backuppc →
3.2.1-5.1+b3 →
armhf → 2013-08-08 11:21:59
sbuild (Debian sbuild) 0.63.2 (18 Aug 2012) on testbuildd.raspbian.org
╔══════════════════════════════════════════════════════════════════════════════╗
║ backuppc 3.2.1-5.1+b3 (armhf) 08 Aug 2013 11:15 ║
╚══════════════════════════════════════════════════════════════════════════════╝
Package: backuppc
Version: 3.2.1-5.1+b3
Source Version: 3.2.1-5.1
Distribution: jessie-staging
Machine Architecture: armhf
Host Architecture: armhf
Build Architecture: armhf
I: NOTICE: Log filtering will replace 'build/backuppc-l2ePtB/backuppc-3.2.1' with '«PKGBUILDDIR»'
I: NOTICE: Log filtering will replace 'build/backuppc-l2ePtB' with '«BUILDDIR»'
I: NOTICE: Log filtering will replace 'var/lib/schroot/mount/jessie-staging-armhf-sbuild-41558e53-4eb4-4a46-b60b-8859fd87157d' with '«CHROOT»'
┌──────────────────────────────────────────────────────────────────────────────┐
│ Update chroot │
└──────────────────────────────────────────────────────────────────────────────┘
Get:1 http://172.17.0.1 jessie-staging Release.gpg [490 B]
Get:2 http://172.17.0.1 jessie-staging Release [10.8 kB]
Get:3 http://172.17.0.1 jessie-staging/main Sources [6692 kB]
Get:4 http://172.17.0.1 jessie-staging/main armhf Packages [7864 kB]
Ign http://172.17.0.1 jessie-staging/main Translation-en
Fetched 14.6 MB in 1min 1s (237 kB/s)
Reading package lists...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Fetch source files │
└──────────────────────────────────────────────────────────────────────────────┘
Check APT
─────────
Checking available source versions...
Download source files with APT
──────────────────────────────
Reading package lists...
Building dependency tree...
Reading state information...
Need to get 543 kB of source archives.
Get:1 http://172.17.0.1/private/ jessie-staging/main backuppc 3.2.1-5.1 (dsc) [1675 B]
Get:2 http://172.17.0.1/private/ jessie-staging/main backuppc 3.2.1-5.1 (tar) [512 kB]
Get:3 http://172.17.0.1/private/ jessie-staging/main backuppc 3.2.1-5.1 (diff) [29.8 kB]
Fetched 543 kB in 9s (55.9 kB/s)
Download complete and in download only mode
Check arch
──────────
Merged Build-Depends: build-essential, fakeroot
Filtered Build-Depends: build-essential, fakeroot
dpkg-deb: building package `sbuild-build-depends-core-dummy' in `/«BUILDDIR»/resolver-o68anp/apt_archive/sbuild-build-depends-core-dummy.deb'.
OK
Reading package lists...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Install core build dependencies (apt-based resolver) │
└──────────────────────────────────────────────────────────────────────────────┘
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
sbuild-build-depends-core-dummy
debconf: delaying package configuration, since apt-utils is not installed
0 upgraded, 1 newly installed, 0 to remove and 47 not upgraded.
Need to get 0 B/704 B of archives.
After this operation, 0 B of additional disk space will be used.
Selecting previously unselected package sbuild-build-depends-core-dummy.
(Reading database ... 11338 files and directories currently installed.)
Unpacking sbuild-build-depends-core-dummy (from .../sbuild-build-depends-core-dummy.deb) ...
Setting up sbuild-build-depends-core-dummy (0.invalid.0) ...
Merged Build-Depends: base-files, base-passwd, bash, bsdutils, coreutils, dash, debianutils, diffutils, dpkg, e2fsprogs, findutils, grep, gzip, hostname, libc-bin, login, mount, ncurses-base, ncurses-bin, perl-base, sed, sysvinit, sysvinit-utils, tar, util-linux, libc6-dev | libc-dev, gcc (>= 4:4.4.3), g++ (>= 4:4.4.3), make, dpkg-dev (>= 1.13.5), debhelper (>= 5), par2, perl (>= 5.6.0), patch
Filtered Build-Depends: base-files, base-passwd, bash, bsdutils, coreutils, dash, debianutils, diffutils, dpkg, e2fsprogs, findutils, grep, gzip, hostname, libc-bin, login, mount, ncurses-base, ncurses-bin, perl-base, sed, sysvinit, sysvinit-utils, tar, util-linux, libc6-dev, gcc (>= 4:4.4.3), g++ (>= 4:4.4.3), make, dpkg-dev (>= 1.13.5), debhelper (>= 5), par2, perl (>= 5.6.0), patch
dpkg-deb: building package `sbuild-build-depends-backuppc-dummy' in `/«BUILDDIR»/resolver-KZM_mP/apt_archive/sbuild-build-depends-backuppc-dummy.deb'.
OK
Reading package lists...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Install backuppc build dependencies (apt-based resolver) │
└──────────────────────────────────────────────────────────────────────────────┘
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
bsdmainutils debhelper file gettext gettext-base groff-base intltool-debian
libasprintf0c2 libcroco3 libffi6 libglib2.0-0 libmagic1 libpipeline1
libunistring0 libxml2 man-db par2 po-debconf
Suggested packages:
wamerican wordlist whois vacation dh-make gettext-doc groff less www-browser
libmail-box-perl
Recommended packages:
curl wget lynx-cur autopoint libasprintf-dev libgettextpo-dev
libglib2.0-data shared-mime-info xml-core libmail-sendmail-perl
The following NEW packages will be installed:
bsdmainutils debhelper file gettext gettext-base groff-base intltool-debian
libasprintf0c2 libcroco3 libffi6 libglib2.0-0 libmagic1 libpipeline1
libunistring0 libxml2 man-db par2 po-debconf
sbuild-build-depends-backuppc-dummy
0 upgraded, 19 newly installed, 0 to remove and 47 not upgraded.
Need to get 8478 kB/8479 kB of archives.
After this operation, 22.5 MB of additional disk space will be used.
Get:1 http://172.17.0.1/private/ jessie-staging/main libpipeline1 armhf 1.2.4-1 [36.9 kB]
Get:2 http://172.17.0.1/private/ jessie-staging/main groff-base armhf 1.22.2-3 [666 kB]
Get:3 http://172.17.0.1/private/ jessie-staging/main bsdmainutils armhf 9.0.5 [206 kB]
Get:4 http://172.17.0.1/private/ jessie-staging/main man-db armhf 2.6.5-2 [949 kB]
Get:5 http://172.17.0.1/private/ jessie-staging/main libasprintf0c2 armhf 0.18.3-1 [29.4 kB]
Get:6 http://172.17.0.1/private/ jessie-staging/main libmagic1 armhf 1:5.14-2 [213 kB]
Get:7 http://172.17.0.1/private/ jessie-staging/main libxml2 armhf 2.9.1+dfsg1-2 [836 kB]
Get:8 http://172.17.0.1/private/ jessie-staging/main libffi6 armhf 3.0.13-4 [19.8 kB]
Get:9 http://172.17.0.1/private/ jessie-staging/main libglib2.0-0 armhf 2.36.3-3 [1905 kB]
Get:10 http://172.17.0.1/private/ jessie-staging/main libcroco3 armhf 0.6.8-2 [119 kB]
Get:11 http://172.17.0.1/private/ jessie-staging/main libunistring0 armhf 0.9.3-5 [408 kB]
Get:12 http://172.17.0.1/private/ jessie-staging/main file armhf 1:5.14-2 [53.8 kB]
Get:13 http://172.17.0.1/private/ jessie-staging/main gettext-base armhf 0.18.3-1 [136 kB]
Get:14 http://172.17.0.1/private/ jessie-staging/main gettext armhf 0.18.3-1 [1837 kB]
Get:15 http://172.17.0.1/private/ jessie-staging/main intltool-debian all 0.35.0+20060710.1 [29.8 kB]
Get:16 http://172.17.0.1/private/ jessie-staging/main po-debconf all 1.0.16+nmu2 [223 kB]
Get:17 http://172.17.0.1/private/ jessie-staging/main debhelper all 9.20130630 [710 kB]
Get:18 http://172.17.0.1/private/ jessie-staging/main par2 armhf 0.4-11 [99.0 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 8478 kB in 44s (192 kB/s)
Selecting previously unselected package libpipeline1:armhf.
(Reading database ... 11338 files and directories currently installed.)
Unpacking libpipeline1:armhf (from .../libpipeline1_1.2.4-1_armhf.deb) ...
Selecting previously unselected package groff-base.
Unpacking groff-base (from .../groff-base_1.22.2-3_armhf.deb) ...
Selecting previously unselected package bsdmainutils.
Unpacking bsdmainutils (from .../bsdmainutils_9.0.5_armhf.deb) ...
Selecting previously unselected package man-db.
Unpacking man-db (from .../man-db_2.6.5-2_armhf.deb) ...
Selecting previously unselected package libasprintf0c2:armhf.
Unpacking libasprintf0c2:armhf (from .../libasprintf0c2_0.18.3-1_armhf.deb) ...
Selecting previously unselected package libmagic1:armhf.
Unpacking libmagic1:armhf (from .../libmagic1_1%3a5.14-2_armhf.deb) ...
Selecting previously unselected package libxml2:armhf.
Unpacking libxml2:armhf (from .../libxml2_2.9.1+dfsg1-2_armhf.deb) ...
Selecting previously unselected package libffi6:armhf.
Unpacking libffi6:armhf (from .../libffi6_3.0.13-4_armhf.deb) ...
Selecting previously unselected package libglib2.0-0:armhf.
Unpacking libglib2.0-0:armhf (from .../libglib2.0-0_2.36.3-3_armhf.deb) ...
Selecting previously unselected package libcroco3:armhf.
Unpacking libcroco3:armhf (from .../libcroco3_0.6.8-2_armhf.deb) ...
Selecting previously unselected package libunistring0:armhf.
Unpacking libunistring0:armhf (from .../libunistring0_0.9.3-5_armhf.deb) ...
Selecting previously unselected package file.
Unpacking file (from .../file_1%3a5.14-2_armhf.deb) ...
Selecting previously unselected package gettext-base.
Unpacking gettext-base (from .../gettext-base_0.18.3-1_armhf.deb) ...
Selecting previously unselected package gettext.
Unpacking gettext (from .../gettext_0.18.3-1_armhf.deb) ...
Selecting previously unselected package intltool-debian.
Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ...
Selecting previously unselected package po-debconf.
Unpacking po-debconf (from .../po-debconf_1.0.16+nmu2_all.deb) ...
Selecting previously unselected package debhelper.
Unpacking debhelper (from .../debhelper_9.20130630_all.deb) ...
Selecting previously unselected package par2.
Unpacking par2 (from .../archives/par2_0.4-11_armhf.deb) ...
Selecting previously unselected package sbuild-build-depends-backuppc-dummy.
Unpacking sbuild-build-depends-backuppc-dummy (from .../sbuild-build-depends-backuppc-dummy.deb) ...
Setting up libpipeline1:armhf (1.2.4-1) ...
Setting up groff-base (1.22.2-3) ...
Setting up bsdmainutils (9.0.5) ...
update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode
update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode
Setting up man-db (2.6.5-2) ...
Not building database; man-db/auto-update is not 'true'.
Setting up libasprintf0c2:armhf (0.18.3-1) ...
Setting up libmagic1:armhf (1:5.14-2) ...
Setting up libxml2:armhf (2.9.1+dfsg1-2) ...
Setting up libffi6:armhf (3.0.13-4) ...
Setting up libglib2.0-0:armhf (2.36.3-3) ...
No schema files found: doing nothing.
Setting up libcroco3:armhf (0.6.8-2) ...
Setting up libunistring0:armhf (0.9.3-5) ...
Setting up file (1:5.14-2) ...
Setting up gettext-base (0.18.3-1) ...
Setting up gettext (0.18.3-1) ...
Setting up intltool-debian (0.35.0+20060710.1) ...
Setting up po-debconf (1.0.16+nmu2) ...
Setting up debhelper (9.20130630) ...
Setting up par2 (0.4-11) ...
Setting up sbuild-build-depends-backuppc-dummy (0.invalid.0) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
┌──────────────────────────────────────────────────────────────────────────────┐
│ Build environment │
└──────────────────────────────────────────────────────────────────────────────┘
Kernel: Linux 3.9.8-imx5 armhf (armv7l)
Toolchain package versions: binutils_2.22-8 dpkg-dev_1.16.10 g++-4.6_4.6.4-2+rpi1 gcc-4.6_4.6.4-2+rpi1 libc6-dev_2.17-3 libstdc++6_4.8.0-7+rpi1 libstdc++6-4.6-dev_4.6.4-2+rpi1 linux-libc-dev_3.2.41-2+rpi1
Package versions: apt_0.9.7.8+rpi1 base-files_7.2 base-passwd_3.5.26 bash_4.2+dfsg-1 binutils_2.22-8 bsdmainutils_9.0.5 bsdutils_1:2.20.1-5.4 build-essential_11.6 bzip2_1.0.6-4 coreutils_8.13-3.5 cpio_2.11+dfsg-1 cpp_4:4.6.3-8 cpp-4.6_4.6.4-2+rpi1 dash_0.5.7-3 debconf_1.5.50 debconf-i18n_1.5.50 debfoster_2.7-1.2 debhelper_9.20130630 debianutils_4.3.4 diffutils_1:3.2-8 dpkg_1.16.10 dpkg-dev_1.16.10 e2fslibs_1.42.5-1.1 e2fsprogs_1.42.5-1.1 fakeroot_1.18.4-2 file_1:5.14-2 findutils_4.4.2-5 g++_4:4.6.3-8 g++-4.6_4.6.4-2+rpi1 gcc_4:4.6.3-8 gcc-4.5-base_4.5.3-12+rpi1 gcc-4.6_4.6.4-2+rpi1 gcc-4.6-base_4.6.4-2+rpi1 gcc-4.7-base_4.7.3-4+rpi1 gcc-4.8-base_4.8.0-7+rpi1 gettext_0.18.3-1 gettext-base_0.18.3-1 gnupg_1.4.12-7 gpgv_1.4.12-7 grep_2.14-2 groff-base_1.22.2-3 gzip_1.5-1.1 hostname_3.12 initramfs-tools_0.112 initscripts_2.88dsf-41 insserv_1.14.0-5 intltool-debian_0.35.0+20060710.1 klibc-utils_2.0.1-3.1+rpi1 kmod_9-3 libacl1_2.2.52-1 libapt-pkg4.12_0.9.7.8+rpi1 libasprintf0c2_0.18.3-1 libattr1_1:2.4.47-1 libblkid1_2.20.1-5.4 libbz2-1.0_1.0.6-4 libc-bin_2.17-3 libc-dev-bin_2.17-3 libc6_2.17-3 libc6-dev_2.17-3 libcap2_1:2.22-1.2 libclass-isa-perl_0.36-5 libcomerr2_1.42.5-1.1 libcroco3_0.6.8-2 libdb5.1_5.1.29-5 libdbus-1-3_1.6.10-1 libdpkg-perl_1.16.10 libffi6_3.0.13-4 libgc1c2_1:7.1-9.1 libgcc1_1:4.8.0-7+rpi1 libgdbm3_1.8.3-12 libglib2.0-0_2.36.3-3 libgmp10_2:5.1.2+dfsg-1 libgomp1_4.8.0-7+rpi1 libklibc_2.0.1-3.1+rpi1 libkmod2_9-3 liblocale-gettext-perl_1.05-7 liblzma5_5.1.1alpha+20120614-2 libmagic1_1:5.14-2 libmount1_2.20.1-5.4 libmpc2_0.9-4 libmpc3_1.0.1-1 libmpfr4_3.1.1-1 libncurses5_5.9+20130504-1 libncursesw5_5.9+20130504-1 libpam-modules_1.1.3-9 libpam-modules-bin_1.1.3-9 libpam-runtime_1.1.3-9 libpam0g_1.1.3-9 libpcre3_1:8.31-2 libpipeline1_1.2.4-1 libprocps0_1:3.3.4-2 libreadline6_6.2+dfsg-0.1 libselinux1_2.1.13-2 libsemanage-common_2.1.10-2 libsemanage1_2.1.10-2 libsepol1_2.1.9-2 libslang2_2.2.4-15 libss2_1.42.5-1.1 libstdc++6_4.8.0-7+rpi1 libstdc++6-4.6-dev_4.6.4-2+rpi1 libswitch-perl_2.16-2 libtext-charwidth-perl_0.04-7 libtext-iconv-perl_1.7-5 libtext-wrapi18n-perl_0.06-7 libtimedate-perl_1.2000-1 libtinfo5_5.9+20130504-1 libudev0_175-7.2 libunistring0_0.9.3-5 libusb-0.1-4_2:0.1.12-23.2 libustr-1.0-1_1.0.4-3 libuuid1_2.20.1-5.4 libxml2_2.9.1+dfsg1-2 linux-libc-dev_3.2.41-2+rpi1 login_1:4.1.5.1-1 lsb-base_4.1+Debian8+rpi1 make_3.81-8.2 makedev_2.3.1-93 man-db_2.6.5-2 mawk_1.3.3-17 mount_2.20.1-5.4 multiarch-support_2.17-3 ncurses-base_5.9+20130504-1 ncurses-bin_5.9+20130504-1 par2_0.4-11 passwd_1:4.1.5.1-1 patch_2.6.1-3 perl_5.14.2-21+rpi1 perl-base_5.14.2-21+rpi1 perl-modules_5.14.2-21+rpi1 plymouth_0.8.8-6 po-debconf_1.0.16+nmu2 procps_1:3.3.4-2 raspbian-archive-keyring_20120528.2 readline-common_6.2+dfsg-0.1 sbuild-build-depends-backuppc-dummy_0.invalid.0 sbuild-build-depends-core-dummy_0.invalid.0 sed_4.2.2-1 sensible-utils_0.0.7 sysv-rc_2.88dsf-41 sysvinit_2.88dsf-41 sysvinit-utils_2.88dsf-41 tar_1.26+dfsg-6 tzdata_2013c-2 udev_175-7.2 util-linux_2.20.1-5.4 xz-utils_5.1.1alpha+20120614-2 zlib1g_1:1.2.8.dfsg-1
┌──────────────────────────────────────────────────────────────────────────────┐
│ Build │
└──────────────────────────────────────────────────────────────────────────────┘
Unpack source
─────────────
gpgv: keyblock resource `/sbuild-nonexistent/.gnupg/trustedkeys.gpg': file open error
gpgv: Signature made Fri Jun 7 10:56:09 2013 UTC using RSA key ID C8A6BF61
gpgv: Can't check signature: public key not found
dpkg-source: warning: failed to verify signature on ./backuppc_3.2.1-5.1.dsc
dpkg-source: info: extracting backuppc in backuppc-3.2.1
dpkg-source: info: unpacking backuppc_3.2.1.orig.tar.gz
dpkg-source: info: applying backuppc_3.2.1-5.1.diff.gz
dpkg-source: info: upstream files that have been modified:
backuppc-3.2.1/bin/BackupPC
backuppc-3.2.1/conf/hosts
backuppc-3.2.1/configure.pl
backuppc-3.2.1/doc/BackupPC.html
backuppc-3.2.1/doc/BackupPC.pod
backuppc-3.2.1/httpd/BackupPC.conf
backuppc-3.2.1/lib/BackupPC/CGI/EditConfig.pm
backuppc-3.2.1/lib/BackupPC/CGI/GeneralInfo.pm
backuppc-3.2.1/lib/BackupPC/CGI/Lib.pm
backuppc-3.2.1/lib/BackupPC/CGI/RestoreFile.pm
backuppc-3.2.1/lib/BackupPC/CGI/View.pm
backuppc-3.2.1/lib/BackupPC/Lib.pm
backuppc-3.2.1/lib/BackupPC/Storage/Text.pm
Check disc space
────────────────
Sufficient free space for build
Hack binNMU version
───────────────────
Created changelog entry for binNMU version 3.2.1-5.1+b3
User Environment
────────────────
APT_CONFIG=/var/lib/sbuild/apt.conf
DEB_BUILD_OPTIONS=parallel=4
HOME=/sbuild-nonexistent
LANG=en_US.UTF-8
LC_ALL=POSIX
LOGNAME=root
LS_OPTIONS=--color=auto
MAIL=/var/mail/root
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
PWD=/root
SCHROOT_ALIAS_NAME=jessie-staging-armhf-sbuild
SCHROOT_CHROOT_NAME=jessie-staging-armhf-sbuild
SCHROOT_COMMAND=env
SCHROOT_GID=111
SCHROOT_GROUP=buildd
SCHROOT_SESSION_ID=jessie-staging-armhf-sbuild-41558e53-4eb4-4a46-b60b-8859fd87157d
SCHROOT_UID=106
SCHROOT_USER=buildd
SHELL=/bin/sh
SHLVL=1
SSH_CLIENT=192.168.1.2 38704 22
SSH_CONNECTION=192.168.1.2 38704 192.168.1.45 22
SSH_TTY=/dev/pts/0
TERM=xterm
USER=root
XDG_SESSION_COOKIE=106ef489ba27ee071ab233f6518d3bce-1375903963.174676-1948290074
_=/etc/init.d/buildd
dpkg-buildpackage
─────────────────
dpkg-buildpackage: source package backuppc
dpkg-buildpackage: source version 3.2.1-5.1+b3
dpkg-source --before-build backuppc-3.2.1
dpkg-buildpackage: host architecture armhf
fakeroot debian/rules clean
dh_testdir
dh_testroot
rm -f build-stamp configure-stamp index.cgi
# Add here commands to clean up after the build process.
rm -f init.d/*-backuppc*
rm -f backuppc.8*
dh_clean
dpkg-buildpackage: warning: debian/rules must be updated to support the 'build-arch' and 'build-indep' targets (at least 'build-arch' seems to be missing)
debian/rules build
dh_testdir
# Add here commands to configure the package.
touch configure-stamp
dh_testdir
# Add here commands to compile the package.
#/usr/bin/make
#/usr/bin/docbook-to-man debian/backuppc.sgml > backuppc.1
cc debian/setuidwrapper.c -o index.cgi
touch build-stamp
fakeroot debian/rules binary-arch
dh_testdir
dh_testroot
dh_clean -k
dh_clean: dh_clean -k is deprecated; use dh_prep instead
dh_installdirs
# Add here commands to install the package into debian/backuppc.
./configure.pl --batch --no-fhs --hostname XXXXXX --uid-ignore \
--install-dir /usr/share/backuppc --dest-dir /«PKGBUILDDIR»/debian/backuppc/ \
--data-dir /var/lib/backuppc --cgi-dir /usr/share/backuppc/cgi-bin \
--html-dir /usr/share/backuppc/image --html-dir-url /backuppc/image \
--bin-path perl=/usr/bin/perl --bin-path tar=/bin/tar \
--bin-path smbclient=/usr/bin/smbclient --bin-path nmblookup=/usr/bin/nmblookup \
--bin-path rsync=/usr/bin/rsync --bin-path ping=/bin/ping \
--bin-path df=/bin/df --bin-path ssh=/usr/bin/ssh \
--bin-path sendmail=/usr/sbin/sendmail --bin-path hostname=/bin/hostname \
--bin-path par2=/usr/bin/par2 --bin-path gzip=/bin/gzip --bin-path bzip2=/bin/bzip2
Is this a new installation or upgrade for BackupPC? If this is
an upgrade please tell me the full path of the existing BackupPC
configuration file (eg: /etc/BackupPC/config.pl). Otherwise, just
hit return.
--> Full path to existing main config.pl []
I found the following locations for these programs:
bzip2 => /bin/bzip2
cat => /bin/cat
df => /bin/df
gtar/tar => /bin/tar
gzip => /bin/gzip
hostname => /bin/hostname
nmblookup => /usr/bin/nmblookup
par2 => /usr/bin/par2
perl => /usr/bin/perl
ping => /bin/ping
rsync => /usr/bin/rsync
sendmail => /usr/sbin/sendmail
smbclient => /usr/bin/smbclient
split => /usr/bin/split
ssh/ssh2 => /usr/bin/ssh
--> Are these paths correct? [y]
Please tell me the hostname of the machine that BackupPC will run on.
--> BackupPC will run on host [XXXXXX]
BackupPC should run as a dedicated user with limited privileges. You
need to create a user. This user will need read/write permission on
the main data directory and read/execute permission on the install
directory (these directories will be setup shortly).
The primary group for this user should also be chosen carefully.
The data directories and files will have group read permission,
so group members can access backup files.
--> BackupPC should run as user [backuppc]
Please specify an install directory for BackupPC. This is where the
BackupPC scripts, library and documentation will be installed.
--> Install directory (full path) [/usr/share/backuppc]
Please specify a data directory for BackupPC. This is where all the
PC backup data is stored. This file system needs to be big enough to
accommodate all the PCs you expect to backup (eg: at least several GB
per machine).
--> Data directory (full path) [/var/lib/backuppc]
BackupPC can compress pool files, providing around a 40% reduction in pool
size (your mileage may vary). Specify the compression level (0 turns
off compression, and 1 to 9 represent good/fastest to best/slowest).
The recommended values are 0 (off) or 3 (reasonable compression and speed).
Increasing the compression level to 5 will use around 20% more cpu time
and give perhaps 2-3% more compression.
--> Compression level [3]
BackupPC has a powerful CGI perl interface that runs under Apache.
A single executable needs to be installed in a cgi-bin directory.
This executable needs to run as set-uid backuppc, or
it can be run under mod_perl with Apache running as user backuppc.
Leave this path empty if you don't want to install the CGI interface.
--> CGI bin directory (full path) [/usr/share/backuppc/cgi-bin]
BackupPC's CGI script needs to display various PNG/GIF images that
should be stored where Apache can serve them. They should be placed
somewhere under Apache's DocumentRoot. BackupPC also needs to know
the URL to access these images. Example:
Apache image directory: /var/www/htdocs/BackupPC
URL for image directory: /BackupPC
The URL for the image directory should start with a slash.
--> Apache image directory (full path) [/usr/share/backuppc/image]
--> URL for image directory (omit http://host; starts with '/') [/backuppc/image]
Ok, we're about to:
- install the binaries, lib and docs in /usr/share/backuppc,
- create the data directory /var/lib/backuppc,
- create/update the config.pl file /etc/backuppc/config.pl,
- optionally install the cgi-bin interface.
--> Do you want to continue? [y]
Created /«PKGBUILDDIR»/debian/backuppc//usr/share/backuppc/bin
Created /«PKGBUILDDIR»/debian/backuppc//usr/share/backuppc/doc
Created /«PKGBUILDDIR»/debian/backuppc//usr/share/backuppc/lib/BackupPC/CGI
Created /«PKGBUILDDIR»/debian/backuppc//usr/share/backuppc/lib/BackupPC/Config
Created /«PKGBUILDDIR»/debian/backuppc//usr/share/backuppc/lib/BackupPC/Lang
Created /«PKGBUILDDIR»/debian/backuppc//usr/share/backuppc/lib/BackupPC/Storage
Created /«PKGBUILDDIR»/debian/backuppc//usr/share/backuppc/lib/BackupPC/Xfer
Created /«PKGBUILDDIR»/debian/backuppc//usr/share/backuppc/lib/BackupPC/Zip
Created /«PKGBUILDDIR»/debian/backuppc//usr/share/backuppc/lib/Net/FTP
Created /«PKGBUILDDIR»/debian/backuppc//var/lib/backuppc
Created /«PKGBUILDDIR»/debian/backuppc//var/lib/backuppc/pool
Created /«PKGBUILDDIR»/debian/backuppc//var/lib/backuppc/cpool
Created /«PKGBUILDDIR»/debian/backuppc//var/lib/backuppc/pc
Created /«PKGBUILDDIR»/debian/backuppc//var/lib/backuppc/trash
Created /«PKGBUILDDIR»/debian/backuppc//etc/backuppc
Created /«PKGBUILDDIR»/debian/backuppc//var/lib/backuppc/log
Installing binaries in /«PKGBUILDDIR»/debian/backuppc//usr/share/backuppc/bin
Installing library in /«PKGBUILDDIR»/debian/backuppc//usr/share/backuppc/lib
Installing images in /«PKGBUILDDIR»/debian/backuppc//usr/share/backuppc/image
Making init.d scripts
Making Apache configuration file for suid-perl
Installing docs in /«PKGBUILDDIR»/debian/backuppc//usr/share/backuppc/doc
Installing config.pl and hosts in /«PKGBUILDDIR»/debian/backuppc//etc/backuppc
Installing cgi script BackupPC_Admin in /«PKGBUILDDIR»/debian/backuppc//usr/share/backuppc/cgi-bin
Ok, it looks like we are finished. There are several more things you
will need to do:
- Browse through the config file, /etc/backuppc/config.pl,
and make sure all the settings are correct. In particular,
you will need to set $Conf{CgiAdminUsers} so you have
administration privileges in the CGI interface.
- Edit the list of hosts to backup in /etc/backuppc/hosts.
- Read the documentation in /usr/share/backuppc/doc/BackupPC.html.
Please pay special attention to the security section.
- Verify that the CGI script BackupPC_Admin runs correctly. You might
need to change the permissions or group ownership of BackupPC_Admin.
If this is an upgrade and you are using mod_perl, you will need
to restart Apache. Otherwise it will have stale code.
- BackupPC should be ready to start. Don't forget to run it
as user backuppc! The installation also contains an
init.d/backuppc script that can be copied to /etc/init.d
so that BackupPC can auto-start on boot. This will also enable
administrative users to start the server from the CGI interface.
See init.d/README.
Enjoy!
pod2man --section=8 --center="BackupPC manual" doc/BackupPC.pod backuppc.8
perl -e "s/.IX Title.*/.SH NAME\nbackuppc \\- BackupPC manual/g" -p -i.tmp backuppc.8
mv -f debian/backuppc/usr/share/backuppc/cgi-bin/* debian/backuppc/usr/share/backuppc/lib/realindex.cgi
install --mode=755 index.cgi debian/backuppc/usr/lib/backuppc/cgi-bin
install --mode=644 conf/hosts debian/backuppc/etc/backuppc
install --mode=644 debian/localhost.pl debian/backuppc/etc/backuppc
install --mode=644 debian/apache.conf debian/backuppc/etc/backuppc
rmdir debian/backuppc/var/lib/backuppc/conf/
rmdir: failed to remove `debian/backuppc/var/lib/backuppc/conf/': No such file or directory
make: [install] Error 1 (ignored)
(cd debian/backuppc/usr/share/backuppc/cgi-bin; ln -s ../image; ln -s /usr/lib/backuppc/cgi-bin/index.cgi )
patch --no-backup-if-mismatch -p0 < debian/config.pl.diff
patching file debian/backuppc/etc/backuppc/config.pl
Hunk #2 succeeded at 227 (offset 6 lines).
Hunk #3 succeeded at 979 (offset 24 lines).
Hunk #4 succeeded at 993 (offset 24 lines).
Hunk #5 succeeded at 1011 with fuzz 1 (offset 24 lines).
Hunk #6 succeeded at 1562 (offset 97 lines).
Hunk #7 succeeded at 2018 (offset 96 lines).
Hunk #8 succeeded at 2024 (offset 96 lines).
install --mode=644 debian/backuppc/etc/backuppc/config.pl debian/backuppc/usr/share/backuppc/conf
rm -rf debian/backuppc/etc/backuppc/config.pl
dh_testdir
dh_testroot
dh_installdocs
dh_installexamples debian/examples/*
mv -f debian/backuppc/usr/share/backuppc/doc/* debian/backuppc/usr/share/doc/backuppc/
dh_installmenu
dh_installinit
dh_installcron
dh_installman backuppc.8
dh_installinfo
dh_installchangelogs ChangeLog
dh_link
dh_strip
dh_compress
dh_fixperms
dh_installdebconf
dh_installdeb
dh_perl /«PKGBUILDDIR»/debian/backuppc/usr/share/backuppc/lib/
dh_shlibdeps
dh_gencontrol
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
dh_md5sums
dh_builddeb
dpkg-deb: building package `backuppc' in `../backuppc_3.2.1-5.1+b3_armhf.deb'.
dpkg-genchanges -B -mRaspbian nitrogen6x test autobuilder <root@raspbian.org> >../backuppc_3.2.1-5.1+b3_armhf.changes
dpkg-genchanges: arch-specific upload - not including arch-independent packages
dpkg-genchanges: binary-only upload - not including any source code
dpkg-source --after-build backuppc-3.2.1
dpkg-buildpackage: binary only upload (no source included)
────────────────────────────────────────────────────────────────────────────────
Build finished at 20130808-1120
Finished
────────
I: Built successfully
┌──────────────────────────────────────────────────────────────────────────────┐
│ Changes │
└──────────────────────────────────────────────────────────────────────────────┘
backuppc_3.2.1-5.1+b3_armhf.changes:
────────────────────────────────────
Format: 1.8
Date: Fri, 07 Jun 2013 11:42:08 +0100
Source: backuppc (3.2.1-5.1)
Binary: backuppc
Architecture: armhf
Version: 3.2.1-5.1+b3
Distribution: jessie-staging
Urgency: low
Maintainer: Raspbian nitrogen6x test autobuilder <root@raspbian.org>
Changed-By: Raspbian nitrogen6x test autobuilder <root@raspbian.org>
Description:
backuppc - high-performance, enterprise-grade system for backing up PCs
Changes:
backuppc (3.2.1-5.1+b3) jessie-staging; urgency=low
.
* Binary-only non-maintainer upload for armhf; no source changes.
* rebuild due to debcheck failure
Checksums-Sha1:
88a09f7d0c86c0114b180a8938c699083315a89d 578312 backuppc_3.2.1-5.1+b3_armhf.deb
Checksums-Sha256:
dca29564456749a70ef0a2f2d8b1c53d3b85fc347b391a5937eb9fa0d98ece4e 578312 backuppc_3.2.1-5.1+b3_armhf.deb
Files:
853820c972e21c14f6253cf6fc6650c6 578312 utils optional backuppc_3.2.1-5.1+b3_armhf.deb
┌──────────────────────────────────────────────────────────────────────────────┐
│ Package contents │
└──────────────────────────────────────────────────────────────────────────────┘
backuppc_3.2.1-5.1+b3_armhf.deb
───────────────────────────────
new debian package, version 2.0.
size 578312 bytes: control archive=13933 bytes.
116 bytes, 5 lines conffiles
659 bytes, 28 lines * config #!/bin/sh
2234 bytes, 35 lines control
10271 bytes, 136 lines md5sums
6065 bytes, 183 lines * postinst #!/bin/bash
3205 bytes, 115 lines * postrm #!/bin/sh
171 bytes, 7 lines * prerm #!/bin/sh
14450 bytes, 183 lines templates
Package: backuppc
Source: backuppc (3.2.1-5.1)
Version: 3.2.1-5.1+b3
Architecture: armhf
Maintainer: Ludovic Drolez <ldrolez@debian.org>
Installed-Size: 1856
Depends: libc6 (>= 2.4), perl, libdigest-md5-perl, libcompress-zlib-perl, libarchive-zip-perl, tar (>> 1.13), adduser (>= 3.9), dpkg (>= 1.8.3), apache2 | httpd, debconf (>= 0.5) | debconf-2.0, smbclient, samba-common-bin, bzip2, default-mta | exim4 | mail-transport-agent, iputils-ping | inetutils-ping, ucf, libtime-modules-perl, libwww-perl
Recommends: rsync, libfile-rsyncp-perl (>= 0.68), openssh-client | ssh-client, rrdtool, libio-dirent-perl
Suggests: w3m | www-browser, par2
Conflicts: libfile-rsyncp-perl (<< 0.68)
Section: utils
Priority: optional
Description: high-performance, enterprise-grade system for backing up PCs
BackupPC is disk based and not tape based. This particularity allows
features not found in any other backup solution:
* Clever pooling scheme minimizes disk storage and disk I/O.
Identical files across multiple backups of the same or different PC are
stored only once resulting in substantial savings in disk storage and disk
writes. Also known as "data deduplication".
* Optional compression provides additional reductions in storage.
CPU impact of compression is low since only new files (those not already
in the pool) need to be compressed.
* A powerful http/cgi user interface allows administrators to view log files,
configuration, current status and allows users to initiate and cancel
backups and browse and restore files from backups very quickly.
* No client-side software is needed. On WinXX the smb protocol is used.
On Linux or Unix clients, rsync or tar (over ssh/rsh/nfs) can be used
* Flexible restore options. Single files can be downloaded from any backup
directly from the CGI interface. Zip or Tar archives for selected files
or directories can also be downloaded from the CGI interface.
* BackupPC supports mobile environments where laptops are only intermittently
connected to the network and have dynamic IP addresses (DHCP).
* Flexible configuration parameters allow multiple backups to be performed
in parallel.
* and more to discover in the manual...
drwxr-xr-x root/root 0 2013-08-08 11:20 ./
drwxr-xr-x root/root 0 2013-08-08 11:20 ./etc/
drwxr-xr-x root/root 0 2013-08-08 11:20 ./etc/init.d/
-rwxr-xr-x root/root 2546 2013-08-08 11:19 ./etc/init.d/backuppc
drwxr-xr-x root/root 0 2013-08-08 11:20 ./etc/backuppc/
-rw-r--r-- root/root 2243 2013-08-08 11:20 ./etc/backuppc/hosts
-rw-r--r-- root/root 427 2013-08-08 11:20 ./etc/backuppc/localhost.pl
-rw-r--r-- root/root 638 2013-08-08 11:20 ./etc/backuppc/apache.conf
drwxr-xr-x root/root 0 2013-08-08 11:20 ./etc/default/
-rw-r--r-- root/root 36 2013-08-08 11:19 ./etc/default/backuppc
drwxr-xr-x root/root 0 2013-08-08 11:19 ./usr/
drwxr-xr-x root/root 0 2013-08-08 11:20 ./usr/share/
drwxr-xr-x root/root 0 2013-08-08 11:20 ./usr/share/backuppc/
drwxr-xr-x root/root 0 2013-08-08 11:20 ./usr/share/backuppc/image/
-rw-r--r-- root/root 52 2013-08-08 11:20 ./usr/share/backuppc/image/0000000.gif
-rw-r--r-- root/root 55 2013-08-08 11:20 ./usr/share/backuppc/image/0000011.gif
-rw-r--r-- root/root 49 2013-08-08 11:20 ./usr/share/backuppc/image/0001000.gif
-rw-r--r-- root/root 52 2013-08-08 11:20 ./usr/share/backuppc/image/0010000.gif
-rw-r--r-- root/root 62 2013-08-08 11:20 ./usr/share/backuppc/image/0010001.gif
-rw-r--r-- root/root 64 2013-08-08 11:20 ./usr/share/backuppc/image/0011000.gif
-rw-r--r-- root/root 65 2013-08-08 11:20 ./usr/share/backuppc/image/0011001.gif
-rw-r--r-- root/root 55 2013-08-08 11:20 ./usr/share/backuppc/image/1000000.gif
-rw-r--r-- root/root 55 2013-08-08 11:20 ./usr/share/backuppc/image/1000100.gif
-rw-r--r-- root/root 56 2013-08-08 11:20 ./usr/share/backuppc/image/1001000.gif
-rw-r--r-- root/root 56 2013-08-08 11:20 ./usr/share/backuppc/image/1001100.gif
-rw-r--r-- root/root 57 2013-08-08 11:20 ./usr/share/backuppc/image/1010000.gif
-rw-r--r-- root/root 57 2013-08-08 11:20 ./usr/share/backuppc/image/1010001.gif
-rw-r--r-- root/root 59 2013-08-08 11:20 ./usr/share/backuppc/image/1011000.gif
-rw-r--r-- root/root 66 2013-08-08 11:20 ./usr/share/backuppc/image/1100000.gif
-rw-r--r-- root/root 63 2013-08-08 11:20 ./usr/share/backuppc/image/1100100.gif
-rw-r--r-- root/root 63 2013-08-08 11:20 ./usr/share/backuppc/image/1100101.gif
-rw-r--r-- root/root 63 2013-08-08 11:20 ./usr/share/backuppc/image/1100110.gif
-rw-r--r-- root/root 63 2013-08-08 11:20 ./usr/share/backuppc/image/1100111.gif
-rw-r--r-- root/root 69 2013-08-08 11:20 ./usr/share/backuppc/image/1101000.gif
-rw-r--r-- root/root 64 2013-08-08 11:20 ./usr/share/backuppc/image/1101100.gif
-rw-r--r-- root/root 64 2013-08-08 11:20 ./usr/share/backuppc/image/1101101.gif
-rw-r--r-- root/root 64 2013-08-08 11:20 ./usr/share/backuppc/image/1101110.gif
-rw-r--r-- root/root 64 2013-08-08 11:20 ./usr/share/backuppc/image/1101111.gif
-rw-r--r-- root/root 67 2013-08-08 11:20 ./usr/share/backuppc/image/1110000.gif
-rw-r--r-- root/root 67 2013-08-08 11:20 ./usr/share/backuppc/image/1110001.gif
-rw-r--r-- root/root 67 2013-08-08 11:20 ./usr/share/backuppc/image/1110100.gif
-rw-r--r-- root/root 67 2013-08-08 11:20 ./usr/share/backuppc/image/1110101.gif
-rw-r--r-- root/root 67 2013-08-08 11:20 ./usr/share/backuppc/image/1110110.gif
-rw-r--r-- root/root 67 2013-08-08 11:20 ./usr/share/backuppc/image/1110111.gif
-rw-r--r-- root/root 70 2013-08-08 11:20 ./usr/share/backuppc/image/1111000.gif
-rw-r--r-- root/root 70 2013-08-08 11:20 ./usr/share/backuppc/image/1111001.gif
-rw-r--r-- root/root 69 2013-08-08 11:20 ./usr/share/backuppc/image/1111100.gif
-rw-r--r-- root/root 69 2013-08-08 11:20 ./usr/share/backuppc/image/1111101.gif
-rw-r--r-- root/root 69 2013-08-08 11:20 ./usr/share/backuppc/image/1111110.gif
-rw-r--r-- root/root 69 2013-08-08 11:20 ./usr/share/backuppc/image/1111111.gif
-rw-r--r-- root/root 766 2013-08-08 11:20 ./usr/share/backuppc/image/favicon.ico
-rw-r--r-- root/root 420 2013-08-08 11:20 ./usr/share/backuppc/image/icon-dir.png
-rw-r--r-- root/root 441 2013-08-08 11:20 ./usr/share/backuppc/image/icon-file.png
-rw-r--r-- root/root 710 2013-08-08 11:20 ./usr/share/backuppc/image/icon-hardlink.png
-rw-r--r-- root/root 659 2013-08-08 11:20 ./usr/share/backuppc/image/icon-symlink.png
-rw-r--r-- root/root 1394 2013-08-08 11:20 ./usr/share/backuppc/image/logo.gif
-rw-r--r-- root/root 4021 2013-08-08 11:20 ./usr/share/backuppc/image/BackupPC_stnd.css
-rw-r--r-- root/root 3363 2013-08-08 11:20 ./usr/share/backuppc/image/BackupPC_stnd_orig.css
-rw-r--r-- root/root 6463 2013-08-08 11:20 ./usr/share/backuppc/image/sorttable.js
drwxr-xr-x root/root 0 2013-08-08 11:20 ./usr/share/backuppc/conf/
-rw-r--r-- root/root 85159 2013-08-08 11:20 ./usr/share/backuppc/conf/config.pl
drwxr-xr-x root/root 0 2013-08-08 11:20 ./usr/share/backuppc/bin/
-rwxr-xr-x root/root 75493 2013-08-08 11:20 ./usr/share/backuppc/bin/BackupPC
-rwxr-xr-x root/root 11420 2013-08-08 11:20 ./usr/share/backuppc/bin/BackupPC_archive
-rwxr-xr-x root/root 5330 2013-08-08 11:20 ./usr/share/backuppc/bin/BackupPC_archiveHost
-rwxr-xr-x root/root 4036 2013-08-08 11:20 ./usr/share/backuppc/bin/BackupPC_archiveStart
-rwxr-xr-x root/root 2215 2013-08-08 11:20 ./usr/share/backuppc/bin/BackupPC_attribPrint
-rwxr-xr-x root/root 53673 2013-08-08 11:20 ./usr/share/backuppc/bin/BackupPC_dump
-rwxr-xr-x root/root 7783 2013-08-08 11:20 ./usr/share/backuppc/bin/BackupPC_fixupBackupSummary
-rwxr-xr-x root/root 9269 2013-08-08 11:20 ./usr/share/backuppc/bin/BackupPC_link
-rwxr-xr-x root/root 11383 2013-08-08 11:20 ./usr/share/backuppc/bin/BackupPC_nightly
-rwxr-xr-x root/root 19037 2013-08-08 11:20 ./usr/share/backuppc/bin/BackupPC_restore
-rwxr-xr-x root/root 15095 2013-08-08 11:20 ./usr/share/backuppc/bin/BackupPC_sendEmail
-rwxr-xr-x root/root 2490 2013-08-08 11:20 ./usr/share/backuppc/bin/BackupPC_serverMesg
-rwxr-xr-x root/root 2120 2013-08-08 11:20 ./usr/share/backuppc/bin/BackupPC_trashClean
-rwxr-xr-x root/root 18627 2013-08-08 11:20 ./usr/share/backuppc/bin/BackupPC_tarExtract
-rwxr-xr-x root/root 19209 2013-08-08 11:20 ./usr/share/backuppc/bin/BackupPC_tarCreate
-rwxr-xr-x root/root 17769 2013-08-08 11:20 ./usr/share/backuppc/bin/BackupPC_tarPCCopy
-rwxr-xr-x root/root 9941 2013-08-08 11:20 ./usr/share/backuppc/bin/BackupPC_zipCreate
-rwxr-xr-x root/root 2163 2013-08-08 11:20 ./usr/share/backuppc/bin/BackupPC_zcat
drwxr-xr-x root/root 0 2013-08-08 11:20 ./usr/share/backuppc/doc/
drwxr-xr-x root/root 0 2013-08-08 11:20 ./usr/share/backuppc/lib/
drwxr-xr-x root/root 0 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/
drwxr-xr-x root/root 0 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/CGI/
-rw-r--r-- root/root 1637 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/CGI/AdminOptions.pm
-rw-r--r-- root/root 9170 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/CGI/Archive.pm
-rw-r--r-- root/root 2745 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/CGI/ArchiveInfo.pm
-rw-r--r-- root/root 10703 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/CGI/Browse.pm
-rw-r--r-- root/root 5592 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/CGI/DirHistory.pm
-rw-r--r-- root/root 56529 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/CGI/EditConfig.pm
-rw-r--r-- root/root 2807 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/CGI/EmailSummary.pm
-rw-r--r-- root/root 6375 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/CGI/GeneralInfo.pm
-rw-r--r-- root/root 16390 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/CGI/HostInfo.pm
-rw-r--r-- root/root 18077 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/CGI/Lib.pm
-rw-r--r-- root/root 3028 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/CGI/LOGlist.pm
-rw-r--r-- root/root 2624 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/CGI/Queue.pm
-rw-r--r-- root/root 1560 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/CGI/ReloadServer.pm
-rw-r--r-- root/root 6684 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/CGI/RestoreFile.pm
-rw-r--r-- root/root 3526 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/CGI/RestoreInfo.pm
-rw-r--r-- root/root 11685 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/CGI/Restore.pm
-rw-r--r-- root/root 5046 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/CGI/RSS.pm
-rw-r--r-- root/root 2108 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/CGI/StartServer.pm
-rw-r--r-- root/root 3737 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/CGI/StartStopBackup.pm
-rw-r--r-- root/root 1719 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/CGI/StopServer.pm
-rw-r--r-- root/root 6523 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/CGI/Summary.pm
-rw-r--r-- root/root 8386 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/CGI/View.pm
drwxr-xr-x root/root 0 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Config/
-rw-r--r-- root/root 19107 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Config/Meta.pm
drwxr-xr-x root/root 0 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Lang/
-rw-r--r-- root/root 53130 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Lang/cz.pm
-rw-r--r-- root/root 57587 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Lang/de.pm
-rw-r--r-- root/root 52806 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Lang/en.pm
-rw-r--r-- root/root 56473 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Lang/es.pm
-rw-r--r-- root/root 57794 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Lang/fr.pm
-rw-r--r-- root/root 57084 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Lang/it.pm
-rw-r--r-- root/root 57342 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Lang/nl.pm
-rw-r--r-- root/root 55021 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Lang/pl.pm
-rw-r--r-- root/root 55656 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Lang/pt_br.pm
-rw-r--r-- root/root 56042 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Lang/zh_CN.pm
drwxr-xr-x root/root 0 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Storage/
-rw-r--r-- root/root 14553 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Storage/Text.pm
drwxr-xr-x root/root 0 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Xfer/
-rw-r--r-- root/root 3107 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Xfer/Archive.pm
-rw-r--r-- root/root 27186 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Xfer/Ftp.pm
-rw-r--r-- root/root 9732 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Xfer/Protocol.pm
-rw-r--r-- root/root 17407 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Xfer/Rsync.pm
-rw-r--r-- root/root 15607 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Xfer/RsyncDigest.pm
-rw-r--r-- root/root 47580 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Xfer/RsyncFileIO.pm
-rw-r--r-- root/root 12247 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Xfer/Smb.pm
-rw-r--r-- root/root 8313 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Xfer/Tar.pm
drwxr-xr-x root/root 0 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Zip/
-rw-r--r-- root/root 4626 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Zip/FileMember.pm
-rw-r--r-- root/root 8794 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Attrib.pm
-rw-r--r-- root/root 11310 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Config.pm
-rw-r--r-- root/root 12963 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/FileZIO.pm
-rw-r--r-- root/root 41766 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Lib.pm
-rw-r--r-- root/root 21079 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/PoolWrite.pm
-rw-r--r-- root/root 2764 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Storage.pm
-rw-r--r-- root/root 19728 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/View.pm
-rw-r--r-- root/root 5070 2013-08-08 11:20 ./usr/share/backuppc/lib/BackupPC/Xfer.pm
drwxr-xr-x root/root 0 2013-08-08 11:20 ./usr/share/backuppc/lib/Net/
drwxr-xr-x root/root 0 2013-08-08 11:20 ./usr/share/backuppc/lib/Net/FTP/
-rw-r--r-- root/root 9741 2013-08-08 11:20 ./usr/share/backuppc/lib/Net/FTP/AutoReconnect.pm
-rw-r--r-- root/root 14232 2013-08-08 11:20 ./usr/share/backuppc/lib/Net/FTP/RetrHandle.pm
-rwxr-xr-x root/root 3993 2013-08-08 11:20 ./usr/share/backuppc/lib/realindex.cgi
drwxr-xr-x root/root 0 2013-08-08 11:20 ./usr/share/backuppc/cgi-bin/
drwxr-xr-x root/root 0 2013-08-08 11:20 ./usr/share/doc/
drwxr-xr-x root/root 0 2013-08-08 11:20 ./usr/share/doc/backuppc/
-rw-r--r-- root/root 3918 2013-08-08 11:19 ./usr/share/doc/backuppc/README.Debian
-rw-r--r-- root/root 1092 2013-08-08 11:19 ./usr/share/doc/backuppc/copyright
drwxr-xr-x root/root 0 2013-08-08 11:20 ./usr/share/doc/backuppc/examples/
-rw-r--r-- root/root 427 2013-08-08 11:19 ./usr/share/doc/backuppc/examples/localhost.pl
-rw-r--r-- root/root 577 2013-08-08 11:19 ./usr/share/doc/backuppc/examples/mysql.pl
-rw-r--r-- root/root 248 2013-08-08 11:19 ./usr/share/doc/backuppc/examples/rsyncd.pl
-rw-r--r-- root/root 280 2013-08-08 11:19 ./usr/share/doc/backuppc/examples/rsyncssh.pl
-rw-r--r-- root/root 349 2013-08-08 11:19 ./usr/share/doc/backuppc/examples/smb.pl
-rw-r--r-- root/root 857 2013-08-08 11:19 ./usr/share/doc/backuppc/examples/tarssh-sudo.pl
-rw-r--r-- root/root 277 2013-08-08 11:19 ./usr/share/doc/backuppc/examples/tarssh.pl
-rw-r--r-- root/root 234511 2013-08-08 11:20 ./usr/share/doc/backuppc/BackupPC.html
-rw-r--r-- root/root 2494 2011-04-25 03:31 ./usr/share/doc/backuppc/README.gz
-rw-r--r-- root/root 55875 2013-08-08 11:20 ./usr/share/doc/backuppc/BackupPC.pod.gz
-rw-r--r-- root/root 5408 2013-08-08 11:19 ./usr/share/doc/backuppc/changelog.Debian.gz
-rw-r--r-- root/root 25048 2011-04-25 03:31 ./usr/share/doc/backuppc/changelog.gz
drwxr-xr-x root/root 0 2013-08-08 11:20 ./usr/share/doc-base/
-rw-r--r-- root/root 236 2013-08-08 11:19 ./usr/share/doc-base/backuppc
drwxr-xr-x root/root 0 2013-08-08 11:20 ./usr/share/menu/
-rw-r--r-- root/root 154 2013-08-08 11:19 ./usr/share/menu/backuppc
drwxr-xr-x root/root 0 2013-08-08 11:20 ./usr/share/man/
drwxr-xr-x root/root 0 2013-08-08 11:20 ./usr/share/man/man8/
-rw-r--r-- root/root 61676 2013-08-08 11:20 ./usr/share/man/man8/backuppc.8.gz
drwxr-xr-x root/root 0 2013-08-08 11:19 ./usr/lib/
drwxr-xr-x root/root 0 2013-08-08 11:19 ./usr/lib/backuppc/
drwxr-xr-x root/root 0 2013-08-08 11:20 ./usr/lib/backuppc/cgi-bin/
-rwxr-xr-x root/root 2892 2013-08-08 11:20 ./usr/lib/backuppc/cgi-bin/index.cgi
drwxr-xr-x root/root 0 2013-08-08 11:20 ./var/
drwxr-xr-x root/root 0 2013-08-08 11:20 ./var/lib/
drwxr-xr-x root/root 0 2013-08-08 11:20 ./var/lib/backuppc/
drwxr-xr-x root/root 0 2013-08-08 11:20 ./var/lib/backuppc/pool/
drwxr-xr-x root/root 0 2013-08-08 11:20 ./var/lib/backuppc/cpool/
drwxr-xr-x root/root 0 2013-08-08 11:20 ./var/lib/backuppc/pc/
drwxr-xr-x root/root 0 2013-08-08 11:20 ./var/lib/backuppc/trash/
drwxr-xr-x root/root 0 2013-08-08 11:20 ./var/lib/backuppc/log/
lrwxrwxrwx root/root 0 2013-08-08 11:20 ./usr/share/backuppc/cgi-bin/index.cgi -> ../../../lib/backuppc/cgi-bin/index.cgi
lrwxrwxrwx root/root 0 2013-08-08 11:20 ./usr/share/backuppc/cgi-bin/image -> ../image
┌──────────────────────────────────────────────────────────────────────────────┐
│ Post Build │
└──────────────────────────────────────────────────────────────────────────────┘
┌──────────────────────────────────────────────────────────────────────────────┐
│ Cleanup │
└──────────────────────────────────────────────────────────────────────────────┘
Purging /«BUILDDIR»
Not cleaning session: cloned chroot in use
┌──────────────────────────────────────────────────────────────────────────────┐
│ Summary │
└──────────────────────────────────────────────────────────────────────────────┘
Build Architecture: armhf
Build-Space: 5868
Build-Time: 33
Distribution: jessie-staging
Host Architecture: armhf
Install-Time: 153
Job: backuppc_3.2.1-5.1
Machine Architecture: armhf
Package: backuppc
Package-Time: 278
Source-Version: 3.2.1-5.1
Space: 5868
Status: successful
Version: 3.2.1-5.1+b3
────────────────────────────────────────────────────────────────────────────────
Finished at 20130808-1120
Build needed 00:04:38, 5868k disc space