bmon →
1:4.0-7 →
armhf → 2020-11-25 06:00:04
sbuild (Debian sbuild) 0.78.1 (09 February 2019) on test2019
+==============================================================================+
| bmon 1:4.0-7 (armhf) Wed, 25 Nov 2020 05:53:40 +0000 |
+==============================================================================+
Package: bmon
Version: 1:4.0-7
Source Version: 1:4.0-7
Distribution: bullseye-staging
Machine Architecture: armhf
Host Architecture: armhf
Build Architecture: armhf
Build Type: any
I: NOTICE: Log filtering will replace 'var/run/schroot/mount/bullseye-staging-armhf-sbuild-bfd4ebc2-8b00-4525-9c5a-6cc50f8ccd39' with '<<CHROOT>>'
I: NOTICE: Log filtering will replace 'build/bmon-GPjfRt/resolver-Ksegxq' with '<<RESOLVERDIR>>'
+------------------------------------------------------------------------------+
| Update chroot |
+------------------------------------------------------------------------------+
Get:1 http://172.17.0.1/private bullseye-staging InRelease [11.3 kB]
Get:2 http://172.17.0.1/private bullseye-staging/main Sources [11.9 MB]
Get:3 http://172.17.0.1/private bullseye-staging/main armhf Packages [12.9 MB]
Fetched 24.8 MB in 10s (2527 kB/s)
Reading package lists...
+------------------------------------------------------------------------------+
| Fetch source files |
+------------------------------------------------------------------------------+
Check APT
---------
Checking available source versions...
Download source files with APT
------------------------------
Reading package lists...
Need to get 58.1 kB of source archives.
Get:1 http://172.17.0.1/private bullseye-staging/main bmon 1:4.0-7 (dsc) [1806 B]
Get:2 http://172.17.0.1/private bullseye-staging/main bmon 1:4.0-7 (tar) [51.9 kB]
Get:3 http://172.17.0.1/private bullseye-staging/main bmon 1:4.0-7 (diff) [4456 B]
Fetched 58.1 kB in 0s (190 kB/s)
Download complete and in download only mode
I: NOTICE: Log filtering will replace 'build/bmon-GPjfRt/bmon-4.0' with '<<PKGBUILDDIR>>'
I: NOTICE: Log filtering will replace 'build/bmon-GPjfRt' with '<<BUILDDIR>>'
+------------------------------------------------------------------------------+
| Install package build dependencies |
+------------------------------------------------------------------------------+
Setup apt archive
-----------------
Merged Build-Depends: debhelper-compat (= 13), libconfuse-dev, libnl-3-dev, libnl-route-3-dev, libncurses5-dev, librrd-dev, pkg-config, build-essential, fakeroot
Filtered Build-Depends: debhelper-compat (= 13), libconfuse-dev, libnl-3-dev, libnl-route-3-dev, libncurses5-dev, librrd-dev, pkg-config, build-essential, fakeroot
dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-main-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [957 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [429 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [492 B]
Fetched 1878 B in 0s (22.7 kB/s)
Reading package lists...
Reading package lists...
Install main build dependencies (apt-based resolver)
----------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
autoconf automake autopoint autotools-dev bsdextrautils debhelper
dh-autoreconf dh-strip-nondeterminism dwz file fontconfig fontconfig-config
fonts-dejavu-core gettext gettext-base groff-base intltool-debian
libarchive-zip-perl libbrotli1 libbsd0 libcairo2 libconfuse-common
libconfuse-dev libconfuse2 libcroco3 libdatrie1 libdbi1 libdebhelper-perl
libelf1 libexpat1 libfile-stripnondeterminism-perl libfontconfig1
libfreetype6 libfribidi0 libglib2.0-0 libgraphite2-3 libharfbuzz0b libicu67
libmagic-mgc libmagic1 libncurses-dev libncurses5-dev libncurses6
libnl-3-200 libnl-3-dev libnl-route-3-200 libnl-route-3-dev libpango-1.0-0
libpangocairo-1.0-0 libpangoft2-1.0-0 libpipeline1 libpixman-1-0 libpng16-16
librrd-dev librrd8 libsigsegv2 libsub-override-perl libthai-data libthai0
libtool libuchardet0 libx11-6 libx11-data libxau6 libxcb-render0 libxcb-shm0
libxcb1 libxdmcp6 libxext6 libxml2 libxrender1 m4 man-db pkg-config
po-debconf sensible-utils ucf
Suggested packages:
autoconf-archive gnu-standards autoconf-doc dh-make gettext-doc
libasprintf-dev libgettextpo-dev groff ncurses-doc libtool-doc gfortran
| fortran95-compiler gcj-jdk m4-doc apparmor less www-browser
libmail-box-perl
Recommended packages:
curl | wget | lynx libconfuse-doc libarchive-cpio-perl libglib2.0-data
shared-mime-info xdg-user-dirs libgpm2 libltdl-dev libmail-sendmail-perl
The following NEW packages will be installed:
autoconf automake autopoint autotools-dev bsdextrautils debhelper
dh-autoreconf dh-strip-nondeterminism dwz file fontconfig fontconfig-config
fonts-dejavu-core gettext gettext-base groff-base intltool-debian
libarchive-zip-perl libbrotli1 libbsd0 libcairo2 libconfuse-common
libconfuse-dev libconfuse2 libcroco3 libdatrie1 libdbi1 libdebhelper-perl
libelf1 libexpat1 libfile-stripnondeterminism-perl libfontconfig1
libfreetype6 libfribidi0 libglib2.0-0 libgraphite2-3 libharfbuzz0b libicu67
libmagic-mgc libmagic1 libncurses-dev libncurses5-dev libncurses6
libnl-3-200 libnl-3-dev libnl-route-3-200 libnl-route-3-dev libpango-1.0-0
libpangocairo-1.0-0 libpangoft2-1.0-0 libpipeline1 libpixman-1-0 libpng16-16
librrd-dev librrd8 libsigsegv2 libsub-override-perl libthai-data libthai0
libtool libuchardet0 libx11-6 libx11-data libxau6 libxcb-render0 libxcb-shm0
libxcb1 libxdmcp6 libxext6 libxml2 libxrender1 m4 man-db pkg-config
po-debconf sbuild-build-depends-main-dummy sensible-utils ucf
0 upgraded, 78 newly installed, 0 to remove and 13 not upgraded.
Need to get 27.8 MB of archives.
After this operation, 91.0 MB of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [912 B]
Get:2 http://172.17.0.1/private bullseye-staging/main armhf bsdextrautils armhf 2.36.1-1 [133 kB]
Get:3 http://172.17.0.1/private bullseye-staging/main armhf libuchardet0 armhf 0.0.7-1 [65.0 kB]
Get:4 http://172.17.0.1/private bullseye-staging/main armhf groff-base armhf 1.22.4-5 [783 kB]
Get:5 http://172.17.0.1/private bullseye-staging/main armhf libpipeline1 armhf 1.5.3-1 [29.9 kB]
Get:6 http://172.17.0.1/private bullseye-staging/main armhf man-db armhf 2.9.3-2 [1269 kB]
Get:7 http://172.17.0.1/private bullseye-staging/main armhf sensible-utils all 0.0.12+nmu1 [16.0 kB]
Get:8 http://172.17.0.1/private bullseye-staging/main armhf libmagic-mgc armhf 1:5.38-5 [262 kB]
Get:9 http://172.17.0.1/private bullseye-staging/main armhf libmagic1 armhf 1:5.38-5 [113 kB]
Get:10 http://172.17.0.1/private bullseye-staging/main armhf file armhf 1:5.38-5 [67.0 kB]
Get:11 http://172.17.0.1/private bullseye-staging/main armhf gettext-base armhf 0.19.8.1-10 [117 kB]
Get:12 http://172.17.0.1/private bullseye-staging/main armhf ucf all 3.0043 [74.0 kB]
Get:13 http://172.17.0.1/private bullseye-staging/main armhf libsigsegv2 armhf 2.12-2 [32.3 kB]
Get:14 http://172.17.0.1/private bullseye-staging/main armhf m4 armhf 1.4.18-4 [185 kB]
Get:15 http://172.17.0.1/private bullseye-staging/main armhf autoconf all 2.69-11.1 [341 kB]
Get:16 http://172.17.0.1/private bullseye-staging/main armhf autotools-dev all 20180224.1 [77.0 kB]
Get:17 http://172.17.0.1/private bullseye-staging/main armhf automake all 1:1.16.2-4 [801 kB]
Get:18 http://172.17.0.1/private bullseye-staging/main armhf autopoint all 0.19.8.1-10 [435 kB]
Get:19 http://172.17.0.1/private bullseye-staging/main armhf libtool all 2.4.6-14 [513 kB]
Get:20 http://172.17.0.1/private bullseye-staging/main armhf dh-autoreconf all 19 [16.9 kB]
Get:21 http://172.17.0.1/private bullseye-staging/main armhf libdebhelper-perl all 13.2.1 [188 kB]
Get:22 http://172.17.0.1/private bullseye-staging/main armhf libarchive-zip-perl all 1.68-1 [104 kB]
Get:23 http://172.17.0.1/private bullseye-staging/main armhf libsub-override-perl all 0.09-2 [10.2 kB]
Get:24 http://172.17.0.1/private bullseye-staging/main armhf libfile-stripnondeterminism-perl all 1.9.0-1 [25.5 kB]
Get:25 http://172.17.0.1/private bullseye-staging/main armhf dh-strip-nondeterminism all 1.9.0-1 [15.2 kB]
Get:26 http://172.17.0.1/private bullseye-staging/main armhf libelf1 armhf 0.182-1 [162 kB]
Get:27 http://172.17.0.1/private bullseye-staging/main armhf dwz armhf 0.13-5 [142 kB]
Get:28 http://172.17.0.1/private bullseye-staging/main armhf libglib2.0-0 armhf 2.66.3-1 [1176 kB]
Get:29 http://172.17.0.1/private bullseye-staging/main armhf libicu67 armhf 67.1-4 [8289 kB]
Get:30 http://172.17.0.1/private bullseye-staging/main armhf libxml2 armhf 2.9.10+dfsg-6.2 [578 kB]
Get:31 http://172.17.0.1/private bullseye-staging/main armhf libcroco3 armhf 0.6.13-1 [133 kB]
Get:32 http://172.17.0.1/private bullseye-staging/main armhf gettext armhf 0.19.8.1-10 [1219 kB]
Get:33 http://172.17.0.1/private bullseye-staging/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB]
Get:34 http://172.17.0.1/private bullseye-staging/main armhf po-debconf all 1.0.21 [248 kB]
Get:35 http://172.17.0.1/private bullseye-staging/main armhf debhelper all 13.2.1 [1007 kB]
Get:36 http://172.17.0.1/private bullseye-staging/main armhf libexpat1 armhf 2.2.10-1 [73.3 kB]
Get:37 http://172.17.0.1/private bullseye-staging/main armhf libbrotli1 armhf 1.0.9-2 [259 kB]
Get:38 http://172.17.0.1/private bullseye-staging/main armhf libpng16-16 armhf 1.6.37-3 [276 kB]
Get:39 http://172.17.0.1/private bullseye-staging/main armhf libfreetype6 armhf 2.10.2+dfsg-4 [345 kB]
Get:40 http://172.17.0.1/private bullseye-staging/main armhf fonts-dejavu-core all 2.37-2 [1069 kB]
Get:41 http://172.17.0.1/private bullseye-staging/main armhf fontconfig-config all 2.13.1-4.2 [281 kB]
Get:42 http://172.17.0.1/private bullseye-staging/main armhf libfontconfig1 armhf 2.13.1-4.2 [328 kB]
Get:43 http://172.17.0.1/private bullseye-staging/main armhf fontconfig armhf 2.13.1-4.2 [416 kB]
Get:44 http://172.17.0.1/private bullseye-staging/main armhf libbsd0 armhf 0.10.0-1 [112 kB]
Get:45 http://172.17.0.1/private bullseye-staging/main armhf libpixman-1-0 armhf 0.36.0-1 [458 kB]
Get:46 http://172.17.0.1/private bullseye-staging/main armhf libxau6 armhf 1:1.0.8-1+b2 [19.1 kB]
Get:47 http://172.17.0.1/private bullseye-staging/main armhf libxdmcp6 armhf 1:1.1.2-3 [25.0 kB]
Get:48 http://172.17.0.1/private bullseye-staging/main armhf libxcb1 armhf 1.14-2 [135 kB]
Get:49 http://172.17.0.1/private bullseye-staging/main armhf libx11-data all 2:1.6.12-1 [311 kB]
Get:50 http://172.17.0.1/private bullseye-staging/main armhf libx11-6 armhf 2:1.6.12-1 [700 kB]
Get:51 http://172.17.0.1/private bullseye-staging/main armhf libxcb-render0 armhf 1.14-2 [110 kB]
Get:52 http://172.17.0.1/private bullseye-staging/main armhf libxcb-shm0 armhf 1.14-2 [101 kB]
Get:53 http://172.17.0.1/private bullseye-staging/main armhf libxext6 armhf 2:1.3.3-1+b2 [47.8 kB]
Get:54 http://172.17.0.1/private bullseye-staging/main armhf libxrender1 armhf 1:0.9.10-1 [29.9 kB]
Get:55 http://172.17.0.1/private bullseye-staging/main armhf libcairo2 armhf 1.16.0-4 [599 kB]
Get:56 http://172.17.0.1/private bullseye-staging/main armhf libconfuse-common all 3.3-1 [13.1 kB]
Get:57 http://172.17.0.1/private bullseye-staging/main armhf libconfuse2 armhf 3.3-1 [29.1 kB]
Get:58 http://172.17.0.1/private bullseye-staging/main armhf libconfuse-dev armhf 3.3-1 [36.9 kB]
Get:59 http://172.17.0.1/private bullseye-staging/main armhf libdatrie1 armhf 0.2.12-3+b5 [36.5 kB]
Get:60 http://172.17.0.1/private bullseye-staging/main armhf libdbi1 armhf 0.9.0-5 [27.0 kB]
Get:61 http://172.17.0.1/private bullseye-staging/main armhf libfribidi0 armhf 1.0.8-2 [63.5 kB]
Get:62 http://172.17.0.1/private bullseye-staging/main armhf libgraphite2-3 armhf 1.3.14-1 [70.3 kB]
Get:63 http://172.17.0.1/private bullseye-staging/main armhf libharfbuzz0b armhf 2.6.7-1 [1366 kB]
Get:64 http://172.17.0.1/private bullseye-staging/main armhf libncurses6 armhf 6.2+20200918-1 [79.5 kB]
Get:65 http://172.17.0.1/private bullseye-staging/main armhf libncurses-dev armhf 6.2+20200918-1 [290 kB]
Get:66 http://172.17.0.1/private bullseye-staging/main armhf libncurses5-dev armhf 6.2+20200918-1 [940 B]
Get:67 http://172.17.0.1/private bullseye-staging/main armhf libnl-3-200 armhf 3.4.0-1 [55.0 kB]
Get:68 http://172.17.0.1/private bullseye-staging/main armhf libnl-3-dev armhf 3.4.0-1 [92.4 kB]
Get:69 http://172.17.0.1/private bullseye-staging/main armhf libnl-route-3-200 armhf 3.4.0-1 [132 kB]
Get:70 http://172.17.0.1/private bullseye-staging/main armhf libnl-route-3-dev armhf 3.4.0-1 [145 kB]
Get:71 http://172.17.0.1/private bullseye-staging/main armhf libthai-data all 0.1.28-3 [170 kB]
Get:72 http://172.17.0.1/private bullseye-staging/main armhf libthai0 armhf 0.1.28-3 [51.0 kB]
Get:73 http://172.17.0.1/private bullseye-staging/main armhf libpango-1.0-0 armhf 1.46.2-3 [172 kB]
Get:74 http://172.17.0.1/private bullseye-staging/main armhf libpangoft2-1.0-0 armhf 1.46.2-3 [55.7 kB]
Get:75 http://172.17.0.1/private bullseye-staging/main armhf libpangocairo-1.0-0 armhf 1.46.2-3 [46.7 kB]
Get:76 http://172.17.0.1/private bullseye-staging/main armhf librrd8 armhf 1.7.2-3+b2 [232 kB]
Get:77 http://172.17.0.1/private bullseye-staging/main armhf librrd-dev armhf 1.7.2-3+b2 [256 kB]
Get:78 http://172.17.0.1/private bullseye-staging/main armhf pkg-config armhf 0.29.2-1 [61.5 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 27.8 MB in 4s (6471 kB/s)
Selecting previously unselected package bsdextrautils.
(Reading database ... 12445 files and directories currently installed.)
Preparing to unpack .../00-bsdextrautils_2.36.1-1_armhf.deb ...
Unpacking bsdextrautils (2.36.1-1) ...
Selecting previously unselected package libuchardet0:armhf.
Preparing to unpack .../01-libuchardet0_0.0.7-1_armhf.deb ...
Unpacking libuchardet0:armhf (0.0.7-1) ...
Selecting previously unselected package groff-base.
Preparing to unpack .../02-groff-base_1.22.4-5_armhf.deb ...
Unpacking groff-base (1.22.4-5) ...
Selecting previously unselected package libpipeline1:armhf.
Preparing to unpack .../03-libpipeline1_1.5.3-1_armhf.deb ...
Unpacking libpipeline1:armhf (1.5.3-1) ...
Selecting previously unselected package man-db.
Preparing to unpack .../04-man-db_2.9.3-2_armhf.deb ...
Unpacking man-db (2.9.3-2) ...
Selecting previously unselected package sensible-utils.
Preparing to unpack .../05-sensible-utils_0.0.12+nmu1_all.deb ...
Unpacking sensible-utils (0.0.12+nmu1) ...
Selecting previously unselected package libmagic-mgc.
Preparing to unpack .../06-libmagic-mgc_1%3a5.38-5_armhf.deb ...
Unpacking libmagic-mgc (1:5.38-5) ...
Selecting previously unselected package libmagic1:armhf.
Preparing to unpack .../07-libmagic1_1%3a5.38-5_armhf.deb ...
Unpacking libmagic1:armhf (1:5.38-5) ...
Selecting previously unselected package file.
Preparing to unpack .../08-file_1%3a5.38-5_armhf.deb ...
Unpacking file (1:5.38-5) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../09-gettext-base_0.19.8.1-10_armhf.deb ...
Unpacking gettext-base (0.19.8.1-10) ...
Selecting previously unselected package ucf.
Preparing to unpack .../10-ucf_3.0043_all.deb ...
Moving old data out of the way
Unpacking ucf (3.0043) ...
Selecting previously unselected package libsigsegv2:armhf.
Preparing to unpack .../11-libsigsegv2_2.12-2_armhf.deb ...
Unpacking libsigsegv2:armhf (2.12-2) ...
Selecting previously unselected package m4.
Preparing to unpack .../12-m4_1.4.18-4_armhf.deb ...
Unpacking m4 (1.4.18-4) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../13-autoconf_2.69-11.1_all.deb ...
Unpacking autoconf (2.69-11.1) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../14-autotools-dev_20180224.1_all.deb ...
Unpacking autotools-dev (20180224.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../15-automake_1%3a1.16.2-4_all.deb ...
Unpacking automake (1:1.16.2-4) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../16-autopoint_0.19.8.1-10_all.deb ...
Unpacking autopoint (0.19.8.1-10) ...
Selecting previously unselected package libtool.
Preparing to unpack .../17-libtool_2.4.6-14_all.deb ...
Unpacking libtool (2.4.6-14) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../18-dh-autoreconf_19_all.deb ...
Unpacking dh-autoreconf (19) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../19-libdebhelper-perl_13.2.1_all.deb ...
Unpacking libdebhelper-perl (13.2.1) ...
Selecting previously unselected package libarchive-zip-perl.
Preparing to unpack .../20-libarchive-zip-perl_1.68-1_all.deb ...
Unpacking libarchive-zip-perl (1.68-1) ...
Selecting previously unselected package libsub-override-perl.
Preparing to unpack .../21-libsub-override-perl_0.09-2_all.deb ...
Unpacking libsub-override-perl (0.09-2) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../22-libfile-stripnondeterminism-perl_1.9.0-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.9.0-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../23-dh-strip-nondeterminism_1.9.0-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.9.0-1) ...
Selecting previously unselected package libelf1:armhf.
Preparing to unpack .../24-libelf1_0.182-1_armhf.deb ...
Unpacking libelf1:armhf (0.182-1) ...
Selecting previously unselected package dwz.
Preparing to unpack .../25-dwz_0.13-5_armhf.deb ...
Unpacking dwz (0.13-5) ...
Selecting previously unselected package libglib2.0-0:armhf.
Preparing to unpack .../26-libglib2.0-0_2.66.3-1_armhf.deb ...
Unpacking libglib2.0-0:armhf (2.66.3-1) ...
Selecting previously unselected package libicu67:armhf.
Preparing to unpack .../27-libicu67_67.1-4_armhf.deb ...
Unpacking libicu67:armhf (67.1-4) ...
Selecting previously unselected package libxml2:armhf.
Preparing to unpack .../28-libxml2_2.9.10+dfsg-6.2_armhf.deb ...
Unpacking libxml2:armhf (2.9.10+dfsg-6.2) ...
Selecting previously unselected package libcroco3:armhf.
Preparing to unpack .../29-libcroco3_0.6.13-1_armhf.deb ...
Unpacking libcroco3:armhf (0.6.13-1) ...
Selecting previously unselected package gettext.
Preparing to unpack .../30-gettext_0.19.8.1-10_armhf.deb ...
Unpacking gettext (0.19.8.1-10) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../31-intltool-debian_0.35.0+20060710.5_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.5) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../32-po-debconf_1.0.21_all.deb ...
Unpacking po-debconf (1.0.21) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../33-debhelper_13.2.1_all.deb ...
Unpacking debhelper (13.2.1) ...
Selecting previously unselected package libexpat1:armhf.
Preparing to unpack .../34-libexpat1_2.2.10-1_armhf.deb ...
Unpacking libexpat1:armhf (2.2.10-1) ...
Selecting previously unselected package libbrotli1:armhf.
Preparing to unpack .../35-libbrotli1_1.0.9-2_armhf.deb ...
Unpacking libbrotli1:armhf (1.0.9-2) ...
Selecting previously unselected package libpng16-16:armhf.
Preparing to unpack .../36-libpng16-16_1.6.37-3_armhf.deb ...
Unpacking libpng16-16:armhf (1.6.37-3) ...
Selecting previously unselected package libfreetype6:armhf.
Preparing to unpack .../37-libfreetype6_2.10.2+dfsg-4_armhf.deb ...
Unpacking libfreetype6:armhf (2.10.2+dfsg-4) ...
Selecting previously unselected package fonts-dejavu-core.
Preparing to unpack .../38-fonts-dejavu-core_2.37-2_all.deb ...
Unpacking fonts-dejavu-core (2.37-2) ...
Selecting previously unselected package fontconfig-config.
Preparing to unpack .../39-fontconfig-config_2.13.1-4.2_all.deb ...
Unpacking fontconfig-config (2.13.1-4.2) ...
Selecting previously unselected package libfontconfig1:armhf.
Preparing to unpack .../40-libfontconfig1_2.13.1-4.2_armhf.deb ...
Unpacking libfontconfig1:armhf (2.13.1-4.2) ...
Selecting previously unselected package fontconfig.
Preparing to unpack .../41-fontconfig_2.13.1-4.2_armhf.deb ...
Unpacking fontconfig (2.13.1-4.2) ...
Selecting previously unselected package libbsd0:armhf.
Preparing to unpack .../42-libbsd0_0.10.0-1_armhf.deb ...
Unpacking libbsd0:armhf (0.10.0-1) ...
Selecting previously unselected package libpixman-1-0:armhf.
Preparing to unpack .../43-libpixman-1-0_0.36.0-1_armhf.deb ...
Unpacking libpixman-1-0:armhf (0.36.0-1) ...
Selecting previously unselected package libxau6:armhf.
Preparing to unpack .../44-libxau6_1%3a1.0.8-1+b2_armhf.deb ...
Unpacking libxau6:armhf (1:1.0.8-1+b2) ...
Selecting previously unselected package libxdmcp6:armhf.
Preparing to unpack .../45-libxdmcp6_1%3a1.1.2-3_armhf.deb ...
Unpacking libxdmcp6:armhf (1:1.1.2-3) ...
Selecting previously unselected package libxcb1:armhf.
Preparing to unpack .../46-libxcb1_1.14-2_armhf.deb ...
Unpacking libxcb1:armhf (1.14-2) ...
Selecting previously unselected package libx11-data.
Preparing to unpack .../47-libx11-data_2%3a1.6.12-1_all.deb ...
Unpacking libx11-data (2:1.6.12-1) ...
Selecting previously unselected package libx11-6:armhf.
Preparing to unpack .../48-libx11-6_2%3a1.6.12-1_armhf.deb ...
Unpacking libx11-6:armhf (2:1.6.12-1) ...
Selecting previously unselected package libxcb-render0:armhf.
Preparing to unpack .../49-libxcb-render0_1.14-2_armhf.deb ...
Unpacking libxcb-render0:armhf (1.14-2) ...
Selecting previously unselected package libxcb-shm0:armhf.
Preparing to unpack .../50-libxcb-shm0_1.14-2_armhf.deb ...
Unpacking libxcb-shm0:armhf (1.14-2) ...
Selecting previously unselected package libxext6:armhf.
Preparing to unpack .../51-libxext6_2%3a1.3.3-1+b2_armhf.deb ...
Unpacking libxext6:armhf (2:1.3.3-1+b2) ...
Selecting previously unselected package libxrender1:armhf.
Preparing to unpack .../52-libxrender1_1%3a0.9.10-1_armhf.deb ...
Unpacking libxrender1:armhf (1:0.9.10-1) ...
Selecting previously unselected package libcairo2:armhf.
Preparing to unpack .../53-libcairo2_1.16.0-4_armhf.deb ...
Unpacking libcairo2:armhf (1.16.0-4) ...
Selecting previously unselected package libconfuse-common.
Preparing to unpack .../54-libconfuse-common_3.3-1_all.deb ...
Unpacking libconfuse-common (3.3-1) ...
Selecting previously unselected package libconfuse2:armhf.
Preparing to unpack .../55-libconfuse2_3.3-1_armhf.deb ...
Unpacking libconfuse2:armhf (3.3-1) ...
Selecting previously unselected package libconfuse-dev:armhf.
Preparing to unpack .../56-libconfuse-dev_3.3-1_armhf.deb ...
Unpacking libconfuse-dev:armhf (3.3-1) ...
Selecting previously unselected package libdatrie1:armhf.
Preparing to unpack .../57-libdatrie1_0.2.12-3+b5_armhf.deb ...
Unpacking libdatrie1:armhf (0.2.12-3+b5) ...
Selecting previously unselected package libdbi1:armhf.
Preparing to unpack .../58-libdbi1_0.9.0-5_armhf.deb ...
Unpacking libdbi1:armhf (0.9.0-5) ...
Selecting previously unselected package libfribidi0:armhf.
Preparing to unpack .../59-libfribidi0_1.0.8-2_armhf.deb ...
Unpacking libfribidi0:armhf (1.0.8-2) ...
Selecting previously unselected package libgraphite2-3:armhf.
Preparing to unpack .../60-libgraphite2-3_1.3.14-1_armhf.deb ...
Unpacking libgraphite2-3:armhf (1.3.14-1) ...
Selecting previously unselected package libharfbuzz0b:armhf.
Preparing to unpack .../61-libharfbuzz0b_2.6.7-1_armhf.deb ...
Unpacking libharfbuzz0b:armhf (2.6.7-1) ...
Selecting previously unselected package libncurses6:armhf.
Preparing to unpack .../62-libncurses6_6.2+20200918-1_armhf.deb ...
Unpacking libncurses6:armhf (6.2+20200918-1) ...
Selecting previously unselected package libncurses-dev:armhf.
Preparing to unpack .../63-libncurses-dev_6.2+20200918-1_armhf.deb ...
Unpacking libncurses-dev:armhf (6.2+20200918-1) ...
Selecting previously unselected package libncurses5-dev:armhf.
Preparing to unpack .../64-libncurses5-dev_6.2+20200918-1_armhf.deb ...
Unpacking libncurses5-dev:armhf (6.2+20200918-1) ...
Selecting previously unselected package libnl-3-200:armhf.
Preparing to unpack .../65-libnl-3-200_3.4.0-1_armhf.deb ...
Unpacking libnl-3-200:armhf (3.4.0-1) ...
Selecting previously unselected package libnl-3-dev:armhf.
Preparing to unpack .../66-libnl-3-dev_3.4.0-1_armhf.deb ...
Unpacking libnl-3-dev:armhf (3.4.0-1) ...
Selecting previously unselected package libnl-route-3-200:armhf.
Preparing to unpack .../67-libnl-route-3-200_3.4.0-1_armhf.deb ...
Unpacking libnl-route-3-200:armhf (3.4.0-1) ...
Selecting previously unselected package libnl-route-3-dev:armhf.
Preparing to unpack .../68-libnl-route-3-dev_3.4.0-1_armhf.deb ...
Unpacking libnl-route-3-dev:armhf (3.4.0-1) ...
Selecting previously unselected package libthai-data.
Preparing to unpack .../69-libthai-data_0.1.28-3_all.deb ...
Unpacking libthai-data (0.1.28-3) ...
Selecting previously unselected package libthai0:armhf.
Preparing to unpack .../70-libthai0_0.1.28-3_armhf.deb ...
Unpacking libthai0:armhf (0.1.28-3) ...
Selecting previously unselected package libpango-1.0-0:armhf.
Preparing to unpack .../71-libpango-1.0-0_1.46.2-3_armhf.deb ...
Unpacking libpango-1.0-0:armhf (1.46.2-3) ...
Selecting previously unselected package libpangoft2-1.0-0:armhf.
Preparing to unpack .../72-libpangoft2-1.0-0_1.46.2-3_armhf.deb ...
Unpacking libpangoft2-1.0-0:armhf (1.46.2-3) ...
Selecting previously unselected package libpangocairo-1.0-0:armhf.
Preparing to unpack .../73-libpangocairo-1.0-0_1.46.2-3_armhf.deb ...
Unpacking libpangocairo-1.0-0:armhf (1.46.2-3) ...
Selecting previously unselected package librrd8:armhf.
Preparing to unpack .../74-librrd8_1.7.2-3+b2_armhf.deb ...
Unpacking librrd8:armhf (1.7.2-3+b2) ...
Selecting previously unselected package librrd-dev:armhf.
Preparing to unpack .../75-librrd-dev_1.7.2-3+b2_armhf.deb ...
Unpacking librrd-dev:armhf (1.7.2-3+b2) ...
Selecting previously unselected package pkg-config.
Preparing to unpack .../76-pkg-config_0.29.2-1_armhf.deb ...
Unpacking pkg-config (0.29.2-1) ...
Selecting previously unselected package sbuild-build-depends-main-dummy.
Preparing to unpack .../77-sbuild-build-depends-main-dummy_0.invalid.0_armhf.deb ...
Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ...
Setting up libexpat1:armhf (2.2.10-1) ...
Setting up libpipeline1:armhf (1.5.3-1) ...
Setting up libgraphite2-3:armhf (1.3.14-1) ...
Setting up libpixman-1-0:armhf (0.36.0-1) ...
Setting up libxau6:armhf (1:1.0.8-1+b2) ...
Setting up libdbi1:armhf (0.9.0-5) ...
Setting up bsdextrautils (2.36.1-1) ...
update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode
Setting up libicu67:armhf (67.1-4) ...
Setting up libdatrie1:armhf (0.2.12-3+b5) ...
Setting up libmagic-mgc (1:5.38-5) ...
Setting up libarchive-zip-perl (1.68-1) ...
Setting up libglib2.0-0:armhf (2.66.3-1) ...
No schema files found: doing nothing.
Setting up libdebhelper-perl (13.2.1) ...
Setting up libbrotli1:armhf (1.0.9-2) ...
Setting up libmagic1:armhf (1:5.38-5) ...
Setting up gettext-base (0.19.8.1-10) ...
Setting up file (1:5.38-5) ...
Setting up autotools-dev (20180224.1) ...
Setting up libx11-data (2:1.6.12-1) ...
Setting up libncurses6:armhf (6.2+20200918-1) ...
Setting up libsigsegv2:armhf (2.12-2) ...
Setting up libfribidi0:armhf (1.0.8-2) ...
Setting up libpng16-16:armhf (1.6.37-3) ...
Setting up autopoint (0.19.8.1-10) ...
Setting up pkg-config (0.29.2-1) ...
Setting up fonts-dejavu-core (2.37-2) ...
Setting up sensible-utils (0.0.12+nmu1) ...
Setting up libuchardet0:armhf (0.0.7-1) ...
Setting up libconfuse-common (3.3-1) ...
Setting up libnl-3-200:armhf (3.4.0-1) ...
Setting up libsub-override-perl (0.09-2) ...
Setting up libthai-data (0.1.28-3) ...
Setting up libconfuse2:armhf (3.3-1) ...
Setting up libbsd0:armhf (0.10.0-1) ...
Setting up libelf1:armhf (0.182-1) ...
Setting up libxml2:armhf (2.9.10+dfsg-6.2) ...
Setting up libfile-stripnondeterminism-perl (1.9.0-1) ...
Setting up libxdmcp6:armhf (1:1.1.2-3) ...
Setting up libncurses-dev:armhf (6.2+20200918-1) ...
Setting up libxcb1:armhf (1.14-2) ...
Setting up libtool (2.4.6-14) ...
Setting up libxcb-render0:armhf (1.14-2) ...
Setting up m4 (1.4.18-4) ...
Setting up libxcb-shm0:armhf (1.14-2) ...
Setting up libnl-route-3-200:armhf (3.4.0-1) ...
Setting up libconfuse-dev:armhf (3.3-1) ...
Setting up libthai0:armhf (0.1.28-3) ...
Setting up libfreetype6:armhf (2.10.2+dfsg-4) ...
Setting up libcroco3:armhf (0.6.13-1) ...
Setting up ucf (3.0043) ...
Setting up autoconf (2.69-11.1) ...
Setting up dh-strip-nondeterminism (1.9.0-1) ...
Setting up dwz (0.13-5) ...
Setting up libnl-3-dev:armhf (3.4.0-1) ...
Setting up groff-base (1.22.4-5) ...
Setting up libncurses5-dev:armhf (6.2+20200918-1) ...
Setting up libx11-6:armhf (2:1.6.12-1) ...
Setting up libharfbuzz0b:armhf (2.6.7-1) ...
Setting up automake (1:1.16.2-4) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
Setting up gettext (0.19.8.1-10) ...
Setting up libxrender1:armhf (1:0.9.10-1) ...
Setting up fontconfig-config (2.13.1-4.2) ...
Setting up libxext6:armhf (2:1.3.3-1+b2) ...
Setting up man-db (2.9.3-2) ...
Not building database; man-db/auto-update is not 'true'.
Setting up intltool-debian (0.35.0+20060710.5) ...
Setting up libnl-route-3-dev:armhf (3.4.0-1) ...
Setting up libfontconfig1:armhf (2.13.1-4.2) ...
Setting up fontconfig (2.13.1-4.2) ...
Regenerating fonts cache... done.
Setting up po-debconf (1.0.21) ...
Setting up libpango-1.0-0:armhf (1.46.2-3) ...
Setting up libcairo2:armhf (1.16.0-4) ...
Setting up libpangoft2-1.0-0:armhf (1.46.2-3) ...
Setting up libpangocairo-1.0-0:armhf (1.46.2-3) ...
Setting up librrd8:armhf (1.7.2-3+b2) ...
Setting up librrd-dev:armhf (1.7.2-3+b2) ...
Setting up dh-autoreconf (19) ...
Setting up debhelper (13.2.1) ...
Setting up sbuild-build-depends-main-dummy (0.invalid.0) ...
Processing triggers for libc-bin (2.31-4+rpi1) ...
+------------------------------------------------------------------------------+
| Check architectures |
+------------------------------------------------------------------------------+
Arch check ok (armhf included in any)
+------------------------------------------------------------------------------+
| Build environment |
+------------------------------------------------------------------------------+
Kernel: Linux 4.19.20-v7+ #1 SMP Mon Mar 18 11:37:02 GMT 2019 armhf (armv7l)
Toolchain package versions: binutils_2.35.1-2+rpi1 dpkg-dev_1.20.5+rpi1 g++-10_10.2.0-16+rpi1 gcc-10_10.2.0-16+rpi1 libc6-dev_2.31-4+rpi1 libstdc++-10-dev_10.2.0-16+rpi1 libstdc++6_10.2.0-16+rpi1 linux-libc-dev_5.7.10-1+rpi1
Package versions: adduser_3.118 apt_2.1.11 autoconf_2.69-11.1 automake_1:1.16.2-4 autopoint_0.19.8.1-10 autotools-dev_20180224.1 base-files_11+rpi1 base-passwd_3.5.48 bash_5.1~rc2-1 binutils_2.35.1-2+rpi1 binutils-arm-linux-gnueabihf_2.35.1-2+rpi1 binutils-common_2.35.1-2+rpi1 bsdextrautils_2.36.1-1 bsdutils_1:2.36-3 build-essential_12.8 bzip2_1.0.8-4 coreutils_8.32-4 cpp_4:10.2.0-1+rpi1 cpp-10_10.2.0-16+rpi1 dash_0.5.11+git20200708+dd9ef66-2 debconf_1.5.74 debhelper_13.2.1 debianutils_4.11.2 dh-autoreconf_19 dh-strip-nondeterminism_1.9.0-1 diffutils_1:3.7-3 dirmngr_2.2.20-1 dpkg_1.20.5+rpi1 dpkg-dev_1.20.5+rpi1 dwz_0.13-5 e2fsprogs_1.45.6-1 fakeroot_1.25.3-1 file_1:5.38-5 findutils_4.7.0+git20201010-2 fontconfig_2.13.1-4.2 fontconfig-config_2.13.1-4.2 fonts-dejavu-core_2.37-2 g++_4:10.2.0-1+rpi1 g++-10_10.2.0-16+rpi1 gcc_4:10.2.0-1+rpi1 gcc-10_10.2.0-16+rpi1 gcc-10-base_10.2.0-16+rpi1 gcc-7-base_7.5.0-6+rpi1+b1 gcc-8-base_8.4.0-4+rpi1+b1 gcc-9-base_9.3.0-18+rpi1 gettext_0.19.8.1-10 gettext-base_0.19.8.1-10 gnupg_2.2.20-1 gnupg-l10n_2.2.20-1 gnupg-utils_2.2.20-1 gpg_2.2.20-1 gpg-agent_2.2.20-1 gpg-wks-client_2.2.20-1 gpg-wks-server_2.2.20-1 gpgconf_2.2.20-1 gpgsm_2.2.20-1 gpgv_2.2.20-1 grep_3.6-1 groff-base_1.22.4-5 gzip_1.10-2 hostname_3.23 init-system-helpers_1.58 intltool-debian_0.35.0+20060710.5 libacl1_2.2.53-8 libapt-pkg6.0_2.1.11 libarchive-zip-perl_1.68-1 libasan6_10.2.0-16+rpi1 libassuan0_2.5.3-7.1 libatomic1_10.2.0-16+rpi1 libattr1_1:2.4.48-5 libaudit-common_1:2.8.5-3.1 libaudit1_1:2.8.5-3.1 libbinutils_2.35.1-2+rpi1 libblkid1_2.36-3 libbrotli1_1.0.9-2 libbsd0_0.10.0-1 libbz2-1.0_1.0.8-4 libc-bin_2.31-4+rpi1 libc-dev-bin_2.31-4+rpi1 libc6_2.31-4+rpi1 libc6-dev_2.31-4+rpi1 libcairo2_1.16.0-4 libcap-ng0_0.7.9-2.2 libcc1-0_10.2.0-16+rpi1 libcom-err2_1.45.6-1 libconfuse-common_3.3-1 libconfuse-dev_3.3-1 libconfuse2_3.3-1 libcroco3_0.6.13-1 libcrypt-dev_1:4.4.17-1 libcrypt1_1:4.4.17-1 libctf-nobfd0_2.35.1-2+rpi1 libctf0_2.35.1-2+rpi1 libdatrie1_0.2.12-3+b5 libdb5.3_5.3.28+dfsg1-0.6 libdbi1_0.9.0-5 libdebconfclient0_0.255 libdebhelper-perl_13.2.1 libdpkg-perl_1.20.5+rpi1 libelf1_0.182-1 libexpat1_2.2.10-1 libext2fs2_1.45.6-1 libfakeroot_1.25.3-1 libffi7_3.3-5 libfile-stripnondeterminism-perl_1.9.0-1 libfontconfig1_2.13.1-4.2 libfreetype6_2.10.2+dfsg-4 libfribidi0_1.0.8-2 libgcc-10-dev_10.2.0-16+rpi1 libgcc-s1_10.2.0-16+rpi1 libgcrypt20_1.8.7-2 libgdbm-compat4_1.18.1-5.1 libgdbm6_1.18.1-5.1 libglib2.0-0_2.66.3-1 libgmp10_2:6.2.0+dfsg-6 libgnutls30_3.6.15-4 libgomp1_10.2.0-16+rpi1 libgpg-error0_1.38-2 libgraphite2-3_1.3.14-1 libgssapi-krb5-2_1.17-10+b3 libharfbuzz0b_2.6.7-1 libhogweed6_3.6-2 libicu67_67.1-4 libidn2-0_2.3.0-3 libisl22_0.22.1-1 libk5crypto3_1.17-10+b3 libkeyutils1_1.6.1-2 libkrb5-3_1.17-10+b3 libkrb5support0_1.17-10+b3 libksba8_1.4.0-2 libldap-2.4-2_2.4.56+dfsg-1+rpi1+b1 liblocale-gettext-perl_1.07-4+b1 liblz4-1_1.9.2-2 liblzma5_5.2.4-1 libmagic-mgc_1:5.38-5 libmagic1_1:5.38-5 libmount1_2.36-3 libmpc3_1.2.0-1 libmpfr6_4.1.0-3 libncurses-dev_6.2+20200918-1 libncurses5-dev_6.2+20200918-1 libncurses6_6.2+20200918-1 libncursesw6_6.2+20200918-1 libnettle8_3.6-2 libnl-3-200_3.4.0-1 libnl-3-dev_3.4.0-1 libnl-route-3-200_3.4.0-1 libnl-route-3-dev_3.4.0-1 libnpth0_1.6-3 libnsl-dev_1.3.0-2 libnsl2_1.3.0-2 libnss-nis_3.1-4 libnss-nisplus_1.3-4 libp11-kit0_0.23.21-2 libpam-modules_1.3.1-5 libpam-modules-bin_1.3.1-5 libpam-runtime_1.3.1-5 libpam0g_1.3.1-5 libpango-1.0-0_1.46.2-3 libpangocairo-1.0-0_1.46.2-3 libpangoft2-1.0-0_1.46.2-3 libpcre2-8-0_10.34-7 libpcre3_2:8.39-13 libperl5.32_5.32.0-5 libpipeline1_1.5.3-1 libpixman-1-0_0.36.0-1 libpng16-16_1.6.37-3 libreadline8_8.1~rc2-2 librrd-dev_1.7.2-3+b2 librrd8_1.7.2-3+b2 libsasl2-2_2.1.27+dfsg-2 libsasl2-modules-db_2.1.27+dfsg-2 libseccomp2_2.5.0-3+rpi1 libselinux1_3.1-2 libsemanage-common_3.1-1 libsemanage1_3.1-1 libsepol1_3.1-1 libsigsegv2_2.12-2 libsmartcols1_2.36-3 libsqlite3-0_3.33.0-1 libss2_1.45.6-1 libssl1.1_1.1.1h-1 libstdc++-10-dev_10.2.0-16+rpi1 libstdc++6_10.2.0-16+rpi1 libsub-override-perl_0.09-2 libsystemd0_246.6-2+rpi1 libtasn1-6_4.16.0-2 libtext-iconv-perl_1.7-7+b1 libthai-data_0.1.28-3 libthai0_0.1.28-3 libtinfo6_6.2+20200918-1 libtirpc-common_1.2.6-3 libtirpc-dev_1.2.6-3 libtirpc3_1.2.6-3 libtool_2.4.6-14 libubsan1_10.2.0-16+rpi1 libuchardet0_0.0.7-1 libudev1_246.6-2+rpi1 libunistring2_0.9.10-4 libuuid1_2.36-3 libx11-6_2:1.6.12-1 libx11-data_2:1.6.12-1 libxau6_1:1.0.8-1+b2 libxcb-render0_1.14-2 libxcb-shm0_1.14-2 libxcb1_1.14-2 libxdmcp6_1:1.1.2-3 libxext6_2:1.3.3-1+b2 libxml2_2.9.10+dfsg-6.2 libxrender1_1:0.9.10-1 libzstd1_1.4.5+dfsg-4+rpi1 linux-libc-dev_5.7.10-1+rpi1 login_1:4.8.1-1 logsave_1.45.6-1 lsb-base_11.1.0+rpi1 m4_1.4.18-4 make_4.3-4 man-db_2.9.3-2 mawk_1.3.4.20200120-2 mount_2.36-3 ncurses-base_6.2+20200918-1 ncurses-bin_6.2+20200918-1 passwd_1:4.8.1-1 patch_2.7.6-6 perl_5.32.0-5 perl-base_5.32.0-5 perl-modules-5.32_5.32.0-5 pinentry-curses_1.1.0-4 pkg-config_0.29.2-1 po-debconf_1.0.21 raspbian-archive-keyring_20120528.2 readline-common_8.1~rc2-2 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.7-1 sensible-utils_0.0.12+nmu1 sysvinit-utils_2.96-5 tar_1.30+dfsg-7 tzdata_2020d-1 ucf_3.0043 util-linux_2.36-3 xz-utils_5.2.4-1 zlib1g_1:1.2.11.dfsg-2
+------------------------------------------------------------------------------+
| Build |
+------------------------------------------------------------------------------+
Unpack source
-------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Format: 3.0 (quilt)
Source: bmon
Binary: bmon
Architecture: any
Version: 1:4.0-7
Maintainer: Patrick Matthäi <pmatthaei@debian.org>
Homepage: http://www.infradead.org/~tgr/bmon/
Standards-Version: 4.5.1
Build-Depends: debhelper-compat (= 13), libconfuse-dev, libnl-3-dev [linux-any], libnl-route-3-dev [linux-any], libncurses5-dev, librrd-dev [linux-any kfreebsd-any], pkg-config
Package-List:
bmon deb net optional arch=any
Checksums-Sha1:
4dfe30bcc2c85ee2f43d1f863d7580e301e81473 51856 bmon_4.0.orig.tar.xz
45bc95fdb2a38973b945bf973b1bb8e837682984 4456 bmon_4.0-7.debian.tar.xz
Checksums-Sha256:
2775524050091409d3805394786b0e5b8a41e71276a123b27186409b99bad957 51856 bmon_4.0.orig.tar.xz
dcd1014048d59d470cbbbd6b42616f332d7ded98f6d2ffd552435540ca6b4f19 4456 bmon_4.0-7.debian.tar.xz
Files:
676d9845adc29599a9123e060221f1f0 51856 bmon_4.0.orig.tar.xz
9de6b72ab69bb3e3dbc4e60e6c8a7515 4456 bmon_4.0-7.debian.tar.xz
-----BEGIN PGP SIGNATURE-----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=tH8G
-----END PGP SIGNATURE-----
gpgv: unknown type of key resource 'trustedkeys.kbx'
gpgv: keyblock resource '/tmp/dpkg-verify-sig.2qpmCVao/trustedkeys.kbx': General error
gpgv: Signature made Thu Nov 19 14:02:38 2020 UTC
gpgv: using RSA key 58A03DC582425A4DC8B90E1312D9B04A90CBD8E4
gpgv: Can't check signature: No public key
dpkg-source: warning: failed to verify signature on ./bmon_4.0-7.dsc
dpkg-source: info: extracting bmon in /<<PKGBUILDDIR>>
dpkg-source: info: unpacking bmon_4.0.orig.tar.xz
dpkg-source: info: unpacking bmon_4.0-7.debian.tar.xz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: applying 01-bsd-ftbfs.diff
dpkg-source: info: applying 02-cross-build.diff
Check disk space
----------------
Sufficient free space for build
User Environment
----------------
APT_CONFIG=/var/lib/sbuild/apt.conf
DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/112/bus
DEB_BUILD_OPTIONS=parallel=4
HOME=/sbuild-nonexistent
INVOCATION_ID=1ec3ff19654148fab3a02153247d5928
JOURNAL_STREAM=8:145870
LANG=en_GB.UTF-8
LC_ALL=C.UTF-8
LOGNAME=buildd
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
PWD=/
SCHROOT_ALIAS_NAME=bullseye-staging-armhf-sbuild
SCHROOT_CHROOT_NAME=bullseye-staging-armhf-sbuild
SCHROOT_COMMAND=env
SCHROOT_GID=117
SCHROOT_GROUP=buildd
SCHROOT_SESSION_ID=bullseye-staging-armhf-sbuild-bfd4ebc2-8b00-4525-9c5a-6cc50f8ccd39
SCHROOT_UID=112
SCHROOT_USER=buildd
SHELL=/bin/sh
USER=buildd
XDG_RUNTIME_DIR=/run/user/112
XDG_SESSION_CLASS=background
XDG_SESSION_ID=c20028
XDG_SESSION_TYPE=unspecified
dpkg-buildpackage
-----------------
Command: dpkg-buildpackage -us -uc -mRaspbian pi4 based autobuilder <root@raspbian.org> -B -rfakeroot
dpkg-buildpackage: info: source package bmon
dpkg-buildpackage: info: source version 1:4.0-7
dpkg-buildpackage: info: source distribution unstable
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture armhf
debian/rules clean
dh clean
dh_clean
debian/rules binary-arch
dh binary-arch
dh_update_autotools_config -a
dh_autoreconf -a
configure.ac:35: installing 'build-aux/compile'
configure.ac:29: installing 'build-aux/config.guess'
configure.ac:29: installing 'build-aux/config.sub'
configure.ac:32: installing 'build-aux/install-sh'
configure.ac:32: installing 'build-aux/missing'
src/Makefile.am: installing 'build-aux/depcomp'
debian/rules override_dh_auto_configure
make[1]: Entering directory '/<<PKGBUILDDIR>>'
dh_auto_configure -- --disable-silent-rules
./configure --build=arm-linux-gnueabihf --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --disable-silent-rules
checking build system type... arm-unknown-linux-gnueabihf
checking host system type... arm-unknown-linux-gnueabihf
checking target system type... arm-unknown-linux-gnueabihf
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make supports the include directive... yes (GNU style)
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... none
checking for library containing strerror... none required
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ISO C89... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking dependency style of gcc... (cached) none
checking for gcc option to accept ISO C99... none needed
checking for gcc option to accept ISO Standard C... (cached) none needed
checking how to run the C preprocessor... gcc -E
checking whether make sets $(MAKE)... (cached) yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking whether time.h and sys/time.h may both be included... yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for size_t... yes
checking return type of signal handlers... void
checking for pid_t... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking getopt.h usability... yes
checking getopt.h presence... yes
checking for getopt.h... yes
checking ncurses/ncurses.h usability... no
checking ncurses/ncurses.h presence... no
checking for ncurses/ncurses.h... no
checking ncurses.h usability... yes
checking ncurses.h presence... yes
checking for ncurses.h... yes
checking curses.h usability... yes
checking curses.h presence... yes
checking for curses.h... yes
checking dirent.h usability... yes
checking dirent.h presence... yes
checking for dirent.h... yes
checking sys/utsname.h usability... yes
checking sys/utsname.h presence... yes
checking for sys/utsname.h... yes
checking sys/sockio.h usability... no
checking sys/sockio.h presence... no
checking for sys/sockio.h... no
checking netinet6/in6.h usability... no
checking netinet6/in6.h presence... no
checking for netinet6/in6.h... no
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking sysctl/ioctl.h usability... no
checking sysctl/ioctl.h presence... no
checking for sysctl/ioctl.h... no
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking for suseconds_t... yes
checking for atexit... yes
checking for clock_gettime... yes
checking for memset... yes
checking for pow... no
checking for socket... yes
checking for strcasecmp... yes
checking for strchr... yes
checking for strdup... yes
checking for strerror... yes
checking for strncasecmp... yes
checking for strstr... yes
checking for strtol... yes
checking for uname... yes
checking for getdate... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for NcursesW wide-character library... yes
checking for working ncursesw/curses.h... yes
checking for working ncursesw.h... no
checking for working ncurses.h... yes
checking for libconfuse... yes
checking for libnl-3.0... yes
checking for libnl-route-3.0... yes
checking for pow in -lm... yes
checking for clock_gettime in -lrt... yes
checking for initscr in -lncurses... yes
checking for redrawwin in -lncurses... yes
checking for use_default_colors in -lncurses... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating include/Makefile
config.status: creating src/Makefile
config.status: creating man/Makefile
config.status: creating examples/Makefile
config.status: creating include/bmon/defs.h
config.status: executing depfiles commands
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_auto_build -a
make -j4
make[1]: Entering directory '/<<PKGBUILDDIR>>'
Making all in src
make[2]: Entering directory '/<<PKGBUILDDIR>>/src'
gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-utils.o `test -f 'utils.c' || echo './'`utils.c
gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-unit.o `test -f 'unit.c' || echo './'`unit.c
gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-conf.o `test -f 'conf.c' || echo './'`conf.c
gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-input.o `test -f 'input.c' || echo './'`input.c
gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-output.o `test -f 'output.c' || echo './'`output.c
gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-group.o `test -f 'group.c' || echo './'`group.c
gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-element.o `test -f 'element.c' || echo './'`element.c
gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-attr.o `test -f 'attr.c' || echo './'`attr.c
gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-element_cfg.o `test -f 'element_cfg.c' || echo './'`element_cfg.c
gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-history.o `test -f 'history.c' || echo './'`history.c
gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-graph.o `test -f 'graph.c' || echo './'`graph.c
gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-bmon.o `test -f 'bmon.c' || echo './'`bmon.c
gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-module.o `test -f 'module.c' || echo './'`module.c
gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-in_netlink.o `test -f 'in_netlink.c' || echo './'`in_netlink.c
gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-in_null.o `test -f 'in_null.c' || echo './'`in_null.c
gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-in_dummy.o `test -f 'in_dummy.c' || echo './'`in_dummy.c
gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-in_proc.o `test -f 'in_proc.c' || echo './'`in_proc.c
gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-in_sysctl.o `test -f 'in_sysctl.c' || echo './'`in_sysctl.c
in_netlink.c: In function ‘handle_tc_obj’:
in_netlink.c:558:37: warning: ‘ (’ directive output may be truncated writing 2 bytes into a region of size between 0 and 31 [-Wformat-truncation=]
558 | snprintf(name, sizeof(name), "%s %s (%s)",
| ^~
In file included from /usr/include/stdio.h:867,
from ../include/bmon/config.h:36,
from ../include/bmon/bmon.h:29,
from in_netlink.c:26:
/usr/include/arm-linux-gnueabihf/bits/stdio2.h:67:10: note: ‘__builtin___snprintf_chk’ output 5 or more bytes (assuming 36) into a destination of size 32
67 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
68 | __bos (__s), __fmt, __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-out_null.o `test -f 'out_null.c' || echo './'`out_null.c
gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-out_format.o `test -f 'out_format.c' || echo './'`out_format.c
gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-out_ascii.o `test -f 'out_ascii.c' || echo './'`out_ascii.c
gcc -DHAVE_CONFIG_H -I. -I../include/bmon -Wdate-time -D_FORTIFY_SOURCE=2 -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bmon-out_curses.o `test -f 'out_curses.c' || echo './'`out_curses.c
gcc -I../include -I../include -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -Wall -I/usr/include/libnl3 -I/usr/include/libnl3 -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -o bmon bmon-utils.o bmon-unit.o bmon-conf.o bmon-input.o bmon-output.o bmon-group.o bmon-element.o bmon-attr.o bmon-element_cfg.o bmon-history.o bmon-graph.o bmon-bmon.o bmon-module.o bmon-in_netlink.o bmon-in_null.o bmon-in_dummy.o bmon-in_proc.o bmon-in_sysctl.o bmon-out_null.o bmon-out_format.o bmon-out_ascii.o bmon-out_curses.o -lncursesw -lconfuse -lnl-3 -lnl-route-3 -lnl-3 -lrt -lm
make[2]: Leaving directory '/<<PKGBUILDDIR>>/src'
Making all in man
make[2]: Entering directory '/<<PKGBUILDDIR>>/man'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/<<PKGBUILDDIR>>/man'
Making all in include
make[2]: Entering directory '/<<PKGBUILDDIR>>/include'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/<<PKGBUILDDIR>>/include'
Making all in examples
make[2]: Entering directory '/<<PKGBUILDDIR>>/examples'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/<<PKGBUILDDIR>>/examples'
make[2]: Entering directory '/<<PKGBUILDDIR>>'
make[2]: Nothing to be done for 'all-am'.
make[2]: Leaving directory '/<<PKGBUILDDIR>>'
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_auto_test -a
make -j4 check VERBOSE=1
make[1]: Entering directory '/<<PKGBUILDDIR>>'
Making check in src
make[2]: Entering directory '/<<PKGBUILDDIR>>/src'
make[2]: Nothing to be done for 'check'.
make[2]: Leaving directory '/<<PKGBUILDDIR>>/src'
Making check in man
make[2]: Entering directory '/<<PKGBUILDDIR>>/man'
make[2]: Nothing to be done for 'check'.
make[2]: Leaving directory '/<<PKGBUILDDIR>>/man'
Making check in include
make[2]: Entering directory '/<<PKGBUILDDIR>>/include'
make[2]: Nothing to be done for 'check'.
make[2]: Leaving directory '/<<PKGBUILDDIR>>/include'
Making check in examples
make[2]: Entering directory '/<<PKGBUILDDIR>>/examples'
make[2]: Nothing to be done for 'check'.
make[2]: Leaving directory '/<<PKGBUILDDIR>>/examples'
make[2]: Entering directory '/<<PKGBUILDDIR>>'
make[2]: Nothing to be done for 'check-am'.
make[2]: Leaving directory '/<<PKGBUILDDIR>>'
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
create-stamp debian/debhelper-build-stamp
dh_testroot -a
dh_prep -a
dh_auto_install -a
make -j4 install DESTDIR=/<<PKGBUILDDIR>>/debian/bmon AM_UPDATE_INFO_DIR=no
make[1]: Entering directory '/<<PKGBUILDDIR>>'
Making install in src
make[2]: Entering directory '/<<PKGBUILDDIR>>/src'
make[3]: Entering directory '/<<PKGBUILDDIR>>/src'
make[3]: Nothing to be done for 'install-data-am'.
/bin/mkdir -p '/<<PKGBUILDDIR>>/debian/bmon/usr/bin'
/usr/bin/install -c bmon '/<<PKGBUILDDIR>>/debian/bmon/usr/bin'
make[3]: Leaving directory '/<<PKGBUILDDIR>>/src'
make[2]: Leaving directory '/<<PKGBUILDDIR>>/src'
Making install in man
make[2]: Entering directory '/<<PKGBUILDDIR>>/man'
make[3]: Entering directory '/<<PKGBUILDDIR>>/man'
make[3]: Nothing to be done for 'install-exec-am'.
/bin/mkdir -p '/<<PKGBUILDDIR>>/debian/bmon/usr/share/man/man8'
/usr/bin/install -c -m 644 bmon.8 '/<<PKGBUILDDIR>>/debian/bmon/usr/share/man/man8'
make[3]: Leaving directory '/<<PKGBUILDDIR>>/man'
make[2]: Leaving directory '/<<PKGBUILDDIR>>/man'
Making install in include
make[2]: Entering directory '/<<PKGBUILDDIR>>/include'
make[3]: Entering directory '/<<PKGBUILDDIR>>/include'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/<<PKGBUILDDIR>>/include'
make[2]: Leaving directory '/<<PKGBUILDDIR>>/include'
Making install in examples
make[2]: Entering directory '/<<PKGBUILDDIR>>/examples'
make[3]: Entering directory '/<<PKGBUILDDIR>>/examples'
make[3]: Nothing to be done for 'install-exec-am'.
/bin/mkdir -p '/<<PKGBUILDDIR>>/debian/bmon/usr/share/doc/bmon/examples'
/usr/bin/install -c -m 644 bmon.conf '/<<PKGBUILDDIR>>/debian/bmon/usr/share/doc/bmon/examples'
make[3]: Leaving directory '/<<PKGBUILDDIR>>/examples'
make[2]: Leaving directory '/<<PKGBUILDDIR>>/examples'
make[2]: Entering directory '/<<PKGBUILDDIR>>'
make[3]: Entering directory '/<<PKGBUILDDIR>>'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/<<PKGBUILDDIR>>'
make[2]: Leaving directory '/<<PKGBUILDDIR>>'
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_install -a
dh_installdocs -a
debian/rules override_dh_installchangelogs
make[1]: Entering directory '/<<PKGBUILDDIR>>'
dh_installchangelogs NEWS
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_installman -a
dh_perl -a
dh_link -a
dh_strip_nondeterminism -a
dh_compress -a
dh_fixperms -a
dh_missing -a
dh_dwz -a -a
dh_strip -a -a
dh_makeshlibs -a -a
dh_shlibdeps -a -a
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/bmon/usr/bin/bmon was not linked against ld-linux-armhf.so.3 (it uses none of the library's symbols)
dh_installdeb -a
dh_gencontrol -a
dh_md5sums -a
dh_builddeb -a
dpkg-deb: building package 'bmon-dbgsym' in '../bmon-dbgsym_4.0-7_armhf.deb'.
dpkg-deb: building package 'bmon' in '../bmon_4.0-7_armhf.deb'.
dpkg-genbuildinfo --build=any
dpkg-genchanges --build=any -mRaspbian pi4 based autobuilder <root@raspbian.org> >../bmon_4.0-7_armhf.changes
dpkg-genchanges: info: binary-only arch-specific upload (source code and arch-indep packages not included)
dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)
--------------------------------------------------------------------------------
Build finished at 2020-11-25T05:59:59Z
Finished
--------
I: Built successfully
+------------------------------------------------------------------------------+
| Changes |
+------------------------------------------------------------------------------+
bmon_4.0-7_armhf.changes:
-------------------------
Format: 1.8
Date: Thu, 19 Nov 2020 14:56:32 +0100
Source: bmon
Binary: bmon bmon-dbgsym
Architecture: armhf
Version: 1:4.0-7
Distribution: bullseye-staging
Urgency: medium
Maintainer: Raspbian pi4 based autobuilder <root@raspbian.org>
Changed-By: Patrick Matthäi <pmatthaei@debian.org>
Description:
bmon - portable bandwidth monitor and rate estimator
Changes:
bmon (1:4.0-7) unstable; urgency=medium
.
* Adjust lintian overrides.
* Bump Standards-Version to 4.5.1.
* Bump debhelper-compat to level 13.
* Update debian/watch file standard to version 4.
Checksums-Sha1:
738155b7ced303b5e9b2823c4cd6233d5f2e68e8 114232 bmon-dbgsym_4.0-7_armhf.deb
8eff65527f935ec8a198d2578c761d8ef49f7975 6205 bmon_4.0-7_armhf.buildinfo
c3cc8e9761d32d1fe137890f1ebaebb8caa701db 39412 bmon_4.0-7_armhf.deb
Checksums-Sha256:
554732f861467e95a28001031f8da55efd2002619744418d2818109bd5c08478 114232 bmon-dbgsym_4.0-7_armhf.deb
afd994e4fdde62b394f931ab2b3b09dbdcc824c5577ac7b83e37340e7700bc08 6205 bmon_4.0-7_armhf.buildinfo
207d86799d401508042025976b1ee9f55c408fbf299b8bebda29b91473381c10 39412 bmon_4.0-7_armhf.deb
Files:
960227b4a4cbeb5af72b357c91fe6f5c 114232 debug optional bmon-dbgsym_4.0-7_armhf.deb
5a0e792fffe382bcee417ca8876eabec 6205 net optional bmon_4.0-7_armhf.buildinfo
49ac11f492770967f74f3c9656e84d36 39412 net optional bmon_4.0-7_armhf.deb
+------------------------------------------------------------------------------+
| Buildinfo |
+------------------------------------------------------------------------------+
Format: 1.0
Source: bmon
Binary: bmon bmon-dbgsym
Architecture: armhf
Version: 1:4.0-7
Checksums-Md5:
960227b4a4cbeb5af72b357c91fe6f5c 114232 bmon-dbgsym_4.0-7_armhf.deb
49ac11f492770967f74f3c9656e84d36 39412 bmon_4.0-7_armhf.deb
Checksums-Sha1:
738155b7ced303b5e9b2823c4cd6233d5f2e68e8 114232 bmon-dbgsym_4.0-7_armhf.deb
c3cc8e9761d32d1fe137890f1ebaebb8caa701db 39412 bmon_4.0-7_armhf.deb
Checksums-Sha256:
554732f861467e95a28001031f8da55efd2002619744418d2818109bd5c08478 114232 bmon-dbgsym_4.0-7_armhf.deb
207d86799d401508042025976b1ee9f55c408fbf299b8bebda29b91473381c10 39412 bmon_4.0-7_armhf.deb
Build-Origin: Raspbian
Build-Architecture: armhf
Build-Date: Wed, 25 Nov 2020 05:59:58 +0000
Build-Path: /<<PKGBUILDDIR>>
Installed-Build-Depends:
autoconf (= 2.69-11.1),
automake (= 1:1.16.2-4),
autopoint (= 0.19.8.1-10),
autotools-dev (= 20180224.1),
base-files (= 11+rpi1),
base-passwd (= 3.5.48),
bash (= 5.1~rc2-1),
binutils (= 2.35.1-2+rpi1),
binutils-arm-linux-gnueabihf (= 2.35.1-2+rpi1),
binutils-common (= 2.35.1-2+rpi1),
bsdextrautils (= 2.36.1-1),
bsdutils (= 1:2.36-3),
build-essential (= 12.8),
bzip2 (= 1.0.8-4),
coreutils (= 8.32-4),
cpp (= 4:10.2.0-1+rpi1),
cpp-10 (= 10.2.0-16+rpi1),
dash (= 0.5.11+git20200708+dd9ef66-2),
debconf (= 1.5.74),
debhelper (= 13.2.1),
debianutils (= 4.11.2),
dh-autoreconf (= 19),
dh-strip-nondeterminism (= 1.9.0-1),
diffutils (= 1:3.7-3),
dpkg (= 1.20.5+rpi1),
dpkg-dev (= 1.20.5+rpi1),
dwz (= 0.13-5),
file (= 1:5.38-5),
findutils (= 4.7.0+git20201010-2),
fontconfig (= 2.13.1-4.2),
fontconfig-config (= 2.13.1-4.2),
fonts-dejavu-core (= 2.37-2),
g++ (= 4:10.2.0-1+rpi1),
g++-10 (= 10.2.0-16+rpi1),
gcc (= 4:10.2.0-1+rpi1),
gcc-10 (= 10.2.0-16+rpi1),
gcc-10-base (= 10.2.0-16+rpi1),
gettext (= 0.19.8.1-10),
gettext-base (= 0.19.8.1-10),
grep (= 3.6-1),
groff-base (= 1.22.4-5),
gzip (= 1.10-2),
hostname (= 3.23),
init-system-helpers (= 1.58),
intltool-debian (= 0.35.0+20060710.5),
libacl1 (= 2.2.53-8),
libarchive-zip-perl (= 1.68-1),
libasan6 (= 10.2.0-16+rpi1),
libatomic1 (= 10.2.0-16+rpi1),
libattr1 (= 1:2.4.48-5),
libaudit-common (= 1:2.8.5-3.1),
libaudit1 (= 1:2.8.5-3.1),
libbinutils (= 2.35.1-2+rpi1),
libblkid1 (= 2.36-3),
libbrotli1 (= 1.0.9-2),
libbsd0 (= 0.10.0-1),
libbz2-1.0 (= 1.0.8-4),
libc-bin (= 2.31-4+rpi1),
libc-dev-bin (= 2.31-4+rpi1),
libc6 (= 2.31-4+rpi1),
libc6-dev (= 2.31-4+rpi1),
libcairo2 (= 1.16.0-4),
libcap-ng0 (= 0.7.9-2.2),
libcc1-0 (= 10.2.0-16+rpi1),
libcom-err2 (= 1.45.6-1),
libconfuse-common (= 3.3-1),
libconfuse-dev (= 3.3-1),
libconfuse2 (= 3.3-1),
libcroco3 (= 0.6.13-1),
libcrypt-dev (= 1:4.4.17-1),
libcrypt1 (= 1:4.4.17-1),
libctf-nobfd0 (= 2.35.1-2+rpi1),
libctf0 (= 2.35.1-2+rpi1),
libdatrie1 (= 0.2.12-3+b5),
libdb5.3 (= 5.3.28+dfsg1-0.6),
libdbi1 (= 0.9.0-5),
libdebconfclient0 (= 0.255),
libdebhelper-perl (= 13.2.1),
libdpkg-perl (= 1.20.5+rpi1),
libelf1 (= 0.182-1),
libexpat1 (= 2.2.10-1),
libffi7 (= 3.3-5),
libfile-stripnondeterminism-perl (= 1.9.0-1),
libfontconfig1 (= 2.13.1-4.2),
libfreetype6 (= 2.10.2+dfsg-4),
libfribidi0 (= 1.0.8-2),
libgcc-10-dev (= 10.2.0-16+rpi1),
libgcc-s1 (= 10.2.0-16+rpi1),
libgcrypt20 (= 1.8.7-2),
libgdbm-compat4 (= 1.18.1-5.1),
libgdbm6 (= 1.18.1-5.1),
libglib2.0-0 (= 2.66.3-1),
libgmp10 (= 2:6.2.0+dfsg-6),
libgomp1 (= 10.2.0-16+rpi1),
libgpg-error0 (= 1.38-2),
libgraphite2-3 (= 1.3.14-1),
libgssapi-krb5-2 (= 1.17-10+b3),
libharfbuzz0b (= 2.6.7-1),
libicu67 (= 67.1-4),
libisl22 (= 0.22.1-1),
libk5crypto3 (= 1.17-10+b3),
libkeyutils1 (= 1.6.1-2),
libkrb5-3 (= 1.17-10+b3),
libkrb5support0 (= 1.17-10+b3),
liblz4-1 (= 1.9.2-2),
liblzma5 (= 5.2.4-1),
libmagic-mgc (= 1:5.38-5),
libmagic1 (= 1:5.38-5),
libmount1 (= 2.36-3),
libmpc3 (= 1.2.0-1),
libmpfr6 (= 4.1.0-3),
libncurses-dev (= 6.2+20200918-1),
libncurses5-dev (= 6.2+20200918-1),
libncurses6 (= 6.2+20200918-1),
libncursesw6 (= 6.2+20200918-1),
libnl-3-200 (= 3.4.0-1),
libnl-3-dev (= 3.4.0-1),
libnl-route-3-200 (= 3.4.0-1),
libnl-route-3-dev (= 3.4.0-1),
libnsl-dev (= 1.3.0-2),
libnsl2 (= 1.3.0-2),
libnss-nis (= 3.1-4),
libnss-nisplus (= 1.3-4),
libpam-modules (= 1.3.1-5),
libpam-modules-bin (= 1.3.1-5),
libpam-runtime (= 1.3.1-5),
libpam0g (= 1.3.1-5),
libpango-1.0-0 (= 1.46.2-3),
libpangocairo-1.0-0 (= 1.46.2-3),
libpangoft2-1.0-0 (= 1.46.2-3),
libpcre2-8-0 (= 10.34-7),
libpcre3 (= 2:8.39-13),
libperl5.32 (= 5.32.0-5),
libpipeline1 (= 1.5.3-1),
libpixman-1-0 (= 0.36.0-1),
libpng16-16 (= 1.6.37-3),
librrd-dev (= 1.7.2-3+b2),
librrd8 (= 1.7.2-3+b2),
libseccomp2 (= 2.5.0-3+rpi1),
libselinux1 (= 3.1-2),
libsigsegv2 (= 2.12-2),
libsmartcols1 (= 2.36-3),
libssl1.1 (= 1.1.1h-1),
libstdc++-10-dev (= 10.2.0-16+rpi1),
libstdc++6 (= 10.2.0-16+rpi1),
libsub-override-perl (= 0.09-2),
libsystemd0 (= 246.6-2+rpi1),
libthai-data (= 0.1.28-3),
libthai0 (= 0.1.28-3),
libtinfo6 (= 6.2+20200918-1),
libtirpc-common (= 1.2.6-3),
libtirpc-dev (= 1.2.6-3),
libtirpc3 (= 1.2.6-3),
libtool (= 2.4.6-14),
libubsan1 (= 10.2.0-16+rpi1),
libuchardet0 (= 0.0.7-1),
libudev1 (= 246.6-2+rpi1),
libunistring2 (= 0.9.10-4),
libuuid1 (= 2.36-3),
libx11-6 (= 2:1.6.12-1),
libx11-data (= 2:1.6.12-1),
libxau6 (= 1:1.0.8-1+b2),
libxcb-render0 (= 1.14-2),
libxcb-shm0 (= 1.14-2),
libxcb1 (= 1.14-2),
libxdmcp6 (= 1:1.1.2-3),
libxext6 (= 2:1.3.3-1+b2),
libxml2 (= 2.9.10+dfsg-6.2),
libxrender1 (= 1:0.9.10-1),
libzstd1 (= 1.4.5+dfsg-4+rpi1),
linux-libc-dev (= 5.7.10-1+rpi1),
login (= 1:4.8.1-1),
lsb-base (= 11.1.0+rpi1),
m4 (= 1.4.18-4),
make (= 4.3-4),
man-db (= 2.9.3-2),
mawk (= 1.3.4.20200120-2),
ncurses-base (= 6.2+20200918-1),
ncurses-bin (= 6.2+20200918-1),
patch (= 2.7.6-6),
perl (= 5.32.0-5),
perl-base (= 5.32.0-5),
perl-modules-5.32 (= 5.32.0-5),
pkg-config (= 0.29.2-1),
po-debconf (= 1.0.21),
sed (= 4.7-1),
sensible-utils (= 0.0.12+nmu1),
sysvinit-utils (= 2.96-5),
tar (= 1.30+dfsg-7),
ucf (= 3.0043),
util-linux (= 2.36-3),
xz-utils (= 5.2.4-1),
zlib1g (= 1:1.2.11.dfsg-2)
Environment:
DEB_BUILD_OPTIONS="parallel=4"
LANG="en_GB.UTF-8"
LC_ALL="C.UTF-8"
SOURCE_DATE_EPOCH="1605794192"
+------------------------------------------------------------------------------+
| Package contents |
+------------------------------------------------------------------------------+
bmon-dbgsym_4.0-7_armhf.deb
---------------------------
new Debian package, version 2.0.
size 114232 bytes: control archive=516 bytes.
325 bytes, 12 lines control
106 bytes, 1 lines md5sums
Package: bmon-dbgsym
Source: bmon
Version: 1:4.0-7
Auto-Built-Package: debug-symbols
Architecture: armhf
Maintainer: Patrick Matthäi <pmatthaei@debian.org>
Installed-Size: 141
Depends: bmon (= 1:4.0-7)
Section: debug
Priority: optional
Description: debug symbols for bmon
Build-Ids: 80b491a175b69bfaf3fbdfd8e5deb69a9d008b01
drwxr-xr-x root/root 0 2020-11-19 13:56 ./
drwxr-xr-x root/root 0 2020-11-19 13:56 ./usr/
drwxr-xr-x root/root 0 2020-11-19 13:56 ./usr/lib/
drwxr-xr-x root/root 0 2020-11-19 13:56 ./usr/lib/debug/
drwxr-xr-x root/root 0 2020-11-19 13:56 ./usr/lib/debug/.build-id/
drwxr-xr-x root/root 0 2020-11-19 13:56 ./usr/lib/debug/.build-id/80/
-rw-r--r-- root/root 133372 2020-11-19 13:56 ./usr/lib/debug/.build-id/80/b491a175b69bfaf3fbdfd8e5deb69a9d008b01.debug
drwxr-xr-x root/root 0 2020-11-19 13:56 ./usr/share/
drwxr-xr-x root/root 0 2020-11-19 13:56 ./usr/share/doc/
lrwxrwxrwx root/root 0 2020-11-19 13:56 ./usr/share/doc/bmon-dbgsym -> bmon
bmon_4.0-7_armhf.deb
--------------------
new Debian package, version 2.0.
size 39412 bytes: control archive=944 bytes.
15 bytes, 1 lines conffiles
743 bytes, 17 lines control
384 bytes, 6 lines md5sums
Package: bmon
Version: 1:4.0-7
Architecture: armhf
Maintainer: Patrick Matthäi <pmatthaei@debian.org>
Installed-Size: 110
Depends: libc6 (>= 2.17), libconfuse2 (>= 3.2.1~), libncursesw6 (>= 6), libnl-3-200 (>= 3.2.7), libnl-route-3-200 (>= 3.2.7), libtinfo6 (>= 6)
Section: net
Priority: optional
Homepage: http://www.infradead.org/~tgr/bmon/
Description: portable bandwidth monitor and rate estimator
bmon is a commandline bandwidth monitor which supports various output
methods including an interactive curses interface, lightweight HTML output but
also simple ASCII output.
.
Statistics may be distributed over a network using multicast or unicast and
collected at some point to generate a summary of statistics for a set of
nodes.
drwxr-xr-x root/root 0 2020-11-19 13:56 ./
drwxr-xr-x root/root 0 2020-11-19 13:56 ./etc/
-rw-r--r-- root/root 2039 2016-12-13 10:56 ./etc/bmon.conf
drwxr-xr-x root/root 0 2020-11-19 13:56 ./usr/
drwxr-xr-x root/root 0 2020-11-19 13:56 ./usr/bin/
-rwxr-xr-x root/root 86248 2020-11-19 13:56 ./usr/bin/bmon
drwxr-xr-x root/root 0 2020-11-19 13:56 ./usr/share/
drwxr-xr-x root/root 0 2020-11-19 13:56 ./usr/share/doc/
drwxr-xr-x root/root 0 2020-11-19 13:56 ./usr/share/doc/bmon/
-rw-r--r-- root/root 2060 2020-11-19 13:56 ./usr/share/doc/bmon/changelog.Debian.gz
-rw-r--r-- root/root 664 2016-12-13 10:56 ./usr/share/doc/bmon/changelog.gz
-rw-r--r-- root/root 1899 2020-11-19 13:56 ./usr/share/doc/bmon/copyright
drwxr-xr-x root/root 0 2020-11-19 13:56 ./usr/share/doc/bmon/examples/
-rw-r--r-- root/root 2039 2020-11-19 13:56 ./usr/share/doc/bmon/examples/bmon.conf
drwxr-xr-x root/root 0 2020-11-19 13:56 ./usr/share/man/
drwxr-xr-x root/root 0 2020-11-19 13:56 ./usr/share/man/man8/
-rw-r--r-- root/root 2309 2020-11-19 13:56 ./usr/share/man/man8/bmon.8.gz
+------------------------------------------------------------------------------+
| Post Build |
+------------------------------------------------------------------------------+
+------------------------------------------------------------------------------+
| Cleanup |
+------------------------------------------------------------------------------+
Purging /<<BUILDDIR>>
Not cleaning session: cloned chroot in use
+------------------------------------------------------------------------------+
| Summary |
+------------------------------------------------------------------------------+
Build Architecture: armhf
Build Type: any
Build-Space: 3608
Build-Time: 44
Distribution: bullseye-staging
Host Architecture: armhf
Install-Time: 312
Job: bmon_1:4.0-7
Machine Architecture: armhf
Package: bmon
Package-Time: 379
Source-Version: 1:4.0-7
Space: 3608
Status: successful
Version: 1:4.0-7
--------------------------------------------------------------------------------
Finished at 2020-11-25T05:59:59Z
Build needed 00:06:19, 3608k disk space