gdisk →
0.8.8-1 →
armhf → 2014-01-05 05:39:07
sbuild (Debian sbuild) 0.63.2 (18 Aug 2012) on bm-wb-04
╔══════════════════════════════════════════════════════════════════════════════╗
║ gdisk 0.8.8-1 (armhf) 05 Jan 2014 05:31 ║
╚══════════════════════════════════════════════════════════════════════════════╝
Package: gdisk
Version: 0.8.8-1
Source Version: 0.8.8-1
Distribution: jessie-staging
Machine Architecture: armhf
Host Architecture: armhf
Build Architecture: armhf
I: NOTICE: Log filtering will replace 'build/gdisk-m_uZBL/gdisk-0.8.8' with '«PKGBUILDDIR»'
I: NOTICE: Log filtering will replace 'build/gdisk-m_uZBL' with '«BUILDDIR»'
I: NOTICE: Log filtering will replace 'var/lib/schroot/mount/jessie-staging-armhf-sbuild-25c61135-38cb-42b8-90fa-531676eda915' with '«CHROOT»'
┌──────────────────────────────────────────────────────────────────────────────┐
│ Update chroot │
└──────────────────────────────────────────────────────────────────────────────┘
Get:1 http://172.17.0.1 jessie-staging InRelease [11.3 kB]
Get:2 http://172.17.0.1 jessie-staging/main Sources [7130 kB]
Get:3 http://172.17.0.1 jessie-staging/main armhf Packages [8257 kB]
Ign http://172.17.0.1 jessie-staging/main Translation-en
Fetched 15.4 MB in 30s (498 kB/s)
Reading package lists...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Fetch source files │
└──────────────────────────────────────────────────────────────────────────────┘
Check APT
─────────
Checking available source versions...
Download source files with APT
──────────────────────────────
Reading package lists...
Building dependency tree...
Reading state information...
NOTICE: 'gdisk' packaging is maintained in the 'Git' version control system at:
git://anonscm.debian.org/collab-maint/gdisk.git
Need to get 197 kB of source archives.
Get:1 http://172.17.0.1/private/ jessie-staging/main gdisk 0.8.8-1 (dsc) [1939 B]
Get:2 http://172.17.0.1/private/ jessie-staging/main gdisk 0.8.8-1 (tar) [188 kB]
Get:3 http://172.17.0.1/private/ jessie-staging/main gdisk 0.8.8-1 (diff) [6225 B]
Fetched 197 kB in 0s (3330 kB/s)
Download complete and in download only mode
Check arch
──────────
Merged Build-Depends: build-essential, fakeroot
Filtered Build-Depends: build-essential, fakeroot
dpkg-deb: building package `sbuild-build-depends-core-dummy' in `/«BUILDDIR»/resolver-ncf7RD/apt_archive/sbuild-build-depends-core-dummy.deb'.
OK
Reading package lists...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Install core build dependencies (apt-based resolver) │
└──────────────────────────────────────────────────────────────────────────────┘
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
sbuild-build-depends-core-dummy
debconf: delaying package configuration, since apt-utils is not installed
0 upgraded, 1 newly installed, 0 to remove and 6 not upgraded.
Need to get 0 B/764 B of archives.
After this operation, 0 B of additional disk space will be used.
Selecting previously unselected package sbuild-build-depends-core-dummy.
(Reading database ... 11446 files and directories currently installed.)
Preparing to unpack .../sbuild-build-depends-core-dummy.deb ...
Unpacking sbuild-build-depends-core-dummy (0.invalid.0) ...
Setting up sbuild-build-depends-core-dummy (0.invalid.0) ...
Merged Build-Depends: base-files, base-passwd, bash, bsdutils, coreutils, dash, debianutils, diffutils, dpkg, e2fsprogs, findutils, grep, gzip, hostname, libc-bin, login, mount, ncurses-base, ncurses-bin, perl-base, sed, sysvinit, sysvinit-utils, tar, util-linux, libc6-dev | libc-dev, gcc (>= 4:4.4.3), g++ (>= 4:4.4.3), make, dpkg-dev (>= 1.13.5), debhelper (>= 9), libpopt-dev, uuid-dev, libicu-dev, libncurses5-dev
Filtered Build-Depends: base-files, base-passwd, bash, bsdutils, coreutils, dash, debianutils, diffutils, dpkg, e2fsprogs, findutils, grep, gzip, hostname, libc-bin, login, mount, ncurses-base, ncurses-bin, perl-base, sed, sysvinit, sysvinit-utils, tar, util-linux, libc6-dev, gcc (>= 4:4.4.3), g++ (>= 4:4.4.3), make, dpkg-dev (>= 1.13.5), debhelper (>= 9), libpopt-dev, uuid-dev, libicu-dev, libncurses5-dev
dpkg-deb: building package `sbuild-build-depends-gdisk-dummy' in `/«BUILDDIR»/resolver-EARvaR/apt_archive/sbuild-build-depends-gdisk-dummy.deb'.
OK
Reading package lists...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Install gdisk build dependencies (apt-based resolver) │
└──────────────────────────────────────────────────────────────────────────────┘
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
bsdmainutils debhelper file gettext gettext-base groff-base icu-devtools
intltool-debian libasprintf0c2 libcroco3 libffi6 libglib2.0-0 libicu-dev
libicu52 libmagic1 libncurses5-dev libpipeline1 libpopt-dev libpopt0
libtinfo-dev libunistring0 libxml2 man-db po-debconf uuid-dev
Suggested packages:
wamerican wordlist whois vacation dh-make gettext-doc groff icu-doc
ncurses-doc less www-browser libmail-box-perl
Recommended packages:
curl wget lynx-cur autopoint libasprintf-dev libgettextpo-dev
libglib2.0-data shared-mime-info xml-core libmail-sendmail-perl
The following NEW packages will be installed:
bsdmainutils debhelper file gettext gettext-base groff-base icu-devtools
intltool-debian libasprintf0c2 libcroco3 libffi6 libglib2.0-0 libicu-dev
libicu52 libmagic1 libncurses5-dev libpipeline1 libpopt-dev libpopt0
libtinfo-dev libunistring0 libxml2 man-db po-debconf
sbuild-build-depends-gdisk-dummy uuid-dev
0 upgraded, 26 newly installed, 0 to remove and 6 not upgraded.
Need to get 22.9 MB/22.9 MB of archives.
After this operation, 85.9 MB of additional disk space will be used.
Get:1 http://172.17.0.1/private/ jessie-staging/main libpipeline1 armhf 1.2.6-1 [24.4 kB]
Get:2 http://172.17.0.1/private/ jessie-staging/main libpopt0 armhf 1.16-8 [55.0 kB]
Get:3 http://172.17.0.1/private/ jessie-staging/main groff-base armhf 1.22.2-3 [666 kB]
Get:4 http://172.17.0.1/private/ jessie-staging/main bsdmainutils armhf 9.0.5 [206 kB]
Get:5 http://172.17.0.1/private/ jessie-staging/main man-db armhf 2.6.5-2 [949 kB]
Get:6 http://172.17.0.1/private/ jessie-staging/main libasprintf0c2 armhf 0.18.3.1-2 [29.5 kB]
Get:7 http://172.17.0.1/private/ jessie-staging/main libmagic1 armhf 1:5.14-2 [213 kB]
Get:8 http://172.17.0.1/private/ jessie-staging/main libxml2 armhf 2.9.1+dfsg1-3 [836 kB]
Get:9 http://172.17.0.1/private/ jessie-staging/main libffi6 armhf 3.0.13-4 [19.8 kB]
Get:10 http://172.17.0.1/private/ jessie-staging/main libglib2.0-0 armhf 2.36.4-1 [1907 kB]
Get:11 http://172.17.0.1/private/ jessie-staging/main libcroco3 armhf 0.6.8-2 [119 kB]
Get:12 http://172.17.0.1/private/ jessie-staging/main libicu52 armhf 52.1-3 [6517 kB]
Get:13 http://172.17.0.1/private/ jessie-staging/main libunistring0 armhf 0.9.3-5 [408 kB]
Get:14 http://172.17.0.1/private/ jessie-staging/main file armhf 1:5.14-2 [53.8 kB]
Get:15 http://172.17.0.1/private/ jessie-staging/main gettext-base armhf 0.18.3.1-2 [135 kB]
Get:16 http://172.17.0.1/private/ jessie-staging/main gettext armhf 0.18.3.1-2 [1829 kB]
Get:17 http://172.17.0.1/private/ jessie-staging/main intltool-debian all 0.35.0+20060710.1 [29.8 kB]
Get:18 http://172.17.0.1/private/ jessie-staging/main po-debconf all 1.0.16+nmu2 [223 kB]
Get:19 http://172.17.0.1/private/ jessie-staging/main debhelper all 9.20131227 [687 kB]
Get:20 http://172.17.0.1/private/ jessie-staging/main icu-devtools armhf 52.1-3 [158 kB]
Get:21 http://172.17.0.1/private/ jessie-staging/main libicu-dev armhf 52.1-3 [7406 kB]
Get:22 http://172.17.0.1/private/ jessie-staging/main libtinfo-dev armhf 5.9+20130608-1 [92.5 kB]
Get:23 http://172.17.0.1/private/ jessie-staging/main libncurses5-dev armhf 5.9+20130608-1 [201 kB]
Get:24 http://172.17.0.1/private/ jessie-staging/main libpopt-dev armhf 1.16-8 [52.3 kB]
Get:25 http://172.17.0.1/private/ jessie-staging/main uuid-dev armhf 2.20.1-5.5 [71.9 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 22.9 MB in 5s (4267 kB/s)
Selecting previously unselected package libpipeline1:armhf.
(Reading database ... 11446 files and directories currently installed.)
Preparing to unpack .../libpipeline1_1.2.6-1_armhf.deb ...
Unpacking libpipeline1:armhf (1.2.6-1) ...
Selecting previously unselected package libpopt0:armhf.
Preparing to unpack .../libpopt0_1.16-8_armhf.deb ...
Unpacking libpopt0:armhf (1.16-8) ...
Selecting previously unselected package groff-base.
Preparing to unpack .../groff-base_1.22.2-3_armhf.deb ...
Unpacking groff-base (1.22.2-3) ...
Selecting previously unselected package bsdmainutils.
Preparing to unpack .../bsdmainutils_9.0.5_armhf.deb ...
Unpacking bsdmainutils (9.0.5) ...
Selecting previously unselected package man-db.
Preparing to unpack .../man-db_2.6.5-2_armhf.deb ...
Unpacking man-db (2.6.5-2) ...
Selecting previously unselected package libasprintf0c2:armhf.
Preparing to unpack .../libasprintf0c2_0.18.3.1-2_armhf.deb ...
Unpacking libasprintf0c2:armhf (0.18.3.1-2) ...
Selecting previously unselected package libmagic1:armhf.
Preparing to unpack .../libmagic1_1%3a5.14-2_armhf.deb ...
Unpacking libmagic1:armhf (1:5.14-2) ...
Selecting previously unselected package libxml2:armhf.
Preparing to unpack .../libxml2_2.9.1+dfsg1-3_armhf.deb ...
Unpacking libxml2:armhf (2.9.1+dfsg1-3) ...
Selecting previously unselected package libffi6:armhf.
Preparing to unpack .../libffi6_3.0.13-4_armhf.deb ...
Unpacking libffi6:armhf (3.0.13-4) ...
Selecting previously unselected package libglib2.0-0:armhf.
Preparing to unpack .../libglib2.0-0_2.36.4-1_armhf.deb ...
Unpacking libglib2.0-0:armhf (2.36.4-1) ...
Selecting previously unselected package libcroco3:armhf.
Preparing to unpack .../libcroco3_0.6.8-2_armhf.deb ...
Unpacking libcroco3:armhf (0.6.8-2) ...
Selecting previously unselected package libicu52:armhf.
Preparing to unpack .../libicu52_52.1-3_armhf.deb ...
Unpacking libicu52:armhf (52.1-3) ...
Selecting previously unselected package libunistring0:armhf.
Preparing to unpack .../libunistring0_0.9.3-5_armhf.deb ...
Unpacking libunistring0:armhf (0.9.3-5) ...
Selecting previously unselected package file.
Preparing to unpack .../file_1%3a5.14-2_armhf.deb ...
Unpacking file (1:5.14-2) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../gettext-base_0.18.3.1-2_armhf.deb ...
Unpacking gettext-base (0.18.3.1-2) ...
Selecting previously unselected package gettext.
Preparing to unpack .../gettext_0.18.3.1-2_armhf.deb ...
Unpacking gettext (0.18.3.1-2) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../intltool-debian_0.35.0+20060710.1_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.1) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../po-debconf_1.0.16+nmu2_all.deb ...
Unpacking po-debconf (1.0.16+nmu2) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../debhelper_9.20131227_all.deb ...
Unpacking debhelper (9.20131227) ...
Selecting previously unselected package icu-devtools.
Preparing to unpack .../icu-devtools_52.1-3_armhf.deb ...
Unpacking icu-devtools (52.1-3) ...
Selecting previously unselected package libicu-dev:armhf.
Preparing to unpack .../libicu-dev_52.1-3_armhf.deb ...
Unpacking libicu-dev:armhf (52.1-3) ...
Selecting previously unselected package libtinfo-dev:armhf.
Preparing to unpack .../libtinfo-dev_5.9+20130608-1_armhf.deb ...
Unpacking libtinfo-dev:armhf (5.9+20130608-1) ...
Selecting previously unselected package libncurses5-dev:armhf.
Preparing to unpack .../libncurses5-dev_5.9+20130608-1_armhf.deb ...
Unpacking libncurses5-dev:armhf (5.9+20130608-1) ...
Selecting previously unselected package libpopt-dev:armhf.
Preparing to unpack .../libpopt-dev_1.16-8_armhf.deb ...
Unpacking libpopt-dev:armhf (1.16-8) ...
Selecting previously unselected package uuid-dev.
Preparing to unpack .../uuid-dev_2.20.1-5.5_armhf.deb ...
Unpacking uuid-dev (2.20.1-5.5) ...
Selecting previously unselected package sbuild-build-depends-gdisk-dummy.
Preparing to unpack .../sbuild-build-depends-gdisk-dummy.deb ...
Unpacking sbuild-build-depends-gdisk-dummy (0.invalid.0) ...
Setting up libpipeline1:armhf (1.2.6-1) ...
Setting up libpopt0:armhf (1.16-8) ...
Setting up groff-base (1.22.2-3) ...
Setting up bsdmainutils (9.0.5) ...
update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode
update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode
Setting up man-db (2.6.5-2) ...
Not building database; man-db/auto-update is not 'true'.
Setting up libasprintf0c2:armhf (0.18.3.1-2) ...
Setting up libmagic1:armhf (1:5.14-2) ...
Setting up libxml2:armhf (2.9.1+dfsg1-3) ...
Setting up libffi6:armhf (3.0.13-4) ...
Setting up libglib2.0-0:armhf (2.36.4-1) ...
No schema files found: doing nothing.
Setting up libcroco3:armhf (0.6.8-2) ...
Setting up libicu52:armhf (52.1-3) ...
Setting up libunistring0:armhf (0.9.3-5) ...
Setting up file (1:5.14-2) ...
Setting up gettext-base (0.18.3.1-2) ...
Setting up gettext (0.18.3.1-2) ...
Setting up intltool-debian (0.35.0+20060710.1) ...
Setting up po-debconf (1.0.16+nmu2) ...
Setting up debhelper (9.20131227) ...
Setting up icu-devtools (52.1-3) ...
Setting up libicu-dev:armhf (52.1-3) ...
Setting up libtinfo-dev:armhf (5.9+20130608-1) ...
Setting up libncurses5-dev:armhf (5.9+20130608-1) ...
Setting up libpopt-dev:armhf (1.16-8) ...
Setting up uuid-dev (2.20.1-5.5) ...
Setting up sbuild-build-depends-gdisk-dummy (0.invalid.0) ...
Processing triggers for libc-bin (2.17-97) ...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Build environment │
└──────────────────────────────────────────────────────────────────────────────┘
Kernel: Linux 3.11.0-armv7-x13 armhf (armv7l)
Toolchain package versions: binutils_2.24-2 dpkg-dev_1.17.5 g++-4.8_4.8.2-10 gcc-4.8_4.8.2-10 libc6-dev_2.17-97 libstdc++-4.8-dev_4.8.2-10 libstdc++6_4.8.2-10 linux-libc-dev_3.10.11-1+rpi1
Package versions: apt_0.9.14.1+rpi1 base-files_7.2+rpi1 base-passwd_3.5.28 bash_4.2+dfsg-1 binutils_2.24-2 bsdmainutils_9.0.5 bsdutils_1:2.20.1-5.5 build-essential_11.6 bzip2_1.0.6-5 coreutils_8.21-1 cpio_2.11+dfsg-1 cpp_4:4.8.2-1 cpp-4.8_4.8.2-10 dash_0.5.7-3 debconf_1.5.52 debconf-i18n_1.5.52 debfoster_2.7-1.2 debhelper_9.20131227 debianutils_4.4 diffutils_1:3.3-1 dpkg_1.17.5 dpkg-dev_1.17.5 e2fslibs_1.42.8-1 e2fsprogs_1.42.8-1 fakeroot_1.18.4-2 file_1:5.14-2 findutils_4.4.2-7 g++_4:4.8.2-1 g++-4.8_4.8.2-10 gcc_4:4.8.2-1 gcc-4.5-base_4.5.3-12+rpi1 gcc-4.6-base_4.6.4-5+rpi1 gcc-4.7-base_4.7.3-9+rpi1 gcc-4.8_4.8.2-10 gcc-4.8-base_4.8.2-10 gettext_0.18.3.1-2 gettext-base_0.18.3.1-2 gnupg_1.4.15-3 gpgv_1.4.15-3 grep_2.15-2 groff-base_1.22.2-3 gzip_1.6-2 hostname_3.15 icu-devtools_52.1-3 initramfs-tools_0.115 initscripts_2.88dsf-43 insserv_1.14.0-5 intltool-debian_0.35.0+20060710.1 klibc-utils_2.0.2-1+rpi1 kmod_9-3 libacl1_2.2.52-1 libapt-pkg4.12_0.9.14.1+rpi1 libasan0_4.8.2-10 libasprintf0c2_0.18.3.1-2 libatomic1_4.8.2-10 libattr1_1:2.4.47-1 libaudit-common_1:2.3.2-2 libaudit1_1:2.3.2-2 libblkid1_2.20.1-5.5 libbz2-1.0_1.0.6-5 libc-bin_2.17-97 libc-dev-bin_2.17-97 libc6_2.17-97 libc6-dev_2.17-97 libcap2_1:2.22-1.2 libcloog-isl4_0.18.1-3 libcomerr2_1.42.8-1 libcroco3_0.6.8-2 libdb5.1_5.1.29-6 libdbus-1-3_1.6.18-2 libdpkg-perl_1.17.5 libffi6_3.0.13-4 libgc1c2_1:7.2d-6 libgcc-4.8-dev_4.8.2-10 libgcc1_1:4.8.2-10 libgdbm3_1.8.3-12 libglib2.0-0_2.36.4-1 libgmp10_2:5.1.3+dfsg-1 libgomp1_4.8.2-10 libicu-dev_52.1-3 libicu52_52.1-3 libisl10_0.12.1-2 libklibc_2.0.2-1+rpi1 libkmod2_9-3 liblocale-gettext-perl_1.05-7+b3 liblzma5_5.1.1alpha+20120614-2 libmagic1_1:5.14-2 libmount1_2.20.1-5.5 libmpc3_1.0.1-1 libmpfr4_3.1.2-1 libncurses5_5.9+20130608-1 libncurses5-dev_5.9+20130608-1 libncursesw5_5.9+20130608-1 libnih-dbus1_1.0.3-4.2 libnih1_1.0.3-4.2 libpam-modules_1.1.3-9 libpam-modules-bin_1.1.3-9 libpam-runtime_1.1.3-9 libpam0g_1.1.3-9 libpcre3_1:8.31-2 libpipeline1_1.2.6-1 libpopt-dev_1.16-8 libpopt0_1.16-8 libprocps0_1:3.3.4-2 libreadline6_6.2+dfsg-0.1 libselinux1_2.2.1-1 libsemanage-common_2.2-1 libsemanage1_2.2-1 libsepol1_2.2-1 libslang2_2.2.4-16 libss2_1.42.8-1 libstdc++-4.8-dev_4.8.2-10 libstdc++6_4.8.2-10 libtext-charwidth-perl_0.04-7+b3 libtext-iconv-perl_1.7-5+b3 libtext-wrapi18n-perl_0.06-7 libtimedate-perl_2.3000-1 libtinfo-dev_5.9+20130608-1 libtinfo5_5.9+20130608-1 libudev1_204-5 libunistring0_0.9.3-5 libusb-0.1-4_2:0.1.12-23.3 libustr-1.0-1_1.0.4-3 libuuid1_2.20.1-5.5 libxml2_2.9.1+dfsg1-3 linux-libc-dev_3.10.11-1+rpi1 login_1:4.1.5.1-1 lsb-base_4.1+Debian12+rpi1 make_3.81-8.3 makedev_2.3.1-93 man-db_2.6.5-2 mawk_1.3.3-17 mount_2.20.1-5.5 mountall_2.52 multiarch-support_2.17-97 ncurses-base_5.9+20130608-1 ncurses-bin_5.9+20130608-1 passwd_1:4.1.5.1-1 patch_2.7.1-4 perl_5.18.1-5 perl-base_5.18.1-5 perl-modules_5.18.1-5 plymouth_0.8.8-6+deb8u3 po-debconf_1.0.16+nmu2 procps_1:3.3.4-2 raspbian-archive-keyring_20120528.2 readline-common_6.2+dfsg-0.1 sbuild-build-depends-core-dummy_0.invalid.0 sbuild-build-depends-gdisk-dummy_0.invalid.0 sed_4.2.2-3 sensible-utils_0.0.9 sysv-rc_2.88dsf-43 sysvinit_2.88dsf-43 sysvinit-utils_2.88dsf-43 tar_1.26+dfsg-8 tzdata_2013i-1 udev_204-5 util-linux_2.20.1-5.5 uuid-dev_2.20.1-5.5 xz-utils_5.1.1alpha+20120614-2 zlib1g_1:1.2.8.dfsg-1
┌──────────────────────────────────────────────────────────────────────────────┐
│ Build │
└──────────────────────────────────────────────────────────────────────────────┘
Unpack source
─────────────
gpgv: keyblock resource `/sbuild-nonexistent/.gnupg/trustedkeys.gpg': file open error
gpgv: Signature made Wed Dec 25 20:51:19 2013 UTC using RSA key ID 6AA15948
gpgv: Can't check signature: public key not found
dpkg-source: warning: failed to verify signature on ./gdisk_0.8.8-1.dsc
dpkg-source: info: extracting gdisk in gdisk-0.8.8
dpkg-source: info: unpacking gdisk_0.8.8.orig.tar.gz
dpkg-source: info: unpacking gdisk_0.8.8-1.debian.tar.gz
dpkg-source: info: applying set_default_partition_type-test.diff
dpkg-source: info: applying manpages.diff
dpkg-source: info: applying kfreebsd_character_devices.diff
dpkg-source: info: applying fix-change_disk_uid-test.diff
dpkg-source: info: applying conditional-icu.diff
Check disc space
────────────────
Sufficient free space for build
User Environment
────────────────
APT_CONFIG=/var/lib/sbuild/apt.conf
DEB_BUILD_OPTIONS=parallel=4
HOME=/sbuild-nonexistent
LANG=en_GB.UTF-8
LC_ALL=POSIX
LOGNAME=root
MAIL=/var/mail/root
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
PWD=/root
SCHROOT_ALIAS_NAME=jessie-staging-armhf-sbuild
SCHROOT_CHROOT_NAME=jessie-staging-armhf-sbuild
SCHROOT_COMMAND=env
SCHROOT_GID=109
SCHROOT_GROUP=buildd
SCHROOT_SESSION_ID=jessie-staging-armhf-sbuild-25c61135-38cb-42b8-90fa-531676eda915
SCHROOT_UID=104
SCHROOT_USER=buildd
SHELL=/bin/sh
SHLVL=1
SSH_CLIENT=172.17.0.6 59986 22
SSH_CONNECTION=172.17.0.6 59986 172.17.2.4 22
SSH_TTY=/dev/pts/1
TERM=xterm
USER=buildd
_=/etc/init.d/buildd
dpkg-buildpackage
─────────────────
dpkg-buildpackage: source package gdisk
dpkg-buildpackage: source version 0.8.8-1
dpkg-buildpackage: source distribution unstable
dpkg-source --before-build gdisk-0.8.8
dpkg-buildpackage: host architecture armhf
fakeroot debian/rules clean
dh clean
dh_testdir
dh_auto_clean
make[1]: Entering directory `/«PKGBUILDDIR»'
rm -f core *.o *~ gdisk sgdisk cgdisk fixparts
make[1]: Leaving directory `/«PKGBUILDDIR»'
debian/rules override_dh_clean
make[1]: Entering directory `/«PKGBUILDDIR»'
rm -f -rf /«PKGBUILDDIR»/build-gdisk
rm -f -rf /«PKGBUILDDIR»/build-gdisk-noicu
/usr/bin/make clean
make[2]: Entering directory `/«PKGBUILDDIR»'
rm -f core *.o *~ gdisk sgdisk cgdisk fixparts
make[2]: Leaving directory `/«PKGBUILDDIR»'
dh_clean
make[1]: Leaving directory `/«PKGBUILDDIR»'
debian/rules build-arch
dh build-arch
dh_testdir -a
dh_auto_configure -a
debian/rules override_dh_auto_build
make[1]: Entering directory `/«PKGBUILDDIR»'
install -d /«PKGBUILDDIR»/build-gdisk
/usr/bin/make -C /«PKGBUILDDIR»/build-gdisk -f ../Makefile VPATH=..
make[2]: Entering directory `/«PKGBUILDDIR»/build-gdisk'
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -D USE_UTF16 -c -o crc32.o ../crc32.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -D USE_UTF16 -c -o support.o ../support.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -D USE_UTF16 -c -o guid.o ../guid.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -D USE_UTF16 -c -o gptpart.o ../gptpart.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -D USE_UTF16 -c -o mbrpart.o ../mbrpart.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -D USE_UTF16 -c -o basicmbr.o ../basicmbr.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -D USE_UTF16 -c -o mbr.o ../mbr.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -D USE_UTF16 -c -o gpt.o ../gpt.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -D USE_UTF16 -c -o bsd.o ../bsd.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -D USE_UTF16 -c -o parttypes.o ../parttypes.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -D USE_UTF16 -c -o attributes.o ../attributes.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -D USE_UTF16 -c -o diskio.o ../diskio.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -D USE_UTF16 -c -o diskio-unix.o ../diskio-unix.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -D USE_UTF16 -c -o cgdisk.o ../cgdisk.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -D USE_UTF16 -c -o gptcurses.o ../gptcurses.cc
g++ crc32.o support.o guid.o gptpart.o mbrpart.o basicmbr.o mbr.o gpt.o bsd.o parttypes.o attributes.o diskio.o diskio-unix.o cgdisk.o gptcurses.o -licuio -licuuc -luuid -lncurses -o cgdisk
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -D USE_UTF16 -c -o gdisk.o ../gdisk.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -D USE_UTF16 -c -o gpttext.o ../gpttext.cc
g++ crc32.o support.o guid.o gptpart.o mbrpart.o basicmbr.o mbr.o gpt.o bsd.o parttypes.o attributes.o diskio.o diskio-unix.o gdisk.o gpttext.o -licuio -licuuc -luuid -o gdisk
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -D USE_UTF16 -c -o sgdisk.o ../sgdisk.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -D USE_UTF16 -c -o gptcl.o ../gptcl.cc
g++ crc32.o support.o guid.o gptpart.o mbrpart.o basicmbr.o mbr.o gpt.o bsd.o parttypes.o attributes.o diskio.o diskio-unix.o sgdisk.o gptcl.o -licuio -licuuc -luuid -lpopt -o sgdisk
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -D USE_UTF16 -c -o fixparts.o ../fixparts.cc
g++ support.o diskio.o diskio-unix.o basicmbr.o mbrpart.o fixparts.o -o fixparts
make[2]: Leaving directory `/«PKGBUILDDIR»/build-gdisk'
install -d /«PKGBUILDDIR»/build-gdisk-noicu
/usr/bin/make -C /«PKGBUILDDIR»/build-gdisk-noicu -f ../Makefile VPATH=.. USE_ICU=0
make[2]: Entering directory `/«PKGBUILDDIR»/build-gdisk-noicu'
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -c -o crc32.o ../crc32.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -c -o support.o ../support.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -c -o guid.o ../guid.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -c -o gptpart.o ../gptpart.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -c -o mbrpart.o ../mbrpart.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -c -o basicmbr.o ../basicmbr.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -c -o mbr.o ../mbr.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -c -o gpt.o ../gpt.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -c -o bsd.o ../bsd.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -c -o parttypes.o ../parttypes.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -c -o attributes.o ../attributes.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -c -o diskio.o ../diskio.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -c -o diskio-unix.o ../diskio-unix.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -c -o cgdisk.o ../cgdisk.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -c -o gptcurses.o ../gptcurses.cc
g++ crc32.o support.o guid.o gptpart.o mbrpart.o basicmbr.o mbr.o gpt.o bsd.o parttypes.o attributes.o diskio.o diskio-unix.o cgdisk.o gptcurses.o -luuid -lncurses -o cgdisk
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -c -o gdisk.o ../gdisk.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -c -o gpttext.o ../gpttext.cc
g++ crc32.o support.o guid.o gptpart.o mbrpart.o basicmbr.o mbr.o gpt.o bsd.o parttypes.o attributes.o diskio.o diskio-unix.o gdisk.o gpttext.o -luuid -o gdisk
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -c -o sgdisk.o ../sgdisk.cc
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -c -o gptcl.o ../gptcl.cc
g++ crc32.o support.o guid.o gptpart.o mbrpart.o basicmbr.o mbr.o gpt.o bsd.o parttypes.o attributes.o diskio.o diskio-unix.o sgdisk.o gptcl.o -luuid -lpopt -o sgdisk
g++ -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -c -o fixparts.o ../fixparts.cc
g++ support.o diskio.o diskio-unix.o basicmbr.o mbrpart.o fixparts.o -o fixparts
make[2]: Leaving directory `/«PKGBUILDDIR»/build-gdisk-noicu'
make[1]: Leaving directory `/«PKGBUILDDIR»'
debian/rules override_dh_auto_test
make[1]: Entering directory `/«PKGBUILDDIR»'
./gdisk_test.sh build-gdisk
65536+0 records in
65536+0 records out
67108864 bytes (67 MB) copied, 3.04707 s, 22.0 MB/s
[0;32m**SUCCESS**[m Temp disk sucessfully created
[0;34m**Testing gdisk binary**[m
GPT fdisk (gdisk) version 0.8.8
Partition table scan:
MBR: not present
BSD: not present
APM: not present
GPT: not present
Creating new GPT entries.
Command (? for help): This option deletes all partitions and creates a new protective MBR.
Proceed? (Y/N):
Command (? for help):
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.hp7KFAzXki.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m Create new empty GPT table
GPT fdisk (gdisk) version 0.8.8
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help): Partition number (1-128, default 1): First sector (34-131038, default = 2048) or {+-}size{KMGTP}: Last sector (2048-131038, default = 131038) or {+-}size{KMGTP}: Current type is 'Linux filesystem'
Hex code or GUID (L to show codes, Enter = 8300): Changed type of partition to 'Linux filesystem'
Command (? for help):
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.hp7KFAzXki.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m Create new partition
GPT fdisk (gdisk) version 0.8.8
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help): Using 1
Enter name:
Command (? for help):
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.hp7KFAzXki.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m Change partition 1 name (Linux filesystem -> fOBMFIwQ)
GPT fdisk (gdisk) version 0.8.8
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help): Using 1
Current type is 'Linux filesystem'
Hex code or GUID (L to show codes, Enter = 8300): Changed type of partition to 'Linux swap'
Command (? for help):
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.hp7KFAzXki.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m Change partition 1 type (8300 -> 8200)
GPT fdisk (gdisk) version 0.8.8
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help): Enter backup filename to save: The operation has completed successfully.
Command (? for help):
[0;32m**SUCCESS**[m GPT data backuped sucessfully
GPT fdisk (gdisk) version 0.8.8
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help): Using 1
Command (? for help):
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.hp7KFAzXki.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m Delete partition 1
GPT fdisk (gdisk) version 0.8.8
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help):
Recovery/transformation command (? for help): b use backup GPT header (rebuilding main)
c load backup partition table from disk (rebuilding main)
d use main GPT header (rebuilding backup)
e load main partition table from disk (rebuilding backup)
f load MBR and build fresh GPT from it
g convert GPT into MBR and exit
h make hybrid MBR
i show detailed information on a partition
l load partition data from a backup file
m return to main menu
o print protective MBR data
p print the partition table
q quit without saving changes
t transform BSD disklabel partition
v verify disk
w write table to disk and exit
x extra functionality (experts only)
? print this menu
Recovery/transformation command (? for help): Enter backup filename to load:
Recovery/transformation command (? for help):
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.hp7KFAzXki.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m Restore the GPT backup
GPT fdisk (gdisk) version 0.8.8
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help):
Expert command (? for help): Enter the disk's unique GUID ('R' to randomize): The new disk GUID is 7BAC6259-B713-403E-AB6B-FD2F453C8C77
Expert command (? for help):
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.hp7KFAzXki.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m GUID of disk has been sucessfully changed
GPT fdisk (gdisk) version 0.8.8
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help):
Expert command (? for help): About to wipe out GPT on /tmp/tmp.hp7KFAzXki. Proceed? (Y/N): Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
GPT data structures destroyed! You may now partition the disk using fdisk or
other utilities.
Blank out MBR? (Y/N): [0;32m**SUCCESS**[m Wipe GPT table
Creating new GPT entries.
[0;32m**SUCCESS**[m EOF successfully exit gdisk
[0;34m**Testing sgdisk binary**[m
Creating new GPT entries.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m Create new empty GPT table
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m Create new partition
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m Change partition 1 name (Linux filesystem -> fOBMFIwQ)
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m Change partition 1 type (8300 -> 8200)
The operation has completed successfully.
[0;32m**SUCCESS**[m GPT data backuped sucessfully
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m Delete partition 1
GPT fdisk (gdisk) version 0.8.8
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help):
Recovery/transformation command (? for help): b use backup GPT header (rebuilding main)
c load backup partition table from disk (rebuilding main)
d use main GPT header (rebuilding backup)
e load main partition table from disk (rebuilding backup)
f load MBR and build fresh GPT from it
g convert GPT into MBR and exit
h make hybrid MBR
i show detailed information on a partition
l load partition data from a backup file
m return to main menu
o print protective MBR data
p print the partition table
q quit without saving changes
t transform BSD disklabel partition
v verify disk
w write table to disk and exit
x extra functionality (experts only)
? print this menu
Recovery/transformation command (? for help): Enter backup filename to load:
Recovery/transformation command (? for help):
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.hp7KFAzXki.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m Restore the GPT backup
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m GUID of disk has been sucessfully changed
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
GPT data structures destroyed! You may now partition the disk using fdisk or
other utilities.
[0;32m**SUCCESS**[m Wipe GPT table
Creating new GPT entries.
[0;32m**SUCCESS**[m EOF successfully exit gdisk
./gdisk_test.sh build-gdisk-noicu
65536+0 records in
65536+0 records out
67108864 bytes (67 MB) copied, 1.67215 s, 40.1 MB/s
[0;32m**SUCCESS**[m Temp disk sucessfully created
[0;34m**Testing gdisk binary**[m
GPT fdisk (gdisk) version 0.8.8
Partition table scan:
MBR: not present
BSD: not present
APM: not present
GPT: not present
Creating new GPT entries.
Command (? for help): This option deletes all partitions and creates a new protective MBR.
Proceed? (Y/N):
Command (? for help):
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.PERTOdbDyM.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m Create new empty GPT table
GPT fdisk (gdisk) version 0.8.8
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help): Partition number (1-128, default 1): First sector (34-131038, default = 2048) or {+-}size{KMGTP}: Last sector (2048-131038, default = 131038) or {+-}size{KMGTP}: Current type is 'Linux filesystem'
Hex code or GUID (L to show codes, Enter = 8300): Changed type of partition to 'Linux filesystem'
Command (? for help):
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.PERTOdbDyM.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m Create new partition
GPT fdisk (gdisk) version 0.8.8
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help): Using 1
Enter name:
Command (? for help):
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.PERTOdbDyM.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m Change partition 1 name (Linux filesystem -> cFoWGfly)
GPT fdisk (gdisk) version 0.8.8
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help): Using 1
Current type is 'Linux filesystem'
Hex code or GUID (L to show codes, Enter = 8300): Changed type of partition to 'Linux swap'
Command (? for help):
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.PERTOdbDyM.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m Change partition 1 type (8300 -> 8200)
GPT fdisk (gdisk) version 0.8.8
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help): Enter backup filename to save: The operation has completed successfully.
Command (? for help):
[0;32m**SUCCESS**[m GPT data backuped sucessfully
GPT fdisk (gdisk) version 0.8.8
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help): Using 1
Command (? for help):
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.PERTOdbDyM.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m Delete partition 1
GPT fdisk (gdisk) version 0.8.8
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help):
Recovery/transformation command (? for help): b use backup GPT header (rebuilding main)
c load backup partition table from disk (rebuilding main)
d use main GPT header (rebuilding backup)
e load main partition table from disk (rebuilding backup)
f load MBR and build fresh GPT from it
g convert GPT into MBR and exit
h make hybrid MBR
i show detailed information on a partition
l load partition data from a backup file
m return to main menu
o print protective MBR data
p print the partition table
q quit without saving changes
t transform BSD disklabel partition
v verify disk
w write table to disk and exit
x extra functionality (experts only)
? print this menu
Recovery/transformation command (? for help): Enter backup filename to load:
Recovery/transformation command (? for help):
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.PERTOdbDyM.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m Restore the GPT backup
GPT fdisk (gdisk) version 0.8.8
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help):
Expert command (? for help): Enter the disk's unique GUID ('R' to randomize): The new disk GUID is 18185AB9-9C6D-48D4-A117-E55717DE275B
Expert command (? for help):
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.PERTOdbDyM.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m GUID of disk has been sucessfully changed
GPT fdisk (gdisk) version 0.8.8
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help):
Expert command (? for help): About to wipe out GPT on /tmp/tmp.PERTOdbDyM. Proceed? (Y/N): Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
GPT data structures destroyed! You may now partition the disk using fdisk or
other utilities.
Blank out MBR? (Y/N): [0;32m**SUCCESS**[m Wipe GPT table
Creating new GPT entries.
[0;32m**SUCCESS**[m EOF successfully exit gdisk
[0;34m**Testing sgdisk binary**[m
Creating new GPT entries.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m Create new empty GPT table
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m Create new partition
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m Change partition 1 name (Linux filesystem -> cFoWGfly)
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m Change partition 1 type (8300 -> 8200)
The operation has completed successfully.
[0;32m**SUCCESS**[m GPT data backuped sucessfully
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m Delete partition 1
GPT fdisk (gdisk) version 0.8.8
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help):
Recovery/transformation command (? for help): b use backup GPT header (rebuilding main)
c load backup partition table from disk (rebuilding main)
d use main GPT header (rebuilding backup)
e load main partition table from disk (rebuilding backup)
f load MBR and build fresh GPT from it
g convert GPT into MBR and exit
h make hybrid MBR
i show detailed information on a partition
l load partition data from a backup file
m return to main menu
o print protective MBR data
p print the partition table
q quit without saving changes
t transform BSD disklabel partition
v verify disk
w write table to disk and exit
x extra functionality (experts only)
? print this menu
Recovery/transformation command (? for help): Enter backup filename to load:
Recovery/transformation command (? for help):
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): OK; writing new GUID partition table (GPT) to /tmp/tmp.PERTOdbDyM.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m Restore the GPT backup
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.
[0;32m**SUCCESS**[m GUID of disk has been sucessfully changed
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
GPT data structures destroyed! You may now partition the disk using fdisk or
other utilities.
[0;32m**SUCCESS**[m Wipe GPT table
Creating new GPT entries.
[0;32m**SUCCESS**[m EOF successfully exit gdisk
make[1]: Leaving directory `/«PKGBUILDDIR»'
fakeroot debian/rules binary-arch
dh binary-arch
dh_testroot -a
dh_prep -a
dh_installdirs -a
dh_auto_install -a
debian/rules override_dh_install
make[1]: Entering directory `/«PKGBUILDDIR»'
# gdisk
install -D build-gdisk/gdisk /«PKGBUILDDIR»/debian/gdisk/sbin/gdisk
install -D build-gdisk/sgdisk /«PKGBUILDDIR»/debian/gdisk/sbin/sgdisk
install -D build-gdisk/cgdisk /«PKGBUILDDIR»/debian/gdisk/sbin/cgdisk
install -D build-gdisk/fixparts /«PKGBUILDDIR»/debian/gdisk/sbin/fixparts
# gdisk-noicu
install -D build-gdisk-noicu/gdisk /«PKGBUILDDIR»/debian/gdisk-noicu/sbin/gdisk
install -D build-gdisk-noicu/sgdisk /«PKGBUILDDIR»/debian/gdisk-noicu/sbin/sgdisk
install -D build-gdisk-noicu/cgdisk /«PKGBUILDDIR»/debian/gdisk-noicu/sbin/cgdisk
install -D build-gdisk-noicu/fixparts /«PKGBUILDDIR»/debian/gdisk-noicu/sbin/fixparts
# install index page for doc-base
install -D debian/index.html /«PKGBUILDDIR»/debian/gdisk/usr/share/doc/gdisk/index.html
install -D debian/index.html /«PKGBUILDDIR»/debian/gdisk-noicu/usr/share/doc/gdisk-noicu/index.html
make[1]: Leaving directory `/«PKGBUILDDIR»'
dh_installdocs -a
dh_installchangelogs -a
dh_installman -a
dh_perl -a
dh_link -a
dh_compress -a
dh_fixperms -a
dh_strip -a
dh_makeshlibs -a
dh_shlibdeps -a
dh_installdeb -a
dh_gencontrol -a
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
dh_md5sums -a
dh_builddeb -a
dpkg-deb: building package `gdisk' in `../gdisk_0.8.8-1_armhf.deb'.
dpkg-deb: building package `gdisk-noicu' in `../gdisk-noicu_0.8.8-1_armhf.deb'.
dpkg-genchanges -B -mRaspbian wandboard test autobuilder <root@raspbian.org> >../gdisk_0.8.8-1_armhf.changes
dpkg-genchanges: arch-specific upload - not including arch-independent packages
dpkg-genchanges: binary-only upload - not including any source code
dpkg-source --after-build gdisk-0.8.8
dpkg-buildpackage: binary only upload (no source included)
────────────────────────────────────────────────────────────────────────────────
Build finished at 20140105-0540
Finished
────────
I: Built successfully
┌──────────────────────────────────────────────────────────────────────────────┐
│ Changes │
└──────────────────────────────────────────────────────────────────────────────┘
gdisk_0.8.8-1_armhf.changes:
────────────────────────────
Format: 1.8
Date: Fri, 20 Dec 2013 17:41:44 +0100
Source: gdisk
Binary: gdisk gdisk-noicu
Architecture: armhf
Version: 0.8.8-1
Distribution: jessie-staging
Urgency: low
Maintainer: Raspbian wandboard test autobuilder <root@raspbian.org>
Changed-By: Guillaume Delacour <gui@iroqwa.org>
Description:
gdisk - GPT fdisk text-mode partitioning tool
gdisk-noicu - GPT fdisk text-mode partitioning tool (without unicode support)
Closes: 729957 729958
Changes:
gdisk (0.8.8-1) unstable; urgency=low
.
* New upstream release (Closes: #729958)
* debian/patches/set_default_partition_type-test.diff don't use a kernel
dependent default gpt type when creating a partition (Closes: #729957)
* Bump to Standards-Version 3.9.5 (no changes needed)
* *.lintian-overrides: Removed as fixparts use fortified functions
* Refresh patch debian/patches/manpages.diff (hyphen as minus)
Checksums-Sha1:
d2882066e7216c2e7a11a366f6679cbe1ff566a3 185870 gdisk_0.8.8-1_armhf.deb
45314df6cfb199b338f38f1f9103723b340cc89c 185724 gdisk-noicu_0.8.8-1_armhf.deb
Checksums-Sha256:
554f3ef130d78fe8e1541fe7348e4a8c2c29d571c816ef691777a7dabcf4e57c 185870 gdisk_0.8.8-1_armhf.deb
319041d9d61b990238d48e6d23ce192b0f672cd37ccaa816ab2077d48d0afac7 185724 gdisk-noicu_0.8.8-1_armhf.deb
Files:
bff4b8ccd57438bdd4fdd3bec71e1767 185870 admin extra gdisk_0.8.8-1_armhf.deb
2d65d303856e788cab0740973cc94b9a 185724 admin extra gdisk-noicu_0.8.8-1_armhf.deb
┌──────────────────────────────────────────────────────────────────────────────┐
│ Package contents │
└──────────────────────────────────────────────────────────────────────────────┘
gdisk_0.8.8-1_armhf.deb
───────────────────────
new debian package, version 2.0.
size 185870 bytes: control archive=1174 bytes.
748 bytes, 19 lines control
1099 bytes, 18 lines md5sums
Package: gdisk
Version: 0.8.8-1
Architecture: armhf
Maintainer: Guillaume Delacour <gui@iroqwa.org>
Installed-Size: 740
Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.4.0), libicu52 (>= 52~m1-1~), libncurses5 (>= 5.5-5~), libpopt0 (>= 1.14), libstdc++6 (>= 4.4.0), libtinfo5, libuuid1 (>= 2.16)
Recommends: groff-base
Conflicts: gdisk-noicu
Section: admin
Priority: extra
Homepage: http://sourceforge.net/projects/gptfdisk/
Description: GPT fdisk text-mode partitioning tool
GPT fdisk (aka gdisk) is a text-mode partitioning
tool that works on Globally Unique Identifier
(GUID) Partition Table (GPT) disks, rather than
on the more common (through 2009)
Master Boot Record (MBR) partition tables.
.
Please note that gdisk is still in beta version.
drwxr-xr-x root/root 0 2014-01-05 05:39 ./
drwxr-xr-x root/root 0 2014-01-05 05:39 ./sbin/
-rwxr-xr-x root/root 186496 2014-01-05 05:39 ./sbin/gdisk
-rwxr-xr-x root/root 178340 2014-01-05 05:39 ./sbin/sgdisk
-rwxr-xr-x root/root 186616 2014-01-05 05:39 ./sbin/cgdisk
-rwxr-xr-x root/root 59384 2014-01-05 05:39 ./sbin/fixparts
drwxr-xr-x root/root 0 2014-01-05 05:39 ./usr/
drwxr-xr-x root/root 0 2014-01-05 05:39 ./usr/share/
drwxr-xr-x root/root 0 2014-01-05 05:39 ./usr/share/doc/
drwxr-xr-x root/root 0 2014-01-05 05:39 ./usr/share/doc/gdisk/
-rw-r--r-- root/root 266 2014-01-05 05:39 ./usr/share/doc/gdisk/index.html
-rw-r--r-- root/root 18056 2013-10-14 16:05 ./usr/share/doc/gdisk/cgdisk.html
-rw-r--r-- root/root 12600 2013-10-14 16:05 ./usr/share/doc/gdisk/fixparts.html
-rw-r--r-- root/root 30794 2013-10-14 16:05 ./usr/share/doc/gdisk/gdisk.html
-rw-r--r-- root/root 28903 2013-10-14 16:05 ./usr/share/doc/gdisk/sgdisk.html
-rw-r--r-- root/root 1228 2013-06-03 19:35 ./usr/share/doc/gdisk/copyright
-rw-r--r-- root/root 5354 2013-10-14 16:05 ./usr/share/doc/gdisk/README.gz
-rw-r--r-- root/root 16345 2013-10-14 16:05 ./usr/share/doc/gdisk/NEWS.gz
-rw-r--r-- root/root 1860 2013-12-20 16:42 ./usr/share/doc/gdisk/changelog.Debian.gz
drwxr-xr-x root/root 0 2014-01-05 05:39 ./usr/share/doc-base/
-rw-r--r-- root/root 239 2013-06-03 19:35 ./usr/share/doc-base/gdisk
drwxr-xr-x root/root 0 2014-01-05 05:39 ./usr/share/man/
drwxr-xr-x root/root 0 2014-01-05 05:39 ./usr/share/man/man8/
-rw-r--r-- root/root 10009 2014-01-05 05:39 ./usr/share/man/man8/gdisk.8.gz
-rw-r--r-- root/root 9906 2014-01-05 05:39 ./usr/share/man/man8/sgdisk.8.gz
-rw-r--r-- root/root 4375 2014-01-05 05:39 ./usr/share/man/man8/fixparts.8.gz
-rw-r--r-- root/root 6466 2014-01-05 05:39 ./usr/share/man/man8/cgdisk.8.gz
gdisk-noicu_0.8.8-1_armhf.deb
─────────────────────────────
new debian package, version 2.0.
size 185724 bytes: control archive=1259 bytes.
913 bytes, 25 lines control
1159 bytes, 18 lines md5sums
Package: gdisk-noicu
Source: gdisk
Version: 0.8.8-1
Architecture: armhf
Maintainer: Guillaume Delacour <gui@iroqwa.org>
Installed-Size: 737
Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.4.0), libncurses5 (>= 5.5-5~), libpopt0 (>= 1.14), libstdc++6 (>= 4.4.0), libtinfo5, libuuid1 (>= 2.16)
Recommends: groff-base
Conflicts: gdisk
Provides: gdisk
Section: admin
Priority: extra
Homepage: http://sourceforge.net/projects/gptfdisk/
Description: GPT fdisk text-mode partitioning tool (without unicode support)
GPT fdisk (aka gdisk) is a text-mode partitioning
tool that works on Globally Unique Identifier
(GUID) Partition Table (GPT) disks, rather than
on the more common (through 2009)
Master Boot Record (MBR) partition tables.
.
This package is not built with Unicode, for
space-constrained systems. For Unicode support,
please install the gdisk package.
.
Please note that gdisk is still in beta version.
drwxr-xr-x root/root 0 2014-01-05 05:39 ./
drwxr-xr-x root/root 0 2014-01-05 05:39 ./sbin/
-rwxr-xr-x root/root 186452 2014-01-05 05:39 ./sbin/gdisk
-rwxr-xr-x root/root 174904 2014-01-05 05:39 ./sbin/sgdisk
-rwxr-xr-x root/root 186564 2014-01-05 05:39 ./sbin/cgdisk
-rwxr-xr-x root/root 59384 2014-01-05 05:39 ./sbin/fixparts
drwxr-xr-x root/root 0 2014-01-05 05:39 ./usr/
drwxr-xr-x root/root 0 2014-01-05 05:39 ./usr/share/
drwxr-xr-x root/root 0 2014-01-05 05:39 ./usr/share/doc/
drwxr-xr-x root/root 0 2014-01-05 05:39 ./usr/share/doc/gdisk-noicu/
-rw-r--r-- root/root 266 2014-01-05 05:39 ./usr/share/doc/gdisk-noicu/index.html
-rw-r--r-- root/root 18056 2013-10-14 16:05 ./usr/share/doc/gdisk-noicu/cgdisk.html
-rw-r--r-- root/root 12600 2013-10-14 16:05 ./usr/share/doc/gdisk-noicu/fixparts.html
-rw-r--r-- root/root 30794 2013-10-14 16:05 ./usr/share/doc/gdisk-noicu/gdisk.html
-rw-r--r-- root/root 28903 2013-10-14 16:05 ./usr/share/doc/gdisk-noicu/sgdisk.html
-rw-r--r-- root/root 1228 2013-06-03 19:35 ./usr/share/doc/gdisk-noicu/copyright
-rw-r--r-- root/root 5354 2013-10-14 16:05 ./usr/share/doc/gdisk-noicu/README.gz
-rw-r--r-- root/root 16345 2013-10-14 16:05 ./usr/share/doc/gdisk-noicu/NEWS.gz
-rw-r--r-- root/root 1860 2013-12-20 16:42 ./usr/share/doc/gdisk-noicu/changelog.Debian.gz
drwxr-xr-x root/root 0 2014-01-05 05:39 ./usr/share/doc-base/
-rw-r--r-- root/root 257 2013-06-10 19:48 ./usr/share/doc-base/gdisk-noicu
drwxr-xr-x root/root 0 2014-01-05 05:39 ./usr/share/man/
drwxr-xr-x root/root 0 2014-01-05 05:39 ./usr/share/man/man8/
-rw-r--r-- root/root 10009 2014-01-05 05:39 ./usr/share/man/man8/gdisk.8.gz
-rw-r--r-- root/root 9906 2014-01-05 05:39 ./usr/share/man/man8/sgdisk.8.gz
-rw-r--r-- root/root 4375 2014-01-05 05:39 ./usr/share/man/man8/fixparts.8.gz
-rw-r--r-- root/root 6466 2014-01-05 05:39 ./usr/share/man/man8/cgdisk.8.gz
┌──────────────────────────────────────────────────────────────────────────────┐
│ Post Build │
└──────────────────────────────────────────────────────────────────────────────┘
┌──────────────────────────────────────────────────────────────────────────────┐
│ Cleanup │
└──────────────────────────────────────────────────────────────────────────────┘
Purging /«BUILDDIR»
Not cleaning session: cloned chroot in use
┌──────────────────────────────────────────────────────────────────────────────┐
│ Summary │
└──────────────────────────────────────────────────────────────────────────────┘
Build Architecture: armhf
Build-Space: 15024
Build-Time: 281
Distribution: jessie-staging
Host Architecture: armhf
Install-Time: 170
Job: gdisk_0.8.8-1
Machine Architecture: armhf
Package: gdisk
Package-Time: 503
Source-Version: 0.8.8-1
Space: 15024
Status: successful
Version: 0.8.8-1
────────────────────────────────────────────────────────────────────────────────
Finished at 20140105-0540
Build needed 00:08:23, 15024k disc space