gpx →
0~20140109+git3570fc9-2 →
armhf → 2014-07-05 07:57:59
sbuild (Debian sbuild) 0.63.2 (18 Aug 2012) on bm-wb-03
╔══════════════════════════════════════════════════════════════════════════════╗
║ gpx 0~20140109+git3570fc9-2 (armhf) 05 Jul 2014 07:49 ║
╚══════════════════════════════════════════════════════════════════════════════╝
Package: gpx
Version: 0~20140109+git3570fc9-2
Source Version: 0~20140109+git3570fc9-2
Distribution: jessie-staging
Machine Architecture: armhf
Host Architecture: armhf
Build Architecture: armhf
I: NOTICE: Log filtering will replace 'build/gpx-MMcL3h/gpx-0~20140109+git3570fc9' with '«PKGBUILDDIR»'
I: NOTICE: Log filtering will replace 'build/gpx-MMcL3h' with '«BUILDDIR»'
I: NOTICE: Log filtering will replace 'var/lib/schroot/mount/jessie-staging-armhf-sbuild-5c39fd59-1f03-4333-805c-214069ffd7c5' with '«CHROOT»'
┌──────────────────────────────────────────────────────────────────────────────┐
│ Update chroot │
└──────────────────────────────────────────────────────────────────────────────┘
Get:1 http://172.17.0.1 jessie-staging InRelease [11.3 kB]
Get:2 http://172.17.0.1 jessie-staging/main Sources [7366 kB]
Get:3 http://172.17.0.1 jessie-staging/main armhf Packages [8308 kB]
Ign http://172.17.0.1 jessie-staging/main Translation-en
Fetched 15.7 MB in 31s (503 kB/s)
Reading package lists...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Fetch source files │
└──────────────────────────────────────────────────────────────────────────────┘
Check APT
─────────
Checking available source versions...
Download source files with APT
──────────────────────────────
Reading package lists...
Building dependency tree...
Reading state information...
NOTICE: 'gpx' packaging is maintained in the 'Git' version control system at:
git://git.debian.org/3dprinter/packages/gpx.git
Need to get 65.5 kB of source archives.
Get:1 http://172.17.0.1/private/ jessie-staging/main gpx 0~20140109+git3570fc9-2 (dsc) [1902 B]
Get:2 http://172.17.0.1/private/ jessie-staging/main gpx 0~20140109+git3570fc9-2 (tar) [60.1 kB]
Get:3 http://172.17.0.1/private/ jessie-staging/main gpx 0~20140109+git3570fc9-2 (diff) [3576 B]
Fetched 65.5 kB in 0s (1201 kB/s)
Download complete and in download only mode
Check arch
──────────
Merged Build-Depends: build-essential, fakeroot
Filtered Build-Depends: build-essential, fakeroot
dpkg-deb: building package `sbuild-build-depends-core-dummy' in `/«BUILDDIR»/resolver-DS0RQa/apt_archive/sbuild-build-depends-core-dummy.deb'.
OK
Reading package lists...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Install core build dependencies (apt-based resolver) │
└──────────────────────────────────────────────────────────────────────────────┘
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
sbuild-build-depends-core-dummy
debconf: delaying package configuration, since apt-utils is not installed
0 upgraded, 1 newly installed, 0 to remove and 42 not upgraded.
Need to get 0 B/818 B of archives.
After this operation, 0 B of additional disk space will be used.
Selecting previously unselected package sbuild-build-depends-core-dummy.
(Reading database ... 11817 files and directories currently installed.)
Preparing to unpack .../sbuild-build-depends-core-dummy.deb ...
Unpacking sbuild-build-depends-core-dummy (0.invalid.0) ...
Setting up sbuild-build-depends-core-dummy (0.invalid.0) ...
Merged Build-Depends: base-files, base-passwd, bash, bsdutils, coreutils, dash, debianutils, diffutils, dpkg, e2fsprogs, findutils, grep, gzip, hostname, libc-bin, login, mount, ncurses-base, ncurses-bin, perl-base, sed, sysvinit, sysvinit-utils, tar, util-linux, libc6-dev | libc-dev, gcc (>= 4:4.4.3), g++ (>= 4:4.4.3), make, dpkg-dev (>= 1.13.5), debhelper (>= 9.0.0), python
Filtered Build-Depends: base-files, base-passwd, bash, bsdutils, coreutils, dash, debianutils, diffutils, dpkg, e2fsprogs, findutils, grep, gzip, hostname, libc-bin, login, mount, ncurses-base, ncurses-bin, perl-base, sed, sysvinit, sysvinit-utils, tar, util-linux, libc6-dev, gcc (>= 4:4.4.3), g++ (>= 4:4.4.3), make, dpkg-dev (>= 1.13.5), debhelper (>= 9.0.0), python
dpkg-deb: building package `sbuild-build-depends-gpx-dummy' in `/«BUILDDIR»/resolver-QOTzrh/apt_archive/sbuild-build-depends-gpx-dummy.deb'.
OK
Reading package lists...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Install gpx build dependencies (apt-based resolver) │
└──────────────────────────────────────────────────────────────────────────────┘
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
bsdmainutils debhelper file gettext gettext-base groff-base intltool-debian
libasprintf0c2 libcroco3 libexpat1 libffi6 libglib2.0-0 libmagic1
libpipeline1 libpython-stdlib libpython2.7-minimal libpython2.7-stdlib
libsqlite3-0 libssl1.0.0 libunistring0 libxml2 man-db mime-support
po-debconf python python-minimal python2.7 python2.7-minimal
Suggested packages:
wamerican wordlist whois vacation dh-make gettext-doc groff less www-browser
libmail-box-perl python-doc python-tk python2.7-doc binfmt-support
Recommended packages:
curl wget lynx-cur autopoint libasprintf-dev libgettextpo-dev
libglib2.0-data shared-mime-info xml-core libmail-sendmail-perl
The following NEW packages will be installed:
bsdmainutils debhelper file gettext gettext-base groff-base intltool-debian
libasprintf0c2 libcroco3 libexpat1 libffi6 libglib2.0-0 libmagic1
libpipeline1 libpython-stdlib libpython2.7-minimal libpython2.7-stdlib
libsqlite3-0 libssl1.0.0 libunistring0 libxml2 man-db mime-support
po-debconf python python-minimal python2.7 python2.7-minimal
sbuild-build-depends-gpx-dummy
0 upgraded, 29 newly installed, 0 to remove and 42 not upgraded.
Need to get 13.3 MB/13.3 MB of archives.
After this operation, 41.2 MB of additional disk space will be used.
Get:1 http://172.17.0.1/private/ jessie-staging/main libpipeline1 armhf 1.3.0-1 [21.1 kB]
Get:2 http://172.17.0.1/private/ jessie-staging/main libssl1.0.0 armhf 1.0.1h-3 [830 kB]
Get:3 http://172.17.0.1/private/ jessie-staging/main groff-base armhf 1.22.2-5 [962 kB]
Get:4 http://172.17.0.1/private/ jessie-staging/main bsdmainutils armhf 9.0.5 [206 kB]
Get:5 http://172.17.0.1/private/ jessie-staging/main man-db armhf 2.6.7.1-1 [964 kB]
Get:6 http://172.17.0.1/private/ jessie-staging/main libasprintf0c2 armhf 0.18.3.2-2 [29.2 kB]
Get:7 http://172.17.0.1/private/ jessie-staging/main libmagic1 armhf 1:5.19-1 [232 kB]
Get:8 http://172.17.0.1/private/ jessie-staging/main libsqlite3-0 armhf 3.8.5-2 [357 kB]
Get:9 http://172.17.0.1/private/ jessie-staging/main libxml2 armhf 2.9.1+dfsg1-3 [836 kB]
Get:10 http://172.17.0.1/private/ jessie-staging/main libpython2.7-minimal armhf 2.7.7-2 [347 kB]
Get:11 http://172.17.0.1/private/ jessie-staging/main python2.7-minimal armhf 2.7.7-2 [1093 kB]
Get:12 http://172.17.0.1/private/ jessie-staging/main libffi6 armhf 3.1-2 [18.1 kB]
Get:13 http://172.17.0.1/private/ jessie-staging/main libglib2.0-0 armhf 2.40.0-3 [2247 kB]
Get:14 http://172.17.0.1/private/ jessie-staging/main libcroco3 armhf 0.6.8-2 [119 kB]
Get:15 http://172.17.0.1/private/ jessie-staging/main libexpat1 armhf 2.1.0-6 [60.2 kB]
Get:16 http://172.17.0.1/private/ jessie-staging/main libunistring0 armhf 0.9.3-5 [408 kB]
Get:17 http://172.17.0.1/private/ jessie-staging/main file armhf 1:5.19-1 [57.7 kB]
Get:18 http://172.17.0.1/private/ jessie-staging/main gettext-base armhf 0.18.3.2-2 [112 kB]
Get:19 http://172.17.0.1/private/ jessie-staging/main mime-support all 3.56 [35.5 kB]
Get:20 http://172.17.0.1/private/ jessie-staging/main libpython2.7-stdlib armhf 2.7.7-2 [1830 kB]
Get:21 http://172.17.0.1/private/ jessie-staging/main python2.7 armhf 2.7.7-2 [242 kB]
Get:22 http://172.17.0.1/private/ jessie-staging/main python-minimal armhf 2.7.6-2 [39.4 kB]
Get:23 http://172.17.0.1/private/ jessie-staging/main libpython-stdlib armhf 2.7.6-2 [18.9 kB]
Get:24 http://172.17.0.1/private/ jessie-staging/main python armhf 2.7.6-2 [150 kB]
Get:25 http://172.17.0.1/private/ jessie-staging/main gettext armhf 0.18.3.2-2 [1136 kB]
Get:26 http://172.17.0.1/private/ jessie-staging/main intltool-debian all 0.35.0+20060710.1 [29.8 kB]
Get:27 http://172.17.0.1/private/ jessie-staging/main po-debconf all 1.0.16+nmu3 [220 kB]
Get:28 http://172.17.0.1/private/ jessie-staging/main debhelper all 9.20140613 [692 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 13.3 MB in 3s (4254 kB/s)
Selecting previously unselected package libpipeline1:armhf.
(Reading database ... 11817 files and directories currently installed.)
Preparing to unpack .../libpipeline1_1.3.0-1_armhf.deb ...
Unpacking libpipeline1:armhf (1.3.0-1) ...
Selecting previously unselected package libssl1.0.0:armhf.
Preparing to unpack .../libssl1.0.0_1.0.1h-3_armhf.deb ...
Unpacking libssl1.0.0:armhf (1.0.1h-3) ...
Selecting previously unselected package groff-base.
Preparing to unpack .../groff-base_1.22.2-5_armhf.deb ...
Unpacking groff-base (1.22.2-5) ...
Selecting previously unselected package bsdmainutils.
Preparing to unpack .../bsdmainutils_9.0.5_armhf.deb ...
Unpacking bsdmainutils (9.0.5) ...
Selecting previously unselected package man-db.
Preparing to unpack .../man-db_2.6.7.1-1_armhf.deb ...
Unpacking man-db (2.6.7.1-1) ...
Selecting previously unselected package libasprintf0c2:armhf.
Preparing to unpack .../libasprintf0c2_0.18.3.2-2_armhf.deb ...
Unpacking libasprintf0c2:armhf (0.18.3.2-2) ...
Selecting previously unselected package libmagic1:armhf.
Preparing to unpack .../libmagic1_1%3a5.19-1_armhf.deb ...
Unpacking libmagic1:armhf (1:5.19-1) ...
Selecting previously unselected package libsqlite3-0:armhf.
Preparing to unpack .../libsqlite3-0_3.8.5-2_armhf.deb ...
Unpacking libsqlite3-0:armhf (3.8.5-2) ...
Selecting previously unselected package libxml2:armhf.
Preparing to unpack .../libxml2_2.9.1+dfsg1-3_armhf.deb ...
Unpacking libxml2:armhf (2.9.1+dfsg1-3) ...
Selecting previously unselected package libpython2.7-minimal:armhf.
Preparing to unpack .../libpython2.7-minimal_2.7.7-2_armhf.deb ...
Unpacking libpython2.7-minimal:armhf (2.7.7-2) ...
Selecting previously unselected package python2.7-minimal.
Preparing to unpack .../python2.7-minimal_2.7.7-2_armhf.deb ...
Unpacking python2.7-minimal (2.7.7-2) ...
Selecting previously unselected package libffi6:armhf.
Preparing to unpack .../libffi6_3.1-2_armhf.deb ...
Unpacking libffi6:armhf (3.1-2) ...
Selecting previously unselected package libglib2.0-0:armhf.
Preparing to unpack .../libglib2.0-0_2.40.0-3_armhf.deb ...
Unpacking libglib2.0-0:armhf (2.40.0-3) ...
Selecting previously unselected package libcroco3:armhf.
Preparing to unpack .../libcroco3_0.6.8-2_armhf.deb ...
Unpacking libcroco3:armhf (0.6.8-2) ...
Selecting previously unselected package libexpat1:armhf.
Preparing to unpack .../libexpat1_2.1.0-6_armhf.deb ...
Unpacking libexpat1:armhf (2.1.0-6) ...
Selecting previously unselected package libunistring0:armhf.
Preparing to unpack .../libunistring0_0.9.3-5_armhf.deb ...
Unpacking libunistring0:armhf (0.9.3-5) ...
Selecting previously unselected package file.
Preparing to unpack .../file_1%3a5.19-1_armhf.deb ...
Unpacking file (1:5.19-1) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../gettext-base_0.18.3.2-2_armhf.deb ...
Unpacking gettext-base (0.18.3.2-2) ...
Selecting previously unselected package mime-support.
Preparing to unpack .../mime-support_3.56_all.deb ...
Unpacking mime-support (3.56) ...
Selecting previously unselected package libpython2.7-stdlib:armhf.
Preparing to unpack .../libpython2.7-stdlib_2.7.7-2_armhf.deb ...
Unpacking libpython2.7-stdlib:armhf (2.7.7-2) ...
Selecting previously unselected package python2.7.
Preparing to unpack .../python2.7_2.7.7-2_armhf.deb ...
Unpacking python2.7 (2.7.7-2) ...
Selecting previously unselected package python-minimal.
Preparing to unpack .../python-minimal_2.7.6-2_armhf.deb ...
Unpacking python-minimal (2.7.6-2) ...
Selecting previously unselected package libpython-stdlib:armhf.
Preparing to unpack .../libpython-stdlib_2.7.6-2_armhf.deb ...
Unpacking libpython-stdlib:armhf (2.7.6-2) ...
Selecting previously unselected package python.
Preparing to unpack .../python_2.7.6-2_armhf.deb ...
Unpacking python (2.7.6-2) ...
Selecting previously unselected package gettext.
Preparing to unpack .../gettext_0.18.3.2-2_armhf.deb ...
Unpacking gettext (0.18.3.2-2) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../intltool-debian_0.35.0+20060710.1_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.1) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../po-debconf_1.0.16+nmu3_all.deb ...
Unpacking po-debconf (1.0.16+nmu3) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../debhelper_9.20140613_all.deb ...
Unpacking debhelper (9.20140613) ...
Selecting previously unselected package sbuild-build-depends-gpx-dummy.
Preparing to unpack .../sbuild-build-depends-gpx-dummy.deb ...
Unpacking sbuild-build-depends-gpx-dummy (0.invalid.0) ...
Setting up libpipeline1:armhf (1.3.0-1) ...
Setting up libssl1.0.0:armhf (1.0.1h-3) ...
Setting up groff-base (1.22.2-5) ...
Setting up bsdmainutils (9.0.5) ...
update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode
update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode
Setting up man-db (2.6.7.1-1) ...
Not building database; man-db/auto-update is not 'true'.
Setting up libasprintf0c2:armhf (0.18.3.2-2) ...
Setting up libmagic1:armhf (1:5.19-1) ...
Setting up libsqlite3-0:armhf (3.8.5-2) ...
Setting up libxml2:armhf (2.9.1+dfsg1-3) ...
Setting up libpython2.7-minimal:armhf (2.7.7-2) ...
Setting up python2.7-minimal (2.7.7-2) ...
Setting up libffi6:armhf (3.1-2) ...
Setting up libglib2.0-0:armhf (2.40.0-3) ...
No schema files found: doing nothing.
Setting up libcroco3:armhf (0.6.8-2) ...
Setting up libexpat1:armhf (2.1.0-6) ...
Setting up libunistring0:armhf (0.9.3-5) ...
Setting up file (1:5.19-1) ...
Setting up gettext-base (0.18.3.2-2) ...
Setting up mime-support (3.56) ...
Setting up libpython2.7-stdlib:armhf (2.7.7-2) ...
Setting up python2.7 (2.7.7-2) ...
Setting up python-minimal (2.7.6-2) ...
Setting up libpython-stdlib:armhf (2.7.6-2) ...
Setting up python (2.7.6-2) ...
Setting up gettext (0.18.3.2-2) ...
Setting up intltool-debian (0.35.0+20060710.1) ...
Setting up po-debconf (1.0.16+nmu3) ...
Setting up debhelper (9.20140613) ...
Setting up sbuild-build-depends-gpx-dummy (0.invalid.0) ...
Processing triggers for libc-bin (2.19-1) ...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Build environment │
└──────────────────────────────────────────────────────────────────────────────┘
Kernel: Linux 3.13-1-armmp armhf (armv7l)
Toolchain package versions: binutils_2.24.51.20140604-3 dpkg-dev_1.17.10 g++-4.9_4.9.0-6 gcc-4.8_4.8.3-3 gcc-4.9_4.9.0-6 libc6-dev_2.19-1 libstdc++-4.9-dev_4.9.0-6 libstdc++6_4.9.0-6 linux-libc-dev_3.14.4-1+rpi1
Package versions: apt_1.0.3 base-files_7.3+rpi1 base-passwd_3.5.28 bash_4.3-7 binutils_2.24.51.20140604-3 bsdmainutils_9.0.5 bsdutils_1:2.20.1-5.8 build-essential_11.6 bzip2_1.0.6-5 coreutils_8.21-1.2 cpio_2.11+dfsg-2 cpp_4:4.9.0-3 cpp-4.8_4.8.3-3 cpp-4.9_4.9.0-6 dash_0.5.7-4 debconf_1.5.53 debconf-i18n_1.5.53 debfoster_2.7-1.2 debhelper_9.20140613 debianutils_4.4 diffutils_1:3.3-1 dpkg_1.17.10 dpkg-dev_1.17.10 e2fslibs_1.42.10-1 e2fsprogs_1.42.10-1 fakeroot_1.18.4-2 file_1:5.19-1 findutils_4.4.2-8 g++_4:4.9.0-3 g++-4.9_4.9.0-6 gcc_4:4.9.0-3 gcc-4.5-base_4.5.3-12+rpi1 gcc-4.6-base_4.6.4-5+rpi1 gcc-4.7-base_4.7.3-11+rpi1 gcc-4.8_4.8.3-3 gcc-4.8-base_4.8.3-3 gcc-4.9_4.9.0-6 gcc-4.9-base_4.9.0-6 gettext_0.18.3.2-2 gettext-base_0.18.3.2-2 gnupg_1.4.16-1.1 gpgv_1.4.16-1.1 grep_2.18-2 groff-base_1.22.2-5 gzip_1.6-3 hostname_3.15 init-system-helpers_1.18 initramfs-tools_0.115 initscripts_2.88dsf-53.2 insserv_1.14.0-5 intltool-debian_0.35.0+20060710.1 klibc-utils_2.0.3-1+rpi1 kmod_16-2 libacl1_2.2.52-1 libapt-pkg4.12_1.0.3 libasan0_4.8.3-3 libasan1_4.9.0-6 libasprintf0c2_0.18.3.2-2 libatomic1_4.9.0-6 libattr1_1:2.4.47-1 libaudit-common_1:2.3.6-1 libaudit1_1:2.3.6-1 libblkid1_2.20.1-5.8 libbz2-1.0_1.0.6-5 libc-bin_2.19-1 libc-dev-bin_2.19-1 libc6_2.19-1 libc6-dev_2.19-1 libcap2_1:2.22-1.2 libcloog-isl4_0.18.2-1 libcomerr2_1.42.10-1 libcroco3_0.6.8-2 libdb5.1_5.1.29-6 libdb5.3_5.3.28-3 libdbus-1-3_1.8.4-1 libdpkg-perl_1.17.10 libexpat1_2.1.0-6 libffi6_3.1-2 libgc1c2_1:7.2d-6 libgcc-4.8-dev_4.8.3-3 libgcc-4.9-dev_4.9.0-6 libgcc1_1:4.9.0-6 libgdbm3_1.8.3-12 libglib2.0-0_2.40.0-3 libgmp10_2:6.0.0+dfsg-4+rpi1 libgomp1_4.9.0-6 libisl10_0.12.2-1 libklibc_2.0.3-1+rpi1 libkmod2_16-2 liblocale-gettext-perl_1.05-8 liblzma5_5.1.1alpha+20120614-2 libmagic1_1:5.19-1 libmount1_2.20.1-5.8 libmpc3_1.0.1-1 libmpfr4_3.1.2-1 libncurses5_5.9+20140118-1 libncursesw5_5.9+20140118-1 libpam-modules_1.1.8-3 libpam-modules-bin_1.1.8-3 libpam-runtime_1.1.8-3 libpam0g_1.1.8-3 libpcre3_1:8.31-5 libpipeline1_1.3.0-1 libprocps0_1:3.3.4-2 libprocps3_1:3.3.9-5 libpython-stdlib_2.7.6-2 libpython2.7-minimal_2.7.7-2 libpython2.7-stdlib_2.7.7-2 libreadline6_6.3-6 libselinux1_2.3-1 libsemanage-common_2.3-1 libsemanage1_2.3-1 libsepol1_2.3-1 libslang2_2.2.4-16 libsqlite3-0_3.8.5-2 libss2_1.42.10-1 libssl1.0.0_1.0.1h-3 libstdc++-4.9-dev_4.9.0-6 libstdc++6_4.9.0-6 libtext-charwidth-perl_0.04-7+b3 libtext-iconv-perl_1.7-5+b3 libtext-wrapi18n-perl_0.06-7 libtimedate-perl_2.3000-2 libtinfo5_5.9+20140118-1 libubsan0_4.9.0-6 libudev1_204-8 libunistring0_0.9.3-5 libusb-0.1-4_2:0.1.12-23.3 libustr-1.0-1_1.0.4-3 libuuid1_2.20.1-5.8 libxml2_2.9.1+dfsg1-3 linux-libc-dev_3.14.4-1+rpi1 login_1:4.2-2 lsb-base_4.1+Debian12+rpi1 make_4.0-8 makedev_2.3.1-93 man-db_2.6.7.1-1 mawk_1.3.3-17 mime-support_3.56 mount_2.20.1-5.8 multiarch-support_2.19-1 nano_2.2.6-1.1 ncurses-base_5.9+20140118-1 ncurses-bin_5.9+20140118-1 passwd_1:4.2-2 patch_2.7.1-5 perl_5.18.2-4 perl-base_5.18.2-4 perl-modules_5.18.2-4 plymouth_0.8.8-17 po-debconf_1.0.16+nmu3 procps_1:3.3.9-5 python_2.7.6-2 python-minimal_2.7.6-2 python2.7_2.7.7-2 python2.7-minimal_2.7.7-2 raspbian-archive-keyring_20120528.2 readline-common_6.3-6 sbuild-build-depends-core-dummy_0.invalid.0 sbuild-build-depends-gpx-dummy_0.invalid.0 sed_4.2.2-4 sensible-utils_0.0.9 startpar_0.59-3 sysv-rc_2.88dsf-53.2 sysvinit_2.88dsf-53.2 sysvinit-core_2.88dsf-53.2 sysvinit-utils_2.88dsf-53.2 tar_1.27.1-2 tzdata_2014e-1 udev_204-8 util-linux_2.20.1-5.8 xz-utils_5.1.1alpha+20120614-2 zlib1g_1:1.2.8.dfsg-1+rpi1
┌──────────────────────────────────────────────────────────────────────────────┐
│ Build │
└──────────────────────────────────────────────────────────────────────────────┘
Unpack source
─────────────
gpgv: keyblock resource `/sbuild-nonexistent/.gnupg/trustedkeys.gpg': file open error
gpgv: Signature made Mon Jun 30 03:26:52 2014 UTC using RSA key ID 588752A1
gpgv: Can't check signature: public key not found
dpkg-source: warning: failed to verify signature on ./gpx_0~20140109+git3570fc9-2.dsc
dpkg-source: info: extracting gpx in gpx-0~20140109+git3570fc9
dpkg-source: info: unpacking gpx_0~20140109+git3570fc9.orig.tar.gz
dpkg-source: info: unpacking gpx_0~20140109+git3570fc9-2.debian.tar.xz
dpkg-source: info: applying Fix-paths-to-lint.gcode-and-s3g-decompiler.patch
dpkg-source: info: applying Use-standard-CFLAGS-LDFLAGS-variable-names-and-fix-l.patch
Check disc space
────────────────
Sufficient free space for build
User Environment
────────────────
APT_CONFIG=/var/lib/sbuild/apt.conf
DEB_BUILD_OPTIONS=parallel=4
HOME=/sbuild-nonexistent
LANG=en_GB.UTF-8
LC_ALL=POSIX
LOGNAME=root
MAIL=/var/mail/root
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
PWD=/root
SCHROOT_ALIAS_NAME=jessie-staging-armhf-sbuild
SCHROOT_CHROOT_NAME=jessie-staging-armhf-sbuild
SCHROOT_COMMAND=env
SCHROOT_GID=109
SCHROOT_GROUP=buildd
SCHROOT_SESSION_ID=jessie-staging-armhf-sbuild-5c39fd59-1f03-4333-805c-214069ffd7c5
SCHROOT_UID=104
SCHROOT_USER=buildd
SHELL=/bin/sh
SHLVL=1
SSH_CLIENT=172.17.0.6 34749 22
SSH_CONNECTION=172.17.0.6 34749 172.17.2.3 22
SSH_TTY=/dev/pts/0
TERM=xterm
USER=buildd
_=/etc/init.d/buildd
dpkg-buildpackage
─────────────────
dpkg-buildpackage: source package gpx
dpkg-buildpackage: source version 0~20140109+git3570fc9-2
dpkg-buildpackage: source distribution unstable
dpkg-source --before-build gpx-0~20140109+git3570fc9
dpkg-buildpackage: host architecture armhf
fakeroot debian/rules clean
dh clean
dh_testdir
dh_auto_clean
make[1]: Entering directory '/«BUILDDIR»/gpx-0~20140109+git3570fc9'
rm -f gpx getopt.o gpx.o gpx-main.o
rm -f gpx-osx-2.0.tar.gz
rm -f gpx-osx-2.0.zip
rm -f gpx-osx-2.0.dmg
make[1]: Leaving directory '/«BUILDDIR»/gpx-0~20140109+git3570fc9'
dh_clean
debian/rules build-arch
dh build-arch
dh_testdir -a
dh_auto_configure -a
dh_auto_build -a
make[1]: Entering directory '/«BUILDDIR»/gpx-0~20140109+git3570fc9'
cc -c -w getopt.c -o getopt.o
cc -c -w gpx.c -o gpx.o
cc -c -w gpx-main.c -o gpx-main.o
cc -Wl,-z,relro getopt.o gpx.o gpx-main.o -lm -o gpx
make[1]: Leaving directory '/«BUILDDIR»/gpx-0~20140109+git3570fc9'
dh_auto_test -a
make[1]: Entering directory '/«BUILDDIR»/gpx-0~20140109+git3570fc9'
./gpx examples/lint.gcode
(line 27) Syntax warning: nested comment detected
(line 148) Semantic warning: T1 cannot select non-existant extruder
(line 153) Semantic warning: T1 cannot select non-existant extruder
(line 185) Semantic warning: T1 cannot select non-existant extruder
(line 206) Semantic warning: T1 cannot select non-existant extruder
(line 211) Semantic warning: T1 cannot select non-existant extruder
(line 216) Semantic warning: T1 cannot select non-existant extruder
(line 221) Semantic warning: T1 cannot select non-existant extruder
(line 226) Semantic warning: T1 cannot select non-existant extruder
(line 251) Semantic warning: M140 cannot select non-existant heated build platform
(line 275) Semantic warning: T1 cannot select non-existant extruder
(line 27) Syntax warning: nested comment detected
(line 148) Semantic warning: T1 cannot select non-existant extruder
(line 153) Semantic warning: T1 cannot select non-existant extruder
(line 185) Semantic warning: T1 cannot select non-existant extruder
(line 206) Semantic warning: T1 cannot select non-existant extruder
(line 211) Semantic warning: T1 cannot select non-existant extruder
(line 216) Semantic warning: T1 cannot select non-existant extruder
(line 221) Semantic warning: T1 cannot select non-existant extruder
(line 226) Semantic warning: T1 cannot select non-existant extruder
(line 251) Semantic warning: M140 cannot select non-existant heated build platform
(line 275) Semantic warning: T1 cannot select non-existant extruder
python scripts/s3g-decompiler.py examples/lint.x3g
0: [149] Display message, options 0x2 at 0,0 timeout 0
'M103 - extruder off'
1: [137] Enable/disable steppers 8
2: [149] Display message, options 0x2 at 0,0 timeout 0
'M73 - start build'
3: [153] Start build, steps 0: lint
4: [150] Set build percent 0%, ignore 0
5: [134] Change extruder 0
6: [149] Display message, options 0x2 at 0,0 timeout 0
'G0 - rapid move'
7: [139] Absolute move to (886,886,4000,-96,0) at DDA 128
8: [149] Display message, options 0x2 at 0,0 timeout 0
'G0 - rapid move-f'
9: [155] Move to (-886,-886,-4000,-96,0) dda_rate: 3849 (relative: 18) distance: 34.641018 feedrateX64: 1066
10: [149] Display message, options 0x2 at 0,0 timeout 0
'G1 - coord move'
11: [155] Move to (886,886,4000,-96,0) dda_rate: 3849 (relative: 18) distance: 34.641018 feedrateX64: 1066
12: [149] Display message, options 0x2 at 0,0 timeout 0
'G1 - coord move-f'
13: [155] Move to (886,886,4000,-97,0) dda_rate: 2560 (relative: 18) distance: 1.000000 feedrateX64: 1706
14: [149] Display message, options 0x2 at 0,0 timeout 0
'G4 - dwell'
15: [133] Delay of 1000 us
16: [149] Display message, options 0x2 at 0,0 timeout 0
'G10 - set offsets'
17: [149] Display message, options 0x2 at 0,0 timeout 0
'G21 - metric units'
18: [149] Display message, options 0x2 at 0,0 timeout 0
'G28 - home to max'
19: [132] Home maximum on 3, feedrate 383, timeout 20 s
20: [149] Display message, options 0x2 at 0,0 timeout 0
'G54 - use G10 P1'
21: [139] Absolute move to (886,886,4000,-578,0) at DDA 128
22: [149] Display message, options 0x2 at 0,0 timeout 0
'G55 - use G10 P2'
23: [155] Move to (1771,1771,8000,-97,0) dda_rate: 7698 (relative: 18) distance: 17.320509 feedrateX64: 2133
24: [149] Display message, options 0x2 at 0,0 timeout 0
'G56 - use G10 P3'
25: [155] Move to (2657,2657,12000,-96,0) dda_rate: 7698 (relative: 18) distance: 17.320509 feedrateX64: 2133
26: [149] Display message, options 0x2 at 0,0 timeout 0
'G57 - use G10 P4'
27: [155] Move to (3543,3543,16000,-96,0) dda_rate: 7698 (relative: 18) distance: 17.320509 feedrateX64: 2133
28: [149] Display message, options 0x2 at 0,0 timeout 0
'G58 - use G10 P5'
29: [155] Move to (4429,4429,20000,-96,0) dda_rate: 7698 (relative: 18) distance: 17.320509 feedrateX64: 2133
30: [149] Display message, options 0x2 at 0,0 timeout 0
'G59 - use G10 P6'
31: [155] Move to (5314,5314,24000,-97,0) dda_rate: 7698 (relative: 18) distance: 17.320509 feedrateX64: 2133
32: [149] Display message, options 0x2 at 0,0 timeout 0
'G53 - machine zero'
33: [155] Move to (0,0,0,-96,0) dda_rate: 7698 (relative: 18) distance: 103.923050 feedrateX64: 2133
34: [149] Display message, options 0x2 at 0,0 timeout 0
'G91 - relative'
35: [155] Move to (886,886,4000,1059,0) dda_rate: 7698 (relative: 18) distance: 17.320509 feedrateX64: 2133
36: [149] Display message, options 0x2 at 0,0 timeout 0
'G90 - absolute'
37: [155] Move to (0,0,0,-1252,0) dda_rate: 7698 (relative: 18) distance: 17.320509 feedrateX64: 2133
38: [149] Display message, options 0x2 at 0,0 timeout 0
'G92 - define pos'
39: [140] Set extended position as (2657,2657,12000,0,0)
40: [155] Move to (0,0,0,0,0) dda_rate: 7698 (relative: 18) distance: 51.961525 feedrateX64: 2133
41: [149] Display message, options 0x2 at 0,0 timeout 0
'G130 - set pots'
42: [145] Set pot axis 0 to 20
43: [145] Set pot axis 1 to 20
44: [145] Set pot axis 2 to 20
45: [145] Set pot axis 3 to 20
46: [145] Set pot axis 4 to 20
47: [149] Display message, options 0x2 at 0,0 timeout 0
'G130 - home xy max'
48: [132] Home maximum on 3, feedrate 383, timeout 20 s
49: [149] Display message, options 0x2 at 0,0 timeout 0
'G130 - home xy min'
50: [131] Home minimum on 4, feedrate 136, timeout 20 s
51: [149] Display message, options 0x2 at 0,0 timeout 0
'M104 - set temp'
52: [136] Extruder(0) [3] set target temperature = 230
53: [136] Extruder(0) [3] set target temperature = 230
54: [149] Display message, options 0x2 at 0,0 timeout 0
'M6 - wait for tool'
55: [135] Wait until extruder 0 ready (100 ms between polls, 65535 s timeout
56: [135] Wait until extruder 0 ready (100 ms between polls, 65535 s timeout
57: [135] Wait until extruder 0 ready (100 ms between polls, 65535 s timeout
58: [149] Display message, options 0x2 at 0,0 timeout 0
'M17 - steppers on'
59: [137] Enable/disable steppers 9F
60: [149] Display message, options 0x2 at 0,0 timeout 0
'M18 - steppers off'
61: [137] Enable/disable steppers 1F
62: [149] Display message, options 0x2 at 0,0 timeout 0
'T1 - tool change'
63: [149] Display message, options 0x0 at 0,0 timeout 0
'This is a really lar'
64: [149] Display message, options 0x1 at 0,0 timeout 0
'ge message that will'
65: [149] Display message, options 0x1 at 0,0 timeout 0
' take up quite a few'
66: [149] Display message, options 0x3 at 0,0 timeout 20
' rows to display on '
67: [149] Display message, options 0x2 at 0,0 timeout 0
'M71 - wait for input'
68: [149] Display message, options 0x6 at 0,0 timeout 0
'Press the M Button'
69: [149] Display message, options 0x2 at 0,0 timeout 0
'M72 - play song'
70: [151] Queue song 0
71: [151] Queue song 1
72: [149] Display message, options 0x2 at 0,0 timeout 0
'M73 - progress'
73: [150] Set build percent 10%, ignore 0
74: [149] Display message, options 0x2 at 0,0 timeout 0
'M101 - extruder on-f'
75: [137] Enable/disable steppers 88
76: [137] Enable/disable steppers 88
77: [149] Display message, options 0x2 at 0,0 timeout 0
'M102 - extruder on-r'
78: [137] Enable/disable steppers 88
79: [137] Enable/disable steppers 88
80: [149] Display message, options 0x2 at 0,0 timeout 0
'M103 - extruder off'
81: [137] Enable/disable steppers 8
82: [137] Enable/disable steppers 8
83: [149] Display message, options 0x2 at 0,0 timeout 0
'M104 - set temp'
84: [136] Extruder(0) [3] set target temperature = 240
85: [136] Extruder(0) [3] set target temperature = 230
86: [149] Display message, options 0x2 at 0,0 timeout 0
'M108 - set rpm'
87: [149] Display message, options 0x2 at 0,0 timeout 0
'M109 - hbp temp'
88: [136] Extruder(0) [3] set target temperature = 110
89: [135] Wait until extruder 0 ready (100 ms between polls, 65535 s timeout
90: [149] Display message, options 0x2 at 0,0 timeout 0
'M126 - blower on'
91: [136] Extruder(0) [13] toggle blower fan = 1
92: [149] Display message, options 0x2 at 0,0 timeout 0
'M127 - blower off'
93: [136] Extruder(0) [13] toggle blower fan = 0
94: [149] Display message, options 0x2 at 0,0 timeout 0
'M131 - store EEPROM'
95: [143] Store home position for axes 31
96: [149] Display message, options 0x2 at 0,0 timeout 0
'M132 - load EEPROM'
97: [144] Recall home position for axes 31
98: [149] Display message, options 0x2 at 0,0 timeout 0
'M140 - hbp temp'
99: [149] Display message, options 0x2 at 0,0 timeout 0
'M300 - set beep'
100: [147] Set beep, frequency 4000, length 100, effect 0
101: [149] Display message, options 0x2 at 0,0 timeout 0
'M320 - acc on'
102: [156] Set acceleration to 1
103: [149] Display message, options 0x2 at 0,0 timeout 0
'M21 - acc off'
104: [156] Set acceleration to 0
105: [149] Display message, options 0x2 at 0,0 timeout 0
'M322 - pause@z'
106: [158] Pause @ zPos 10.000000
107: [149] Display message, options 0x2 at 0,0 timeout 0
'M420 - set LED'
108: [146] Set RGB led red 255, green 0, blue 0, blink rate 0, effect 0
109: [149] Display message, options 0x2 at 0,0 timeout 0
'T1 - set tool'
110: [149] Display message, options 0x2 at 0,0 timeout 0
'T0 - set tool'
111: [149] Display message, options 0x2 at 0,0 timeout 0
'M73 - end build'
112: [150] Set build percent 100%, ignore 0
113: [154] End build, flags 0x0
114: [149] Display message, options 0x2 at 0,0 timeout 0
'after the end'
115: [137] Enable/disable steppers 1F
EOF
make[1]: Leaving directory '/«BUILDDIR»/gpx-0~20140109+git3570fc9'
fakeroot debian/rules binary-arch
dh binary-arch
dh_testroot -a
dh_prep -a
debian/rules override_dh_auto_install
make[1]: Entering directory '/«BUILDDIR»/gpx-0~20140109+git3570fc9'
dh_auto_install -- PREFIX=debian/gpx/usr
make[2]: Entering directory '/«BUILDDIR»/gpx-0~20140109+git3570fc9'
test -d debian/gpx/usr || mkdir debian/gpx/usr
test -d debian/gpx/usr/bin || mkdir debian/gpx/usr/bin
install -m 0755 gpx debian/gpx/usr/bin
make[2]: Leaving directory '/«BUILDDIR»/gpx-0~20140109+git3570fc9'
make[1]: Leaving directory '/«BUILDDIR»/gpx-0~20140109+git3570fc9'
dh_installdocs -a
dh_installchangelogs -a
debian/rules override_dh_installman
make[1]: Entering directory '/«BUILDDIR»/gpx-0~20140109+git3570fc9'
pod2man --center "User Commands" --release=gpx debian/gpx.pod > debian/gpx.1
dh_installman
make[1]: Leaving directory '/«BUILDDIR»/gpx-0~20140109+git3570fc9'
dh_perl -a
dh_link -a
dh_compress -a
dh_fixperms -a
dh_strip -a
dh_makeshlibs -a
dh_shlibdeps -a
dh_installdeb -a
dh_gencontrol -a
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
dh_md5sums -a
dh_builddeb -a
dpkg-deb: building package `gpx' in `../gpx_0~20140109+git3570fc9-2_armhf.deb'.
dpkg-genchanges -B -mRaspbian wandboard test autobuilder <root@raspbian.org> >../gpx_0~20140109+git3570fc9-2_armhf.changes
dpkg-genchanges: arch-specific upload - not including arch-independent packages
dpkg-genchanges: binary-only upload - not including any source code
dpkg-source --after-build gpx-0~20140109+git3570fc9
dpkg-buildpackage: binary-only upload (no source included)
────────────────────────────────────────────────────────────────────────────────
Build finished at 20140705-0754
Finished
────────
I: Built successfully
┌──────────────────────────────────────────────────────────────────────────────┐
│ Changes │
└──────────────────────────────────────────────────────────────────────────────┘
gpx_0~20140109+git3570fc9-2_armhf.changes:
──────────────────────────────────────────
Format: 1.8
Date: Mon, 30 Jun 2014 11:25:03 +0800
Source: gpx
Binary: gpx
Architecture: armhf
Version: 0~20140109+git3570fc9-2
Distribution: jessie-staging
Urgency: medium
Maintainer: Raspbian wandboard test autobuilder <root@raspbian.org>
Changed-By: Chow Loong Jin <hyperair@debian.org>
Description:
gpx - Gcode to x3g conversion post processor
Closes: 753081
Changes:
gpx (0~20140109+git3570fc9-2) unstable; urgency=medium
.
* [a874b39] Build-dep on python (Closes: #753081)
Checksums-Sha1:
9994594d0d96b3790420e7e840e33ccfce4dc289 29016 gpx_0~20140109+git3570fc9-2_armhf.deb
Checksums-Sha256:
b274b16945df4e8fa1ceed9881100402233083fd79fd12ed1b0c10c81ae50356 29016 gpx_0~20140109+git3570fc9-2_armhf.deb
Files:
7ccdd6d818253136b8bf7a43592b5ab9 29016 science optional gpx_0~20140109+git3570fc9-2_armhf.deb
┌──────────────────────────────────────────────────────────────────────────────┐
│ Package contents │
└──────────────────────────────────────────────────────────────────────────────┘
gpx_0~20140109+git3570fc9-2_armhf.deb
─────────────────────────────────────
new debian package, version 2.0.
size 29016 bytes: control archive=896 bytes.
745 bytes, 18 lines control
304 bytes, 5 lines md5sums
Package: gpx
Version: 0~20140109+git3570fc9-2
Architecture: armhf
Maintainer: Chow Loong Jin <hyperair@debian.org>
Installed-Size: 111
Depends: libc6 (>= 2.4)
Section: science
Priority: optional
Homepage: https://github.com/whpthomas/GPX
Description: Gcode to x3g conversion post processor
GPX is a post processing utility for converting gcode output from 3D slicing
software like Cura, KISSlicer, S3DCreator and Slic3r to x3g files for
standalone 3D printing on Makerbot Cupcake, ThingOMatic, and Replicator 1/2/2x
printers - with support for both stock and sailfish firmwares.
.
G-codes are plain-text files containing instructions for controlling CNC
milling machines and consumer-grade 3D printers adapted from CNC milling
machines.
drwxr-xr-x root/root 0 2014-07-05 07:54 ./
drwxr-xr-x root/root 0 2014-07-05 07:54 ./usr/
drwxr-xr-x root/root 0 2014-07-05 07:54 ./usr/bin/
-rwxr-xr-x root/root 106256 2014-07-05 07:54 ./usr/bin/gpx
drwxr-xr-x root/root 0 2014-07-05 07:54 ./usr/share/
drwxr-xr-x root/root 0 2014-07-05 07:54 ./usr/share/doc/
drwxr-xr-x root/root 0 2014-07-05 07:54 ./usr/share/doc/gpx/
-rw-r--r-- root/root 1973 2014-01-08 18:20 ./usr/share/doc/gpx/Readme.md
-rw-r--r-- root/root 1422 2014-06-30 03:25 ./usr/share/doc/gpx/copyright
-rw-r--r-- root/root 236 2014-06-30 03:25 ./usr/share/doc/gpx/changelog.Debian.gz
drwxr-xr-x root/root 0 2014-07-05 07:54 ./usr/share/man/
drwxr-xr-x root/root 0 2014-07-05 07:54 ./usr/share/man/man1/
-rw-r--r-- root/root 2927 2014-07-05 07:54 ./usr/share/man/man1/gpx.1.gz
┌──────────────────────────────────────────────────────────────────────────────┐
│ Post Build │
└──────────────────────────────────────────────────────────────────────────────┘
┌──────────────────────────────────────────────────────────────────────────────┐
│ Cleanup │
└──────────────────────────────────────────────────────────────────────────────┘
Purging /«BUILDDIR»
Not cleaning session: cloned chroot in use
┌──────────────────────────────────────────────────────────────────────────────┐
│ Summary │
└──────────────────────────────────────────────────────────────────────────────┘
Build Architecture: armhf
Build-Space: 916
Build-Time: 33
Distribution: jessie-staging
Host Architecture: armhf
Install-Time: 199
Job: gpx_0~20140109+git3570fc9-2
Machine Architecture: armhf
Package: gpx
Package-Time: 285
Source-Version: 0~20140109+git3570fc9-2
Space: 916
Status: successful
Version: 0~20140109+git3570fc9-2
────────────────────────────────────────────────────────────────────────────────
Finished at 20140705-0754
Build needed 00:04:45, 916k disc space