
ok 9 - pre-rebase hook gets correct input (5)
ok 22 - edit ancestor with -p
ok 4 - rebase from C1 onto H1
# passed all 4 test(s)
1..4
*** t3415-rebase-autosquash.sh ***
ok 1 - setup
ok 10 - pre-rebase hook gets correct input (6)
ok 11 - setup pre-rebase hook that fails
ok 12 - pre-rebase hook stops rebase (1)
ok 13 - pre-rebase hook stops rebase (2)
ok 23 - --continue tries to commit
ok 14 - rebase --no-verify overrides pre-rebase (1)
ok 2 - auto fixup (option)
ok 17 - rebase -i -p with two roots
ok 18 - setup pre-rebase hook that fails
ok 19 - pre-rebase hook stops rebase
ok 20 - pre-rebase hook stops rebase -i
ok 21 - remove pre-rebase hook
ok 22 - set up a conflict
ok 24 - verbose flag is heeded, even after --continue
ok 15 - rebase --no-verify overrides pre-rebase (2)
# passed all 15 test(s)
1..15
*** t3416-rebase-onto-threedots.sh ***
ok 23 - rebase --root with conflict (first part)
ok 24 - fix the conflict
ok 1 - setup
ok 25 - rebase --root with conflict (second part)
ok 25 - multi-squash only fires up editor once
ok 2 - rebase --onto master...topic
ok 26 - rebase -i --root with conflict (first part)
ok 27 - fix the conflict
ok 3 - auto fixup (config)
ok 3 - rebase --onto master...
ok 4 - rebase --onto master...side
ok 26 - multi-fixup does not fire up editor
ok 28 - rebase -i --root with conflict (second part)
ok 4 - auto squash (option)
ok 5 - rebase -i --onto master...topic
ok 27 - commit message used after conflict
ok 29 - rebase -i -p --root with conflict (first part)
ok 30 - fix the conflict
ok 6 - rebase -i --onto master...
ok 28 - commit message retained after conflict
ok 7 - rebase -i --onto master...side
# passed all 7 test(s)
1..7
*** t3417-rebase-whitespace-fix.sh ***
ok 1 - blank line at end of file; extend at end of file
ok 31 - rebase -i -p --root with conflict (second part)
# passed all 31 test(s)
1..31
ok 29 - squash and fixup generate correct log messages
*** t3418-rebase-continue.sh ***
ok 5 - auto squash (config)
ok 1 - setup
ok 2 - two blanks line at end of file; extend at end of file
ok 6 - misspelled auto squash
ok 2 - interactive rebase --continue works with touched file
ok 30 - squash ignores comments
ok 3 - same, but do not remove trailing spaces
ok 4 - at beginning of file
# passed all 4 test(s)
1..4
ok 3 - non-interactive rebase --continue works with touched file
*** t3419-rebase-patch-id.sh ***
ok 1 - setup
ok 4 - rebase --continue can not be used with other options
ok 2 - setup: 500 lines
ok 3 - setup attributes
ok 7 - auto squash that matches 2 commits
ok 31 - squash ignores blank lines
ok 5 - rebase --continue remembers merge strategy and options
ok 4 - detect upstream patch
ok 8 - auto squash that matches a commit after the squash
ok 32 - squash works as expected
ok 5 - do not drop patch
ok 6 # skip setup: 50000 lines (missing EXPENSIVE)
ok 7 # skip setup attributes (missing EXPENSIVE)
ok 8 # skip detect upstream patch (missing EXPENSIVE)
ok 9 # skip do not drop patch (missing EXPENSIVE)
# passed all 9 test(s)
1..9
*** t3420-rebase-autostash.sh ***
ok 1 - setup
ok 6 - rebase --continue remembers --rerere-autoupdate
# passed all 6 test(s)
1..6
*** t3421-rebase-topology-linear.sh ***
ok 1 - setup
ok 9 - auto squash that matches a sha1
ok 2 - rebase: fast-forward rebase
ok 33 - interrupted squash works as expected
ok 2 - simple rebase
ok 3 - rebase: noop rebase
ok 3 - simple rebase -m
ok 10 - auto squash that matches longer sha1
ok 34 - interrupted squash works as expected (case 2)
ok 4 - rebase: dirty worktree, non-conflicting rebase
ok 4 - simple rebase -i
ok 35 - --continue tries to commit, even for "edit"
ok 11 - use commit --fixup
ok 5 - rebase: dirty index, non-conflicting rebase
ok 36 - aborted --continue does not squash commits after "edit"
ok 6 - rebase: conflicting rebase
ok 5 - simple rebase -p
ok 37 - auto-amend only edited commits after "edit"
ok 12 - use commit --squash
ok 6 - rebase is no-op if upstream is an ancestor
ok 7 - rebase -m is no-op if upstream is an ancestor
ok 38 - clean error after failed "exec"
ok 7 - rebase: --continue
ok 8 - rebase -i is no-op if upstream is an ancestor
ok 39 - rebase a detached HEAD
ok 40 - rebase a commit violating pre-commit
ok 13 - fixup! fixup!
ok 9 - rebase -p is no-op if upstream is an ancestor
ok 8 - rebase: --skip
ok 41 - rebase with a file named HEAD in worktree
ok 10 - rebase -f rewrites even if upstream is an ancestor
ok 9 - rebase: --abort
ok 11 - rebase -m -f rewrites even if upstream is an ancestor
ok 42 - do "noop" when there is nothing to cherry-pick
ok 43 - submodule rebase setup
ok 14 - fixup! squash!
ok 10 - rebase: non-conflicting rebase, conflicting stash
ok 44 - submodule rebase -i
ok 12 - rebase -i -f rewrites even if upstream is an ancestor
ok 45 - submodule conflict setup
ok 11 - rebase --merge: dirty worktree, non-conflicting rebase
ok 46 - rebase -i continue with only submodule staged
not ok 13 - rebase -p -f rewrites even if upstream is an ancestor # TODO known breakage
ok 15 - squash! squash!
ok 12 - rebase --merge: dirty index, non-conflicting rebase
ok 14 - rebase fast-forwards from ancestor of upstream
ok 15 - rebase -m fast-forwards from ancestor of upstream
ok 13 - rebase --merge: conflicting rebase
ok 47 - rebase -i continue with unstaged submodule
ok 16 - rebase -i fast-forwards from ancestor of upstream
ok 14 - rebase --merge: --continue
ok 48 - avoid unnecessary reset
ok 16 - squash! fixup!
# passed all 16 test(s)
1..16
*** t3425-rebase-topology-merges.sh ***
ok 15 - rebase --merge: --skip
ok 17 - rebase -p fast-forwards from ancestor of upstream
ok 18 - setup of linear history for range selection tests
ok 1 - setup of non-linear-history
ok 16 - rebase --merge: --abort
ok 19 - rebase drops patches in upstream
ok 2 - rebase after merge from upstream
not ok 20 - rebase -m drops patches in upstream # TODO known breakage
ok 3 - rebase -m after merge from upstream
ok 17 - rebase --merge: non-conflicting rebase, conflicting stash
ok 49 - reword
ok 21 - rebase -i drops patches in upstream
ok 4 - rebase -i after merge from upstream
ok 18 - rebase --interactive: dirty worktree, non-conflicting rebase
ok 50 - rebase -i can copy notes
ok 5 - rebase of non-linear history is linearized in place
ok 51 - rebase -i can copy notes over a fixup
ok 6 - rebase -m of non-linear history is linearized in place
ok 22 - rebase -p drops patches in upstream
ok 23 - rebase can drop last patch if in upstream
ok 52 - rebase while detaching HEAD
ok 19 - rebase --interactive: dirty index, non-conflicting rebase
not ok 24 - rebase -m can drop last patch if in upstream # TODO known breakage
ok 7 - rebase -i of non-linear history is linearized in place
ok 20 - rebase --interactive: conflicting rebase
ok 8 - rebase of non-linear history is linearized upstream
ok 25 - rebase -i can drop last patch if in upstream
ok 53 - always cherry-pick with --no-ff
ok 54 - set up commits with funny messages
ok 9 - rebase -m of non-linear history is linearized upstream
ok 55 - rebase-i history with funny messages
ok 56 - prepare for rebase -i --exec
ok 26 - rebase -p can drop last patch if in upstream
ok 21 - rebase --interactive: --continue
ok 27 - rebase --onto drops patches in upstream
ok 10 - rebase -i of non-linear history is linearized upstream
not ok 28 - rebase -m --onto drops patches in upstream # TODO known breakage
ok 57 - running "git rebase -i --exec git show HEAD"
ok 22 - rebase --interactive: --skip
ok 11 - rebase of non-linear history with merges after upstream merge is linearized
ok 12 - rebase -m of non-linear history with merges after upstream merge is linearized
ok 29 - rebase -i --onto drops patches in upstream
ok 23 - rebase --interactive: --abort
ok 58 - running "git rebase --exec git show HEAD -i"
ok 13 - rebase -i of non-linear history with merges after upstream merge is linearized
ok 30 - rebase -p --onto drops patches in upstream
ok 24 - rebase --interactive: non-conflicting rebase, conflicting stash
ok 31 - rebase --onto does not drop patches in onto
ok 59 - running "git rebase -ix git show HEAD"
ok 32 - rebase -m --onto does not drop patches in onto
ok 25 - abort rebase -i with --autostash
# passed all 25 test(s)
1..25
*** t3426-rebase-submodule.sh ***
ok 14 - rebase -p is no-op in non-linear history
ok 33 - rebase -i --onto does not drop patches in onto
ok 15 - rebase -p is no-op when base inside second parent
ok 60 - rebase -ix with several <CMD>
ok 1 - git_rebase: added submodule creates empty directory
ok 34 - rebase -p --onto does not drop patches in onto
ok 35 - setup of linear history for empty commit tests
ok 61 - rebase -ix with several instances of --exec
ok 36 - rebase drops empty commit
not ok 16 - rebase -p --root on non-linear history is a no-op # TODO known breakage
ok 2 - git_rebase: added submodule leaves existing empty directory alone
ok 37 - rebase -m drops empty commit
ok 3 - git_rebase: added submodule doesn't remove untracked unignored file with same name
ok 17 - rebase -p re-creates merge from side branch
ok 38 - rebase -i drops empty commit
ok 4 - git_rebase: replace tracked file with submodule creates empty directory
ok 62 - rebase -ix with --autosquash
ok 63 - rebase --exec without -i shows error message
ok 64 - rebase -i --exec without <CMD>
ok 39 - rebase -p drops empty commit
ok 5 - git_rebase: replace directory with submodule
ok 18 - rebase -p re-creates internal merge
ok 40 - rebase --keep-empty
ok 65 - rebase -i --root re-order and drop commits
not ok 41 - rebase -m --keep-empty # TODO known breakage
ok 66 - rebase -i --root retain root commit author and message
ok 6 - git_rebase: removed submodule leaves submodule directory and its contents in place
ok 67 - rebase -i --root temporary sentinel commit
ok 19 - rebase -p can re-create two branches on onto
ok 20 - setup of non-linear-history for patch-equivalence tests
ok 42 - rebase -i --keep-empty
ok 68 - rebase -i --root fixup root commit
ok 7 - git_rebase: removed submodule leaves submodule containing a .git directory alone
not ok 43 - rebase -p --keep-empty # TODO known breakage
ok 69 - rebase --edit-todo does not works on non-interactive rebase
ok 44 - rebase --keep-empty keeps empty even if already in upstream
not ok 45 - rebase -m --keep-empty keeps empty even if already in upstream # TODO known breakage
ok 8 - git_rebase: replace submodule with a directory must fail
ok 21 - rebase -p re-creates history around dropped commit matching upstream
ok 70 - rebase --edit-todo can be used to modify todo
ok 9 - git_rebase: replace submodule containing a .git directory with a directory must fail
not ok 46 - rebase -i --keep-empty keeps empty even if already in upstream # TODO known breakage
ok 71 - rebase -i produces readable reflog
ok 72 - rebase -i respects core.commentchar
ok 22 - rebase -p --onto in merged history drops patches in upstream
not ok 10 - git_rebase: replace submodule with a file must fail # TODO known breakage
not ok 47 - rebase -p --keep-empty keeps empty even if already in upstream # TODO known breakage
ok 48 - setup of linear history for test involving root
ok 73 - rebase -i, with <onto> and <upstream> specified as :/quuxery
ok 49 - rebase --onto --root
not ok 50 - rebase -m --onto --root # TODO known breakage
not ok 11 - git_rebase: replace submodule containing a .git directory with a file must fail # TODO known breakage
ok 74 - rebase -i with --strategy and -X
ok 23 - rebase -p --onto in merged history does not drop patches in onto
ok 24 - setup of non-linear-history for dropping whole side
ok 51 - rebase -i --onto --root
ok 75 - rebase -i error on commits with \ in message
ok 76 - short SHA-1 setup
ok 12 - git_rebase: modified submodule does not update submodule work tree
ok 77 - short SHA-1 collide
# still have 1 known breakage(s)
# passed all remaining 76 test(s)
1..77
*** t3500-cherry.sh ***
ok 52 - rebase -p --onto --root
not ok 25 - rebase -p drops merge commit when entire first-parent side is dropped # TODO known breakage
ok 1 - prepare repository with topic branch, and check cherry finds the 2 patches from there
ok 2 - check that cherry with limit returns only the top patch
ok 3 - cherry-pick one of the 2 patches, and check cherry recognized one and only one as new
# passed all 3 test(s)
1..3
*** t3501-revert-cherry-pick.sh ***
ok 1 - setup
ok 2 - cherry-pick --nonsense
ok 3 - revert --nonsense
ok 4 - cherry-pick after renaming branch
ok 53 - rebase without --onto --root with disjoint history
ok 5 - revert after renaming branch
ok 13 - git_rebase: modified submodule does not update submodule work tree to invalid commit
ok 6 - cherry-pick on stat-dirty working tree
ok 7 - revert forbidden on dirty working tree
ok 8 - cherry-pick on unborn branch
not ok 54 - rebase -m without --onto --root with disjoint history # TODO known breakage
ok 9 - cherry-pick "-" to pick from previous branch
ok 10 - cherry-pick "-" is meaningless without checkout
ok 11 - cherry-pick "-" works with arguments
# passed all 11 test(s)
1..11
*** t3502-cherry-pick-merge.sh ***
ok 26 - rebase -p drops merge commit when entire second-parent side is dropped
ok 1 - setup
ok 2 - cherry-pick a non-merge with -m should fail
ok 27 - setup of non-linear-history for empty commits
ok 3 - cherry pick a merge without -m should fail
ok 4 - cherry pick a merge (1)
ok 5 - cherry pick a merge (2)
ok 6 - cherry pick a merge relative to nonexistent parent should fail
ok 7 - revert a non-merge with -m should fail
ok 8 - revert a merge without -m should fail
ok 9 - revert a merge (1)
ok 10 - revert a merge (2)
ok 14 - git_rebase: modified submodule does not update submodule work tree from invalid commit
ok 11 - revert a merge relative to nonexistent parent should fail
# passed all 11 test(s)
1..11
*** t3503-cherry-pick-root.sh ***
ok 55 - rebase -i without --onto --root with disjoint history
ok 1 - setup
ok 2 - cherry-pick a root commit
ok 3 - revert a root commit
ok 4 - cherry-pick a root commit with an external strategy
ok 5 - revert a root commit with an external strategy
ok 6 - cherry-pick two root commits
# passed all 6 test(s)
1..6
*** t3504-cherry-pick-rerere.sh ***
ok 1 - setup
ok 2 - conflicting merge
ok 3 - fixup
ok 4 - cherry-pick conflict
ok 5 - reconfigure
ok 6 - cherry-pick conflict without rerere
# passed all 6 test(s)
1..6
*** t3505-cherry-pick-empty.sh ***
ok 1 - setup
ok 2 - cherry-pick an empty commit
ok 3 - index lockfile was removed
ok 4 - cherry-pick a commit with an empty message
ok 5 - index lockfile was removed
ok 6 - cherry-pick a commit with an empty message with --allow-empty-message
not ok 56 - rebase -p without --onto --root with disjoint history # TODO known breakage
ok 7 - cherry pick an empty non-ff commit without --allow-empty
ok 8 - cherry pick an empty non-ff commit with --allow-empty
ok 9 - cherry pick with --keep-redundant-commits
ok 10 - cherry-pick a commit that becomes no-op (prep)
ok 28 - rebase -p re-creates empty internal merge commit
ok 11 - cherry-pick a no-op without --keep-redundant
ok 12 - cherry-pick a no-op with --keep-redundant
# passed all 12 test(s)
1..12
*** t3506-cherry-pick-ff.sh ***
ok 1 - setup
ok 2 - cherry-pick using --ff fast forwards
ok 3 - cherry-pick not using --ff does not fast forwards
ok 57 - rebase --onto --root drops patch in onto
ok 15 - git_rebase_interactive: added submodule creates empty directory
ok 4 - merge setup
ok 5 - cherry-pick a non-merge with --ff and -m should fail
ok 6 - cherry pick a merge with --ff but without -m should fail
not ok 58 - rebase -m --onto --root drops patch in onto # TODO known breakage
ok 7 - cherry pick with --ff a merge (1)
ok 8 - cherry pick with --ff a merge (2)
ok 9 - cherry pick a merge relative to nonexistent parent with --ff should fail
ok 10 - cherry pick a root commit with --ff
ok 11 - cherry-pick --ff on unborn branch
# passed all 11 test(s)
1..11
*** t3507-cherry-pick-conflict.sh ***
ok 1 - setup
ok 29 - rebase -p re-creates empty merge commit
# still have 2 known breakage(s)
# passed all remaining 27 test(s)
1..29
ok 2 - failed cherry-pick does not advance HEAD
*** t3508-cherry-pick-many-commits.sh ***
ok 3 - advice from failed cherry-pick
ok 4 - advice from failed cherry-pick --no-commit
ok 5 - failed cherry-pick sets CHERRY_PICK_HEAD
ok 1 - setup
ok 6 - successful cherry-pick does not set CHERRY_PICK_HEAD
ok 7 - cherry-pick --no-commit does not set CHERRY_PICK_HEAD
ok 8 - cherry-pick w/dirty tree does not set CHERRY_PICK_HEAD
ok 2 - cherry-pick first..fourth works
ok 9 - cherry-pick --strategy=resolve w/dirty tree does not set CHERRY_PICK_HEAD
ok 10 - GIT_CHERRY_PICK_HELP suppresses CHERRY_PICK_HEAD
ok 11 - git reset clears CHERRY_PICK_HEAD
ok 12 - failed commit does not clear CHERRY_PICK_HEAD
ok 59 - rebase -i --onto --root drops patch in onto
ok 3 - cherry-pick three one two works
ok 4 - cherry-pick three one two: fails
ok 13 - cancelled commit does not clear CHERRY_PICK_HEAD
ok 5 - output to keep user entertained during multi-pick
ok 14 - successful commit clears CHERRY_PICK_HEAD
ok 15 - failed cherry-pick produces dirty index
ok 16 - failed cherry-pick registers participants in index
ok 6 - cherry-pick --strategy resolve first..fourth works
ok 17 - failed cherry-pick describes conflict in work tree
ok 18 - diff3 -m style
ok 16 - git_rebase_interactive: added submodule leaves existing empty directory alone
ok 7 - output during multi-pick indicates merge strategy
ok 8 - cherry-pick --ff first..fourth works
ok 19 - revert also handles conflicts sanely
ok 9 - cherry-pick -n first..fourth works
ok 20 - failed revert sets REVERT_HEAD
ok 21 - successful revert does not set REVERT_HEAD
ok 10 - revert first..fourth works
ok 22 - revert --no-commit sets REVERT_HEAD
ok 23 - revert w/dirty tree does not set REVERT_HEAD
ok 11 - revert ^first fourth works
ok 24 - GIT_CHERRY_PICK_HELP does not suppress REVERT_HEAD
ok 25 - git reset clears REVERT_HEAD
ok 12 - revert fourth fourth~1 fourth~2 works
ok 17 - git_rebase_interactive: added submodule doesn't remove untracked unignored file with same name
ok 26 - failed commit does not clear REVERT_HEAD
ok 27 - revert conflict, diff3 -m style
ok 13 - cherry-pick -3 fourth works
ok 28 - failed cherry-pick does not forget -s
ok 29 - commit after failed cherry-pick does not add duplicated -s
ok 60 - rebase -p --onto --root drops patch in onto
ok 14 - cherry-pick --stdin works
# passed all 14 test(s)
1..14
*** t3509-cherry-pick-merge-df.sh ***
ok 30 - commit after failed cherry-pick adds -s at the right place
# passed all 30 test(s)
1..30
*** t3510-cherry-pick-sequence.sh ***
ok 1 - Initialize repository
ok 2 - Setup rename across paths each below D/F conflicts
ok 3 - Cherry-pick succeeds with rename across D/F conflicts
ok 4 - Setup rename with file on one side matching directory name on other
ok 1 - setup
ok 2 - cherry-pick persists data on failure
ok 5 - Cherry-pick succeeds with was_a_dir/file -> was_a_dir (resolve)
ok 61 - rebase --onto --root with merge-base does not go to root
ok 6 - Cherry-pick succeeds with was_a_dir/file -> was_a_dir (recursive)
ok 3 - cherry-pick mid-cherry-pick-sequence
ok 7 - Setup rename with file on one side matching different dirname on other
ok 4 - cherry-pick persists opts correctly
ok 8 - Cherry-pick with rename to different D/F conflict succeeds (resolve)
ok 9 - Cherry-pick with rename to different D/F conflict succeeds (recursive)
ok 5 - cherry-pick cleans up sequencer state upon success
# passed all 9 test(s)
1..9
*** t3511-cherry-pick-x.sh ***
ok 6 - --quit does not complain when no cherry-pick is in progress
ok 7 - --abort requires cherry-pick in progress
ok 62 - rebase -m --onto --root with merge-base does not go to root
ok 8 - --quit cleans up sequencer state
ok 9 - --quit keeps HEAD and conflicted index intact
ok 10 - --abort to cancel multiple cherry-pick
ok 1 - setup
ok 11 - --abort to cancel single cherry-pick
ok 2 - cherry-pick -x inserts blank line after one line subject
ok 12 - cherry-pick --abort to cancel multiple revert
ok 18 - git_rebase_interactive: replace tracked file with submodule creates empty directory
ok 3 - cherry-pick -s inserts blank line after one line subject
ok 13 - revert --abort works, too
ok 4 - cherry-pick -s inserts blank line after non-conforming footer
ok 5 - cherry-pick -x inserts blank line when conforming footer not found
ok 14 - --abort to cancel single revert
ok 6 - cherry-pick -s inserts blank line when conforming footer not found
ok 15 - --abort keeps unrelated change, easy case
ok 7 - cherry-pick -x -s inserts blank line when conforming footer not found
ok 16 - --abort refuses to clobber unrelated change, harder case
ok 8 - cherry-pick -s adds sob when last sob doesnt match committer
ok 9 - cherry-pick -x -s adds sob when last sob doesnt match committer
ok 17 - cherry-pick still writes sequencer state when one commit is left
ok 63 - rebase -i --onto --root with merge-base does not go to root
ok 10 - cherry-pick -s refrains from adding duplicate trailing sob
ok 18 - --abort after last commit in sequence
ok 11 - cherry-pick -x -s adds sob even when trailing sob exists for committer
not ok 19 - git_rebase_interactive: replace directory with submodule # TODO known breakage
ok 19 - cherry-pick does not implicitly stomp an existing operation
ok 12 - cherry-pick -x treats "(cherry picked from..." line as part of footer
ok 20 - --continue complains when no cherry-pick is in progress
ok 13 - cherry-pick -s treats "(cherry picked from..." line as part of footer
ok 21 - --continue complains when there are unresolved conflicts
ok 14 - cherry-pick -x -s treats "(cherry picked from..." line as part of footer
# passed all 14 test(s)
1..14
*** t3512-cherry-pick-submodule.sh ***
ok 22 - --continue of single cherry-pick
ok 23 - --continue of single revert
ok 24 - --continue after resolving conflicts
ok 25 - --continue after resolving conflicts and committing
ok 26 - --continue asks for help after resolving patch to nil
ok 27 - follow advice and skip nil patch
not ok 64 - rebase -p --onto --root with merge-base does not go to root # TODO known breakage
ok 28 - --continue respects opts
ok 29 - --continue of single-pick respects -x
ok 30 - --continue respects -x in first commit in multi-pick
not ok 31 - --signoff is automatically propagated to resolved conflict # TODO known breakage
ok 65 - rebase without --onto --root with disjoint history drops patch in onto
not ok 32 - --signoff dropped for implicit commit of resolution, multi-pick case # TODO known breakage
ok 20 - git_rebase_interactive: removed submodule leaves submodule directory and its contents in place
not ok 33 - sign-off needs to be reaffirmed after conflict resolution, single-pick case # TODO known breakage
not ok 66 - rebase -m without --onto --root with disjoint history drops patch in onto # TODO known breakage
ok 34 - malformed instruction sheet 1
ok 1 - git cherry-pick: added submodule creates empty directory
ok 35 - malformed instruction sheet 2
ok 36 - empty commit set
ok 37 - malformed instruction sheet 3
ok 38 - instruction sheet, fat-fingers version
ok 39 - commit descriptions in insn sheet are optional
# still have 3 known breakage(s)
# passed all remaining 36 test(s)
1..39
*** t3513-revert-submodule.sh ***
ok 2 - git cherry-pick: added submodule leaves existing empty directory alone
ok 3 - git cherry-pick: added submodule doesn't remove untracked unignored file with same name
ok 67 - rebase -i without --onto --root with disjoint history drops patch in onto
ok 4 - git cherry-pick: replace tracked file with submodule creates empty directory
ok 21 - git_rebase_interactive: removed submodule leaves submodule containing a .git directory alone
not ok 5 - git cherry-pick: replace directory with submodule # TODO known breakage
not ok 68 - rebase -p without --onto --root with disjoint history drops patch in onto # TODO known breakage
ok 6 - git cherry-pick: removed submodule leaves submodule directory and its contents in place
ok 1 - git_revert: added submodule creates empty directory
ok 22 - git_rebase_interactive: replace submodule with a directory must fail
ok 7 - git cherry-pick: removed submodule leaves submodule containing a .git directory alone
ok 2 - git_revert: added submodule leaves existing empty directory alone
not ok 69 - rebase --root on linear history is a no-op # TODO known breakage
ok 3 - git_revert: added submodule doesn't remove untracked unignored file with same name
not ok 8 - git cherry-pick: replace submodule with a directory must fail # TODO known breakage
ok 23 - git_rebase_interactive: replace submodule containing a .git directory with a directory must fail
ok 4 - git_revert: replace tracked file with submodule creates empty directory
not ok 9 - git cherry-pick: replace submodule containing a .git directory with a directory must fail # TODO known breakage
not ok 5 - git_revert: replace directory with submodule # TODO known breakage
not ok 70 - rebase -m --root on linear history is a no-op # TODO known breakage
not ok 10 - git cherry-pick: replace submodule with a file must fail # TODO known breakage
ok 6 - git_revert: removed submodule leaves submodule directory and its contents in place
not ok 11 - git cherry-pick: replace submodule containing a .git directory with a file must fail # TODO known breakage
not ok 24 - git_rebase_interactive: replace submodule with a file must fail # TODO known breakage
not ok 71 - rebase -i --root on linear history is a no-op # TODO known breakage
ok 7 - git_revert: removed submodule leaves submodule containing a .git directory alone
not ok 12 - git cherry-pick: modified submodule does not update submodule work tree # TODO known breakage
ok 8 - git_revert: replace submodule with a directory must fail
not ok 13 - git cherry-pick: modified submodule does not update submodule work tree to invalid commit # TODO known breakage
not ok 14 - git cherry-pick: modified submodule does not update submodule work tree from invalid commit # TODO known breakage
# still have 8 known breakage(s)
# passed all remaining 6 test(s)
1..14
*** t3600-rm.sh ***
ok 1 - Initialize test directory
not ok 72 - rebase -p --root on linear history is a no-op # TODO known breakage
ok 2 - add files with funny names
ok 3 - Pre-check that foo exists and is in index before git rm foo
ok 4 - Test that git rm foo succeeds
ok 5 - Test that git rm --cached foo succeeds if the index matches the file
ok 6 - Test that git rm --cached foo succeeds if the index matches the file
ok 7 - Test that git rm --cached foo fails if the index matches neither the file nor HEAD
ok 9 - git_revert: replace submodule containing a .git directory with a directory must fail
ok 8 - Test that git rm --cached -f foo works in case where --cached only did not
ok 9 - Post-check that foo exists but is not in index after git rm foo
ok 10 - Pre-check that bar exists and is in index before "git rm bar"
ok 11 - Test that "git rm bar" succeeds
ok 12 - Post-check that bar does not exist and is not in index after "git rm -f bar"
ok 13 - Test that "git rm -- -q" succeeds (remove a file that looks like an option)
ok 14 - Test that "git rm -f" succeeds with embedded space, tab, or newline characters.
ok 15 - Test that "git rm -f" fails if its rm fails
ok 16 - When the rm in "git rm -f" fails, it should not remove the file from the index
ok 17 - Remove nonexistent file with --ignore-unmatch
not ok 25 - git_rebase_interactive: replace submodule containing a .git directory with a file must fail # TODO known breakage
ok 18 - "rm" command printed
ok 19 - "rm" command suppressed with --quiet
ok 20 - Re-add foo and baz
ok 21 - Modify foo -- rm should refuse
ok 22 - Modified foo -- rm -f should work
ok 23 - Re-add foo and baz for HEAD tests
ok 24 - foo is different in index from HEAD -- rm should refuse
ok 25 - but with -f it should work.
ok 26 - refuse to remove cached empty file with modifications
ok 27 - remove intent-to-add file without --force
ok 28 - Recursive test setup
ok 29 - Recursive without -r fails
ok 30 - Recursive with -r but dirty
ok 31 - Recursive with -r -f
ok 32 - Remove nonexistent file returns nonzero exit status
ok 33 - Call "rm" from outside the work tree
ok 34 - refresh index before checking if it is up-to-date
not ok 10 - git_revert: replace submodule with a file must fail # TODO known breakage
ok 73 - rebase -f --root on linear history causes re-write
not ok 11 - git_revert: replace submodule containing a .git directory with a file must fail # TODO known breakage
ok 26 - git_rebase_interactive: modified submodule does not update submodule work tree
not ok 12 - git_revert: modified submodule does not update submodule work tree # TODO known breakage
ok 74 - rebase -m -f --root on linear history causes re-write
not ok 13 - git_revert: modified submodule does not update submodule work tree to invalid commit # TODO known breakage
not ok 14 - git_revert: modified submodule does not update submodule work tree from invalid commit # TODO known breakage
# still have 6 known breakage(s)
# passed all remaining 8 test(s)
1..14
*** t3700-add.sh ***
ok 1 - Test of git add
ok 2 - Post-check that foo is in the index
ok 3 - Test that "git add -- -q" works
ok 4 - git add: Test that executable bit is not used if core.filemode=0
ok 5 - git add: filemode=0 should not get confused by symlink
ok 6 - git update-index --add: Test that executable bit is not used...
ok 7 - git add: filemode=0 should not get confused by symlink
ok 8 - git update-index --add: Test that executable bit is not used...
ok 9 - .gitignore test setup
ok 10 - .gitignore is honored
ok 11 - error out when attempting to add ignored ones without -f
ok 12 - error out when attempting to add ignored ones without -f
ok 13 - add ignored ones with -f
ok 14 - add ignored ones with -f
ok 15 - add ignored ones with -f
ok 16 - .gitignore with subdirectory
ok 17 - check correct prefix detection
ok 18 - git add with filemode=0, symlinks=0, and unmerged entries
ok 19 - git add with filemode=0, symlinks=0 prefers stage 2 over stage 1
ok 75 - rebase -i -f --root on linear history causes re-write
ok 20 - git add --refresh
ok 21 - git add --refresh with pathspec
ok 22 - git add should fail atomically upon an unreadable file
ok 23 - git add --ignore-errors
ok 24 - git add (add.ignore-errors)
ok 25 - git add (add.ignore-errors = false)
ok 26 - --no-ignore-errors overrides config
ok 27 - git add 'fo\[ou\]bar' ignores foobar
ok 28 - git add to resolve conflicts on otherwise ignored path
ok 29 - "add non-existent" should fail
ok 30 - git add -A on empty repo does not error out
ok 31 - "git add ." in empty repo
ok 27 - git_rebase_interactive: modified submodule does not update submodule work tree to invalid commit
ok 32 - git add --dry-run of existing changed file
ok 33 - git add --dry-run of non-existing file
ok 34 - git add --dry-run of an existing file output
ok 35 - git add --dry-run --ignore-missing of non-existing file
ok 36 - git add --dry-run --ignore-missing of non-existing file output
# passed all 36 test(s)
1..36
*** t3701-add-interactive.sh ***
ok 1 - setup (initial)
ok 35 - choking "git rm" should not let it die with cruft
ok 36 - rm removes subdirectories recursively
ok 2 - status works (initial)
ok 3 - setup expected
ok 37 - rm removes empty submodules from work tree
ok 76 - rebase -p -f --root on linear history causes re-write
# still have 20 known breakage(s)
# passed all remaining 56 test(s)
1..76
ok 38 - rm removes removed submodule from index and .gitmodules
*** t3702-add-edit.sh ***
ok 4 - diff works (initial)
ok 1 - setup
ok 2 - add -e
# passed all 2 test(s)
1..2
*** t3703-add-magic-pathspec.sh ***
ok 1 - setup
ok 2 - add :/
ok 3 - add :/anothersub
ok 4 - add :/non-existent
ok 39 - rm removes work tree of unmodified submodules
ok 5 - a file with the same (long) magic name exists
ok 6 - a file with the same (short) magic name exists
# passed all 6 test(s)
1..6
*** t3800-mktag.sh ***
ok 1 - setup
ok 5 - revert works (initial)
ok 2 - Tag object length check
ok 3 - "object" line label check
ok 4 - "object" line SHA1 check
ok 6 - setup (commit)
ok 5 - "type" line label check
ok 6 - "type" line eol check
ok 7 - "tag" line label check #1
ok 8 - "tag" line label check #2
ok 9 - "type" line type-name length check
ok 10 - verify object (SHA1/type) check
ok 11 - verify tag-name check
ok 12 - "tagger" line label check #1
ok 13 - "tagger" line label check #2
ok 40 - rm removes a submodule with a trailing /
ok 14 - disallow missing tag author name
ok 41 - rm fails when given a file with a trailing /
ok 15 - disallow malformed tagger
ok 42 - rm succeeds when given a directory with a trailing /
ok 16 - allow empty tag email
ok 17 - disallow spaces in tag email
ok 18 - disallow missing tag timestamp
ok 19 - detect invalid tag timestamp1
ok 20 - detect invalid tag timestamp2
ok 21 - detect invalid tag timezone1
ok 22 - detect invalid tag timezone2
ok 23 - detect invalid tag timezone3
ok 24 - detect invalid header entry
ok 25 - create valid tag
ok 26 - check mytag
# passed all 26 test(s)
1..26
*** t3900-i18n-commit.sh ***
ok 28 - git_rebase_interactive: modified submodule does not update submodule work tree from invalid commit
# still have 5 known breakage(s)
# passed all remaining 23 test(s)
1..28
ok 7 - status works (commit)
ok 8 - setup expected
ok 1 - setup
ok 2 - no encoding header for base case
*** t3901-i18n-patch.sh ***
ok 3 - UTF-16 refused because of NULs
ok 4 - UTF-8 invalid characters refused
ok 5 - UTF-8 overlong sequences rejected
ok 43 - rm of a populated submodule with different HEAD fails unless forced
ok 6 - UTF-8 non-characters refused
ok 7 - UTF-8 non-characters refused
ok 1 - setup
ok 8 - ISO8859-1 setup
ok 2 - format-patch output (ISO-8859-1)
ok 9 - eucJP setup
ok 3 - format-patch output (UTF-8)
ok 10 - ISO-2022-JP setup
ok 11 - check encoding header for ISO8859-1
ok 12 - check encoding header for eucJP
ok 9 - diff works (commit)
ok 13 - check encoding header for ISO-2022-JP
ok 14 - config to remove customization
ok 15 - ISO8859-1 should be shown in UTF-8 now
ok 16 - eucJP should be shown in UTF-8 now
ok 17 - ISO-2022-JP should be shown in UTF-8 now
ok 18 - config to add customization
ok 19 - ISO8859-1 should be shown in itself now
ok 44 - rm --cached leaves work tree of populated submodules and .gitmodules alone
ok 20 - eucJP should be shown in itself now
ok 21 - ISO-2022-JP should be shown in itself now
ok 22 - config to tweak customization
ok 23 - ISO8859-1 should be shown in UTF-8 now
ok 24 - eucJP should be shown in UTF-8 now
ok 25 - ISO-2022-JP should be shown in UTF-8 now
ok 26 - eucJP should be shown in eucJP now
ok 27 - ISO-2022-JP should be shown in eucJP now
ok 28 - eucJP should be shown in ISO-2022-JP now
ok 29 - ISO-2022-JP should be shown in ISO-2022-JP now
ok 30 - No conversion with ISO8859-1
ok 31 - No conversion with eucJP
ok 45 - rm --dry-run does not touch the submodule or .gitmodules
ok 32 - No conversion with ISO-2022-JP
ok 4 - rebase (U/U)
ok 46 - rm does not complain when no .gitmodules file is found
ok 10 - revert works (commit)
ok 11 - setup expected
ok 12 - setup fake editor
ok 47 - rm will error out on a modified .gitmodules file unless staged
ok 5 - rebase (U/L)
ok 48 - rm issues a warning when section is not found in .gitmodules
ok 13 - dummy edit works
ok 14 - setup patch
ok 15 - setup fake editor
ok 33 - commit --fixup with eucJP encoding
ok 6 - rebase (L/L)
ok 16 - bad edit rejected
ok 17 - setup patch
ok 49 - rm of a populated submodule with modifications fails unless forced
ok 7 - rebase (L/U)
ok 18 - garbage edit rejected
ok 19 - setup patch
ok 20 - setup expected
ok 50 - rm of a populated submodule with untracked files fails unless forced
ok 8 - cherry-pick(U/U)
ok 9 - cherry-pick(L/L)
ok 21 - real edit works
ok 10 - cherry-pick(U/L)
ok 51 - setup submodule conflict
ok 34 - commit --squash with ISO-2022-JP encoding
# passed all 34 test(s)
1..34
*** t3902-quoted.sh ***
ok 11 - cherry-pick(L/U)
ok 1 - setup
ok 2 - setup expected files
ok 3 - check fully quoted output from ls-files
ok 4 - check fully quoted output from diff-files
ok 5 - check fully quoted output from diff-index
ok 6 - check fully quoted output from diff-tree
ok 7 - check fully quoted output from ls-tree
ok 8 - setting core.quotepath
ok 9 - check fully quoted output from ls-files
ok 10 - check fully quoted output from diff-files
ok 11 - check fully quoted output from diff-index
ok 12 - check fully quoted output from diff-tree
ok 52 - rm removes work tree of unmodified conflicted submodule
ok 13 - check fully quoted output from ls-tree
# passed all 13 test(s)
1..13
*** t3903-stash.sh ***
ok 22 - skip files similarly as commit -a
ok 12 - rebase --merge (U/U)
ok 1 - stash some dirty working directory
ok 2 - parents of stash
ok 3 - applying bogus stash does nothing
ok 53 - rm of a conflicted populated submodule with different HEAD fails unless forced
ok 23 - patch does not affect mode
ok 13 - rebase --merge (U/L)
ok 4 - apply does not need clean working directory
ok 5 - apply does not clobber working directory changes
ok 14 - rebase --merge (L/L)
ok 24 - stage mode but not hunk
ok 6 - apply stashed changes
ok 54 - rm of a conflicted populated submodule with modifications fails unless forced
ok 7 - apply stashed changes (including index)
ok 15 - rebase --merge (L/U)
# passed all 15 test(s)
1..15
ok 8 - unstashing in a subdirectory
*** t3904-stash-patch.sh ***
ok 25 - stage mode and hunk
ok 26 - setup again
ok 27 - setup patch
ok 28 - setup expected
ok 1 - setup
ok 55 - rm of a conflicted populated submodule with untracked files fails unless forced
ok 29 - add first line works
ok 30 - setup expected
ok 9 - drop top stash
ok 56 - rm of a conflicted populated submodule with a .git directory fails even when forced
ok 2 - saying "n" does nothing
ok 57 - rm of a conflicted unpopulated submodule succeeds
ok 31 - deleting a non-empty file
ok 32 - setup expected
ok 58 - rm of a populated submodule with a .git directory fails even when forced
ok 33 - deleting an empty file
ok 34 - split hunk setup
ok 3 - git stash -p
ok 10 - drop middle stash
ok 59 - setup subsubmodule
ok 35 - split hunk "add -p (edit)"
ok 11 - stash pop
ok 60 - rm recursively removes work tree of unmodified submodules
ok 4 - git stash -p --no-keep-index
ok 12 - stash branch
ok 36 - patch mode ignores unmerged entries
# passed all 36 test(s)
1..36
*** t3905-stash-include-untracked.sh ***
ok 13 - apply -q is quiet
ok 61 - rm of a populated nested submodule with different nested HEAD fails unless forced
ok 1 - stash save --include-untracked some dirty working directory
ok 2 - stash save --include-untracked cleaned the untracked files
ok 3 - stash save --include-untracked stashed the untracked files
ok 4 - stash save --patch --include-untracked fails
ok 14 - save -q is quiet
ok 5 - stash save --patch --all fails
ok 15 - pop -q is quiet
ok 6 - stash pop after save --include-untracked leaves files untracked again
ok 5 - git stash --no-keep-index -p
ok 6 - none of this moved HEAD
# passed all 6 test(s)
1..6
*** t3906-stash-submodule.sh ***
ok 7 - stash save -u dirty index
ok 16 - pop -q --index works and is quiet
ok 8 - stash save --include-untracked dirty index got stashed
ok 62 - rm of a populated nested submodule with nested modifications fails unless forced
ok 17 - drop -q is quiet
ok 9 - stash save --include-untracked -q is quiet
ok 18 - stash -k
ok 10 - stash save --include-untracked removed files
ok 19 - stash --no-keep-index
ok 11 - stash save --include-untracked removed files got stashed
ok 12 - stash save --include-untracked respects .gitignore
ok 20 - stash --invalid-option
ok 63 - rm of a populated nested submodule with nested untracked files fails unless forced
ok 13 - stash save -u can stash with only untracked files different
ok 21 - stash an added file
ok 14 - stash save --all does not respect .gitignore
ok 15 - stash save --all is stash poppable
# passed all 15 test(s)
1..15
*** t3910-mac-os-precompose.sh ***
ok 22 - stash rm then recreate
not ok 1 - git_stash: added submodule creates empty directory # TODO known breakage
1..0 # SKIP filesystem does not corrupt utf-8
*** t4000-diff-format.sh ***
ok 1 - update-index --add two files with and without +x.
ok 2 - git diff-files -p after editing work tree.
ok 3 - validate git diff-files -p output.
ok 4 - git diff-files -s after editing work tree
ok 5 - git diff-files --no-patch as synonym for -s
ok 6 - git diff-files --no-patch --patch shows the patch
ok 64 - rm of a populated nested submodule with a nested .git directory fails even when forced
ok 7 - git diff-files --no-patch --patch-with-raw shows the patch and raw data
ok 8 - git diff-files --patch --no-patch does not show the patch
# passed all 8 test(s)
1..8
*** t4001-diff-rename.sh ***
ok 1 - update-index --add a file.
ok 23 - stash rm and ignore
ok 2 - write that tree.
ok 3 - renamed and edited the file.
ok 4 - git diff-index -p -M after rename and editing.
ok 5 - validate the output.
not ok 2 - git_stash: added submodule leaves existing empty directory alone # TODO known breakage
ok 6 - favour same basenames over different ones
ok 7 - favour same basenames even with minor differences
ok 65 - checking out a commit after submodule removal needs manual updates
ok 66 - rm of d/f when d has become a non-directory
ok 67 - rm of d/f when d has become a dangling symlink
ok 3 - git_stash: added submodule doesn't remove untracked unignored file with same name
ok 68 - rm of file when it has become a directory
ok 69 - rm across a symlinked leading path (no index)
ok 24 - stash rm and ignore (stage .gitignore)
ok 8 - setup for many rename source candidates
not ok 70 - rm across a symlinked leading path (w/ index) # TODO known breakage
ok 71 - setup for testing rm messages
ok 72 - rm files with different staged content
ok 73 - rm files with different staged content without hints
ok 74 - rm file with local modification
ok 9 - rename pretty print with nothing in common
ok 75 - rm file with local modification without hints
ok 76 - rm file with changes in the index
ok 10 - rename pretty print with common prefix
ok 77 - rm file with changes in the index without hints
ok 78 - rm files with two different errors
# still have 1 known breakage(s)
# passed all remaining 77 test(s)
1..78
ok 11 - rename pretty print with common suffix
ok 12 - rename pretty print with common prefix and suffix
*** t4002-diff-basic.sh ***
ok 25 - stash file to symlink
ok 13 - rename pretty print common prefix and suffix overlap
# passed all 13 test(s)
1..13
ok 1 - adding test file NN and Z/NN
ok 2 - adding test file ND and Z/ND
*** t4003-diff-rename-1.sh ***
ok 3 - adding test file NM and Z/NM
not ok 4 - git_stash: replace tracked file with submodule creates empty directory # TODO known breakage
ok 4 - adding test file DN and Z/DN
ok 5 - adding test file DD and Z/DD
ok 6 - adding test file DM and Z/DM
ok 1 - prepare reference tree
ok 7 - adding test file MN and Z/MN
ok 2 - prepare work tree
ok 8 - adding test file MD and Z/MD
ok 3 - validate output from rename/copy detection (#1)
ok 9 - adding test file MM and Z/MM
ok 4 - prepare work tree again
ok 10 - adding test file SS
ok 11 - adding test file TT
ok 12 - prepare initial tree
ok 5 - validate output from rename/copy detection (#2)
ok 13 - change in branch A (removal)
ok 6 - prepare work tree once again
ok 14 - change in branch A (modification)
ok 15 - change in branch A (modification)
ok 7 - validate output from rename/copy detection (#3)
ok 16 - change in branch A (modification)
# passed all 7 test(s)
1..7
ok 17 - change in branch A (modification)
*** t4004-diff-rename-symlink.sh ***
ok 18 - change in branch A (modification)
ok 26 - stash file to symlink (stage rm)
ok 19 - change in branch A (modification)
ok 20 - change in branch A (addition)
ok 21 - change in branch A (addition)
ok 22 - change in branch A (addition)
ok 23 - change in branch A (addition)
ok 24 - change in branch A (addition)
ok 1 - prepare reference tree
ok 25 - change in branch A (edit)
ok 26 - change in branch A (change file to directory)
ok 2 - prepare work tree
ok 27 - recording branch A tree
ok 3 - setup diff output
ok 4 - validate diff output
# passed all 4 test(s)
1..4
*** t4005-diff-rename-2.sh ***
ok 28 - reading original tree and checking out
ok 29 - change in branch B (removal)
ok 30 - change in branch B (modification)
ok 31 - change in branch B (modification)
ok 32 - change in branch B (modification)
ok 33 - change in branch B (modification)
ok 1 - prepare reference tree
ok 34 - change in branch B (modification)
ok 35 - change in branch B (modification)
ok 36 - change in branch B (addition)
ok 2 - prepare work tree
ok 37 - change in branch B (addition)
ok 38 - change in branch B (addition)
ok 39 - change in branch B (addition)
ok 3 - validate output from rename/copy detection (#1)
ok 4 - prepare work tree again
ok 40 - change in branch B (addition and modification)
ok 41 - change in branch B (modification)
ok 27 - stash file to symlink (full stage)
ok 42 - change in branch B (addition of a file to conflict with directory)
ok 5 - validate output from rename/copy detection (#2)
not ok 5 - git_stash: replace directory with submodule # TODO known breakage
ok 43 - recording branch B tree
ok 6 - prepare work tree once again
ok 7 - validate output from rename/copy detection (#3)
# passed all 7 test(s)
1..7
*** t4006-diff-mode.sh ***
ok 44 - keep contents of 3 trees for easy access
ok 45 - diff-tree of known trees.
ok 46 - diff-tree of known trees.
ok 47 - diff-tree of known trees.
ok 1 - setup
ok 48 - diff-tree of known trees.
ok 49 - diff-tree of known trees.
ok 2 - chmod
ok 50 - diff-tree of known trees.
ok 51 - diff-tree --stdin of known trees.
ok 52 - diff-tree --stdin of known trees.
ok 3 - prepare binary file
ok 28 - stash symlink to file
# passed all 3 test(s)
ok 29 - this must have re-created the symlink
1..3
ok 53 - diff-cache O with A in cache
*** t4007-rename-3.sh ***
ok 54 - diff-cache O with B in cache
ok 55 - diff-cache A with B in cache
ok 56 - diff-files with O in cache and A checked out
ok 1 - prepare reference tree
ok 2 - prepare work tree
ok 3 - copy detection
ok 4 - copy detection, cached
ok 57 - diff-files with O in cache and B checked out
ok 30 - unstash must re-create the file
ok 5 - copy, limited to a subtree
ok 6 - tweak work tree
ok 58 - diff-files with A in cache and B checked out
ok 7 - rename detection
ok 59 - diff-tree O A == diff-tree -R A O
ok 8 - rename, limited to a subtree
# passed all 8 test(s)
1..8
ok 60 - diff-tree -r O A == diff-tree -r -R A O
*** t4008-diff-break-rewrite.sh ***
ok 61 - diff-tree B A == diff-tree -R A B
ok 62 - diff-tree -r B A == diff-tree -r -R A B
ok 63 - diff can read from stdin
# passed all 63 test(s)
1..63
ok 31 - stash symlink to file (stage rm)
ok 32 - this must have re-created the symlink
ok 1 - setup
ok 2 - change file1 with copy-edit of file0 and remove file0
*** t4009-diff-rename-4.sh ***
ok 3 - run diff with -B
ok 4 - validate result of -B (#1)
ok 5 - run diff with -B and -M
ok 6 - validate result of -B -M (#2)
ok 1 - prepare reference tree
ok 7 - swap file0 and file1
ok 8 - run diff with -B
ok 33 - unstash must re-create the file
ok 2 - prepare work tree
ok 9 - validate result of -B (#3)
ok 10 - run diff with -B and -M
ok 3 - validate output from rename/copy detection (#1)
ok 11 - validate result of -B -M (#4)
ok 4 - prepare work tree again
ok 12 - make file0 into something completely different
ok 5 - validate output from rename/copy detection (#2)
ok 13 - run diff with -B
ok 6 - prepare work tree once again
ok 14 - validate result of -B (#5)
ok 15 - run diff with -B -M
ok 16 - validate result of -B -M (#6)
ok 7 - validate output from rename/copy detection (#3)
# passed all 7 test(s)
1..7
ok 17 - run diff with -M
*** t4010-diff-pathspec.sh ***
ok 18 - validate result of -M (#7)
ok 34 - stash symlink to file (full stage)
ok 35 - this must have re-created the symlink
ok 19 - file1 edited to look like file0 and file0 rename-edited to file2
not ok 6 - git_stash: removed submodule leaves submodule directory and its contents in place # TODO known breakage
ok 20 - run diff with -B
ok 21 - validate result of -B (#8)
ok 22 - run diff with -B -C
ok 1 - setup
ok 23 - validate result of -B -M (#9)
# passed all 23 test(s)
1..23
ok 2 - limit to path should show nothing
*** t4011-diff-symlink.sh ***
ok 3 - limit to path1 should show path1/file1
ok 36 - unstash must re-create the file
ok 4 - limit to path1/ should show path1/file1
ok 5 - "*file1" should show path1/file1
ok 6 - limit to file0 should show file0
ok 7 - limit to file0/ should emit nothing.
ok 8 - diff-tree pathspec
ok 1 - diff new symlink and file
ok 9 - diff-tree with wildcard shows dir also matches
ok 10 - diff-tree -r with wildcard
ok 2 - diff unchanged symlink and file
ok 11 - diff-tree with wildcard shows dir also matches
ok 12 - diff-tree -r with wildcard from beginning
ok 3 - diff removed symlink and file
ok 13 - diff-tree -r with wildcard
ok 4 - diff identical, but newly created symlink and file
ok 5 - diff different symlink and file
ok 6 - diff symlinks with non-existing targets
ok 7 - setup symlinks with attributes
ok 14 - setup submodules
ok 15 - diff-tree ignores trailing slash on submodule path
ok 8 - symlinks do not respect userdiff config by path
# passed all 8 test(s)
1..8
*** t4012-diff-binary.sh ***
ok 16 - diff multiple wildcard pathspecs
not ok 37 - stash directory to file # TODO known breakage
ok 17 - diff-cache ignores trailing slash on submodule path
# passed all 17 test(s)
1..17
ok 1 - prepare repository
*** t4013-diff-various.sh ***
ok 2 - apply --stat output for binary file change
ok 3 - diff --shortstat output for binary file change
ok 4 - diff --shortstat output for binary file change only
ok 5 - apply --numstat notices binary file change
ok 6 - apply --numstat understands diff --binary format
ok 7 - apply detecting corrupt patch correctly
ok 8 - apply detecting corrupt patch correctly
ok 9 - initial commit
ok 10 - diff-index with --binary
ok 11 - apply binary patch
not ok 38 - stash file to directory # TODO known breakage
ok 12 - diff --no-index with binary creation
not ok 7 - git_stash: removed submodule leaves submodule containing a .git directory alone # TODO known breakage
ok 1 - setup
ok 2 - git diff-tree initial
ok 3 - git diff-tree -r initial
ok 4 - git diff-tree -r --abbrev initial
ok 5 - git diff-tree -r --abbrev=4 initial
ok 6 - git diff-tree --root initial
ok 7 - git diff-tree --root --abbrev initial
ok 8 - git diff-tree --root -r initial
ok 9 - git diff-tree --root -r --abbrev initial
ok 39 - stash branch - no stashes on stack, stash-like argument
ok 10 - git diff-tree --root -r --abbrev=4 initial
ok 11 - git diff-tree -p initial
ok 12 - git diff-tree --root -p initial
ok 13 - git diff-tree --patch-with-stat initial
ok 14 - git diff-tree --root --patch-with-stat initial
ok 15 - git diff-tree --patch-with-raw initial
ok 13 - diff --stat with binary files and big change count
ok 16 - git diff-tree --root --patch-with-raw initial
# passed all 13 test(s)
1..13
*** t4014-format-patch.sh ***
ok 17 - git diff-tree --pretty initial
ok 18 - git diff-tree --pretty --root initial
ok 19 - git diff-tree --pretty -p initial
ok 20 - git diff-tree --pretty --stat initial
ok 21 - git diff-tree --pretty --summary initial
ok 22 - git diff-tree --pretty --stat --summary initial
ok 23 - git diff-tree --pretty --root -p initial
ok 24 - git diff-tree --pretty --root --stat initial
ok 25 - git diff-tree --pretty --root --summary initial
ok 8 - git_stash: replace submodule with a directory must fail
ok 26 - git diff-tree --pretty --root --summary -r initial
ok 27 - git diff-tree --pretty --root --stat --summary initial
ok 1 - setup
ok 28 - git diff-tree --pretty --patch-with-stat initial
ok 2 - format-patch --ignore-if-in-upstream
ok 29 - git diff-tree --pretty --root --patch-with-stat initial
ok 3 - format-patch --ignore-if-in-upstream
ok 30 - git diff-tree --pretty --patch-with-raw initial
ok 31 - git diff-tree --pretty --root --patch-with-raw initial
ok 32 - git diff-tree --pretty=oneline initial
ok 33 - git diff-tree --pretty=oneline --root initial
ok 4 - format-patch doesn't consider merge commits
ok 34 - git diff-tree --pretty=oneline -p initial
ok 35 - git diff-tree --pretty=oneline --root -p initial
ok 36 - git diff-tree --pretty=oneline --patch-with-stat initial
ok 37 - git diff-tree --pretty=oneline --root --patch-with-stat initial
ok 38 - git diff-tree --pretty=oneline --patch-with-raw initial
ok 39 - git diff-tree --pretty=oneline --root --patch-with-raw initial
ok 40 - stash branch - stashes on stack, stash-like argument
ok 40 - git diff-tree --pretty side
ok 41 - git diff-tree --pretty -p side
ok 42 - git diff-tree --pretty --patch-with-stat side
ok 43 - git diff-tree master
ok 44 - git diff-tree -p master
ok 45 - git diff-tree -p -m master
ok 46 - git diff-tree -c master
ok 47 - git diff-tree -c --abbrev master
ok 48 - git diff-tree --cc master
ok 49 - git diff-tree -c --stat master
ok 50 - git diff-tree --cc --stat master
ok 51 - git diff-tree -c --stat --summary master
ok 52 - git diff-tree --cc --stat --summary master
ok 5 - format-patch result applies
ok 53 - git diff-tree -c --stat --summary side
ok 54 - git diff-tree --cc --stat --summary side
ok 55 - git diff-tree --cc --patch-with-stat master
ok 9 - git_stash: replace submodule containing a .git directory with a directory must fail
ok 56 - git diff-tree --cc --patch-with-stat --summary master
ok 57 - git diff-tree --cc --patch-with-stat --summary side
ok 58 - git log master
ok 59 - git log -p master
ok 60 - git log --root master
ok 61 - git log --root -p master
ok 62 - git log --patch-with-stat master
ok 63 - git log --root --patch-with-stat master
ok 6 - format-patch --ignore-if-in-upstream result applies
ok 7 - commit did not screw up the log message
ok 41 - stash show format defaults to --stat
ok 8 - format-patch did not screw up the log message
ok 64 - git log --root --patch-with-stat --summary master
ok 9 - replay did not screw up the log message
ok 65 - git log --root -c --patch-with-stat --summary master
ok 10 - extra headers
ok 66 - git log --root --cc --patch-with-stat --summary master
ok 11 - extra headers without newlines
ok 67 - git log -p --first-parent master
ok 68 - git log -m -p --first-parent master
ok 12 - extra headers with multiple To:s
ok 69 - git log -m -p master
ok 13 - additional command line cc (ascii)
ok 70 - git log -SF master
not ok 14 - additional command line cc (rfc822) # TODO known breakage
ok 71 - git log -S F master
ok 15 - command line headers
ok 72 - git log -SF -p master
ok 16 - configuration headers and command line headers
ok 73 - git log -SF master --max-count=0
ok 74 - git log -SF master --max-count=1
ok 17 - command line To: header (ascii)
ok 75 - git log -SF master --max-count=2
not ok 18 - command line To: header (rfc822) # TODO known breakage
ok 76 - git log -GF master
not ok 19 - command line To: header (rfc2047) # TODO known breakage
ok 77 - git log -GF -p master
ok 20 - configuration To: header (ascii)
ok 78 - git log -GF -p --pickaxe-all master
ok 79 - git log --decorate --all
not ok 21 - configuration To: header (rfc822) # TODO known breakage
ok 80 - git log --decorate=full --all
not ok 22 - configuration To: header (rfc2047) # TODO known breakage
ok 81 - git rev-list --parents HEAD
ok 23 - --no-to overrides config.to
ok 82 - git rev-list --children HEAD
ok 83 - git whatchanged master
ok 24 - --no-to and --to replaces config.to
ok 84 - git whatchanged -p master
ok 25 - --no-cc overrides config.cc
ok 85 - git whatchanged --root master
ok 26 - --no-add-header overrides config.headers
not ok 10 - git_stash: replace submodule with a file must fail # TODO known breakage
ok 86 - git whatchanged --root -p master
ok 27 - multiple files
ok 87 - git whatchanged --patch-with-stat master
ok 88 - git whatchanged --root --patch-with-stat master
ok 28 - reroll count
ok 89 - git whatchanged --root --patch-with-stat --summary master
ok 29 - reroll count (-v)
ok 42 - stash show - stashes on stack, stash-like argument
ok 90 - git whatchanged --root -c --patch-with-stat --summary master
ok 30 - no threading
ok 91 - git whatchanged --root --cc --patch-with-stat --summary master
ok 31 - thread
ok 92 - git whatchanged -SF master
ok 32 - thread in-reply-to
ok 93 - git whatchanged -SF -p master
ok 33 - thread cover-letter
ok 94 - git log --patch-with-stat master -- dir/
ok 34 - thread cover-letter in-reply-to
ok 95 - git whatchanged --patch-with-stat master -- dir/
ok 35 - thread explicit shallow
ok 96 - git log --patch-with-stat --summary master -- dir/
ok 36 - thread deep
ok 97 - git whatchanged --patch-with-stat --summary master -- dir/
ok 37 - thread deep in-reply-to
ok 98 - git show initial
ok 38 - thread deep cover-letter
ok 99 - git show --root initial
ok 39 - thread deep cover-letter in-reply-to
ok 100 - git show side
ok 40 - thread via config
ok 101 - git show master
ok 102 - git show -c master
ok 41 - thread deep via config
ok 103 - git show -m master
ok 42 - thread config + override
ok 104 - git show --first-parent master
ok 105 - git show --stat side
ok 43 - thread config + --no-thread
ok 106 - git show --stat --summary side
ok 107 - git show --patch-with-stat side
ok 108 - git show --patch-with-raw side
ok 44 - excessive subject
ok 109 - git show --patch-with-stat --summary side
ok 110 - git format-patch --stdout initial..side
ok 45 - cover-letter inherits diff options
ok 111 - git format-patch --stdout initial..master^
ok 46 - shortlog of cover-letter wraps overly-long onelines
ok 112 - git format-patch --stdout initial..master
ok 47 - format-patch respects -U
ok 113 - git format-patch --stdout --no-numbered initial..master
ok 48 - format-patch -p suppresses stat
ok 114 - git format-patch --stdout --numbered initial..master
ok 49 - format-patch from a subdirectory (1)
ok 43 - stash show -p - stashes on stack, stash-like argument
ok 115 - git format-patch --attach --stdout initial..side
ok 50 - format-patch from a subdirectory (2)
ok 51 - format-patch from a subdirectory (3)
ok 116 - git format-patch --attach --stdout --suffix=.diff initial..side
ok 52 - format-patch --in-reply-to
ok 117 - git format-patch --attach --stdout initial..master^
ok 53 - format-patch --signoff
ok 118 - git format-patch --attach --stdout initial..master
ok 54 - format-patch --notes --signoff
ok 119 - git format-patch --inline --stdout initial..side
ok 120 - git format-patch --inline --stdout initial..master^
not ok 11 - git_stash: replace submodule containing a .git directory with a file must fail # TODO known breakage
ok 55 - options no longer allowed for format-patch
ok 56 - format-patch --numstat should produce a patch
ok 121 - git format-patch --inline --stdout --numbered-files initial..master
ok 57 - format-patch -- <path>
ok 58 - format-patch --ignore-if-in-upstream HEAD
ok 122 - git format-patch --inline --stdout initial..master
ok 59 - format-patch --signature
ok 123 - git format-patch --inline --stdout --subject-prefix=TESTCASE initial..master
ok 60 - format-patch with format.signature config
ok 124 - git config format.subjectprefix DIFFERENT_PREFIX
ok 61 - format-patch --signature overrides format.signature
ok 125 - git format-patch --inline --stdout initial..master^^
ok 62 - format-patch --no-signature ignores format.signature
ok 126 - git format-patch --stdout --cover-letter -n initial..master^
ok 44 - stash show - no stashes on stack, stash-like argument
ok 127 - git diff --abbrev initial..side
ok 63 - format-patch --signature --cover-letter
ok 128 - git diff -r initial..side
ok 64 - format.signature="" suppresses signatures
ok 129 - git diff --stat initial..side
ok 130 - git diff -r --stat initial..side
ok 65 - format-patch --no-signature suppresses signatures
ok 131 - git diff initial..side
ok 132 - git diff --patch-with-stat initial..side
ok 66 - format-patch --signature="" suppresses signatures
ok 67 - prepare mail-signature input
ok 133 - git diff --patch-with-raw initial..side
ok 68 - --signature-file=file works
ok 134 - git diff --patch-with-stat -r initial..side
ok 135 - git diff --patch-with-raw -r initial..side
ok 69 - format.signaturefile works
ok 136 - git diff --name-status dir2 dir
ok 137 - git diff --no-index --name-status dir2 dir
ok 70 - --no-signature suppresses format.signaturefile
ok 138 - git diff --no-index --name-status -- dir2 dir
ok 139 - git diff --no-index dir dir3
ok 140 - git diff master master^ side
ok 71 - --signature-file overrides format.signaturefile
ok 45 - stash show -p - no stashes on stack, stash-like argument
ok 141 - git diff --dirstat master~1 master~2
ok 72 - --signature overrides format.signaturefile
ok 142 - git diff --dirstat initial rearrange
ok 143 - git diff --dirstat-by-file initial rearrange
ok 144 - log -S requires an argument
ok 145 - diff --cached on unborn branch
ok 146 - diff --cached -- file on unborn branch
ok 147 - diff-tree --stdin with log formatting
# passed all 147 test(s)
1..147
*** t4015-diff-whitespace.sh ***
not ok 12 - git_stash: modified submodule does not update submodule work tree # TODO known breakage
ok 1 - Ray's example without options
ok 2 - Ray's example with -w
ok 3 - Ray's example with -b
ok 4 - another test, without options
ok 5 - another test, with -w
ok 6 - another test, with -w -b
ok 7 - another test, with -w --ignore-space-at-eol
ok 8 - another test, with -w -b --ignore-space-at-eol
ok 9 - another test, with -b
ok 10 - another test, with -b --ignore-space-at-eol
ok 11 - another test, with --ignore-space-at-eol
ok 12 - ignore-blank-lines: only new lines
ok 13 - ignore-blank-lines: only new lines with space
ok 14 - ignore-blank-lines: after change
ok 15 - ignore-blank-lines: before change
ok 16 - ignore-blank-lines: between changes
ok 17 - ignore-blank-lines: between changes (with interhunkctx)
ok 73 - format-patch --stdout paginates
ok 18 - ignore-blank-lines: scattered spaces
ok 19 - ignore-blank-lines: spaces coalesce
ok 20 - ignore-blank-lines: mix changes and blank lines
ok 21 - check mixed spaces and tabs in indent
ok 22 - check mixed tabs and spaces in indent
ok 46 - stash drop - fail early if specified stash is not a stash reference
not ok 13 - git_stash: modified submodule does not update submodule work tree to invalid commit # TODO known breakage
ok 23 - check with no whitespace errors
ok 24 - check with trailing whitespace
ok 25 - check with space before tab in indent
ok 26 - --check and --exit-code are not exclusive
ok 27 - --check and --quiet are not exclusive
ok 28 - check staged with no whitespace errors
ok 29 - check staged with trailing whitespace
ok 30 - check staged with space before tab in indent
ok 31 - check with no whitespace errors (diff-index)
ok 32 - check with trailing whitespace (diff-index)
ok 33 - check with space before tab in indent (diff-index)
ok 34 - check staged with no whitespace errors (diff-index)
ok 35 - check staged with trailing whitespace (diff-index)
ok 36 - check staged with space before tab in indent (diff-index)
ok 37 - check with no whitespace errors (diff-tree)
ok 38 - check with trailing whitespace (diff-tree)
ok 39 - check with space before tab in indent (diff-tree)
not ok 14 - git_stash: modified submodule does not update submodule work tree from invalid commit # TODO known breakage
# still have 11 known breakage(s)
# passed all remaining 3 test(s)
1..14
ok 40 - check trailing whitespace (trailing-space: off)
ok 41 - check trailing whitespace (trailing-space: on)
ok 42 - check space before tab in indent (space-before-tab: off)
ok 43 - check space before tab in indent (space-before-tab: on)
*** t4016-diff-quote.sh ***
ok 44 - check spaces as indentation (indent-with-non-tab: off)
ok 45 - check spaces as indentation (indent-with-non-tab: on)
ok 46 - ditto, but tabwidth=9
ok 47 - check tabs and spaces as indentation (indent-with-non-tab: on)
ok 74 - format-patch --stdout pagination can be disabled
ok 48 - ditto, but tabwidth=10
ok 49 - ditto, but tabwidth=20
ok 50 - check tabs as indentation (tab-in-indent: off)
ok 51 - check tabs as indentation (tab-in-indent: on)
ok 75 - format-patch handles multi-line subjects
ok 52 - check tabs and spaces as indentation (tab-in-indent: on)
ok 53 - ditto, but tabwidth=1 (must be irrelevant)
ok 76 - format-patch handles multi-line encoded subjects
ok 54 - check tab-in-indent and indent-with-non-tab conflict
ok 55 - check tab-in-indent excluded from wildcard whitespace attribute
ok 56 - line numbers in --check output are correct
ok 57 - checkdiff detects new trailing blank lines (1)
ok 77 - format-patch wraps extremely long subject (ascii)
ok 1 - setup
ok 2 - setup expected files
ok 58 - checkdiff detects new trailing blank lines (2)
ok 3 - git diff --summary -M HEAD
ok 59 - checkdiff allows new blank lines
ok 4 - git diff --numstat -M HEAD
ok 78 - format-patch wraps extremely long subject (rfc2047)
ok 5 - git diff --stat -M HEAD
# passed all 5 test(s)
1..5
ok 60 - whitespace-only changes not reported
*** t4017-diff-retval.sh ***
ok 79 - format-patch quotes dot in from-headers
ok 80 - format-patch quotes double-quote in from-headers
ok 61 - whitespace-only changes reported across renames
ok 47 - stash pop - fail early if specified stash is not a stash reference
ok 81 - format-patch uses rfc2047-encoded from-headers when necessary
ok 62 - rename empty
ok 1 - setup
ok 2 - git diff --quiet -w HEAD^^ HEAD^
ok 82 - rfc2047-encoded from-headers leave no rfc822 specials
ok 3 - git diff --quiet HEAD^^ HEAD^
ok 4 - git diff --quiet -w HEAD^ HEAD
ok 5 - git diff-tree HEAD^ HEAD
ok 6 - git diff-tree HEAD^ HEAD -- a
ok 7 - git diff-tree HEAD^ HEAD -- b
ok 83 - format-patch wraps moderately long from-header (ascii)
ok 8 - echo HEAD | git diff-tree --stdin
ok 9 - git diff-tree HEAD HEAD
ok 63 - combined diff with autocrlf conversion
ok 10 - git diff-files
ok 11 - git diff-index --cached HEAD
ok 84 - format-patch wraps extremely long from-header (ascii)
ok 12 - git diff-index --cached HEAD^
ok 13 - git diff-index --cached HEAD^
ok 14 - git diff-tree -Stext HEAD^ HEAD -- b
ok 85 - format-patch wraps extremely long from-header (rfc822)
ok 64 - setup diff colors
ok 15 - git diff-tree -Snot-found HEAD^ HEAD -- b
ok 16 - git diff-files
ok 17 - git diff-index --cached HEAD
ok 65 - diff that introduces a line with only tabs
ok 86 - format-patch wraps extremely long from-header (rfc2047)
ok 18 - --check --exit-code returns 0 for no difference
# passed all 65 test(s)
1..65
ok 19 - --check --exit-code returns 1 for a clean difference
ok 20 - --check --exit-code returns 3 for a dirty difference
ok 21 - --check with --no-pager returns 2 for dirty difference
*** t4018-diff-funcname.sh ***
ok 22 - check should test not just the last line
ok 87 - subject lines do not have 822 atom-quoting
ok 88 - subject prefixes have space prepended
ok 89 - empty subject prefix does not have extra space
ok 90 - --from=ident notices bogus ident
ok 91 - --from=ident replaces author
ok 1 - setup
ok 92 - --from uses committer ident
ok 23 - check detects leftover conflict markers
ok 2 - builtin ada pattern compiles
ok 3 - builtin ada wordRegex pattern compiles
ok 93 - --from omits redundant in-body header
ok 4 - builtin bibtex pattern compiles
ok 5 - builtin bibtex wordRegex pattern compiles
ok 6 - builtin cpp pattern compiles
ok 24 - check honors conflict marker length
# passed all 24 test(s)
1..24
ok 7 - builtin cpp wordRegex pattern compiles
ok 94 - in-body headers trigger content encoding
ok 8 - builtin csharp pattern compiles
*** t4019-diff-wserror.sh ***
ok 9 - builtin csharp wordRegex pattern compiles
ok 95 - signoff: commit with no body
ok 10 - builtin fortran pattern compiles
ok 11 - builtin fortran wordRegex pattern compiles
ok 96 - signoff: commit with only subject
ok 12 - builtin html pattern compiles
ok 1 - setup
ok 13 - builtin html wordRegex pattern compiles
ok 97 - signoff: commit with only subject that does not end with NL
ok 14 - builtin java pattern compiles
ok 15 - builtin java wordRegex pattern compiles
ok 2 - default
ok 16 - builtin matlab pattern compiles
ok 98 - signoff: no existing signoffs
ok 17 - builtin matlab wordRegex pattern compiles
ok 3 - default (attribute)
ok 18 - builtin objc pattern compiles
ok 99 - signoff: no existing signoffs and no trailing NL
ok 19 - builtin objc wordRegex pattern compiles
ok 4 - default, tabwidth=10 (attribute)
ok 20 - builtin pascal pattern compiles
ok 100 - signoff: some random signoff
ok 21 - builtin pascal wordRegex pattern compiles
ok 22 - builtin perl pattern compiles
ok 23 - builtin perl wordRegex pattern compiles
ok 5 - no check (attribute)
ok 101 - signoff: misc conforming footer elements
ok 24 - builtin php pattern compiles
ok 25 - builtin php wordRegex pattern compiles
ok 26 - builtin python pattern compiles
ok 6 - no check, tabwidth=10 (attribute), must be irrelevant
ok 102 - signoff: some random signoff-alike
ok 27 - builtin python wordRegex pattern compiles
ok 28 - builtin ruby pattern compiles
ok 103 - signoff: not really a signoff
ok 7 - without -trail
ok 29 - builtin ruby wordRegex pattern compiles
ok 30 - builtin tex pattern compiles
ok 104 - signoff: not really a signoff (2)
ok 31 - builtin tex wordRegex pattern compiles
ok 8 - without -trail (attribute)
ok 32 - builtin custom1 pattern compiles
ok 105 - signoff: valid S-o-b paragraph in the middle
ok 33 - builtin custom1 wordRegex pattern compiles
ok 48 - ref with non-existent reflog
ok 9 - without -space
ok 34 - builtin custom2 pattern compiles
ok 35 - builtin custom2 wordRegex pattern compiles
ok 106 - signoff: the same signoff at the end
ok 36 - builtin custom3 pattern compiles
ok 10 - without -space (attribute)
ok 37 - builtin custom3 wordRegex pattern compiles
ok 107 - signoff: the same signoff at the end, no trailing NL
ok 38 - last regexp must not be negated
ok 11 - with indent-non-tab only
ok 108 - signoff: the same signoff NOT at the end
ok 109 - signoff: detect garbage in non-conforming footer
ok 12 - with indent-non-tab only (attribute)
ok 110 - signoff: footer begins with non-signoff without @ sign
ok 13 - with indent-non-tab only, tabwidth=10
ok 111 - format patch ignores color.ui
ok 14 - with indent-non-tab only, tabwidth=10 (attribute)
ok 39 - setup hunk header tests
ok 15 - with cr-at-eol
ok 112 - cover letter using branch description (1)
ok 40 - hunk header: README
ok 41 - hunk header: cpp-c++-function
ok 16 - with cr-at-eol (attribute)
ok 113 - cover letter using branch description (2)
ok 42 - hunk header: cpp-class-constructor
ok 17 - trailing empty lines (1)
ok 18 - trailing empty lines (2)
ok 43 - hunk header: cpp-class-constructor-mem-init
ok 19 - checkdiff shows correct line number for trailing blank lines
ok 44 - hunk header: cpp-class-definition
ok 114 - cover letter using branch description (3)
ok 20 - do not color trailing cr in context
ok 45 - hunk header: cpp-class-definition-derived
ok 21 - color new trailing blank lines
ok 46 - hunk header: cpp-class-destructor
# passed all 21 test(s)
1..21
ok 115 - cover letter using branch description (4)
ok 47 - hunk header: cpp-function-returning-global-type
*** t4020-diff-external.sh ***
ok 48 - hunk header: cpp-function-returning-nested
ok 116 - cover letter using branch description (5)
ok 49 - hunk header: cpp-function-returning-pointer
ok 50 - hunk header: cpp-function-returning-reference
ok 117 - cover letter using branch description (6)
ok 51 - hunk header: cpp-gnu-style-function
ok 118 - cover letter with nothing
ok 1 - setup
ok 52 - hunk header: cpp-namespace-definition
ok 2 - GIT_EXTERNAL_DIFF environment
ok 53 - hunk header: cpp-operator-definition
ok 3 - GIT_EXTERNAL_DIFF environment should apply only to diff
ok 4 - GIT_EXTERNAL_DIFF environment and --no-ext-diff
ok 119 - cover letter auto
ok 54 - hunk header: cpp-skip-access-specifiers
ok 55 - hunk header: cpp-skip-comment-block
ok 56 - hunk header: cpp-skip-labels
ok 5 - typechange diff
ok 57 - hunk header: cpp-struct-definition
ok 120 - cover letter auto user override
# still have 5 known breakage(s)
# passed all remaining 115 test(s)
1..120
ok 58 - hunk header: cpp-struct-single-line
ok 6 - diff.external
ok 59 - hunk header: cpp-template-function-definition
ok 49 - invalid ref of the form stash@{n}, n >= N
ok 60 - hunk header: cpp-union-definition
ok 7 - diff.external should apply only to diff
*** t4021-format-patch-numbered.sh ***
ok 61 - hunk header: cpp-void-c-function
ok 8 - diff.external and --no-ext-diff
ok 62 - hunk header: custom1-pattern
ok 63 - hunk header: custom2-match-to-end-of-line
ok 9 - diff attribute
ok 10 - diff attribute should apply only to diff
ok 64 - hunk header: custom3-alternation-in-pattern
ok 11 - diff attribute and --no-ext-diff
ok 65 - hunk header: java-class-member-function
ok 66 - hunk header: perl-skip-end-of-heredoc
ok 12 - diff attribute
ok 1 - setup
ok 67 - hunk header: perl-skip-forward-decl
ok 13 - diff attribute should apply only to diff
ok 14 - diff attribute and --no-ext-diff
ok 2 - single patch defaults to no numbers
ok 68 - hunk header: perl-skip-sub-in-pod
ok 15 - GIT_EXTERNAL_DIFF trumps diff.external
ok 69 - hunk header: perl-sub-definition
ok 3 - multiple patch defaults to numbered
ok 70 - hunk header: perl-sub-definition-kr-brace
ok 4 - Use --numbered
# passed all 70 test(s)
1..70
ok 16 - attributes trump GIT_EXTERNAL_DIFF and diff.external
ok 17 - no diff with -diff
ok 5 - format.numbered = true
*** t4022-diff-rewrite.sh ***
ok 18 - force diff with "diff"
ok 6 - format.numbered && single patch
ok 7 - format.numbered && --no-numbered
ok 8 - format.numbered && --keep-subject
ok 19 - GIT_EXTERNAL_DIFF with more than one changed files
ok 9 - format.numbered = auto
ok 20 - GIT_EXTERNAL_DIFF path counter/total
ok 10 - format.numbered = auto && single patch
ok 1 - setup
ok 2 - detect rewrite
ok 11 - format.numbered = auto && --no-numbered
ok 50 - stash branch should not drop the stash if the branch exists
ok 3 - show deletion diff without -D
ok 12 - --start-number && --numbered
ok 21 - GIT_EXTERNAL_DIFF generates pretty paths
# passed all 12 test(s)
1..12
ok 4 - suppress deletion diff with -D
*** t4023-diff-rename-typechange.sh ***
ok 5 - show deletion diff with -B
ok 22 - external diff with autocrlf = true
ok 6 - suppress deletion diff with -B -D
ok 7 - prepare a file that ends with an incomplete line
ok 23 - diff --cached
ok 8 - rewrite the middle 90% of sequence file and terminate with newline
ok 24 - clean up crlf leftovers
ok 9 - confirm that sequence file is considered a rewrite
ok 10 - no newline at eof is on its own line without -B
ok 11 - no newline at eof is on its own line with -B
# passed all 11 test(s)
1..11
*** t4024-diff-optimize-common.sh ***
ok 25 - submodule diff
# passed all 25 test(s)
1..25
*** t4025-hunk-header.sh ***
ok 1 - setup
ok 51 - stash apply shows status same as git status (relative to current directory)
ok 1 - setup
ok 1 - setup
ok 2 - hunk header truncation with an overly long line
# passed all 2 test(s)
1..2
*** t4026-color.sh ***
ok 2 - cross renames to be detected for regular files
ok 2 - diff -U0
# passed all 2 test(s)
1..2
ok 3 - cross renames to be detected for typechange
*** t4027-diff-submodule.sh ***
ok 1 - reset
ok 2 - attribute before color name
ok 4 - moves and renames
# passed all 4 test(s)
1..4
ok 3 - color name before attribute
ok 4 - attr fg bg
ok 5 - fg attr bg
ok 6 - fg bg attr
*** t4028-format-patch-mime-headers.sh ***
ok 7 - fg bg attr...
ok 8 - long color specification
ok 9 - 256 colors
ok 10 - color too small
ok 11 - color too big
ok 12 - extra character after color number
ok 13 - extra character after color name
ok 14 - extra character after attribute
ok 15 - unknown color slots are ignored (diff)
ok 16 - unknown color slots are ignored (branch)
ok 1 - create commit with utf-8 body
ok 17 - unknown color slots are ignored (status)
# passed all 17 test(s)
1..17
ok 2 - patch has mime headers
ok 1 - setup
*** t4029-diff-trailing-space.sh ***
ok 2 - git diff --raw HEAD
ok 3 - patch has mime and extra headers
ok 3 - git diff-index --raw HEAD
# passed all 3 test(s)
1..3
ok 4 - git diff-files --raw
*** t4030-diff-textconv.sh ***
ok 5 - git diff HEAD
ok 52 - stash where working directory contains "HEAD" file
ok 6 - git diff HEAD with dirty submodule (work tree)
ok 53 - store called with invalid commit
ok 7 - git diff HEAD with dirty submodule (index)
ok 1 - diff honors config option, diff.suppressBlankEmpty
# passed all 1 test(s)
1..1
ok 1 - setup binary file with history
*** t4031-diff-rewrite-binary.sh ***
ok 2 - file is considered binary by porcelain
ok 8 - git diff HEAD with dirty submodule (untracked)
ok 3 - file is considered binary by plumbing
ok 4 - setup textconv filters
ok 1 - create binary file with changes
ok 5 - diff produces text
ok 9 - git diff HEAD with dirty submodule (work tree, refs match)
ok 2 - vanilla diff is binary
ok 3 - rewrite diff is binary
ok 4 - rewrite diff can show binary patch
ok 6 - show commit produces text
ok 5 - rewrite diff --numstat shows binary changes
ok 7 - diff-tree produces binary
ok 6 - diff --stat counts binary rewrite as 0 lines
ok 7 - setup textconv
ok 8 - log produces text
ok 9 - format-patch produces binary
ok 8 - rewrite diff respects textconv
# passed all 8 test(s)
1..8
*** t4032-diff-inter-hunk-context.sh ***
ok 10 - git diff HEAD with dirty submodule (work tree, refs match) [.git/config]
ok 10 - status -v produces text
ok 11 - show blob produces binary
ok 12 - show --textconv blob produces text
ok 13 - show --no-textconv blob produces binary
ok 1 - diff -U0, 1 common line: count hunks (2)
ok 2 - diff -U0, 1 common line: check output
ok 3 - diff -U0 --inter-hunk-context=0, 1 common line: count hunks (2)
ok 4 - diff -U0 --inter-hunk-context=0, 1 common line: check output
ok 5 - diff -U0 --inter-hunk-context=1, 1 common line: count hunks (1)
ok 6 - diff -U0 --inter-hunk-context=1, 1 common line: check output
ok 14 - grep-diff (-G) operates on textconv data (add)
ok 7 - diff -U0 --inter-hunk-context=2, 1 common line: count hunks (1)
ok 8 - diff -U0 --inter-hunk-context=2, 1 common line: check output
ok 9 - diff -U1, 1 common line: count hunks (1)
ok 54 - store updates stash ref and reflog
ok 11 - git diff HEAD with dirty submodule (work tree, refs match) [.gitmodules]
ok 15 - grep-diff (-G) operates on textconv data (modification)
ok 10 - diff -U0, 2 common lines: count hunks (2)
ok 11 - diff -U0 --inter-hunk-context=0, 2 common lines: count hunks (2)
ok 12 - diff -U0 --inter-hunk-context=1, 2 common lines: count hunks (2)
ok 12 - git diff HEAD with dirty submodule (index, refs match)
ok 13 - diff -U0 --inter-hunk-context=2, 2 common lines: count hunks (1)
ok 16 - pickaxe (-S) operates on textconv data (add)
ok 14 - diff -U1, 2 common lines: count hunks (1)
ok 15 - diff -U1, 3 common lines: count hunks (2)
ok 17 - pickaxe (-S) operates on textconv data (modification)
ok 16 - diff -U1 --inter-hunk-context=0, 3 common lines: count hunks (2)
ok 17 - diff -U1 --inter-hunk-context=1, 3 common lines: count hunks (1)
ok 13 - git diff HEAD with dirty submodule (untracked, refs match)
ok 18 - diffstat does not run textconv
ok 18 - diff -U1 --inter-hunk-context=2, 3 common lines: count hunks (1)
ok 19 - textconv does not act on symlinks
ok 19 - diff -U3, 9 common lines: count hunks (2)
# passed all 19 test(s)
1..19
ok 20 - diff -U3 --inter-hunk-context=2, 9 common lines: count hunks (2)
ok 14 - git diff HEAD with dirty submodule (untracked, refs match) [.git/config]
ok 21 - diff -U3 --inter-hunk-context=3, 9 common lines: count hunks (1)
*** t4033-diff-patience.sh ***
# passed all 21 test(s)
1..21
*** t4034-diff-words.sh ***
ok 1 - patience diff
ok 2 - patience diff output is valid
ok 3 - completely different files
ok 15 - git diff HEAD with dirty submodule (untracked, refs match) [.gitmodules]
# passed all 3 test(s)
1..3
ok 1 - setup
ok 2 - set up pre and post with runs of whitespace
*** t4035-diff-quiet.sh ***
ok 16 - git diff between submodule commits
ok 3 - word diff with runs of whitespace
ok 4 - --word-diff=porcelain
ok 5 - --word-diff=plain
ok 17 - git diff between submodule commits [.git/config]
ok 6 - --word-diff=plain --color
ok 7 - word diff without context
ok 8 - word diff with a regular expression
ok 55 - handle stash specification with spaces
ok 9 - set up a diff driver
# still have 2 known breakage(s)
# passed all remaining 53 test(s)
1..55
ok 1 - setup
ok 10 - option overrides .gitattributes
ok 2 - git diff-tree HEAD^ HEAD
ok 3 - git diff-tree HEAD^ HEAD -- a
ok 11 - use regex supplied by driver
ok 4 - git diff-tree HEAD^ HEAD -- b
ok 18 - git diff between submodule commits [.gitmodules]
ok 12 - set up diff.wordRegex option
ok 5 - echo HEAD | git diff-tree --stdin
ok 13 - command-line overrides config
ok 19 - git diff (empty submodule dir)
ok 6 - git diff-tree HEAD HEAD
*** t4036-format-patch-signer-mime.sh ***
ok 7 - git diff-files
ok 14 - command-line overrides config: --word-diff-regex
ok 20 - conflicted submodule setup
ok 8 - git diff-index --cached HEAD
ok 15 - .gitattributes override config
ok 16 - setup: remove diff driver regex
ok 9 - git diff-index --cached HEAD^
ok 21 - combined (empty submodule)
ok 17 - use configured regex
ok 10 - git diff-index --cached HEAD^
ok 18 - test parsing words for newline
ok 22 - combined (with submodule)
ok 19 - test when words are only removed at the end
# passed all 22 test(s)
1..22
ok 11 - git diff-tree -Stext HEAD^ HEAD -- b
ok 1 - setup
ok 20 - --word-diff=none
ok 12 - git diff-tree -Snot-found HEAD^ HEAD -- b
ok 21 - unset default driver
ok 13 - git diff-files
ok 2 - format normally
*** t4037-diff-r-t-dirs.sh ***
ok 22 - diff driver 'ada'
ok 3 - format with signoff without funny signer name
ok 14 - git diff-index --cached HEAD
ok 4 - format with non ASCII signer name
ok 23 - diff driver 'bibtex'
ok 15 - git diff, one file outside repo
ok 5 - attach and signoff do not duplicate mime headers
ok 16 - git diff, both files outside repo
# passed all 5 test(s)
1..5
ok 24 - diff driver 'cpp'
ok 17 - git diff --ignore-space-at-eol, one file outside repo
*** t4038-diff-combined.sh ***
ok 25 - diff driver 'csharp'
ok 18 - git diff --ignore-space-at-eol, both files outside repo
ok 26 - diff driver 'fortran'
ok 19 - git diff --ignore-all-space, one file outside repo
ok 27 - diff driver 'html'
ok 20 - git diff --ignore-all-space, both files outside repo
ok 1 - setup
ok 21 - git diff --quiet ignores stat-change only entries
ok 28 - diff driver 'java'
# passed all 21 test(s)
1..21
ok 2 - verify
# passed all 2 test(s)
1..2
ok 29 - diff driver 'matlab'
*** t4039-diff-assume-unchanged.sh ***
ok 30 - diff driver 'objc'
*** t4040-whitespace-status.sh ***
ok 31 - diff driver 'pascal'
ok 32 - diff driver 'perl'
ok 33 - diff driver 'php'
ok 34 - diff driver 'python'
ok 1 - setup
ok 1 - setup
ok 35 - diff driver 'ruby'
ok 2 - diff-index does not examine assume-unchanged entries
ok 3 - diff-files does not examine assume-unchanged entries
ok 2 - diff-tree --exit-code
ok 36 - diff driver 'tex'
ok 3 - diff-tree -b --exit-code
ok 37 - word-diff with diff.sbe
ok 4 - find-copies-harder is not confused by mode bits
ok 4 - diff-index --cached --exit-code
ok 38 - word-diff with no newline at EOF
# passed all 4 test(s)
1..4
ok 5 - diff-index -b -p --cached --exit-code
*** t4041-diff-submodule-option.sh ***
ok 6 - diff-index --exit-code
ok 1 - setup
ok 39 - setup history with two files
ok 7 - diff-index -b -p --exit-code
ok 8 - diff-files --exit-code
ok 40 - wordRegex for the first file does not apply to the second
ok 9 - diff-files -b -p --exit-code
# passed all 40 test(s)
1..40
ok 2 - check combined output (1)
*** t4042-diff-textconv-caching.sh ***
ok 10 - diff-files --diff-filter --quiet
ok 11 - diff-tree --diff-filter --quiet
# passed all 11 test(s)
1..11
ok 3 - check combined output (2)
*** t4043-diff-rename-binary.sh ***
ok 4 - diagnose truncated file
ok 1 - added submodule
ok 1 - setup
ok 2 - added submodule, set diff.submodule
ok 1 - prepare repository
ok 3 - --submodule=short overrides diff.submodule
ok 2 - move the files into a "sub" directory
ok 2 - first textconv works
ok 4 - diff.submodule does not affect plumbing
ok 3 - cached textconv produces same output
ok 3 - git show -C -C report renames
# passed all 3 test(s)
1..3
ok 4 - cached textconv does not run helper
*** t4044-diff-index-unique-abbrev.sh ***
ok 5 - modified submodule(forward)
ok 6 - modified submodule(forward)
ok 7 - modified submodule(forward) --submodule
ok 5 - changing textconv invalidates cache
ok 8 - modified submodule(forward) --submodule=short
ok 1 - setup
ok 6 - switching diff driver produces correct results
ok 2 - diff does not produce ambiguous index line
# passed all 2 test(s)
1..2
ok 9 - modified submodule(backward)
ok 7 - log notes cache and still use cache for -p
*** t4045-diff-relative.sh ***
# passed all 7 test(s)
1..7
*** t4046-diff-unmerged.sh ***
ok 10 - modified submodule(backward and forward)
ok 1 - setup
ok 2 - -p --relative=subdir/
ok 3 - -p --relative=subdir
ok 4 - -p --relative=sub
ok 5 - --numstat --relative=subdir/
ok 11 - typechanged submodule(submodule->blob), --cached
ok 1 - setup
ok 12 - typechanged submodule(submodule->blob)
ok 2 - diff-files -0
ok 6 - --numstat --relative=subdir
ok 3 - diff-files -1
ok 7 - --numstat --relative=sub
ok 4 - diff-files -2
ok 13 - typechanged submodule(submodule->blob)
ok 8 - --stat --relative=subdir/
ok 5 - diff-files -3
# passed all 5 test(s)
1..5
ok 9 - --stat --relative=subdir
ok 10 - --stat --relative=sub
*** t4047-diff-dirstat.sh ***
ok 11 - --raw --relative=subdir/
ok 12 - --raw --relative=subdir
ok 13 - --raw --relative=sub
# passed all 13 test(s)
1..13
*** t4048-diff-combined-binary.sh ***
ok 14 - nonexistent commit
ok 15 - typechanged submodule(blob->submodule)
ok 16 - submodule is up to date
ok 17 - submodule contains untracked content
ok 18 - submodule contains untracked content (untracked ignored)
ok 19 - submodule contains untracked content (dirty ignored)
ok 20 - submodule contains untracked content (all ignored)
ok 21 - submodule contains untracked and modifed content
ok 1 - setup binary merge conflict
ok 22 - submodule contains untracked and modifed content (untracked ignored)
ok 23 - submodule contains untracked and modifed content (dirty ignored)
ok 2 - diff -m indicates binary-ness
ok 5 - setup for --cc --raw
ok 24 - submodule contains untracked and modifed content (all ignored)
ok 3 - diff -c indicates binary-ness
ok 6 - check --cc --raw with four trees
ok 25 - submodule contains modifed content
ok 4 - diff --cc indicates binary-ness
ok 7 - check --cc --raw with forty trees
ok 1 - setup
ok 26 - submodule is modified
ok 27 - modified submodule contains untracked content
ok 2 - sanity check setup (--numstat)
ok 28 - modified submodule contains untracked content (untracked ignored)
ok 29 - modified submodule contains untracked content (dirty ignored)
ok 8 - setup combined ignore spaces
ok 3 - various ways to misspell --dirstat
ok 30 - modified submodule contains untracked content (all ignored)
ok 9 - check combined output (no ignore space)
ok 31 - modified submodule contains untracked and modifed content
ok 4 - vanilla --dirstat
ok 10 - check combined output (ignore space at eol)
ok 32 - modified submodule contains untracked and modifed content (untracked ignored)
ok 5 - setup non-binary with binary attribute
ok 33 - modified submodule contains untracked and modifed content (dirty ignored)
ok 34 - modified submodule contains untracked and modifed content (all ignored)
ok 6 - diff -m respects binary attribute
ok 11 - check combined output (ignore space change)
ok 5 - vanilla -X
ok 7 - diff -c respects binary attribute
ok 35 - modified submodule contains modifed content
ok 8 - diff --cc respects binary attribute
ok 9 - setup textconv attribute
ok 12 - check combined output (ignore all spaces)
ok 36 - deleted submodule
ok 6 - explicit defaults: --dirstat=changes,noncumulative,3
ok 10 - diff -m respects textconv attribute
ok 7 - explicit defaults: -Xchanges,noncumulative,3
ok 11 - diff -c respects textconv attribute
ok 12 - diff --cc respects textconv attribute
ok 37 - multiple submodules
ok 13 - diff-tree plumbing does not respect textconv
ok 38 - path filter
ok 13 - combine diff coalesce simple
ok 8 - later options override earlier options:
ok 39 - given commit
ok 14 - diff --cc respects textconv on worktree file
ok 40 - given commit --submodule
# passed all 14 test(s)
1..14
ok 9 - non-defaults in config overridden by explicit defaults on command line
*** t4049-diff-stat-count.sh ***
ok 41 - given commit --submodule=short
ok 42 - setup .git file for sm2
ok 43 - diff --submodule with .git file
ok 10 - --dirstat=0
ok 1 - setup
ok 11 - -X0
ok 2 - mode-only change show as a 0-line change
ok 14 - combine diff coalesce tricky
ok 12 - diff.dirstat=0
ok 3 - binary changes do not count in lines
ok 13 - --dirstat=0 --cumulative
ok 4 - exclude unmerged entries from total file count
# passed all 4 test(s)
1..4
*** t4050-diff-histogram.sh ***
ok 44 - diff --submodule with objects referenced by alternates
ok 14 - --dirstat=0,cumulative
# passed all 44 test(s)
1..44
ok 15 - -X0,cumulative
not ok 15 - combine diff coalesce three parents # TODO known breakage
*** t4051-diff-function-context.sh ***
ok 1 - histogram diff
ok 2 - histogram diff output is valid
ok 16 - diff.dirstat=0,cumulative
ok 3 - completely different files
# passed all 3 test(s)
1..3
*** t4052-stat-output.sh ***
ok 17 - diff.dirstat=0 & --dirstat=cumulative
ok 1 - setup
ok 2 - diff -U0 -W
ok 18 - --dirstat-by-file
ok 3 - diff -W
# passed all 3 test(s)
1..3
ok 19 - --dirstat=files
ok 16 - combine diff missing delete bug
*** t4053-diff-no-index.sh ***
ok 1 - preparation
ok 20 - diff.dirstat=files
ok 2 - format-patch: small change with long name gives more space to the name
ok 3 - format-patch --stat=width: a long name is given more room when the bar is short
ok 1 - setup
ok 21 - --dirstat-by-file=10
ok 4 - format-patch --stat-width=width with long name
ok 2 - git diff --no-index directories
ok 3 - git diff --no-index relative path outside repo
ok 5 - format-patch --stat=...,name-width with long name
ok 4 - git diff --no-index with broken index
ok 5 - git diff outside repo with broken index
ok 6 - format-patch --stat-name-width with long name
ok 22 - --dirstat=files,10
ok 6 - git diff --no-index executed outside repo gives correct error message
# passed all 6 test(s)
1..6
ok 17 - combine diff gets tree sorting right
# still have 1 known breakage(s)
# passed all remaining 16 test(s)
1..17
ok 7 - diff: small change with long name gives more space to the name
*** t4054-diff-bogus-tree.sh ***
ok 8 - diff --stat=width: a long name is given more room when the bar is short
ok 23 - diff.dirstat=10,files
ok 9 - diff --stat-width=width with long name
ok 10 - diff --stat=...,name-width with long name
ok 1 - create bogus tree
ok 11 - diff --stat-name-width with long name
*** t4055-diff-context.sh ***
ok 2 - create tree with matching file
ok 12 - show: small change with long name gives more space to the name
ok 3 - raw diff shows null sha1 (addition)
ok 24 - --dirstat-by-file --cumulative
ok 13 - show --stat=width: a long name is given more room when the bar is short
ok 4 - raw diff shows null sha1 (removal)
ok 5 - raw diff shows null sha1 (modification)
ok 6 - raw diff shows null sha1 (other direction)
ok 14 - show --stat-width=width with long name
ok 7 - raw diff shows null sha1 (reverse)
ok 25 - --dirstat=files,cumulative
ok 15 - show --stat=...,name-width with long name
ok 8 - raw diff shows null sha1 (index)
ok 9 - patch fails due to bogus sha1 (addition)
ok 16 - show --stat-name-width with long name
ok 10 - patch fails due to bogus sha1 (removal)
ok 11 - patch fails due to bogus sha1 (modification)
ok 17 - log: small change with long name gives more space to the name
ok 12 - patch fails due to bogus sha1 (other direction)
ok 26 - diff.dirstat=cumulative,files
ok 1 - setup
ok 13 - patch fails due to bogus sha1 (reverse)
ok 14 - patch fails due to bogus sha1 (index)
ok 18 - log --stat=width: a long name is given more room when the bar is short
# passed all 14 test(s)
1..14
ok 2 - the default number of context lines is 3
ok 19 - log --stat-width=width with long name
*** t4056-diff-order.sh ***
ok 27 - --dirstat=files,cumulative,10
ok 20 - log --stat=...,name-width with long name
ok 3 - diff.context honored by "log"
ok 21 - log --stat-name-width with long name
ok 4 - The -U option overrides diff.context
ok 28 - diff.dirstat=10,cumulative,files
ok 5 - diff.context honored by "diff"
ok 6 - plumbing not affected
ok 29 - --dirstat=files,cumulative,16.7
ok 7 - non-integer config parsing
ok 22 - preparation for big change tests
ok 1 - setup
ok 8 - negative integer config parsing
ok 2 - no order (=tree object order)
ok 23 - format-patch ignores COLUMNS (big change)
ok 9 - -U0 is valid, so is diff.context=0
ok 30 - diff.dirstat=16.7,cumulative,files
ok 3 - missing orderfile
# passed all 9 test(s)
1..9
ok 24 - format-patch --graph ignores COLUMNS (big change)
ok 4 - unreadable orderfile
ok 5 - orderfile using option (1)
*** t4057-diff-combined-paths.sh ***
ok 25 - diff respects COLUMNS (big change)
ok 26 - show respects COLUMNS (big change)
ok 31 - diff.dirstat=16.70,cumulative,files
ok 6 - orderfile is fifo (1)
ok 7 - orderfile using config (1)
ok 27 - show --graph respects COLUMNS (big change)
ok 8 - cancelling configured orderfile (1)
ok 28 - log respects COLUMNS (big change)
ok 9 - orderfile using option (2)
ok 32 - --dirstat=files,cumulative,27.2
ok 29 - log --graph respects COLUMNS (big change)
ok 10 - orderfile is fifo (2)
ok 11 - orderfile using config (2)
ok 30 - format-patch ignores not enough COLUMNS (big change)
ok 12 - cancelling configured orderfile (2)
ok 33 - --dirstat=files,cumulative,27.09
ok 31 - format-patch --graph ignores not enough COLUMNS (big change)
ok 32 - diff respects not enough COLUMNS (big change)
ok 33 - show respects not enough COLUMNS (big change)
ok 34 - --dirstat=lines
ok 34 - show --graph respects not enough COLUMNS (big change)
ok 35 - log respects not enough COLUMNS (big change)
ok 13 - setup for testing combine-diff order
ok 36 - log --graph respects not enough COLUMNS (big change)
ok 14 - combine-diff: no order (=tree object order)
ok 35 - diff.dirstat=lines
ok 15 - combine-diff: orderfile using option (1)
ok 37 - format-patch ignores statGraphWidth config
ok 16 - combine-diff: orderfile using option (2)
# passed all 16 test(s)
1..16
ok 38 - format-patch --graph ignores statGraphWidth config
*** t4100-apply-stat.sh ***
ok 39 - diff respects statGraphWidth config
ok 36 - --dirstat=lines,0
ok 40 - show respects statGraphWidth config
ok 1 - trivial merge - combine-diff empty
ok 41 - show --graph respects statGraphWidth config
ok 42 - log respects statGraphWidth config
ok 37 - diff.dirstat=0,lines
ok 43 - log --graph respects statGraphWidth config
ok 38 - --dirstat=future_param,lines,0 should fail loudly
ok 1 - rename
ok 44 - format-patch --stat=width with big change
ok 39 - --dirstat=dummy1,cumulative,2dummy should report both unrecognized parameters
ok 2 - rename with recount
ok 3 - copy
ok 45 - format-patch --stat-width=width with big change
ok 4 - copy with recount
ok 46 - format-patch --stat-graph-width with big change
ok 5 - rewrite
ok 6 - rewrite with recount
ok 47 - format-patch --stat-width=width --graph with big change
ok 7 - mode
ok 40 - diff.dirstat=future_param,0,lines should warn, but still work
ok 48 - format-patch --stat-graph-width --graph with big change
# passed all 40 test(s)
1..40
ok 8 - mode with recount
ok 49 - diff --stat=width with big change
ok 9 - non git (1)
ok 50 - diff --stat-width=width with big change
ok 10 - non git (1) with recount
ok 2 - only one trully conflicting path
ok 11 - non git (2)
*** t4101-apply-nonl.sh ***
ok 51 - diff --stat-graph-width with big change
ok 12 - non git (2) with recount
ok 13 - non git (3)
ok 52 - show --stat=width with big change
ok 14 - non git (3) with recount
ok 53 - show --stat-width=width with big change
ok 15 - incomplete (1)
ok 16 - incomplete (1) with recount
ok 54 - show --stat-graph-width with big change
ok 17 - incomplete (2)
ok 55 - show --stat-width=width --graph with big change
ok 18 - incomplete (2) with recount
ok 56 - show --stat-graph-width --graph with big change
ok 1 - apply diff between 0 and 1
# passed all 18 test(s)
1..18
ok 2 - apply diff between 0 and 2
ok 57 - log --stat=width with big change
*** t4102-apply-rename.sh ***
ok 3 - apply diff between 0 and 3
ok 58 - log --stat-width=width with big change
ok 4 - apply diff between 1 and 0
ok 59 - log --stat-graph-width with big change
ok 5 - apply diff between 1 and 2
ok 3 - merge introduces new file
ok 6 - apply diff between 1 and 3
ok 60 - log --stat-width=width --graph with big change
ok 7 - apply diff between 2 and 0
ok 61 - log --stat-graph-width --graph with big change
ok 1 - setup
ok 8 - apply diff between 2 and 1
ok 2 - apply
ok 9 - apply diff between 2 and 3
ok 62 - preparation for long filename tests
ok 10 - apply diff between 3 and 0
ok 3 - validate
ok 63 - format-patch --stat=width with big change is more balanced
ok 4 - apply reverse
ok 11 - apply diff between 3 and 1
ok 12 - apply diff between 3 and 2
ok 64 - format-patch --stat=width --graph with big change is balanced
ok 5 - apply copy
# passed all 12 test(s)
1..12
# passed all 5 test(s)
1..5
*** t4103-apply-binary.sh ***
*** t4104-apply-boundary.sh ***
ok 65 - diff --stat=width with big change is more balanced
ok 66 - show --stat=width with big change is more balanced
ok 4 - merge removed a file
ok 67 - show --stat=width --graph with big change is balanced
# passed all 4 test(s)
1..4
ok 68 - log --stat=width with big change is more balanced
ok 69 - log --stat=width --graph with big change is balanced
*** t4105-apply-fuzz.sh ***
ok 70 - format-patch ignores COLUMNS (long filename)
ok 71 - format-patch --graph ignores COLUMNS (long filename)
ok 72 - diff respects COLUMNS (long filename)
ok 73 - show respects COLUMNS (long filename)
ok 74 - show --graph respects COLUMNS (long filename)
ok 1 - setup
ok 75 - log respects COLUMNS (long filename)
ok 2 - unmodified patch
ok 1 - setup
ok 76 - log --graph respects COLUMNS (long filename)
ok 3 - minus offset
ok 2 - apply add-a-patch with context
ok 77 - format-patch ignores prefix greater than COLUMNS (big change)
ok 4 - plus offset
ok 3 - apply add-z-patch with context
ok 78 - format-patch --graph ignores prefix greater than COLUMNS (big change)
ok 5 - big offset
ok 79 - diff respects prefix greater than COLUMNS (big change)
ok 4 - apply insert-a-patch with context
ok 6 - fuzz with no offset
ok 80 - show respects prefix greater than COLUMNS (big change)
ok 7 - fuzz with minus offset
ok 5 - apply mod-a-patch with context
ok 81 - show --graph respects prefix greater than COLUMNS (big change)
ok 8 - fuzz with plus offset
ok 6 - apply mod-z-patch with context
ok 82 - log respects prefix greater than COLUMNS (big change)
ok 1 - setup
ok 83 - log --graph respects prefix greater than COLUMNS (big change)
ok 9 - fuzz with big offset
ok 7 - apply del-a-patch with context
# passed all 9 test(s)
1..9
ok 2 - stat binary diff -- should not fail.
*** t4106-apply-stdin.sh ***
ok 8 - apply del-z-patch with context
ok 3 - stat binary -p0 diff -- should not fail.
ok 84 - merge --stat respects COLUMNS (big change)
ok 9 - apply add-a-patch without context
ok 4 - stat binary diff (copy) -- should not fail.
ok 10 - apply add-z-patch without context
ok 5 - check binary diff -- should fail.
ok 85 - merge --stat respects COLUMNS (long filename)
ok 6 - check binary diff (copy) -- should fail.
ok 11 - apply insert-a-patch without context
# passed all 85 test(s)
1..85
ok 7 - check incomplete binary diff with replacement -- should fail.
ok 1 - setup
ok 12 - apply mod-a-patch without context
*** t4107-apply-ignore-whitespace.sh ***
ok 8 - check incomplete binary diff with replacement (copy) -- should fail.
ok 2 - git apply --numstat - < patch
ok 13 - apply mod-z-patch without context
ok 3 - git apply --numstat - < patch patch
# passed all 3 test(s)
1..3
ok 9 - check binary diff with replacement.
*** t4108-apply-threeway.sh ***
ok 14 - apply del-a-patch without context
ok 10 - check binary diff with replacement (copy).
ok 15 - apply del-z-patch without context
ok 11 - apply binary diff -- should fail.
ok 1 - file creation
ok 2 - patch2 fails (retab)
ok 16 - apply non-git add-a-patch without context
ok 3 - patch2 applies with --ignore-whitespace
ok 4 - patch2 reverse applies with --ignore-space-change
ok 12 - apply binary diff -- should fail.
ok 17 - apply non-git add-z-patch without context
ok 5 - patch2 applies (apply.ignorewhitespace = change)
ok 6 - patch3 fails (missing string at EOL)
ok 7 - patch4 fails (missing EOL at EOF)
ok 8 - patch5 fails (leading whitespace differences matter)
ok 13 - apply binary diff (copy) -- should fail.
ok 9 - re-create file (with --ignore-whitespace)
ok 18 - apply non-git insert-a-patch without context
ok 10 - patch5 fails (--no-ignore-whitespace)
# passed all 10 test(s)
1..10
ok 1 - setup
ok 19 - apply non-git mod-a-patch without context
ok 14 - apply binary diff (copy) -- should fail.
*** t4109-apply-multifrag.sh ***
ok 20 - apply non-git mod-z-patch without context
ok 15 - apply binary diff with full-index
ok 2 - apply without --3way
ok 21 - apply non-git del-a-patch without context
ok 16 - apply binary diff with full-index (copy)
ok 22 - apply non-git del-z-patch without context
ok 1 - git apply (1)
ok 17 - apply full-index binary diff in new repo
ok 2 - git apply (2)
ok 3 - git apply (3)
ok 18 - apply binary diff without replacement.
ok 23 - two lines
# passed all 3 test(s)
1..3
*** t4110-apply-scan.sh ***
ok 24 - apply patch with 3 context lines matching at end
# passed all 24 test(s)
1..24
ok 19 - apply binary diff without replacement (copy).
ok 3 - apply with --3way
*** t4111-apply-subdir.sh ***
ok 20 - apply binary diff.
ok 1 - git apply scan
# passed all 1 test(s)
1..1
*** t4112-apply-renames.sh ***
ok 21 - apply binary diff (copy).
ok 1 - setup
ok 2 - setup: subdir
ok 4 - apply with --3way with rerere enabled
ok 22 - apply binary -p0 diff
# passed all 22 test(s)
1..22
ok 1 - check rename/copy patch
*** t4113-apply-ending.sh ***
ok 2 - apply rename/copy patch
ok 3 - apply from subdir of toplevel
# passed all 2 test(s)
1..2
*** t4114-apply-typechange.sh ***
ok 1 - setup
ok 2 - apply at the end
ok 5 - apply -3 with add/add conflict setup
ok 3 - apply at the beginning
# passed all 3 test(s)
1..3
ok 4 - apply --cached from subdir of toplevel
*** t4115-apply-symlink.sh ***
ok 6 - apply -3 with add/add conflict
ok 7 - apply -3 with add/add conflict (dirty working tree)
# passed all 7 test(s)
1..7
*** t4116-apply-reverse.sh ***
ok 1 - setup
ok 2 - apply symlink patch
ok 1 - setup repository and commits
ok 3 - apply --index symlink patch
# passed all 3 test(s)
1..3
*** t4117-apply-reject.sh ***
ok 1 - setup
ok 2 - file renamed from foo to foo/baz
ok 5 - apply --index from subdir of toplevel
ok 6 - apply half-broken patch from subdir of toplevel
ok 3 - file renamed from foo/baz to foo
ok 2 - apply in forward
ok 7 - apply from .git dir
ok 4 - directory becomes file
ok 8 - apply from subdir of .git dir
ok 3 - apply in reverse
ok 5 - file becomes directory
ok 6 - file becomes symlink
ok 1 - setup
ok 4 - setup separate repository lacking postimage
ok 7 - symlink becomes file
ok 2 - apply --reject is incompatible with --3way
ok 9 - apply --cached from .git dir
ok 5 - apply in forward without postimage
ok 3 - apply without --reject should fail
ok 4 - apply without --reject should fail
ok 8 - binary file becomes symlink
ok 6 - apply in reverse without postimage
ok 5 - apply with --reject should fail but update the file
ok 7 - reversing a whitespace introduction
ok 9 - symlink becomes binary file
ok 6 - apply with --reject should fail but update the file
# passed all 7 test(s)
1..7
ok 7 - the same test with --verbose
ok 10 - symlink becomes directory
*** t4118-apply-empty-context.sh ***
ok 8 - apply cleanly with --verbose
# passed all 8 test(s)
1..8
ok 11 - directory becomes symlink
# passed all 11 test(s)
1..11
*** t4119-apply-config.sh ***
ok 10 - apply --cached from subdir of .git dir
# passed all 10 test(s)
1..10
*** t4120-apply-popt.sh ***
*** t4121-apply-diffs.sh ***
ok 1 - setup
ok 1 - setup
ok 2 - apply --numstat
ok 3 - apply --apply
# passed all 3 test(s)
1..3
ok 2 - apply --whitespace=strip
ok 1 - setup
*** t4122-apply-symlink-inside.sh ***
ok 2 - apply git diff with -p2
ok 3 - apply --whitespace=strip from config
ok 3 - apply with too large -p
ok 4 - apply (-p2) traditional diff with funny filenames
ok 5 - apply with too large -p and fancy filename
ok 4 - apply --whitespace=strip in subdir
ok 1 - setup
ok 6 - apply (-p2) diff, mode change only
ok 2 - check if contextually independent diffs for the same file apply
ok 7 - file mode was changed
# passed all 2 test(s)
1..2
ok 5 - apply --whitespace=strip from config in subdir
ok 8 - apply (-p2) diff, rename
*** t4123-apply-shrink.sh ***
# passed all 8 test(s)
1..8
ok 6 - same in subdir but with traditional patch input
*** t4124-apply-ws-rule.sh ***
ok 7 - same but with traditional patch input of depth 1
ok 1 - setup
ok 8 - same but with traditional patch input of depth 2
ok 2 - apply
ok 1 - setup
ok 1 - setup
ok 2 - apply should fail gracefully
# passed all 2 test(s)
1..2
ok 9 - same but with traditional patch input of depth 1
ok 2 - whitespace=nowarn, default rule
*** t4125-apply-ws-fuzz.sh ***
ok 3 - whitespace=warn, default rule
ok 4 - whitespace=error-all, default rule
ok 3 - check result
# passed all 3 test(s)
1..3
ok 10 - same but with traditional patch input of depth 2
ok 5 - whitespace=error-all, no rule
ok 6 - whitespace=error-all, no rule (attribute)
*** t4126-apply-empty.sh ***
ok 11 - in subdir with traditional patch input
# passed all 11 test(s)
1..11
*** t4127-apply-same-fn.sh ***
ok 7 - spaces inserted by tab-in-indent
ok 8 - rule=-trailing,-space,-indent,-tab
ok 1 - setup
ok 1 - setup
ok 9 - rule=-trailing,-space,-indent,-tab,tabwidth=16
ok 2 - nofix
ok 1 - setup
ok 2 - apply empty
ok 3 - withfix (forward)
ok 10 - rule=-trailing,-space,-indent,-tab (attributes)
ok 11 - rule=-trailing,-space,-indent,-tab,tabwidth=16 (attributes)
ok 3 - apply --index empty
ok 2 - apply same filename with independent changes
ok 4 - withfix (backward)
# passed all 4 test(s)
1..4
ok 4 - apply create
*** t4128-apply-root.sh ***
ok 12 - rule=-trailing,-space,-indent,tab
ok 5 - apply --index create
# passed all 5 test(s)
1..5
*** t4129-apply-samemode.sh ***
ok 13 - rule=-trailing,-space,-indent,tab,tabwidth=16
ok 3 - apply same filename with overlapping changes
ok 14 - rule=-trailing,-space,-indent,tab (attributes)
ok 1 - setup
ok 15 - rule=-trailing,-space,-indent,tab,tabwidth=16 (attributes)
ok 2 - apply --directory -p (1)
ok 4 - apply same new filename after rename
ok 1 - setup
ok 3 - apply --directory -p (2)
ok 16 - rule=-trailing,-space,indent,-tab
ok 2 - same mode (no index)
ok 4 - apply --directory (new file)
ok 3 - same mode (with index)
ok 17 - rule=-trailing,-space,indent,-tab,tabwidth=16
ok 5 - apply same old filename after rename -- should fail.
ok 5 - apply --directory -p (new file)
ok 4 - same mode (index only)
ok 6 - apply --directory (delete file)
ok 18 - rule=-trailing,-space,indent,-tab (attributes)
ok 5 - mode update (no index)
ok 7 - apply --directory (quoted filename)
ok 6 - mode update (with index)
# passed all 7 test(s)
1..7
ok 19 - rule=-trailing,-space,indent,-tab,tabwidth=16 (attributes)
*** t4130-apply-criss-cross-rename.sh ***
ok 7 - mode update (index only)
# passed all 7 test(s)
1..7
*** t4131-apply-fake-ancestor.sh ***
ok 20 - rule=-trailing,space,-indent,-tab
ok 6 - apply A->B (rename), C->A (rename), A->A -- should pass.
# passed all 6 test(s)
1..6
*** t4132-apply-removal.sh ***
ok 21 - rule=-trailing,space,-indent,-tab,tabwidth=16
ok 1 - setup
ok 22 - rule=-trailing,space,-indent,-tab (attributes)
ok 2 - criss-cross rename
ok 3 - diff -M -B
ok 23 - rule=-trailing,space,-indent,-tab,tabwidth=16 (attributes)
ok 4 - apply
ok 1 - setup
ok 24 - rule=-trailing,space,-indent,tab
ok 5 - criss-cross rename
ok 2 - test addEast.patch
ok 1 - setup
ok 6 - diff -M -B
ok 3 - test addGMT.patch
ok 7 - apply
# passed all 7 test(s)
1..7
ok 25 - rule=-trailing,space,-indent,tab,tabwidth=16
ok 4 - test addWest.patch
ok 2 - apply --build-fake-ancestor
*** t4133-apply-filenames.sh ***
ok 26 - rule=-trailing,space,-indent,tab (attributes)
ok 5 - test createEast.patch
ok 3 - apply --build-fake-ancestor in a subdirectory
ok 6 - test createGMT.patch
# passed all 3 test(s)
1..3
ok 27 - rule=-trailing,space,-indent,tab,tabwidth=16 (attributes)
ok 1 - setup
*** t4134-apply-submodule.sh ***
ok 2 - apply diff with inconsistent filenames in headers
ok 7 - test createWest.patch
# passed all 2 test(s)
1..2
*** t4135-apply-weird-filenames.sh ***
ok 28 - rule=-trailing,space,indent,-tab
ok 8 - test emptyEast.patch
ok 9 - test emptyGMT.patch
ok 1 - setup
ok 2 - removing a submodule also removes all leading subdirectories
ok 29 - rule=-trailing,space,indent,-tab,tabwidth=16
# passed all 2 test(s)
1..2
ok 10 - test emptyWest.patch
*** t4136-apply-check.sh ***
ok 11 - test removeEast.patch
ok 30 - rule=-trailing,space,indent,-tab (attributes)
ok 1 - setup
ok 12 - test removeGMT.patch
ok 13 - test removeWest.patch
ok 31 - rule=-trailing,space,indent,-tab,tabwidth=16 (attributes)
ok 2 - plain, git-style file creation patch
ok 14 - test removeWest2.patch
# passed all 14 test(s)
1..14
ok 32 - rule=trailing,-space,-indent,-tab
ok 3 - plain, traditional patch
*** t4137-apply-submodule.sh ***
ok 1 - setup
ok 2 - apply --check exits non-zero with unrecognized input
# passed all 2 test(s)
1..2
*** t4150-am.sh ***
ok 33 - rule=trailing,-space,-indent,-tab,tabwidth=16
ok 4 - plain, traditional file creation patch
ok 5 - with spaces, git-style file creation patch
ok 34 - rule=trailing,-space,-indent,-tab (attributes)
ok 1 - setup: messages
ok 35 - rule=trailing,-space,-indent,-tab,tabwidth=16 (attributes)
ok 6 - with spaces, traditional patch
ok 7 - with spaces, traditional file creation patch
ok 36 - rule=trailing,-space,-indent,tab
ok 8 - with tab, git-style file creation patch
ok 37 - rule=trailing,-space,-indent,tab,tabwidth=16
ok 9 - with tab, traditional patch
ok 38 - rule=trailing,-space,-indent,tab (attributes)
ok 10 - with tab, traditional file creation patch
ok 39 - rule=trailing,-space,-indent,tab,tabwidth=16 (attributes)
ok 11 - with backslash, git-style file creation patch
ok 40 - rule=trailing,-space,indent,-tab
ok 12 - with backslash, traditional patch
ok 41 - rule=trailing,-space,indent,-tab,tabwidth=16
ok 13 - with backslash, traditional file creation patch
ok 2 - setup
ok 42 - rule=trailing,-space,indent,-tab (attributes)
ok 14 - with quote, git-style file creation patch
not ok 15 - with quote, traditional patch # TODO known breakage
ok 43 - rule=trailing,-space,indent,-tab,tabwidth=16 (attributes)
ok 44 - rule=trailing,space,-indent,-tab
ok 16 - with quote, traditional file creation patch
ok 45 - rule=trailing,space,-indent,-tab,tabwidth=16
ok 17 - whitespace-damaged traditional patch
ok 46 - rule=trailing,space,-indent,-tab (attributes)
ok 18 - traditional patch with colon in timezone
ok 47 - rule=trailing,space,-indent,-tab,tabwidth=16 (attributes)
ok 19 - traditional, whitespace-damaged, colon in timezone
# still have 1 known breakage(s)
# passed all remaining 18 test(s)
1..19
ok 3 - am applies patch correctly
ok 48 - rule=trailing,space,-indent,tab
*** t4151-am-abort.sh ***
ok 49 - rule=trailing,space,-indent,tab,tabwidth=16
ok 50 - rule=trailing,space,-indent,tab (attributes)
ok 51 - rule=trailing,space,-indent,tab,tabwidth=16 (attributes)
ok 52 - rule=trailing,space,indent,-tab
ok 53 - rule=trailing,space,indent,-tab,tabwidth=16
ok 1 - setup
ok 54 - rule=trailing,space,indent,-tab (attributes)
ok 4 - am applies patch e-mail not in a mbox
ok 55 - rule=trailing,space,indent,-tab,tabwidth=16 (attributes)
ok 56 - trailing whitespace & no newline at the end of file
ok 57 - blank at EOF with --whitespace=fix (1)
ok 58 - blank at EOF with --whitespace=fix (2)
ok 59 - blank at EOF with --whitespace=fix (3)
ok 60 - blank at end of hunk, not at EOF with --whitespace=fix
ok 61 - blank at EOF with --whitespace=warn
ok 5 - am applies patch e-mail not in a mbox with CRLF
ok 62 - blank at EOF with --whitespace=error
ok 2 - am stops at a patch that does not apply
ok 63 - blank but not empty at EOF
ok 64 - applying beyond EOF requires one non-blank context line
ok 65 - tons of blanks at EOF should not apply
ok 66 - missing blank line at end with --whitespace=fix
ok 3 - am --skip continue after failed am
ok 67 - two missing blank lines at end with --whitespace=fix
ok 6 - am applies patch e-mail with preceding whitespace
ok 7 - setup: new author and committer
ok 68 - missing blank line at end, insert before end, --whitespace=fix
ok 69 - shrink file with tons of missing blanks at end of file
ok 4 - am --abort goes back after failed am
ok 70 - missing blanks at EOF must only match blank lines
ok 71 - missing blank line should match context line with spaces
ok 1 - apply_index: added submodule creates empty directory
ok 72 - same, but with the --ignore-space-option
ok 73 - same, but with CR-LF line endings && cr-at-eol set
ok 74 - same, but with CR-LF line endings && cr-at-eol unset
ok 75 - whitespace=fix to expand
ok 76 - whitespace check skipped for excluded paths
# passed all 76 test(s)
1..76
ok 8 - am changes committer and keeps author
*** t4152-am-subjects.sh ***
ok 1 - setup baseline commit
ok 2 - create patches with short subject
ok 5 - am -3 stops at a patch that does not apply
ok 3 - create patches with long subject
ok 4 - create patches with multiline subject
ok 9 - am --signoff adds Signed-off-by: line
ok 10 - am stays in branch
ok 2 - apply_index: added submodule leaves existing empty directory alone
ok 6 - am -3 --skip continue after failed am -3
ok 5 - short subject preserved (format-patch | am)
ok 3 - apply_index: added submodule doesn't remove untracked unignored file with same name
ok 7 - am --abort goes back after failed am -3
ok 11 - am --signoff does not add Signed-off-by: line if already there
ok 12 - am without --keep removes Re: and [PATCH] stuff
ok 6 - short subject preserved (format-patch -k | am)
ok 13 - am --keep really keeps the subject
ok 8 - am --abort will keep the local commits intact
# passed all 8 test(s)
1..8
ok 7 - short subject preserved (format-patch -k | am -k)
*** t4200-rerere.sh ***
ok 1 - setup
ok 2 - nothing recorded without rerere
ok 14 - am --keep-non-patch really keeps the non-patch part
ok 8 - long subject preserved (format-patch | am)
ok 4 - apply_index: replace tracked file with submodule creates empty directory
ok 3 - activate rerere, old style (conflicting merge)
ok 4 - rerere.enabled works, too
ok 5 - set up rr-cache
ok 6 - rr-cache looks sane
ok 7 - rerere diff
ok 8 - rerere status
ok 9 - first postimage wins
ok 10 - rerere updates postimage timestamp
ok 9 - long subject preserved (format-patch -k | am)
ok 11 - rerere clear
ok 12 - set up for garbage collection tests
ok 13 - gc preserves young or recently used records
ok 14 - old records rest in peace
ok 15 - am -3 falls back to 3-way merge
ok 15 - setup: file2 added differently in two branches
ok 10 - long subject preserved (format-patch -k | am -k)
ok 16 - resolution was recorded properly
ok 5 - apply_index: replace directory with submodule
ok 17 - rerere.autoupdate
ok 18 - merge --rerere-autoupdate
ok 11 - multiline subject unwrapped (format-patch | am)
ok 19 - merge --no-rerere-autoupdate
ok 16 - am -3 -p0 can read --no-prefix patch
ok 20 - set up an unresolved merge
ok 21 - explicit rerere
ok 22 - explicit rerere with autoupdate
ok 12 - multiline subject unwrapped (format-patch -k | am)
ok 23 - explicit rerere --rerere-autoupdate overrides
ok 17 - am can rename a file
ok 24 - rerere --no-no-rerere-autoupdate
ok 25 - rerere -h
# passed all 25 test(s)
1..25
*** t4201-shortlog.sh ***
ok 6 - apply_index: removed submodule leaves submodule directory and its contents in place
ok 13 - multiline subject preserved (format-patch -k | am -k)
# passed all 13 test(s)
1..13
*** t4202-log.sh ***
ok 18 - am -3 can rename a file
ok 1 - setup
ok 2 - default output format
ok 1 - setup
ok 2 - pretty
ok 3 - pretty format
ok 3 - pretty (tformat)
ok 4 - pretty (shortcut)
ok 4 - --abbrev
ok 5 - format
ok 6 - format %w(11,1,2)
ok 7 - format %w(,1,2)
ok 5 - output from user-defined format is re-wrapped
ok 8 - oneline
ok 6 - shortlog wrapping
ok 9 - diff-filter=A
ok 7 - shortlog from non-git directory
ok 10 - diff-filter=M
ok 11 - diff-filter=D
ok 8 - shortlog should add newline when input line matches wraplen
ok 12 - diff-filter=R
ok 13 - diff-filter=C
ok 14 - git log --follow
ok 15 - git log --no-walk <commits> sorts by commit time
ok 16 - git log --no-walk=sorted <commits> sorts by commit time
ok 17 - git log --no-walk=unsorted <commits> leaves list of commits as given
ok 18 - git show <commits> leaves list of commits as given
ok 9 - shortlog encoding
ok 19 - setup case sensitivity tests
ok 19 - am -3 can rename a file after falling back to 3-way merge
ok 20 - log --grep
ok 21 - log --grep option parsing
ok 22 - log -i --grep
ok 23 - log --grep -i
ok 24 - log -F -E --grep=<ere> uses ere
ok 10 - shortlog ignores commits with missing authors
ok 25 - simple log --graph
ok 11 - shortlog with revision pseudo options
# passed all 11 test(s)
1..11
*** t4203-mailmap.sh ***
ok 7 - apply_index: removed submodule leaves submodule containing a .git directory alone
ok 26 - set up merge history
ok 27 - log --graph with merge
ok 28 - log --raw --graph -m with merge
ok 29 - diff-tree --graph
ok 1 - setup
ok 30 - log --graph with full output
ok 2 - check-mailmap no arguments
ok 3 - check-mailmap arguments
ok 4 - check-mailmap --stdin
ok 5 - check-mailmap --stdin arguments
ok 6 - check-mailmap bogus contact
ok 7 - No mailmap
ok 8 - default .mailmap
ok 9 - mailmap.file set
ok 10 - mailmap.file override
ok 11 - mailmap.file non-existent
ok 12 - name entry after email entry
ok 20 - am -3 -q is quiet
ok 13 - name entry after email entry, case-insensitive
ok 14 - No mailmap files, but configured
ok 15 - setup mailmap blob tests
ok 16 - mailmap.blob set
ok 17 - mailmap.blob overrides .mailmap
ok 18 - mailmap.file overrides mailmap.blob
ok 19 - mailmap.blob can be missing
ok 21 - am pauses on conflict
ok 20 - mailmap.blob defaults to off in non-bare repo
ok 31 - set up more tangled history
ok 21 - mailmap.blob defaults to HEAD:.mailmap in bare repo
ok 32 - log --graph with merge
ok 22 - mailmap.blob can handle blobs without trailing newline
ok 23 - cleanup after mailmap.blob tests
ok 24 - single-character name
ok 25 - preserve canonical email case
ok 8 - apply_index: replace submodule with a directory must fail
ok 22 - am --skip works
ok 26 - Shortlog output (complex mapping)
ok 27 - Log output (complex mapping)
ok 28 - Log output with --use-mailmap
ok 23 - am --abort removes a stray directory
ok 29 - Log output with log.mailmap
ok 30 - Grep author with --use-mailmap
ok 31 - Grep author with log.mailmap
ok 32 - Only grep replaced author with --use-mailmap
ok 33 - Blame output (complex mapping)
ok 34 - commit --author honors mailmap
# passed all 34 test(s)
1..34
ok 33 - log.decorate configuration
*** t4204-patch-id.sh ***
ok 34 - reflog is expected format
ok 35 - whatchanged is expected format
ok 1 - setup
ok 2 - patch-id output is well-formed
ok 3 - patch-id detects equality
ok 4 - patch-id detects inequality
ok 36 - log.abbrevCommit configuration
ok 5 - patch-id supports git-format-patch output
ok 24 - am --resolved works
ok 9 - apply_index: replace submodule containing a .git directory with a directory must fail
ok 6 - whitespace is irrelevant in footer
ok 37 - show added path under "--follow -M"
ok 7 - file order is irrelevant with --stable
ok 8 - file order is relevant with --unstable
ok 9 - default is unstable
ok 10 - patchid.stable = true is stable
ok 38 - git log -c --follow
ok 39 - log --graph with diff and stats
ok 25 - am takes patches from a Pine mailbox
ok 40 - dotdot is a parent directory
ok 11 - patchid.stable = false is unstable
ok 12 - --unstable overrides patchid.stable = true
ok 13 - --stable overrides patchid.stable = false
ok 41 - log --graph --show-signature
ok 14 - patch-id supports git-format-patch MIME output
ok 15 - patch-id handles no-nl-at-eof markers
# passed all 15 test(s)
1..15
*** t4205-log-pretty-formats.sh ***
ok 26 - am fails on mail without patch
not ok 10 - apply_index: replace submodule with a file must fail # TODO known breakage
ok 42 - log --graph --show-signature for merged tag
# passed all 42 test(s)
1..42
ok 1 - set up basic repos
ok 2 - alias builtin format
*** t4206-log-follow-harder-copies.sh ***
ok 3 - alias masking builtin format
ok 4 - alias user-defined format
ok 5 - alias user-defined tformat with %s (ISO8859-1 encoding)
ok 1 - add a file path0 and commit.
ok 6 - alias user-defined tformat with %s (utf-8 encoding)
ok 2 - Change path0.
ok 7 - alias user-defined tformat
ok 3 - copy path0 to path1.
ok 4 - find the copy path0 -> path1 harder
ok 8 - alias non-existent format
ok 5 - validate the output.
# passed all 5 test(s)
1..5
ok 9 - alias of an alias
*** t4207-log-decoration-colors.sh ***
ok 27 - am fails on empty patch
ok 10 - alias masking an alias
ok 11 - alias loop
ok 12 - NUL separation
ok 13 - NUL termination
ok 14 - NUL separation with --stat
not ok 15 - NUL termination with --stat # TODO known breakage
ok 16 - setup more commits
ok 28 - am works from stdin in subdirectory
ok 17 - left alignment formatting
ok 18 - left alignment formatting. i18n.logOutputEncoding
ok 19 - left alignment formatting at the nth column
ok 20 - left alignment formatting at the nth column. i18n.logOutputEncoding
ok 21 - left alignment formatting with no padding
ok 22 - left alignment formatting with no padding. i18n.logOutputEncoding
ok 23 - left alignment formatting with trunc
not ok 11 - apply_index: replace submodule containing a .git directory with a file must fail # TODO known breakage
ok 24 - left alignment formatting with trunc. i18n.logOutputEncoding
ok 25 - left alignment formatting with ltrunc
ok 26 - left alignment formatting with ltrunc. i18n.logOutputEncoding
ok 27 - left alignment formatting with mtrunc
ok 28 - left alignment formatting with mtrunc. i18n.logOutputEncoding
ok 29 - right alignment formatting
ok 30 - right alignment formatting. i18n.logOutputEncoding
ok 31 - right alignment formatting at the nth column
ok 29 - am works from file (relative path given) in subdirectory
ok 32 - right alignment formatting at the nth column. i18n.logOutputEncoding
ok 33 - right alignment formatting with no padding
ok 1 - setup
ok 34 - right alignment formatting with no padding. i18n.logOutputEncoding
ok 2 - Commit Decorations Colored Correctly
ok 35 - center alignment formatting
# passed all 2 test(s)
1..2
ok 36 - center alignment formatting. i18n.logOutputEncoding
*** t4208-log-magic-pathspec.sh ***
ok 37 - center alignment formatting at the nth column
ok 38 - center alignment formatting at the nth column. i18n.logOutputEncoding
ok 39 - center alignment formatting with no padding
ok 40 - center alignment formatting with no padding. i18n.logOutputEncoding
ok 41 - left/right alignment formatting with stealing
ok 1 - setup
ok 2 - "git log :/" should not be ambiguous
ok 42 - left/right alignment formatting with stealing. i18n.logOutputEncoding
ok 3 - "git log :/a" should be ambiguous (applied both rev and worktree)
ok 4 - "git log :/a -- " should not be ambiguous
ok 5 - "git log -- :/a" should not be ambiguous
ok 30 - am works from file (absolute path given) in subdirectory
ok 6 - "git log :" should be ambiguous
ok 7 - git log -- :
ok 8 - git log HEAD -- :/
ok 43 - log decoration properly follows tag chain
# still have 1 known breakage(s)
# passed all remaining 42 test(s)
1..43
*** t4209-log-pickaxe.sh ***
ok 9 - command line pathspec parsing for "git log"
# passed all 9 test(s)
1..9
*** t4210-log-i18n.sh ***
ok 1 - setup
ok 2 - log --grep (match)
ok 3 - log --grep (nomatch)
ok 4 - log --grep --regexp-ignore-case (match)
ok 5 - log --grep -i (match)
ok 6 - log --grep --regexp-ignore-case (nomatch)
ok 7 - log --grep -i (nomatch)
ok 31 - am --committer-date-is-author-date
ok 8 - log --author (match)
ok 1 - create commits in different encodings
ok 9 - log --author (nomatch)
ok 2 - log --grep searches in log output encoding (utf8)
ok 10 - log --author --regexp-ignore-case (match)
ok 11 - log --author -i (match)
ok 3 - log --grep searches in log output encoding (latin1)
ok 12 - log --author --regexp-ignore-case (nomatch)
ok 4 - log --grep does not find non-reencoded values (utf8)
ok 13 - log --author -i (nomatch)
ok 5 - log --grep does not find non-reencoded values (latin1)
ok 14 - log -G (nomatch)
# passed all 5 test(s)
1..5
ok 15 - log -G (match)
*** t4211-line-log.sh ***
ok 16 - log -G --regexp-ignore-case (nomatch)
ok 17 - log -G -i (nomatch)
ok 12 - apply_index: modified submodule does not update submodule work tree
ok 18 - log -G --regexp-ignore-case (match)
ok 19 - log -G -i (match)
ok 20 - log -G --textconv (missing textconv tool)
ok 21 - log -G --no-textconv (missing textconv tool)
ok 22 - log -S (nomatch)
ok 23 - log -S (match)
ok 24 - log -S --regexp-ignore-case (match)
ok 25 - log -S -i (match)
ok 26 - log -S --regexp-ignore-case (nomatch)
ok 27 - log -S -i (nomatch)
ok 1 - setup (import history)
ok 28 - log -S --pickaxe-regex (nomatch)
ok 2 - -L 4,12:a.c simple
ok 32 - am without --committer-date-is-author-date
ok 29 - log -S --pickaxe-regex (match)
ok 3 - -L 4,+9:a.c simple
ok 30 - log -S --pickaxe-regex --regexp-ignore-case (match)
ok 4 - -L '/long f/,/^}/:a.c' simple
ok 31 - log -S --pickaxe-regex -i (match)
ok 5 - -L :f:a.c simple
ok 32 - log -S --pickaxe-regex --regexp-ignore-case (nomatch)
ok 6 - -L '/main/,/^}/:a.c' simple
ok 33 - log -S --pickaxe-regex -i (nomatch)
ok 7 - -L :main:a.c simple
ok 34 - log -S --textconv (missing textconv tool)
ok 8 - -L 1,+4:a.c simple
ok 35 - log -S --no-textconv (missing textconv tool)
# passed all 35 test(s)
1..35
ok 9 - -L 20:a.c simple
*** t4212-log-corrupt.sh ***
ok 10 - -L '/long f/',/^}/:a.c -L /main/,/^}/:a.c simple
ok 11 - -L 24,+1:a.c simple
ok 12 - -M -L '/long f/,/^}/:b.c' move-support
ok 13 - -M -L ':f:b.c' parallel-change
ok 14 - -L 4,12:a.c -L :main:a.c simple
ok 15 - -L 4,18:a.c -L ^:main:a.c simple
ok 16 - -L :main:a.c -L 4,18:a.c simple
ok 17 - -L 4:a.c -L 8,12:a.c simple
ok 1 - setup
ok 18 - -L 8,12:a.c -L 4:a.c simple
ok 33 - am --ignore-date
ok 2 - fsck notices broken commit
ok 19 - invalid args: -L
ok 3 - git log with broken author email
ok 20 - invalid args: -L b.c
ok 21 - invalid args: -L 1:
ok 4 - git log --format with broken author email
ok 22 - invalid args: -L 1:nonexistent
ok 23 - invalid args: -L 1:simple
ok 24 - invalid args: -L '/foo:b.c'
ok 5 - unparsable dates produce sentinel value
ok 25 - invalid args: -L 1000:b.c
ok 26 - invalid args: -L 1,1000:b.c
ok 27 - invalid args: -L :b.c
ok 6 - unparsable dates produce sentinel value (%ad)
ok 28 - invalid args: -L :foo:b.c
ok 29 - -L X (X == nlines)
ok 7 - date parser recognizes integer overflow
ok 30 - -L X (X == nlines + 1)
ok 31 - -L X (X == nlines + 2)
ok 8 - date parser recognizes time_t overflow
ok 32 - -L ,Y (Y == nlines)
ok 33 - -L ,Y (Y == nlines + 1)
ok 9 - absurdly far-in-future date
# passed all 9 test(s)
1..9
ok 34 - -L ,Y (Y == nlines + 2)
# passed all 34 test(s)
1..34
*** t4252-am-options.sh ***
ok 34 - am into an unborn branch
*** t4253-am-keep-cr-dos.sh ***
ok 1 - setup
ok 1 - setup repository with dos files
ok 13 - apply_index: modified submodule does not update submodule work tree to invalid commit
ok 35 - am newline in subject
ok 36 - am -q is quiet
ok 2 - am with dos files without --keep-cr
ok 37 - am empty-file does not infloop
# passed all 37 test(s)
1..37
ok 2 - interrupted am --whitespace=fix
*** t4254-am-corrupt.sh ***
ok 1 - setup
ok 14 - apply_index: modified submodule does not update submodule work tree from invalid commit
ok 3 - am with dos files with --keep-cr
ok 2 - try to apply corrupted patch
ok 3 - compare diagnostic; ensure file is still here
# passed all 3 test(s)
1..3
*** t4255-am-submodule.sh ***
ok 3 - interrupted am -C1
ok 4 - am with dos files config am.keepcr
ok 15 - apply_3way: added submodule creates empty directory
ok 4 - interrupted am -p2
ok 5 - am with dos files config am.keepcr overridden by --no-keep-cr
ok 5 - interrupted am -C1 -p2
ok 16 - apply_3way: added submodule leaves existing empty directory alone
ok 17 - apply_3way: added submodule doesn't remove untracked unignored file with same name
ok 6 - am with dos files with --keep-cr continue
ok 6 - interrupted am --directory="frotz nitfol"
ok 7 - am with unix files config am.keepcr overridden by --no-keep-cr
# passed all 7 test(s)
1..7
*** t4300-merge-tree.sh ***
ok 1 - setup
ok 7 - apply to a funny path
ok 2 - file add A, !B
ok 18 - apply_3way: replace tracked file with submodule creates empty directory
ok 3 - file add !A, B
ok 4 - file add A, B (same)
ok 8 - am --reject
ok 1 - am: added submodule creates empty directory
# passed all 8 test(s)
1..8
*** t5000-tar-tree.sh ***
ok 5 - file add A, B (different)
ok 6 - file change A, !B
ok 1 - populate workdir
ok 2 - add ignored file
ok 7 - file change !A, B
ok 3 - add files to repository
ok 4 - setup export-subst
ok 5 - create bare clone
ok 6 - remove ignored file
ok 7 - git archive
ok 8 - extract tar archive
ok 9 # skip interpret pax headers (missing TAR_NEEDS_PAX_FALLBACK)
ok 10 - validate filenames
ok 8 - file change A, B (same)
ok 11 - validate file contents
ok 12 - git archive --prefix=prefix/
ok 13 - extract tar archive
ok 14 # skip interpret pax headers (missing TAR_NEEDS_PAX_FALLBACK)
ok 15 - validate filenames
ok 16 - validate file contents
ok 17 - git-archive --prefix=olde-
ok 18 - extract tar archive
ok 19 # skip interpret pax headers (missing TAR_NEEDS_PAX_FALLBACK)
ok 9 - file change A, B (different)
ok 20 - validate filenames
ok 21 - validate file contents
ok 19 - apply_3way: replace directory with submodule
ok 22 - git archive on large files
ok 23 - git archive in a bare repo
ok 24 - git archive vs. the same in a bare repo
ok 25 - git archive with --output
ok 26 - git archive --remote
ok 27 - validate file modification time
ok 10 - file change A, B (mixed)
ok 28 - git get-tar-commit-id
ok 29 - git archive with --output, override inferred format
ok 30 - git archive --list outside of a git repo
ok 11 - file remove A, !B
ok 31 - clients cannot access unreachable commits
ok 12 - file remove !A, B
ok 32 - upload-archive can allow unreachable commits
ok 33 - setup tar filters
ok 34 - archive --list mentions user filter
ok 13 - file remove A, B (same)
ok 35 - archive --list shows only enabled remote filters
ok 2 - am: added submodule leaves existing empty directory alone
ok 36 - invoke tar filter by format
ok 37 - invoke tar filter by extension
ok 38 - default output format remains tar
ok 14 - file change A, remove B
ok 39 - extension matching requires dot
ok 20 - apply_3way: removed submodule leaves submodule directory and its contents in place
ok 40 - only enabled filters are available remotely
ok 15 - file remove A, change B
ok 41 - git archive --format=tgz
ok 16 - tree add A, B (same)
ok 42 - git archive --format=tar.gz
ok 3 - am: added submodule doesn't remove untracked unignored file with same name
ok 17 - tree add A, B (different)
ok 43 - infer tgz from .tgz filename
ok 18 - tree unchanged A, removed B
ok 44 - infer tgz from .tar.gz filename
ok 45 - extract tgz file
ok 19 - turn file to tree
ok 46 - remote tar.gz is allowed by default
ok 47 - remote tar.gz can be disabled
# passed all 47 test(s)
1..47
*** t5001-archive-attr.sh ***
ok 20 - turn tree to file
# passed all 20 test(s)
1..20
*** t5002-archive-attr-pattern.sh ***
ok 1 - setup
ok 2 - git archive
ok 3 - archive/ignored does not exist
ok 4 - archive/ignored-by-tree does not exist
ok 5 - archive/ignored-by-worktree exists
ok 6 - git archive with worktree attributes
ok 7 - worktree/ignored does not exist
ok 8 - worktree/ignored-by-tree exists
ok 9 - worktree/ignored-by-worktree does not exist
ok 10 - git archive --worktree-attributes option
ok 11 - worktree2/ignored does not exist
ok 12 - worktree2/ignored-by-tree exists
ok 13 - worktree2/ignored-by-worktree does not exist
ok 21 - apply_3way: removed submodule leaves submodule containing a .git directory alone
ok 14 - git archive vs. bare
ok 15 - git archive with worktree attributes, bare
ok 16 - bare-worktree/ignored does not exist
ok 17 - bare-worktree/ignored-by-tree exists
ok 18 - bare-worktree/ignored-by-worktree exists
ok 19 - export-subst
# passed all 19 test(s)
1..19
ok 1 - setup
*** t5003-archive-zip.sh ***
ok 2 - git archive
ok 3 - archive/ignored does not exist
ok 4 - archive/not-ignored-dir/ignored does not exist
ok 5 - archive/not-ignored-dir/ignored-only-if-dir exists
ok 6 - archive/not-ignored-dir/ exists
ok 7 - archive/ignored-only-if-dir/ does not exist
ok 8 - archive/ignored-ony-if-dir/ignored-by-ignored-dir does not exist
ok 9 - archive/ignored-without-slash/ does not exist
ok 10 - archive/ignored-without-slash/foo does not exist
ok 11 - archive/wildcard-without-slash/ does not exist
ok 12 - archive/wildcard-without-slash/foo does not exist
ok 13 - archive/deep/and/slashless/ does not exist
ok 14 - archive/deep/and/slashless/foo does not exist
ok 15 - archive/deep/with/wildcard/ does not exist
ok 16 - archive/deep/with/wildcard/foo does not exist
ok 17 - archive/one-level-lower/ exists
ok 18 - archive/one-level-lower/two-levels-lower/ignored-only-if-dir/ does not exist
ok 19 - archive/one-level-lower/two-levels-lower/ignored-ony-if-dir/ignored-by-ignored-dir does not exist
# passed all 19 test(s)
1..19
*** t5004-archive-corner-cases.sh ***
ok 1 - populate workdir
ok 1 - create commit with empty tree
ok 2 - add symlink
ok 3 - prepare file list
ok 4 - add ignored file
ok 2 - tar archive of commit with empty tree
ok 4 - am: replace tracked file with submodule creates empty directory
ok 3 - tar archive of empty tree is empty
ok 5 - add files to repository
ok 6 - setup export-subst
ok 4 - tar archive of empty tree with prefix
ok 7 - create bare clone
ok 8 - remove ignored file
ok 5 - zip archive of empty tree is empty
ok 9 - git archive --format=zip
ok 10 - extract ZIP archive
ok 6 - zip archive of empty tree with prefix
ok 7 - archive complains about pathspec on empty tree
ok 11 - validate filenames
ok 8 - create a commit with an empty subtree
ok 12 - validate file contents
ok 9 - archive empty subtree with no pathspec
ok 13 - git archive --format=zip in a bare repo
ok 14 - git archive --format=zip vs. the same in a bare repo
ok 22 - apply_3way: replace submodule with a directory must fail
ok 10 - archive empty subtree by direct pathspec
# passed all 10 test(s)
1..10
*** t5100-mailinfo.sh ***
ok 15 - git archive --format=zip with --output
ok 16 - git archive with --output, inferring format
ok 1 - split sample box
ok 2 - mailinfo 0001
ok 3 - mailinfo 0002
ok 4 - mailinfo 0003
ok 17 - git archive --format=zip with prefix
ok 5 - mailinfo 0004
ok 18 - extract ZIP archive
ok 6 - mailinfo 0005
ok 19 - validate filenames
ok 20 - validate file contents
ok 7 - mailinfo 0006
ok 8 - mailinfo 0007
ok 21 - git archive -0 --format=zip on large files
ok 9 - mailinfo 0008
ok 22 - extract ZIP archive
ok 10 - mailinfo 0009
ok 23 - validate filenames
ok 24 - validate file contents
ok 11 - mailinfo 0010
ok 12 - mailinfo 0011
ok 13 - mailinfo 0012
ok 14 - mailinfo 0013
ok 25 - git archive --format=zip on large files
ok 26 - extract ZIP archive
ok 15 - mailinfo 0014
ok 27 - validate filenames
ok 28 - validate file contents
# passed all 28 test(s)
1..28
ok 16 - mailinfo 0015
*** t5150-request-pull.sh ***
ok 5 - am: replace directory with submodule
ok 17 - mailinfo 0016
ok 18 - mailinfo 0017
ok 19 - split box with rfc2047 samples
ok 20 - mailinfo rfc2047/0001
ok 21 - mailinfo rfc2047/0002
ok 22 - mailinfo rfc2047/0003
ok 23 - mailinfo rfc2047/0004
ok 24 - mailinfo rfc2047/0005
ok 23 - apply_3way: replace submodule containing a .git directory with a directory must fail
ok 25 - mailinfo rfc2047/0006
ok 26 - mailinfo rfc2047/0007
ok 27 - mailinfo rfc2047/0008
ok 28 - mailinfo rfc2047/0009
ok 29 - mailinfo rfc2047/0010
ok 30 - mailinfo rfc2047/0011
ok 31 - respect NULs
ok 32 - Preserve NULs out of MIME encoded message
ok 33 - mailinfo on from header without name works
ok 34 - mailinfo finds headers after embedded From line
ok 35 - mailinfo on message with quoted >From
# passed all 35 test(s)
1..35
*** t5300-pack-object.sh ***
ok 1 - setup
ok 2 - setup: two scripts for reading pull requests
ok 3 - pull request when forgot to push
not ok 24 - apply_3way: replace submodule with a file must fail # TODO known breakage
ok 6 - am: removed submodule leaves submodule directory and its contents in place
ok 4 - pull request after push
not ok 25 - apply_3way: replace submodule containing a .git directory with a file must fail # TODO known breakage
ok 5 - request asks HEAD to be pulled
ok 7 - am: removed submodule leaves submodule containing a .git directory alone
ok 1 - setup
ok 6 - pull request format
ok 7 - request-pull ignores OPTIONS_KEEPDASHDASH poison
# passed all 7 test(s)
1..7
*** t5301-sliding-window.sh ***
ok 26 - apply_3way: modified submodule does not update submodule work tree
ok 1 - setup
ok 8 - am: replace submodule with a directory must fail
ok 2 - verify-pack -v, defaults
ok 3 - verify-pack -v, packedGitWindowSize == 1 page
ok 4 - verify-pack -v, packedGit{WindowSize,Limit} == 1 page
ok 5 - repack -a -d, packedGit{WindowSize,Limit} == 1 page
ok 6 - verify-pack -v, defaults
# passed all 6 test(s)
1..6
*** t5302-pack-index.sh ***
ok 2 - pack without delta
ok 3 - pack-objects with bogus arguments
ok 27 - apply_3way: modified submodule does not update submodule work tree to invalid commit
ok 9 - am: replace submodule containing a .git directory with a directory must fail
ok 28 - apply_3way: modified submodule does not update submodule work tree from invalid commit
# still have 4 known breakage(s)
# passed all remaining 24 test(s)
1..28
*** t5303-pack-corruption-resilience.sh ***
ok 4 - unpack without delta
ok 5 - check unpack without delta
ok 1 - initial setup validation
ok 2 - create corruption in header of first object
ok 3 - ... but having a loose copy allows for full recovery
ok 4 - ... and loose copy of first delta allows for partial recovery
not ok 10 - am: replace submodule with a file must fail # TODO known breakage
ok 5 - create corruption in data of first object
ok 6 - ... but having a loose copy allows for full recovery
ok 7 - ... and loose copy of second object allows for partial recovery
ok 8 - create corruption in header of first delta
ok 9 - ... but having a loose copy allows for full recovery
ok 10 - ... and then a repack "clears" the corruption
ok 11 - create corruption in data of first delta
ok 12 - ... but having a loose copy allows for full recovery
not ok 11 - am: replace submodule containing a .git directory with a file must fail # TODO known breakage
ok 13 - ... and then a repack "clears" the corruption
ok 6 - pack with REF_DELTA
ok 14 - corruption in delta base reference of first delta (OBJ_REF_DELTA)
ok 15 - ... but having a loose copy allows for full recovery
ok 16 - ... and then a repack "clears" the corruption
ok 17 - corruption #0 in delta base reference of first delta (OBJ_OFS_DELTA)
ok 18 - ... but having a loose copy allows for full recovery
ok 19 - ... and then a repack "clears" the corruption
ok 20 - corruption #1 in delta base reference of first delta (OBJ_OFS_DELTA)
ok 12 - am: modified submodule does not update submodule work tree
ok 21 - ... but having a loose copy allows for full recovery
ok 22 - ... and then a repack "clears" the corruption
ok 23 - ... and a redundant pack allows for full recovery too
ok 7 - unpack with REF_DELTA
ok 8 - check unpack with REF_DELTA
ok 24 - corruption of delta base reference pointing to wrong object
ok 25 - ... but having a loose copy allows for full recovery
ok 26 - ... and then a repack "clears" the corruption
ok 27 - corrupting header to have too small output buffer fails unpack
# passed all 27 test(s)
1..27
*** t5304-prune.sh ***
ok 1 - setup
ok 2 - prune stale packs
ok 13 - am: modified submodule does not update submodule work tree to invalid commit
ok 3 - prune --expire
ok 4 - gc: implicit prune --expire
ok 5 - gc: refuse to start with invalid gc.pruneExpire
ok 6 - gc: start with ok gc.pruneExpire
ok 7 - prune: prune nonsense parameters
ok 9 - pack with OFS_DELTA
ok 8 - prune: prune unreachable heads
ok 9 - prune: do not prune detached HEAD with no reflog
ok 10 - prune: prune former HEAD after checking out branch
ok 11 - prune: do not prune heads listed as an argument
ok 14 - am: modified submodule does not update submodule work tree from invalid commit
ok 12 - gc --no-prune
ok 13 - gc respects gc.pruneExpire
ok 1 - setup
ok 14 - gc --prune=<date>
ok 15 - am_3way: added submodule creates empty directory
ok 10 - unpack with OFS_DELTA
ok 15 - gc --prune=never
ok 11 - check unpack with OFS_DELTA
ok 12 - compare delta flavors
ok 13 - use packed objects
ok 2 - pack-objects with index version 1
ok 16 - gc respects gc.pruneExpire=never
ok 17 - prune --expire=never
ok 14 - use packed deltified (REF_DELTA) objects
ok 18 - gc: prune old objects after local clone
ok 16 - am_3way: added submodule leaves existing empty directory alone
ok 19 - garbage report in count-objects -v
ok 15 - use packed deltified (OFS_DELTA) objects
ok 20 - prune .git/shallow
# passed all 20 test(s)
1..20
*** t5305-include-tag.sh ***
ok 3 - pack-objects with index version 2
ok 4 - both packs should be identical
ok 5 - index v1 and index v2 should be different
ok 1 - setup
ok 6 - index-pack with index version 1
ok 16 - survive missing objects/pack directory
ok 2 - pack without --include-tag
ok 3 - unpack objects
ok 7 - index-pack with index version 2
ok 8 - index-pack results should match pack-objects ones
ok 4 - check unpacked result (have commit, no tag)
ok 9 - index-pack --verify on index version 1
ok 17 - am_3way: added submodule doesn't remove untracked unignored file with same name
ok 5 - pack with --include-tag
ok 10 - index-pack --verify on index version 2
ok 6 - unpack objects
ok 17 - verify pack
ok 11 - pack-objects --index-version=2, is not accepted
ok 7 - check unpacked result (have commit, have tag)
# passed all 7 test(s)
1..7
*** t5306-pack-nobase.sh ***
ok 1 - setup base
ok 2 - setup patch_clone
ok 18 - verify pack -v
ok 12 - index v2: force some 64-bit offsets with pack-objects
ok 3 - indirectly clone patch_clone
ok 4 - clone of patch_clone is incomplete
ok 13 - index v2: verify a pack with some 64-bit offsets
ok 19 - verify-pack catches mismatched .idx and .pack files
ok 14 - 64-bit offsets: should be different from previous index v2 results
# passed all 4 test(s)
1..4
*** t5307-pack-missing-commit.sh ***
ok 20 - verify-pack catches a corrupted pack signature
ok 15 - index v2: force some 64-bit offsets with index-pack
ok 16 - 64-bit offsets: index-pack result should match pack-objects one
ok 21 - verify-pack catches a corrupted pack version
ok 22 - verify-pack catches a corrupted type/size of the 1st packed object data
ok 18 - am_3way: replace tracked file with submodule creates empty directory
ok 17 - index-pack --verify on 64-bit offset v2 (cheat)
ok 1 - setup
ok 18 - index-pack --verify on 64-bit offset v2
ok 2 - check corruption
ok 3 - rev-list notices corruption (1)
ok 4 - rev-list notices corruption (2)
ok 5 - pack-objects notices corruption
# passed all 5 test(s)
1..5
*** t5308-pack-detect-duplicates.sh ***
ok 23 - verify-pack catches a corrupted sum of the index file itself
ok 1 - pack with no duplicates
ok 19 - [index v1] 1) stream pack to repository
ok 20 - [index v1] 2) create a stealth corruption in a delta base reference
ok 21 - [index v1] 3) corrupted delta happily returned wrong data
ok 2 - index-pack will allow duplicate objects by default
ok 3 - create batch-check test vectors
ok 22 - [index v1] 4) confirm that the pack is actually corrupted
ok 4 - lookup in duplicated pack (binary search)
ok 5 - lookup in duplicated pack (GIT_USE_LOOKUP)
ok 6 - index-pack can reject packs with duplicates
# passed all 6 test(s)
1..6
*** t5309-pack-delta-cycles.sh ***
ok 23 - [index v1] 5) pack-objects happily reuses corrupted data
ok 24 - [index v1] 6) newly created pack is BAD !
ok 1 - index-pack works with a single delta (A->B)
ok 25 - [index v2] 1) stream pack to repository
ok 2 - index-pack works with a single delta (B->A)
ok 26 - [index v2] 2) create a stealth corruption in a delta base reference
ok 27 - [index v2] 3) corrupted delta happily returned wrong data
ok 19 - am_3way: replace directory with submodule
ok 3 - index-pack detects missing base objects
ok 28 - [index v2] 4) confirm that the pack is actually corrupted
ok 4 - index-pack detects REF_DELTA cycles
not ok 5 - failover to an object in another pack # TODO known breakage
not ok 6 - failover to a duplicate object in the same pack # TODO known breakage
# still have 2 known breakage(s)
# passed all remaining 4 test(s)
1..6
*** t5310-pack-bitmaps.sh ***
ok 29 - [index v2] 5) pack-objects refuses to reuse corrupted data
ok 24 - build pack index for an existing pack
ok 20 - am_3way: removed submodule leaves submodule directory and its contents in place
ok 1 - setup repo with moderate-sized history
ok 2 - full repack creates bitmaps
ok 3 - rev-list --test-bitmap verifies bitmaps
ok 4 - counting commits via bitmap (full bitmap)
ok 5 - counting partial commits via bitmap (full bitmap)
ok 6 - counting non-linear history (full bitmap)
ok 7 - enumerate --objects (full bitmap)
ok 8 - bitmap --objects handles non-commit objects (full bitmap)
ok 9 - clone from bitmapped repository
ok 21 - am_3way: removed submodule leaves submodule containing a .git directory alone
ok 25 - unpacking with --strict
ok 10 - setup further non-bitmapped commits
ok 11 - counting commits via bitmap (partial bitmap)
ok 12 - counting partial commits via bitmap (partial bitmap)
ok 13 - counting non-linear history (partial bitmap)
ok 14 - enumerate --objects (partial bitmap)
ok 15 - bitmap --objects handles non-commit objects (partial bitmap)
ok 16 - fetch (partial bitmap)
ok 17 - incremental repack cannot create bitmaps
not ok 22 - am_3way: replace submodule with a directory must fail # TODO known breakage
ok 18 - incremental repack can disable bitmaps
ok 19 - full repack, reusing previous bitmaps
ok 26 - index-pack with --strict
ok 20 - fetch (full bitmap)
ok 21 - create objects for missing-HAVE tests
ok 22 - pack with missing blob
ok 23 - pack with missing tree
ok 30 - [index v2] 6) verify-pack detects CRC mismatch
ok 24 - pack with missing parent
ok 25 # skip we can read jgit bitmaps (missing JGIT)
ok 26 # skip jgit can read our bitmaps (missing JGIT)
ok 31 - running index-pack in the object store
# passed all 31 test(s)
1..31
*** t5311-pack-bitmaps-shallow.sh ***
ok 1 - setup shallow repo
not ok 23 - am_3way: replace submodule containing a .git directory with a directory must fail # TODO known breakage
ok 2 - turn on bitmaps in the parent
ok 3 - shallow fetch from bitmapped repo
# passed all 3 test(s)
1..3
*** t5400-send-pack.sh ***
not ok 24 - am_3way: replace submodule with a file must fail # TODO known breakage
ok 27 - splitting packs does not generate bogus bitmaps
# passed all 27 test(s)
1..27
*** t5401-update-hooks.sh ***
ok 27 - honor pack.packSizeLimit
ok 1 - setup
ok 2 - push
ok 28 - verify resulting packs
ok 3 - updated as expected
ok 4 - hooks ran
ok 5 - pre-receive hook input
ok 6 - update hook arguments
ok 7 - post-receive hook input
ok 8 - post-update hook arguments
ok 9 - all hook stdin is /dev/null
ok 10 - all *-receive hook args are empty
ok 11 - send-pack produced no output
ok 12 - send-pack stderr contains hook messages
# passed all 12 test(s)
1..12
*** t5402-post-merge-hook.sh ***
ok 1 - setup
ok 2 - post-merge does not run for up-to-date
ok 3 - post-merge runs as expected
ok 4 - post-merge from normal merge receives the right argument
ok 5 - post-merge from squash merge runs as expected
ok 6 - post-merge from squash merge receives the right argument
# passed all 6 test(s)
1..6
not ok 25 - am_3way: replace submodule containing a .git directory with a file must fail # TODO known breakage
*** t5403-post-checkout-hook.sh ***
ok 1 - setup
ok 2 - post-checkout runs as expected
ok 3 - post-checkout receives the right arguments with HEAD unchanged
ok 4 - post-checkout runs as expected
ok 5 - post-checkout args are correct with git checkout -b
ok 6 - post-checkout receives the right args with HEAD changed
ok 7 - post-checkout receives the right args when not switching branches
ok 8 - post-checkout hook is triggered by clone
# passed all 8 test(s)
1..8
*** t5404-tracking-branches.sh ***
ok 1 - setup
ok 2 - prepare pushable branches
ok 3 - mixed-success push returns error
ok 4 - check tracking branches updated correctly after push
ok 5 - check tracking branches not updated for failed refs
ok 6 - deleted branches have their tracking branches removed
ok 7 - already deleted tracking branches ignored
# passed all 7 test(s)
1..7
*** t5405-send-pack-rewind.sh ***
ok 26 - am_3way: modified submodule does not update submodule work tree
ok 1 - setup
ok 2 - non forced push should die not segfault
ok 3 - forced push should succeed
# passed all 3 test(s)
1..3
*** t5406-remote-rejects.sh ***
ok 1 - setup
ok 2 - push reports error
ok 3 - individual ref reports error
# passed all 3 test(s)
1..3
*** t5407-post-rewrite-hook.sh ***
ok 1 - setup
ok 2 - git commit --amend
ok 3 - git commit --amend --no-post-rewrite
ok 27 - am_3way: modified submodule does not update submodule work tree to invalid commit
ok 29 - tolerate packsizelimit smaller than biggest object
ok 30 - verify resulting packs
ok 31 - fake a SHA1 hash collision
ok 4 - git rebase
ok 32 - make sure index-pack detects the SHA1 collision
ok 28 - am_3way: modified submodule does not update submodule work tree from invalid commit
# still have 6 known breakage(s)
# passed all remaining 22 test(s)
1..28
ok 33 - make sure index-pack detects the SHA1 collision (large blobs)
# passed all 33 test(s)
1..33
*** t5408-send-pack-stdin.sh ***
*** t5500-fetch-pack.sh ***
ok 1 - setup refs
ok 2 - refs on cmdline
ok 3 - refs over stdin
ok 1 - setup
ok 4 - stdin lines are full refspecs
ok 5 - stdin mixed with cmdline
ok 6 - cmdline refs written in order
ok 2 - 1st pull
ok 5 - git rebase --skip
ok 7 - --stdin refs come after cmdline
ok 8 - refspecs and --mirror do not mix (cmdline)
ok 9 - refspecs and --mirror do not mix (stdin)
# passed all 9 test(s)
1..9
*** t5501-fetch-push-alternates.sh ***
ok 1 - setup
ok 6 - git rebase --skip the last one
ok 2 - pack the source repository
ok 7 - git rebase -m
ok 3 - pack the destination repository
ok 4 - refuse pushing rewound head without --force
ok 5 - push can be used to delete a ref
ok 6 - refuse deleting push with denyDeletes
ok 7 - cannot override denyDeletes with git -c send-pack
ok 8 - override denyDeletes with git -c receive-pack
ok 9 - denyNonFastforwards trumps --force
ok 10 - push --all excludes remote-tracking hierarchy
ok 3 - post 1st pull setup
ok 8 - git rebase -m --skip
ok 11 - receive-pack runs auto-gc in remote repo
ok 12 - pushing explicit refspecs respects forcing
ok 4 - 2nd pull
ok 1 - setup
ok 2 - pushing into a repository with the same alternate
ok 13 - pushing wildcard refspecs respects forcing
ok 3 - fetching from a repository with the same alternate
# passed all 3 test(s)
1..3
ok 9 - git rebase -i (unchanged)
ok 5 - 3rd pull
*** t5502-quickfetch.sh ***
ok 14 - deny pushing to delete current branch
# passed all 14 test(s)
1..14
*** t5503-tagfollow.sh ***
ok 1 - setup
ok 6 - single branch clone
ok 7 - single branch object count
ok 2 - clone without alternate
ok 3 - further commits in the original
ok 4 - copy commit and tree but not blob by hand
ok 1 - setup
ok 2 - setup expect
ok 8 - single given branch clone
ok 5 - quickfetch should not leave a corrupted repository
ok 3 - fetch A (new commit : 1 connection)
ok 6 - quickfetch should not copy from alternate
ok 9 - clone shallow depth 1
ok 4 - create tag T on A, create C on branch cat
ok 5 - setup expect
ok 10 - git rebase -i (skip)
ok 6 - fetch C, T (new branch, tag : 1 connection)
ok 10 - clone shallow depth 1 with fsck
ok 7 - create commits O, B, tag S on B
ok 8 - setup expect
ok 11 - clone shallow
ok 12 - clone shallow depth count
ok 13 - clone shallow object count
ok 14 - clone shallow object count (part 2)
ok 9 - fetch B, S (commit and tag : 1 connection)
ok 15 - fsck in shallow repo
ok 10 - setup expect
ok 16 - simple fetch in shallow repo
ok 17 - no changes expected
ok 18 - fetch same depth in shallow repo
ok 19 - no changes expected
ok 20 - add two more
ok 11 - new clone fetch master and tags
# passed all 11 test(s)
1..11
*** t5504-fetch-receive-strict.sh ***
ok 1 - setup
ok 21 - pull in shallow repo
ok 22 - clone shallow object count
ok 2 - fetch without strict
ok 23 - add two more (part 2)
ok 3 - fetch with !fetch.fsckobjects
ok 4 - fetch with fetch.fsckobjects
ok 11 - git rebase -i (squash)
ok 24 - deepening pull in shallow repo
ok 25 - clone shallow object count
ok 5 - fetch with transfer.fsckobjects
ok 26 - deepening fetch in shallow repo
ok 27 - clone shallow object count
ok 6 - push without strict
ok 7 - push with !receive.fsckobjects
ok 28 - pull in shallow repo with missing merge base
ok 8 - push with receive.fsckobjects
ok 9 - push with transfer.fsckobjects
# passed all 9 test(s)
1..9
*** t5505-remote.sh ***
ok 12 - git rebase -i (fixup without conflict)
ok 29 - additional simple shallow deepenings
ok 30 - clone shallow depth count
ok 31 - clone shallow object count
ok 32 - fetch --no-shallow on full repo
ok 33 - fetch --depth --no-shallow
ok 1 - setup
ok 7 - quickfetch should handle ~1000 refs (on Windows)
# passed all 7 test(s)
1..7
ok 2 - remote information for the origin
ok 34 - turn shallow to complete repository
ok 35 - clone shallow without --no-single-branch
ok 36 - clone shallow object count
ok 3 - add another remote
ok 4 - check remote-tracking
ok 37 - clone shallow with --branch
ok 5 - remote forces tracking branches
ok 38 - clone shallow object count
ok 6 - remove remote
*** t5506-remote-groups.sh ***
ok 7 - remove remote
ok 39 - clone shallow with detached HEAD
ok 1 - setup
ok 8 - remove remote protects local branches
ok 40 - shallow clone pulling tags
ok 2 - no group updates all
ok 13 - git rebase -i (double edit)
# passed all 13 test(s)
1..13
*** t5509-fetch-push-namespaces.sh ***
ok 3 - nonexistent group produces error
ok 41 - shallow cloning single tag
ok 9 - show
ok 10 - show -n
ok 42 - clone shallow with packed refs
ok 11 - prune
ok 12 - set-head --delete
ok 1 - setup
ok 13 - set-head --auto
ok 4 - updating group updates all members (remote update)
ok 14 - set-head --auto has no problem w/multiple HEADs
ok 15 - set-head explicit
ok 16 - prune --dry-run
ok 2 - pushing into a repository using a ref namespace
ok 5 - updating group updates all members (fetch)
ok 17 - add --mirror && prune
ok 3 - pulling from a repository using a ref namespace
ok 4 - mirroring a repository using a ref namespace
# passed all 4 test(s)
1..4
ok 6 - updating group does not update non-members (remote update)
ok 18 - add --mirror=fetch
*** t5510-fetch.sh ***
ok 19 - fetch mirrors act as mirrors during fetch
ok 1 - setup
ok 20 - fetch mirrors can prune
ok 7 - updating group does not update non-members (fetch)
ok 21 - fetch mirrors do not act as mirrors during push
ok 22 - add fetch mirror with specific branches
ok 43 - fetch in shallow repo unreachable shallow objects
ok 23 - fetch mirror respects specific branches
ok 8 - updating remote name updates that remote
ok 2 - clone and setup child repos
# passed all 8 test(s)
1..8
ok 24 - add --mirror=push
*** t5511-refspec.sh ***
ok 3 - fetch test
ok 25 - push mirrors act as mirrors during push
ok 1 - push (invalid)
ok 26 - push mirrors do not act as mirrors during fetch
ok 4 - fetch test for-merge
ok 2 - push :
ok 27 - push mirrors do not allow you to specify refs
ok 3 - push :: (invalid)
ok 4 - push +:
ok 5 - fetch --prune on its own works as expected
ok 44 - fetch creating new shallow root
ok 5 - fetch
ok 6 - fetch :
ok 7 - fetch :: (invalid)
ok 6 - fetch --prune with a branch name keeps branches
ok 28 - add alt && prune
ok 8 - push refs/heads/*:refs/remotes/frotz/*
ok 7 - fetch --prune with a namespace keeps other namespaces
ok 9 - push refs/heads/*:refs/remotes/frotz (invalid)
ok 10 - push refs/heads:refs/remotes/frotz/* (invalid)
ok 45 - setup tests for the --stdin parameter
ok 11 - push refs/heads/master:refs/remotes/frotz/xyzzy
ok 29 - add with reachable tags (default)
ok 12 - fetch refs/heads/*:refs/remotes/frotz/*
ok 13 - fetch refs/heads/*:refs/remotes/frotz (invalid)
ok 46 - fetch refs from cmdline
ok 8 - fetch --prune handles overlapping refspecs
ok 14 - fetch refs/heads:refs/remotes/frotz/* (invalid)
ok 47 - fetch refs from stdin
ok 15 - fetch refs/heads/master:refs/remotes/frotz/xyzzy
ok 30 - add --tags
ok 48 - fetch mixed refs from cmdline and stdin
ok 9 - fetch --prune --tags prunes branches but not tags
ok 16 - fetch refs/heads/master::refs/remotes/frotz/xyzzy (invalid)
ok 17 - fetch refs/heads/maste :refs/remotes/frotz/xyzzy (invalid)
ok 49 - test duplicate refs from stdin
ok 18 - push master~1:refs/remotes/frotz/backup
ok 50 - set up tests of missing reference
ok 51 - test lonely missing ref
ok 10 - fetch --prune --tags with branch does not prune other things
ok 19 - fetch master~1:refs/remotes/frotz/backup (invalid)
ok 31 - add --no-tags
ok 52 - test missing ref after existing
ok 32 - reject --no-no-tags
ok 53 - test missing ref before existing
ok 20 - push HEAD~4:refs/remotes/frotz/new
ok 21 - fetch HEAD~4:refs/remotes/frotz/new (invalid)
ok 54 - test --all, --depth, and explicit head
ok 11 - fetch --prune --tags with refspec prunes based on refspec
ok 22 - push HEAD
ok 55 - test --all, --depth, and explicit tag
ok 33 - update
ok 23 - fetch HEAD
ok 12 - fetch tags when there is no tags
ok 24 - push refs/heads/ nitfol (invalid)
ok 25 - fetch refs/heads/ nitfol (invalid)
ok 26 - push HEAD: (invalid)
ok 27 - fetch HEAD:
ok 13 - fetch following tags
ok 28 - push refs/heads/ nitfol: (invalid)
ok 56 - shallow fetch with tags does not break the repository
ok 29 - fetch refs/heads/ nitfol: (invalid)
ok 34 - update with arguments
ok 57 - fetch-pack --diag-url ssh+git://host/repo
ok 58 - fetch-pack --diag-url ssh+git://host/~repo
ok 59 - fetch-pack --diag-url ssh+git://host:12/repo
ok 30 - push :refs/remotes/frotz/deleteme
ok 60 - fetch-pack --diag-url ssh+git://host:12/~repo
ok 61 - fetch-pack --diag-url ssh+git://[::1]/repo
ok 62 - fetch-pack --diag-url ssh+git://[::1]/~repo
ok 63 - fetch-pack --diag-url ssh+git://[::1]:23/repo
ok 31 - fetch :refs/remotes/frotz/HEAD-to-me
ok 64 - fetch-pack --diag-url ssh+git://[::1]:23/~repo
ok 65 - fetch-pack --diag-url git+ssh://host/repo
ok 32 - push :refs/remotes/frotz/delete me (invalid)
ok 66 - fetch-pack --diag-url git+ssh://host/~repo
ok 67 - fetch-pack --diag-url git+ssh://host:12/repo
ok 35 - update --prune
ok 68 - fetch-pack --diag-url git+ssh://host:12/~repo
ok 33 - fetch :refs/remotes/frotz/HEAD to me (invalid)
ok 69 - fetch-pack --diag-url git+ssh://[::1]/repo
ok 70 - fetch-pack --diag-url git+ssh://[::1]/~repo
ok 34 - fetch refs/heads/*/for-linus:refs/remotes/mine/*-blah (invalid)
ok 71 - fetch-pack --diag-url git+ssh://[::1]:23/repo
ok 72 - fetch-pack --diag-url git+ssh://[::1]:23/~repo
ok 73 - fetch-pack --diag-url git://host/repo
ok 14 - fetch uses remote ref names to describe new refs
ok 35 - push refs/heads/*/for-linus:refs/remotes/mine/*-blah (invalid)
ok 74 - fetch-pack --diag-url git://host/~repo
ok 75 - fetch-pack --diag-url git://host:12/repo
ok 76 - fetch-pack --diag-url git://host:12/~repo
ok 36 - fetch refs/heads*/for-linus:refs/remotes/mine/* (invalid)
ok 77 - fetch-pack --diag-url git://[::1]/repo
ok 78 - fetch-pack --diag-url git://[::1]/~repo
ok 37 - push refs/heads*/for-linus:refs/remotes/mine/* (invalid)
ok 79 - fetch-pack --diag-url git://[::1]:23/repo
ok 15 - fetch must not resolve short tag name
ok 80 - fetch-pack --diag-url git://[::1]:23/~repo
ok 81 - fetch-pack --diag-url ssh://host/repo
ok 38 - fetch refs/heads/*/*/for-linus:refs/remotes/mine/* (invalid)
ok 82 - fetch-pack --diag-url ssh://host/~repo
ok 83 - fetch-pack --diag-url ssh://host:12/repo
ok 39 - push refs/heads/*/*/for-linus:refs/remotes/mine/* (invalid)
ok 84 - fetch-pack --diag-url ssh://host:12/~repo
ok 85 - fetch-pack --diag-url ssh://[::1]/repo
ok 36 - update default
ok 86 - fetch-pack --diag-url ssh://[::1]/~repo
ok 87 - fetch-pack --diag-url ssh://[::1]:23/repo
ok 16 - fetch can now resolve short remote name
ok 88 - fetch-pack --diag-url ssh://[::1]:23/~repo
ok 40 - fetch refs/heads/*/for-linus:refs/remotes/mine/*
ok 89 - fetch-pack --diag-url file://[::1]:23/repo
ok 90 - fetch-pack --diag-url file://[::1]:23/~repo
ok 17 - create bundle 1
ok 91 - fetch-pack --diag-url ./nohost:repo
ok 41 - push refs/heads/*/for-linus:refs/remotes/mine/*
ok 18 - header of bundle looks right
ok 92 - fetch-pack --diag-url ./file:nohost/~repo
ok 93 - fetch-pack --diag-url ./nohost:12:repo
ok 94 - fetch-pack --diag-url ./file:nohost:12/~repo
ok 19 - create bundle 2
ok 42 - fetch refs/heads/Ä
ok 95 - fetch-pack --diag-url ./[::1]:repo
ok 96 - fetch-pack --diag-url ./file:[::1]/~repo
ok 20 - unbundle 1
ok 97 - fetch-pack --diag-url ./[::1]:23:repo
ok 43 - fetch refs/heads/ tab (invalid)
# passed all 43 test(s)
ok 98 - fetch-pack --diag-url ./file:[::1]:23/~repo
1..43
ok 37 - update default (overridden, with funny whitespace)
ok 99 - fetch-pack --diag-url ./[:repo
*** t5512-ls-remote.sh ***
ok 100 - fetch-pack --diag-url ./file:[/~repo
ok 101 - fetch-pack --diag-url ./[:aa:repo
ok 21 - bundle 1 has only 3 files
ok 102 - fetch-pack --diag-url ./file:[:aa/~repo
ok 103 - fetch-pack --diag-url host:repo
ok 104 - fetch-pack --diag-url host:/~repo
ok 105 - fetch-pack --diag-url [::1]:repo
ok 106 - fetch-pack --diag-url [::1]:/~repo
ok 107 - fetch-pack --diag-url ssh+git://host/re:po
ok 38 - update (with remotes.default defined)
ok 1 - setup
ok 108 - fetch-pack --diag-url ssh+git://host/~re:po
ok 22 - unbundle 2
ok 109 - fetch-pack --diag-url ssh+git://host:12/re:po
ok 2 - ls-remote --tags .git
ok 110 - fetch-pack --diag-url ssh+git://host:12/~re:po
ok 3 - ls-remote .git
ok 111 - fetch-pack --diag-url ssh+git://[::1]/re:po
ok 112 - fetch-pack --diag-url ssh+git://[::1]/~re:po
ok 4 - ls-remote --tags self
ok 39 - "remote show" does not show symbolic refs
ok 113 - fetch-pack --diag-url ssh+git://[::1]:23/re:po
ok 40 - reject adding remote with an invalid name
ok 5 - ls-remote self
ok 6 - dies when no remote specified and no default remotes found
ok 114 - fetch-pack --diag-url ssh+git://[::1]:23/~re:po
ok 115 - fetch-pack --diag-url git+ssh://host/re:po
ok 116 - fetch-pack --diag-url git+ssh://host/~re:po
ok 7 - use "origin" when no remote specified
ok 117 - fetch-pack --diag-url git+ssh://host:12/re:po
ok 23 - bundle does not prerequisite objects
ok 8 - suppress "From <url>" with -q
ok 118 - fetch-pack --diag-url git+ssh://host:12/~re:po
ok 119 - fetch-pack --diag-url git+ssh://[::1]/re:po
ok 120 - fetch-pack --diag-url git+ssh://[::1]/~re:po
ok 41 - rename a remote
ok 24 - bundle should be able to create a full history
Skipping rsync tests because rsync was not found
ok 121 - fetch-pack --diag-url git+ssh://[::1]:23/re:po
ok 122 - fetch-pack --diag-url git+ssh://[::1]:23/~re:po
ok 123 - fetch-pack --diag-url git://host/re:po
ok 124 - fetch-pack --diag-url git://host/~re:po
ok 9 - use branch.<name>.remote if possible
ok 125 - fetch-pack --diag-url git://host:12/re:po
ok 126 - fetch-pack --diag-url git://host:12/~re:po
ok 10 - confuses pattern as remote when no remote specified
ok 127 - fetch-pack --diag-url git://[::1]/re:po
ok 42 - rename does not update a non-default fetch refspec
ok 11 - die with non-2 for wrong repository even with --exit-code
ok 25 - fetch with a non-applying branch.<name>.merge
ok 128 - fetch-pack --diag-url git://[::1]/~re:po
ok 12 - Report success even when nothing matches
ok 129 - fetch-pack --diag-url git://[::1]:23/re:po
ok 13 - Report no-match with --exit-code
ok 130 - fetch-pack --diag-url git://[::1]:23/~re:po
ok 131 - fetch-pack --diag-url ssh://host/re:po
ok 14 - Report match with --exit-code
ok 132 - fetch-pack --diag-url ssh://host/~re:po
ok 26 - fetch from GIT URL with a non-applying branch.<name>.merge [1]
ok 43 - rename a remote with name part of fetch spec
ok 133 - fetch-pack --diag-url ssh://host:12/re:po
ok 134 - fetch-pack --diag-url ssh://host:12/~re:po
ok 135 - fetch-pack --diag-url ssh://[::1]/re:po
ok 136 - fetch-pack --diag-url ssh://[::1]/~re:po
ok 15 - Hide some refs with transfer.hiderefs
ok 137 - fetch-pack --diag-url ssh://[::1]:23/re:po
ok 138 - fetch-pack --diag-url ssh://[::1]:23/~re:po
ok 44 - rename a remote with name prefix of other remote
ok 27 - fetch from GIT URL with a non-applying branch.<name>.merge [2]
ok 139 - fetch-pack --diag-url file://[::1]:23/re:po
ok 140 - fetch-pack --diag-url file://[::1]:23/~re:po
ok 16 - Hide some refs with uploadpack.hiderefs
ok 141 - fetch-pack --diag-url ./nohost:re:po
# passed all 16 test(s)
1..16
ok 142 - fetch-pack --diag-url ./file:nohost/~re:po
ok 143 - fetch-pack --diag-url ./nohost:12:re:po
*** t5513-fetch-track.sh ***
ok 144 - fetch-pack --diag-url ./file:nohost:12/~re:po
ok 145 - fetch-pack --diag-url ./[::1]:re:po
ok 28 - fetch from GIT URL with a non-applying branch.<name>.merge [3]
ok 146 - fetch-pack --diag-url ./file:[::1]/~re:po
ok 29 - quoting of a strangely named repo
ok 147 - fetch-pack --diag-url ./[::1]:23:re:po
ok 45 - migrate a remote from named file in $GIT_DIR/remotes
ok 148 - fetch-pack --diag-url ./file:[::1]:23/~re:po
ok 149 - fetch-pack --diag-url ./[:re:po
ok 150 - fetch-pack --diag-url ./file:[/~re:po
ok 151 - fetch-pack --diag-url ./[:aa:re:po
ok 30 - bundle should record HEAD correctly
ok 152 - fetch-pack --diag-url ./file:[:aa/~re:po
ok 31 - mark initial state of origin/master
ok 46 - migrate a remote from named file in $GIT_DIR/branches
ok 153 - fetch-pack --diag-url host:re:po
ok 154 - fetch-pack --diag-url host:/~re:po
ok 1 - setup
ok 155 - fetch-pack --diag-url [::1]:re:po
ok 156 - fetch-pack --diag-url [::1]:/~re:po
ok 157 - fetch-pack --diag-url ssh+git://host/re/po
ok 158 - fetch-pack --diag-url ssh+git://host/~re/po
ok 47 - migrate a remote from named file in $GIT_DIR/branches (2)
ok 159 - fetch-pack --diag-url ssh+git://host:12/re/po
ok 2 - fetch
ok 32 - explicit fetch should update tracking
# passed all 2 test(s)
1..2
ok 160 - fetch-pack --diag-url ssh+git://host:12/~re/po
ok 161 - fetch-pack --diag-url ssh+git://[::1]/re/po
ok 162 - fetch-pack --diag-url ssh+git://[::1]/~re/po
*** t5514-fetch-multiple.sh ***
ok 163 - fetch-pack --diag-url ssh+git://[::1]:23/re/po
ok 164 - fetch-pack --diag-url ssh+git://[::1]:23/~re/po
ok 165 - fetch-pack --diag-url git+ssh://host/re/po
ok 166 - fetch-pack --diag-url git+ssh://host/~re/po
ok 48 - remote prune to cause a dangling symref
ok 167 - fetch-pack --diag-url git+ssh://host:12/re/po
ok 168 - fetch-pack --diag-url git+ssh://host:12/~re/po
ok 169 - fetch-pack --diag-url git+ssh://[::1]/re/po
ok 170 - fetch-pack --diag-url git+ssh://[::1]/~re/po
ok 49 - show empty remote
ok 171 - fetch-pack --diag-url git+ssh://[::1]:23/re/po
ok 50 - remote set-branches requires a remote
ok 172 - fetch-pack --diag-url git+ssh://[::1]:23/~re/po
ok 173 - fetch-pack --diag-url git://host/re/po
ok 174 - fetch-pack --diag-url git://host/~re/po
ok 175 - fetch-pack --diag-url git://host:12/re/po
ok 176 - fetch-pack --diag-url git://host:12/~re/po
ok 33 - explicit pull should update tracking
ok 177 - fetch-pack --diag-url git://[::1]/re/po
ok 34 - explicit --refmap is allowed only with command-line refspec
ok 178 - fetch-pack --diag-url git://[::1]/~re/po
ok 179 - fetch-pack --diag-url git://[::1]:23/re/po
ok 180 - fetch-pack --diag-url git://[::1]:23/~re/po
ok 181 - fetch-pack --diag-url ssh://host/re/po
ok 182 - fetch-pack --diag-url ssh://host/~re/po
ok 183 - fetch-pack --diag-url ssh://host:12/re/po
ok 184 - fetch-pack --diag-url ssh://host:12/~re/po
ok 35 - explicit --refmap option overrides remote.*.fetch
ok 185 - fetch-pack --diag-url ssh://[::1]/re/po
ok 1 - setup
ok 186 - fetch-pack --diag-url ssh://[::1]/~re/po
ok 187 - fetch-pack --diag-url ssh://[::1]:23/re/po
ok 188 - fetch-pack --diag-url ssh://[::1]:23/~re/po
ok 189 - fetch-pack --diag-url file://[::1]:23/re/po
ok 51 - remote set-branches
ok 190 - fetch-pack --diag-url file://[::1]:23/~re/po
ok 191 - fetch-pack --diag-url ./nohost:re/po
ok 36 - explicitly empty --refmap option disables remote.*.fetch
ok 192 - fetch-pack --diag-url ./file:nohost/~re/po
ok 193 - fetch-pack --diag-url ./nohost:12:re/po
ok 194 - fetch-pack --diag-url ./file:nohost:12/~re/po
ok 52 - remote set-branches with --mirror
ok 195 - fetch-pack --diag-url ./[::1]:re/po
ok 53 - new remote
ok 196 - fetch-pack --diag-url ./file:[::1]/~re/po
ok 197 - fetch-pack --diag-url ./[::1]:23:re/po
ok 54 - remote set-url bar
ok 198 - fetch-pack --diag-url ./file:[::1]:23/~re/po
ok 199 - fetch-pack --diag-url ./[:re/po
ok 55 - remote set-url baz bar
ok 200 - fetch-pack --diag-url ./file:[/~re/po
ok 56 - remote set-url zot bar
ok 201 - fetch-pack --diag-url ./[:aa:re/po
ok 37 - configured fetch updates tracking
ok 202 - fetch-pack --diag-url ./file:[:aa/~re/po
ok 57 - remote set-url --push zot baz
ok 203 - fetch-pack --diag-url host:re/po
ok 58 - remote set-url --push zot
ok 204 - fetch-pack --diag-url host:/~re/po
ok 205 - fetch-pack --diag-url [::1]:re/po
ok 2 - git fetch --all
ok 59 - remote set-url --push qux zot
ok 206 - fetch-pack --diag-url [::1]:/~re/po
ok 207 # skip fetch-pack --diag-url file://c:/repo (missing MINGW)
ok 208 # skip fetch-pack --diag-url c:repo (missing MINGW)
# passed all 208 test(s)
1..208
ok 60 - remote set-url --push foo qu+x
ok 38 - non-matching refspecs do not confuse tracking update
ok 61 - remote set-url --push --add aaa
ok 39 - pushing nonexistent branch by mistake should not segv
ok 62 - remote set-url --push bar aaa
ok 63 - remote set-url --push --delete bar
ok 64 - remote set-url --push --delete foo
ok 65 - remote set-url --add bbb
ok 66 - remote set-url --delete .*
ok 67 - remote set-url --delete bbb
ok 68 - remote set-url --delete baz
ok 69 - remote set-url --add ccc
ok 70 - remote set-url --delete baz
ok 71 - extra args: setup
ok 72 - extra args: add nick url
ok 3 - git fetch --all should continue if a remote has errors
ok 73 - extra args: rename origin newname
ok 74 - extra args: remove origin
ok 4 - git fetch --all does not allow non-option arguments
ok 75 - extra args: set-head origin master
ok 76 - extra args: set-url origin newurl oldurl
# passed all 76 test(s)
1..76
*** t5515-fetch-merge-logic.sh ***
ok 40 - auto tag following fetches minimum
ok 41 - refuse to fetch into the current branch
ok 5 - git fetch --multiple (but only one remote)
ok 42 - fetch into the current branch with --update-head-ok
ok 43 - fetch --dry-run
*** t5516-fetch-push.sh ***
ok 6 - git fetch --multiple (two remotes)
ok 7 - git fetch --multiple (bad remote names)
ok 44 - should be able to fetch with duplicate refspecs
ok 1 - setup
ok 8 - git fetch --all (skipFetchAll)
ok 2 - fetch without wildcard
ok 45 - prune fetch.prune=unset remote.origin.prune=unset; kept
ok 3 - fetch with wildcard
ok 1 - setup
ok 9 - git fetch --multiple (ignoring skipFetchAll)
ok 4 - fetch with insteadOf
ok 46 - prune fetch.prune=unset remote.origin.prune=unset --no-prune; kept
ok 10 - git fetch --all --no-tags
ok 2 - br-config-explicit
ok 5 - fetch with pushInsteadOf (should not rewrite)
ok 47 - prune fetch.prune=unset remote.origin.prune=unset --prune; pruned
ok 6 - push without wildcard
ok 11 - git fetch --all --tags
# passed all 11 test(s)
1..11
ok 3 - br-config-explicit config-explicit
ok 7 - push with wildcard
ok 48 - prune fetch.prune=false remote.origin.prune=unset; kept
*** t5517-push-mirror.sh ***
ok 8 - push with insteadOf
ok 4 - br-config-explicit-merge
ok 49 - prune fetch.prune=false remote.origin.prune=unset --no-prune; kept
ok 9 - push with pushInsteadOf
ok 1 - push mirror creates new branches
ok 5 - br-config-explicit-merge config-explicit
ok 50 - prune fetch.prune=false remote.origin.prune=unset --prune; pruned
ok 10 - push with pushInsteadOf and explicit pushurl (pushInsteadOf should not rewrite)
ok 2 - push mirror updates existing branches
ok 6 - br-config-explicit-octopus
ok 51 - prune fetch.prune=true remote.origin.prune=unset; pruned
ok 11 - push with matching heads
ok 7 - br-config-explicit-octopus config-explicit
ok 52 - prune fetch.prune=true remote.origin.prune=unset --prune; pruned
ok 12 - push with matching heads on the command line
ok 3 - push mirror force updates existing branches
ok 8 - br-config-glob
ok 53 - prune fetch.prune=true remote.origin.prune=unset --no-prune; kept
ok 13 - failed (non-fast-forward) push with matching heads
ok 54 - prune fetch.prune=unset remote.origin.prune=false; kept
ok 4 - push mirror removes branches
ok 9 - br-config-glob config-glob
ok 55 - prune fetch.prune=unset remote.origin.prune=false --no-prune; kept
ok 14 - push --force with matching heads
ok 10 - br-config-glob-merge
ok 5 - push mirror adds, updates and removes branches together
ok 56 - prune fetch.prune=unset remote.origin.prune=false --prune; pruned
ok 11 - br-config-glob-merge config-glob
ok 15 - push with matching heads and forced update
ok 57 - prune fetch.prune=false remote.origin.prune=false; kept
ok 6 - push mirror creates new tags
ok 12 - br-config-glob-octopus
ok 58 - prune fetch.prune=false remote.origin.prune=false --no-prune; kept
ok 16 - push with no ambiguity (1)
ok 7 - push mirror updates existing tags
ok 13 - br-config-glob-octopus config-glob
ok 59 - prune fetch.prune=false remote.origin.prune=false --prune; pruned
ok 17 - push with no ambiguity (2)
ok 60 - prune fetch.prune=true remote.origin.prune=false; kept
ok 14 - br-remote-explicit
ok 8 - push mirror force updates existing tags
ok 18 - push with colon-less refspec, no ambiguity
ok 61 - prune fetch.prune=true remote.origin.prune=false --prune; pruned
ok 15 - br-remote-explicit remote-explicit
ok 9 - push mirror removes tags
ok 62 - prune fetch.prune=true remote.origin.prune=false --no-prune; kept
ok 19 - push with weak ambiguity (1)
ok 16 - br-remote-explicit-merge
ok 63 - prune fetch.prune=unset remote.origin.prune=true; pruned
ok 17 - br-remote-explicit-merge remote-explicit
ok 10 - push mirror adds, updates and removes tags together
ok 64 - prune fetch.prune=unset remote.origin.prune=true --no-prune; kept
ok 20 - push with weak ambiguity (2)
ok 18 - br-remote-explicit-octopus
ok 65 - prune fetch.prune=unset remote.origin.prune=true --prune; pruned
ok 11 - remote.foo.mirror adds and removes branches
ok 19 - br-remote-explicit-octopus remote-explicit
ok 21 - push with ambiguity
ok 66 - prune fetch.prune=false remote.origin.prune=true; pruned
ok 12 - remote.foo.mirror=no has no effect
# passed all 12 test(s)
1..12
*** t5518-fetch-exit-status.sh ***
ok 67 - prune fetch.prune=false remote.origin.prune=true --no-prune; kept
ok 20 - br-remote-glob
ok 1 - setup
ok 22 - push with colon-less refspec (1)
ok 2 - non-fast-forward fetch
ok 3 - forced update
# passed all 3 test(s)
1..3
ok 68 - prune fetch.prune=false remote.origin.prune=true --prune; pruned
*** t5519-push-alternates.sh ***
ok 21 - br-remote-glob remote-glob
ok 69 - prune fetch.prune=true remote.origin.prune=true; pruned
ok 23 - push with colon-less refspec (2)
ok 22 - br-remote-glob-merge
ok 1 - setup
ok 70 - prune fetch.prune=true remote.origin.prune=true --prune; pruned
ok 2 - alice works and pushes
ok 24 - push with colon-less refspec (3)
ok 23 - br-remote-glob-merge remote-glob
ok 71 - prune fetch.prune=true remote.origin.prune=true --no-prune; kept
ok 25 - push with colon-less refspec (4)
ok 3 - bob fetches from alice, works and pushes
ok 4 - clean-up in case the previous failed
ok 24 - br-remote-glob-octopus
ok 26 - push head with non-existent, incomplete dest
ok 5 - alice works and pushes again
ok 6 - bob works and pushes
ok 27 - push tag with non-existent, incomplete dest
ok 72 - all boundary commits are excluded
ok 25 - br-remote-glob-octopus remote-glob
ok 28 - push sha1 with non-existent, incomplete dest
ok 7 - alice works and pushes yet again
ok 73 - fetch --prune prints the remotes url
ok 29 - push ref expression with non-existent, incomplete dest
ok 8 - bob works and pushes again
# passed all 8 test(s)
1..8
ok 26 - br-branches-default
*** t5520-pull.sh ***
ok 74 - branchname D/F conflict resolved by --prune
ok 30 - push with HEAD
ok 1 - setup
ok 27 - br-branches-default branches-default
ok 75 - fetching a one-level ref works
# passed all 75 test(s)
1..75
ok 2 - pulling into void
ok 3 - checking the results
ok 28 - br-branches-default-merge
ok 31 - push with HEAD nonexisting at remote
ok 4 - pulling into void using master:master
ok 29 - br-branches-default-merge branches-default
*** t5521-pull-options.sh ***
ok 5 - pulling into void does not overwrite untracked files
ok 30 - br-branches-default-octopus
ok 1 - setup
ok 32 - push with +HEAD
ok 31 - br-branches-default-octopus branches-default
ok 6 - pulling into void does not overwrite staged files
ok 33 - push HEAD with non-existent, incomplete dest
ok 2 - git pull -q
ok 32 - br-branches-one
ok 7 - pulling into void does not remove new staged files
ok 33 - br-branches-one branches-one
ok 34 - push with config remote.*.push = HEAD
ok 8 - test . as a remote
ok 34 - br-branches-one-merge
ok 3 - git pull -q --rebase
ok 9 - the default remote . should not break explicit pull
ok 35 - br-branches-one-merge branches-one
ok 35 - push with remote.pushdefault
ok 4 - git pull
ok 36 - br-branches-one-octopus
ok 5 - git pull --rebase
ok 36 - push with config remote.*.pushurl
ok 37 - br-branches-one-octopus branches-one
ok 6 - git pull -v
ok 38 - master
ok 10 - --rebase
ok 7 - git pull -v --rebase
ok 39 - master config-explicit
ok 8 - git pull -v -q
ok 40 - master config-glob
ok 37 - push with config branch.*.pushremote
ok 9 - git pull -q -v
ok 41 - master remote-explicit
ok 11 - pull.rebase
ok 42 - master remote-glob
ok 38 - branch.*.pushremote config order is irrelevant
ok 10 - git pull --force
ok 39 - push with dry-run
ok 43 - master branches-default
ok 44 - master branches-one
ok 11 - git pull --all
# passed all 11 test(s)
1..11
*** t5522-pull-symlink.sh ***
ok 45 - br-unconfig
ok 12 - branch.to-rebase.rebase
ok 40 - push updates local refs
ok 1 - setup
ok 46 - br-unconfig config-explicit
ok 13 - branch.to-rebase.rebase should override pull.rebase
ok 2 - pulling from real subdir
ok 47 - br-unconfig config-glob
ok 14 - preserve merge setup
ok 3 - pulling from symlinked subdir
ok 48 - br-unconfig remote-explicit
ok 15 - pull.rebase=false create a new merge commit
ok 4 - pushing from symlinked subdir
# passed all 4 test(s)
1..4
*** t5523-push-upstream.sh ***
ok 41 - push updates up-to-date local refs
ok 49 - br-unconfig remote-glob
ok 1 - setup bare parent
ok 2 - setup local commit
ok 42 - push preserves up-to-date packed refs
ok 3 - push -u master:master
ok 4 - push -u master:other
ok 50 - br-unconfig branches-default
ok 5 - push -u --dry-run master:otherX
ok 6 - push -u master2:master2
ok 7 - push -u master2:other2
ok 51 - br-unconfig branches-one
ok 8 - push -u :master2
ok 9 - push -u --all
ok 43 - push does not update local refs on failure
ok 52 - master ../.git
ok 16 - pull.rebase=true flattens keep-merge
ok 10 - push -u HEAD
ok 53 - master ../.git one
ok 44 - allow deleting an invalid remote ref
ok 54 - master ../.git one two
ok 55 - master --tags ../.git
ok 45 - pushing valid refs triggers post-receive and post-update hooks
ok 56 - master ../.git tag tag-one tag tag-three
ok 57 - master ../.git tag tag-one-tree tag tag-three-file
ok 46 - deleting dangling ref triggers hooks with correct args
ok 11 - progress messages go to tty
ok 12 - progress messages do not go to non-tty
ok 58 - master ../.git one tag tag-one tag tag-three-file
ok 17 - pull.rebase=1 is treated as true and flattens keep-merge
ok 13 - progress messages go to non-tty (forced)
ok 47 - deletion of a non-existent ref is not fed to post-receive and post-update hooks
ok 59 - br-unconfig ../.git
ok 60 - br-unconfig ../.git one
ok 48 - deletion of a non-existent ref alone does trigger post-receive and post-update hooks
ok 61 - br-unconfig ../.git one two
ok 14 - push -q suppresses progress
ok 62 - br-unconfig --tags ../.git
ok 63 - br-unconfig ../.git tag tag-one tag tag-three
ok 49 - mixed ref updates, deletes, invalid deletes trigger hooks with correct input
ok 15 - push --no-progress suppresses progress
ok 64 - br-unconfig ../.git tag tag-one-tree tag tag-three-file
ok 50 - allow deleting a ref using --delete
ok 65 - br-unconfig ../.git one tag tag-one tag tag-three-file
# passed all 65 test(s)
1..65
*** t5524-pull-msg.sh ***
ok 16 - quiet push
# passed all 16 test(s)
1..16
*** t5525-fetch-tagopt.sh ***
ok 51 - allow deleting a tag using --delete
ok 1 - setup
ok 52 - push --delete without args aborts
ok 1 - setup
ok 2 - fetch with tagopt=--no-tags does not get tag
ok 2 - pull
# passed all 2 test(s)
1..2
ok 53 - push --delete refuses src:dest refspecs
*** t5526-fetch-submodules.sh ***
ok 3 - fetch --tags with tagopt=--no-tags gets tag
ok 18 - pull.rebase=preserve rebases and merges keep-merge
ok 4 - fetch --no-tags with tagopt=--tags does not get tag
ok 54 - warn on push to HEAD of non-bare repository
ok 5 - fetch with tagopt=--tags gets tag
# passed all 5 test(s)
1..5
ok 19 - pull.rebase=invalid fails
*** t5527-fetch-odd-refs.sh ***
ok 1 - setup repo with odd suffix ref
ok 55 - deny push to HEAD of non-bare repository
ok 20 - --rebase=false create a new merge commit
ok 2 - suffix ref is ignored during fetch
# passed all 2 test(s)
1..2
*** t5528-push-default.sh ***
ok 56 - allow push to HEAD of bare repository (bare)
ok 1 - setup bare remotes
ok 57 - allow push to HEAD of non-bare repository (config)
ok 58 - fetch with branches
ok 2 - "upstream" pushes to configured upstream
ok 3 - "upstream" does not push on unconfigured remote
ok 59 - fetch with branches containing #
ok 4 - "upstream" does not push on unconfigured branch
ok 21 - --rebase=true rebases and flattens keep-merge
ok 1 - setup
ok 60 - push with branches
ok 5 - "upstream" does not push when remotes do not match
ok 61 - push with branches containing #
ok 6 - push from/to new branch with upstream, matching and simple
ok 2 - fetch --recurse-submodules recurses into submodules
ok 7 - push from/to new branch with current creates remote branch
ok 3 - fetch alone only fetches superproject
ok 8 - push to existing branch, with no upstream configured
ok 4 - fetch --no-recurse-submodules only fetches superproject
ok 62 - push into aliased refs (consistent)
ok 5 - using fetchRecurseSubmodules=true in .gitmodules recurses into submodules
ok 9 - push to existing branch, upstream configured with same name
ok 6 - --no-recurse-submodules overrides .gitmodules config
ok 7 - using fetchRecurseSubmodules=false in .git/config overrides setting in .gitmodules
ok 63 - push into aliased refs (inconsistent)
ok 8 - --recurse-submodules overrides fetchRecurseSubmodules setting from .git/config
ok 10 - push to existing branch, upstream configured with different name
ok 9 - --quiet propagates to submodules
ok 11 - push.default = current success in central workflows
ok 64 - push requires --force to update lightweight tag
ok 12 - push.default = upstream success in central workflows
ok 22 - --rebase=preserve rebases and merges keep-merge
ok 10 - --dry-run propagates to submodules
ok 65 - push --porcelain
ok 66 - push --porcelain bad url
ok 13 - push.default = simple failure in central workflows
ok 23 - --rebase=invalid fails
ok 11 - Without --dry-run propagates to submodules
ok 67 - push --porcelain rejected
ok 14 - push.default = matching success in central workflows
ok 68 - push --porcelain --dry-run rejected
ok 12 - recurseSubmodules=true propagates into submodules
ok 15 - push.default = current success in triangular workflows
ok 16 - push.default = upstream failure in triangular workflows
ok 13 - --recurse-submodules overrides config in submodule
ok 24 - --rebase overrides pull.rebase=preserve and flattens keep-merge
ok 69 - push --prune
ok 17 - push.default = simple success in triangular workflows
ok 14 - --no-recurse-submodules overrides config setting
ok 15 - Recursion doesn't happen when no new commits are fetched in the superproject
ok 18 - push.default = matching success in triangular workflows
# passed all 18 test(s)
1..18
*** t5529-push-errors.sh ***
ok 16 - Recursion stops when no new submodule commits are fetched
ok 1 - setup commits
ok 2 - setup remote
ok 3 - setup fake receive-pack
ok 70 - push --prune refspec
ok 4 - detect missing branches early
ok 5 - detect missing sha1 expressions early
ok 6 - detect ambiguous refs early
# passed all 6 test(s)
1..6
ok 17 - Recursion doesn't happen when new superproject commits don't change any submodules
*** t5530-upload-pack-error.sh ***
ok 1 - setup and corrupt repository
ok 2 - fsck fails
ok 3 - upload-pack fails due to error in pack-objects packing
ok 4 - corrupt repo differently
ok 5 - fsck fails
ok 6 - upload-pack fails due to error in rev-list
ok 7 - upload-pack error message when bad ref requested
ok 8 - upload-pack fails due to error in pack-objects enumeration
ok 9 - create empty repository
ok 10 - fetch fails
# passed all 10 test(s)
1..10
*** t5531-deep-submodule-push.sh ***
ok 25 - --rebase with rebased upstream
ok 71 - push to update a ref hidden by transfer.hiderefs
ok 18 - Recursion picks up config in submodule
ok 1 - setup
ok 2 - push
ok 3 - push if submodule has no remote
ok 4 - push fails if submodule commit not on remote
ok 19 - Recursion picks up all submodules when necessary
ok 72 - push to update a ref hidden by receive.hiderefs
ok 5 - push succeeds after commit was pushed to remote
ok 6 - push fails when commit on multiple branches if one branch has no remote
ok 26 - --rebase with rebased default upstream
ok 20 - '--recurse-submodules=on-demand' doesn't recurse when no new commits are fetched in the superproject (and ignores config)
ok 7 - push succeeds if submodule has no remote and is on the first superproject commit
ok 73 - fetch exact SHA1
ok 21 - '--recurse-submodules=on-demand' recurses as deep as necessary (and ignores config)
ok 8 - push unpushed submodules when not needed
ok 9 - push unpushed submodules when not needed 2
ok 22 - '--recurse-submodules=on-demand' stops when no new submodule commits are found in the superproject (and ignores config)
ok 10 - push unpushed submodules recursively
ok 74 - fetch follows tags by default
ok 27 - rebased upstream + fetch + pull --rebase
ok 11 - push unpushable submodule recursively fails
ok 23 - 'fetch.recurseSubmodules=on-demand' overrides global config
# passed all 11 test(s)
1..11
*** t5532-fetch-proxy.sh ***
ok 1 - setup remote repo
ok 2 - setup local repo
ok 75 - pushing a specific ref applies remote.$name.push as refmap
ok 3 - fetch through proxy works
# passed all 3 test(s)
1..3
*** t5533-push-cas.sh ***
ok 24 - 'submodule.<sub>.fetchRecurseSubmodules=on-demand' overrides fetch.recurseSubmodules
ok 1 - setup
ok 25 - don't fetch submodule when newly recorded commits are already present
# passed all 25 test(s)
1..25
ok 76 - with no remote.$name.push, it is not used as refmap
*** t5535-fetch-push-symref.sh ***
ok 2 - push to update (protected)
ok 77 - with no remote.$name.push, upstream mapping is used
ok 1 - setup
ok 3 - push to update (protected, forced)
ok 2 - push
ok 3 - fetch
# passed all 3 test(s)
1..3
*** t5536-fetch-conflicts.sh ***
ok 28 - pull --rebase dies early with dirty working directory
ok 1 - setup
ok 78 - push does not follow tags by default
ok 2 - fetch with no conflict
ok 29 - pull --rebase works on branch yet to be born
ok 4 - push to update (protected, tracking)
ok 3 - fetch conflict: config vs. config
ok 4 - fetch duplicate: config vs. config
ok 30 - setup for detecting upstreamed changes
ok 5 - fetch conflict: arg overrides config
ok 6 - fetch conflict: arg vs. arg
ok 79 - push --follow-tag only pushes relevant tags
ok 7 - fetch conflict: criss-cross args
# passed all 7 test(s)
1..7
ok 5 - push to update (protected, tracking, forced)
*** t5537-fetch-shallow.sh ***
ok 1 - setup
ok 31 - git pull --rebase detects upstreamed changes
ok 80 - push --no-thin must produce non-thin pack
# passed all 80 test(s)
1..80
ok 2 - setup shallow clone
*** t5538-push-shallow.sh ***
ok 32 - setup for avoiding reapplying old patches
ok 6 - push to update (allowed)
ok 3 - clone from shallow clone
ok 4 - fetch from shallow clone
ok 5 - fetch --depth from shallow clone
ok 6 - fetch --unshallow from shallow clone
ok 7 - push to update (allowed, tracking)
ok 7 - fetch something upstream has but hidden by clients shallow boundaries
ok 1 - setup
ok 33 - git pull --rebase does not reapply old patches
ok 2 - push from shallow clone
ok 8 - fetch that requires changes in .git/shallow is filtered
ok 3 - push from shallow clone, with grafted roots
ok 4 - add new shallow root with receive.updateshallow on
ok 8 - push to update (allowed even though no-ff)
ok 9 - fetch --update-shallow
ok 5 - push from shallow to shallow
ok 6 - push from full to shallow
ok 10 - shallow fetch from a read-only repo
# passed all 6 test(s)
1..6
# passed all 10 test(s)
1..10
ok 34 - git pull --rebase against local branch
# passed all 34 test(s)
1..34
*** t5539-fetch-http-shallow.sh ***
*** t5540-http-push-webdav.sh ***
ok 9 - push to delete (protected)
1..0 # SKIP no web server found at '/usr/sbin/apache2'
*** t5541-http-push-smart.sh ***
*** t5542-push-http-shallow.sh ***
1..0 # SKIP no web server found at '/usr/sbin/apache2'
*** t5550-http-fetch-dumb.sh ***
1..0 # SKIP no web server found at '/usr/sbin/apache2'
1..0 # SKIP no web server found at '/usr/sbin/apache2'
*** t5551-http-fetch-smart.sh ***
*** t5560-http-backend-noserver.sh ***
1..0 # SKIP no web server found at '/usr/sbin/apache2'
*** t5561-http-backend.sh ***
1..0 # SKIP no web server found at '/usr/sbin/apache2'
*** t5570-git-daemon.sh ***
1..0 # SKIP no web server found at '/usr/sbin/apache2'
*** t5571-pre-push-hook.sh ***
ok 1 - setup repository
ok 10 - push to delete (protected, forced)
ok 2 - create git-accessible bare repository
ok 1 - setup
ok 1 - setup repository
ok 2 - push with failing hook
ok 2 - direct refs/heads/master not found
ok 3 - clone git repository
ok 3 - --no-verify bypasses hook
ok 4 - push with hook
ok 3 - static file is ok
ok 11 - push to delete (allowed)
ok 5 - add a branch
ok 6 - push to default
ok 4 - fetch changes via git protocol
ok 7 - push non-branches
ok 4 - no export by default
ok 8 - push delete
ok 5 - remote detects correct HEAD
ok 9 - push to URL
# passed all 9 test(s)
1..9
*** t5572-pull-submodule.sh ***
ok 5 - export if git-daemon-export-ok
ok 6 - prepare pack objects
ok 12 - cover everything with default force-with-lease (protected)
ok 7 - fetch notices corrupt pack
ok 6 - static file if http.getanyfile true is ok
ok 8 - fetch notices corrupt idx
ok 9 - clone non-existent
ok 10 - push disabled
ok 11 - read access denied
ok 12 - not exported
ok 7 - static file if http.getanyfile false fails
ok 13 - clone non-existent
ok 14 - push disabled
ok 8 - http.uploadpack default enabled
ok 15 - read access denied
ok 16 - not exported
# passed all 16 test(s)
1..16
ok 13 - cover everything with default force-with-lease (allowed)
ok 9 - http.uploadpack true
# passed all 13 test(s)
1..13
ok 10 - http.uploadpack false
*** t5600-clone-fail-cleanup.sh ***
*** t5601-clone.sh ***
ok 11 - http.receivepack default disabled
ok 1 - clone of non-existent source should fail
ok 2 - failed clone should not leave a directory
ok 12 - http.receivepack true
ok 3 - clone of non-existent (relative to $PWD) source should fail
ok 1 - setup
ok 13 - http.receivepack false
ok 2 - clone with excess parameters (1)
ok 4 - clone should work now that source exists
ok 5 - successful clone must leave the directory
ok 3 - clone with excess parameters (2)
ok 6 - failed clone --separate-git-dir should not leave any directories
# passed all 6 test(s)
1..6
*** t5602-clone-remote-exec.sh ***
ok 14 - http-backend blocks bad PATH_INFO
# passed all 14 test(s)
1..14
*** t5700-clone-reference.sh ***
ok 4 - output from clone
ok 1 - setup
ok 2 - clone calls git upload-pack unqualified with no -u option
ok 3 - clone calls specified git upload-pack with -u option
# passed all 3 test(s)
1..3
*** t5701-clone-local.sh ***
ok 1 - preparing first repository
ok 5 - clone does not keep pack
ok 6 - clone checks out files
ok 7 - clone respects GIT_WORK_TREE
ok 8 - clone creates intermediate directories
ok 2 - preparing second repository
ok 9 - clone creates intermediate directories for bare repo
ok 1 - preparing origin repository
ok 3 - cloning with reference (-l -s)
ok 4 - existence of info/alternates
ok 10 - clone --mirror
ok 2 - local clone without .git suffix
ok 11 - clone --mirror with detached HEAD
ok 3 - local clone with .git suffix
ok 5 - pulling from reference
ok 6 - that reference gets used
ok 12 - clone --bare with detached HEAD
ok 4 - local clone from x
ok 5 - local clone from x.git that does not exist
ok 7 - cloning with reference (no -l -s)
ok 8 - fetched no objects
ok 9 - existence of info/alternates
ok 13 - clone --bare names the local repository <name>.git
ok 6 - With -no-hardlinks, local will make a copy
ok 14 - clone --mirror does not repeat tags
ok 7 - Even without -l, local will make a hardlink
ok 15 - clone to destination with trailing /
ok 8 - local clone of repo with nonexistent ref in HEAD
ok 10 - pulling from reference
ok 16 - clone to destination with extra trailing /
ok 11 - that reference gets used
ok 17 - clone to an existing empty directory
ok 18 - clone to an existing non-empty directory
ok 19 - clone to an existing path
ok 9 - bundle clone without .bundle suffix
ok 12 - updating origin
ok 10 - bundle clone with .bundle suffix
ok 20 - clone a void
ok 13 - pulling changes from origin
ok 14 - that alternate to origin gets used
ok 21 - clone respects global branch.autosetuprebase
ok 1 - git_pull: added submodule creates empty directory
ok 11 - bundle clone from b4
ok 12 - bundle clone from b4.bundle that does not exist
ok 22 - respect url-encoding of file://
ok 15 - pulling changes from origin
ok 23 - do not query-string-decode + in URLs
ok 16 - check objects expected to exist locally
ok 13 - bundle clone with nonexistent HEAD
ok 17 - preparing alternate repository #1
ok 24 - do not respect url-encoding of non-url path
ok 25 - clone separate gitdir
ok 26 - clone separate gitdir: output
ok 18 - cloning alternate repo #2 and adding changes to repo #1
ok 27 - clone from .git file
ok 19 - cloning alternate repo #1, using #2 as reference
ok 28 - fetch from .git gitfile
ok 14 - clone empty repository
ok 20 - cloning with reference being subset of source (-l -s)
ok 29 - fetch from gitfile parent
ok 30 - clone separate gitdir where target already exists
ok 21 - clone with reference from a tagged repository
ok 15 - clone empty repository, and then push should not segfault.
ok 16 - cloning non-existent directory fails
ok 17 - cloning non-git directory fails
ok 31 - clone --reference from original
ok 22 - prepare branched repository
ok 18 - cloning file:// does not hardlink
ok 32 - clone with more than one --reference
ok 23 - fetch with incomplete alternates
ok 19 - cloning a local path with --no-local does not hardlink
ok 33 - clone from original with relative alternate
ok 20 - cloning locally respects "-u" for fetching refs
# passed all 20 test(s)
1..20
ok 24 - clone using repo with gitfile as a reference
ok 34 - clone checking out a tag
ok 2 - git_pull: added submodule leaves existing empty directory alone
ok 25 - clone using repo pointed at by gitfile as reference
ok 35 - setup ssh wrapper
# passed all 25 test(s)
1..25
*** t5702-clone-options.sh ***
*** t5704-bundle.sh ***
ok 1 - setup
ok 36 - clone myhost:src uses ssh
ok 2 - clone -o
ok 37 - clone local path foo:bar
ok 3 - redirected clone does not show progress
ok 1 - setup
ok 3 - git_pull: added submodule doesn't remove untracked unignored file with same name
ok 38 - bracketed hostnames are still ssh
ok 39 - clone c:temp is ssl
ok 40 # skip clone c:temp is dos drive (missing MINGW)
ok 2 - annotated tags can be excluded by rev-list options
ok 41 - clone host:rep
ok 4 - redirected clone -v does show progress
# passed all 4 test(s)
1..4
ok 42 - clone host:rep/home/project
ok 3 - die if bundle file cannot be created
not ok 4 - bundle --stdin # TODO known breakage
*** t5705-clone-2gb.sh ***
ok 43 - clone host:123
ok 44 - clone [::1]:rep
not ok 5 - bundle --stdin <rev-list options> # TODO known breakage
Skipping expensive 2GB clone test; enable it with GIT_TEST_CLONE_2GB=t
ok 1 # skip setup (missing CLONE_2GB)
ok 2 # skip clone - bare (missing CLONE_2GB)
ok 3 # skip clone - with worktree, file:// protocol (missing CLONE_2GB)
# passed all 3 test(s)
1..3
ok 6 - empty bundle file is rejected
*** t5706-clone-branch.sh ***
ok 45 - clone [::1]:rep/home/project
ok 46 - clone [::1]:123
ok 47 - clone host:/~repo
ok 48 - clone [::1]:/~repo
ok 7 - ridiculously long subject in boundary
ok 49 - clone foo/bar:baz is not ssh
ok 1 - setup
ok 50 - clone [foo]bar/baz:qux is not ssh
ok 51 - clone [foo/bar]:baz is not ssh
ok 2 - vanilla clone chooses HEAD
ok 8 - prerequisites with an empty commit message
# still have 2 known breakage(s)
# passed all remaining 6 test(s)
1..8
ok 52 - clone ssh://host.xz/home/user/repo
*** t5707-clone-detached.sh ***
ok 3 - clone -b chooses specified branch
ok 53 - clone ssh://host.xz/~repo
ok 4 - clone -b sets up tracking
ok 5 - clone -b does not munge remotes/origin/HEAD
ok 54 - clone ssh://host.xz:22/home/user/repo
ok 6 - clone -b with bogus branch
ok 55 - clone ssh://host.xz:22/~repo
ok 7 - clone -b not allowed with empty repos
# passed all 7 test(s)
1..7
ok 1 - setup
ok 56 - clone ssh://[::1]/home/user/repo
ok 57 - clone ssh://[::1]/~repo
*** t5708-clone-config.sh ***
ok 58 - clone ssh://[::1]:22/home/user/repo
ok 59 - clone ssh://[::1]:22/~repo
ok 2 - clone repo (detached HEAD points to branch)
ok 4 - git_pull: replace tracked file with submodule creates empty directory
ok 3 - cloned HEAD matches
ok 1 - clone -c sets config in cloned repo
not ok 4 - cloned HEAD is detached # TODO known breakage
ok 60 - clone from a repository with two identical branches
ok 2 - clone -c can set multi-keys
ok 3 - clone -c without a value is boolean true
ok 4 - clone -c config is available during clone
# passed all 4 test(s)
1..4
ok 5 - clone repo (detached HEAD points to tag)
*** t5709-clone-refspec.sh ***
ok 6 - cloned HEAD matches
ok 7 - cloned HEAD is detached
ok 61 - shallow clone locally
# passed all 61 test(s)
1..61
ok 8 - clone repo (detached HEAD points to history)
ok 9 - cloned HEAD matches
ok 10 - cloned HEAD is detached
ok 11 - clone repo (orphan detached HEAD)
ok 12 - cloned HEAD matches
ok 13 - cloned HEAD is detached
# still have 1 known breakage(s)
# passed all remaining 12 test(s)
1..13
*** t5710-info-alternate.sh ***
*** t5801-remote-helpers.sh ***
ok 1 - setup repository
ok 1 - setup
ok 5 - git_pull: replace directory with submodule
ok 2 - by default all branches will be kept updated
ok 1 - preparing first repository
ok 2 - cloning from local repo
ok 3 - by default no tags will be kept updated
ok 3 - create new commit on remote
ok 4 - --single-branch while HEAD pointing at master
ok 2 - preparing second repository
ok 5 - --single-branch while HEAD pointing at side
ok 4 - pulling from local repo
ok 6 - --single-branch with explicit --branch side
ok 3 - preparing third repository
ok 7 - --single-branch with explicit --branch with tag fetches updated tag
ok 5 - pushing to local repo
ok 8 - --single-branch with --mirror
ok 4 - creating too deep nesting
ok 9 - --single-branch with explicit --branch and --mirror
ok 5 - invalidity of deepest repository
ok 6 - validity of third repository
ok 6 - fetch new branch
ok 7 - validity of fourth repository
ok 10 - --single-branch with detached
# passed all 10 test(s)
1..10
ok 8 - breaking of loops
ok 6 - git_pull: removed submodule leaves submodule directory and its contents in place
ok 9 - that info/alternates is necessary
ok 10 - that relative alternate is possible for current dir
ok 11 - that relative alternate is only possible for current dir
# passed all 11 test(s)
1..11
ok 7 - fetch multiple branches
*** t5802-connect-helper.sh ***
*** t5900-repo-selection.sh ***
ok 1 - setup
ok 8 - push when remote has extra refs
ok 1 - find .git dir in worktree
ok 2 - clone
ok 9 - push new branch by name
ok 10 - push new branch with old:new refspec
ok 2 - automagically add .git suffix
ok 3 - update following tag
ok 11 - push new branch with HEAD:new refspec
ok 12 - push delete branch
ok 3 - automagically add .git suffix to worktree
ok 4 - update backfilled tag
ok 7 - git_pull: removed submodule leaves submodule containing a .git directory alone
ok 13 - forced push
ok 4 - prefer worktree foo over bare foo.git
ok 5 - update backfilled tag without primary transfer
# passed all 5 test(s)
1..5
*** t6000-rev-list-misc.sh ***
ok 14 - cloning without refspec
ok 1 - setup
ok 2 - rev-list --objects heeds pathspecs
ok 3 - rev-list --objects with pathspecs and deeper paths
ok 5 - prefer bare foo over bare foo.git
ok 4 - rev-list --objects with pathspecs and copied files
ok 5 - rev-list A..B and rev-list ^A B are the same
ok 15 - pulling without refspecs
ok 6 - propagate uninteresting flag down correctly
ok 7 - symleft flag bit is propagated down from tag
# passed all 7 test(s)
1..7
*** t6001-rev-list-graft.sh ***
ok 16 - pushing without refspecs
ok 6 - disambiguate with full foo.git
ok 17 - pulling without marks
ok 7 - we are not fooled by non-git foo directory
ok 8 - git_pull: replace submodule with a directory must fail
ok 1 - setup
ok 2 - without grafts
ok 3 - with grafts
ok 4 - without grafts, with pathlimit
ok 5 - with grafts, with pathlimit
ok 6 - without grafts
ok 7 - with grafts
ok 8 - without grafts, with pathlimit
ok 9 - with grafts, with pathlimit
not ok 18 - pushing without marks # TODO known breakage
ok 10 - without grafts
ok 11 - with grafts
ok 12 - without grafts, with pathlimit
ok 13 - with grafts, with pathlimit
# passed all 13 test(s)
1..13
ok 8 - prefer inner .git over outer bare
ok 19 - push all with existing object
# passed all 8 test(s)
1..8
*** t6002-rev-list-bisect.sh ***
*** t6003-rev-list-topo-order.sh ***
ok 20 - push ref with existing object
ok 21 - push signed tag
ok 22 - push signed tag with signed-tags capability
ok 9 - git_pull: replace submodule containing a .git directory with a directory must fail
ok 23 - push update refs
ok 24 - push update refs disabled by no-private-update
ok 25 - push update refs failure
ok 26 - proper failure checks for fetching
ok 27 - proper failure checks for pushing
ok 1 - bisection diff --bisect l0 ^root <= 0
ok 2 - bisection diff --bisect l1 ^root <= 0
ok 3 - bisection diff --bisect l2 ^root <= 0
ok 4 - bisection diff --bisect a0 ^root <= 0
ok 5 - bisection diff --bisect a1 ^root <= 0
ok 6 - bisection diff --bisect a2 ^root <= 0
ok 7 - bisection diff --bisect a3 ^root <= 0
ok 8 - bisection diff --bisect b1 ^root <= 0
not ok 10 - git_pull: replace submodule with a file must fail # TODO known breakage
ok 9 - bisection diff --bisect b2 ^root <= 0
ok 10 - bisection diff --bisect b3 ^root <= 0
ok 11 - bisection diff --bisect c1 ^root <= 0
ok 1 - rev-list has correct number of entries
ok 28 - push messages
ok 12 - bisection diff --bisect c2 ^root <= 0
# still have 1 known breakage(s)
# passed all remaining 27 test(s)
1..28
ok 2 - simple topo order
ok 13 - bisection diff --bisect c3 ^root <= 0
ok 3 - simple date order
ok 14 - bisection diff --bisect E ^F <= 0
*** t6004-rev-list-path-optim.sh ***
ok 4 - simple author-date order
ok 15 - bisection diff --bisect e1 ^F <= 0
ok 16 - bisection diff --bisect e2 ^F <= 0
ok 5 - two diamonds topo order (g6)
ok 17 - bisection diff --bisect e3 ^F <= 0
ok 6 - multiple heads
ok 18 - bisection diff --bisect e4 ^F <= 0
ok 1 - setup
ok 7 - multiple heads, prune at a1
ok 19 - bisection diff --bisect e5 ^F <= 0
ok 2 - path-optimization
ok 8 - multiple heads, prune at l1
ok 20 - bisection diff --bisect e6 ^F <= 0
ok 9 - cross-epoch, head at l5, prune at l1
ok 21 - bisection diff --bisect e7 ^F <= 0
ok 10 - duplicated head arguments
ok 22 - bisection diff --bisect f1 ^F <= 0
ok 11 - prune near topo
ok 23 - bisection diff --bisect f2 ^F <= 0
ok 12 - head has no parent
ok 24 - bisection diff --bisect f3 ^F <= 0
ok 13 - two nodes - one head, one base
ok 25 - bisection diff --bisect f4 ^F <= 0
ok 14 - three nodes one head, one internal, one base
ok 26 - bisection diff --bisect E ^F <= 0
ok 3 - further setup
ok 15 - linear prune l2 ^root
ok 4 - path optimization 2
ok 27 - bisection diff --bisect V ^U <= 1
ok 5 - pathspec with leading path
ok 16 - linear prune l2 ^l0
ok 28 - bisection diff --bisect V ^U ^u1 ^u2 ^u3 <= 0
ok 6 - pathspec with glob (1)
ok 17 - linear prune l2 ^l1
ok 29 - bisection diff --bisect u1 ^U <= 0
ok 7 - pathspec with glob (2)
# passed all 7 test(s)
1..7
ok 18 - linear prune l5 ^a4
*** t6005-rev-list-count.sh ***
ok 30 - bisection diff --bisect u2 ^U <= 0
ok 19 - linear prune l5 ^l3
ok 31 - bisection diff --bisect u3 ^U <= 0
ok 20 - linear prune l5 ^l4
ok 32 - bisection diff --bisect u4 ^U <= 0
ok 21 - max-count 10 - topo order
ok 33 - bisection diff --bisect u5 ^U <= 0
ok 22 - max-count 10 - non topo order
not ok 11 - git_pull: replace submodule containing a .git directory with a file must fail # TODO known breakage
ok 34 - --bisect l5 ^root
ok 23 - --max-age=c3, no --topo-order
ok 35 - --bisect l5 ^root ^c3
ok 1 - setup
ok 24 - one specified head reachable from another a4, c3, --topo-order
ok 2 - no options
ok 36 - --bisect l5 ^root ^c3 ^b4
ok 25 - one specified head reachable from another c3, a4, --topo-order
ok 37 - --bisect l3 ^root ^c3 ^b4
ok 3 - --max-count
ok 26 - one specified head reachable from another a4, c3, no --topo-order
ok 38 - --bisect l5 ^b3 ^a3 ^b4 ^a4
ok 4 - --max-count all forms
ok 39 - --bisect l4 ^a2 ^a3 ^b ^a4
ok 27 - one specified head reachable from another c3, a4, no --topo-order
ok 28 - graph with c3 and a4 parents of head
ok 40 - --bisect l3 ^a2 ^a3 ^b ^a4
ok 5 - --skip
ok 29 - graph with a4 and c3 parents of head
ok 41 - --bisect a4 ^a2 ^a3 ^b4
ok 30 - head ^head --topo-order
ok 31 - head ^head no --topo-order
ok 42 - --bisect a4 ^a2 ^a3 ^b4 ^c2
ok 6 - --skip --max-count
ok 32 - simple topo order (l5r1)
# passed all 6 test(s)
1..6
ok 43 - --bisect a4 ^a2 ^a3 ^b4 ^c2 ^c3
*** t6006-rev-list-format.sh ***
ok 44 - --bisect a4 ^a2 ^a3 ^b4
ok 33 - simple topo order (r1l5)
ok 45 - --bisect c3 ^a2 ^a3 ^b4 ^c2
# passed all 45 test(s)
1..45
ok 34 - don't print things unreachable from one branch
ok 35 - --topo-order a4 l3
# passed all 35 test(s)
1..35
*** t6007-rev-list-cherry-pick-file.sh ***
*** t6008-rev-list-submodule.sh ***
ok 1 - setup
ok 2 - format percent
ok 3 - format hash
ok 4 - format tree
ok 5 - format parents
ok 6 - format author
ok 7 - format committer
ok 8 - format encoding
ok 9 - format subject
ok 10 - format subject-truncated
ok 11 - format body
ok 12 - format raw-body
ok 13 - format colors
ok 14 - format advanced-colors
ok 1 - setup
ok 15 - %C(auto) does not enable color by default
ok 16 - %C(auto) enables colors for color.diff
ok 17 - %C(auto) enables colors for color.ui
ok 2 - --left-right
ok 18 - %C(auto) respects --color
ok 3 - --count
ok 19 - %C(auto) respects --no-color
ok 4 - --cherry-pick foo comes up empty
ok 5 - --cherry-pick bar does not come up empty
ok 1 - setup
ok 6 - bar does not come up empty
ok 2 - Ilari's test
# passed all 2 test(s)
1..2
ok 7 - --cherry-pick bar does not come up empty (II)
*** t6009-rev-list-parent.sh ***
ok 8 - --cherry-mark
ok 9 - --cherry-mark --left-right
ok 10 - --cherry-pick --right-only
ok 11 - --cherry-pick --left-only
ok 12 - git_pull: modified submodule does not update submodule work tree
ok 12 - --cherry
ok 13 - --cherry --count
ok 14 - --cherry-mark --count
ok 15 - --cherry-mark --left-right --count
ok 1 - setup
ok 2 - one is ancestor of others and should not be shown
ok 16 - --cherry-pick with independent, but identical branches
ok 17 - --count --left-right
# passed all 17 test(s)
1..17
*** t6010-merge-base.sh ***
ok 1 - setup
ok 20 - %C(auto) respects --color=auto (stdout is tty)
ok 21 - %C(auto) respects --color=auto (stdout not tty)
ok 22 - setup complex body
ok 2 - set up G and H
ok 23 - format complex-encoding
ok 24 - format complex-subject
ok 25 - format complex-subject-trunc
ok 26 - format complex-subject-mtrunc
ok 27 - format complex-subject-ltrunc
ok 28 - prepare expected messages (for test %b)
ok 3 - merge-base G H
ok 29 - format complex-body
ok 30 - format complex-subject-commitencoding-unset
ok 31 - format complex-subject-commitencoding-unset-trunc
ok 32 - format complex-subject-commitencoding-unset-mtrunc
ok 33 - format complex-subject-commitencoding-unset-ltrunc
ok 34 - format complex-body-commitencoding-unset
ok 35 - %x00 shows NUL
ok 4 - merge-base/show-branch --independent
ok 36 - %ad respects --date=
ok 37 - empty email
ok 38 - del LF before empty (1)
ok 39 - del LF before empty (2)
ok 40 - add LF before non-empty (1)
ok 3 - setup roots, merges and octopuses
ok 41 - add LF before non-empty (2)
ok 42 - add SP before non-empty (1)
ok 4 - rev-list roots
ok 43 - add SP before non-empty (2)
ok 5 - rev-list no merges
ok 44 - --abbrev
ok 45 - %H is not affected by --abbrev-commit
ok 6 - rev-list no octopuses
ok 46 - %h is not affected by --abbrev-commit
ok 5 - unsynchronized clocks
ok 7 - rev-list no roots
ok 47 - "%h %gD: %gs" is same as git-reflog
ok 48 - "%h %gD: %gs" is same as git-reflog (with date)
ok 49 - "%h %gD: %gs" is same as git-reflog (with --abbrev)
ok 8 - rev-list merges
ok 50 - %gd shortens ref name
ok 9 - rev-list octopus
ok 51 - reflog identity
ok 10 - rev-list ordinary commits
ok 6 - --independent with unsynchronized clocks
ok 11 - rev-list --merges --no-merges yields empty set
ok 13 - git_pull: modified submodule does not update submodule work tree to invalid commit
ok 12 - rev-list override and infinities
ok 52 - oneline with empty message
ok 53 - single-character name is parsed correctly
ok 54 - unused %G placeholders are passed through
# passed all 54 test(s)
1..54
*** t6011-rev-list-with-bad-commit.sh ***
ok 7 - merge-base for octopus-step (setup)
ok 8 - merge-base A B C
ok 1 - setup
ok 2 - verify number of revisions
ok 3 - corrupt second commit object
ok 4 - rev-list should fail
ok 5 - git repack _MUST_ fail
ok 6 - first commit is still available
# passed all 6 test(s)
1..6
*** t6012-rev-list-simplify.sh ***
ok 9 - criss-cross merge-base for octopus-step
ok 14 - git_pull: modified submodule does not update submodule work tree from invalid commit
ok 13 - dodecapus
ok 10 - using reflog to find the fork point
ok 1 - setup
ok 2 - log --full-history
ok 3 - log --full-history -- file
ok 4 - log --full-history --topo-order -- file
ok 5 - log --full-history --date-order -- file
ok 6 - log --simplify-merges -- file
ok 7 - log -- file
ok 8 - log --topo-order -- file
ok 14 - ancestors with the same commit time
ok 9 - log --first-parent -- another-file
# passed all 14 test(s)
1..14
ok 10 - log --full-history E -- lost
ok 11 - full history simplification without parent
*** t6013-rev-list-reverse-parents.sh ***
ok 12 - --full-diff is not affected by --parents
# passed all 12 test(s)
1..12
*** t6014-rev-list-all.sh ***
ok 11 - merge-base --octopus --all for complex tree
# passed all 11 test(s)
1..11
*** t6015-rev-list-show-all-parents.sh ***
ok 15 - git_pull_ff: added submodule creates empty directory
ok 1 - setup
ok 2 - rev-list --all lists detached HEAD
ok 1 - set up --reverse example
ok 2 - --reverse --parents --full-history combines correctly
ok 3 - --boundary does too
# passed all 3 test(s)
1..3
*** t6016-rev-list-graph-simplify-history.sh ***
ok 1 - set up --show-all --parents test
ok 2 - --parents rewrites TREESAME parents correctly
ok 3 - --parents --show-all does not rewrites TREESAME parents
# passed all 3 test(s)
1..3
ok 3 - repack does not lose detached HEAD
# passed all 3 test(s)
1..3
*** t6017-rev-list-stdin.sh ***
*** t6018-rev-list-glob.sh ***
ok 1 - setup
ok 2 - rev-parse --glob=refs/heads/subspace/*
ok 3 - rev-parse --glob=heads/subspace/*
ok 4 - rev-parse --glob=refs/heads/subspace/
ok 5 - rev-parse --glob=heads/subspace/
ok 6 - rev-parse --glob=heads/subspace
not ok 7 - rev-parse accepts --glob as detached option # TODO known breakage
not ok 8 - rev-parse is not confused by option-like glob # TODO known breakage
ok 9 - rev-parse --branches=subspace/*
ok 10 - rev-parse --branches=subspace/
ok 11 - rev-parse --branches=subspace
ok 12 - rev-parse --glob=heads/subspace/* --glob=heads/other/*
ok 13 - rev-parse --glob=heads/someref/* master
ok 14 - rev-parse --glob=heads/*
ok 16 - git_pull_ff: added submodule leaves existing empty directory alone
ok 15 - rev-parse --tags=foo
ok 1 - set up rev-list --graph test
ok 16 - rev-parse --remotes=foo
ok 2 - --graph --all
ok 17 - rev-parse --exclude with --branches
ok 18 - rev-parse --exclude with --all
ok 3 - --graph --simplify-by-decoration
ok 19 - rev-parse accumulates multiple --exclude
ok 4 - setup: get rid of decorations on B
ok 20 - rev-list --glob=refs/heads/subspace/*
ok 5 - --graph --simplify-by-decoration prune branch B
ok 21 - rev-list --glob refs/heads/subspace/*
ok 6 - --graph --full-history -- bar.txt
ok 22 - rev-list not confused by option-like --glob arg
ok 7 - --graph --full-history --simplify-merges -- bar.txt
ok 23 - rev-list --glob=heads/subspace/*
ok 8 - --graph -- bar.txt
ok 9 - --graph --sparse -- bar.txt
ok 24 - rev-list --glob=refs/heads/subspace/
ok 10 - --graph ^C4
ok 25 - rev-list --glob=heads/subspace/
ok 11 - --graph ^C3
ok 26 - rev-list --glob=heads/subspace
ok 12 - --graph --boundary ^C3
# passed all 12 test(s)
1..12
ok 27 - rev-list --branches=subspace/*
ok 28 - rev-list --branches=subspace/
*** t6019-rev-list-ancestry-path.sh ***
ok 29 - rev-list --branches=subspace
ok 30 - rev-list --branches
ok 31 - rev-list --glob=heads/someref/* master
ok 17 - git_pull_ff: added submodule doesn't remove untracked unignored file with same name
ok 1 - setup
ok 32 - rev-list --glob=heads/subspace/* --glob=heads/other/*
ok 33 - rev-list --glob=heads/*
ok 2 - check rev-list master
ok 34 - rev-list --tags=foo
ok 35 - rev-list --tags
ok 3 - check log --stat master
ok 36 - rev-list --remotes=foo
ok 4 - check rev-list side-1 ^side-4
ok 37 - rev-list --exclude with --branches
ok 38 - rev-list --exclude with --all
ok 5 - check log --stat side-1 ^side-4
ok 39 - rev-list accumulates multiple --exclude
not ok 40 - rev-list may want to succeed with empty output on no input (1) # TODO known breakage
not ok 41 - rev-list may want to succeed with empty output on no input (2) # TODO known breakage
ok 6 - check rev-list side-1 ^side-7 --
not ok 42 - rev-list may want to succeed with empty output on no input (3) # TODO known breakage
ok 7 - check log --stat side-1 ^side-7 --
ok 8 - check rev-list side-1 ^side-7 -- file-1
ok 9 - check log --stat side-1 ^side-7 -- file-1
ok 10 - check rev-list side-1 ^side-7 -- file-2
ok 11 - check log --stat side-1 ^side-7 -- file-2
ok 43 - shortlog accepts --glob/--tags/--remotes
not ok 44 - shortlog accepts --glob as detached option # TODO known breakage
ok 1 - setup
ok 12 - check rev-list side-3 ^side-4 -- file-3
not ok 45 - shortlog --glob is not confused by option-like argument # TODO known breakage
# still have 7 known breakage(s)
# passed all remaining 38 test(s)
1..45
ok 2 - rev-list D..M
ok 13 - check log --stat side-3 ^side-4 -- file-3
ok 3 - rev-list --ancestry-path D..M
*** t6020-merge-df.sh ***
ok 4 - rev-list D..M -- M.t
ok 14 - check rev-list side-3 ^side-2
ok 5 - rev-list --ancestry-path D..M -- M.t
ok 6 - rev-list F...I
ok 15 - check log --stat side-3 ^side-2
ok 7 - rev-list --ancestry-path F...I
ok 8 - rev-list G..M -- G.t
ok 9 - rev-list --ancestry-path G..M -- G.t
ok 16 - check rev-list side-3 ^side-2 -- file-1
ok 10 - rev-list --ancestry-path --simplify-merges G^..M -- G.t
ok 17 - check log --stat side-3 ^side-2 -- file-1
ok 1 - prepare repository
ok 18 - not only --stdin
# passed all 18 test(s)
1..18
ok 2 - Merge with d/f conflicts
*** t6021-merge-criss-cross.sh ***
ok 18 - git_pull_ff: replace tracked file with submodule creates empty directory
ok 3 - F/D conflict
ok 11 - setup criss-cross
ok 12 - criss-cross: rev-list --ancestry-path cb..bc
ok 13 - criss-cross: rev-list --ancestry-path --all ^cb
# passed all 13 test(s)
1..13
*** t6022-merge-rename.sh ***
ok 4 - setup modify/delete + directory/file conflict
ok 1 - prepare repository
ok 5 - modify/delete + directory/file conflict
ok 2 - Criss-cross merge
ok 3 - Criss-cross merge result
ok 6 - modify/delete + directory/file conflict; other way
# passed all 6 test(s)
1..6
*** t6023-merge-file.sh ***
ok 4 - Criss-cross merge fails (-s resolve)
# passed all 4 test(s)
1..4
*** t6024-recursive-merge.sh ***
ok 1 - merge with no changes
ok 2 - merge without conflict
ok 3 - works in subdirectory
ok 4 - merge without conflict (--quiet)
not ok 5 - merge without conflict (missing LF at EOF) # TODO known breakage
not ok 6 - merge result added missing LF # TODO known breakage
ok 7 - merge without conflict (missing LF at EOF, away from change in the other file)
ok 8 - merge does not add LF away of change
ok 9 - merge with conflicts
ok 10 - expected conflict markers
ok 11 - merge conflicting with --ours
ok 12 - merge conflicting with --theirs
ok 1 - setup
ok 13 - merge conflicting with --union
ok 14 - merge with conflicts, using -L
ok 15 - expected conflict markers, with -L
ok 16 - conflict in removed tail
ok 17 - expected conflict markers
ok 18 - binary files cannot be merged
ok 19 - MERGE_ZEALOUS simplifies non-conflicts
ok 20 - ZEALOUS_ALNUM
ok 21 - "diff3 -m" style output (1)
ok 22 - "diff3 -m" style output (2)
ok 23 - marker size
ok 24 - conflict at EOF without LF resolved by --ours
ok 25 - conflict at EOF without LF resolved by --theirs
ok 19 - git_pull_ff: replace directory with submodule
ok 26 - conflict at EOF without LF resolved by --union
# still have 2 known breakage(s)
# passed all remaining 24 test(s)
1..26
ok 2 - pull renaming branch into unrenaming one
ok 1 - setup tests
*** t6025-merge-symlinks.sh ***
ok 2 - combined merge conflicts
ok 3 - result contains a conflict
ok 4 - virtual trees were processed
ok 5 - refuse to merge binary files
ok 3 - pull renaming branch into another renaming one
ok 1 - setup
ok 2 - merge master into b-symlink, which has a different symbolic link
ok 3 - the merge result must be a file
ok 4 - merge master into b-file, which has a file instead of a symbolic link
ok 5 - the merge result must be a file
ok 6 - mark rename/delete as unmerged
# passed all 6 test(s)
1..6
ok 6 - merge b-file, which has a file instead of a symbolic link, into master
ok 7 - the merge result must be a file
# passed all 7 test(s)
1..7
*** t6026-merge-attr.sh ***
*** t6027-merge-binary.sh ***
ok 4 - pull unrenaming branch into renaming one
ok 1 - setup
ok 1 - setup
ok 2 - merge
ok 3 - check merge result in index
ok 4 - check merge result in working tree
ok 5 - retry the merge with longer context
ok 5 - pull conflicting renames
ok 2 - resolve
ok 3 - recursive
# passed all 3 test(s)
1..3
ok 20 - git_pull_ff: removed submodule leaves submodule directory and its contents in place
*** t6028-merge-up-to-date.sh ***
ok 6 - custom merge backend
ok 6 - interference with untracked working tree file
ok 7 - custom merge backend
ok 1 - setup
ok 2 - merge -s recursive up-to-date
ok 3 - merge -s recursive fast-forward
ok 7 - interference with untracked working tree file
ok 4 - merge -s ours up-to-date
ok 5 - merge -s ours fast-forward
ok 8 - up-to-date merge without common ancestor
# passed all 8 test(s)
1..8
ok 6 - merge -s subtree up-to-date
*** t6029-merge-subtree.sh ***
ok 7 - merge fast-forward octopus
# passed all 7 test(s)
1..7
*** t6030-bisect-porcelain.sh ***
ok 8 - interference with untracked working tree file
ok 1 - setup
ok 2 - subtree available and works like recursive
ok 1 - set up basic repo with 1 file (hello) and 4 commits
ok 9 - updated working tree file should prevent the merge
ok 3 - setup
ok 21 - git_pull_ff: removed submodule leaves submodule containing a .git directory alone
ok 4 - initial merge
ok 2 - bisect starts with only one bad
ok 10 - updated working tree file should prevent the merge
ok 5 - merge update
ok 11 - interference with untracked working tree file
ok 3 - bisect does not start with only one good
ok 6 - initial ambiguous subtree
ok 12 - merge of identical changes in a renamed file
ok 7 - merge using explicit
ok 13 - setup for rename + d/f conflicts
ok 8 - merge2 using explicit
ok 14 - Rename+D/F conflict; renamed file merges + dir not in way
# passed all 8 test(s)
1..8
ok 4 - bisect start with one bad and good
*** t6031-merge-recursive.sh ***
ok 22 - git_pull_ff: replace submodule with a directory must fail
ok 15 - Rename+D/F conflict; renamed file merges but dir in way
ok 16 - Same as previous, but merged other way
ok 1 - mode change in one branch: keep changed version
ok 2 - verify executable bit on file
ok 17 - Rename+D/F conflict; renamed file cannot merge, dir not in way
ok 18 - Rename+D/F conflict; renamed file cannot merge and dir in the way
ok 3 - mode change in both branches: expect conflict
ok 4 - verify executable bit on file
ok 19 - Same as previous, but merged other way
ok 5 - merging with triple rename across D/F conflict
# passed all 5 test(s)
1..5
*** t6032-merge-large-rename.sh ***
ok 20 - setup both rename source and destination involved in D/F conflict
ok 21 - both rename source and destination involved in D/F conflict
ok 1 - setup (initial)
ok 5 - bisect fails if given any junk instead of revs
ok 22 - setup pair rename to parent of other (D/F conflicts)
ok 23 - pair rename to parent of other (D/F conflicts) w/ untracked dir
ok 6 - bisect reset: back in the master branch
ok 2 - rename (5, ok)
ok 23 - git_pull_ff: replace submodule containing a .git directory with a directory must fail
ok 3 - set diff.renamelimit to 4
ok 24 - pair rename to parent of other (D/F conflicts) w/ clean start
ok 25 - setup rename of one file to two, with directories in the way
ok 4 - rename (4, ok)
ok 26 - check handling of differently renamed file with D/F conflicts
ok 7 - bisect reset: back in another branch
ok 27 - setup rename one file to two; directories moving out of the way
ok 8 - bisect reset when not bisecting
ok 28 - check handling of differently renamed file with D/F conflicts
ok 5 - rename (5, fail)
ok 6 - set merge.renamelimit to 5
ok 29 - setup avoid unnecessary update, normal rename
ok 30 - avoid unnecessary update, normal rename
not ok 24 - git_pull_ff: replace submodule with a file must fail # TODO known breakage
ok 7 - rename (5, ok)
ok 31 - setup to test avoiding unnecessary update, with D/F conflict
ok 32 - avoid unnecessary update, with D/F conflict
ok 9 - bisect reset removes packed refs
ok 8 - rename (6, fail)
ok 33 - setup avoid unnecessary update, dir->(file,nothing)
ok 34 - avoid unnecessary update, dir->(file,nothing)
ok 35 - setup avoid unnecessary update, modify/delete
ok 36 - avoid unnecessary update, modify/delete
ok 10 - bisect reset removes bisect state after --no-checkout
ok 37 - setup avoid unnecessary update, rename/add-dest
ok 38 - avoid unnecessary update, rename/add-dest
not ok 25 - git_pull_ff: replace submodule containing a .git directory with a file must fail # TODO known breakage
ok 39 - setup merge of rename + small change
ok 40 - merge rename + small change
ok 41 - setup for use of extended merge markers
ok 9 - setup large simple rename
ok 42 - merge master into rename has correct extended markers
ok 43 - merge rename into master has correct extended markers
ok 11 - bisect start: back in good branch
ok 44 - setup spurious "refusing to lose untracked" message
ok 45 - no spurious "refusing to lose untracked" message
ok 12 - bisect start: no ".git/BISECT_START" created if junk rev
ok 10 - massive simple rename does not spam added files
# passed all 10 test(s)
1..10
ok 46 - do not follow renames for empty files
# passed all 46 test(s)
1..46
*** t6033-merge-crlf.sh ***
*** t6034-merge-rename-nocruft.sh ***
ok 1 - setup
ok 13 - bisect start: existing ".git/BISECT_START" not modified if junk rev
ok 26 - git_pull_ff: modified submodule does not update submodule work tree
ok 2 - Check "ours" is CRLF
ok 3 - Check that conflict file is CRLF
ok 1 - setup
# passed all 3 test(s)
1..3
*** t6035-merge-dir-to-symlink.sh ***
ok 2 - merge white into red (A->B,M->N)
ok 3 - merge blue into white (A->B, mod A, A untracked)
# passed all 3 test(s)
1..3
*** t6036-recursive-corner-cases.sh ***
ok 1 - create a commit where dir a/b changed to symlink
ok 2 - checkout does not clobber untracked symlink
ok 3 - a/b-2/c/d is kept when clobbering symlink b
ok 4 - checkout should not have deleted a/b-2/c/d
ok 5 - setup for merge test
ok 1 - setup basic criss-cross + rename with no modifications
ok 14 - bisect start: no ".git/BISECT_START" if mistaken rev
ok 6 - Handle D/F conflict, do not lose a/b-2/c/d in merge (resolve)
ok 7 - a/b was resolved as symlink
ok 2 - merge simple rename+criss-cross with no modifications
ok 8 - Handle D/F conflict, do not lose a/b-2/c/d in merge (recursive)
ok 9 - a/b was resolved as symlink
ok 10 - Handle F/D conflict, do not lose a/b-2/c/d in merge (resolve)
ok 11 - a/b was resolved as symlink
ok 12 - Handle F/D conflict, do not lose a/b-2/c/d in merge (recursive)
ok 13 - a/b was resolved as symlink
ok 15 - bisect start: no ".git/BISECT_START" if checkout error
ok 3 - setup criss-cross + rename merges with basic modification
not ok 14 - do not lose untracked in merge (resolve) # TODO known breakage
ok 15 - do not lose untracked in merge (recursive)
ok 4 - merge criss-cross + rename merges with basic modification
ok 16 - do not lose modifications in merge (resolve)
ok 17 - do not lose modifications in merge (recursive)
ok 27 - git_pull_ff: modified submodule does not update submodule work tree to invalid commit
ok 18 - setup a merge where dir a/b-2 changed to symlink
ok 19 - merge should not have D/F conflicts (resolve)
ok 20 - a/b-2 was resolved as symlink
ok 5 - setup differently handled merges of rename/add conflict
ok 21 - merge should not have D/F conflicts (recursive)
ok 22 - a/b-2 was resolved as symlink
ok 16 - bisect skip: successful result
ok 23 - merge should not have F/D conflicts (recursive)
ok 24 - a/b-2 was resolved as symlink
# still have 1 known breakage(s)
# passed all remaining 23 test(s)
1..24
ok 6 - git detects differently handled merges conflict
*** t6037-merge-ours-theirs.sh ***
ok 1 - setup
ok 2 - plain recursive - should conflict
ok 3 - recursive favouring theirs
ok 7 - setup criss-cross + modify/delete resolved differently
ok 4 - recursive favouring ours
ok 8 - git detects conflict merging criss-cross+modify/delete
ok 5 - binary file with -Xours/-Xtheirs
ok 9 - git detects conflict merging criss-cross+modify/delete, reverse direction
ok 17 - bisect skip: cannot tell between 3 commits
ok 28 - git_pull_ff: modified submodule does not update submodule work tree from invalid commit
ok 10 - setup differently handled merges of content conflict
not ok 11 - git detects conflict w/ criss-cross+contrived resolution # TODO known breakage
ok 18 - bisect skip: cannot tell between 2 commits
ok 12 - setup differently handled merges of directory/file conflict
ok 6 - pull passes -X to underlying merge
# passed all 6 test(s)
1..6
*** t6038-merge-text-auto.sh ***
ok 13 - merge of D & E1 fails but has appropriate contents
ok 29 - git_pull_ff_only: added submodule creates empty directory
ok 14 - merge of E1 & D fails but has appropriate contents
ok 15 - merge of D & E2 fails but has appropriate contents
ok 1 - setup
ok 2 - set up fuzz_conflict() helper
ok 3 - Merge after setting text=auto
ok 16 - merge of E2 & D fails but has appropriate contents
ok 4 - Merge addition of text=auto
ok 19 - bisect skip: with commit both bad and skipped
ok 5 - Detect CRLF/LF conflict after setting text=auto
ok 6 - Detect LF/CRLF conflict from addition of text=auto
not ok 7 - checkout -m after setting text=auto # TODO known breakage
not ok 8 - checkout -m addition of text=auto # TODO known breakage
ok 17 - setup rename/rename(1to2)/modify followed by what looks like rename/rename(2to1)/modify
not ok 9 - cherry-pick patch from after text=auto was added # TODO known breakage
ok 18 - handle rename/rename(1to2)/modify followed by what looks like rename/rename(2to1)/modify
ok 10 - Test delete/normalize conflict
# still have 3 known breakage(s)
# passed all remaining 7 test(s)
1..10
*** t6039-merge-ignorecase.sh ***
ok 30 - git_pull_ff_only: added submodule leaves existing empty directory alone
1..0 # SKIP skipping case insensitive tests - case sensitive file system
*** t6040-tracking-info.sh ***
ok 20 - "git bisect run" simple case
ok 19 - setup criss-cross + rename/rename/add + modify/modify
not ok 20 - detect rename/rename/add-source for virtual merge-base # TODO known breakage
ok 31 - git_pull_ff_only: added submodule doesn't remove untracked unignored file with same name
ok 1 - setup
ok 2 - branch -v
ok 21 - setup criss-cross+rename/rename/add-dest + simple modify
ok 3 - branch -vv
ok 21 - "git bisect run" with more complex "git bisect start"
ok 4 - checkout (diverged from upstream)
ok 5 - checkout with local tracked branch
ok 6 - checkout (upstream is gone)
ok 22 - virtual merge base handles rename/rename(1to2)/add-dest
# still have 2 known breakage(s)
# passed all remaining 20 test(s)
1..22
ok 7 - checkout (up-to-date with upstream)
*** t6041-bisect-submodule.sh ***
ok 8 - status (diverged from upstream)
ok 9 - status (upstream is gone)
ok 10 - status (up-to-date with upstream)
ok 11 - status -s -b (diverged from upstream)
ok 12 - status -s -b (upstream is gone)
ok 13 - status -s -b (up-to-date with upstream)
ok 14 - fail to track lightweight tags
ok 15 - fail to track annotated tags
ok 16 - setup tracking with branch --set-upstream on existing branch
ok 17 - --set-upstream does not change branch
ok 22 - bisect skip: add line and then a new test
ok 18 - --set-upstream @{-1}
# passed all 18 test(s)
1..18
ok 32 - git_pull_ff_only: replace tracked file with submodule creates empty directory
*** t6042-merge-rename-corner-cases.sh ***
ok 1 - setup rename/delete + untracked file
ok 2 - Does git preserve Gollum's precious artifact?
ok 23 - bisect skip and bisect replay
ok 3 - setup rename/modify/add-source conflict
not ok 4 - rename/modify/add-source conflict resolvable # TODO known breakage
ok 5 - setup resolvable conflict missed if rename missed
not ok 6 - conflict caused if rename not detected # TODO known breakage
ok 7 - setup conflict resolved wrong if rename missed
not ok 8 - missed conflict if rename not detected # TODO known breakage
ok 33 - git_pull_ff_only: replace directory with submodule
ok 24 - bisect run & skip: cannot tell between 2
ok 9 - setup undetected rename/add-source causes data loss
not ok 10 - detect rename/add-source and preserve all data # TODO known breakage
not ok 11 - detect rename/add-source and preserve all data, merge other way # TODO known breakage
ok 12 - setup content merge + rename/directory conflict
ok 13 - rename/directory conflict + clean content merge
ok 14 - rename/directory conflict + content merge conflict
ok 34 - git_pull_ff_only: removed submodule leaves submodule directory and its contents in place
ok 15 - setup content merge + rename/directory conflict w/ disappearing dir
ok 25 - bisect run & skip: find first bad
ok 16 - disappearing dir in rename/directory conflict handled
ok 1 - git_bisect: added submodule creates empty directory
ok 17 - setup rename/rename (2to1) + modify/modify
ok 18 - handle rename/rename (2to1) conflict correctly
ok 19 - setup simple rename/rename (1to2) conflict
ok 20 - merge has correct working tree contents
ok 26 - bisect skip only one range
ok 21 - setup rename/rename(1to2)/add-source conflict
not ok 22 - detect conflict with rename/rename(1to2)/add-source merge # TODO known breakage
ok 35 - git_pull_ff_only: removed submodule leaves submodule containing a .git directory alone
ok 23 - setup rename/rename(1to2)/add-source resolvable conflict
not ok 24 - rename/rename/add-source still tracks new a file # TODO known breakage
ok 25 - setup rename/rename(1to2)/add-dest conflict
ok 2 - git_bisect: added submodule leaves existing empty directory alone
ok 27 - bisect skip many ranges
ok 26 - rename/rename/add-dest merge still knows about conflicting file versions
# still have 7 known breakage(s)
# passed all remaining 19 test(s)
1..26
*** t6050-replace.sh ***
ok 3 - git_bisect: added submodule doesn't remove untracked unignored file with same name
ok 28 - bisect starting with a detached HEAD
ok 36 - git_pull_ff_only: replace submodule with a directory must fail
ok 1 - set up buggy branch
ok 2 - replace the author
ok 3 - test --no-replace-objects option
ok 4 - test GIT_NO_REPLACE_OBJECTS env variable
ok 5 - tag replaced commit
ok 6 - "git fsck" works
ok 29 - bisect errors out if bad and good are mistaken
ok 7 - repack, clone and fetch work
ok 8 - "git replace" listing and deleting
ok 9 - "git replace" replacing
ok 10 - "git replace" resolves sha1
ok 30 - bisect does not create a "bisect" branch
ok 4 - git_bisect: replace tracked file with submodule creates empty directory
ok 37 - git_pull_ff_only: replace submodule containing a .git directory with a directory must fail
ok 31 - side branch creation
ok 11 - create parallel branch without the bug
ok 12 - push to cloned repo
ok 13 - push branch with replacement
ok 32 - good merge base when good and bad are siblings
ok 14 - fetch branch with replacement
not ok 38 - git_pull_ff_only: replace submodule with a file must fail # TODO known breakage
ok 33 - skipped merge base when good and bad are siblings
ok 5 - git_bisect: replace directory with submodule
ok 34 - bad merge base when good and bad are siblings
ok 15 - bisect and replacements
ok 35 - many merge bases creation
ok 16 - index-pack and replacements
ok 17 - not just commits
ok 18 - replaced and replacement objects must be of the same type
ok 19 - -f option bypasses the type check
ok 20 - git cat-file --batch works on replace objects
ok 21 - test --format bogus
ok 22 - test --format short
not ok 39 - git_pull_ff_only: replace submodule containing a .git directory with a file must fail # TODO known breakage
ok 23 - test --format medium
ok 24 - test --format long
ok 25 - setup a fake editor
ok 36 - good merge bases when good and bad are siblings
ok 26 - --edit with and without already replaced object
ok 27 - --edit and change nothing or command failed
ok 28 - replace ref cleanup
ok 29 - --graft with and without already replaced object
ok 30 - set up a signed commit
ok 6 - git_bisect: removed submodule leaves submodule directory and its contents in place
ok 31 - --graft with a signed commit
ok 37 - optimized merge base checks
ok 32 - set up a merge commit with a mergetag
ok 33 - --graft on a commit with a mergetag
# passed all 33 test(s)
1..33
*** t6060-merge-index.sh ***
ok 38 - "parallel" side branch creation
ok 40 - git_pull_ff_only: modified submodule does not update submodule work tree
ok 1 - setup diverging branches
ok 2 - read-tree does not resolve content merge
ok 3 - git merge-index git-merge-one-file resolves
ok 4 - setup bare merge
ok 5 - merge-one-file fails without a work tree
ok 39 - restricting bisection on one dir
ok 6 - merge-one-file respects GIT_WORK_TREE
ok 7 - merge-one-file respects core.worktree
# passed all 7 test(s)
1..7
*** t6101-rev-parse-parents.sh ***
ok 7 - git_bisect: removed submodule leaves submodule containing a .git directory alone
ok 41 - git_pull_ff_only: modified submodule does not update submodule work tree to invalid commit
ok 40 - restricting bisection on one dir and a file
ok 8 - git_bisect: replace submodule with a directory must fail
ok 41 - skipping away from skipped commit
ok 42 - erroring out when using bad path parameters
ok 42 - git_pull_ff_only: modified submodule does not update submodule work tree from invalid commit
ok 1 - setup
ok 2 - start is valid
ok 3 - start^0
ok 4 - start^1 not valid
ok 5 - second^1 = second^
ok 6 - final^1^1^1
ok 7 - final^1^1^1 = final^^^
ok 8 - final^1^2
ok 9 - final^1^2 != final^1^1
ok 10 - final^1^3 not valid
ok 11 - --verify start2^1
ok 12 - --verify start2^0
ok 13 - final^1^@ = final^1^1 final^1^2
ok 14 - final^1^! = final^1 ^final^1^1 ^final^1^2
ok 9 - git_bisect: replace submodule containing a .git directory with a directory must fail
ok 15 - large graft octopus
ok 43 - test bisection on bare repo - --no-checkout specified
ok 16 - repack for next test
ok 17 - short SHA-1 works
# passed all 17 test(s)
1..17
*** t6110-rev-list-sparse.sh ***
ok 43 - git_pull_noff: added submodule creates empty directory
ok 1 - setup
ok 2 - rev-list --first-parent --boundary
# passed all 2 test(s)
1..2
*** t6111-rev-list-treesame.sh ***
ok 44 - test bisection on bare repo - --no-checkout defaulted
ok 45 - broken branch creation
not ok 10 - git_bisect: replace submodule with a file must fail # TODO known breakage
ok 1 - setup
ok 46 - bisect fails if tree is broken on start commit
ok 2 - log
ok 44 - git_pull_noff: added submodule leaves existing empty directory alone
ok 3 - log
ok 4 - log --topo-order
ok 5 - log -- file
ok 6 - log --parents -- file
ok 7 - log --full-history -- file
ok 8 - log --full-history --parents -- file
ok 9 - log --simplify-merges -- file
ok 10 - log --first-parent
ok 11 - log --first-parent -- file
ok 12 - log F..M
ok 13 - log F..M --topo-order
ok 47 - bisect fails if tree is broken on trial commit
ok 14 - log F..M -- file
ok 15 - log --parents F..M -- file
ok 16 - log F..M --full-history -- file
ok 17 - log F..M --full-history --parents -- file
ok 18 - log F..M --simplify-merges -- file
ok 45 - git_pull_noff: added submodule doesn't remove untracked unignored file with same name
ok 19 - log F..M --ancestry-path
ok 20 - log F..M --ancestry-path -- file
ok 21 - log F..M --ancestry-path --parents -- file
ok 22 - log F..M --ancestry-path --simplify-merges -- file
ok 23 - log F..M --first-parent
ok 24 - log F..M --first-parent -- file
ok 25 - log E..M --ancestry-path
ok 26 - log E..M --ancestry-path -- file
ok 48 - bisect: --no-checkout - start commit bad
ok 27 - log E..M --ancestry-path --parents -- file
ok 28 - log E..M --ancestry-path --simplify-merges -- file
ok 29 - log G..M
ok 30 - log G..M --topo-order
ok 31 - log G..M -- file
ok 32 - log G..M --parents -- file
ok 33 - log G..M --full-history -- file
ok 34 - log G..M --full-history --parents -- file
ok 35 - log G..M --simplify-merges -- file
ok 36 - log G..M --ancestry-path
ok 37 - log G..M --ancestry-path -- file
ok 38 - log G..M --ancestry-path --parents -- file
ok 39 - log G..M --ancestry-path --simplify-merges -- file
ok 40 - log B..F
ok 49 - bisect: --no-checkout - trial commit bad
ok 41 - log B..F -- file
ok 42 - log B..F --parents -- file
ok 43 - log B..F --full-history -- file
ok 44 - log B..F --full-history --parents -- file
ok 45 - log B..F --simplify-merges -- file
ok 46 - log B..F --ancestry-path
ok 47 - log B..F --ancestry-path -- file
ok 48 - log B..F --ancestry-path --parents -- file
ok 49 - log B..F --ancestry-path --simplify-merges -- file
ok 50 - log B..F --first-parent
ok 51 - log B..F --first-parent -- file
ok 52 - log E F ^B -- file
ok 53 - log E...F -- file
not ok 11 - git_bisect: replace submodule containing a .git directory with a file must fail # TODO known breakage
ok 54 - log C..F
ok 55 - log C..F -- file
ok 56 - log C..F --parents -- file
ok 46 - git_pull_noff: replace tracked file with submodule creates empty directory
ok 57 - log C..F --full-history -- file
ok 58 - log C..F --full-history --parents -- file
ok 59 - log C..F --simplify-merges -- file
ok 60 - log C..F --ancestry-path
ok 61 - log C..F --ancestry-path -- file
ok 62 - log C..F --ancestry-path --parents -- file
ok 63 - log C..F --ancestry-path --simplify-merges -- file
ok 64 - log C..F --first-parent
ok 65 - log C..F --first-parent -- file
# passed all 65 test(s)
1..65
ok 50 - bisect: --no-checkout - target before breakage
*** t6120-describe.sh ***
not ok 47 - git_pull_noff: replace directory with submodule # TODO known breakage
ok 1 - setup
ok 2 - describe HEAD
ok 3 - describe HEAD^
ok 4 - describe HEAD^^
ok 5 - describe HEAD^^2
ok 6 - describe HEAD^^2^
ok 7 - describe HEAD^^^
ok 8 - describe --tags HEAD
ok 9 - describe --tags HEAD^
ok 10 - describe --tags HEAD^^
ok 11 - describe --tags HEAD^^2
ok 51 - bisect: --no-checkout - target in breakage
ok 12 - describe --tags HEAD^^2^
ok 13 - describe --tags HEAD^^^
ok 14 - describe --all HEAD
ok 15 - describe --all HEAD^
ok 16 - describe --all HEAD^^^
ok 17 - describe --long HEAD^^2^
ok 18 - describe --long HEAD^^2
ok 19 - describe --tags
ok 20 - describe --first-parent --tags
ok 21 - describe --all A^0
ok 22 - no warning was displayed for A
ok 23 - rename tag A to Q locally
ok 24 - describe HEAD
ok 25 - warning was displayed for Q
ok 26 - rename tag Q back to A
ok 27 - pack tag refs
ok 28 - describe HEAD
ok 29 - describe --dirty
ok 30 - set-up dirty work tree
ok 31 - describe --dirty
ok 32 - describe --dirty=.mod
ok 33 - describe --dirty HEAD
ok 34 - set-up matching pattern tests
ok 35 - describe --match=test-*
ok 36 - describe --tags --match=test1-*
ok 37 - describe --tags --match=test2-*
ok 38 - describe --long --tags --match=test2-* HEAD^
ok 48 - git_pull_noff: removed submodule leaves submodule directory and its contents in place
ok 39 - name-rev with exact tags
ok 40 - describe --contains with the exact tags
# passed all 40 test(s)
1..40
*** t6130-pathspec-noglob.sh ***
ok 12 - git_bisect: modified submodule does not update submodule work tree
ok 52 - bisect: --no-checkout - target after breakage
ok 1 - create commits with glob characters
ok 2 - vanilla pathspec matches literally
ok 3 - star pathspec globs
ok 4 - star pathspec globs
ok 5 - bracket pathspec globs and matches literal brackets
ok 6 - bracket pathspec globs and matches literal brackets
ok 7 - no-glob option matches literally (vanilla)
ok 8 - no-glob option matches literally (vanilla)
ok 9 - no-glob option matches literally (star)
ok 10 - no-glob option matches literally (star)
ok 11 - no-glob option matches literally (bracket)
ok 12 - no-glob option matches literally (bracket)
ok 13 - no-glob option disables :(literal)
ok 14 - no-glob environment variable works
ok 15 - blame takes global pathspec flags
ok 16 - setup xxx/bar
ok 17 - **/ works with :(glob)
ok 18 - **/ does not work with --noglob-pathspecs
ok 19 - **/ works with :(glob) and --noglob-pathspecs
ok 20 - **/ works with --glob-pathspecs
ok 21 - **/ does not work with :(literal) and --glob-pathspecs
# passed all 21 test(s)
1..21
*** t6131-pathspec-icase.sh ***
ok 53 - bisect: demonstrate identification of damage boundary
ok 49 - git_pull_noff: removed submodule leaves submodule containing a .git directory alone
ok 1 - create commits with glob characters
ok 2 - tree_entry_interesting matches bar
ok 3 - tree_entry_interesting matches :(icase)bar
ok 4 - tree_entry_interesting matches :(icase)bar with prefix
ok 54 - bisect log: successfull result
ok 5 - tree_entry_interesting matches :(icase)bar with empty prefix
ok 6 - match_pathspec matches :(icase)bar
ok 7 - match_pathspec matches :(icase)bar with prefix
ok 8 - match_pathspec matches :(icase)bar with empty prefix
ok 9 - "git diff" can take magic :(icase) pathspec
# passed all 9 test(s)
1..9
*** t6132-pathspec-exclude.sh ***
ok 13 - git_bisect: modified submodule does not update submodule work tree to invalid commit
ok 1 - setup
ok 2 - exclude only should error out
not ok 50 - git_pull_noff: replace submodule with a directory must fail # TODO known breakage
ok 3 - t_e_i() exclude sub
ok 4 - t_e_i() exclude sub/sub/file
ok 5 - t_e_i() exclude sub using mnemonic
ok 6 - t_e_i() exclude :(icase)SUB
ok 7 - t_e_i() exclude sub2 from sub
ok 8 - t_e_i() exclude sub/*file
ok 9 - t_e_i() exclude :(glob)sub/*/file
ok 55 - bisect log: only skip commits left
# passed all 55 test(s)
1..55
ok 10 - m_p_d() exclude sub
ok 11 - m_p_d() exclude sub/sub/file
ok 12 - m_p_d() exclude sub using mnemonic
ok 13 - m_p_d() exclude :(icase)SUB
ok 14 - m_p_d() exclude sub2 from sub
ok 15 - m_p_d() exclude sub/*file
ok 16 - m_p_d() exclude :(glob)sub/*/file
# passed all 16 test(s)
1..16
*** t6200-fmt-merge-msg.sh ***
*** t6300-for-each-ref.sh ***
ok 1 - setup
ok 2 - basic atom: head refname
ok 3 - basic atom: head upstream
ok 4 - basic atom: head objecttype
ok 5 - basic atom: head objectsize
ok 6 - basic atom: head objectname
ok 7 - basic atom: head tree
ok 8 - basic atom: head parent
ok 9 - basic atom: head numparent
ok 10 - basic atom: head object
ok 11 - basic atom: head type
ok 12 - basic atom: head *objectname
ok 13 - basic atom: head *objecttype
ok 14 - basic atom: head author
ok 15 - basic atom: head authorname
ok 16 - basic atom: head authoremail
ok 17 - basic atom: head authordate
ok 18 - basic atom: head committer
ok 19 - basic atom: head committername
ok 20 - basic atom: head committeremail
ok 21 - basic atom: head committerdate
not ok 51 - git_pull_noff: replace submodule containing a .git directory with a directory must fail # TODO known breakage
ok 22 - basic atom: head tag
ok 23 - basic atom: head tagger
ok 24 - basic atom: head taggername
ok 25 - basic atom: head taggeremail
ok 26 - basic atom: head taggerdate
ok 14 - git_bisect: modified submodule does not update submodule work tree from invalid commit
ok 27 - basic atom: head creator
# still have 2 known breakage(s)
# passed all remaining 12 test(s)
1..14
ok 28 - basic atom: head creatordate
ok 29 - basic atom: head subject
ok 30 - basic atom: head contents:subject
*** t6500-gc.sh ***
ok 31 - basic atom: head body
ok 32 - basic atom: head contents:body
ok 33 - basic atom: head contents:signature
ok 34 - basic atom: head contents
ok 35 - basic atom: head HEAD
ok 36 - basic atom: tag refname
ok 1 - gc empty repository
ok 37 - basic atom: tag upstream
ok 38 - basic atom: tag objecttype
ok 39 - basic atom: tag objectsize
ok 2 - gc does not leave behind pid file
ok 3 - gc --gobbledegook
ok 40 - basic atom: tag objectname
ok 41 - basic atom: tag tree
ok 4 - gc -h with invalid configuration
# passed all 4 test(s)
1..4
ok 42 - basic atom: tag parent
*** t7001-mv.sh ***
ok 43 - basic atom: tag numparent
ok 44 - basic atom: tag object
ok 45 - basic atom: tag type
ok 46 - basic atom: tag *objectname
ok 47 - basic atom: tag *objecttype
ok 1 - prepare reference tree
ok 2 - moving the file out of subdirectory
ok 48 - basic atom: tag author
ok 3 - commiting the change
ok 49 - basic atom: tag authorname
ok 4 - checking the commit
ok 5 - moving the file back into subdirectory
ok 50 - basic atom: tag authoremail
ok 6 - commiting the change
ok 51 - basic atom: tag authordate
ok 7 - checking the commit
ok 8 - checking -k on non-existing file
ok 9 - checking -k on untracked file
ok 52 - basic atom: tag committer
ok 10 - checking -k on multiple untracked files
ok 11 - checking -f on untracked file with existing target
ok 53 - basic atom: tag committername
ok 54 - basic atom: tag committeremail
ok 12 - moving to absent target with trailing slash
ok 55 - basic atom: tag committerdate
ok 13 - clean up
ok 14 - moving to existing untracked target with trailing slash
ok 56 - basic atom: tag tag
ok 15 - moving to existing tracked target with trailing slash
ok 57 - basic atom: tag tagger
ok 16 - clean up
ok 1 - setup
not ok 52 - git_pull_noff: replace submodule with a file must fail # TODO known breakage
ok 58 - basic atom: tag taggername
ok 17 - adding another file
ok 59 - basic atom: tag taggeremail
ok 18 - moving whole subdirectory
ok 60 - basic atom: tag taggerdate
ok 19 - commiting the change
ok 61 - basic atom: tag creator
ok 20 - checking the commit
ok 2 - message for merging local branch
ok 21 - succeed when source is a prefix of destination
ok 62 - basic atom: tag creatordate
ok 22 - moving whole subdirectory into subdirectory
ok 63 - basic atom: tag subject
ok 23 - commiting the change
ok 24 - checking the commit
ok 64 - basic atom: tag contents:subject
ok 25 - do not move directory over existing directory
ok 65 - basic atom: tag body
ok 26 - move into "."
ok 66 - basic atom: tag contents:body
ok 3 - message for merging external branch
ok 67 - basic atom: tag contents:signature
ok 68 - basic atom: tag contents
ok 69 - basic atom: tag HEAD
ok 70 - Check invalid atoms names are errors
ok 27 - Michael Cassar's test case
ok 71 - Check format specifiers are ignored in naming date atoms
ok 28 - Sergey Vlasov's test case
ok 72 - Check valid format specifiers for date fields
ok 73 - Check invalid format specifiers are errors
ok 74 - Check unformatted date fields output
ok 29 - absolute pathname
ok 4 - [merge] summary/log configuration
ok 75 - Check format "default" formatted date fields output
ok 76 - Check format "relative" date fields output
ok 30 - absolute pathname outside should fail
ok 77 - Check format "short" date fields output
ok 5 - setup FETCH_HEAD
ok 78 - Check format "local" date fields output
ok 31 - git mv to move multiple sources into a directory
ok 6 - merge.log=3 limits shortlog length
ok 79 - Check format "iso8601" date fields output
ok 7 - merge.log=5 shows all 5 commits
ok 8 - --log=5 with custom comment character
ok 80 - Check format "rfc2822" date fields output
ok 9 - merge.log=0 disables shortlog
ok 81 - Verify ascending sort
ok 10 - --log=3 limits shortlog length
ok 82 - Verify descending sort
ok 32 - git mv should not change sha1 of moved cache entry
ok 83 - Quoting style: shell
ok 11 - --log=5 shows all 5 commits
ok 84 - Quoting style: perl
ok 12 - --no-log disables shortlog
ok 85 - Quoting style: python
ok 13 - --log=0 disables shortlog
ok 86 - Quoting style: tcl
ok 87 - more than one quoting style: --perl --shell
ok 88 - more than one quoting style: -s --python
ok 89 - more than one quoting style: --python --tcl
ok 90 - more than one quoting style: --tcl --perl
ok 33 - git mv should overwrite symlink to a file
ok 91 - Check short refname format
ok 92 - Check short upstream format
ok 93 - setup for upstream:track[short]
ok 94 - Check upstream:track format
ok 34 - git mv should overwrite file with a symlink
ok 35 - check moved symlink
ok 95 - Check upstream:trackshort format
ok 14 - fmt-merge-msg -m
ok 15 - setup: expected shortlog for two branches
ok 96 - Check that :track[short] cannot be used with other atoms
ok 97 - Check short objectname format
ok 98 - Check for invalid refname format
not ok 53 - git_pull_noff: replace submodule containing a .git directory with a file must fail # TODO known breakage
ok 99 - Check %(color:...)
ok 100 - Check ambiguous head and tag refs (strict)
ok 101 - Check ambiguous head and tag refs (loose)
ok 36 - setup submodule
ok 37 - git mv cannot move a submodule in a file
ok 102 - Check ambiguous head and tag refs II (loose)
ok 103 - an unusual tag with an incomplete line
ok 104 - create tag with subject and body content
ok 105 - basic atom: refs/tags/subject-body subject
ok 38 - git mv moves a submodule with a .git directory and no .gitmodules
ok 106 - basic atom: refs/tags/subject-body body
ok 107 - basic atom: refs/tags/subject-body contents
ok 16 - shortlog for two branches
ok 108 - create tag with multiline subject
ok 109 - basic atom: refs/tags/multiline subject
ok 110 - basic atom: refs/tags/multiline contents:subject
ok 111 - basic atom: refs/tags/multiline body
ok 112 - basic atom: refs/tags/multiline contents:body
ok 17 - merge-msg -F
ok 113 - basic atom: refs/tags/multiline contents:signature
ok 114 - basic atom: refs/tags/multiline contents
ok 115 - create signed tags
ok 18 - merge-msg -F in subdirectory
ok 116 - basic atom: refs/tags/signed-empty subject
ok 117 - basic atom: refs/tags/signed-empty contents:subject
ok 39 - git mv moves a submodule with a .git directory and .gitmodules
ok 118 - basic atom: refs/tags/signed-empty body
ok 119 - basic atom: refs/tags/signed-empty contents:body
ok 120 - basic atom: refs/tags/signed-empty contents:signature
ok 121 - basic atom: refs/tags/signed-empty contents
ok 122 - basic atom: refs/tags/signed-short subject
ok 123 - basic atom: refs/tags/signed-short contents:subject
ok 124 - basic atom: refs/tags/signed-short body
ok 125 - basic atom: refs/tags/signed-short contents:body
ok 126 - basic atom: refs/tags/signed-short contents:signature
ok 127 - basic atom: refs/tags/signed-short contents
ok 128 - basic atom: refs/tags/signed-long subject
ok 129 - basic atom: refs/tags/signed-long contents:subject
ok 130 - basic atom: refs/tags/signed-long body
ok 131 - basic atom: refs/tags/signed-long contents:body
ok 132 - basic atom: refs/tags/signed-long contents:signature
ok 40 - git mv moves a submodule with gitfile
ok 133 - basic atom: refs/tags/signed-long contents
ok 19 - merge-msg with nothing to merge
ok 134 - Verify sort with multiple keys
# passed all 134 test(s)
1..134
*** t7003-filter-branch.sh ***
ok 54 - git_pull_noff: modified submodule does not update submodule work tree
ok 20 - merge-msg tag
ok 21 - merge-msg two tags
ok 41 - mv does not complain when no .gitmodules file is found
ok 22 - merge-msg tag and branch
ok 1 - setup
ok 23 - merge-msg lots of commits
ok 42 - mv will error out on a modified .gitmodules file unless staged
ok 24 - merge-msg with "merging" an annotated tag
# passed all 24 test(s)
1..24
*** t7004-tag.sh ***
ok 1 - listing all tags in an empty tree should succeed
ok 43 - mv issues a warning when section is not found in .gitmodules
ok 2 - listing all tags in an empty tree should output nothing
ok 3 - looking for a tag in an empty tree should fail
ok 4 - creating a tag in an empty tree should fail
ok 5 - creating a tag for HEAD in an empty tree should fail
ok 6 - creating a tag for an unknown revision should fail
ok 7 - creating a tag using default HEAD should succeed
ok 8 - listing all tags if one exists should succeed
ok 9 - listing all tags if one exists should output that tag
ok 10 - listing a tag using a matching pattern should succeed
ok 11 - listing a tag using a matching pattern should output that tag
ok 2 - rewrite identically
ok 12 - listing tags using a non-matching pattern should suceed
ok 3 - result is really identical
ok 13 - listing tags using a non-matching pattern should output nothing
ok 14 - trying to create a tag with the name of one existing should fail
ok 15 - trying to create a tag with a non-valid name should fail
ok 16 - creating a tag using HEAD directly should succeed
ok 17 - --force can create a tag with the name of one existing
ok 44 - mv --dry-run does not touch the submodule or .gitmodules
ok 55 - git_pull_noff: modified submodule does not update submodule work tree to invalid commit
ok 18 - --force is moot with a non-existing tag name
Deleted tag 'newtag' (was 86e17e4)
Deleted tag 'forcetag' (was 86e17e4)
ok 19 - trying to delete an unknown tag should fail
ok 20 - trying to delete tags without params should succeed and do nothing
ok 21 - deleting two existing tags in one command should succeed
ok 22 - creating a tag with the name of another deleted one should succeed
ok 23 - trying to delete two tags, existing and not, should fail in the 2nd
ok 24 - trying to delete an already deleted tag should fail
ok 25 - listing all tags should print them ordered
ok 26 - listing tags with substring as pattern must print those matching
ok 45 - checking out a commit before submodule moved needs manual updates
ok 27 - listing tags with a suffix as pattern must print those matching
ok 28 - listing tags with a prefix as pattern must print those matching
ok 29 - listing tags using a name as pattern must print that one matching
ok 30 - listing tags using a name as pattern must print that one matching
ok 31 - listing tags with ? in the pattern should print those matching
ok 32 - listing tags using v.* should print nothing because none have v.
ok 33 - listing tags using v* should print only those having v
ok 46 - mv -k does not accidentally destroy submodules
ok 34 - tag -l can accept multiple patterns
# passed all 46 test(s)
1..46
ok 35 - listing tags in column
*** t7005-editor.sh ***
ok 4 - rewrite bare repository identically
ok 36 - listing tags in column with column.*
ok 5 - result is really identical
ok 37 - listing tag with -n --column should fail
ok 38 - listing tags -n in column with column.ui ignored
ok 1 - determine default editor
ok 39 - a non-annotated tag created without parameters should point to HEAD
ok 40 - trying to verify an unknown tag should fail
ok 41 - trying to verify a non-annotated and non-signed tag should fail
ok 42 - trying to verify many non-annotated or unknown tags, should fail
ok 2 - setup
ok 3 - dumb should error out when falling back on vi
ok 43 - creating an annotated tag with -m message should succeed
ok 4 - dumb should prefer EDITOR to VISUAL
ok 44 - creating an annotated tag with -F messagefile should succeed
ok 5 - Using editor
ok 45 - creating an annotated tag with -F - should succeed
ok 46 - trying to create a tag with a non-existing -F file should fail
ok 6 - correct GIT_DIR while using -d
ok 6 - Using EDITOR
ok 47 - trying to create tags giving both -m or -F options should fail
ok 7 - Using VISUAL
ok 48 - creating a tag with an empty -m message should succeed
ok 49 - creating a tag with an empty -F messagefile should succeed
ok 8 - Using core_editor
ok 50 - extra blanks in the message for an annotated tag should be removed
ok 9 - Using GIT_EDITOR
ok 56 - git_pull_noff: modified submodule does not update submodule work tree from invalid commit
ok 51 - creating a tag with blank -m message with spaces should succeed
# still have 11 known breakage(s)
# passed all remaining 45 test(s)
1..56
ok 52 - creating a tag with blank -F messagefile with spaces should succeed
ok 10 - Using editor (override)
ok 53 - creating a tag with -F file of spaces and no newline should succeed
ok 11 - Using EDITOR (override)
ok 54 - creating a tag using a -F messagefile with #comments should succeed
ok 12 - Using VISUAL (override)
*** t7006-pager.sh ***
ok 55 - creating a tag with a #comment in the -m message should succeed
ok 56 - creating a tag with #comments in the -F messagefile should succeed
ok 13 - Using core_editor (override)
ok 57 - creating a tag with a file of #comment and no newline should succeed
ok 14 - Using GIT_EDITOR (override)
ok 1 - determine default pager
ok 7 - tree-filter works with -d
ok 15 - editor with a space
ok 2 - setup
ok 16 - core.editor with a space
# passed all 16 test(s)
1..16
*** t7007-show.sh ***
ok 58 - listing the one-line message of a non-signed tag should succeed
ok 1 - setup
ok 2 - showing a tag that point at a missing object
ok 8 - Fail if commit filter fails
ok 59 - listing the zero-lines message of a non-signed tag should succeed
ok 60 - listing many message lines of a non-signed tag should succeed
ok 3 - set up a bit of history
ok 61 - annotations for blobs are empty
ok 62 - trying to verify an annotated non-signed tag should fail
ok 4 - showing two commits
ok 63 - trying to verify a file-annotated non-signed tag should fail
ok 5 - showing a range walks (linear)
ok 64 - trying to verify two annotated non-signed tags should fail
ok 6 - showing a range walks (Y shape, ^ first)
ok 65 - creating a signed tag with -m message should succeed
ok 7 - showing a range walks (Y shape, ^ last)
ok 3 - some commands use a pager
ok 8 - showing with -N walks
ok 66 - sign with a given key id
ok 9 - showing annotated tag
ok 67 - sign with an unknown id (1)
ok 68 - sign with an unknown id (2)
ok 10 - showing annotated tag plus commit
ok 11 - showing range
ok 69 - -u implies signed tag
ok 12 - -s suppresses diff
ok 13 - --quiet suppresses diff
# passed all 13 test(s)
1..13
*** t7008-grep-binary.sh ***
ok 70 - creating a signed tag with -F messagefile should succeed
ok 71 - creating a signed tag with -F - should succeed
not ok 4 - pager runs from subdir # TODO known breakage
ok 1 - setup
ok 72 - -s implies annotated tag
ok 2 - git grep ina a
ok 3 - git grep -ah ina a
ok 73 - trying to create a signed tag with non-existing -F file should fail
ok 4 - git grep -I ina a
ok 5 - git grep -c ina a
ok 6 - git grep -l ina a
ok 74 - verifying a signed tag should succeed
ok 7 - git grep -L bar a
ok 8 - git grep -q ina a
ok 9 - git grep -F ile a
ok 10 - git grep -Fi iLE a
ok 11 - git grep ile a
ok 75 - verifying two signed tags in one command should succeed
not ok 12 - git grep .fi a # TODO known breakage
ok 13 - git grep -F y<NUL>f a
ok 14 - git grep -F y<NUL>x a
ok 15 - git grep -Fi Y<NUL>f a
ok 16 - git grep -Fi Y<NUL>x a
ok 17 - git grep y<NUL>f a
ok 18 - git grep y<NUL>x a
ok 9 - rewrite, renaming a specific file
ok 5 - LESS and LV envvars are set for pagination
ok 10 - test that the file was renamed
ok 19 - grep respects binary diff attribute
ok 20 - grep --cached respects binary diff attribute
ok 76 - verifying many signed and non-signed tags should fail
ok 21 - grep --cached respects binary diff attribute (2)
ok 77 - verifying a forged tag should fail
ok 22 - grep revision respects binary diff attribute
ok 78 - creating a signed tag with an empty -m message should succeed
ok 23 - grep respects not-binary diff attribute
ok 24 - setup textconv filters
ok 25 - grep does not honor textconv
ok 26 - grep --textconv honors textconv
ok 27 - grep --no-textconv does not honor textconv
ok 79 - creating a signed tag with an empty -F messagefile should succeed
ok 28 - grep --textconv blob honors textconv
# still have 1 known breakage(s)
# passed all remaining 27 test(s)
1..28
*** t7009-filter-branch-null-sha1.sh ***
ok 6 - some commands do not use a pager
ok 7 - no pager when stdout is a pipe
ok 8 - no pager when stdout is a regular file
ok 80 - extra blanks in the message for a signed tag should be removed
ok 81 - creating a signed tag with a blank -m message should succeed
ok 1 - setup: base commits
ok 2 - setup: a commit with a bogus null sha1 in the tree
ok 82 - creating a signed tag with blank -F file with spaces should succeed
ok 3 - setup: bring HEAD and index in sync
ok 83 - creating a signed tag with spaces and no newline should succeed
ok 9 - git --paginate rev-list uses a pager
ok 10 - no pager even with --paginate when stdout is a pipe
ok 84 - creating a signed tag with a -F file with #comments should succeed
ok 85 - creating a signed tag with #commented -m message should succeed
ok 4 - filter commands are still checked
ok 86 - creating a signed tag with #commented -F messagefile should succeed
ok 11 - no pager with --no-pager
ok 87 - creating a signed tag with a #comment and no newline should succeed
ok 11 - rewrite, renaming a specific directory
ok 12 - test that the directory was renamed
ok 88 - listing the one-line message of a signed tag should succeed
ok 89 - listing the zero-lines message of a signed tag should succeed
ok 5 - removing the broken entry works
# passed all 5 test(s)
1..5
*** t7010-setup.sh ***
ok 1 - setup
ok 13 - rewrite one branch, keeping a side branch
ok 2 - git add (absolute)
ok 14 - common ancestor is still common (unchanged)
ok 3 - git add (funny relative)
ok 12 - configuration can disable pager
ok 90 - listing many message lines of a signed tag should succeed
ok 4 - git rm (absolute)
ok 5 - git rm (funny relative)
ok 6 - git ls-files (absolute)
ok 91 - creating a signed tag pointing to a tree should succeed
ok 7 - git ls-files (relative #1)
ok 8 - git ls-files (relative #2)
ok 92 - creating a signed tag pointing to a blob should succeed
ok 9 - git ls-files (relative #3)
ok 93 - creating a signed tag pointing to another tag should succeed
ok 10 - commit using absolute path names
ok 94 - creating a signed tag with rfc1991
ok 11 - log using absolute path names
ok 13 - git config uses a pager if configured to
ok 12 - blame using absolute path names
ok 95 - reediting a signed tag body omits signature
ok 13 - setup deeper work tree
ok 14 - add a directory outside the work tree
ok 96 - verifying rfc1991 signature
ok 15 - add a file outside the work tree, nasty case 1
ok 16 - add a file outside the work tree, nasty case 2
# passed all 16 test(s)
1..16
ok 97 - list tag with rfc1991 signature
*** t7011-skip-worktree-reading.sh ***
ok 98 - verifying rfc1991 signature without --rfc1991
ok 15 - filter subdirectory only
ok 99 - list tag with rfc1991 signature without --rfc1991
ok 16 - subdirectory filter result looks okay
ok 100 - reediting a signed tag body omits signature
ok 101 - git tag -s fails if gpg is misconfigured
ok 1 - setup
ok 102 - verify signed tag fails when public key is not present
ok 103 - git tag -a fails if tag annotation is empty
ok 2 - update-index
ok 17 - more setup
ok 104 - message in editor has initial comment
ok 105 - message in editor has initial comment: first line
ok 106 - message in editor has initial comment: remainder
ok 3 - update-index
ok 107 - overwriting an annoted tag should use its previous body
ok 108 - filename for the message is relative to cwd
ok 4 - update-index --remove
ok 109 - filename for the message is relative to cwd
ok 14 - configuration can enable pager (from subdir)
ok 15 - tests can detect color
ok 5 - update-index --remove
ok 110 - creating second commit and tag
ok 6 - ls-files --deleted
ok 111 - creating third commit without tag
ok 16 - no color when stdout is a regular file
ok 7 - ls-files --deleted
ok 112 - checking that first commit is in all tags (hash)
ok 113 - checking that first commit is in all tags (tag)
ok 8 - ls-files --modified
ok 114 - checking that first commit is in all tags (relative)
ok 115 - checking that second commit only has one tag
ok 9 - ls-files --modified
ok 116 - checking that third commit has no tags
ok 10 - grep with skip-worktree file
ok 117 - creating simple branch
ok 11 - diff-index does not examine skip-worktree absent entries
ok 118 - checking that branch head only has one tag
ok 12 - diff-index does not examine skip-worktree dirty entries
ok 119 - merging original branch into this branch
ok 13 - diff-files does not examine skip-worktree absent entries
ok 120 - checking that original branch head has one tag now
ok 121 - checking that initial commit is in all tags
ok 14 - diff-files does not examine skip-worktree dirty entries
ok 15 - git-rm succeeds on skip-worktree absent entries
ok 122 - mixing incompatibles modes and options is forbidden
ok 123 - --points-at cannot be used in non-list mode
ok 17 - color when writing to a pager
ok 124 - --points-at finds lightweight tags
ok 16 - commit on skip-worktree absent entries
ok 125 - --points-at finds annotated tags of commits
ok 17 - commit on skip-worktree dirty entries
ok 126 - --points-at finds annotated tags of tags
# passed all 17 test(s)
1..17
*** t7012-skip-worktree-writing.sh ***
ok 127 - multiple --points-at are OR-ed together
ok 128 - lexical sort
ok 129 - version sort
ok 130 - reverse version sort
ok 131 - reverse lexical sort
ok 132 - configured lexical sort
ok 1 - setup
ok 133 - option override configured sort
ok 134 - invalid sort parameter on command line
ok 135 - invalid sort parameter in configuratoin
ok 2 - read-tree updates worktree, absent case
ok 3 - read-tree updates worktree, dirty case
ok 18 - colors are suppressed by color.pager
ok 4 - read-tree removes worktree, absent case
ok 19 - color when writing to a file intended for a pager
ok 5 - read-tree removes worktree, dirty case
ok 6 - index setup
ok 7 - git-add ignores worktree content
ok 8 - git-add ignores worktree content
ok 9 - git-rm fails if worktree is dirty
ok 10 - git-clean, absent case
ok 20 - colors are sent to pager for external commands
ok 11 - git-clean, dirty case
# passed all 11 test(s)
1..11
ok 21 - setup: some aliases
ok 18 - use index-filter to move into a subdirectory
*** t7060-wtstatus.sh ***
ok 19 - stops when msg filter fails
ok 1 - setup
ok 2 - A/A conflict
ok 3 - Report path with conflict
ok 4 - Report new path with conflict
ok 22 - git log - default pager is used by default
ok 5 - M/D conflict does not segfault
ok 6 - rename & unmerged setup
ok 7 - rename & unmerged status
ok 23 - git log - PAGER overrides default pager
ok 8 - git diff-index --cached shows 2 added + 1 unmerged
ok 9 - git diff-index --cached -M shows 2 added + 1 unmerged
ok 10 - git diff-index --cached -C shows 2 copies + 1 unmerged
ok 24 - git log - repository-local core.pager setting overrides PAGER
ok 11 - status when conflicts with add and rm advice (deleted by them)
ok 12 - prepare for conflicts
ok 13 - status when conflicts with add and rm advice (both deleted)
ok 25 - git log - core.pager overrides PAGER from subdirectory
ok 14 - status when conflicts with only rm advice (both deleted)
# passed all 14 test(s)
1..14
ok 20 - author information is preserved
*** t7061-wtstatus-ignore.sh ***
ok 1 - status untracked directory with --ignored
ok 2 - status untracked directory with --ignored -u
ok 3 - status prefixed untracked directory with --ignored
ok 4 - status prefixed untracked sub-directory with --ignored -u
ok 5 - status ignored directory with --ignore
ok 6 - status ignored directory with --ignore -u
ok 7 - status empty untracked directory with --ignore
ok 26 - git log - GIT_PAGER overrides core.pager
ok 8 - status empty untracked directory with --ignore -u
ok 9 - status untracked directory with ignored files with --ignore
ok 10 - status untracked directory with ignored files with --ignore -u
ok 11 - status ignored tracked directory with --ignore
ok 12 - status ignored tracked directory with --ignore -u
ok 13 - status ignored tracked directory and ignored file with --ignore
ok 14 - status ignored tracked directory and ignored file with --ignore -u
ok 15 - status ignored tracked directory and uncommitted file with --ignore
ok 16 - status ignored tracked directory and uncommitted file with --ignore -u
ok 17 - status ignored tracked directory with uncommitted file in untracked subdir with --ignore
ok 18 - status ignored tracked directory with uncommitted file in untracked subdir with --ignore -u
ok 19 - status ignored tracked directory with uncommitted file in tracked subdir with --ignore
ok 27 - git -p log - default pager is used by default
ok 20 - status ignored tracked directory with uncommitted file in tracked subdir with --ignore -u
# passed all 20 test(s)
1..20
*** t7062-wtstatus-ignorecase.sh ***
ok 1 - status with hash collisions
# passed all 1 test(s)
1..1
*** t7101-reset-empty-subdirs.sh ***
ok 1 - creating initial files
ok 28 - git -p log - PAGER overrides default pager
ok 136 - --contains works in a deep repo
# passed all 136 test(s)
1..136
ok 2 - creating second files
*** t7102-reset.sh ***
ok 3 - resetting tree HEAD^
ok 4 - checking initial files exist after rewind
ok 5 - checking lack of path1/path2/COPYING
ok 6 - checking lack of path1/COPYING
ok 7 - checking lack of COPYING
ok 8 - checking checking lack of path1/COPYING-TOO
ok 9 - checking lack of path1/path2
ok 10 - checking lack of path1
# passed all 10 test(s)
1..10
*** t7103-reset-bare.sh ***
ok 1 - setup non-bare
ok 2 - "hard" reset requires a worktree
ok 3 - "merge" reset requires a worktree
ok 4 - "keep" reset requires a worktree
ok 29 - git -p log - repository-local core.pager setting overrides PAGER
ok 5 - "mixed" reset is ok
ok 1 - creating initial files and commits
ok 6 - "soft" reset is ok
ok 2 - reset --hard message
ok 7 - hard reset works with GIT_WORK_TREE
ok 3 - reset --hard message (ISO8859-1 logoutputencoding)
ok 8 - setup bare
ok 9 - "hard" reset is not allowed in bare
ok 10 - "merge" reset is not allowed in bare
ok 21 - remove a certain author's commits
ok 11 - "keep" reset is not allowed in bare
ok 12 - "mixed" reset is not allowed in bare
ok 13 - "soft" reset is allowed in bare
ok 4 - giving a non existing revision should fail
# passed all 13 test(s)
1..13
*** t7104-reset-hard.sh ***
ok 5 - reset --soft with unmerged index should fail
ok 6 - giving paths with options different than --mixed should fail
ok 22 - barf on invalid name
ok 1 - setup
ok 30 - git -p log - core.pager overrides PAGER from subdirectory
ok 2 - reset --hard should restore unmerged ones
ok 7 - giving unrecognized options should fail
ok 3 - reset --hard did not corrupt index or cached-tree
# passed all 3 test(s)
1..3
*** t7105-reset-patch.sh ***
ok 8 - trying to do reset --soft with pending merge should fail
ok 1 - setup
ok 23 - "map" works in commit filter
ok 31 - git -p log - GIT_PAGER overrides core.pager
ok 9 - trying to do reset --soft with pending checkout merge should fail
ok 32 - git aliasedlog - default pager is used by default
ok 10 - resetting to HEAD with no changes should succeed and do nothing
ok 2 - saying "n" does nothing
ok 24 - Name needing quotes
ok 11 - --soft reset only should show changes in diff --cached
ok 33 - git aliasedlog - PAGER overrides default pager
ok 12 - changing files and redo the last commit should succeed
ok 13 - --hard reset should change the files and undo commits permanently
ok 14 - redoing changes adding them without commit them should succeed
ok 15 - --mixed reset to HEAD should unadd the files
ok 16 - redoing the last two commits should succeed
ok 34 - git aliasedlog - repository-local core.pager setting overrides PAGER
ok 3 - git reset -p
ok 25 - Subdirectory filter with disappearing trees
ok 17 - --hard reset to HEAD should clear a failed merge
ok 35 - git aliasedlog - core.pager overrides PAGER from subdirectory
ok 26 - Tag name filtering retains tag message
ok 4 - git reset -p HEAD^
ok 18 - --hard reset to ORIG_HEAD should clear a fast-forward merge
ok 36 - git aliasedlog - GIT_PAGER overrides core.pager
ok 19 - test --mixed <paths>
ok 20 - test resetting the index at give paths
ok 21 - resetting an unmodified path is a no-op
ok 22 - --mixed refreshes the index
ok 23 - resetting specific path that is unmerged
ok 27 - Tag name filtering strips gpg signature
ok 37 - git -p aliasedlog - default pager is used by default
ok 24 - disambiguation (1)
ok 25 - disambiguation (2)
ok 5 - git reset -p dir
ok 26 - disambiguation (3)
ok 27 - disambiguation (4)
ok 28 - reset with paths accepts tree
ok 29 - reset -N keeps removed files as intent-to-add
ok 38 - git -p aliasedlog - PAGER overrides default pager
ok 30 - reset --mixed sets up work tree
# passed all 30 test(s)
1..30
*** t7106-reset-unborn-branch.sh ***
ok 1 - setup
ok 28 - Tag name filtering allows slashes in tag names
ok 2 - reset
ok 3 - reset HEAD
ok 6 - git reset -p -- foo (inside dir)
ok 4 - reset $file
ok 39 - git -p aliasedlog - repository-local core.pager setting overrides PAGER
not ok 40 - git -p aliasedlog - core.pager overrides PAGER from subdirectory # TODO known breakage
ok 7 - git reset -p HEAD^ -- dir
ok 8 - none of this moved HEAD
ok 5 - reset -p
ok 29 - Prune empty commits
# passed all 8 test(s)
1..8
ok 6 - reset --soft is a no-op
*** t7110-reset-merge.sh ***
ok 7 - reset --hard
# passed all 7 test(s)
1..7
*** t7111-reset-table.sh ***
ok 1 - setup
ok 41 - git -p aliasedlog - GIT_PAGER overrides core.pager
ok 2 - reset --merge is ok with changes in file it does not touch
ok 1 - creating initial commits
ok 3 - reset --merge is ok when switching back
ok 2 - check: A B C D --soft A B D
ok 4 - reset --keep is ok with changes in file it does not touch
ok 5 - reset --keep is ok when switching back
ok 3 - check: A B C D --mixed A D D
ok 4 - check: A B C D --hard D D D
ok 6 - reset --merge discards changes added to index (1)
ok 5 - check: A B C D --merge XXXXX
ok 6 - check: A B C D --keep XXXXX
ok 7 - reset --merge is ok again when switching back (1)
ok 42 - git -p true - default pager is used by default
ok 8 - reset --keep fails with changes in index in files it touches
ok 7 - check: A B C C --soft A B C
ok 30 - prune empty collapsed merges
ok 9 - reset --merge discards changes added to index (2)
ok 8 - check: A B C C --mixed A C C
ok 10 - reset --merge is ok again when switching back (2)
ok 9 - check: A B C C --hard C C C
ok 11 - reset --keep keeps changes it does not touch
ok 10 - check: A B C C --merge XXXXX
ok 12 - reset --keep keeps changes when switching back
ok 11 - check: A B C C --keep A C C
ok 43 - git -p true - PAGER overrides default pager
ok 13 - reset --merge fails with changes in file it touches
ok 12 - check: B B C D --soft B B D
ok 14 - reset --keep fails with changes in file it touches
ok 13 - check: B B C D --mixed B D D
ok 14 - check: B B C D --hard D D D
ok 15 - check: B B C D --merge D D D
ok 15 - setup 3 different branches
ok 16 - check: B B C D --keep XXXXX
ok 16 - "reset --merge HEAD^" is ok with pending merge
ok 17 - check: B B C C --soft B B C
ok 44 - git -p true - repository-local core.pager setting overrides PAGER
ok 17 - "reset --keep HEAD^" fails with pending merge
ok 31 - --remap-to-ancestor with filename filters
ok 18 - check: B B C C --mixed B C C
ok 18 - "reset --merge HEAD" is ok with pending merge
ok 19 - check: B B C C --hard C C C
ok 19 - "reset --keep HEAD" fails with pending merge
ok 20 - check: B B C C --merge C C C
ok 20 - --merge is ok with added/deleted merge
ok 21 - check: B B C C --keep B C C
ok 21 - --keep fails with added/deleted merge
# passed all 21 test(s)
1..21
ok 22 - check: B C C D --soft B C D
*** t7112-reset-submodule.sh ***
not ok 45 - git -p true - core.pager overrides PAGER from subdirectory # TODO known breakage
ok 23 - check: B C C D --mixed B D D
ok 24 - check: B C C D --hard D D D
ok 25 - check: B C C D --merge XXXXX
ok 26 - check: B C C D --keep XXXXX
ok 27 - check: B C C C --soft B C C
ok 28 - check: B C C C --mixed B C C
ok 32 - automatic remapping to ancestor with filename filters
ok 29 - check: B C C C --hard C C C
ok 46 - git -p true - GIT_PAGER overrides core.pager
ok 30 - check: B C C C --merge B C C
ok 31 - check: B C C C --keep B C C
ok 32 - setting up branches to test with unmerged entries
ok 33 - check: X U B C --soft XXXXX
ok 47 - git -p request-pull - default pager is used by default
ok 34 - check: X U B C --mixed X C C
ok 35 - check: X U B C --hard C C C
ok 33 - setup submodule
ok 36 - check: X U B C --merge C C C
ok 37 - check: X U B C --keep XXXXX
ok 38 - check: X U B B --soft XXXXX
ok 48 - git -p request-pull - PAGER overrides default pager
ok 39 - check: X U B B --mixed X B B
ok 40 - check: X U B B --hard B B B
ok 41 - check: X U B B --merge B B B
ok 42 - check: X U B B --keep XXXXX
# passed all 42 test(s)
1..42
*** t7201-co.sh ***
ok 49 - git -p request-pull - repository-local core.pager setting overrides PAGER
ok 34 - rewrite submodule with another content
ok 1 - setup
ok 2 - checkout from non-existing branch
ok 3 - checkout with dirty tree without -m
ok 4 - checkout with unrelated dirty tree without -m
ok 5 - checkout -m with dirty tree
not ok 50 - git -p request-pull - core.pager overrides PAGER from subdirectory # TODO known breakage
ok 6 - checkout -m with dirty tree, renamed
ok 7 - checkout -m with merge conflict
ok 8 - format of merge conflict from checkout -m
ok 1 - git reset --keep: added submodule creates empty directory
ok 9 - checkout --merge --conflict=diff3 <branch>
ok 35 - replace submodule revision
# passed all 35 test(s)
1..35
*** t7300-clean.sh ***
ok 10 - switch to another branch while carrying a deletion
ok 51 - git -p request-pull - GIT_PAGER overrides core.pager
ok 1 - setup
ok 11 - checkout to detach HEAD (with advice declined)
ok 2 - git clean with skip-worktree .gitignore
ok 3 - git clean
ok 4 - git clean src/
ok 12 - checkout to detach HEAD
ok 5 - git clean src/ src/
ok 6 - git clean with prefix
ok 7 - git clean with relative prefix
ok 13 - checkout to detach HEAD with branchname^
ok 8 - git clean with absolute path
ok 9 - git clean with out of work tree relative path
ok 10 - git clean with out of work tree absolute path
ok 11 - git clean -d with prefix and path
ok 14 - checkout to detach HEAD with :/message
ok 12 - git clean symbolic link
ok 13 - git clean with wildcard
ok 14 - git clean -n
ok 15 - checkout to detach HEAD with HEAD^0
ok 15 - git clean -d
ok 16 - git clean -d src/ examples/
ok 52 - git -p - default pager is used by default
ok 17 - git clean -x
ok 18 - git clean -d -x
ok 16 - checkout with ambiguous tag/branch names
ok 19 - git clean -d -x with ignored tracked directory
ok 20 - git clean -X
ok 21 - git clean -d -X
ok 22 - git clean -d -X with ignored tracked directory
ok 23 - clean.requireForce defaults to true
ok 24 - clean.requireForce
ok 25 - clean.requireForce and -n
ok 17 - checkout with ambiguous tag/branch names
ok 26 - clean.requireForce and -f
ok 2 - git reset --keep: added submodule leaves existing empty directory alone
ok 27 - core.excludesfile
ok 28 - removal failure
ok 18 - switch branches while in subdirectory
ok 19 - checkout specific path while in subdirectory
ok 29 - nested git work tree
ok 53 - git -p - PAGER overrides default pager
ok 20 - checkout w/--track sets up tracking
ok 3 - git reset --keep: added submodule doesn't remove untracked unignored file with same name
ok 21 - checkout w/autosetupmerge=always sets up tracking
ok 30 - force removal of nested git work tree
ok 22 - checkout w/--track from non-branch HEAD fails
ok 31 - git clean -e
ok 32 - git clean -d with an unreadable empty directory
ok 33 - git clean -d respects pathspecs (dir is prefix of pathspec)
ok 34 - git clean -d respects pathspecs (pathspec is prefix of dir)
# passed all 34 test(s)
1..34
ok 23 - checkout w/--track from tag fails
*** t7301-clean-interactive.sh ***
not ok 54 - git -p - repository-local core.pager setting is not used # TODO known breakage
ok 24 - detach a symbolic link HEAD
ok 1 - setup
ok 2 - git clean -i (c: clean hotkey)
ok 3 - git clean -i (cl: clean prefix)
ok 4 - git clean -i (quit)
ok 5 - git clean -i (Ctrl+D)
ok 6 - git clean -id (filter all)
ok 7 - git clean -id (filter patterns)
ok 8 - git clean -id (filter patterns 2)
ok 9 - git clean -id (select - all)
ok 25 - checkout with --track fakes a sensible -b <name>
ok 10 - git clean -id (select - none)
ok 26 - checkout with --track, but without -b, fails with too short tracked name
ok 11 - git clean -id (select - number)
ok 12 - git clean -id (select - number 2)
ok 13 - git clean -id (select - number 3)
ok 27 - checkout an unmerged path should fail
ok 14 - git clean -id (select - filenames)
ok 55 - git -p - core.pager is not used from subdirectory
ok 15 - git clean -id (select - range)
ok 16 - git clean -id (select - range 2)
ok 17 - git clean -id (inverse select)
ok 28 - checkout with an unmerged path can be ignored
ok 18 - git clean -id (ask)
ok 19 - git clean -id (ask - Ctrl+D)
ok 20 - git clean -id with prefix and path (filter)
ok 4 - git reset --keep: replace tracked file with submodule creates empty directory
ok 21 - git clean -id with prefix and path (select by name)
ok 29 - checkout unmerged stage
ok 22 - git clean -id with prefix and path (ask)
# passed all 22 test(s)
1..22
*** t7400-submodule-basic.sh ***
ok 30 - checkout with --merge
ok 1 - setup - initial commit
ok 56 - git -p - GIT_PAGER overrides core.pager
ok 2 - configuration parsing
ok 31 - checkout with --merge, in diff3 -m style
ok 3 - setup - repository in init subdirectory
ok 4 - setup - commit with gitlink
ok 5 - setup - hide init subdirectory
ok 32 - checkout --conflict=merge, overriding config
ok 6 - setup - repository to add submodules to
ok 33 - checkout --conflict=diff3
not ok 57 - no pager for 'git -p nonsense' # TODO known breakage
ok 34 - failing checkout -b should not break working tree
ok 35 - switch out of non-branch
ok 5 - git reset --keep: replace directory with submodule
ok 7 - submodule add
ok 36 - custom merge driver with checkout -m
# passed all 36 test(s)
1..36
*** t7401-submodule-summary.sh ***
ok 58 - git shortlog - default pager is used by default
ok 8 - submodule add to .gitignored path fails
ok 9 - submodule add to .gitignored path with --force
ok 59 - git shortlog - PAGER overrides default pager
ok 1 - added submodule
ok 2 - added submodule (subdirectory)
ok 6 - git reset --keep: removed submodule leaves submodule directory and its contents in place
ok 60 - git shortlog - repository-local core.pager setting overrides PAGER
ok 3 - added submodule (subdirectory only)
ok 10 - submodule add --branch
ok 4 - added submodule (subdirectory with explicit path)
ok 61 - git shortlog - core.pager overrides PAGER from subdirectory
ok 5 - modified submodule(forward)
ok 11 - submodule add with ./ in path
ok 6 - modified submodule(forward), --files
ok 62 - git shortlog - GIT_PAGER overrides core.pager
ok 63 - setup: configure shortlog not to paginate
ok 7 - git reset --keep: removed submodule leaves submodule containing a .git directory alone
ok 7 - no ignore=all setting has any effect
ok 64 - no pager for 'git shortlog'
ok 8 - modified submodule(backward)
ok 12 - submodule add with // in path
ok 9 - modified submodule(backward and forward)
ok 65 - git shortlog - core.pager is not used from subdirectory
ok 10 - --summary-limit
ok 8 - git reset --keep: replace submodule with a directory must fail
ok 66 - git -p shortlog - default pager is used by default
ok 11 - typechanged submodule(submodule->blob), --cached
ok 13 - submodule add with /.. in path
ok 12 - typechanged submodule(submodule->blob), --files
ok 67 - git -p shortlog - core.pager overrides PAGER from subdirectory
ok 13 - typechanged submodule(submodule->blob)
ok 68 - git -p apply </dev/null - core.pager overrides PAGER from subdirectory
ok 14 - submodule add with ./, /.. and // in path
ok 14 - nonexistent commit
ok 9 - git reset --keep: replace submodule containing a .git directory with a directory must fail
ok 15 - typechanged submodule(blob->submodule)
ok 69 - command-specific pager
ok 16 - deleted submodule
ok 15 - submodule add in subdirectory
ok 70 - command-specific pager overrides core.pager
ok 17 - multiple submodules
ok 16 - submodule add in subdirectory with relative path should fail
ok 17 - setup - add an example entry to .gitmodules
not ok 10 - git reset --keep: replace submodule with a file must fail # TODO known breakage
ok 18 - status should fail for unmapped paths
ok 19 - setup - map path in .gitmodules
ok 18 - path filter
ok 20 - status should only print one line
ok 21 - setup - fetch commit name from submodule
ok 71 - command-specific pager overridden by environment
ok 72 - setup external command
ok 19 - given commit
ok 22 - status should initially be "missing"
ok 23 - init should register submodule url in .git/config
ok 20 - --for-status
ok 24 - init should fail with unknown submodule
ok 73 - command-specific pager works for external commands
ok 21 - fail when using --files together with --cached
ok 25 - update should fail with unknown submodule
ok 22 - should not fail in an empty repo
not ok 11 - git reset --keep: replace submodule containing a .git directory with a file must fail # TODO known breakage
# passed all 22 test(s)
1..22
ok 26 - status should fail with unknown submodule
*** t7402-submodule-rebase.sh ***
ok 27 - sync should fail with unknown submodule
ok 74 - sub-commands of externals use their own pager
ok 28 - update should fail when path is used by a file
ok 29 - update should fail when path is used by a nonempty directory
ok 1 - setup
ok 75 - external command pagers override sub-commands
# still have 6 known breakage(s)
# passed all remaining 69 test(s)
1..75
*** t7403-submodule-sync.sh ***
ok 30 - update should work when path is an empty dir
ok 12 - git reset --keep: modified submodule does not update submodule work tree
ok 31 - status should be "up-to-date" after update
ok 2 - rebase with a dirty submodule
ok 32 - status "up-to-date" from subdirectory
ok 33 - status "up-to-date" from subdirectory with path
ok 3 - interactive rebase with a dirty submodule
ok 34 - status should be "modified" after submodule commit
ok 35 - the --cached sha1 should be rev1
ok 36 - git diff should report the SHA1 of the new submodule commit
ok 4 - rebase with dirty file and submodule fails
ok 37 - update should checkout rev1
ok 13 - git reset --keep: modified submodule does not update submodule work tree to invalid commit
ok 38 - status should be "up-to-date" after update
ok 5 - stash with a dirty submodule
ok 39 - checkout superproject with subproject already present
ok 40 - apply submodule diff
ok 14 - git reset --keep: modified submodule does not update submodule work tree from invalid commit
ok 41 - update --init
ok 6 - rebasing submodule that should conflict
# passed all 6 test(s)
1..6
*** t7405-submodule-merge.sh ***
ok 42 - update --init from subdirectory
ok 1 - setup
ok 43 - do not add files from a submodule
ok 44 - gracefully add/reset submodule with a trailing slash
ok 15 - git reset --merge: added submodule creates empty directory
ok 45 - ls-files gracefully handles trailing slash
ok 46 - moving to a commit without submodule does not leave empty dir
ok 47 - submodule <invalid-subcommand> fails
ok 2 - setup for merge search
ok 3 - merge with one side as a fast-forward of the other
ok 4 - merging should conflict for non fast-forward
ok 5 - merging should fail for ambiguous common parent
ok 1 - setup
ok 2 - change submodule
ok 16 - git reset --merge: added submodule leaves existing empty directory alone
ok 48 - add submodules without specifying an explicit path
ok 6 - merging should fail for changes that are backwards
ok 49 - add should fail when path is used by a file
ok 7 - git submodule status should display the merge conflict properly with merge base
ok 50 - add should fail when path is used by an existing directory
ok 3 - change submodule url
ok 17 - git reset --merge: added submodule doesn't remove untracked unignored file with same name
ok 8 - git submodule status should display the merge conflict properly without merge-base
ok 9 - merging with a modify/modify conflict between merge bases
ok 51 - use superproject as upstream when path is relative and no url is set there
ok 52 - set up for relative path tests
ok 18 - git reset --merge: replace tracked file with submodule creates empty directory
ok 4 - "git submodule sync" should update submodule URLs
ok 53 - ../subrepo works with URL - ssh://hostname/repo
ok 10 - setup for recursive merge with submodule
ok 11 - recursive merge with submodule
# passed all 11 test(s)
1..11
ok 54 - ../subrepo works with port-qualified URL - ssh://hostname:22/repo
*** t7406-submodule-update.sh ***
ok 55 - ../subrepo path works with local path - //somewhere else/repo
ok 56 - ../subrepo works with file URL - file:///tmp/repo
ok 57 - ../subrepo works with helper URL- helper:://hostname/repo
ok 19 - git reset --merge: replace directory with submodule
ok 5 - "git submodule sync --recursive" should update all submodule URLs
ok 6 - reset submodule URLs
ok 58 - ../subrepo works with scp-style URL - user@host:repo
ok 59 - ../subrepo works with scp-style URL - user@host:path/to/repo
ok 60 - ../subrepo works with relative local path - foo
ok 61 - ../subrepo works with relative local path - foo/bar
ok 7 - "git submodule sync" should update submodule URLs - subdirectory
ok 20 - git reset --merge: removed submodule leaves submodule directory and its contents in place
ok 62 - ../subrepo works with relative local path - ./foo
ok 63 - ../subrepo works with relative local path - ./foo/bar
ok 64 - ../subrepo works with relative local path - ../foo
ok 65 - ../subrepo works with relative local path - ../foo/bar
ok 8 - "git submodule sync --recursive" should update all submodule URLs - subdirectory
ok 21 - git reset --merge: removed submodule leaves submodule containing a .git directory alone
ok 1 - setup a submodule tree
ok 66 - ../bar/a/b/c works with relative local path - ../foo/bar.git
ok 2 - submodule update detaching the HEAD
ok 9 - "git submodule sync" should update known submodule URLs
ok 3 - submodule update from subdirectory
ok 22 - git reset --merge: replace submodule with a directory must fail
ok 10 - "git submodule sync" should not vivify uninteresting submodule
ok 4 - submodule update does not fetch already present commits
ok 11 - "git submodule sync" handles origin URL of the form foo
ok 5 - submodule update should fail due to local changes
ok 12 - "git submodule sync" handles origin URL of the form foo/bar
ok 6 - submodule update should throw away changes with --force
ok 23 - git reset --merge: replace submodule containing a .git directory with a directory must fail
ok 7 - submodule update --force forcibly checks out submodules
ok 13 - "git submodule sync --recursive" propagates changes in origin
ok 67 - moving the superproject does not break submodules
ok 14 - "git submodule sync" handles origin URL of the form ./foo
ok 8 - submodule update --remote should fetch upstream changes
ok 68 - submodule add --name allows to replace a submodule with another at the same path
ok 15 - "git submodule sync" handles origin URL of the form ./foo/bar
not ok 24 - git reset --merge: replace submodule with a file must fail # TODO known breakage
ok 16 - "git submodule sync" handles origin URL of the form ../foo
ok 9 - local config should override .gitmodules branch
ok 69 - submodule add with an existing name fails unless forced
ok 17 - "git submodule sync" handles origin URL of the form ../foo/bar
ok 70 - set up a second submodule
ok 10 - submodule update --rebase staying on master
not ok 25 - git reset --merge: replace submodule containing a .git directory with a file must fail # TODO known breakage
ok 71 - submodule deinit should remove the whole submodule section from .git/config
ok 18 - "git submodule sync" handles origin URL of the form ../foo/bar with deeply nested submodule
# passed all 18 test(s)
1..18
ok 11 - submodule update --merge staying on master
*** t7407-submodule-foreach.sh ***
ok 12 - submodule update - rebase in .git/config
ok 72 - submodule deinit from subdirectory
ok 26 - git reset --merge: modified submodule does not update submodule work tree
ok 13 - submodule update - checkout in .git/config but --rebase given
ok 14 - submodule update - merge in .git/config
ok 73 - submodule deinit . deinits all initialized submodules
ok 15 - submodule update - checkout in .git/config but --merge given
ok 16 - submodule update - checkout in .git/config
ok 27 - git reset --merge: modified submodule does not update submodule work tree to invalid commit
ok 1 - setup a submodule tree
ok 17 - submodule update - command in .git/config
ok 74 - submodule deinit deinits a submodule when its work tree is missing or empty
ok 18 - submodule update - command in .git/config catches failure
ok 28 - git reset --merge: modified submodule does not update submodule work tree from invalid commit
ok 19 - submodule init does not copy command into .git/config
ok 20 - submodule init picks up rebase
ok 21 - submodule init picks up merge
ok 2 - test basic "submodule foreach" usage
ok 3 - test "submodule foreach" from subdirectory
ok 29 - git reset --hard: added submodule creates empty directory
ok 75 - submodule deinit fails when the submodule contains modifications unless forced
ok 22 - submodule update --merge - ignores --merge for new submodules
ok 23 - submodule update --rebase - ignores --rebase for new submodules
ok 30 - git reset --hard: added submodule leaves existing empty directory alone
ok 76 - submodule deinit fails when the submodule contains untracked files unless forced
ok 31 - git reset --hard: added submodule does remove untracked unignored file with same name when forced
ok 24 - submodule update ignores update=merge config for new submodules
ok 4 - setup nested submodules
ok 77 - submodule deinit fails when the submodule HEAD does not match unless forced
ok 25 - submodule update ignores update=rebase config for new submodules
ok 32 - git reset --hard: replace tracked file with submodule creates empty directory
ok 26 - submodule init picks up update=none
ok 33 - git reset --hard: replace directory with submodule
ok 27 - submodule update - update=none in .git/config
ok 78 - submodule deinit is silent when used on an uninitialized submodule
ok 34 - git reset --hard: removed submodule leaves submodule directory and its contents in place
ok 28 - submodule update - update=none in .git/config but --checkout given
ok 5 - use "submodule foreach" to checkout 2nd level submodule
ok 79 - submodule deinit fails when submodule has a .git directory even when forced
ok 35 - git reset --hard: removed submodule leaves submodule containing a .git directory alone
ok 29 - submodule update --init skips submodule with update=none
ok 80 - submodule with UTF-8 name
not ok 36 - git reset --hard: replace submodule with a directory must fail # TODO known breakage
ok 81 - submodule add clone shallow submodule
# passed all 81 test(s)
1..81
*** t7408-submodule-reference.sh ***
ok 1 - preparing first repository
not ok 37 - git reset --hard: replace submodule containing a .git directory with a directory must fail # TODO known breakage
ok 2 - preparing second repository
ok 3 - preparing superproject
ok 6 - use "foreach --recursive" to checkout all submodules
ok 4 - submodule add --reference
ok 30 - submodule update continues after checkout error
ok 5 - after add: existence of info/alternates
ok 6 - that reference gets used with add
ok 7 - cloning superproject
not ok 38 - git reset --hard: replace submodule with a file must fail # TODO known breakage
ok 7 - test messages from "foreach --recursive"
ok 8 - update with reference
ok 9 - after update: existence of info/alternates
ok 10 - that reference gets used with update
# passed all 10 test(s)
1..10
*** t7409-submodule-detached-worktree.sh ***
ok 8 - test "foreach --quiet --recursive"
not ok 39 - git reset --hard: replace submodule containing a .git directory with a file must fail # TODO known breakage
ok 1 - submodule on detached working tree
ok 40 - git reset --hard: modified submodule does not update submodule work tree
ok 31 - submodule update continues after recursive checkout error
ok 2 - submodule on detached working pointed by core.worktree
# passed all 2 test(s)
1..2
*** t7500-commit.sh ***
ok 1 - a basic commit in an empty tree should succeed
ok 2 - nonexistent template file should return error
ok 3 - nonexistent template file in config should return error
ok 41 - git reset --hard: modified submodule does not update submodule work tree to invalid commit
ok 4 - unedited template should not commit
ok 5 - unedited template with comments should not commit
ok 6 - a Signed-off-by line by itself should not commit
ok 7 - adding comments to a template should not commit
ok 8 - adding real content to a template should commit
ok 9 - use "update --recursive" to checkout all submodules
ok 9 - -t option should be short for --template
ok 10 - config-specified template should commit
ok 11 - explicit commit message should override template
ok 12 - commit message from file should override template
ok 13 - commit message from template with whitespace issue
ok 14 - using alternate GIT_INDEX_FILE (1)
ok 15 - using alternate GIT_INDEX_FILE (2)
ok 16 - --signoff
ok 17 - commit message from file (1)
ok 18 - commit message from file (2)
ok 19 - commit message from stdin
ok 20 - commit -F overrides -t
ok 32 - submodule update exit immediately in case of merge conflict
ok 21 - Commit without message is allowed with --allow-empty-message
ok 42 - git reset --hard: modified submodule does not update submodule work tree from invalid commit
# still have 8 known breakage(s)
# passed all remaining 34 test(s)
1..42
ok 22 - Commit without message is no-no without --allow-empty-message
ok 23 - Commit a message with --allow-empty-message
*** t7501-commit.sh ***
ok 24 - commit -C empty respects --allow-empty-message
ok 1 - initial status
ok 2 - fail initial amend
ok 3 - setup: initial commit
ok 25 - commit --fixup provides correct one-line commit message
ok 4 - -m and -F do not mix
ok 10 - test "status --recursive"
ok 5 - -m and -C do not mix
ok 6 - paths and -a do not mix
ok 26 - commit --squash works with -F
ok 27 - commit --squash works with -m
ok 28 - commit --squash works with -C
ok 29 - commit --squash works with -c
ok 30 - commit --squash works with -C for same commit
ok 11 - ensure "status --cached --recursive" preserves the --cached flag
ok 7 - can use paths with --interactive
ok 8 - using invalid commit with -C
ok 9 - nothing to commit
ok 31 - commit --squash works with -c for same commit
ok 10 - --dry-run fails with nothing to commit
ok 11 - --short fails with nothing to commit
ok 33 - submodule update exit immediately after recursive rebase error
ok 12 - --porcelain fails with nothing to commit
ok 13 - --long fails with nothing to commit
ok 14 - setup: non-initial commit
ok 15 - --dry-run with stuff to commit returns ok
not ok 16 - --short with stuff to commit returns ok # TODO known breakage
ok 32 - commit --squash works with editor
not ok 17 - --porcelain with stuff to commit returns ok # TODO known breakage
ok 18 - --long with stuff to commit returns ok
ok 19 - commit message from non-existing file
ok 20 - empty commit message
ok 33 - invalid message options when using --fixup
# passed all 33 test(s)
1..33
ok 21 - template "emptyness" check does not kick in with -F
ok 22 - template "emptyness" check
*** t7502-commit.sh ***
ok 23 - setup: commit message from file
ok 24 - amend commit
ok 25 - amend --only ignores staged contents
ok 1 - output summary format
ok 26 - set up editor
ok 34 - add different submodules to the same path
ok 2 - output summary format: root-commit
ok 3 - output summary format for commit with an empty diff
ok 27 - amend without launching editor
ok 28 - --amend --edit
ok 29 - --amend --edit of empty message
ok 30 - -m --edit
ok 35 - submodule add places git-dir in superprojects git-dir
ok 31 - -m and -F do not mix
ok 4 - output summary format for merges
ok 32 - using message from other commit
ok 33 - editing message from other commit
ok 34 - message from stdin
ok 5 - the basics
ok 35 - overriding author from command line
ok 6 - partial
ok 7 - partial modification in a subdirectory
ok 8 - partial removal
ok 9 - sign off
ok 10 - multiple -m
ok 11 - verbose
ok 12 - verbose respects diff config
ok 13 - prepare file with comment line and trailing newlines
ok 14 - cleanup commit messages (verbatim option,-t)
ok 15 - cleanup commit messages (verbatim option,-F)
ok 16 - cleanup commit messages (verbatim option,-m)
ok 17 - cleanup commit messages (whitespace option,-F)
ok 36 - interactive add
ok 18 - cleanup commit messages (scissors option,-F,-e)
ok 19 - cleanup commit messages (strip option,-F)
ok 20 - cleanup commit messages (strip option,-F,-e)
ok 21 - cleanup commit messages (strip option,-F,-e): output
ok 22 - cleanup commit message (fail on invalid cleanup mode option)
ok 23 - cleanup commit message (fail on invalid cleanup mode configuration)
ok 24 - cleanup commit message (no config and no option uses default)
ok 25 - cleanup commit message (option overrides default)
ok 26 - cleanup commit message (config overrides default)
ok 36 - submodule update places git-dir in superprojects git-dir
ok 27 - cleanup commit message (option overrides config)
ok 28 - cleanup commit message (default, -m)
ok 29 - cleanup commit message (whitespace option, -m)
ok 30 - cleanup commit message (whitespace config, -m)
ok 31 - message shows author when it is not equal to committer
ok 32 - message shows date when it is explicitly set
ok 37 - commit --interactive doesn't change index if editor aborts
ok 33 # skip message shows committer when it is automatic (missing AUTOIDENT)
ok 34 - do not fire editor when committer is bogus
ok 38 - editor not invoked if -F is given
ok 35 - do not fire editor if -m <msg> was given
ok 36 - do not fire editor if -m "" was given
ok 39 - partial commit that involves removal (1)
ok 40 - partial commit that involves removal (2)
ok 37 - submodule add places git-dir in superprojects git-dir recursive
ok 41 - partial commit that involves removal (3)
ok 37 - do not fire editor in the presence of conflicts
ok 42 - amend commit to fix author
ok 38 - a SIGTERM should break locks
ok 43 - amend commit to fix date
ok 44 - commit mentions forced date in output
ok 45 - commit complains about completely bogus dates
ok 39 - Hand committing of a redundant merge removes dups
ok 46 - commit --date allows approxidate
ok 40 - A single-liner subject with a token plus colon is not a footer
ok 41 - commit -s places sob on third line after two empty lines
ok 47 - sign off (1)
ok 48 - sign off (2)
ok 42 - commit
ok 12 - use "git clone --recursive" to checkout all submodules
ok 49 - signoff gap
ok 43 - commit
ok 50 - signoff gap 2
ok 44 - commit --status
ok 51 - multiple -m
ok 45 - commit --no-status
ok 52 - amend commit to fix author
ok 46 - commit with commit.status = yes
ok 53 - git commit <file> with dirty index
ok 54 - same tree (single parent)
ok 47 - commit with commit.status = no
ok 55 - same tree (single parent) --allow-empty
ok 48 - commit --status with commit.status = yes
ok 49 - commit --no-status with commit.status = yes
ok 56 - same tree (merge and amend merge)
ok 50 - commit --status with commit.status = no
ok 57 - amend using the message from another commit
ok 51 - commit --no-status with commit.status = no
ok 52 - commit
ok 58 - amend using the message from a commit named with tag
ok 53 - commit
ok 54 - commit --status
ok 59 - amend can copy notes
ok 55 - commit --no-status
ok 60 - commit a file whose name is a dash
ok 56 - commit with commit.status = yes
ok 61 - --only works on to-be-born branch
# still have 2 known breakage(s)
# passed all remaining 59 test(s)
1..61
ok 57 - commit with commit.status = no
*** t7503-pre-commit-hook.sh ***
ok 58 - commit --status with commit.status = yes
ok 1 - with no hook
ok 59 - commit --no-status with commit.status = yes
ok 2 - --no-verify with no hook
ok 3 - with succeeding hook
ok 60 - commit --status with commit.status = no
ok 4 - --no-verify with succeeding hook
ok 5 - with failing hook
ok 6 - --no-verify with failing hook
ok 61 - commit --no-status with commit.status = no
ok 7 - with non-executable hook
ok 8 - --no-verify with non-executable hook
ok 9 - with hook requiring GIT_PREFIX
ok 62 - commit --status with custom comment character
ok 10 - with failing hook requiring GIT_PREFIX
ok 63 - switch core.commentchar
ok 64 - switch core.commentchar but out of options
ok 11 - check the author in hook
# passed all 64 test(s)
1..64
# passed all 11 test(s)
1..11
ok 38 - submodule update places git-dir in superprojects git-dir recursive
*** t7504-commit-msg-hook.sh ***
*** t7505-prepare-commit-msg-hook.sh ***
ok 1 - with no hook
ok 2 - with no hook (editor)
ok 1 - with no hook
ok 3 - --no-verify with no hook
ok 4 - --no-verify with no hook (editor)
ok 2 - with hook (-m)
ok 39 - submodule add properly re-creates deeper level submodules
ok 5 - with succeeding hook
ok 3 - with hook (-m editor)
ok 6 - with succeeding hook (editor)
ok 7 - --no-verify with succeeding hook
ok 4 - with hook (-t)
ok 8 - --no-verify with succeeding hook (editor)
ok 5 - with hook (-F)
ok 9 - with failing hook
ok 6 - with hook (-F editor)
ok 10 - with failing hook (editor)
ok 11 - --no-verify with failing hook
ok 7 - with hook (-C)
ok 12 - --no-verify with failing hook (editor)
ok 13 - with non-executable hook
ok 8 - with hook (editor)
ok 14 - with non-executable hook (editor)
ok 15 - --no-verify with non-executable hook
ok 9 - with hook (--amend)
ok 16 - --no-verify with non-executable hook (editor)
ok 17 - hook edits commit message
ok 10 - with hook (-c)
ok 18 - hook edits commit message (editor)
ok 19 - hook doesn't edit commit message
ok 20 - hook doesn't edit commit message (editor)
ok 11 - with hook (merge)
# passed all 20 test(s)
1..20
*** t7506-status-submodule.sh ***
ok 13 - test "update --recursive" with a flag with spaces
ok 12 - with hook and editor (merge)
ok 13 - with failing hook
ok 1 - setup
ok 2 - status clean
ok 14 - with failing hook (--no-verify)
ok 3 - commit --dry-run -a clean
ok 4 - status with modified file in submodule
ok 5 - status with modified file in submodule (porcelain)
ok 15 - with failing hook (merge)
# passed all 15 test(s)
1..15
ok 6 - status with added file in submodule
*** t7507-commit-verbose.sh ***
ok 40 - submodule update properly revives a moved submodule
ok 7 - status with added file in submodule (porcelain)
ok 8 - status with untracked file in submodule
ok 1 - setup
ok 9 - status -uno with untracked file in submodule
ok 2 - initial commit shows verbose diff
ok 10 - status with untracked file in submodule (porcelain)
ok 3 - second commit
ok 11 - status with added and untracked file in submodule
ok 4 - verbose diff is stripped out
ok 5 - verbose diff is stripped out (mnemonicprefix)
ok 12 - status with added and untracked file in submodule (porcelain)
ok 6 - diff in message is retained without -v
ok 7 - diff in message is retained with -v
ok 13 - status with modified file in modified submodule
ok 14 - status with modified file in modified submodule (porcelain)
ok 15 - status with added file in modified submodule
ok 16 - status with added file in modified submodule (porcelain)
ok 17 - status with untracked file in modified submodule
ok 18 - status with untracked file in modified submodule (porcelain)
ok 19 - status with added and untracked file in modified submodule
ok 8 - submodule log is stripped out too with -v
ok 20 - status with added and untracked file in modified submodule (porcelain)
ok 21 - setup .git file for sub
ok 9 - verbose diff is stripped out with set core.commentChar
# passed all 9 test(s)
1..9
*** t7508-status.sh ***
ok 22 - status with added file in modified submodule with .git file
ok 23 - rm submodule contents
ok 24 - status clean (empty submodule dir)
ok 25 - status -a clean (empty submodule dir)
ok 41 - submodule update can handle symbolic links in pwd
ok 1 - status -h in broken repository
ok 2 - commit -h in broken repository
ok 3 - setup
ok 4 - status (1)
ok 5 - status --column
ok 6 - status --column status.displayCommentPrefix=false
ok 7 - status with status.displayCommentPrefix=true
ok 8 - status with status.displayCommentPrefix=false
ok 9 - setup fake editor
ok 10 - commit ignores status.displayCommentPrefix=false in COMMIT_EDITMSG
ok 11 - status (advice.statusHints false)
ok 12 - status -s
ok 14 - use "update --recursive nested1" to checkout all submodules rooted in nested1
ok 13 - status with gitignore
ok 14 - status with gitignore (nothing untracked)
ok 15 - status -s -b
ok 16 - status -s -z -b
ok 17 - setup dir3
ok 18 - status -uno
ok 19 - status (status.showUntrackedFiles no)
ok 20 - status -uno (advice.statusHints false)
ok 21 - status -s -uno
ok 22 - status -s (status.showUntrackedFiles no)
ok 23 - status -unormal
ok 24 - status (status.showUntrackedFiles normal)
ok 25 - status -s -unormal
ok 26 - status -s (status.showUntrackedFiles normal)
ok 26 - status with merge conflict in .gitmodules
ok 27 - status -uall
ok 28 - status (status.showUntrackedFiles all)
ok 29 - teardown dir3
ok 15 - command passed to foreach retains notion of stdin
ok 30 - status -s -uall
ok 27 - diff with merge conflict in .gitmodules
ok 31 - status -s (status.showUntrackedFiles all)
ok 28 - diff --submodule with merge conflict in .gitmodules
# passed all 28 test(s)
1..28
ok 32 - status with relative paths
ok 33 - status -s with relative paths
ok 34 - status --porcelain ignores relative paths setting
ok 35 - setup unique colors
*** t7509-commit.sh ***
ok 36 - status with color.ui
ok 37 - status with color.status
ok 38 - status -s with color.ui
ok 39 - status -s with color.status
ok 40 - status -s -b with color.status
ok 41 - status --porcelain ignores color.ui
ok 1 - -C option copies authorship and message
ok 42 - status --porcelain ignores color.status
ok 2 - -C option copies only the message with --reset-author
ok 43 - status --porcelain respects -b
ok 3 - -c option copies authorship and message
ok 44 - status without relative paths
ok 45 - status -s without relative paths
ok 4 - -c option copies only the message with --reset-author
ok 46 - dry-run of partial commit excluding new file in index
ok 42 - submodule update clone shallow submodule
ok 47 - status refreshes the index
ok 5 - --amend option copies authorship
ok 48 - setup status submodule summary
ok 49 - status submodule summary is disabled by default
ok 6 - --amend option with empty author
ok 50 - status --untracked-files=all does not show submodule
ok 51 - status -s submodule summary is disabled by default
ok 52 - status -s --untracked-files=all does not show submodule
ok 7 - --amend option with missing author
ok 8 - --reset-author makes the commit ours even with --amend option
ok 43 - submodule update --recursive drops module name before recursing
ok 9 - --reset-author and --author are mutually exclusive
# passed all 43 test(s)
1..43
ok 10 - --reset-author should be rejected without -c/-C/--amend
ok 16 - command passed to foreach --recursive retains notion of stdin
ok 11 - commit respects CHERRY_PICK_HEAD and MERGE_MSG
ok 12 - --reset-author with CHERRY_PICK_HEAD
# passed all 12 test(s)
1..12
ok 53 - status submodule summary
*** t7510-signed-commit.sh ***
*** t7511-status-index.sh ***
ok 17 - multi-argument command passed to foreach is not shell-evaluated twice
# passed all 17 test(s)
1..17
ok 54 - status submodule summary with status.displayCommentPrefix=false
ok 1 - status, filename length 1
ok 2 - status, filename length 2
ok 3 - status, filename length 3
ok 4 - status, filename length 4
ok 5 - status, filename length 5
ok 6 - status, filename length 6
ok 7 - status, filename length 7
ok 55 - commit with submodule summary ignores status.displayCommentPrefix
ok 8 - status, filename length 8
ok 56 - status -s submodule summary
ok 9 - status, filename length 9
ok 10 - status, filename length 10
ok 11 - status, filename length 11
ok 12 - status, filename length 12
ok 13 - status, filename length 13
ok 14 - status, filename length 14
ok 15 - status, filename length 15
ok 16 - status, filename length 16
*** t7512-status-help.sh ***
ok 17 - status, filename length 17
ok 18 - status, filename length 18
ok 57 - status submodule summary (clean submodule): commit
ok 19 - status, filename length 19
ok 58 - status -s submodule summary (clean submodule)
ok 20 - status, filename length 20
ok 21 - status, filename length 21
ok 59 - status -z implies porcelain
ok 22 - status, filename length 22
ok 1 - prepare for conflicts
ok 23 - status, filename length 23
ok 2 - status when conflicts unresolved
ok 24 - status, filename length 24
# passed all 24 test(s)
1..24
*** t7514-commit-patch.sh ***
ok 3 - status when conflicts resolved before commit
ok 1 - setup (initial)
ok 4 - prepare for rebase conflicts
ok 60 - commit --dry-run submodule summary (--amend)
ok 61 - status succeeds in a read-only repository
ok 1 - create signed commits
ok 62 - --ignore-submodules=untracked suppresses submodules with untracked content
ok 2 - edit hunk "commit -p -m message"
ok 5 - status when rebase in progress before resolving conflicts
ok 2 - verify and show signatures
ok 3 - show signed commit with signature
ok 3 - edit hunk "commit --dry-run -p -m message"
# passed all 3 test(s)
1..3
ok 4 - detect fudged signature
*** t7515-status-symlinks.sh ***
ok 63 - .gitmodules ignore=untracked suppresses submodules with untracked content
ok 5 - detect fudged signature with NUL
ok 1 - setup
ok 2 - symlink to a directory
ok 3 - symlink replacing a directory
# passed all 3 test(s)
1..3
ok 6 - amending already signed commit
*** t7600-merge.sh ***
ok 7 - show good signature with custom format
ok 6 - status when rebase in progress before rebase --continue
ok 8 - show bad signature with custom format
ok 9 - show unknown signature with custom format
ok 10 - show lack of signature with custom format
# passed all 10 test(s)
1..10
*** t7601-merge-pull-config.sh ***
ok 64 - .git/config ignore=untracked suppresses submodules with untracked content
ok 7 - prepare for rebase_i_conflicts
ok 1 - setup
ok 1 - setup
ok 2 - test option parsing
ok 2 - merge c1 with c2
ok 3 - merge -h with invalid index
ok 4 - reject non-strategy with a git-merge-foo name
ok 65 - --ignore-submodules=dirty suppresses submodules with untracked content
ok 5 - merge c0 with c1
ok 6 - merge c0 with c1 with --ff-only
ok 3 - fast-forward pull succeeds with "true" in pull.ff
ok 7 - merge from unborn branch
ok 8 - status during rebase -i when conflicts unresolved
ok 8 - merge c1 with c2
ok 4 - fast-forward pull creates merge with "false" in pull.ff
ok 5 - pull prevents non-fast-forward with "only" in pull.ff
ok 66 - .gitmodules ignore=dirty suppresses submodules with untracked content
ok 6 - merge c1 with c2 (ours in pull.twohead)
ok 7 - merge c1 with c2 and c3 (recursive in pull.octopus)
ok 9 - merge c1 with c2 and c3
ok 10 - merges with --ff-only
ok 9 - status during rebase -i after resolving conflicts
ok 67 - .git/config ignore=dirty suppresses submodules with untracked content
ok 11 - merges with merge.ff=only
ok 8 - merge c1 with c2 and c3 (recursive and octopus in pull.octopus)
ok 12 - merge c0 with c1 (no-commit)
ok 13 - merge c1 with c2 (no-commit)
ok 9 - setup conflicted merge
ok 68 - --ignore-submodules=dirty suppresses submodules with modified content
ok 14 - merge c1 with c2 and c3 (no-commit)
ok 15 - merge c0 with c1 (squash)
ok 16 - merge c0 with c1 (squash, ff-only)
ok 10 - merge picks up the best result
ok 69 - .gitmodules ignore=dirty suppresses submodules with modified content
ok 17 - merge c1 with c2 (squash)
ok 18 - unsuccessful merge of c1 with c2 (squash, ff-only)
ok 10 - status when rebasing -i in edit mode
ok 70 - .git/config ignore=dirty suppresses submodules with modified content
ok 19 - merge c1 with c2 and c3 (squash)
ok 11 - merge picks up the best result (from config)
ok 20 - merge c1 with c2 (no-commit in config)
ok 12 - merge errors out on invalid strategy
ok 13 - merge errors out on invalid strategy
# passed all 13 test(s)
1..13
*** t7602-merge-octopus-many.sh ***
ok 21 - merge c1 with c2 (log in config)
ok 71 - --ignore-submodules=untracked doesn't suppress submodules with modified content
ok 22 - merge c1 with c2 (log in config gets overridden)
ok 23 - merge c1 with c2 (squash in config)
ok 24 - override config option -n with --summary
ok 11 - status when splitting a commit
ok 72 - .gitmodules ignore=untracked doesn't suppress submodules with modified content
ok 25 - override config option -n with --stat
ok 26 - override config option --stat
ok 73 - .git/config ignore=untracked doesn't suppress submodules with modified content
ok 27 - merge c1 with c2 (override --no-commit)
ok 28 - merge c1 with c2 (override --squash)
ok 29 - merge c0 with c1 (no-ff)
ok 30 - merge c0 with c1 (merge.ff=false)
ok 74 - --ignore-submodules=untracked doesn't suppress submodule summary
ok 12 - status after editing the last commit with --amend during a rebase -i
ok 31 - combine branch.master.mergeoptions with merge.ff
ok 32 - tolerate unknown values for merge.ff
ok 33 - combining --squash and --no-ff is refused
ok 34 - option --ff-only overwrites --no-ff
ok 13 - prepare for several edits
ok 35 - option --no-ff overrides merge.ff=only config
ok 36 - merge c0 with c1 (ff overrides no-ff)
ok 75 - .gitmodules ignore=untracked doesn't suppress submodule summary
ok 1 - setup
ok 37 - merge log message
ok 38 - merge c1 with c0, c2, c0, and c1
ok 76 - .git/config ignore=untracked doesn't suppress submodule summary
ok 39 - merge c1 with c0, c2, c0, and c1
ok 40 - merge c1 with c1 and c2
ok 41 - merge fast-forward in a dirty tree
ok 42 - in-index merge
ok 43 - refresh the index before merging
ok 14 - status: (continue first edit) second edit
ok 77 - --ignore-submodules=dirty doesn't suppress submodule summary
ok 44 - merge early part of c2
ok 45 - merge --no-ff --no-commit && commit
ok 46 - amending no-ff merge commit
ok 78 - .gitmodules ignore=dirty doesn't suppress submodule summary
ok 47 - merge --no-ff --edit
ok 48 - merge --ff-only tag
ok 49 - merge --no-edit tag should skip editor
# passed all 49 test(s)
1..49
*** t7603-merge-reduce-heads.sh ***
ok 79 - .git/config ignore=dirty doesn't suppress submodule summary
ok 15 - status: (continue first edit) second edit and split
ok 1 - setup
ok 2 - merge c1 with c2, c3, c4, ... c29
ok 80 - status (core.commentchar with submodule summary)
ok 81 - status (core.commentchar with two chars with submodule summary)
ok 82 - --ignore-submodules=all suppresses submodule summary
ok 3 - merge output uses pretty names
ok 4 - merge reduces irrelevant remote heads
ok 2 - merge c1 with c2, c3, c4, c5
ok 5 - merge fast-forward output uses pretty names
# passed all 5 test(s)
1..5
*** t7604-merge-custom-message.sh ***
ok 83 - .gitmodules ignore=all suppresses unstaged submodule summary
ok 1 - setup
ok 2 - merge c2 with a custom message
ok 3 - pull c2, c3, c4, c5 into c1
ok 3 - merge --log appends to custom message
# passed all 3 test(s)
1..3
ok 84 - .git/config ignore=all suppresses unstaged submodule summary
ok 16 - status: (continue first edit) second edit and amend
*** t7605-merge-resolve.sh ***
ok 1 - setup
ok 4 - setup
ok 2 - merge c1 to c2
ok 5 - merge E and I
ok 85 - setup of test environment
ok 6 - verify merge result
ok 86 - "status.short=true" same as "-s"
ok 3 - merge c2 to c3 (fails)
# passed all 3 test(s)
1..3
*** t7606-merge-custom.sh ***
ok 7 - add conflicts
ok 1 - set up custom strategy
ok 8 - merge E2 and I2, causing a conflict and resolve it
ok 2 - setup
ok 9 - verify merge result
ok 87 - "status.short=true" weaker than "--no-short"
ok 10 - fast-forward to redundant refs
ok 11 - verify merge result
ok 12 - merge up-to-date redundant refs
ok 13 - verify merge result
# passed all 13 test(s)
1..13
ok 17 - status: (amend first edit) second edit
*** t7607-merge-overwrite.sh ***
ok 3 - merge c2 with a custom strategy
ok 4 - trivial merge with custom strategy
# passed all 4 test(s)
1..4
*** t7608-merge-messages.sh ***
ok 88 - "status.short=false" same as "--no-short"
ok 1 - setup
ok 89 - "status.short=false" weaker than "-s"
ok 2 - will not overwrite untracked file
ok 90 - "status.branch=true" same as "-b"
ok 91 - "status.branch=true" different from "--no-branch"
ok 92 - "status.branch=true" weaker than "--no-branch"
ok 3 - will overwrite tracked file
ok 93 - "status.branch=true" weaker than "--porcelain"
ok 94 - "status.branch=false" same as "--no-branch"
ok 4 - will not overwrite new file
ok 1 - merge local branch
ok 95 - "status.branch=false" weaker than "-b"
ok 96 - Restore default test environment
ok 5 - will not overwrite staged changes
ok 6 - will not overwrite removed file
ok 7 - will not overwrite re-added file
ok 2 - merge octopus branches
ok 8 - will not overwrite removed file with staged changes
ok 97 - git commit will commit a staged but ignored submodule
not ok 9 - will not overwrite unstaged changes in renamed file # TODO known breakage
ok 10 - will not overwrite untracked subtree
ok 3 - merge tag
ok 11 - will not overwrite untracked file in leading path
ok 12 - will not overwrite untracked symlink in leading path
ok 18 - status: (amend first edit) second edit and split
ok 13 - will not be confused by symlink in leading path
ok 98 - git commit --dry-run will show a staged but ignored submodule
ok 4 - ambiguous tag
ok 14 - will not overwrite untracked file on unborn branch
ok 15 - will not overwrite untracked file on unborn branch .git/MERGE_HEAD sanity etc.
ok 16 - failed merge leaves unborn branch in the womb
ok 99 - git commit -m will commit a staged but ignored submodule
# passed all 99 test(s)
1..99
ok 17 - set up unborn branch and content
*** t7609-merge-co-error-msgs.sh ***
ok 18 - will not clobber WT/index when merging into unborn
# still have 1 known breakage(s)
# passed all remaining 17 test(s)
1..18
*** t7610-mergetool.sh ***
ok 5 - remote-tracking branch
# passed all 5 test(s)
1..5
*** t7611-merge-abort.sh ***
ok 1 - setup
ok 2 - untracked files overwritten by merge (fast and non-fast forward)
ok 3 - untracked files or local changes ovewritten by merge
ok 1 - setup
ok 4 - cannot switch branches because of local changes
ok 2 - fails without MERGE_HEAD (unstarted merge)
ok 5 - not uptodate file porcelain checkout error
ok 3 - fails without MERGE_HEAD (unstarted merge): .git/MERGE_HEAD sanity
ok 4 - fails without MERGE_HEAD (completed merge)
ok 5 - fails without MERGE_HEAD (completed merge): .git/MERGE_HEAD sanity
ok 6 - Forget previous merge
ok 7 - Abort after --no-commit
ok 6 - not_uptodate_dir porcelain checkout error
# passed all 6 test(s)
1..6
*** t7612-merge-verify-signatures.sh ***
ok 8 - Abort after conflicts
ok 9 - Clean merge with dirty index fails
ok 10 - Conflicting merge with dirty index fails
ok 11 - Reset index (but preserve worktree changes)
ok 12 - Abort clean merge with non-conflicting dirty worktree
ok 13 - Abort conflicting merge with non-conflicting dirty worktree
ok 14 - Reset worktree changes
ok 19 - status: (amend first edit) second edit and amend
ok 15 - Fail clean merge with conflicting dirty worktree
ok 16 - Fail conflicting merge with conflicting dirty worktree
ok 17 - Reset worktree changes
ok 1 - setup
ok 18 - Fail clean merge with matching dirty worktree
ok 1 - create signed commits
ok 2 - merge unsigned commit with verification
ok 19 - Abort clean merge with matching dirty index
ok 20 - Reset worktree changes
ok 3 - merge commit with bad signature with verification
ok 4 - merge commit with untrusted signature with verification
ok 21 - Fail conflicting merge with matching dirty worktree
ok 5 - merge signed commit with verification
ok 6 - merge commit with bad signature without verification
# passed all 6 test(s)
1..6
ok 22 - Abort conflicting merge with matching dirty index
ok 23 - Reset worktree changes
*** t7613-merge-submodule.sh ***
ok 24 - Abort merge with pre- and post-merge worktree changes
ok 25 - Reset worktree changes
ok 26 - Abort merge with pre- and post-merge index changes
# passed all 26 test(s)
1..26
*** t7700-repack.sh ***
ok 20 - status: (split first edit) second edit
ok 1 - objects in packs marked .keep are not repacked
ok 2 - writing bitmaps via command-line can duplicate .keep objects
ok 3 - writing bitmaps via config can duplicate .keep objects
ok 4 - loose objects in alternate ODB are not repacked
ok 5 - packed obs in alt ODB are repacked even when local repo is packless
ok 21 - status: (split first edit) second edit and split
ok 2 - custom mergetool
ok 6 - packed obs in alt ODB are repacked when local repo has packs
ok 1 - git merge: added submodule creates empty directory
ok 7 - packed obs in alternate ODB kept pack are repacked
ok 8 - packed unreachable obs in alternate ODB are not loosened
ok 9 - local packed unreachable obs that exist in alternate ODB are not loosened
ok 10 - objects made unreachable by grafts only are kept
# passed all 10 test(s)
1..10
*** t7701-repack-unpack-unreachable.sh ***
ok 22 - status: (split first edit) second edit and amend
ok 2 - git merge: added submodule leaves existing empty directory alone
ok 23 - prepare am_session
ok 3 - git merge: added submodule doesn't remove untracked unignored file with same name
ok 24 - status in an am session: file already exists
ok 1 - -A with -d option leaves unreachable objects unpacked
ok 2 - -A without -d option leaves unreachable objects packed
ok 3 - unpacked objects receive timestamp of pack file
ok 25 - status in an am session: file does not exist
ok 4 - git merge: replace tracked file with submodule creates empty directory
ok 4 - do not bother loosening old objects
# passed all 4 test(s)
1..4
*** t7702-repack-cyclic-alternate.sh ***
ok 3 - mergetool crlf
ok 26 - status in an am session: empty patch
ok 1 - setup
ok 2 - re-packing repository with itsself as alternate
# passed all 2 test(s)
1..2
*** t7800-difftool.sh ***
ok 5 - git merge: replace directory with submodule
ok 4 - mergetool in subdir
ok 1 - setup
ok 27 - status when bisecting
ok 6 - git merge: removed submodule leaves submodule directory and its contents in place
ok 28 - status when rebase conflicts with statushints disabled
ok 2 - custom commands
ok 29 - prepare for cherry-pick conflicts
ok 30 - status when cherry-picking before resolving conflicts
ok 31 - status when cherry-picking after resolving conflicts
ok 7 - git merge: removed submodule leaves submodule containing a .git directory alone
ok 32 - status showing detached at and from a tag
ok 5 - mergetool on file in parent dir
ok 33 - status while reverting commit (conflicts)
ok 34 - status while reverting commit (conflicts resolved)
ok 35 - status after reverting commit
# passed all 35 test(s)
1..35
ok 3 - custom tool commands override built-ins
*** t7810-grep.sh ***
ok 1 - setup
ok 2 - grep should not segfault with a bad input
ok 3 - grep -w HEAD
ok 4 - grep -w HEAD
ok 5 - grep -w HEAD
ok 6 - grep -w HEAD (w)
ok 7 - grep -w HEAD (x)
ok 8 - git merge: replace submodule with a directory must fail
ok 8 - grep -w HEAD (y-1)
ok 9 - grep -w HEAD (y-2)
ok 10 - grep -w HEAD (z)
ok 11 - grep HEAD (t-1)
ok 12 - grep HEAD (t-2)
ok 13 - grep HEAD (t-3)
ok 14 - grep -c HEAD (no /dev/null)
ok 15 - grep --max-depth -1 HEAD
ok 16 - grep --max-depth 0 HEAD
ok 17 - grep --max-depth 0 -- '*' HEAD
ok 18 - grep --max-depth 1 HEAD
ok 19 - grep --max-depth 0 -- t HEAD
ok 20 - grep --max-depth 0 -- . t HEAD
ok 21 - grep --max-depth 0 -- t . HEAD
ok 22 - grep HEAD with grep.extendedRegexp=false
ok 23 - grep HEAD with grep.extendedRegexp=true
ok 24 - grep HEAD with grep.patterntype=basic
ok 25 - grep HEAD with grep.patterntype=extended
ok 26 - grep HEAD with grep.patterntype=fixed
ok 27 - grep HEAD with grep.patterntype=perl
ok 28 - grep HEAD with grep.patternType=default and grep.extendedRegexp=true
ok 4 - difftool ignores bad --tool values
ok 29 - grep HEAD with grep.extendedRegexp=true and grep.patternType=default
ok 30 - grep HEAD with grep.patternType=extended and grep.extendedRegexp=false
ok 31 - grep HEAD with grep.patternType=basic and grep.extendedRegexp=true
ok 32 - grep HEAD with grep.extendedRegexp=false and grep.patternType=extended
ok 6 - mergetool skips autoresolved
ok 33 - grep HEAD with grep.extendedRegexp=true and grep.patternType=basic
ok 34 - grep --count HEAD
ok 35 - grep --count -h HEAD
ok 36 - grep -w in working tree
ok 37 - grep -w in working tree
ok 38 - grep -w in working tree
ok 39 - grep -w in working tree (w)
ok 40 - grep -w in working tree (x)
ok 41 - grep -w in working tree (y-1)
ok 42 - grep -w in working tree (y-2)
ok 43 - grep -w in working tree (z)
ok 44 - grep in working tree (t-1)
ok 45 - grep in working tree (t-2)
ok 46 - grep in working tree (t-3)
ok 47 - grep -c in working tree (no /dev/null)
ok 48 - grep --max-depth -1 in working tree
ok 49 - grep --max-depth 0 in working tree
ok 50 - grep --max-depth 0 -- '*' in working tree
ok 51 - grep --max-depth 1 in working tree
ok 52 - grep --max-depth 0 -- t in working tree
ok 53 - grep --max-depth 0 -- . t in working tree
ok 54 - grep --max-depth 0 -- t . in working tree
ok 55 - grep in working tree with grep.extendedRegexp=false
ok 9 - git merge: replace submodule containing a .git directory with a directory must fail
ok 56 - grep in working tree with grep.extendedRegexp=true
ok 57 - grep in working tree with grep.patterntype=basic
ok 58 - grep in working tree with grep.patterntype=extended
ok 59 - grep in working tree with grep.patterntype=fixed
ok 60 - grep in working tree with grep.patterntype=perl
ok 61 - grep in working tree with grep.patternType=default and grep.extendedRegexp=true
ok 62 - grep in working tree with grep.extendedRegexp=true and grep.patternType=default
ok 63 - grep in working tree with grep.patternType=extended and grep.extendedRegexp=false
ok 64 - grep in working tree with grep.patternType=basic and grep.extendedRegexp=true
ok 65 - grep in working tree with grep.extendedRegexp=false and grep.patternType=extended
ok 66 - grep in working tree with grep.extendedRegexp=true and grep.patternType=basic
ok 67 - grep --count in working tree
ok 68 - grep --count -h in working tree
ok 69 - grep -l -C
ok 70 - grep -l -C
ok 71 - grep -L -C
ok 5 - difftool forwards arguments to diff
ok 72 - grep -e A --and -e B
ok 73 - grep ( -e A --or -e B ) --and -e B
ok 74 - grep -e A --and --not -e B
ok 75 - grep should ignore GREP_OPTIONS
ok 76 - grep -f, non-existent file
ok 77 - grep -f, one pattern
ok 78 - grep -f, multiple patterns
ok 79 - grep, multiple patterns
ok 80 - grep -f, ignore empty lines
ok 81 - grep -f, ignore empty lines, read patterns from stdin
ok 82 - grep -q, silently report matches
ok 83 - grep -C1 hunk mark between files
ok 84 - log grep setup
ok 85 - log grep (1)
ok 86 - log grep (2)
ok 87 - log grep (3)
ok 88 - log grep (4)
ok 89 - log grep (5)
ok 90 - log grep (6)
ok 91 - log grep (7)
ok 92 - log grep (8)
ok 93 - log grep (9)
ok 94 - log grep (9)
ok 95 - log --grep-reflog can only be used under -g
ok 96 - log with multiple --grep uses union
not ok 10 - git merge: replace submodule with a file must fail # TODO known breakage
ok 97 - log --all-match with multiple --grep uses intersection
ok 98 - log with multiple --author uses union
ok 99 - log --all-match with multiple --author still uses union
ok 100 - log --grep --author uses intersection
ok 101 - log --grep --grep --author takes union of greps and intersects with author
ok 102 - log ---all-match -grep --author --author still takes union of authors and intersects with grep
ok 103 - log --grep --author --author takes union of authors and intersects with grep
ok 104 - log --all-match --grep --grep --author takes intersection
ok 105 - log --author does not search in timestamp
ok 106 - log --committer does not search in timestamp
ok 107 - grep with CE_VALID file
ok 108 - grep -p with userdiff
ok 109 - grep -p
ok 110 - grep -p -B5
ok 111 - grep -W
ok 112 - grep -W with userdiff
ok 6 - difftool honors --gui
ok 113 - grep from a subdirectory to search wider area (1)
ok 114 - grep from a subdirectory to search wider area (2)
ok 115 - grep -Fi
ok 7 - mergetool merges all from subdir
ok 116 - outside of git repository
ok 117 - inside git repository but with --no-index
ok 118 - setup double-dash tests
ok 119 - grep -- pattern
ok 120 - grep -- pattern -- pathspec
ok 121 - grep -e pattern -- path
ok 122 - grep -e -- -- path
ok 123 - grep --perl-regexp pattern
ok 124 - grep -P pattern
ok 125 - grep pattern with grep.extendedRegexp=true
ok 126 - grep -P pattern with grep.extendedRegexp=true
ok 127 - grep -P -v pattern
ok 128 - grep -P -i pattern
ok 129 - grep -P -w pattern
not ok 11 - git merge: replace submodule containing a .git directory with a file must fail # TODO known breakage
ok 130 - grep -G invalidpattern properly dies
ok 131 - grep invalidpattern properly dies with grep.patternType=basic
ok 132 - grep -E invalidpattern properly dies
ok 133 - grep invalidpattern properly dies with grep.patternType=extended
ok 134 - grep -P invalidpattern properly dies
ok 135 - grep invalidpattern properly dies with grep.patternType=perl
ok 136 - grep -G -E -F pattern
ok 137 - grep pattern with grep.patternType=basic, =extended, =fixed
ok 138 - grep -E -F -G pattern
ok 139 - grep pattern with grep.patternType=extended, =fixed, =basic
ok 140 - grep -F -G -E pattern
ok 141 - grep pattern with grep.patternType=fixed, =basic, =extended
ok 142 - grep -G -F -P -E pattern
ok 143 - grep pattern with grep.patternType=fixed, =basic, =perl, =extended
ok 144 - grep -G -F -E -P pattern
ok 145 - grep pattern with grep.patternType=fixed, =basic, =extended, =perl
ok 146 - grep -P pattern with grep.patternType=fixed
ok 147 - grep -F pattern with grep.patternType=basic
ok 148 - grep -G pattern with grep.patternType=fixed
ok 149 - grep -E pattern with grep.patternType=fixed
ok 150 - grep --color, separator
ok 151 - grep --break
ok 152 - grep --break with context
ok 153 - grep --heading
ok 154 - mimic ack-grep --group
ok 155 - grep -E "^ "
ok 156 - grep -P "^ "
# passed all 156 test(s)
1..156
*** t7811-grep-open.sh ***
ok 1 - determine default pager
ok 7 - difftool --gui last setting wins
ok 12 - git merge: modified submodule does not update submodule work tree
ok 2 - setup
ok 3 - git grep -O
ok 4 - git grep -O --cached
ok 5 - git grep -O --no-index
ok 6 - setup: fake "less"
ok 7 - git grep -O jumps to line in less
ok 8 - modified file
ok 9 - copes with color settings
ok 10 - run from subdir
# passed all 10 test(s)
1..10
*** t8001-annotate.sh ***
ok 1 - setup A lines
ok 2 - blame 1 author
ok 3 - setup B lines
ok 8 - mergetool skips resolved paths when rerere is active
ok 4 - blame 2 authors
ok 5 - setup B1 lines (branch1)
ok 8 - difftool --gui works without configured diff.guitool
ok 6 - blame 2 authors + 1 branch1 author
ok 7 - setup B2 lines (branch2)
ok 8 - blame 2 authors + 1 branch2 author
ok 9 - merge branch1 & branch2
ok 10 - blame 2 authors + 2 merged-in authors
ok 11 - blame ancestor
ok 12 - blame great-ancestor
ok 13 - setup evil merge
ok 14 - blame evil merge
ok 13 - git merge: modified submodule does not update submodule work tree to invalid commit
ok 9 - GIT_DIFF_TOOL variable
ok 9 - conflicted stash sets up rerere
ok 14 - git merge: modified submodule does not update submodule work tree from invalid commit
ok 15 - blame huge graft
ok 16 - setup incomplete line
ok 10 - mergetool takes partial path
ok 17 - blame incomplete line
ok 18 - setup edits
ok 19 - blame edits
ok 20 - setup obfuscated email
ok 21 - blame obfuscated email
ok 22 - blame -L 1 (all)
ok 23 - blame -L , (all)
ok 24 - blame -L X (X to end)
ok 25 - blame -L X, (X to end)
ok 26 - blame -L ,Y (up to Y)
ok 15 - git merge --ff: added submodule creates empty directory
ok 27 - blame -L X,X
ok 28 - blame -L X,Y
ok 29 - blame -L Y,X (undocumented)
ok 30 - blame -L -X
ok 31 - blame -L 0
ok 32 - blame -L ,0
ok 33 - blame -L ,+0
ok 34 - blame -L X,+0
ok 35 - blame -L X,+1
ok 36 - blame -L X,+N
ok 37 - blame -L ,-0
ok 38 - blame -L X,-0
ok 39 - blame -L X,-1
ok 40 - blame -L X,-N
ok 41 - blame -L /RE/ (RE to end)
ok 42 - blame -L /RE/,/RE2/
ok 43 - blame -L X,/RE/
ok 44 - blame -L /RE/,Y
ok 45 - blame -L /RE/,+N
ok 10 - GIT_DIFF_TOOL overrides
ok 46 - blame -L /RE/,-N
ok 47 - blame -L X (X == nlines)
ok 48 - blame -L X (X == nlines + 1)
ok 49 - blame -L X (X > nlines)
ok 50 - blame -L ,Y (Y == nlines)
ok 51 - blame -L ,Y (Y == nlines + 1)
ok 52 - blame -L ,Y (Y > nlines)
ok 53 - blame -L multiple (disjoint)
ok 54 - blame -L multiple (disjoint: unordered)
ok 55 - blame -L multiple (adjacent)
ok 56 - blame -L multiple (adjacent: unordered)
ok 57 - blame -L multiple (overlapping)
ok 58 - blame -L multiple (overlapping: unordered)
ok 59 - blame -L multiple (superset/subset)
ok 60 - blame -L multiple (superset/subset: unordered)
ok 16 - git merge --ff: added submodule leaves existing empty directory alone
ok 61 - blame -L /RE/ (relative)
ok 62 - blame -L /RE/ (relative: no preceding range)
ok 63 - blame -L /RE/ (relative: adjacent)
ok 64 - blame -L /RE/ (relative: not found)
ok 65 - blame -L /RE/ (relative: end-of-file)
ok 66 - blame -L ^/RE/ (absolute)
ok 67 - blame -L ^/RE/ (absolute: no preceding range)
ok 68 - blame -L ^/RE/ (absolute: not found)
ok 17 - git merge --ff: added submodule doesn't remove untracked unignored file with same name
ok 69 - blame -L ^/RE/ (absolute: end-of-file)
ok 11 - GIT_DIFFTOOL_NO_PROMPT variable
ok 70 - setup -L :regex
ok 71 - blame -L :literal
ok 72 - blame -L :regex
ok 73 - blame -L :nomatch
ok 74 - blame -L :RE (relative)
ok 75 - blame -L :RE (relative: no preceding range)
ok 76 - blame -L :RE (relative: not found)
ok 77 - blame -L :RE (relative: end-of-file)
ok 78 - blame -L ^:RE (absolute)
ok 79 - blame -L ^:RE (absolute: no preceding range)
ok 80 - blame -L ^:RE (absolute: not found)
ok 81 - blame -L ^:RE (absolute: end-of-file)
ok 82 - setup incremental
ok 83 - blame empty
ok 84 - blame -L 0 empty
ok 85 - blame -L 1 empty
ok 86 - blame -L 2 empty
ok 87 - blame half
ok 88 - blame -L 0 half
ok 89 - blame -L 1 half
ok 90 - blame -L 2 half
ok 91 - blame -L 3 half
ok 92 - blame full
ok 93 - blame -L 0 full
ok 94 - blame -L 1 full
ok 95 - blame -L 2 full
ok 96 - blame -L 3 full
ok 97 - blame -L
ok 98 - blame -L X,+
ok 99 - blame -L X,-
ok 100 - blame -L X (non-numeric X)
ok 101 - blame -L X,Y (non-numeric Y)
ok 102 - blame -L X,+N (non-numeric N)
ok 103 - blame -L X,-N (non-numeric N)
ok 18 - git merge --ff: replace tracked file with submodule creates empty directory
ok 104 - blame -L ,^/RE/
ok 105 - annotate old revision
# passed all 105 test(s)
1..105
ok 12 - GIT_DIFFTOOL_PROMPT variable
*** t8002-blame.sh ***
ok 1 - setup A lines
ok 2 - blame 1 author
ok 3 - setup B lines
ok 4 - blame 2 authors
ok 5 - setup B1 lines (branch1)
ok 6 - blame 2 authors + 1 branch1 author
ok 7 - setup B2 lines (branch2)
ok 8 - blame 2 authors + 1 branch2 author
ok 9 - merge branch1 & branch2
ok 10 - blame 2 authors + 2 merged-in authors
ok 11 - blame ancestor
ok 12 - blame great-ancestor
ok 13 - setup evil merge
ok 14 - blame evil merge
ok 19 - git merge --ff: replace directory with submodule
ok 13 - difftool.prompt config variable is false
ok 20 - git merge --ff: removed submodule leaves submodule directory and its contents in place
ok 14 - difftool merge.prompt = false
ok 15 - blame huge graft
ok 16 - setup incomplete line
ok 17 - blame incomplete line
ok 18 - setup edits
ok 19 - blame edits
ok 20 - setup obfuscated email
ok 21 - blame obfuscated email
ok 22 - blame -L 1 (all)
ok 23 - blame -L , (all)
ok 24 - blame -L X (X to end)
ok 25 - blame -L X, (X to end)
ok 26 - blame -L ,Y (up to Y)
ok 27 - blame -L X,X
ok 28 - blame -L X,Y
ok 29 - blame -L Y,X (undocumented)
ok 30 - blame -L -X
ok 31 - blame -L 0
ok 32 - blame -L ,0
ok 33 - blame -L ,+0
ok 34 - blame -L X,+0
ok 15 - difftool.prompt can overridden with -y
ok 35 - blame -L X,+1
ok 36 - blame -L X,+N
ok 37 - blame -L ,-0
ok 38 - blame -L X,-0
ok 39 - blame -L X,-1
ok 40 - blame -L X,-N
ok 21 - git merge --ff: removed submodule leaves submodule containing a .git directory alone
ok 41 - blame -L /RE/ (RE to end)
ok 42 - blame -L /RE/,/RE2/
ok 43 - blame -L X,/RE/
ok 44 - blame -L /RE/,Y
ok 45 - blame -L /RE/,+N
ok 46 - blame -L /RE/,-N
ok 47 - blame -L X (X == nlines)
ok 48 - blame -L X (X == nlines + 1)
ok 49 - blame -L X (X > nlines)
ok 50 - blame -L ,Y (Y == nlines)
ok 51 - blame -L ,Y (Y == nlines + 1)
ok 52 - blame -L ,Y (Y > nlines)
ok 53 - blame -L multiple (disjoint)
ok 54 - blame -L multiple (disjoint: unordered)
ok 55 - blame -L multiple (adjacent)
ok 56 - blame -L multiple (adjacent: unordered)
ok 57 - blame -L multiple (overlapping)
ok 58 - blame -L multiple (overlapping: unordered)
ok 59 - blame -L multiple (superset/subset)
ok 60 - blame -L multiple (superset/subset: unordered)
ok 16 - difftool.prompt can overridden with --prompt
ok 61 - blame -L /RE/ (relative)
ok 62 - blame -L /RE/ (relative: no preceding range)
ok 63 - blame -L /RE/ (relative: adjacent)
ok 64 - blame -L /RE/ (relative: not found)
ok 65 - blame -L /RE/ (relative: end-of-file)
ok 66 - blame -L ^/RE/ (absolute)
ok 67 - blame -L ^/RE/ (absolute: no preceding range)
ok 68 - blame -L ^/RE/ (absolute: not found)
ok 69 - blame -L ^/RE/ (absolute: end-of-file)
ok 22 - git merge --ff: replace submodule with a directory must fail
ok 70 - setup -L :regex
ok 71 - blame -L :literal
ok 72 - blame -L :regex
ok 73 - blame -L :nomatch
ok 74 - blame -L :RE (relative)
ok 75 - blame -L :RE (relative: no preceding range)
ok 76 - blame -L :RE (relative: not found)
ok 77 - blame -L :RE (relative: end-of-file)
ok 78 - blame -L ^:RE (absolute)
ok 79 - blame -L ^:RE (absolute: no preceding range)
ok 80 - blame -L ^:RE (absolute: not found)
ok 81 - blame -L ^:RE (absolute: end-of-file)
ok 82 - setup incremental
ok 83 - blame empty
ok 84 - blame -L 0 empty
ok 85 - blame -L 1 empty
ok 86 - blame -L 2 empty
ok 87 - blame half
ok 88 - blame -L 0 half
ok 89 - blame -L 1 half
ok 90 - blame -L 2 half
ok 91 - blame -L 3 half
ok 92 - blame full
ok 93 - blame -L 0 full
ok 94 - blame -L 1 full
ok 95 - blame -L 2 full
ok 96 - blame -L 3 full
ok 97 - blame -L
ok 98 - blame -L X,+
ok 99 - blame -L X,-
ok 100 - blame -L X (non-numeric X)
ok 101 - blame -L X,Y (non-numeric Y)
ok 102 - blame -L X,+N (non-numeric N)
ok 103 - blame -L X,-N (non-numeric N)
ok 104 - blame -L ,^/RE/
ok 105 - blame --show-email
# passed all 105 test(s)
1..105
ok 23 - git merge --ff: replace submodule containing a .git directory with a directory must fail
*** t8003-blame-corner-cases.sh ***
ok 17 - difftool last flag wins
ok 1 - setup
ok 2 - straight copy without -C
ok 3 - straight move without -C
ok 4 - straight copy with -C
ok 5 - straight move with -C
ok 6 - straight copy with -C -C
ok 7 - straight move with -C -C
ok 8 - append without -C
ok 9 - append with -C
ok 10 - append with -C -C
ok 11 - append with -C -C -C
ok 12 - blame wholesale copy
ok 13 - blame wholesale copy and more
ok 14 - blame path that used to be a directory
ok 15 - blame to a commit with no author name
ok 16 - blame -L with invalid start
ok 17 - blame -L with invalid end
ok 18 - blame parses <end> part of -L
ok 19 - indent of line numbers, nine lines
ok 20 - indent of line numbers, ten lines
not ok 24 - git merge --ff: replace submodule with a file must fail # TODO known breakage
ok 21 - blaming files with CRLF newlines
# passed all 21 test(s)
1..21
*** t8004-blame-with-conflicts.sh ***
ok 1 - setup first case
ok 2 - blame runs on unconflicted file while other file has conflicts
ok 3 - blame does not crash with conflicted file in stages 1,3
# passed all 3 test(s)
1..3
*** t8005-blame-i18n.sh ***
ok 1 - setup the repository
ok 2 - blame respects i18n.commitencoding
ok 3 - blame respects i18n.logoutputencoding
ok 4 - blame respects --encoding=UTF-8
ok 5 - blame respects --encoding=none
# passed all 5 test(s)
1..5
*** t8006-blame-textconv.sh ***
not ok 25 - git merge --ff: replace submodule containing a .git directory with a file must fail # TODO known breakage
ok 18 - difftool + mergetool config variables
ok 1 - setup
ok 2 - no filter specified
ok 3 - setup textconv filters
ok 4 - blame with --no-textconv
ok 5 - basic blame on last commit
ok 11 - deleted vs modified submodule
ok 6 - blame --textconv going through revisions
ok 7 - blame --textconv with local changes
ok 8 - setup +cachetextconv
ok 9 - blame --textconv works with textconvcache
ok 10 - setup -cachetextconv
ok 19 - difftool.<tool>.path
ok 11 - make a new commit
ok 12 - blame from previous revision
ok 13 - blame with --no-textconv (on symlink)
ok 14 - blame --textconv (on symlink)
ok 15 - make another new commit
ok 26 - git merge --ff: modified submodule does not update submodule work tree
ok 16 - blame on last commit (-C -C, symlink)
# passed all 16 test(s)
1..16
*** t8007-cat-file-textconv.sh ***
ok 20 - difftool --extcmd=cat
ok 1 - setup
ok 2 - no filter specified
ok 3 - setup textconv filters
ok 4 - cat-file without --textconv
ok 5 - cat-file without --textconv on previous commit
ok 6 - cat-file --textconv on last commit
ok 7 - cat-file --textconv on previous commit
ok 8 - cat-file without --textconv (symlink)
ok 9 - cat-file --textconv on index (symlink)
ok 10 - cat-file --textconv on HEAD (symlink)
# passed all 10 test(s)
1..10
*** t8008-blame-formats.sh ***
ok 1 - setup
ok 2 - normal blame output
ok 3 - blame --porcelain output
ok 4 - blame --line-porcelain output
# passed all 4 test(s)
1..4
*** t9001-send-email.sh ***
ok 1 - prepare reference tree
ok 2 - Setup helper tool
ok 21 - difftool --extcmd cat
ok 3 - Extract patches
ok 27 - git merge --ff: modified submodule does not update submodule work tree to invalid commit
ok 22 - difftool -x cat
ok 28 - git merge --ff: modified submodule does not update submodule work tree from invalid commit
ok 4 - No confirm with --suppress-cc
ok 23 - difftool --extcmd echo arg1
ok 24 - difftool --extcmd cat arg1
ok 29 - git merge --ff-only: added submodule creates empty directory
ok 5 - No confirm with --confirm=never
ok 25 - difftool --extcmd cat arg2
ok 26 - setup with 2 files different
ok 30 - git merge --ff-only: added submodule leaves existing empty directory alone
ok 31 - git merge --ff-only: added submodule doesn't remove untracked unignored file with same name
ok 27 - say no to the first file
ok 6 - No confirm with sendemail.confirm=never
ok 32 - git merge --ff-only: replace tracked file with submodule creates empty directory
ok 28 - say no to the second file
ok 7 - Send patches
ok 8 - setup expect
ok 9 - Verify commandline
ok 33 - git merge --ff-only: replace directory with submodule
ok 29 - difftool --tool-help
ok 10 - Send patches with --envelope-sender
ok 11 - setup expect
ok 12 - Verify commandline
ok 30 - setup change in subdirectory
ok 34 - git merge --ff-only: removed submodule leaves submodule directory and its contents in place
ok 31 - difftool -d --no-symlinks
ok 35 - git merge --ff-only: removed submodule leaves submodule containing a .git directory alone
ok 13 - Send patches with --envelope-sender=auto
ok 14 - setup expect
ok 15 - Verify commandline
ok 16 - setup expect
ok 32 - difftool -d --symlinks
ok 36 - git merge --ff-only: replace submodule with a directory must fail
ok 12 - file vs modified submodule
ok 17 - self name is suppressed
ok 33 - difftool --dir-diff --no-symlinks
ok 37 - git merge --ff-only: replace submodule containing a .git directory with a directory must fail
ok 34 - difftool --dir-diff --symlinks
ok 18 - self name with dot is suppressed
not ok 38 - git merge --ff-only: replace submodule with a file must fail # TODO known breakage
ok 35 - difftool --dir-diff ignores --prompt --no-symlinks
ok 36 - difftool --dir-diff ignores --prompt --symlinks
not ok 39 - git merge --ff-only: replace submodule containing a .git directory with a file must fail # TODO known breakage
ok 13 - submodule in subdirectory
ok 19 - non-ascii self name is suppressed
ok 37 - difftool --dir-diff from subdirectory --no-symlinks
ok 40 - git merge --ff-only: modified submodule does not update submodule work tree
ok 20 - sanitized self name is suppressed
ok 38 - difftool --dir-diff from subdirectory --symlinks
ok 21 - Show all headers
ok 14 - directory vs modified submodule
ok 39 - difftool --dir-diff when worktree file is missing --no-symlinks
ok 41 - git merge --ff-only: modified submodule does not update submodule work tree to invalid commit
ok 15 - file with no base
ok 16 - custom commands override built-ins
# passed all 16 test(s)
1..16
ok 40 - difftool --dir-diff when worktree file is missing --symlinks
*** t9002-column.sh ***
ok 1 - setup
ok 2 - never
ok 42 - git merge --ff-only: modified submodule does not update submodule work tree from invalid commit
ok 3 - always
ok 4 - 80 columns
ok 5 - COLUMNS = 1
ok 6 - width = 1
ok 7 - 20 columns
ok 8 - 20 columns, nodense
ok 9 - 20 columns, dense
ok 22 - Prompting works
ok 10 - 20 columns, padding 2
ok 11 - 20 columns, indented
ok 23 # skip implicit ident is allowed (missing AUTOIDENT of PERL,AUTOIDENT)
ok 12 - 20 columns, row first
ok 13 - 20 columns, row first, nodense
ok 14 - 20 columns, row first, dense
# passed all 14 test(s)
1..14
*** t9010-svn-fe.sh ***
ok 1 - empty dump
ok 2 - v4 dumps not supported
not ok 3 - empty revision # TODO known breakage
ok 4 - empty properties
ok 41 - difftool --dir-diff --symlink without unstaged changes
ok 43 - git merge --no-ff: added submodule creates empty directory
ok 5 - author name and commit message
ok 6 - unsupported properties are ignored
not ok 7 - timestamp and empty file # TODO known breakage
ok 24 - broken implicit ident aborts send-email
ok 8 - directory with files
ok 42 - difftool --dir-diff syncs worktree with unstaged change --no-symlinks
ok 44 - git merge --no-ff: added submodule leaves existing empty directory alone
ok 9 - branch name with backslash
ok 10 - node without action
ok 45 - git merge --no-ff: added submodule doesn't remove untracked unignored file with same name
ok 11 - action: add node without text
not ok 12 - change file mode but keep old content # TODO known breakage
ok 43 - difftool --dir-diff syncs worktree with unstaged change --symlinks
ok 25 - tocmd works
ok 13 - NUL in property value
ok 46 - git merge --no-ff: replace tracked file with submodule creates empty directory
ok 14 - NUL in log message, file content, and property name
ok 15 - change file mode and reiterate content
not ok 47 - git merge --no-ff: replace directory with submodule # TODO known breakage
ok 44 - difftool --dir-diff syncs worktree without unstaged change --no-symlinks
ok 16 - deltas supported
ok 17 - property deltas supported
ok 26 - cccmd works
ok 18 - properties on /
ok 19 - deltas for typechange
ok 48 - git merge --no-ff: removed submodule leaves submodule directory and its contents in place
ok 45 - difftool --dir-diff syncs worktree without unstaged change --symlinks
ok 20 - deltas need not consume the whole preimage
ok 21 - no hang for delta trying to read past end of preimage
ok 27 - reject long lines
ok 28 - no patch was sent
ok 46 - difftool --no-symlinks does not overwrite working tree file
ok 49 - git merge --no-ff: removed submodule leaves submodule containing a .git directory alone
ok 47 - difftool --no-symlinks detects conflict
not ok 50 - git merge --no-ff: replace submodule with a directory must fail # TODO known breakage
ok 29 - Author From: in message body
not ok 51 - git merge --no-ff: replace submodule containing a .git directory with a directory must fail # TODO known breakage
ok 48 - difftool properly honors gitlink and core.worktree
# passed all 48 test(s)
1..48
*** t9011-svn-da.sh ***
ok 1 - reject empty delta
ok 2 - delta can empty file
ok 3 - reject svndiff2
ok 30 - Author From: not in message body
ok 4 - one-window empty delta
ok 5 - reject incomplete window header
ok 6 - reject declared delta longer than actual delta
ok 7 - two-window empty delta
ok 8 - noisy zeroes
ok 9 - reject variable-length int in magic
ok 10 - reject truncated integer
ok 11 - nonempty (but unused) preimage view
ok 12 - preimage view: right endpoint cannot backtrack
ok 13 - preimage view: left endpoint can advance
not ok 52 - git merge --no-ff: replace submodule with a file must fail # TODO known breakage
ok 14 - preimage view: offsets compared by value
ok 15 - preimage view: reject truncated preimage
ok 16 - forbid unconsumed inline data
ok 17 - reject truncated inline data
ok 18 - reject truncated inline data (after instruction section)
ok 19 - copyfrom_data
ok 20 - multiple copyfrom_data
ok 21 - incomplete multiple insn
ok 22 - catch attempt to copy missing data
ok 23 - copyfrom target to repeat data
ok 24 - copyfrom target out of order
ok 25 - catch copyfrom future
ok 26 - copy to sustain
ok 27 - catch copy that overflows
ok 28 - copyfrom source
ok 29 - copy backwards
ok 30 - offsets are relative to window
ok 31 - example from notes/svndiff
# passed all 31 test(s)
1..31
*** t9020-remote-svn.sh ***
ok 31 - allow long lines with --no-validate
not ok 53 - git merge --no-ff: replace submodule containing a .git directory with a file must fail # TODO known breakage
ok 1 - simple fetch
ok 22 - set up svn repo
ok 2 - repeated fetch, nothing shall change
ok 3 - fetch from a file:// url gives the same result
not ok 4 - the sha1 differ because the git-svn-id line in the commit msg contains the url # TODO known breakage
ok 23 - t9135/svn.dump
# still have 3 known breakage(s)
# passed all remaining 20 test(s)
1..23
ok 5 - mark-file regeneration
*** t9100-git-svn-basic.sh ***
ok 54 - git merge --no-ff: modified submodule does not update submodule work tree
ok 32 - Invalid In-Reply-To
ok 6 - incremental imports must lead to the same head
# still have 1 known breakage(s)
# passed all remaining 5 test(s)
1..6
*** t9101-git-svn-props.sh ***
define NO_SVN_TESTS to skip git svn tests
# UTF-8 locale not set, some tests skipped (POSIX)
ok 55 - git merge --no-ff: modified submodule does not update submodule work tree to invalid commit
ok 33 - Valid In-Reply-To when prompting
ok 56 - git merge --no-ff: modified submodule does not update submodule work tree from invalid commit
# still have 11 known breakage(s)
# passed all remaining 45 test(s)
1..56
*** t9102-git-svn-deep-rmdir.sh ***
ok 34 - In-Reply-To without --chain-reply-to
ok 1 - checkout working copy from svn
ok 35 - In-Reply-To with --chain-reply-to
ok 36 - setup fake editor
ok 1 - initialize git svn
ok 1 - initialize repo
ok 37 - --compose works
ok 38 - first message is compose text
ok 39 - second message is patch
ok 40 - setup expect
ok 2 - setup some commits to svn
ok 41 - sendemail.cc set
ok 42 - setup expect
ok 43 - sendemail.cc unset
ok 44 - setup expect
ok 2 - import an SVN revision into git
ok 3 - checkout from svn
ok 3 - initialize git svn
ok 45 - sendemail.cccmd
ok 46 - setup expect
ok 47 - --suppress-cc=all
ok 48 - setup expect
ok 2 - mirror via git svn
ok 49 - --suppress-cc=body
ok 50 - setup expect
ok 51 - --suppress-cc=body --suppress-cc=cccmd
ok 52 - setup expect
ok 4 - try a deep --rmdir with a commit
ok 4 - fetch revisions from svn
ok 53 - --suppress-cc=sob
ok 54 - setup expect
ok 3 - Try a commit on rmdir
# passed all 3 test(s)
1..3
ok 55 - --suppress-cc=bodycc
ok 56 - setup expect
*** t9103-git-svn-tracked-directory-removed.sh ***
ok 57 - --suppress-cc=cc
ok 5 - detect node change from file to directory #1
ok 5 - test svn:keywords ignoring
ok 6 - raw $Id$ found in kw.c
ok 58 - --confirm=always
ok 59 - --confirm=auto
ok 7 - propset CR on crlf files
ok 1 - make history for tracking
ok 6 - detect node change from directory to file #1
ok 60 - --confirm=cc
ok 61 - --confirm=compose
ok 62 - confirm by default (due to cc)
ok 8 - fetch and pull latest from svn and checkout a new wc
ok 9 - Comparing crlf
ok 10 - Comparing ne_crlf
ok 11 - Comparing lf
ok 12 - Comparing ne_lf
ok 13 - Comparing cr
ok 14 - Comparing ne_cr
ok 15 - Comparing empty_cr
ok 16 - Comparing empty_lf
ok 17 - Comparing empty
ok 18 - Comparing empty_crlf
ok 63 - confirm by default (due to --compose)
ok 2 - clone repo with git
ok 19 - Set CRLF on cr files
ok 64 - confirm detects EOF (inform assumes y)
ok 7 - detect node change from file to directory #2
ok 65 - confirm detects EOF (auto causes failure)
ok 66 - confirm does not loop forever
ok 20 - fetch and pull latest from svn
ok 21 - CRLF + $Id$
ok 22 - CRLF + $Id$ (no newline)
ok 8 - detect node change from directory to file #2
ok 67 - utf8 Cc is rfc2047 encoded
ok 68 - --compose adds MIME for utf8 body
ok 3 - make sure r2 still has old file
# passed all 3 test(s)
1..3
ok 69 - --compose respects user mime type
*** t9104-git-svn-follow-parent.sh ***
ok 23 - test show-ignore
ok 70 - --compose adds MIME for utf8 subject
ok 9 - remove executable bit from a file
ok 71 - utf8 author is correctly passed on
ok 1 - initialize repo
ok 72 - utf8 sender is not duplicated
ok 73 - sendemail.composeencoding works
ok 10 - add executable bit back file
ok 24 - test create-ignore
ok 74 - --compose-encoding works
ok 75 - --compose-encoding overrides sendemail.composeencoding
ok 76 - --compose-encoding adds correct MIME for subject
ok 11 - executable file becomes a symlink to file
ok 77 - detects ambiguous reference/file conflict
ok 2 - init and fetch a moved directory
ok 78 - feed two files
ok 79 - in-reply-to but no threading
ok 80 - no in-reply-to and no threading
ok 12 - new symlink is added to a file that was also just made executable
ok 3 - init and fetch from one svn-remote
ok 81 - threading but no chain-reply-to
ok 82 - sendemail.to works
ok 83 - --no-to overrides sendemail.to
ok 13 - modify a symlink to become a file
ok 14 # skip commit with UTF-8 message: locale: POSIX (missing UTF8)
ok 84 - sendemail.cc works
ok 85 - --no-cc overrides sendemail.cc
ok 86 - sendemail.bcc works
ok 4 - follow deleted parent
ok 87 - --no-bcc overrides sendemail.bcc
ok 88 - patches To headers are used by default
ok 25 - test propget
ok 89 - patches To headers are appended to
ok 15 - test fetch functionality (svn => git) with alternate GIT_SVN_ID
ok 16 - check imported tree checksums expected tree checksums
ok 90 - To headers from files reset each patch
ok 91 - setup expect
ok 92 - setup expect
ok 93 - ASCII subject is not RFC2047 quoted
ok 94 - setup expect
ok 17 - exit if remote refs are ambigious
ok 95 - asks about and fixes 8bit encodings
ok 26 - test proplist
# passed all 26 test(s)
1..26
*** t9105-git-svn-commit-diff.sh ***
ok 5 - follow larger parent
ok 96 - sendemail.8bitEncoding works
ok 97 - --8bit-encoding overrides sendemail.8bitEncoding
ok 98 - setup expect
ok 99 - setup expect
ok 1 - initialize repo
ok 18 - exit if init-ing a would clobber a URL
ok 100 - --8bit-encoding also treats subject
ok 101 - refusing to send cover letter template
ok 19 - init allows us to connect to another directory in the same repo
ok 102 - --force sends cover letter template anyway
ok 2 - test the commit-diff command
ok 103 - to-cover adds To to all mail
ok 104 - cc-cover adds Cc to all mail
ok 105 - tocover adds To to all mail
ok 106 - cccover adds Cc to all mail
ok 6 - follow higher-level parent
ok 107 - sendemail.aliasfiletype=mailrc
ok 20 - dcommit $rev does not clobber current branch
ok 108 - sendemail.aliasfile=~/.mailrc
# passed all 108 test(s)
1..108
*** t9106-git-svn-commit-diff-clobber.sh ***
ok 1 - initialize repo
ok 3 - commit-diff to a sub-directory (with git svn config)
# passed all 3 test(s)
1..3
*** t9107-git-svn-migrate.sh ***
ok 2 - commit change from svn side
ok 3 - commit conflicting change from git
ok 7 - follow deleted directory
ok 4 - commit complementing change from git
ok 1 - setup old-looking metadata
ok 2 - git-svn-HEAD is a real HEAD
ok 3 - initialize old-style (v0) git svn layout
ok 4 - initialize a multi-repository repo
ok 21 - able to dcommit to a subdirectory
ok 8 - follow-parent avoids deleting relevant info
ok 5 - dcommit fails to commit because of conflict
ok 22 - dcommit should not fail with a touched file
ok 5 - multi-fetch works on partial urls + paths
ok 23 - rebase should not fail with a touched file
ok 6 - migrate --minimize on old inited layout
ok 9 - track initial change if it was only made to parent
ok 6 - dcommit does the svn equivalent of an index merge
ok 7 - commit another change from svn side
ok 24 - able to set-tree to a subdirectory
ok 7 - .rev_db auto-converted to .rev_map.UUID
# passed all 7 test(s)
1..7
*** t9108-git-svn-glob.sh ***
ok 8 - multiple dcommit from git svn will not clobber svn
ok 9 - check that rebase really failed
ok 25 - git-svn works in a bare repository
ok 10 - resolve, continue the rebase and dcommit
# passed all 10 test(s)
1..10
*** t9109-git-svn-multi-glob.sh ***
ok 1 - test refspec globbing
ok 26 - git-svn works in in a repository with a gitdir: link
# passed all 26 test(s)
1..26
*** t9110-git-svn-use-svm-props.sh ***
ok 1 - test refspec globbing
ok 2 - test left-hand-side only globbing
ok 3 - test disallow multi-globs
# passed all 3 test(s)
1..3
*** t9111-git-svn-use-svnsync-props.sh ***
ok 2 - test left-hand-side only globbing
ok 10 - follow-parent is atomic
ok 11 - track multi-parent paths
ok 3 - test another branch
ok 12 - multi-fetch continues to work
ok 1 - load svm repo
ok 2 - verify metadata for /bar
ok 3 - verify metadata for /dir/a/b/c/d/e
ok 4 - verify metadata for /dir
ok 4 - test disallow multiple globs
# passed all 4 test(s)
1..4
*** t9112-git-svn-md5less-file.sh ***
ok 5 - find commit based on SVN revision number
ok 1 - load svn dumpfile
ok 2 - initialize git svn
ok 6 - empty rebase
# passed all 6 test(s)
1..6
*** t9113-git-svn-dcommit-new-file.sh ***
1..0 # SKIP skipping svnserve test. (set $SVNSERVE_PORT to enable)
*** t9114-git-svn-dcommit-merge.sh ***
ok 1 - load svnsync repo
ok 2 - verify metadata for /bar
ok 3 - verify metadata for /dir/a/b/c/d/e
ok 4 - verify metadata for /dir
# passed all 4 test(s)
1..4
ok 1 - setup svn repository
*** t9115-git-svn-dcommit-funky-renames.sh ***
ok 3 - fetch revisions from svn
# passed all 3 test(s)
1..3
*** t9116-git-svn-log.sh ***
ok 1 - load repository with strange names
ok 13 - multi-fetch works off a 'clean' repository
# passed all 13 test(s)
1..13
*** t9117-git-svn-init-clone.sh ***
ok 2 - setup git mirror and merge
ok 3 - verify pre-merge ancestry
ok 1 - setup svnrepo
ok 2 - init and fetch repository
ok 2 - basic clone
ok 4 - git svn dcommit merges
ok 5 - verify post-merge ancestry
ok 6 - verify merge commit message
# passed all 6 test(s)
1..6
*** t9118-git-svn-funky-branch-names.sh ***
ok 3 - create file in existing ugly and empty dir
ok 3 - clone to target directory
ok 4 - rename ugly file
ok 4 - clone with --stdlayout
ok 1 - setup svnrepo
ok 5 - clone to target directory with --stdlayout
ok 6 - init without -s/-T/-b/-t does not warn
ok 5 - rename pretty file
ok 2 - test clone with funky branch names
ok 7 - clone without -s/-T/-b/-t does not warn
ok 1 - setup repository and import
ok 6 - rename pretty file into ugly one
ok 8 - init with -s/-T/-b/-t assumes --prefix=origin/
ok 3 - test dcommit to funky branch
ok 9 - clone with -s/-T/-b/-t assumes --prefix=origin/
ok 4 - test dcommit to scary branch
ok 7 - add a file with plus signs
ok 10 - init with -s/-T/-b/-t and --prefix "" still works
ok 2 - run log
ok 5 - test dcommit to trailing_dotlock branch
# passed all 5 test(s)
1..5
*** t9119-git-svn-info.sh ***
ok 3 - run log against a from trunk
1..0 # SKIP skipping svn-info test (SVN version: 1.8.10 not supported)
ok 8 - clone the repository to test rebase
*** t9120-git-svn-clone-with-percent-escapes.sh ***
ok 11 - clone with -s/-T/-b/-t and --prefix "" still works
# passed all 11 test(s)
1..11
*** t9121-git-svn-fetch-renamed-dir.sh ***
ok 4 - test ascending revision range
ok 1 - load repository with renamed directory
ok 1 - setup svnrepo
ok 9 - make a commit to test rebase
ok 5 - test ascending revision range with --show-commit
ok 2 - test clone with percent escapes
ok 3 - svn checkout with percent escapes
ok 4 - svn checkout with space
ok 10 - git svn rebase works inside a fresh-cloned repository
# passed all 10 test(s)
1..10
*** t9122-git-svn-author.sh ***
ok 2 - init and fetch repository
# passed all 2 test(s)
1..2
*** t9123-git-svn-rebuild-with-rewriteroot.sh ***
ok 1 - setup svn repository
ok 5 - test clone trunk with percent escapes and minimize-url
ok 6 - test ascending revision range with --show-commit (sha1)
ok 6 - test clone trunk with percent escapes
ok 1 - init, fetch and checkout repository
ok 2 - remove rev_map
ok 7 - test descending revision range
ok 7 - test clone --stdlayout with percent escapes
ok 8 - test ascending revision range with unreachable revision
ok 3 - rebuild rev_map
# passed all 3 test(s)
1..3
*** t9124-git-svn-dcommit-auto-props.sh ***
ok 9 - test descending revision range with unreachable revision
ok 10 - test ascending revision range with unreachable upper boundary revision and 1 commit
ok 8 - test clone -s with unescaped space
# passed all 8 test(s)
1..8
*** t9125-git-svn-multi-glob-branch-names.sh ***
ok 11 - test descending revision range with unreachable upper boundary revision and 1 commit
ok 1 - initialize git svn
ok 2 - enable auto-props config
ok 1 - setup svnrepo
ok 2 - interact with it via git svn
# passed all 2 test(s)
1..2
*** t9126-git-svn-follow-deleted-readded-directory.sh ***
ok 12 - test ascending revision range with unreachable lower boundary revision and 1 commit
1..0 # SKIP skipping svnserve test. (set $SVNSERVE_PORT to enable)
*** t9127-git-svn-partial-rebuild.sh ***
ok 3 - add files matching auto-props
ok 4 - disable auto-props config
ok 13 - test descending revision range with unreachable lower boundary revision and 1 commit
ok 2 - test clone with multi-glob in branch names
ok 14 - test ascending revision range with unreachable boundary revisions and no commits
ok 5 - add files matching disabled auto-props
ok 1 - initialize svnrepo
ok 6 - check resulting svn repository
ok 3 - test dcommit to multi-globbed branch
# passed all 3 test(s)
1..3
*** t9128-git-svn-cmd-branch.sh ***
ok 15 - test descending revision range with unreachable boundary revisions and no commits
ok 1 - initialize svnrepo
ok 16 - test ascending revision range with unreachable boundary revisions and 1 commit
ok 2 - import an early SVN revision into git
ok 7 - check renamed file
# passed all 7 test(s)
1..7
*** t9129-git-svn-i18n-commitencoding.sh ***
ok 17 - test descending revision range with unreachable boundary revisions and 1 commit
# passed all 17 test(s)
1..17
*** t9130-git-svn-authors-file.sh ***
ok 1 - ISO8859-1 setup
ok 1 - setup svnrepo
ok 2 - import into git
ok 3 - make full git mirror of SVN
ok 2 - start import with incomplete authors file
ok 3 - imported 2 revisions successfully
ok 2 - eucJP setup
ok 4 - fetch from git mirror and partial-rebuild
# passed all 4 test(s)
1..4
*** t9131-git-svn-empty-symlink.sh ***
ok 4 - continues to import once authors have been added
ok 3 - ISO-2022-JP setup
ok 4 - ISO8859-1 commit on git side
ok 5 - eucJP commit on git side
ok 1 - load svn dumpfile
ok 6 - ISO-2022-JP commit on git side
ok 2 - clone using git svn
ok 3 - enable broken symlink workaround
ok 4 - "bar" is an empty file
ok 7 - ISO8859-1 dcommit to svn
ok 5 - authors-file against globs
ok 5 - get "bar" => symlink fix from svn
ok 6 - "bar" becomes a symlink
ok 8 - eucJP dcommit to svn
ok 6 - fetch fails on ee
ok 7 - failure happened without negative side effects
ok 7 - clone using git svn
ok 8 - disable broken symlink workaround
ok 9 - "bar" is an empty file
ok 8 - fetch continues after authors-file is fixed
ok 9 - ISO-2022-JP dcommit to svn
ok 10 - get "bar" => symlink fix from svn
ok 11 - "bar" does not become a symlink
ok 10 - ISO-8859-1 should match UTF-8 in svn
ok 12 - clone using git svn
ok 13 - "bar" is an empty file
ok 11 - eucJP should match UTF-8 in svn
ok 9 - fresh clone with svn.authors-file in config
# passed all 9 test(s)
1..9
*** t9132-git-svn-broken-symlink.sh ***
ok 12 - ISO-2022-JP should match UTF-8 in svn
# passed all 12 test(s)
1..12
*** t9133-git-svn-nested-git-repo.sh ***
ok 1 - load svn dumpfile
ok 14 - get "bar" => symlink fix from svn
ok 15 - "bar" does not become a symlink
# passed all 15 test(s)
1..15
*** t9134-git-svn-ignore-paths.sh ***
ok 2 - clone using git svn
ok 3 - "bar" is a symlink that points to "asdf"
ok 1 - setup test repository
ok 1 - setup repo with a git repo inside it
ok 4 - get "bar" => symlink fix from svn
ok 5 - "bar" remains a proper symlink
# passed all 5 test(s)
1..5
*** t9135-git-svn-moved-branch-empty-file.sh ***
ok 2 - clone an SVN repository with ignored www directory
ok 2 - clone an SVN repo containing a git repo
ok 3 - SVN-side change outside of .git
ok 3 - git svn branch tests
ok 4 - update git svn-cloned repo
ok 1 - load svn dumpfile
ok 3 - init+fetch an SVN repository with ignored www directory
ok 4 - verify ignore-paths config saved by clone
ok 5 - SVN-side change inside of .git
ok 5 - SVN-side change outside of www
ok 6 - update git svn-cloned repo
ok 6 - update git svn-cloned repo (config ignore)
ok 7 - SVN-side change in and out of .git
ok 2 - clone using git svn
ok 3 - test that b1 exists and is empty
# passed all 3 test(s)
1..3
*** t9136-git-svn-recreated-branch-empty-file.sh ***
ok 7 - update git svn-cloned repo (option ignore)
ok 8 - update git svn-cloned repo again
# passed all 8 test(s)
1..8
*** t9137-git-svn-dcommit-clobber-series.sh ***
ok 8 - SVN-side change inside of ignored www
ok 1 - load svn dumpfile
ok 9 - update git svn-cloned repo (config ignore)
ok 4 - branch uses correct svn-remote
# passed all 4 test(s)
1..4
*** t9138-git-svn-authors-prog.sh ***
ok 1 - svn-authors setup
ok 10 - update git svn-cloned repo (option ignore)
ok 1 - initialize repo
ok 11 - SVN-side change in and out of ignored www
ok 2 - (supposedly) non-conflicting change from SVN
ok 3 - some unrelated changes to git
ok 2 - setup svnrepo
ok 2 - clone using git svn
# passed all 2 test(s)
1..2
*** t9139-git-svn-non-utf8-commitencoding.sh ***
ok 12 - update git svn-cloned repo again (config ignore)
ok 3 - import authors with prog and file
ok 4 - imported 6 revisions successfully
ok 5 - authors-prog ran correctly
ok 6 - authors-file overrode authors-prog
ok 1 - ISO8859-1 setup
ok 13 - update git svn-cloned repo again (option ignore)
# passed all 13 test(s)
1..13
*** t9140-git-svn-reset.sh ***
ok 4 - change file but in unrelated area
ok 7 - authors-prog handled special characters in username
# passed all 7 test(s)
1..7
*** t9141-git-svn-multiple-branches.sh ***
ok 2 - eucJP setup
ok 3 - ISO8859-1 commit on git side
ok 4 - eucJP commit on git side
ok 1 - setup test repository
ok 5 - attempt to dcommit with a dirty index
# passed all 5 test(s)
1..5
*** t9142-git-svn-shallow-clone.sh ***
ok 5 - ISO8859-1 dcommit to svn
ok 1 - setup test repository
ok 6 - eucJP dcommit to svn
# passed all 6 test(s)
1..6
*** t9143-git-svn-gc.sh ***
ok 2 - clone SVN repository with hidden directory
ok 3 - modify hidden file in SVN repo
ok 1 - setup directories and test repo
ok 2 - checkout working copy from svn
ok 2 - clone trunk with "-r HEAD"
# passed all 2 test(s)
1..2
*** t9144-git-svn-old-rev_map.sh ***
ok 3 - set some properties to create an unhandled.log file
ok 4 - Setup repo
ok 4 - fetch fails on modified hidden file
ok 5 - Fetch repo
ok 6 - make backup copy of unhandled.log
ok 7 - create leftover index
ok 1 - setup svnrepo
ok 1 - setup test repository with old layout
ok 8 - git svn gc runs
ok 9 - git svn index removed
ok 10 - git svn gc produces a valid gzip file
ok 11 - git svn gc does not change unhandled.log files
# passed all 11 test(s)
1..11
*** t9145-git-svn-master-branch.sh ***
ok 5 - reset unwinds back to r1
ok 1 - setup test repository
ok 2 - git svn clone --stdlayout sets up trunk as master
# passed all 2 test(s)
1..2
*** t9146-git-svn-empty-dirs.sh ***
ok 6 - refetch succeeds not ignoring any files
# passed all 6 test(s)
1..6
*** t9147-git-svn-include-paths.sh ***
ok 2 - old layout continues to work
# passed all 2 test(s)
1..2
*** t9150-svk-mergetickets.sh ***
ok 1 - setup test repository
ok 2 - clone multiple branch and tag paths
ok 2 - clone an SVN repository with filter to include qqq directory
ok 1 - initialize repo
ok 3 - Multiple branch or tag paths require -d
ok 2 - clone
ok 3 - empty directories exist
ok 3 - init+fetch an SVN repository with included qqq directory
ok 4 - verify include-paths config saved by clone
ok 5 - SVN-side change outside of www
ok 1 - load svk depot
ok 2 - svk merges were represented coming in
# passed all 2 test(s)
1..2
*** t9151-svn-mergeinfo.sh ***
ok 6 - update git svn-cloned repo (config include)
ok 4 - option automkdirs set to false
ok 5 - more emptiness
ok 7 - update git svn-cloned repo (option include)
ok 8 - SVN-side change inside of ignored www
ok 6 - git svn rebase creates empty directory
ok 9 - update git svn-cloned repo (config include)
ok 7 - git svn mkdirs recreates empty directories
ok 10 - update git svn-cloned repo (option include)
ok 11 - SVN-side change in and out of included qqq
ok 4 - create new branches and tags
# passed all 4 test(s)
1..4
*** t9152-svn-empty-dirs-after-gc.sh ***
ok 8 - git svn mkdirs -r works
ok 9 - initialize trunk
ok 12 - update git svn-cloned repo again (config include)
ok 13 - update git svn-cloned repo again (option include)
# passed all 13 test(s)
1..13
*** t9153-git-svn-rewrite-uuid.sh ***
ok 10 - clone trunk
ok 11 - empty directories in trunk exist
ok 1 - initialize repo
ok 12 - remove a top-level directory from svn
ok 2 - clone
ok 13 - removed top-level directory does not exist
ok 3 - git svn gc runs
ok 1 - load svn repo
ok 2 - verify uuid
# passed all 2 test(s)
1..2
*** t9154-git-svn-fancy-glob.sh ***
ok 4 - git svn mkdirs recreates empty directories after git svn gc
# passed all 4 test(s)
1..4
*** t9155-git-svn-fetch-deleted-tag.sh ***
ok 14 - git svn gc-ed files work
# passed all 14 test(s)
1..14
*** t9156-git-svn-fetch-deleted-tag-2.sh ***
ok 1 - setup svn repo
ok 1 - setup svn repo
ok 1 - load svn repo
ok 2 - add red branch
ok 2 - fetch deleted tags from same revision with checksum error
# passed all 2 test(s)
1..2
ok 3 - add gre branch
*** t9157-git-svn-fetch-merge.sh ***
ok 2 - fetch deleted tags from same revision with no checksum error
# passed all 2 test(s)
1..2
*** t9158-git-svn-mergeinfo.sh ***
define NO_SVN_TESTS to skip git svn tests
ok 4 - add green branch
ok 1 - initialize source svn repo
ok 5 - add all branches
# passed all 5 test(s)
1..5
*** t9159-git-svn-no-parent-mergeinfo.sh ***
ok 1 - initialize source svn repo
ok 2 - clone svn repo
ok 3 - change svn:mergeinfo
ok 4 - verify svn:mergeinfo
ok 1 - load svn dump
ok 2 - all svn merges became git merge commits
ok 3 - cherry picks did not become git merge commits
ok 4 - svn non-merge merge commits did not become git merge commits
ok 5 - commit made to merged branch is reachable from the merge
ok 6 - merging two branches in one commit is detected correctly
ok 7 - everything got merged in the end # TODO known breakage vanished
# 1 known breakage(s) vanished; please update test(s)
# passed all remaining 6 test(s)
1..7
*** t9160-git-svn-preserve-empty-dirs.sh ***
ok 2 - clone svn repo
ok 3 - verify merge commit
# passed all 3 test(s)
1..3
*** t9161-git-svn-mergeinfo-push.sh ***
define NO_SVN_TESTS to skip git svn tests
ok 5 - change svn:mergeinfo multiline
ok 6 - verify svn:mergeinfo multiline
# passed all 6 test(s)
1..6
*** t9162-git-svn-dcommit-interactive.sh ***
ok 1 - test handling of root commits in merge ranges
# passed all 1 test(s)
1..1
*** t9163-git-svn-reset-clears-caches.sh ***
ok 1 - initialize source svn repo containing empty dirs
ok 1 - initialize repo
ok 1 - initialize source svn repo
ok 2 - clone svn repo with --preserve-empty-dirs
ok 3 - directory empty from inception
ok 4 - directory empty from subsequent svn commit
ok 5 - add entry to previously empty directory
ok 6 - remove non-last entry from directory
ok 2 - answers: y [\n] yes
ok 2 - fetch to merge-base (a)
ok 3 - answers: yes yes no
ok 7 - clone svn repo with --placeholder-file specified
ok 8 - placeholder namespace conflict with file
ok 9 - placeholder namespace conflict with directory
ok 4 - answers: yes quit
ok 1 - load svn dump
ok 10 - second set of svn commits and rebase
ok 11 - flag persistence during subsqeuent rebase
ok 12 - placeholder list persistence during subsqeuent rebase
# passed all 12 test(s)
1..12
*** t9164-git-svn-dcommit-concurrent.sh ***
ok 3 - rebase looses SVN merge (m)
ok 1 - setup svn repository
ok 2 - propagate merge information
ok 3 - check svn:mergeinfo
ok 2 - check if post-commit hook creates a concurrent commit
ok 5 - answers: all
# passed all 5 test(s)
1..5
*** t9165-git-svn-fetch-merge-branch-of-branch.sh ***
ok 3 - check if pre-commit hook fails
ok 4 - reset and fetch gets the SVN merge (m) correctly
# passed all 4 test(s)
1..4
*** t9166-git-svn-fetch-merge-branch-of-branch2.sh ***
ok 4 - merge another branch
ok 5 - check primary parent mergeinfo respected
ok 6 - merge existing merge
ok 7 - check both parents' mergeinfo respected
ok 4 - dcommit error handling
ok 1 - initialize source svn repo
ok 1 - initialize source svn repo
ok 8 - make further commits to branch
ok 9 - second forward merge
ok 10 - check new mergeinfo added
ok 2 - clone svn repo
ok 3 - verify merge commit
# passed all 3 test(s)
1..3
*** t9167-git-svn-cmd-branch-subproject.sh ***
ok 2 - clone svn repo
ok 3 - verify merge commit
# passed all 3 test(s)
1..3
*** t9200-git-cvsexportcommit.sh ***
ok 5 - dcommit concurrent change in non-changed file
ok 1 - initialize svnrepo
ok 11 - reintegration merge
ok 12 - check reintegration mergeinfo
ok 1 - New file
ok 2 - Remove two files, add two and update two
ok 3 - Fail to change binary more than one generation old
ok 2 - import into git
ok 4 - Remove only binary files
ok 13 - dcommit a merge at the top of a stack
# passed all 13 test(s)
1..13
*** t9300-fast-import.sh ***
ok 1 - empty stream succeeds
ok 2 - A: create pack from stdin
ok 3 - A: verify pack
ok 4 - A: verify commit
ok 5 - A: verify tree
ok 6 - A: verify file2
ok 7 - A: verify file3
ok 8 - A: verify file4
ok 9 - A: verify tag/series-A
ok 10 - A: verify tag/series-A-blob
ok 11 - A: verify marks output
ok 12 - A: verify marks import
ok 13 - A: tag blob by sha1
ok 14 - A: verify marks import does not crash
ok 15 - A: verify pack
ok 16 - A: verify diff
ok 5 - Remove only a text file
ok 17 - A: export marks with large values
ok 18 - B: fail on invalid blob sha1
ok 19 - B: fail on invalid branch name ".badbranchname"
ok 20 - B: fail on invalid branch name "bad[branch]name"
ok 21 - B: accept branch name "TEMP_TAG"
ok 22 - B: accept empty committer
ok 23 - B: accept and fixup committer with no name
ok 6 - New file with spaces in file name
ok 24 - B: fail on invalid committer (1)
ok 25 - B: fail on invalid committer (2)
ok 26 - B: fail on invalid committer (3)
ok 27 - B: fail on invalid committer (4)
ok 28 - B: fail on invalid committer (5)
ok 29 - C: incremental import create pack from stdin
ok 30 - C: verify pack
ok 31 - C: validate reuse existing blob
ok 32 - C: verify commit
ok 33 - C: validate rename result
ok 34 - D: inline data in commit
ok 35 - D: verify pack
ok 36 - D: validate new files added
ok 37 - D: verify file5
ok 38 - D: verify file6
ok 39 - E: rfc2822 date, --date-format=raw
ok 40 - E: rfc2822 date, --date-format=rfc2822
ok 41 - E: verify pack
ok 42 - E: verify commit
ok 43 - F: non-fast-forward update skips
ok 44 - F: verify pack
ok 45 - F: verify other commit
ok 46 - G: non-fast-forward update forced
ok 47 - G: verify pack
ok 7 - Update file with spaces in file name
ok 48 - G: branch changed, but logged
ok 49 - H: deletall, add 1
ok 50 - H: verify pack
ok 51 - H: validate old files removed, new files added
ok 52 - H: verify file
ok 53 - I: export-pack-edges
ok 54 - I: verify edge list
ok 55 - J: reset existing branch creates empty commit
ok 56 - J: branch has 1 commit, empty tree
ok 57 - J: tag must fail on empty branch
ok 6 - dcommit concurrent non-conflicting change
ok 58 - K: reinit branch with from
ok 59 - K: verify K^1 = branch^1
ok 60 - L: verify internal tree sorting
ok 61 - L: nested tree copy does not corrupt deltas
ok 62 - M: rename file in same subdirectory
ok 63 - M: rename file to new subdirectory
ok 64 - M: rename subdirectory to new subdirectory
ok 65 - M: rename root to subdirectory
ok 66 - N: copy file in same subdirectory
ok 67 - N: copy then modify subdirectory
ok 68 - N: copy dirty subdirectory
ok 8 - File with non-ascii file name
ok 69 - N: copy directory by id
ok 70 - N: read and copy directory
ok 71 - N: empty directory reads as missing
ok 72 - N: copy root directory by tree hash
ok 9 - Mismatching patch should fail
ok 73 - N: copy root by path
ok 74 - N: delete directory by copying
ok 75 - N: modify copied tree
ok 76 - N: reject foo/ syntax
ok 77 - N: reject foo/ syntax in copy source
ok 78 - N: reject foo/ syntax in rename source
ok 79 - N: reject foo/ syntax in ls argument
ok 80 - N: copy to root by id and modify
ok 81 - N: extract subtree
ok 82 - N: modify subtree, extract it, and modify again
ok 83 - O: comments are all skipped
ok 84 - O: blank lines not necessary after data commands
ok 85 - O: repack before next test
ok 10 - Retain execute bit
ok 86 - O: blank lines not necessary after other commands
ok 87 - O: progress outputs as requested by input
ok 88 - P: superproject & submodule mix
ok 89 - P: verbatim SHA gitlinks
ok 90 - P: fail on inline gitlink
ok 91 - P: fail on blob mark in gitlink
ok 11 - -w option should work with relative GIT_DIR
ok 92 - Q: commit notes
ok 93 - Q: verify pack
ok 94 - Q: verify first commit
ok 95 - Q: verify second commit
ok 96 - Q: verify third commit
ok 97 - Q: verify first notes commit
ok 98 - Q: verify first notes tree
ok 99 - Q: verify first note for first commit
ok 100 - Q: verify first note for second commit
ok 101 - Q: verify first note for third commit
ok 102 - Q: verify second notes commit
ok 103 - Q: verify second notes tree
ok 104 - Q: verify second note for first commit
ok 105 - Q: verify first note for second commit
ok 106 - Q: verify first note for third commit
ok 107 - Q: verify third notes commit
ok 108 - Q: verify third notes tree
ok 109 - Q: verify third note for first commit
ok 110 - Q: verify fourth notes commit
ok 111 - Q: verify fourth notes tree
ok 112 - Q: verify second note for second commit
ok 113 - Q: deny note on empty branch
ok 114 - R: abort on unsupported feature
ok 115 - R: supported feature is accepted
ok 116 - R: abort on receiving feature after data command
ok 117 - R: only one import-marks feature allowed per stream
ok 118 - R: export-marks feature results in a marks file being created
ok 119 - R: export-marks options can be overridden by commandline options
ok 120 - R: catch typo in marks file name
ok 121 - R: import and output marks can be the same file
ok 122 - R: --import-marks=foo --output-marks=foo to create foo fails
ok 123 - R: --import-marks-if-exists
ok 124 - R: feature import-marks-if-exists
ok 125 - R: import to output marks works without any content
ok 126 - R: import marks prefers commandline marks file over the stream
ok 127 - R: multiple --import-marks= should be honoured
ok 128 - R: feature relative-marks should be honoured
ok 129 - R: feature no-relative-marks should be honoured
ok 130 - R: feature ls supported
ok 131 - R: feature cat-blob supported
ok 132 - R: cat-blob-fd must be a nonnegative integer
ok 133 - R: print old blob
ok 134 - R: in-stream cat-blob-fd not respected
ok 135 - R: print new blob
ok 136 - R: print new blob by sha1
ok 137 - setup: big file
ok 138 - R: print two blobs to stdout
ok 139 - R: copy using cat-file
ok 140 - R: print blob mid-commit
ok 141 - R: print staged blob within commit
ok 142 - R: quiet option results in no stats being output
ok 143 - R: feature done means terminating "done" is mandatory
ok 144 - R: terminating "done" with trailing gibberish is ok
ok 145 - R: terminating "done" within commit
ok 146 - R: die on unknown option
ok 147 - R: unknown commandline options are rejected
ok 148 - R: die on invalid option argument
ok 149 - R: ignore non-git options
ok 12 - check files before directories
ok 150 - R: blob bigger than threshold
ok 151 - R: verify created pack
ok 152 - R: verify written objects
ok 153 - R: blob appears only once
ok 154 - S: initialize for S tests
ok 155 - S: filemodify with garbage after mark must fail
ok 156 - S: filemodify with garbage after inline must fail
ok 157 - S: filemodify with garbage after sha1 must fail
ok 158 - S: notemodify with garabge after mark dataref must fail
ok 159 - S: notemodify with garbage after inline dataref must fail
ok 160 - S: notemodify with garbage after sha1 dataref must fail
ok 161 - S: notemodify with garbarge after mark commit-ish must fail
ok 162 - S: from with garbage after mark must fail
ok 163 - S: merge with garbage after mark must fail
ok 164 - S: tag with garbage after mark must fail
ok 165 - S: cat-blob with garbage after mark must fail
ok 166 - S: ls with garbage after mark must fail
ok 167 - S: ls with garbage after sha1 must fail
ok 168 - T: ls root tree
ok 169 - T: delete branch
ok 170 - T: empty reset doesnt delete branch
ok 171 - U: initialize for U tests
ok 172 - U: filedelete file succeeds
ok 173 - U: validate file delete result
ok 7 - dcommit --no-rebase concurrent non-conflicting change
ok 174 - U: filedelete directory succeeds
ok 175 - U: validate directory delete result
ok 13 - re-commit a removed filename which remains in CVS attic
ok 176 - U: filedelete root succeeds
ok 177 - U: validate root delete result
# passed all 177 test(s)
1..177
*** t9301-fast-import-notes.sh ***
ok 1 - set up master branch
ok 2 - add notes with simple M command
ok 3 - add notes with simple N command
ok 4 - update existing notes with N command
ok 5 - add concatentation notes with M command
ok 6 - verify that deleteall also removes notes
ok 7 - verify that later N commands override earlier M commands
ok 14 - commit a file with leading spaces in the name
ok 15 - use the same checkout for Git and CVS
# passed all 15 test(s)
1..15
*** t9350-fast-export.sh ***
ok 1 - setup
ok 2 - fast-export | fast-import
ok 3 - fast-export master~2..master
ok 4 - iso-8859-1
ok 5 - import/export-marks
ok 6 - set up faked signed tag
ok 7 - signed-tags=abort
ok 8 - signed-tags=verbatim
ok 9 - signed-tags=strip
ok 10 - signed-tags=warn-strip
ok 11 - setup submodule
ok 12 - submodule fast-export | fast-import
ok 8 - add lots of commits and notes
ok 13 - setup copies
ok 14 - fast-export -C -C | fast-import
ok 15 - fast-export | fast-import when master is tagged
ok 16 - cope with tagger-less tags
ok 9 - verify that lots of notes trigger a fanout scheme
ok 10 - verify that non-notes are untouched by a fanout change
ok 17 - setup for limiting exports by PATH
ok 18 - dropping tag of filtered out object
ok 19 - rewriting tag of filtered out object
ok 3 - git svn branch tests
# passed all 3 test(s)
1..3
not ok 20 - no exact-ref revisions included # TODO known breakage
*** t9400-git-cvsserver-server.sh ***
ok 21 - path limiting with import-marks does not lose unmodified files
ok 11 - change a few existing notes
ok 22 - full-tree re-shows unmodified files
ok 23 - set-up a few more tags for tag export tests
ok 24 - tree_tag
ok 25 - tree_tag-obj
ok 26 - tag-obj_tag
ok 27 - tag-obj_tag-obj
ok 28 - directory becomes symlink
ok 12 - verify that changing notes respect existing fanout
ok 29 - fast-export quotes pathnames
ok 1 - setup
ok 30 - test bidirectionality
ok 31 - avoid uninteresting refs
ok 32 - refs are updated even if no commits need to be exported
ok 33 - use refspec
ok 34 - delete refspec
# still have 1 known breakage(s)
# passed all remaining 33 test(s)
1..34
*** t9401-git-cvsserver-crlf.sh ***
ok 1 - setup
ok 13 - remove lots of notes
ok 14 - verify that removing notes trigger fanout consolidation
ok 15 - verify that non-notes are untouched by a fanout change
ok 2 - basic checkout
ok 3 - pserver authentication
ok 16 - add notes to 16 commits in each of 10 refs
# passed all 16 test(s)
1..16
*** t9402-git-cvsserver-refs.sh ***
ok 2 - cvs co (default crlf)
ok 1 - setup v1, b1
ok 8 - dcommit fails on concurrent conflicting change
# passed all 8 test(s)
1..8
ok 4 - pserver authentication failure (non-anonymous user)
*** t9500-gitweb-standalone-no-errors.sh ***
ok 5 - pserver authentication success (non-anonymous user with password)
ok 3 - cvs co (allbinary)
ok 6 - pserver authentication (login)
ok 1 - no commits: projects_list (implicit)
ok 7 - pserver authentication failure (login/non-anonymous user)
ok 8 - req_Root failure (relative pathname)
ok 4 - cvs co (use attributes/allbinary)
ok 2 - no commits: projects_index
ok 2 - cvs co v1
ok 9 - req_Root failure (conflicting roots)
ok 10 - req_Root (strict paths)
ok 3 - no commits: .git summary (implicit)
ok 11 - req_Root failure (strict-paths)
ok 5 - cvs co (use attributes)
ok 3 - cvs co b1
ok 4 - no commits: .git commit (implicit HEAD)
ok 12 - req_Root (w/o strict-paths)
ok 13 - req_Root failure (w/o strict-paths)
ok 5 - no commits: .git commitdiff (implicit HEAD)
ok 14 - req_Root (base-path)
ok 4 - cvs co b1 [cvswork3]
ok 6 - no commits: .git tree (implicit HEAD)
ok 15 - req_Root failure (base-path)
ok 16 - req_Root (export-all)
ok 7 - no commits: .git heads
ok 17 - req_Root failure (export-all w/o whitelist)
ok 6 - adding files
ok 8 - no commits: .git tags
ok 9 - Make initial commit
ok 18 - req_Root (everything together)
ok 19 - gitcvs.enabled = false
ok 10 - projects_list (implicit)
ok 5 - edit cvswork3 and save diff
ok 6 - setup v1.2 on b1
ok 7 - updating
ok 11 - projects_index
ok 20 - gitcvs.ext.enabled = true
ok 7 - cvs -f up (on b1 adir)
ok 21 - gitcvs.ext.enabled = false
ok 12 - .git summary (implicit)
ok 8 - cvs co (use attributes/guess)
ok 9 - setup multi-line files
ok 13 - .git commit (implicit HEAD)
ok 8 - cvs up (on b1 /)
ok 14 - .git commitdiff (implicit HEAD, root commit)
ok 22 - gitcvs.dbname
ok 9 - cvs up (on b1 /) (again; check CVS/Tag files)
ok 10 - cvs co (guess)
ok 15 - .git commitdiff_plain (implicit HEAD, root commit)
ok 16 - .git commit (HEAD)
ok 10 - cvs up -r v1
ok 23 - gitcvs.ext.dbname
ok 11 - cvs co another copy (guess)
ok 17 - .git tree (implicit HEAD)
ok 11 - cvs up
ok 18 - .git blob (file)
ok 12 - cvs up (again; check CVS/Tag files)
ok 13 - setup simple b2
ok 19 - .git blob_plain (file)
ok 24 - cvs update (create new file)
ok 14 - cvs co b2 [into cvswork2]
ok 20 - .git commit (non-existent)
ok 25 - cvs update (update existing file)
ok 21 - .git commitdiff (non-existent)
not ok 26 - cvs update w/o -d doesn't create subdir (TODO) # TODO known breakage
ok 15 - root dir edit [cvswork2]
ok 22 - .git commitdiff (non-existent vs HEAD)
ok 23 - .git tree (0000000000000000000000000000000000000000)
ok 27 - cvs update (subdirectories)
ok 24 - .git tag (0000000000000000000000000000000000000000)
ok 28 - cvs update (delete file)
ok 25 - .git blob (non-existent)
ok 16 - root dir rm file [cvswork2]
ok 26 - .git blob_plain (non-existent)
ok 12 - cvs status - sticky options
ok 29 - cvs update (re-add deleted file)
ok 27 - commitdiff(0): root
ok 13 - add text (guess)
ok 28 - commitdiff(0): file added
ok 14 - add bin (guess)
ok 29 - commitdiff(0): mode change
ok 30 - cvs update (merge)
ok 30 - commitdiff(0): file renamed
ok 31 - commitdiff(0): file to symlink
ok 31 - cvs update (conflict merge)
ok 15 - remove files (guess)
ok 32 - commitdiff(0): file deleted
ok 32 - cvs update (-C)
ok 16 - cvs ci (guess)
ok 33 - commitdiff(0): file copied / new file
ok 17 - subdir edit/add/rm files [cvswork2]
ok 18 - validate result of edits [cvswork2]
ok 19 - validate basic diffs saved during above cvswork2 edits
ok 17 - update subdir of other copy (guess)
ok 20 - validate v1.2 diff saved during last cvswork2 edit
ok 21 - validate v1.2 v1 diff saved during last cvswork2 edit
ok 34 - commitdiff(0): mode change and modified
ok 33 - cvs update (merge no-op)
ok 22 - cvs up [cvswork2]
ok 35 - commitdiff(0): renamed and modified
ok 18 - update/merge full other copy (guess)
# passed all 18 test(s)
1..18
*** t9501-gitweb-standalone-http-status.sh ***
ok 36 - commitdiff(0): renamed, mode change and modified
ok 23 - cvs up -r b2 [back to cvswork]
ok 37 - setup typechange commits
ok 1 - setup
ok 38 - commitdiff(2): file renamed from foo to foo/baz
ok 39 - commitdiff(2): file renamed from foo/baz to foo
ok 24 - cvs up -r b1
ok 34 - cvs update (-p)
ok 40 - commitdiff(2): directory becomes file
ok 35 - cvs update (module list supports packed refs)
ok 2 - snapshots: tgz only default format enabled
ok 25 - cvs up -A
ok 41 - commitdiff(2): file becomes directory
ok 26 - cvs up (check CVS/Tag files)
ok 42 - commitdiff(2): file becomes symlink
ok 36 - cvs status
ok 43 - commitdiff(2): symlink becomes file
ok 37 - cvs status (nonrecursive)
ok 27 - cvs up -r heads/b1
ok 38 - cvs status (no subdirs in header)
ok 44 - commitdiff(2): symlink becomes directory
ok 39 - cvs co -c (shows module database)
ok 3 - snapshots: all enabled in default, use default disabled value
ok 45 - commitdiff(2): directory becomes symlink
ok 46 - setup incomplete lines
ok 28 - cvs up -r heads_-s-b2 (cvsserver escape mechanism)
ok 40 - cvs log
ok 4 - snapshots: zip explicitly disabled
ok 47 - commitdiff(1): addition of incomplete line
ok 41 - cvs annotate
# still have 1 known breakage(s)
# passed all remaining 40 test(s)
1..41
*** t9502-gitweb-standalone-parse-output.sh ***
ok 5 - snapshots: tgz explicitly enabled
ok 1 - setup
ok 29 - cvs up -r $(git rev-parse v1)
ok 48 - commitdiff(1): incomplete line as context line
ok 6 - snapshots: good tree-ish id
ok 2 - snapshot: full sha1
ok 30 - cvs diff -r v1 -u
ok 49 - commitdiff(1): change incomplete line
ok 7 - snapshots: bad tree-ish id
ok 3 - snapshot: shortened sha1
ok 50 - commitdiff(1): removal of incomplete line
ok 51 - Create a merge
ok 31 - cvs diff -N -r v2 -u
ok 8 - snapshots: bad tree-ish id (tagged object)
ok 4 - snapshot: almost full sha1
ok 52 - commit(0): merge commit
ok 9 - snapshots: good object id
ok 5 - snapshot: HEAD
ok 32 - cvs diff -N -r v2 -r v1.2
ok 33 - apply early [cvswork3] diff to b3
ok 53 - commitdiff(0): merge commit
ok 10 - snapshots: bad object id
ok 54 - Prepare large commit
ok 6 - snapshot: short branch name (master)
ok 34 - check [cvswork3] diff
ok 11 - modification: feed last-modified
ok 55 - commit(1): large commit
ok 35 - merge early [cvswork3] b3 with b1
ok 7 - snapshot: short tag name (first)
ok 12 - modification: feed if-modified-since (modified)
ok 56 - commitdiff(1): large commit
ok 8 - snapshot: full branch name (refs/heads/master)
ok 13 - modification: feed if-modified-since (unmodified)
ok 9 - snapshot: full tag name (refs/tags/first)
ok 57 - side-by-side: addition of incomplete line
ok 14 - modification: snapshot last-modified
ok 36 - cvs up dirty [cvswork3]
ok 10 - snapshot: hierarchical branch name (xx/test)
ok 11 - forks: setup
ok 58 - side-by-side: incomplete line as context line
ok 15 - modification: snapshot if-modified-since (modified)
ok 59 - side-by-side: changed incomplete line
ok 12 - forks: not skipped unless "forks" feature enabled
ok 16 - modification: snapshot if-modified-since (unmodified)
ok 37 - cvs commit [cvswork3]
# passed all 37 test(s)
1..37
*** t9600-cvsimport.sh ***
ok 1 - setup cvsroot environment
ok 2 - setup cvsroot
ok 60 - side-by-side: removal of incomplete line
ok 13 - forks: forks skipped if "forks" feature enabled
ok 17 - modification: tree snapshot
ok 3 - setup a cvs module
ok 61 - side-by-side: merge commit
ok 14 - forks: "forks" action for forked repository
ok 18 - load checking: load too high (default action)
ok 4 - import a trivial module
ok 5 - pack refs
ok 6 - initial import has correct .git/cvs-revisions
ok 19 - invalid arguments: invalid regexp (in project search)
# passed all 19 test(s)
1..19
*** t9601-cvsimport-vendor-branch.sh ***
ok 62 - tags: list of different types of tags
ok 7 - update cvs module
ok 15 - forks: can access forked repository
ok 8 - update git module
ok 9 - update has correct .git/cvs-revisions
ok 63 - tag: Tag to commit object
ok 16 - forks: project_index lists all projects (incl. forks)
ok 10 - update cvs module
ok 1 - import a module with a vendor branch
ok 64 - tag: on lightweight tag (invalid)
ok 11 - cvsimport.module config works
ok 12 - second update has correct .git/cvs-revisions
ok 2 - check HEAD out of cvs repository
ok 3 - check master out of git repository
ok 4 - check a file that was imported once
not ok 5 - check a file that was imported twice # TODO known breakage
ok 6 - check a file that was imported then modified on HEAD
ok 7 - check a file that was imported, modified, then imported again
ok 8 - check a file that was added to HEAD then imported
ok 9 - a vendor branch whose tag has been removed
# still have 1 known breakage(s)
# passed all remaining 8 test(s)
1..9
*** t9602-cvsimport-branches-tags.sh ***
ok 17 - xss checks
# passed all 17 test(s)
1..17
ok 65 - logs: log (implicit HEAD)
*** t9603-cvsimport-patchsets.sh ***
ok 13 - import from a CVS working tree
ok 14 - no .git/cvs-revisions created by default
ok 15 - test entire HEAD
# passed all 15 test(s)
1..15
*** t9604-cvsimport-timestamps.sh ***
ok 66 - logs: shortlog (implicit HEAD)
not ok 1 - import with criss cross times on revisions # TODO known breakage
# still have 1 known breakage(s)
1..1
*** t9700-perl-git.sh ***
ok 1 - set up test repository
# run 1: Perl API (perl /«PKGBUILDDIR»/t/t9700/test.pl)
ok 1 - import module
ok 2 - use Git;
ok 3 - open repository
ok 4 - config scalar: string
ok 5 - config array: string
ok 67 - logs: history (implicit HEAD, file)
ok 6 - config scalar: nonexistent
ok 7 - config array: nonexistent
ok 8 - config_int: integer
ok 9 - config_int: nonexistent
ok 10 - config_bool: true
ok 11 - config_bool: false
ok 12 - config_path: ~/foo expansion
ok 13 - config_path: multiple values
ok 14 - get_color
ok 15 - config: multivar
ok 16 - config_bool: non-boolean values fail
ok 17 - ident scalar: author (type)
ok 18 - ident scalar: committer (type)
ok 19 - ident scalar: invalid ident string (no parsing)
ok 20 - ident array: author
ok 21 - ident array: author
ok 22 - ident array: ident string
ok 23 - ident array: invalid ident string
ok 24 - ident_person: author (type)
ok 25 - ident_person: ident string
ok 26 - ident_person: array
ok 2 - test branch master
ok 27 - (get file hash)
ok 28 - cat_blob: size
ok 29 - cat_blob: data
ok 30 - hash_object: roundtrip
ok 31 - hash_and_insert_object: returns hash
ok 32 - cat_blob: roundtrip size
ok 33 - cat_blob: roundtrip data
ok 34 - repo_path
ok 35 - wc_path
ok 36 - wc_subdir initial
ok 37 - wc_subdir after wc_chdir
ok 38 - config after wc_chdir
ok 39 - repo_path (2)
ok 40 - wc_path (2)
ok 41 - wc_subdir initial (2)
ok 42 - rev-parse returned hash
ok 43 - log . does not show last commit
ok 44 - cat_blob(outside): size
1..44
# test_external test Perl API was ok
# test_external_without_stderr test no stderr: Perl API was ok
*** t9800-git-p4-basic.sh ***
1..0 # SKIP skipping git p4 tests; no p4 or p4d
*** t9801-git-p4-branch.sh ***
1..0 # SKIP skipping git p4 tests; no p4 or p4d
*** t9802-git-p4-filetype.sh ***
1..0 # SKIP skipping git p4 tests; no p4 or p4d
*** t9803-git-p4-shell-metachars.sh ***
1..0 # SKIP skipping git p4 tests; no p4 or p4d
*** t9804-git-p4-label.sh ***
ok 3 - test branch vendorbranch
1..0 # SKIP skipping git p4 tests; no p4 or p4d
*** t9805-git-p4-skip-submit-edit.sh ***
1..0 # SKIP skipping git p4 tests; no p4 or p4d
*** t9806-git-p4-options.sh ***
1..0 # SKIP skipping git p4 tests; no p4 or p4d
*** t9807-git-p4-submit.sh ***
1..0 # SKIP skipping git p4 tests; no p4 or p4d
*** t9808-git-p4-chdir.sh ***
1..0 # SKIP skipping git p4 tests; no p4 or p4d
*** t9809-git-p4-client-view.sh ***
1..0 # SKIP skipping git p4 tests; no p4 or p4d
*** t9810-git-p4-rcs.sh ***
1..0 # SKIP skipping git p4 tests; no p4 or p4d
*** t9811-git-p4-label-import.sh ***
ok 68 - logs: history (implicit HEAD, non-existent file)
not ok 4 - test branch B_FROM_INITIALS # TODO known breakage
1..0 # SKIP skipping git p4 tests; no p4 or p4d
*** t9812-git-p4-wildcards.sh ***
1..0 # SKIP skipping git p4 tests; no p4 or p4d
*** t9813-git-p4-preserve-users.sh ***
1..0 # SKIP skipping git p4 tests; no p4 or p4d
*** t9814-git-p4-rename.sh ***
1..0 # SKIP skipping git p4 tests; no p4 or p4d
*** t9815-git-p4-submit-fail.sh ***
1..0 # SKIP skipping git p4 tests; no p4 or p4d
*** t9816-git-p4-locked.sh ***
1..0 # SKIP skipping git p4 tests; no p4 or p4d
*** t9901-git-web--browse.sh ***
ok 1 - URL with an ampersand in it
ok 2 - URL with a semi-colon in it
not ok 5 - test branch B_FROM_INITIALS_BUT_ONE # TODO known breakage
ok 3 - URL with a hash in it
ok 4 - browser paths are properly quoted
ok 5 - browser command allows arbitrary shell code
# passed all 5 test(s)
1..5
*** t9902-completion.sh ***
ok 1 - check timestamps are UTC (TZ=CST6CDT)
ok 1 - setup for __gitdir tests
ok 2 - __gitdir - from command line (through $__git_dir)
ok 3 - __gitdir - repo as argument
ok 4 - __gitdir - remote as argument
ok 5 - __gitdir - .git directory in cwd
ok 6 - __gitdir - .git directory in parent
ok 7 - __gitdir - cwd is a .git directory
ok 8 - __gitdir - parent is a .git directory
ok 69 - logs: history (implicit HEAD, deleted file)
ok 9 - __gitdir - $GIT_DIR set while .git directory in cwd
ok 10 - __gitdir - $GIT_DIR set while .git directory in parent
ok 11 - __gitdir - non-existing $GIT_DIR
ok 12 - __gitdir - gitfile in cwd
not ok 6 - test branch B_MIXED # TODO known breakage
ok 13 - __gitdir - gitfile in parent
ok 14 - __gitdir - resulting path avoids symlinks
ok 15 - __gitdir - not a git repository
ok 16 - __gitcomp - trailing space - options
ok 17 - __gitcomp - trailing space - config keys
ok 18 - __gitcomp - option parameter
ok 19 - __gitcomp - prefix
ok 20 - __gitcomp - suffix
ok 21 - __gitcomp - doesnt fail because of invalid variable name
ok 22 - __gitcomp_nl - trailing space
ok 23 - __gitcomp_nl - prefix
ok 24 - __gitcomp_nl - suffix
ok 25 - __gitcomp_nl - no suffix
ok 26 - __gitcomp_nl - doesnt fail because of invalid variable name
ok 27 - basic
ok 28 - double dash "git" itself
ok 29 - double dash "git checkout"
ok 30 - general options
ok 7 - test branch B_SPLIT
ok 31 - general options plus command
ok 32 - git --help completion
ok 33 - setup for ref completion
ok 34 - checkout completes ref names
not ok 8 - test tag vendortag # TODO known breakage
ok 35 - show completes all refs
ok 36 - <ref>: completes paths
ok 37 - complete tree filename with spaces
ok 38 - complete tree filename with metacharacters
ok 70 - path_info: project
ok 39 - send-email
ok 9 - test tag T_ALL_INITIAL_FILES
not ok 10 - test tag T_ALL_INITIAL_FILES_BUT_ONE # TODO known breakage
ok 2 - check timestamps with author-specific timezones
# passed all 2 test(s)
1..2
ok 40 - complete files
*** t9903-bash-prompt.sh ***
ok 41 - completion uses <cmd> completion for alias: !sh -c 'git <cmd> ...'
ok 42 - completion uses <cmd> completion for alias: !f () { VAR=val git <cmd> ... }
ok 43 - completion used <cmd> completion for alias: !f() { : git <cmd> ; ... }
ok 71 - path_info: project/branch
not ok 44 - complete with tilde expansion # TODO known breakage
# still have 1 known breakage(s)
# passed all remaining 43 test(s)
1..44
ok 1 - setup for prompt tests
ok 2 - prompt - branch name
ok 3 - prompt - branch name - symlink symref
not ok 11 - test tag T_MIXED # TODO known breakage
# still have 6 known breakage(s)
# passed all remaining 5 test(s)
1..11
ok 4 - prompt - unborn branch
ok 5 - prompt - with newline in path
ok 6 - prompt - detached head
ok 7 - prompt - describe detached head - contains
ok 8 - prompt - describe detached head - branch
ok 9 - prompt - describe detached head - describe
ok 10 - prompt - describe detached head - default
ok 11 - prompt - inside .git directory
ok 12 - prompt - deep inside .git directory
ok 13 - prompt - inside bare repository
ok 72 - path_info: project/branch:file
ok 14 - prompt - interactive rebase
ok 15 - prompt - rebase merge
ok 73 - path_info: project/branch:dir/
ok 16 - prompt - rebase
ok 17 - prompt - merge
ok 18 - prompt - cherry-pick
ok 19 - prompt - bisect
ok 20 - prompt - dirty status indicator - clean
ok 21 - prompt - dirty status indicator - dirty worktree
ok 22 - prompt - dirty status indicator - dirty index
ok 23 - prompt - dirty status indicator - dirty index and worktree
ok 24 - prompt - dirty status indicator - before root commit
ok 74 - path_info: project/branch (non-existent)
ok 25 - prompt - dirty status indicator - shell variable unset with config disabled
ok 26 - prompt - dirty status indicator - shell variable unset with config enabled
ok 27 - prompt - dirty status indicator - shell variable set with config disabled
ok 28 - prompt - dirty status indicator - shell variable set with config enabled
ok 29 - prompt - dirty status indicator - not shown inside .git directory
ok 30 - prompt - stash status indicator - no stash
ok 31 - prompt - stash status indicator - stash
ok 75 - path_info: project/branch:filename (non-existent branch)
ok 32 - prompt - stash status indicator - not shown inside .git directory
ok 33 - prompt - untracked files status indicator - no untracked files
ok 34 - prompt - untracked files status indicator - untracked files
ok 35 - prompt - untracked files status indicator - shell variable unset with config disabled
ok 36 - prompt - untracked files status indicator - shell variable unset with config enabled
ok 37 - prompt - untracked files status indicator - shell variable set with config disabled
ok 38 - prompt - untracked files status indicator - shell variable set with config enabled
ok 39 - prompt - untracked files status indicator - not shown inside .git directory
ok 40 - prompt - format string starting with dash
ok 41 - prompt - pc mode
ok 42 - prompt - bash color pc mode - branch name
ok 43 - prompt - bash color pc mode - detached head
ok 44 - prompt - bash color pc mode - dirty status indicator - dirty worktree
ok 45 - prompt - bash color pc mode - dirty status indicator - dirty index
ok 46 - prompt - bash color pc mode - dirty status indicator - dirty index and worktree
ok 47 - prompt - bash color pc mode - dirty status indicator - before root commit
ok 48 - prompt - bash color pc mode - inside .git directory
ok 76 - path_info: project/branch:file (non-existent)
ok 49 - prompt - bash color pc mode - stash status indicator
ok 50 - prompt - bash color pc mode - untracked files status indicator
ok 51 - prompt - zsh color pc mode
# passed all 51 test(s)
1..51
ok 77 - path_info: project/branch:dir/ (non-existent)
ok 78 - path_info: project/branch:/file
ok 79 - path_info: project/:/file (implicit HEAD)
ok 80 - path_info: project/:/ (implicit HEAD, top tree)
ok 81 - feeds: OPML
ok 82 - feed: RSS
ok 83 - feed: Atom
ok 84 - encode(commit): utf8
ok 85 - encode(commit): iso-8859-1
ok 86 - encode(log): utf-8 and iso-8859-1
ok 87 - opt: log --no-merges
ok 88 - opt: atom --no-merges
ok 89 - opt: "file" history --no-merges
ok 90 - opt: log --no-such-option (invalid option)
ok 91 - opt: tree --no-merges (invalid option for action)
ok 92 - URL: no project URLs, no base URL
ok 93 - URL: project URLs via gitweb.url
ok 94 - URL: project URLs via cloneurl file
ok 95 - config override: projects list (implicit)
ok 96 - config override: tree view, features not overridden in repo config
ok 97 - config override: tree view, features disabled in repo config
ok 98 - config override: tree view, features enabled in repo config (1)
ok 99 - config override: tree view, features enabled in repo config (2)
ok 100 - search: preparation
ok 101 - search: commit author
ok 102 - search: commit message
ok 103 - search: grep
ok 104 - search: pickaxe
ok 105 - search: projects
ok 106 - README.html with non-ASCII characters (utf-8)
Skipping syntax highlighting tests: 'highlight' not found
ok 107 # skip syntax highlighting (no highlight, unknown syntax) (missing HIGHLIGHT)
ok 108 # skip syntax highlighting (highlighted, shell script) (missing HIGHLIGHT)
ok 109 - forks: prepare
ok 110 - forks: projects list
ok 111 - forks: forks action
ok 112 - ctags: tag cloud in projects list
ok 113 - ctags: search projects by existing tag
ok 114 - ctags: search projects by non existent tag
ok 115 - ctags: malformed tag weights
ok 116 - categories: projects list, only default category
ok 117 - unborn HEAD: "summary" page (with "heads" subview)
# passed all 117 test(s)
1..117
/usr/bin/make aggregate-results
make[4]: Entering directory '/«PKGBUILDDIR»/t'
for f in 'test-results'/t*-*.counts; do \
echo "$f"; \
done | '/bin/sh' ./aggregate-results.sh
fixed 1
success 12049
failed 0
broken 186
total 12297
make[4]: Leaving directory '/«PKGBUILDDIR»/t'
/usr/bin/make clean
make[4]: Entering directory '/«PKGBUILDDIR»/t'
rm -f -r 'trash directory'.* 'test-results'
rm -f -r valgrind/bin
rm -f .prove
make[4]: Leaving directory '/«PKGBUILDDIR»/t'
make[3]: Leaving directory '/«PKGBUILDDIR»/t'
make[2]: Leaving directory '/«PKGBUILDDIR»/t'
make[1]: Leaving directory '/«PKGBUILDDIR»'
test -z 'test' || \
DESTDIR='/«PKGBUILDDIR»/debian/git' /usr/bin/make -C contrib/subtree test NO_OPENSSL=1 prefix=/usr gitexecdir=/usr/lib/git-core libexecdir=/usr/lib/git-core mandir=/usr/share/man htmldir=/usr/share/doc/git/html INSTALLDIRS=vendor USE_SRV_RR=1 USE_LIBPCRE=1 SANE_TOOL_PATH= INSTALL=install TAR=tar NO_CROSS_DIRECTORY_HARDLINKS=1 NO_INSTALL_HARDLINKS=1 DEFAULT_PAGER=pager DEFAULT_EDITOR=editor CC='gcc' CFLAGS='-Wall -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2' LDFLAGS='-Wl,-z,relro' || \
GIT_TEST_OPTS=--verbose DESTDIR='/«PKGBUILDDIR»/debian/git' /usr/bin/make -C contrib/subtree test NO_OPENSSL=1 prefix=/usr gitexecdir=/usr/lib/git-core libexecdir=/usr/lib/git-core mandir=/usr/share/man htmldir=/usr/share/doc/git/html INSTALLDIRS=vendor USE_SRV_RR=1 USE_LIBPCRE=1 SANE_TOOL_PATH= INSTALL=install TAR=tar NO_CROSS_DIRECTORY_HARDLINKS=1 NO_INSTALL_HARDLINKS=1 DEFAULT_PAGER=pager DEFAULT_EDITOR=editor CC='gcc' CFLAGS='-Wall -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2' LDFLAGS='-Wl,-z,relro'
make[1]: Entering directory '/«PKGBUILDDIR»/contrib/subtree'
/usr/bin/make -C ../../ GIT-VERSION-FILE
make[2]: Entering directory '/«PKGBUILDDIR»'
make[2]: 'GIT-VERSION-FILE' is up to date.
make[2]: Leaving directory '/«PKGBUILDDIR»'
/usr/bin/make -C t/ test
make[2]: Entering directory '/«PKGBUILDDIR»/contrib/subtree/t'
rm -f -r test-results
/usr/bin/make aggregate-results-and-cleanup
make[3]: Entering directory '/«PKGBUILDDIR»/contrib/subtree/t'
*** t7900-subtree.sh ***
ok 1 - init subproj
ok 2 - add sub1
ok 3 - add sub2
ok 4 - add sub3
ok 5 - add main4
ok 6 - fetch subproj history
ok 7 - no subtree exists in main tree
ok 8 - no pull from non-existant subtree
ok 9 - check if --message works for add
ok 10 - check if --message works as -m and --prefix as -P
ok 11 - check if --message works with squash too
ok 12 - add subproj to mainline
ok 13 - merge fetched subproj
ok 14 - add main-sub5
ok 15 - add main6
ok 16 - add main-sub7
ok 17 - fetch new subproj history
ok 18 - check if --message works for merge
ok 19 - check if --message for merge works with squash too
ok 20 - merge new subproj history into subdir
ok 21 - Check that prefix argument is required for split
ok 22 - Check that the <prefix> exists for a split
ok 23 - check if --message works for split+rejoin
ok 24 - check split with --branch
ok 25 - check hash of split
ok 26 - check split with --branch for an existing branch
ok 27 - check split with --branch for an incompatible branch
ok 28 - check split+rejoin
ok 29 - add main-sub8
ok 30 - merge split into subproj
ok 31 - add sub9
ok 32 - split for sub8
ok 33 - add main-sub10
ok 34 - split for sub10
ok 35 - merge split into subproj
ok 36 - make sure exactly the right set of files ends up in the subproj
ok 37 - make sure the subproj history *only* contains commits that affect the subdir
ok 38 - pull from subproj
ok 39 - make sure exactly the right set of files ends up in the mainline
ok 40 - make sure each filename changed exactly once in the entire history
ok 41 - make sure the --rejoin commits never make it into subproj
ok 42 - make sure no "git subtree" tagged commits make it into subproj
ok 43 - init main
ok 44 - add main1
ok 45 - init sub
ok 46 - add sub2
ok 47 - add sub as subdir in main
ok 48 - add sub3
ok 49 - merge from sub
ok 50 - add main-sub4
ok 51 - split for main-sub4 without --onto
ok 52 - check that the commit parent is sub3
ok 53 - add main-sub5
ok 54 - split for main-sub5 without --onto
ok 55 - verify one file change per commit
# passed all 55 test(s)
1..55
/usr/bin/make aggregate-results
make[4]: Entering directory '/«PKGBUILDDIR»/contrib/subtree/t'
for f in ../../../t/test-results/t*-*.counts; do \
echo "$f"; \
done | '/bin/sh' ../../../t/aggregate-results.sh
fixed 0
success 55
failed 0
broken 0
total 55
make[4]: Leaving directory '/«PKGBUILDDIR»/contrib/subtree/t'
/usr/bin/make clean
make[4]: Entering directory '/«PKGBUILDDIR»/contrib/subtree/t'
rm -f -r 'trash directory'.* test-results
rm -f -r valgrind/bin
rm -f .prove
make[4]: Leaving directory '/«PKGBUILDDIR»/contrib/subtree/t'
make[3]: Leaving directory '/«PKGBUILDDIR»/contrib/subtree/t'
make[2]: Leaving directory '/«PKGBUILDDIR»/contrib/subtree/t'
make[1]: Leaving directory '/«PKGBUILDDIR»/contrib/subtree'
touch build-arch-stamp
fakeroot debian/rules binary-arch
# git
rm -rf '/«PKGBUILDDIR»/debian/git'
install -d -m0755 '/«PKGBUILDDIR»/debian/git'/usr/bin
DESTDIR='/«PKGBUILDDIR»/debian/git' /usr/bin/make install NO_OPENSSL=1 prefix=/usr gitexecdir=/usr/lib/git-core libexecdir=/usr/lib/git-core mandir=/usr/share/man htmldir=/usr/share/doc/git/html INSTALLDIRS=vendor USE_SRV_RR=1 USE_LIBPCRE=1 SANE_TOOL_PATH= INSTALL=install TAR=tar NO_CROSS_DIRECTORY_HARDLINKS=1 NO_INSTALL_HARDLINKS=1 DEFAULT_PAGER=pager DEFAULT_EDITOR=editor CC='gcc' CFLAGS='-Wall -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2' LDFLAGS='-Wl,-z,relro'
make[1]: Entering directory '/«PKGBUILDDIR»'
GEN perl/PM.stamp
make[2]: Entering directory '/«PKGBUILDDIR»/gitweb'
make[3]: Entering directory '/«PKGBUILDDIR»'
make[3]: 'GIT-VERSION-FILE' is up to date.
make[3]: Leaving directory '/«PKGBUILDDIR»'
make[2]: Leaving directory '/«PKGBUILDDIR»/gitweb'
GEN git-instaweb
make[2]: Entering directory '/«PKGBUILDDIR»/git-gui'
make[2]: Leaving directory '/«PKGBUILDDIR»/git-gui'
make[2]: Entering directory '/«PKGBUILDDIR»/gitk-git'
make[2]: Leaving directory '/«PKGBUILDDIR»/gitk-git'
make[2]: Entering directory '/«PKGBUILDDIR»/perl'
make[3]: Entering directory '/«PKGBUILDDIR»/perl'
make[3]: Leaving directory '/«PKGBUILDDIR»/perl'
make[2]: Leaving directory '/«PKGBUILDDIR»/perl'
make[2]: Entering directory '/«PKGBUILDDIR»/templates'
make[2]: Leaving directory '/«PKGBUILDDIR»/templates'
install -d -m 755 '/«PKGBUILDDIR»/debian/git/usr/bin'
install -d -m 755 '/«PKGBUILDDIR»/debian/git/usr/lib/git-core'
install git-credential-store git-daemon git-fast-import git-http-backend git-imap-send git-sh-i18n--envsubst git-shell git-show-index git-upload-pack git-remote-testsvn git-http-fetch git-http-push git-credential-cache git-credential-cache--daemon git-remote-http git-remote-https git-remote-ftp git-remote-ftps git-am git-bisect git-difftool--helper git-filter-branch git-merge-octopus git-merge-one-file git-merge-resolve git-mergetool git-pull git-quiltimport git-rebase git-request-pull git-stash git-submodule git-web--browse git-add--interactive git-difftool git-archimport git-cvsexportcommit git-cvsimport git-cvsserver git-relink git-send-email git-svn git-p4 git-instaweb '/«PKGBUILDDIR»/debian/git/usr/lib/git-core'
install -m 644 git-mergetool--lib git-parse-remote git-rebase--am git-rebase--interactive git-rebase--merge git-sh-setup git-sh-i18n '/«PKGBUILDDIR»/debian/git/usr/lib/git-core'
install git git-upload-pack git-receive-pack git-upload-archive git-shell git-cvsserver '/«PKGBUILDDIR»/debian/git/usr/bin'
/usr/bin/make -C templates DESTDIR='/«PKGBUILDDIR»/debian/git' install
make[2]: Entering directory '/«PKGBUILDDIR»/templates'
install -d -m 755 '/«PKGBUILDDIR»/debian/git/usr/share/git-core/templates'
(cd blt && tar cf - .) | \
(cd '/«PKGBUILDDIR»/debian/git/usr/share/git-core/templates' && umask 022 && tar xof -)
make[2]: Leaving directory '/«PKGBUILDDIR»/templates'
install -d -m 755 '/«PKGBUILDDIR»/debian/git/usr/lib/git-core/mergetools'
install -m 644 mergetools/* '/«PKGBUILDDIR»/debian/git/usr/lib/git-core/mergetools'
install -d -m 755 '/«PKGBUILDDIR»/debian/git/usr/share/locale'
(cd po/build/locale && tar cf - .) | \
(cd '/«PKGBUILDDIR»/debian/git/usr/share/locale' && umask 022 && tar xof -)
/usr/bin/make -C perl prefix='/usr' DESTDIR='/«PKGBUILDDIR»/debian/git' install
make[2]: Entering directory '/«PKGBUILDDIR»/perl'
make[3]: Entering directory '/«PKGBUILDDIR»/perl'
Installing /«PKGBUILDDIR»/debian/git/usr/share/perl5/Error.pm
Installing /«PKGBUILDDIR»/debian/git/usr/share/perl5/Git.pm
Installing /«PKGBUILDDIR»/debian/git/usr/share/perl5/Git/SVN.pm
Installing /«PKGBUILDDIR»/debian/git/usr/share/perl5/Git/I18N.pm
Installing /«PKGBUILDDIR»/debian/git/usr/share/perl5/Git/IndexInfo.pm
Installing /«PKGBUILDDIR»/debian/git/usr/share/perl5/Git/SVN/GlobSpec.pm
Installing /«PKGBUILDDIR»/debian/git/usr/share/perl5/Git/SVN/Utils.pm
Installing /«PKGBUILDDIR»/debian/git/usr/share/perl5/Git/SVN/Ra.pm
Installing /«PKGBUILDDIR»/debian/git/usr/share/perl5/Git/SVN/Editor.pm
Installing /«PKGBUILDDIR»/debian/git/usr/share/perl5/Git/SVN/Migration.pm
Installing /«PKGBUILDDIR»/debian/git/usr/share/perl5/Git/SVN/Fetcher.pm
Installing /«PKGBUILDDIR»/debian/git/usr/share/perl5/Git/SVN/Prompt.pm
Installing /«PKGBUILDDIR»/debian/git/usr/share/perl5/Git/SVN/Log.pm
Installing /«PKGBUILDDIR»/debian/git/usr/share/perl5/Git/SVN/Memoize/YAML.pm
Installing /«PKGBUILDDIR»/debian/git/usr/share/man/man3/Git.3pm
Installing /«PKGBUILDDIR»/debian/git/usr/share/man/man3/Git::I18N.3pm
Installing /«PKGBUILDDIR»/debian/git/usr/share/man/man3/Git::SVN::Editor.3pm
Installing /«PKGBUILDDIR»/debian/git/usr/share/man/man3/Git::SVN::Fetcher.3pm
Installing /«PKGBUILDDIR»/debian/git/usr/share/man/man3/Git::SVN::Memoize::YAML.3pm
Installing /«PKGBUILDDIR»/debian/git/usr/share/man/man3/Git::SVN::Prompt.3pm
Installing /«PKGBUILDDIR»/debian/git/usr/share/man/man3/Git::SVN::Ra.3pm
Installing /«PKGBUILDDIR»/debian/git/usr/share/man/man3/Git::SVN::Utils.3pm
Installing /«PKGBUILDDIR»/debian/git/usr/share/man/man3/private-Error.3pm
make[3]: Leaving directory '/«PKGBUILDDIR»/perl'
make[2]: Leaving directory '/«PKGBUILDDIR»/perl'
/usr/bin/make -C gitweb install
make[2]: Entering directory '/«PKGBUILDDIR»/gitweb'
make[3]: Entering directory '/«PKGBUILDDIR»'
make[3]: 'GIT-VERSION-FILE' is up to date.
make[3]: Leaving directory '/«PKGBUILDDIR»'
install -d -m 755 '/«PKGBUILDDIR»/debian/git/usr/share/gitweb'
install -m 755 gitweb.cgi '/«PKGBUILDDIR»/debian/git/usr/share/gitweb'
install -d -m 755 '/«PKGBUILDDIR»/debian/git/usr/share/gitweb/static'
install -m 644 static/gitweb.js static/gitweb.css static/git-logo.png static/git-favicon.png '/«PKGBUILDDIR»/debian/git/usr/share/gitweb/static'
make[2]: Leaving directory '/«PKGBUILDDIR»/gitweb'
/usr/bin/make -C gitk-git install
make[2]: Entering directory '/«PKGBUILDDIR»/gitk-git'
install -m 755 gitk-wish '/«PKGBUILDDIR»/debian/git/usr/bin'/gitk
install -d -m 755 '/«PKGBUILDDIR»/debian/git/usr/share/gitk/lib/msgs'
install -m 644 po/ru.msg '/«PKGBUILDDIR»/debian/git/usr/share/gitk/lib/msgs' && install -m 644 po/es.msg '/«PKGBUILDDIR»/debian/git/usr/share/gitk/lib/msgs' && install -m 644 po/pt_br.msg '/«PKGBUILDDIR»/debian/git/usr/share/gitk/lib/msgs' && install -m 644 po/bg.msg '/«PKGBUILDDIR»/debian/git/usr/share/gitk/lib/msgs' && install -m 644 po/ja.msg '/«PKGBUILDDIR»/debian/git/usr/share/gitk/lib/msgs' && install -m 644 po/hu.msg '/«PKGBUILDDIR»/debian/git/usr/share/gitk/lib/msgs' && install -m 644 po/sv.msg '/«PKGBUILDDIR»/debian/git/usr/share/gitk/lib/msgs' && install -m 644 po/fr.msg '/«PKGBUILDDIR»/debian/git/usr/share/gitk/lib/msgs' && install -m 644 po/de.msg '/«PKGBUILDDIR»/debian/git/usr/share/gitk/lib/msgs' && install -m 644 po/vi.msg '/«PKGBUILDDIR»/debian/git/usr/share/gitk/lib/msgs' && install -m 644 po/it.msg '/«PKGBUILDDIR»/debian/git/usr/share/gitk/lib/msgs' && true
make[2]: Leaving directory '/«PKGBUILDDIR»/gitk-git'
/usr/bin/make -C git-gui gitexecdir='/usr/lib/git-core' install
make[2]: Entering directory '/«PKGBUILDDIR»/git-gui'
DEST /«PKGBUILDDIR»/debian/git/usr/lib/git-core
INSTALL 755 git-gui
INSTALL 755 git-gui--askpass
LINK git-citool -> git-gui
DEST /«PKGBUILDDIR»/debian/git/usr/share/git-gui/lib
INSTALL 644 tclIndex
INSTALL 644 themed.tcl
INSTALL 644 line.tcl
INSTALL 644 console.tcl
INSTALL 644 checkout_op.tcl
INSTALL 644 transport.tcl
INSTALL 644 remote_add.tcl
INSTALL 644 browser.tcl
INSTALL 644 tools.tcl
INSTALL 644 branch_checkout.tcl
INSTALL 644 spellcheck.tcl
INSTALL 644 status_bar.tcl
INSTALL 644 diff.tcl
INSTALL 644 remote.tcl
INSTALL 644 choose_font.tcl
INSTALL 644 option.tcl
INSTALL 644 mergetool.tcl
INSTALL 644 tools_dlg.tcl
INSTALL 644 search.tcl
INSTALL 644 shortcut.tcl
INSTALL 644 branch_rename.tcl
INSTALL 644 class.tcl
INSTALL 644 remote_branch_delete.tcl
INSTALL 644 choose_repository.tcl
INSTALL 644 about.tcl
INSTALL 644 blame.tcl
INSTALL 644 branch.tcl
INSTALL 644 win32.tcl
INSTALL 644 sshkey.tcl
INSTALL 644 branch_create.tcl
INSTALL 644 commit.tcl
INSTALL 644 branch_delete.tcl
INSTALL 644 index.tcl
INSTALL 644 encoding.tcl
INSTALL 644 logo.tcl
INSTALL 644 date.tcl
INSTALL 644 choose_rev.tcl
INSTALL 644 database.tcl
INSTALL 644 error.tcl
INSTALL 644 merge.tcl
INSTALL 644 git-gui.ico
INSTALL 644 win32_shortcut.js
DEST /«PKGBUILDDIR»/debian/git/usr/share/git-gui/lib/msgs
INSTALL 644 pt_br.msg
INSTALL 644 hu.msg
INSTALL 644 zh_cn.msg
INSTALL 644 de.msg
INSTALL 644 sv.msg
INSTALL 644 it.msg
INSTALL 644 ja.msg
INSTALL 644 ru.msg
INSTALL 644 fr.msg
INSTALL 644 el.msg
INSTALL 644 bg.msg
INSTALL 644 nb.msg
make[2]: Leaving directory '/«PKGBUILDDIR»/git-gui'
bindir=$(cd '/«PKGBUILDDIR»/debian/git/usr/bin' && pwd) && \
execdir=$(cd '/«PKGBUILDDIR»/debian/git/usr/lib/git-core' && pwd) && \
{ test "$bindir/" = "$execdir/" || \
for p in git git-shell git-upload-pack git-cvsserver; do \
rm -f "$execdir/$p" && \
test -z "11" && \
ln "$bindir/$p" "$execdir/$p" 2>/dev/null || \
cp "$bindir/$p" "$execdir/$p" || exit; \
done; \
} && \
for p in git-receive-pack git-upload-archive; do \
rm -f "$bindir/$p" && \
test -z "1" && \
ln "$bindir/git" "$bindir/$p" 2>/dev/null || \
ln -s "git" "$bindir/$p" 2>/dev/null || \
cp "$bindir/git" "$bindir/$p" || exit; \
done && \
for p in git-add git-annotate git-apply git-archive git-bisect--helper git-blame git-branch git-bundle git-cat-file git-check-attr git-check-ignore git-check-mailmap git-check-ref-format git-checkout-index git-checkout git-clean git-clone git-column git-commit-tree git-commit git-config git-count-objects git-credential git-describe git-diff-files git-diff-index git-diff-tree git-diff git-fast-export git-fetch-pack git-fetch git-fmt-merge-msg git-for-each-ref git-fsck git-gc git-get-tar-commit-id git-grep git-hash-object git-help git-index-pack git-init-db git-log git-ls-files git-ls-remote git-ls-tree git-mailinfo git-mailsplit git-merge git-merge-base git-merge-file git-merge-index git-merge-ours git-merge-recursive git-merge-tree git-mktag git-mktree git-mv git-name-rev git-notes git-pack-objects git-pack-redundant git-pack-refs git-patch-id git-prune-packed git-prune git-push git-read-tree git-receive-pack git-reflog git-remote git-remote-ext git-remote-fd git-repack git-replace git-rerere git-reset git-rev-list git-rev-parse git-revert git-rm git-send-pack git-shortlog git-show-branch git-show-ref git-stripspace git-symbolic-ref git-tag git-unpack-file git-unpack-objects git-update-index git-update-ref git-update-server-info git-upload-archive git-var git-verify-commit git-verify-pack git-verify-tag git-write-tree git-cherry git-cherry-pick git-format-patch git-fsck-objects git-init git-merge-subtree git-show git-stage git-status git-whatchanged; do \
rm -f "$execdir/$p" && \
test -z "1" && \
ln "$execdir/git" "$execdir/$p" 2>/dev/null || \
ln -s "git" "$execdir/$p" 2>/dev/null || \
cp "$execdir/git" "$execdir/$p" || exit; \
done && \
remote_curl_aliases="git-remote-https git-remote-ftp git-remote-ftps" && \
for p in $remote_curl_aliases; do \
rm -f "$execdir/$p" && \
test -z "1" && \
ln "$execdir/git-remote-http" "$execdir/$p" 2>/dev/null || \
ln -s "git-remote-http" "$execdir/$p" 2>/dev/null || \
cp "$execdir/git-remote-http" "$execdir/$p" || exit; \
done && \
./check_bindir "z$bindir" "z$execdir" "$bindir/git-add"
make[1]: Leaving directory '/«PKGBUILDDIR»'
DESTDIR='/«PKGBUILDDIR»/debian/git' /usr/bin/make -C contrib/subtree install NO_OPENSSL=1 prefix=/usr gitexecdir=/usr/lib/git-core libexecdir=/usr/lib/git-core mandir=/usr/share/man htmldir=/usr/share/doc/git/html INSTALLDIRS=vendor USE_SRV_RR=1 USE_LIBPCRE=1 SANE_TOOL_PATH= INSTALL=install TAR=tar NO_CROSS_DIRECTORY_HARDLINKS=1 NO_INSTALL_HARDLINKS=1 DEFAULT_PAGER=pager DEFAULT_EDITOR=editor CC='gcc' CFLAGS='-Wall -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2' LDFLAGS='-Wl,-z,relro'
make[1]: Entering directory '/«PKGBUILDDIR»/contrib/subtree'
/usr/bin/make -C ../../ GIT-VERSION-FILE
make[2]: Entering directory '/«PKGBUILDDIR»'
make[2]: 'GIT-VERSION-FILE' is up to date.
make[2]: Leaving directory '/«PKGBUILDDIR»'
install -d -m 755 /«PKGBUILDDIR»/debian/git/usr/lib/git-core
install -m 755 git-subtree /«PKGBUILDDIR»/debian/git/usr/lib/git-core
make[1]: Leaving directory '/«PKGBUILDDIR»/contrib/subtree'
install -d -m0755 '/«PKGBUILDDIR»/debian/git'/var/lib/git
rm -f '/«PKGBUILDDIR»/debian/git'/usr/share/perl5/Error.pm
rm -rf '/«PKGBUILDDIR»/debian/git'/usr/share/man
chmod 644 '/«PKGBUILDDIR»/debian/git'/usr/share/perl5/Git.pm
find '/«PKGBUILDDIR»/debian/git'/usr/share/perl5/Git -type d | xargs chmod 0755
find '/«PKGBUILDDIR»/debian/git'/usr/share/perl5/Git -type f | xargs chmod 0644
# don't include arch, cvs, p4, svn, email, gui tools, and gitk program
for i in git-archimport git-cvs git-p4 git-svn git-send-email \
git-gui git-citool; do \
rm -f '/«PKGBUILDDIR»/debian/git'/usr/lib/git-core/$i*; \
done
rm -f '/«PKGBUILDDIR»/debian/git'/usr/bin/git-cvsserver
rm -f '/«PKGBUILDDIR»/debian/git'/usr/bin/gitk
for i in '/«PKGBUILDDIR»/debian/git'/usr/bin/* '/«PKGBUILDDIR»/debian/git'/usr/lib/git-core/*; do \
test -d $i || \
test "`head -c2 $i`" = '#!' || \
test "`head -c2 $i`" = '# ' || \
strip -R .comment -R .note $i; \
done
# don't include git-gui's lib
rm -rf '/«PKGBUILDDIR»/debian/git'/usr/share/git-gui/
# don't include gitk's lib
rm -rf '/«PKGBUILDDIR»/debian/git'/usr/share/gitk/
# don't include git-svn's lib
rm -rf '/«PKGBUILDDIR»/debian/git'/usr/share/perl5/Git/SVN*
# bash completion
install -d -m0755 '/«PKGBUILDDIR»/debian/git'/usr/share/bash-completion/completions
install -m0644 contrib/completion/git-completion.bash \
'/«PKGBUILDDIR»/debian/git'/usr/share/bash-completion/completions/git
ln -s git '/«PKGBUILDDIR»/debian/git'/usr/share/bash-completion/completions/gitk
# bash prompt
install -m0644 contrib/completion/git-prompt.sh \
'/«PKGBUILDDIR»/debian/git'/usr/lib/git-core/git-sh-prompt
install -d -m0755 '/«PKGBUILDDIR»/debian/git'/etc/bash_completion.d
install -m0644 debian/git-prompt.completion \
'/«PKGBUILDDIR»/debian/git'/etc/bash_completion.d/git-prompt
# sanity check that #642603 fix is still in place
test $(stat -c%h '/«PKGBUILDDIR»/debian/git'/usr/lib/git-core/git-branch) -le 10
# gitweb
install -d -m0755 '/«PKGBUILDDIR»/debian/git'/usr/share/gitweb
ln -s gitweb.cgi '/«PKGBUILDDIR»/debian/git'/usr/share/gitweb/index.cgi
# contrib hooks
install -d -m0755 '/«PKGBUILDDIR»/debian/git'/usr/share/git-core/contrib/hooks
set -e; for i in contrib/hooks/*; do \
test "$i" != contrib/hooks/multimail || continue; \
install -m0755 "$i" \
'/«PKGBUILDDIR»/debian/git'/usr/share/git-core/contrib/hooks/; \
done
# contrib
install -d -m0755 '/«PKGBUILDDIR»/debian/git'/usr/share/doc/git
cp -R contrib '/«PKGBUILDDIR»/debian/git'/usr/share/doc/git/
rm -rf '/«PKGBUILDDIR»/debian/git'/usr/share/doc/git/contrib/completion
rm -rf '/«PKGBUILDDIR»/debian/git'/usr/share/doc/git/contrib/emacs
rm -rf '/«PKGBUILDDIR»/debian/git'/usr/share/doc/git/contrib/mw-to-git
find '/«PKGBUILDDIR»/debian/git'/usr/share/doc/git/contrib -type f | xargs chmod 0644
find '/«PKGBUILDDIR»/debian/git'/usr/share/doc/git/contrib -type d | xargs chmod 0755
# remove contrib hooks, they are now installed in
# /usr/share/git-core/contrib, keep symlink for backward compatibility
rm -rf '/«PKGBUILDDIR»/debian/git'/usr/share/doc/git/contrib/hooks
ln -s ../../../git-core/contrib/hooks \
'/«PKGBUILDDIR»/debian/git'/usr/share/doc/git/contrib/
find '/«PKGBUILDDIR»/debian/git'/usr/share/doc/git/ -name .gitignore | xargs rm -f
: implicit
rm: cannot remove 'debian/git/usr/share/doc/git/contrib': Is a directory
: debian/git/usr/share/doc/git/
+ install -m0644 debian/copyright debian/git/usr/share/doc/git/
+ install -m0644 debian/changelog debian/git/usr/share/doc/git/changelog.Debian
+ install -m0644 debian/changelog.upstream debian/git/usr/share/doc/git/changelog
+ install -m0644 README debian/git/usr/share/doc/git/
+ install -d -m0755 debian/git/usr/share/doc/git/RelNotes
+ install -m0644 Documentation/RelNotes/1.5.0.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.0.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.0.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.0.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.0.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.0.6.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.0.7.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.0.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.1.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.1.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.1.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.1.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.1.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.1.6.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.2.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.2.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.2.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.2.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.2.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.3.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.3.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.3.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.3.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.3.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.3.6.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.3.7.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.3.8.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.4.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.4.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.4.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.4.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.4.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.4.6.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.4.7.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.5.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.5.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.5.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.5.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.5.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.5.6.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.6.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.6.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.6.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.6.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.6.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.6.6.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.5.6.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.0.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.0.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.0.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.0.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.0.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.0.6.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.0.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.1.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.1.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.1.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.1.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.2.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.2.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.2.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.2.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.2.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.3.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.3.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.3.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.3.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.4.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.4.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.4.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.4.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.4.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.5.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.5.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.5.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.5.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.5.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.5.6.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.5.7.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.5.8.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.5.9.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.6.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.6.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.6.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.6.6.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.0.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.0.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.0.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.0.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.0.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.0.6.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.0.7.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.0.8.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.0.9.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.0.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.1.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.1.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.1.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.1.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.10.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.10.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.10.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.10.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.10.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.10.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.11.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.11.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.11.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.11.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.11.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.11.6.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.11.7.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.11.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.12.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.12.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.12.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.12.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.12.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.2.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.2.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.2.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.2.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.2.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.3.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.3.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.3.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.3.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.3.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.4.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.4.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.4.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.4.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.4.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.5.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.5.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.5.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.5.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.6.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.6.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.6.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.6.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.6.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.6.6.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.6.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.7.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.7.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.7.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.7.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.7.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.7.6.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.7.7.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.7.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.8.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.8.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.8.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.8.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.8.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.8.6.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.8.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.9.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.9.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.9.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.9.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.9.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.9.6.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.9.7.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.7.9.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.0.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.0.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.0.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.0.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.1.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.1.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.1.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.1.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.1.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.1.6.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.2.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.2.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.2.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.3.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.3.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.3.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.3.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.4.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.4.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.4.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.4.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.4.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.5.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.5.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.5.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.5.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.5.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.5.6.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.8.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.9.0.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.9.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.9.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.9.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.9.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/1.9.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/2.0.0.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/2.0.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/2.0.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/2.0.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/2.0.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/2.0.5.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/2.1.0.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/2.1.1.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/2.1.2.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/2.1.3.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 Documentation/RelNotes/2.1.4.txt debian/git/usr/share/doc/git/RelNotes/
+ install -m0644 debian/git.README.Debian debian/git/usr/share/doc/git/README.Debian
+ install -m0644 debian/git.README.emacs debian/git/usr/share/doc/git/README.emacs
+ install -m0644 debian/git.README.source debian/git/usr/share/doc/git/README.source
+ install -m0644 debian/git.NEWS.Debian debian/git/usr/share/doc/git/NEWS.Debian
+ gzip -9 debian/git/usr/share/doc/git/NEWS.Debian
: debian/git/usr/share/doc/git/examples/
: debian/git/usr/share/doc/git/ ok
: debian/git/usr/share/lintian/overrides
+ install -m0644 debian/git.lintian-overrides debian/git/usr/share/lintian/overrides/git
: debian/git/usr/share/doc-base
ls: cannot access debian/git.doc-base.*: No such file or directory
: debian/git/usr/share/doc,doc-base,lintian ok
: debian/git/DEBIAN/
+ install -m0644 debian/git.conffiles debian/git/DEBIAN/conffiles
+ install -m0755 debian/git.preinst debian/git/DEBIAN/preinst
+ install -m0755 debian/git.prerm debian/git/DEBIAN/prerm
+ install -m0755 debian/git.postinst debian/git/DEBIAN/postinst
+ install -m0755 debian/git.postrm debian/git/DEBIAN/postrm
: debian/git/DEBIAN/md5sums
: debian/git/DEBIAN/ ok
: git.deb ok
rm -f debian/substvars
dpkg-shlibdeps '/«PKGBUILDDIR»/debian/git'/usr/bin/* '/«PKGBUILDDIR»/debian/git'/usr/lib/git-core/*
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-sh-setup: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-quiltimport: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-difftool--helper: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-subtree: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-merge-one-file: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-bisect: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-web--browse: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-pull: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-merge-resolve: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-difftool: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-add--interactive: File format not recognized
objdump: Warning: '/«PKGBUILDDIR»/debian/git/usr/lib/git-core/mergetools' is not an ordinary file
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-parse-remote: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-filter-branch: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-merge-octopus: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-sh-i18n: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-submodule: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-mergetool: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-sh-prompt: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-relink: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-rebase: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-mergetool--lib: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-rebase--interactive: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-rebase--merge: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-am: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-stash: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-instaweb: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-rebase--am: File format not recognized
objdump: /«PKGBUILDDIR»/debian/git/usr/lib/git-core/git-request-pull: File format not recognized
dpkg-gencontrol -isp -pgit -P'/«PKGBUILDDIR»/debian/git'
dpkg-gencontrol: warning: -isp is deprecated; it is without effect
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
dpkg -b '/«PKGBUILDDIR»/debian/git' ..
dpkg-deb: building package `git' in `../git_2.1.4-2.1_armhf.deb'.
dpkg-genchanges -B -mRaspbian wandboard test autobuilder <root@raspbian.org> >../git_2.1.4-2.1_armhf.changes
dpkg-genchanges: binary-only arch-specific upload (source code and arch-indep packages not included)
dpkg-source --after-build git-2.1.4
dpkg-buildpackage: binary-only upload (no source included)
────────────────────────────────────────────────────────────────────────────────
Build finished at 20150209-0649
Finished
────────
I: Built successfully
┌──────────────────────────────────────────────────────────────────────────────┐
│ Changes │
└──────────────────────────────────────────────────────────────────────────────┘
git_2.1.4-2.1_armhf.changes:
────────────────────────────
Format: 1.8
Date: Mon, 02 Feb 2015 19:42:37 +0100
Source: git
Binary: git git-man git-core git-doc git-arch git-cvs git-svn git-mediawiki git-email git-daemon-run git-daemon-sysvinit git-gui gitk git-el gitweb git-all
Architecture: armhf
Version: 1:2.1.4-2.1
Distribution: jessie-staging
Urgency: medium
Maintainer: Raspbian wandboard test autobuilder <root@raspbian.org>
Changed-By: Niels Thykier <niels@thykier.net>
Description:
git - fast, scalable, distributed revision control system
git-all - fast, scalable, distributed revision control system (all subpacka
git-arch - fast, scalable, distributed revision control system (arch interop
git-core - fast, scalable, distributed revision control system (obsolete)
git-cvs - fast, scalable, distributed revision control system (cvs interope
git-daemon-run - fast, scalable, distributed revision control system (git-daemon s
git-daemon-sysvinit - fast, scalable, distributed revision control system (git-daemon s
git-doc - fast, scalable, distributed revision control system (documentatio
git-el - fast, scalable, distributed revision control system (emacs suppor
git-email - fast, scalable, distributed revision control system (email add-on
git-gui - fast, scalable, distributed revision control system (GUI)
git-man - fast, scalable, distributed revision control system (manual pages
git-mediawiki - fast, scalable, distributed revision control system (MediaWiki in
git-svn - fast, scalable, distributed revision control system (svn interope
gitk - fast, scalable, distributed revision control system (revision tre
gitweb - fast, scalable, distributed revision control system (web interfac
Closes: 774607
Changes:
git (1:2.1.4-2.1) unstable; urgency=medium
.
* Non-maintainer upload.
* Use interest-noawait triggers for gitweb to avoid a
trigger cycle. (Closes: #774607)
Checksums-Sha1:
62097595742561d42468472b2509c95d0a578f35 2691270 git_2.1.4-2.1_armhf.deb
Checksums-Sha256:
816490ac6f0a3e24b1b8b9b3f67420ef9a6573425e0e597db17fa94242dea172 2691270 git_2.1.4-2.1_armhf.deb
Files:
8337dbf383312ca9ecf3be244d08304f 2691270 vcs optional git_2.1.4-2.1_armhf.deb
┌──────────────────────────────────────────────────────────────────────────────┐
│ Package contents │
└──────────────────────────────────────────────────────────────────────────────┘
git_2.1.4-2.1_armhf.deb
───────────────────────
new debian package, version 2.0.
size 2691270 bytes: control archive=16581 bytes.
34 bytes, 1 lines conffiles
1695 bytes, 29 lines control
32922 bytes, 441 lines md5sums
1570 bytes, 45 lines * postinst #!/bin/sh
1080 bytes, 35 lines * postrm #!/bin/sh
3143 bytes, 98 lines * preinst #!/bin/sh
478 bytes, 12 lines * prerm #!/bin/sh
Package: git
Version: 1:2.1.4-2.1
Architecture: armhf
Maintainer: Gerrit Pape <pape@smarden.org>
Installed-Size: 18269
Depends: libc6 (>= 2.16), libcurl3-gnutls (>= 7.16.2), libexpat1 (>= 2.0.1), libpcre3 (>= 1:8.35), zlib1g (>= 1:1.2.0), perl-modules, liberror-perl, git-man (>> 1:2.1.4), git-man (<< 1:2.1.4-.)
Recommends: patch, less, rsync, ssh-client
Suggests: gettext-base, git-daemon-run | git-daemon-sysvinit, git-doc, git-el, git-email, git-gui, gitk, gitweb, git-arch, git-cvs, git-mediawiki, git-svn
Breaks: bash-completion (<< 1:1.90-1), cogito (<= 0.18.2+), git-buildpackage (<< 0.6.5), git-core (<< 1:1.7.0.4-1.), gitosis (<< 0.2+20090917-7), gitpkg (<< 0.15), gitweb (<< 1:1.7.4~rc1), guilt (<< 0.33), stgit (<< 0.15), stgit-contrib (<< 0.15)
Replaces: git-core (<< 1:1.7.0.4-1.), gitweb (<< 1:1.7.4~rc1)
Provides: git-completion, git-core
Section: vcs
Priority: optional
Multi-Arch: foreign
Homepage: http://git-scm.com/
Description: fast, scalable, distributed revision control system
Git is popular version control system designed to handle very large
projects with speed and efficiency; it is used for many high profile
open source projects, most notably the Linux kernel.
.
Git falls in the category of distributed source code management tools.
Every Git working directory is a full-fledged repository with full
revision tracking capabilities, not dependent on network access or a
central server.
.
This package provides the git main components with minimal dependencies.
Additional functionality, e.g. a graphical user interface and revision
tree visualizer, tools for interoperating with other VCS's, or a web
interface, is provided as separate git* packages.
drwxr-xr-x root/root 0 2015-02-09 06:46 ./
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/bin/
-rwxr-xr-x root/root 1406448 2015-02-09 06:46 ./usr/bin/git
-rwxr-xr-x root/root 659992 2015-02-09 06:46 ./usr/bin/git-shell
-rwxr-xr-x root/root 676416 2015-02-09 06:46 ./usr/bin/git-upload-pack
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/lib/
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/lib/git-core/
-rwxr-xr-x root/root 23281 2015-02-09 06:46 ./usr/lib/git-core/git-am
-rwxr-xr-x root/root 11998 2015-02-09 06:46 ./usr/lib/git-core/git-bisect
-rwxr-xr-x root/root 1968 2015-02-09 06:46 ./usr/lib/git-core/git-difftool--helper
-rwxr-xr-x root/root 11735 2015-02-09 06:46 ./usr/lib/git-core/git-filter-branch
-rwxr-xr-x root/root 2207 2015-02-09 06:46 ./usr/lib/git-core/git-merge-octopus
-rwxr-xr-x root/root 3482 2015-02-09 06:46 ./usr/lib/git-core/git-merge-one-file
-rwxr-xr-x root/root 944 2015-02-09 06:46 ./usr/lib/git-core/git-merge-resolve
-rwxr-xr-x root/root 8645 2015-02-09 06:46 ./usr/lib/git-core/git-mergetool
-rwxr-xr-x root/root 8913 2015-02-09 06:46 ./usr/lib/git-core/git-pull
-rwxr-xr-x root/root 3368 2015-02-09 06:46 ./usr/lib/git-core/git-quiltimport
-rwxr-xr-x root/root 16035 2015-02-09 06:46 ./usr/lib/git-core/git-rebase
-rwxr-xr-x root/root 3861 2015-02-09 06:46 ./usr/lib/git-core/git-request-pull
-rwxr-xr-x root/root 13586 2015-02-09 06:46 ./usr/lib/git-core/git-stash
-rwxr-xr-x root/root 32207 2015-02-09 06:46 ./usr/lib/git-core/git-submodule
-rwxr-xr-x root/root 4401 2015-02-09 06:46 ./usr/lib/git-core/git-web--browse
-rwxr-xr-x root/root 36939 2015-02-09 06:46 ./usr/lib/git-core/git-add--interactive
-rwxr-xr-x root/root 13318 2015-02-09 06:46 ./usr/lib/git-core/git-difftool
-rwxr-xr-x root/root 4198 2015-02-09 06:46 ./usr/lib/git-core/git-relink
-rwxr-xr-x root/root 18526 2015-02-09 06:46 ./usr/lib/git-core/git-instaweb
-rw-r--r-- root/root 7562 2015-02-09 06:46 ./usr/lib/git-core/git-mergetool--lib
-rw-r--r-- root/root 2313 2015-02-09 06:46 ./usr/lib/git-core/git-parse-remote
-rw-r--r-- root/root 2447 2015-02-09 06:46 ./usr/lib/git-core/git-rebase--am
-rw-r--r-- root/root 28512 2015-02-09 06:46 ./usr/lib/git-core/git-rebase--interactive
-rw-r--r-- root/root 3809 2015-02-09 06:46 ./usr/lib/git-core/git-rebase--merge
-rw-r--r-- root/root 8249 2015-02-09 06:46 ./usr/lib/git-core/git-sh-setup
-rw-r--r-- root/root 1972 2015-02-09 06:46 ./usr/lib/git-core/git-sh-i18n
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/lib/git-core/mergetools/
-rw-r--r-- root/root 392 2015-02-09 06:46 ./usr/lib/git-core/mergetools/araxis
-rw-r--r-- root/root 401 2015-02-09 06:46 ./usr/lib/git-core/mergetools/bc3
-rw-r--r-- root/root 387 2015-02-09 06:46 ./usr/lib/git-core/mergetools/codecompare
-rw-r--r-- root/root 628 2015-02-09 06:46 ./usr/lib/git-core/mergetools/deltawalker
-rw-r--r-- root/root 286 2015-02-09 06:46 ./usr/lib/git-core/mergetools/diffmerge
-rw-r--r-- root/root 282 2015-02-09 06:46 ./usr/lib/git-core/mergetools/diffuse
-rw-r--r-- root/root 340 2015-02-09 06:46 ./usr/lib/git-core/mergetools/ecmerge
-rw-r--r-- root/root 415 2015-02-09 06:46 ./usr/lib/git-core/mergetools/emerge
-rw-r--r-- root/root 29 2015-02-09 06:46 ./usr/lib/git-core/mergetools/gvimdiff
-rw-r--r-- root/root 29 2015-02-09 06:46 ./usr/lib/git-core/mergetools/gvimdiff2
-rw-r--r-- root/root 29 2015-02-09 06:46 ./usr/lib/git-core/mergetools/gvimdiff3
-rw-r--r-- root/root 499 2015-02-09 06:46 ./usr/lib/git-core/mergetools/kdiff3
-rw-r--r-- root/root 83 2015-02-09 06:46 ./usr/lib/git-core/mergetools/kompare
-rw-r--r-- root/root 876 2015-02-09 06:46 ./usr/lib/git-core/mergetools/meld
-rw-r--r-- root/root 301 2015-02-09 06:46 ./usr/lib/git-core/mergetools/opendiff
-rw-r--r-- root/root 651 2015-02-09 06:46 ./usr/lib/git-core/mergetools/p4merge
-rw-r--r-- root/root 224 2015-02-09 06:46 ./usr/lib/git-core/mergetools/tkdiff
-rw-r--r-- root/root 638 2015-02-09 06:46 ./usr/lib/git-core/mergetools/tortoisemerge
-rw-r--r-- root/root 878 2015-02-09 06:46 ./usr/lib/git-core/mergetools/vimdiff
-rw-r--r-- root/root 29 2015-02-09 06:46 ./usr/lib/git-core/mergetools/vimdiff2
-rw-r--r-- root/root 29 2015-02-09 06:46 ./usr/lib/git-core/mergetools/vimdiff3
-rw-r--r-- root/root 618 2015-02-09 06:46 ./usr/lib/git-core/mergetools/xxdiff
-rwxr-xr-x root/root 15678 2015-02-09 06:46 ./usr/lib/git-core/git-subtree
-rwxr-xr-x root/root 1406448 2015-02-09 06:46 ./usr/lib/git-core/git
-rwxr-xr-x root/root 655840 2015-02-09 06:46 ./usr/lib/git-core/git-credential-cache
-rwxr-xr-x root/root 664088 2015-02-09 06:46 ./usr/lib/git-core/git-credential-cache--daemon
-rwxr-xr-x root/root 664052 2015-02-09 06:46 ./usr/lib/git-core/git-credential-store
-rwxr-xr-x root/root 672428 2015-02-09 06:46 ./usr/lib/git-core/git-daemon
-rwxr-xr-x root/root 692956 2015-02-09 06:46 ./usr/lib/git-core/git-fast-import
-rwxr-xr-x root/root 664184 2015-02-09 06:46 ./usr/lib/git-core/git-http-backend
-rwxr-xr-x root/root 688840 2015-02-09 06:46 ./usr/lib/git-core/git-http-fetch
-rwxr-xr-x root/root 701160 2015-02-09 06:46 ./usr/lib/git-core/git-http-push
-rwxr-xr-x root/root 672328 2015-02-09 06:46 ./usr/lib/git-core/git-imap-send
-rwxr-xr-x root/root 705292 2015-02-09 06:46 ./usr/lib/git-core/git-remote-http
-rwxr-xr-x root/root 672284 2015-02-09 06:46 ./usr/lib/git-core/git-remote-testsvn
-rwxr-xr-x root/root 655824 2015-02-09 06:46 ./usr/lib/git-core/git-sh-i18n--envsubst
-rwxr-xr-x root/root 659992 2015-02-09 06:46 ./usr/lib/git-core/git-shell
-rwxr-xr-x root/root 655844 2015-02-09 06:46 ./usr/lib/git-core/git-show-index
-rwxr-xr-x root/root 676416 2015-02-09 06:46 ./usr/lib/git-core/git-upload-pack
-rw-r--r-- root/root 15406 2015-02-09 06:46 ./usr/lib/git-core/git-sh-prompt
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/git-core/
drwxr-xr-x root/root 0 2015-02-09 06:12 ./usr/share/git-core/templates/
drwxr-xr-x root/root 0 2015-02-09 06:12 ./usr/share/git-core/templates/branches/
drwxr-xr-x root/root 0 2015-02-09 06:12 ./usr/share/git-core/templates/hooks/
-rwxr-xr-x root/root 452 2015-02-09 06:12 ./usr/share/git-core/templates/hooks/applypatch-msg.sample
-rwxr-xr-x root/root 896 2015-02-09 06:12 ./usr/share/git-core/templates/hooks/commit-msg.sample
-rwxr-xr-x root/root 189 2015-02-09 06:12 ./usr/share/git-core/templates/hooks/post-update.sample
-rwxr-xr-x root/root 398 2015-02-09 06:12 ./usr/share/git-core/templates/hooks/pre-applypatch.sample
-rwxr-xr-x root/root 1642 2015-02-09 06:12 ./usr/share/git-core/templates/hooks/pre-commit.sample
-rwxr-xr-x root/root 1352 2015-02-09 06:12 ./usr/share/git-core/templates/hooks/pre-push.sample
-rwxr-xr-x root/root 4898 2015-02-09 06:12 ./usr/share/git-core/templates/hooks/pre-rebase.sample
-rwxr-xr-x root/root 1239 2015-02-09 06:12 ./usr/share/git-core/templates/hooks/prepare-commit-msg.sample
-rwxr-xr-x root/root 3611 2015-02-09 06:12 ./usr/share/git-core/templates/hooks/update.sample
drwxr-xr-x root/root 0 2015-02-09 06:12 ./usr/share/git-core/templates/info/
-rw-r--r-- root/root 240 2015-02-09 06:12 ./usr/share/git-core/templates/info/exclude
-rw-r--r-- root/root 73 2015-02-09 06:12 ./usr/share/git-core/templates/description
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/git-core/contrib/
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/git-core/contrib/hooks/
-rwxr-xr-x root/root 22070 2015-02-09 06:46 ./usr/share/git-core/contrib/hooks/post-receive-email
-rwxr-xr-x root/root 1259 2015-02-09 06:46 ./usr/share/git-core/contrib/hooks/pre-auto-gc-battery
-rwxr-xr-x root/root 6920 2015-02-09 06:46 ./usr/share/git-core/contrib/hooks/setgitperms.perl
-rwxr-xr-x root/root 11647 2015-02-09 06:46 ./usr/share/git-core/contrib/hooks/update-paranoid
drwxrwxr-x root/root 0 2015-02-09 06:11 ./usr/share/locale/
drwxrwxr-x root/root 0 2015-02-09 06:11 ./usr/share/locale/pt_PT/
drwxrwxr-x root/root 0 2015-02-09 06:11 ./usr/share/locale/pt_PT/LC_MESSAGES/
-rw-rw-r-- root/root 23297 2015-02-09 06:11 ./usr/share/locale/pt_PT/LC_MESSAGES/git.mo
drwxrwxr-x root/root 0 2015-02-09 06:11 ./usr/share/locale/de/
drwxrwxr-x root/root 0 2015-02-09 06:11 ./usr/share/locale/de/LC_MESSAGES/
-rw-rw-r-- root/root 252441 2015-02-09 06:11 ./usr/share/locale/de/LC_MESSAGES/git.mo
drwxrwxr-x root/root 0 2015-02-09 06:11 ./usr/share/locale/vi/
drwxrwxr-x root/root 0 2015-02-09 06:11 ./usr/share/locale/vi/LC_MESSAGES/
-rw-rw-r-- root/root 276101 2015-02-09 06:11 ./usr/share/locale/vi/LC_MESSAGES/git.mo
drwxrwxr-x root/root 0 2015-02-09 06:11 ./usr/share/locale/is/
drwxrwxr-x root/root 0 2015-02-09 06:11 ./usr/share/locale/is/LC_MESSAGES/
-rw-rw-r-- root/root 1734 2015-02-09 06:11 ./usr/share/locale/is/LC_MESSAGES/git.mo
drwxrwxr-x root/root 0 2015-02-09 06:11 ./usr/share/locale/ca/
drwxrwxr-x root/root 0 2015-02-09 06:11 ./usr/share/locale/ca/LC_MESSAGES/
-rw-rw-r-- root/root 244356 2015-02-09 06:11 ./usr/share/locale/ca/LC_MESSAGES/git.mo
drwxrwxr-x root/root 0 2015-02-09 06:11 ./usr/share/locale/sv/
drwxrwxr-x root/root 0 2015-02-09 06:11 ./usr/share/locale/sv/LC_MESSAGES/
-rw-rw-r-- root/root 238048 2015-02-09 06:11 ./usr/share/locale/sv/LC_MESSAGES/git.mo
drwxrwxr-x root/root 0 2015-02-09 06:11 ./usr/share/locale/fr/
drwxrwxr-x root/root 0 2015-02-09 06:11 ./usr/share/locale/fr/LC_MESSAGES/
-rw-rw-r-- root/root 252457 2015-02-09 06:11 ./usr/share/locale/fr/LC_MESSAGES/git.mo
drwxrwxr-x root/root 0 2015-02-09 06:11 ./usr/share/locale/it/
drwxrwxr-x root/root 0 2015-02-09 06:11 ./usr/share/locale/it/LC_MESSAGES/
-rw-rw-r-- root/root 71710 2015-02-09 06:11 ./usr/share/locale/it/LC_MESSAGES/git.mo
drwxrwxr-x root/root 0 2015-02-09 06:11 ./usr/share/locale/bg/
drwxrwxr-x root/root 0 2015-02-09 06:11 ./usr/share/locale/bg/LC_MESSAGES/
-rw-rw-r-- root/root 343806 2015-02-09 06:11 ./usr/share/locale/bg/LC_MESSAGES/git.mo
drwxrwxr-x root/root 0 2015-02-09 06:11 ./usr/share/locale/zh_CN/
drwxrwxr-x root/root 0 2015-02-09 06:11 ./usr/share/locale/zh_CN/LC_MESSAGES/
-rw-rw-r-- root/root 226606 2015-02-09 06:11 ./usr/share/locale/zh_CN/LC_MESSAGES/git.mo
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/perl5/
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/perl5/Git/
-rw-r--r-- root/root 1977 2014-12-18 18:42 ./usr/share/perl5/Git/I18N.pm
-rw-r--r-- root/root 644 2014-12-18 18:42 ./usr/share/perl5/Git/IndexInfo.pm
-rw-r--r-- root/root 44726 2014-12-18 18:42 ./usr/share/perl5/Git.pm
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/gitweb/
-rwxr-xr-x root/root 251433 2015-02-09 06:46 ./usr/share/gitweb/gitweb.cgi
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/gitweb/static/
-rw-r--r-- root/root 48814 2015-02-09 06:46 ./usr/share/gitweb/static/gitweb.js
-rw-r--r-- root/root 10637 2015-02-09 06:46 ./usr/share/gitweb/static/gitweb.css
-rw-r--r-- root/root 207 2015-02-09 06:46 ./usr/share/gitweb/static/git-logo.png
-rw-r--r-- root/root 115 2015-02-09 06:46 ./usr/share/gitweb/static/git-favicon.png
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/bash-completion/
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/bash-completion/completions/
-rw-r--r-- root/root 56293 2015-02-09 06:46 ./usr/share/bash-completion/completions/git
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/
-rw-r--r-- root/root 2113 2015-02-09 06:46 ./usr/share/doc/git/contrib/README
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/buildsystems/
-rw-r--r-- root/root 1100 2015-02-09 06:46 ./usr/share/doc/git/contrib/buildsystems/Generators.pm
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/buildsystems/Generators/
-rw-r--r-- root/root 5063 2015-02-09 06:46 ./usr/share/doc/git/contrib/buildsystems/Generators/QMake.pm
-rw-r--r-- root/root 16344 2015-02-09 06:46 ./usr/share/doc/git/contrib/buildsystems/Generators/Vcproj.pm
-rw-r--r-- root/root 11033 2015-02-09 06:46 ./usr/share/doc/git/contrib/buildsystems/engine.pl
-rw-r--r-- root/root 1208 2015-02-09 06:46 ./usr/share/doc/git/contrib/buildsystems/generate
-rw-r--r-- root/root 6675 2015-02-09 06:46 ./usr/share/doc/git/contrib/buildsystems/parse.pl
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/contacts/
-rw-r--r-- root/root 4497 2015-02-09 06:46 ./usr/share/doc/git/contrib/contacts/git-contacts
-rw-r--r-- root/root 2584 2015-02-09 06:46 ./usr/share/doc/git/contrib/contacts/git-contacts.txt
-rw-r--r-- root/root 751 2015-02-09 06:46 ./usr/share/doc/git/contrib/convert-grafts-to-replace-refs.sh
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/convert-objects/
-rw-r--r-- root/root 7436 2015-02-09 06:46 ./usr/share/doc/git/contrib/convert-objects/convert-objects.c
-rw-r--r-- root/root 464 2015-02-09 06:46 ./usr/share/doc/git/contrib/convert-objects/git-convert-objects.txt
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/credential/
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/credential/gnome-keyring/
-rw-r--r-- root/root 459 2015-02-09 06:46 ./usr/share/doc/git/contrib/credential/gnome-keyring/Makefile
-rw-r--r-- root/root 11707 2015-02-09 06:46 ./usr/share/doc/git/contrib/credential/gnome-keyring/git-credential-gnome-keyring.c
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/credential/netrc/
-rw-r--r-- root/root 48 2015-02-09 06:46 ./usr/share/doc/git/contrib/credential/netrc/Makefile
-rw-r--r-- root/root 10285 2015-02-09 06:46 ./usr/share/doc/git/contrib/credential/netrc/git-credential-netrc
-rw-r--r-- root/root 337 2015-02-09 06:46 ./usr/share/doc/git/contrib/credential/netrc/test.netrc
-rw-r--r-- root/root 2950 2015-02-09 06:46 ./usr/share/doc/git/contrib/credential/netrc/test.pl
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/credential/osxkeychain/
-rw-r--r-- root/root 420 2015-02-09 06:46 ./usr/share/doc/git/contrib/credential/osxkeychain/Makefile
-rw-r--r-- root/root 3865 2015-02-09 06:46 ./usr/share/doc/git/contrib/credential/osxkeychain/git-credential-osxkeychain.c
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/credential/wincred/
-rw-r--r-- root/root 438 2015-02-09 06:46 ./usr/share/doc/git/contrib/credential/wincred/Makefile
-rw-r--r-- root/root 7347 2015-02-09 06:46 ./usr/share/doc/git/contrib/credential/wincred/git-credential-wincred.c
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/diff-highlight/
-rw-r--r-- root/root 5343 2015-02-09 06:46 ./usr/share/doc/git/contrib/diff-highlight/README
-rw-r--r-- root/root 3811 2015-02-09 06:46 ./usr/share/doc/git/contrib/diff-highlight/diff-highlight
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/examples/
-rw-r--r-- root/root 167 2015-02-09 06:46 ./usr/share/doc/git/contrib/examples/README
-rw-r--r-- root/root 13057 2015-02-09 06:46 ./usr/share/doc/git/contrib/examples/builtin-fetch--tool.c
-rw-r--r-- root/root 7621 2015-02-09 06:46 ./usr/share/doc/git/contrib/examples/git-checkout.sh
-rw-r--r-- root/root 2261 2015-02-09 06:46 ./usr/share/doc/git/contrib/examples/git-clean.sh
-rw-r--r-- root/root 12711 2015-02-09 06:46 ./usr/share/doc/git/contrib/examples/git-clone.sh
-rw-r--r-- root/root 14390 2015-02-09 06:46 ./usr/share/doc/git/contrib/examples/git-commit.sh
-rw-r--r-- root/root 9114 2015-02-09 06:46 ./usr/share/doc/git/contrib/examples/git-fetch.sh
-rw-r--r-- root/root 594 2015-02-09 06:46 ./usr/share/doc/git/contrib/examples/git-gc.sh
-rw-r--r-- root/root 372 2015-02-09 06:46 ./usr/share/doc/git/contrib/examples/git-log.sh
-rw-r--r-- root/root 2546 2015-02-09 06:46 ./usr/share/doc/git/contrib/examples/git-ls-remote.sh
-rw-r--r-- root/root 338 2015-02-09 06:46 ./usr/share/doc/git/contrib/examples/git-merge-ours.sh
-rw-r--r-- root/root 14431 2015-02-09 06:46 ./usr/share/doc/git/contrib/examples/git-merge.sh
-rw-r--r-- root/root 2717 2015-02-09 06:46 ./usr/share/doc/git/contrib/examples/git-notes.sh
-rw-r--r-- root/root 10388 2015-02-09 06:46 ./usr/share/doc/git/contrib/examples/git-remote.perl
-rw-r--r-- root/root 4994 2015-02-09 06:46 ./usr/share/doc/git/contrib/examples/git-repack.sh
-rw-r--r-- root/root 6195 2015-02-09 06:46 ./usr/share/doc/git/contrib/examples/git-rerere.perl
-rw-r--r-- root/root 2302 2015-02-09 06:46 ./usr/share/doc/git/contrib/examples/git-reset.sh
-rw-r--r-- root/root 2721 2015-02-09 06:46 ./usr/share/doc/git/contrib/examples/git-resolve.sh
-rw-r--r-- root/root 4695 2015-02-09 06:46 ./usr/share/doc/git/contrib/examples/git-revert.sh
-rw-r--r-- root/root 24971 2015-02-09 06:46 ./usr/share/doc/git/contrib/examples/git-svnimport.perl
-rw-r--r-- root/root 5391 2015-02-09 06:46 ./usr/share/doc/git/contrib/examples/git-svnimport.txt
-rw-r--r-- root/root 4028 2015-02-09 06:46 ./usr/share/doc/git/contrib/examples/git-tag.sh
-rw-r--r-- root/root 749 2015-02-09 06:46 ./usr/share/doc/git/contrib/examples/git-verify-tag.sh
-rw-r--r-- root/root 924 2015-02-09 06:46 ./usr/share/doc/git/contrib/examples/git-whatchanged.sh
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/fast-import/
-rw-r--r-- root/root 1451 2015-02-09 06:46 ./usr/share/doc/git/contrib/fast-import/git-import.perl
-rw-r--r-- root/root 724 2015-02-09 06:46 ./usr/share/doc/git/contrib/fast-import/git-import.sh
-rw-r--r-- root/root 476 2015-02-09 06:46 ./usr/share/doc/git/contrib/fast-import/git-p4.README
-rw-r--r-- root/root 11191 2015-02-09 06:46 ./usr/share/doc/git/contrib/fast-import/import-directories.perl
-rw-r--r-- root/root 5330 2015-02-09 06:46 ./usr/share/doc/git/contrib/fast-import/import-tars.perl
-rw-r--r-- root/root 2241 2015-02-09 06:46 ./usr/share/doc/git/contrib/fast-import/import-zips.py
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/git-jump/
-rw-r--r-- root/root 2829 2015-02-09 06:46 ./usr/share/doc/git/contrib/git-jump/README
-rw-r--r-- root/root 1353 2015-02-09 06:46 ./usr/share/doc/git/contrib/git-jump/git-jump
-rw-r--r-- root/root 4407 2015-02-09 06:46 ./usr/share/doc/git/contrib/git-resurrect.sh
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/git-shell-commands/
-rw-r--r-- root/root 839 2015-02-09 06:46 ./usr/share/doc/git/contrib/git-shell-commands/README
-rw-r--r-- root/root 283 2015-02-09 06:46 ./usr/share/doc/git/contrib/git-shell-commands/help
-rw-r--r-- root/root 227 2015-02-09 06:46 ./usr/share/doc/git/contrib/git-shell-commands/list
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/gitview/
-rw-r--r-- root/root 38465 2015-02-09 06:46 ./usr/share/doc/git/contrib/gitview/gitview
-rw-r--r-- root/root 835 2015-02-09 06:46 ./usr/share/doc/git/contrib/gitview/gitview.txt
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/hg-to-git/
-rw-r--r-- root/root 8074 2015-02-09 06:46 ./usr/share/doc/git/contrib/hg-to-git/hg-to-git.py
-rw-r--r-- root/root 890 2015-02-09 06:46 ./usr/share/doc/git/contrib/hg-to-git/hg-to-git.txt
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/persistent-https/
-rw-r--r-- root/root 11358 2015-02-09 06:46 ./usr/share/doc/git/contrib/persistent-https/LICENSE
-rw-r--r-- root/root 1383 2015-02-09 06:46 ./usr/share/doc/git/contrib/persistent-https/Makefile
-rw-r--r-- root/root 1659 2015-02-09 06:46 ./usr/share/doc/git/contrib/persistent-https/README
-rw-r--r-- root/root 4937 2015-02-09 06:46 ./usr/share/doc/git/contrib/persistent-https/client.go
-rw-r--r-- root/root 2424 2015-02-09 06:46 ./usr/share/doc/git/contrib/persistent-https/main.go
-rw-r--r-- root/root 4786 2015-02-09 06:46 ./usr/share/doc/git/contrib/persistent-https/proxy.go
-rw-r--r-- root/root 2917 2015-02-09 06:46 ./usr/share/doc/git/contrib/persistent-https/socket.go
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/remote-helpers/
-rw-r--r-- root/root 649 2015-02-09 06:46 ./usr/share/doc/git/contrib/remote-helpers/README
-rw-r--r-- root/root 497 2015-02-09 06:46 ./usr/share/doc/git/contrib/remote-helpers/git-remote-bzr
-rw-r--r-- root/root 491 2015-02-09 06:46 ./usr/share/doc/git/contrib/remote-helpers/git-remote-hg
-rw-r--r-- root/root 770 2015-02-09 06:46 ./usr/share/doc/git/contrib/remotes2config.sh
-rw-r--r-- root/root 1009 2015-02-09 06:46 ./usr/share/doc/git/contrib/rerere-train.sh
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/stats/
-rw-r--r-- root/root 708 2015-02-09 06:46 ./usr/share/doc/git/contrib/stats/git-common-hash
-rw-r--r-- root/root 1319 2015-02-09 06:46 ./usr/share/doc/git/contrib/stats/mailmap.pl
-rw-r--r-- root/root 6675 2015-02-09 06:46 ./usr/share/doc/git/contrib/stats/packinfo.pl
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/subtree/
-rw-r--r-- root/root 17987 2015-02-09 06:46 ./usr/share/doc/git/contrib/subtree/COPYING
-rw-r--r-- root/root 566 2015-02-09 06:46 ./usr/share/doc/git/contrib/subtree/INSTALL
-rw-r--r-- root/root 1692 2015-02-09 06:46 ./usr/share/doc/git/contrib/subtree/Makefile
-rw-r--r-- root/root 211 2015-02-09 06:46 ./usr/share/doc/git/contrib/subtree/README
-rw-r--r-- root/root 15678 2015-02-09 06:46 ./usr/share/doc/git/contrib/subtree/git-subtree.sh
-rw-r--r-- root/root 12776 2015-02-09 06:46 ./usr/share/doc/git/contrib/subtree/git-subtree.txt
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/subtree/t/
-rw-r--r-- root/root 1637 2015-02-09 06:46 ./usr/share/doc/git/contrib/subtree/t/Makefile
-rw-r--r-- root/root 13438 2015-02-09 06:46 ./usr/share/doc/git/contrib/subtree/t/t7900-subtree.sh
-rw-r--r-- root/root 1733 2015-02-09 06:46 ./usr/share/doc/git/contrib/subtree/todo
-rw-r--r-- root/root 15678 2015-02-09 06:46 ./usr/share/doc/git/contrib/subtree/git-subtree
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/svn-fe/
-rw-r--r-- root/root 1495 2015-02-09 06:46 ./usr/share/doc/git/contrib/svn-fe/Makefile
-rw-r--r-- root/root 361 2015-02-09 06:46 ./usr/share/doc/git/contrib/svn-fe/svn-fe.c
-rw-r--r-- root/root 2107 2015-02-09 06:46 ./usr/share/doc/git/contrib/svn-fe/svn-fe.txt
-rw-r--r-- root/root 2044 2015-02-09 06:46 ./usr/share/doc/git/contrib/svn-fe/svnrdump_sim.py
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/thunderbird-patch-inline/
-rw-r--r-- root/root 725 2015-02-09 06:46 ./usr/share/doc/git/contrib/thunderbird-patch-inline/README
-rw-r--r-- root/root 1409 2015-02-09 06:46 ./usr/share/doc/git/contrib/thunderbird-patch-inline/appp.sh
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/workdir/
-rw-r--r-- root/root 1886 2015-02-09 06:46 ./usr/share/doc/git/contrib/workdir/git-new-workdir
-rw-r--r-- root/root 18062 2015-02-09 06:46 ./usr/share/doc/git/copyright
-rw-r--r-- root/root 532684 2015-02-09 06:46 ./usr/share/doc/git/changelog.gz
-rw-r--r-- root/root 34415 2015-02-09 06:46 ./usr/share/doc/git/changelog.Debian.gz
-rw-r--r-- root/root 2625 2015-02-09 06:46 ./usr/share/doc/git/README
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/
-rw-r--r-- root/root 1255 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.0.1.txt
-rw-r--r-- root/root 2308 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.0.2.txt
-rw-r--r-- root/root 1577 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.0.3.txt
-rw-r--r-- root/root 462 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.0.4.txt
-rw-r--r-- root/root 609 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.0.5.txt
-rw-r--r-- root/root 484 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.0.6.txt
-rw-r--r-- root/root 482 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.0.7.txt
-rw-r--r-- root/root 18638 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.0.txt
-rw-r--r-- root/root 2164 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.1.1.txt
-rw-r--r-- root/root 1651 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.1.2.txt
-rw-r--r-- root/root 1566 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.1.3.txt
-rw-r--r-- root/root 843 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.1.4.txt
-rw-r--r-- root/root 1430 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.1.5.txt
-rw-r--r-- root/root 1519 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.1.6.txt
-rw-r--r-- root/root 13288 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.1.txt
-rw-r--r-- root/root 1457 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.2.1.txt
-rw-r--r-- root/root 2086 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.2.2.txt
-rw-r--r-- root/root 796 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.2.3.txt
-rw-r--r-- root/root 802 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.2.4.txt
-rw-r--r-- root/root 928 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.2.5.txt
-rw-r--r-- root/root 7355 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.2.txt
-rw-r--r-- root/root 326 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.3.1.txt
-rw-r--r-- root/root 1931 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.3.2.txt
-rw-r--r-- root/root 896 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.3.3.txt
-rw-r--r-- root/root 1208 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.3.4.txt
-rw-r--r-- root/root 3376 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.3.5.txt
-rw-r--r-- root/root 1432 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.3.6.txt
-rw-r--r-- root/root 1584 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.3.7.txt
-rw-r--r-- root/root 783 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.3.8.txt
-rw-r--r-- root/root 14030 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.3.txt
-rw-r--r-- root/root 524 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.4.1.txt
-rw-r--r-- root/root 1530 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.4.2.txt
-rw-r--r-- root/root 997 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.4.3.txt
-rw-r--r-- root/root 2617 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.4.4.txt
-rw-r--r-- root/root 2241 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.4.5.txt
-rw-r--r-- root/root 1440 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.4.6.txt
-rw-r--r-- root/root 342 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.4.7.txt
-rw-r--r-- root/root 14424 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.4.txt
-rw-r--r-- root/root 1499 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.5.1.txt
-rw-r--r-- root/root 772 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.5.2.txt
-rw-r--r-- root/root 305 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.5.3.txt
-rw-r--r-- root/root 140 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.5.4.txt
-rw-r--r-- root/root 449 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.5.5.txt
-rw-r--r-- root/root 342 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.5.6.txt
-rw-r--r-- root/root 7596 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.5.txt
-rw-r--r-- root/root 793 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.6.1.txt
-rw-r--r-- root/root 1457 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.6.2.txt
-rw-r--r-- root/root 2113 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.6.3.txt
-rw-r--r-- root/root 1573 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.6.4.txt
-rw-r--r-- root/root 1041 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.6.5.txt
-rw-r--r-- root/root 342 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.6.6.txt
-rw-r--r-- root/root 3843 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.5.6.txt
-rw-r--r-- root/root 1188 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.0.1.txt
-rw-r--r-- root/root 2840 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.0.2.txt
-rw-r--r-- root/root 4318 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.0.3.txt
-rw-r--r-- root/root 1293 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.0.4.txt
-rw-r--r-- root/root 2014 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.0.5.txt
-rw-r--r-- root/root 1193 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.0.6.txt
-rw-r--r-- root/root 10049 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.0.txt
-rw-r--r-- root/root 1976 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.1.1.txt
-rw-r--r-- root/root 1640 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.1.2.txt
-rw-r--r-- root/root 847 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.1.3.txt
-rw-r--r-- root/root 1593 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.1.4.txt
-rw-r--r-- root/root 10322 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.1.txt
-rw-r--r-- root/root 597 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.2.1.txt
-rw-r--r-- root/root 1508 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.2.2.txt
-rw-r--r-- root/root 781 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.2.3.txt
-rw-r--r-- root/root 1351 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.2.4.txt
-rw-r--r-- root/root 688 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.2.5.txt
-rw-r--r-- root/root 5892 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.2.txt
-rw-r--r-- root/root 343 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.3.1.txt
-rw-r--r-- root/root 2271 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.3.2.txt
-rw-r--r-- root/root 1379 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.3.3.txt
-rw-r--r-- root/root 1206 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.3.4.txt
-rw-r--r-- root/root 6791 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.3.txt
-rw-r--r-- root/root 1906 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.4.1.txt
-rw-r--r-- root/root 1210 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.4.2.txt
-rw-r--r-- root/root 1146 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.4.3.txt
-rw-r--r-- root/root 1034 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.4.4.txt
-rw-r--r-- root/root 605 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.4.5.txt
-rw-r--r-- root/root 5357 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.4.txt
-rw-r--r-- root/root 549 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.5.1.txt
-rw-r--r-- root/root 581 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.5.2.txt
-rw-r--r-- root/root 2485 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.5.3.txt
-rw-r--r-- root/root 1275 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.5.4.txt
-rw-r--r-- root/root 1891 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.5.5.txt
-rw-r--r-- root/root 791 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.5.6.txt
-rw-r--r-- root/root 771 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.5.7.txt
-rw-r--r-- root/root 900 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.5.8.txt
-rw-r--r-- root/root 581 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.5.9.txt
-rw-r--r-- root/root 6294 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.5.txt
-rw-r--r-- root/root 1230 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.6.1.txt
-rw-r--r-- root/root 1599 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.6.2.txt
-rw-r--r-- root/root 751 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.6.3.txt
-rw-r--r-- root/root 9463 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.6.6.txt
-rw-r--r-- root/root 1287 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.0.1.txt
-rw-r--r-- root/root 1476 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.0.2.txt
-rw-r--r-- root/root 1176 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.0.3.txt
-rw-r--r-- root/root 888 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.0.4.txt
-rw-r--r-- root/root 915 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.0.5.txt
-rw-r--r-- root/root 365 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.0.6.txt
-rw-r--r-- root/root 467 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.0.7.txt
-rw-r--r-- root/root 452 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.0.8.txt
-rw-r--r-- root/root 219 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.0.9.txt
-rw-r--r-- root/root 8765 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.0.txt
-rw-r--r-- root/root 3825 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.1.1.txt
-rw-r--r-- root/root 1069 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.1.2.txt
-rw-r--r-- root/root 452 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.1.3.txt
-rw-r--r-- root/root 219 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.1.4.txt
-rw-r--r-- root/root 2941 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.1.txt
-rw-r--r-- root/root 3074 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.10.1.txt
-rw-r--r-- root/root 3445 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.10.2.txt
-rw-r--r-- root/root 1876 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.10.3.txt
-rw-r--r-- root/root 1056 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.10.4.txt
-rw-r--r-- root/root 397 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.10.5.txt
-rw-r--r-- root/root 9025 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.10.txt
-rw-r--r-- root/root 224 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.11.1.txt
-rw-r--r-- root/root 2291 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.11.2.txt
-rw-r--r-- root/root 2314 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.11.3.txt
-rw-r--r-- root/root 1171 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.11.4.txt
-rw-r--r-- root/root 1292 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.11.5.txt
-rw-r--r-- root/root 3436 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.11.6.txt
-rw-r--r-- root/root 1959 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.11.7.txt
-rw-r--r-- root/root 5506 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.11.txt
-rw-r--r-- root/root 5800 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.12.1.txt
-rw-r--r-- root/root 1767 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.12.2.txt
-rw-r--r-- root/root 1330 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.12.3.txt
-rw-r--r-- root/root 712 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.12.4.txt
-rw-r--r-- root/root 5336 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.12.txt
-rw-r--r-- root/root 806 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.2.1.txt
-rw-r--r-- root/root 695 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.2.2.txt
-rw-r--r-- root/root 1355 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.2.3.txt
-rw-r--r-- root/root 452 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.2.4.txt
-rw-r--r-- root/root 219 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.2.5.txt
-rw-r--r-- root/root 5978 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.2.txt
-rw-r--r-- root/root 425 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.3.1.txt
-rw-r--r-- root/root 149 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.3.2.txt
-rw-r--r-- root/root 2075 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.3.3.txt
-rw-r--r-- root/root 1639 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.3.4.txt
-rw-r--r-- root/root 1454 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.3.5.txt
-rw-r--r-- root/root 2642 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.3.txt
-rw-r--r-- root/root 899 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.4.1.txt
-rw-r--r-- root/root 2290 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.4.2.txt
-rw-r--r-- root/root 1245 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.4.3.txt
-rw-r--r-- root/root 1288 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.4.4.txt
-rw-r--r-- root/root 127 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.4.5.txt
-rw-r--r-- root/root 6502 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.4.txt
-rw-r--r-- root/root 1905 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.5.1.txt
-rw-r--r-- root/root 2189 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.5.2.txt
-rw-r--r-- root/root 1101 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.5.3.txt
-rw-r--r-- root/root 754 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.5.4.txt
-rw-r--r-- root/root 5329 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.5.txt
-rw-r--r-- root/root 2248 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.6.1.txt
-rw-r--r-- root/root 245 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.6.2.txt
-rw-r--r-- root/root 792 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.6.3.txt
-rw-r--r-- root/root 1264 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.6.4.txt
-rw-r--r-- root/root 969 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.6.5.txt
-rw-r--r-- root/root 587 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.6.6.txt
-rw-r--r-- root/root 5507 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.6.txt
-rw-r--r-- root/root 2432 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.7.1.txt
-rw-r--r-- root/root 1630 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.7.2.txt
-rw-r--r-- root/root 696 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.7.3.txt
-rw-r--r-- root/root 444 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.7.4.txt
-rw-r--r-- root/root 481 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.7.5.txt
-rw-r--r-- root/root 791 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.7.6.txt
-rw-r--r-- root/root 334 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.7.7.txt
-rw-r--r-- root/root 5409 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.7.txt
-rw-r--r-- root/root 1438 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.8.1.txt
-rw-r--r-- root/root 2925 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.8.2.txt
-rw-r--r-- root/root 431 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.8.3.txt
-rw-r--r-- root/root 921 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.8.4.txt
-rw-r--r-- root/root 606 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.8.5.txt
-rw-r--r-- root/root 621 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.8.6.txt
-rw-r--r-- root/root 6351 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.8.txt
-rw-r--r-- root/root 2461 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.9.1.txt
-rw-r--r-- root/root 2706 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.9.2.txt
-rw-r--r-- root/root 1958 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.9.3.txt
-rw-r--r-- root/root 887 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.9.4.txt
-rw-r--r-- root/root 731 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.9.5.txt
-rw-r--r-- root/root 432 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.9.6.txt
-rw-r--r-- root/root 371 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.9.7.txt
-rw-r--r-- root/root 4373 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.7.9.txt
-rw-r--r-- root/root 2454 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.0.1.txt
-rw-r--r-- root/root 1250 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.0.2.txt
-rw-r--r-- root/root 424 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.0.3.txt
-rw-r--r-- root/root 11073 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.0.txt
-rw-r--r-- root/root 3577 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.1.1.txt
-rw-r--r-- root/root 991 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.1.2.txt
-rw-r--r-- root/root 1740 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.1.3.txt
-rw-r--r-- root/root 337 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.1.4.txt
-rw-r--r-- root/root 1940 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.1.5.txt
-rw-r--r-- root/root 1563 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.1.6.txt
-rw-r--r-- root/root 9624 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.1.txt
-rw-r--r-- root/root 4561 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.2.1.txt
-rw-r--r-- root/root 2438 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.2.2.txt
-rw-r--r-- root/root 672 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.2.3.txt
-rw-r--r-- root/root 22140 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.2.txt
-rw-r--r-- root/root 431 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.3.1.txt
-rw-r--r-- root/root 2406 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.3.2.txt
-rw-r--r-- root/root 1778 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.3.3.txt
-rw-r--r-- root/root 700 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.3.4.txt
-rw-r--r-- root/root 18336 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.3.txt
-rw-r--r-- root/root 3010 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.4.1.txt
-rw-r--r-- root/root 3292 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.4.2.txt
-rw-r--r-- root/root 2206 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.4.3.txt
-rw-r--r-- root/root 340 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.4.4.txt
-rw-r--r-- root/root 421 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.4.5.txt
-rw-r--r-- root/root 21237 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.4.txt
-rw-r--r-- root/root 254 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.5.1.txt
-rw-r--r-- root/root 656 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.5.2.txt
-rw-r--r-- root/root 859 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.5.3.txt
-rw-r--r-- root/root 1912 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.5.4.txt
-rw-r--r-- root/root 1466 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.5.5.txt
-rw-r--r-- root/root 1686 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.5.6.txt
-rw-r--r-- root/root 20348 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.8.5.txt
-rw-r--r-- root/root 15198 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.9.0.txt
-rw-r--r-- root/root 2409 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.9.1.txt
-rw-r--r-- root/root 2807 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.9.2.txt
-rw-r--r-- root/root 635 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.9.3.txt
-rw-r--r-- root/root 607 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.9.4.txt
-rw-r--r-- root/root 1678 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/1.9.5.txt
-rw-r--r-- root/root 15911 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/2.0.0.txt
-rw-r--r-- root/root 5171 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/2.0.1.txt
-rw-r--r-- root/root 1350 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/2.0.2.txt
-rw-r--r-- root/root 592 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/2.0.3.txt
-rw-r--r-- root/root 153 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/2.0.4.txt
-rw-r--r-- root/root 1678 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/2.0.5.txt
-rw-r--r-- root/root 17336 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/2.1.0.txt
-rw-r--r-- root/root 1806 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/2.1.1.txt
-rw-r--r-- root/root 768 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/2.1.2.txt
-rw-r--r-- root/root 970 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/2.1.3.txt
-rw-r--r-- root/root 1678 2015-02-09 06:46 ./usr/share/doc/git/RelNotes/2.1.4.txt
-rw-r--r-- root/root 2561 2015-02-09 06:46 ./usr/share/doc/git/README.Debian
-rw-r--r-- root/root 1294 2015-02-09 06:46 ./usr/share/doc/git/README.emacs
-rw-r--r-- root/root 3040 2015-02-09 06:46 ./usr/share/doc/git/README.source
-rw-r--r-- root/root 1744 2015-02-09 06:46 ./usr/share/doc/git/NEWS.Debian.gz
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/lintian/
drwxr-xr-x root/root 0 2015-02-09 06:46 ./usr/share/lintian/overrides/
-rw-r--r-- root/root 486 2015-02-09 06:46 ./usr/share/lintian/overrides/git
drwxr-xr-x root/root 0 2015-02-09 06:46 ./var/
drwxr-xr-x root/root 0 2015-02-09 06:46 ./var/lib/
drwxr-xr-x root/root 0 2015-02-09 06:46 ./var/lib/git/
drwxr-xr-x root/root 0 2015-02-09 06:46 ./etc/
drwxr-xr-x root/root 0 2015-02-09 06:46 ./etc/bash_completion.d/
-rw-r--r-- root/root 439 2015-02-09 06:46 ./etc/bash_completion.d/git-prompt
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/bin/git-receive-pack -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/bin/git-upload-archive -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-add -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-annotate -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-apply -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-archive -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-bisect--helper -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-blame -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-branch -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-bundle -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-cat-file -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-check-attr -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-check-ignore -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-check-mailmap -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-check-ref-format -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-checkout-index -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-checkout -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-clean -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-clone -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-column -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-commit-tree -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-commit -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-config -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-count-objects -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-credential -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-describe -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-diff-files -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-diff-index -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-diff-tree -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-diff -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-fast-export -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-fetch-pack -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-fetch -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-fmt-merge-msg -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-for-each-ref -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-fsck -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-gc -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-get-tar-commit-id -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-grep -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-hash-object -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-help -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-index-pack -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-init-db -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-log -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-ls-files -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-ls-remote -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-ls-tree -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-mailinfo -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-mailsplit -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-merge -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-merge-base -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-merge-file -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-merge-index -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-merge-ours -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-merge-recursive -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-merge-tree -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-mktag -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-mktree -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-mv -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-name-rev -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-notes -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-pack-objects -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-pack-redundant -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-pack-refs -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-patch-id -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-prune-packed -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-prune -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-push -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-read-tree -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-receive-pack -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-reflog -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-remote -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-remote-ext -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-remote-fd -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-repack -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-replace -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-rerere -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-reset -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-rev-list -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-rev-parse -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-revert -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-rm -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-send-pack -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-shortlog -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-show-branch -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-show-ref -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-stripspace -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-symbolic-ref -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-tag -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-unpack-file -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-unpack-objects -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-update-index -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-update-ref -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-update-server-info -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-upload-archive -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-var -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-verify-commit -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-verify-pack -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-verify-tag -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-write-tree -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-cherry -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-cherry-pick -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-format-patch -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-fsck-objects -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-init -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-merge-subtree -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-show -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-stage -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-status -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-whatchanged -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-remote-https -> git-remote-http
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-remote-ftp -> git-remote-http
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/lib/git-core/git-remote-ftps -> git-remote-http
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/share/gitweb/index.cgi -> gitweb.cgi
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/share/bash-completion/completions/gitk -> git
lrwxrwxrwx root/root 0 2015-02-09 06:46 ./usr/share/doc/git/contrib/hooks -> ../../../git-core/contrib/hooks
┌──────────────────────────────────────────────────────────────────────────────┐
│ Post Build │
└──────────────────────────────────────────────────────────────────────────────┘
┌──────────────────────────────────────────────────────────────────────────────┐
│ Cleanup │
└──────────────────────────────────────────────────────────────────────────────┘
Purging /«BUILDDIR»
Not cleaning session: cloned chroot in use
┌──────────────────────────────────────────────────────────────────────────────┐
│ Summary │
└──────────────────────────────────────────────────────────────────────────────┘
Build Architecture: armhf
Build-Space: 215476
Build-Time: 2468
Distribution: jessie-staging
Host Architecture: armhf
Install-Time: 286
Job: git_1:2.1.4-2.1
Machine Architecture: armhf
Package: git
Package-Time: 2810
Source-Version: 1:2.1.4-2.1
Space: 215476
Status: successful
Version: 1:2.1.4-2.1
────────────────────────────────────────────────────────────────────────────────
Finished at 20150209-0649
Build needed 00:46:50, 215476k disc space